[Q] messed flashcreen no bootescreen when flashing any rom - Galaxy Note II Q&A, Help & Troubleshooting

whenever i flash any custom rom whether the rom version is android 4.2/4.1.2/4.1.1 , my phone has no bootscreen and a messed up flashscreen when it sais (samsung galaxy note 2 GT-N7100) but then after waiting the appropriate time, the rom works fine but same problem when rebooting... i attached the flashcreen and how it looks like, i have no idea why this happens.i just press the lockscreen after rebooting and waiting and the rom works normally. i rooted using the Galaxy Note II Toolkit v3.0.0 GSM. i first experienced this right after flashing and entering recovery(cmw) but twrp worked fine then, now any rom i flash i experience this,
Is anyone faceing a similar problem or can help in anyway ?
I am using Samsung Galaxy note II GT-N7100

possible hardware issue.. have you tried reflashing the original firmware?

yes it works fine
agent_so said:
possible hardware issue.. have you tried reflashing the original firmware?
Click to expand...
Click to collapse
yes both screens work fine on stock rom after restoring ...so i dont think its an hardware issue

Related

[Q] Device hangs when going in to sleep mode + no usb

Hey, my previous thread got burried and the problem is kind of different any way, i also did some thinking and i can better explain the issue
I some how managed to try and instal an S3 omega rom on my Note 2
device got stuck in "Samsung galaxy note 2" screen
i turned it on and off, it loaded the stock rom
[*]However there was a problem, the device would hang after the screen would go to sleep
[*]and the pc wouldnt recognise the phone via USB
So i tried to instal the correct note 2 rom, it went smoothly but the screen and usb issue was still there, since then i tried to instal all kinds of stock and not stock roms, the issue is still there, i tried to to a mega wipe, etc, nothing seems to work.
Please help me, im completely lost :<
Try a different kernel
Sent From Samsung's Galaxy Note II Using Internet
UtkarshGupta said:
Try a different kernel
Sent From Samsung's Galaxy Note II Using Internet
Click to expand...
Click to collapse
I tried to install perseus, no dice. :crying:
Don't know what's happening. If you cleaned each partition I.e. cache, dalvik, data, system then it shouldn't be a problem. Trying different kernel doesn't solve it strange...
Sent From Samsung's Galaxy Note II Using Internet
hello i know i didnt start this thread but instead of oppening another i have the exact problem
somehow i flashed s3 rom and now no usb and if my phone goes o sleep doesnt respond need to reboot it
i have returned it to stock rome and root it again
every time the same thing
well, atleast i know for sure THATS the cause, and that im not the only retard who tried to flash an s3 rom :>
the thing is what can we do to have our phones back to normal
its really annoying having to turn the phone back one ever 10-15 mins
I've been trying to figure this out for the past 2 days, and i dont think theres a solution, what im doing now is trying to reset the flash counter and flash the stock rom, then go to samsung for them to fix it,

[Q] Touch is Auto Responding without touching

Hey guys I have white galaxy nexus maguro.
The problem I facing is quite strange and I want help.
I have been using my phone from more than 6 months my phone works fine with stock rom i tried installing rom before months back a custom rom and it was CM 10.1 my phone touch starts to respond after sometimes clicks are happening everywhere i changed rom back to stock and problem goes.
So now after many months i came to know about this amazing rom for gnexus CrDroid based on Cm10.2
I just installed it and the problem i faced before is here again.
So conclusion to all this is my screen touch response is extra sensitive or i dont know what happens with it when i install a custom rom on it,
On stock rom its fine,
So what you guys think i should do or anyone else had the problem like that if they solved it please help thanks
Nuke_- said:
Hey guys I have white galaxy nexus maguro.
The problem I facing is quite strange and I want help.
I have been using my phone from more than 6 months my phone works fine with stock rom i tried installing rom before months back a custom rom and it was CM 10.1 my phone touch starts to respond after sometimes clicks are happening everywhere i changed rom back to stock and problem goes.
So now after many months i came to know about this amazing rom for gnexus CrDroid based on Cm10.2
I just installed it and the problem i faced before is here again.
So conclusion to all this is my screen touch response is extra sensitive or i dont know what happens with it when i install a custom rom on it,
On stock rom its fine,
So what you guys think i should do or anyone else had the problem like that if they solved it please help thanks
Click to expand...
Click to collapse
You didn't do anything wrong while flashing? Or maybe a mod? Maybe even an app? You could try to flash the ROM and don't install apps and see how that goes for some days. If that doesnt work maybe you could flash stock via fastboot and then flash the ROM.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You didn't do anything wrong while flashing? Or maybe a mod? Maybe even an app? You could try to flash the ROM and don't install apps and see how that goes for some days. If that doesnt work maybe you could flash stock via fastboot and then flash the ROM.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for replying
No I didn't do anything wrong its not my first andriod phone even tho that post was first one on xda never ran into problem.
I think its problem with gnexus many people have different issues with roms but mine is just that its giving me issues on custom roms tried many things flashing again dirty flashed everything.
on stock problem is gone but on the ones i mentioned i am getting this bug that i cant even use my phone i unlock it and touch starts to respond all over the screen
Hey guys since i am testing i just installed slimbean and its working perfectly just like how stock behaves so can someone tell me what slimbean 4.3 and Stock 4.3 have in common and what CM10.2 has not and giving me issues?

Wifi issue on AOSP Roms

Hi guys,
I have had the s2,s3,galaxy nexus,original note and i am used to flashing and modifying,but i have a serious issue with the note 2.
The problem is whenever i flash AOSP rom(cm,aokp,pa) my wifi would not connect.It shows the name of the network and when i click conenct nothing happens.Flashing back TW rom fixes it,wifi works like a charm. I've done full wipes but it doesn't seem to resolve the issue.I tried different kernels,but that doesn't help either.
So I am stuck at TW roms and i hate that.Anyone has any ideas?
You can try options 2 and 3 from this thread.
Thanks for your reply,but i tried this and it didn't solve my problem.
Anyone?
spookhc said:
Anyone?
Click to expand...
Click to collapse
I Have the same problem...
Not sure that it will help you but I read something yesterday about this issue.
The solution was to NOT restore your Google profile during first boot so you should full wipe and try again.
Primokorn said:
Not sure that it will help you but I read something yesterday about this issue.
The solution was to NOT restore your Google profile during first boot so you should full wipe and try again.
Click to expand...
Click to collapse
This actually has nothing to do with the problem.
After a few days I finally found the cause ,and therefore,a decision to the problem.
It is the bootloader from 4.3 sammy leaks.It seems that this new leaks(probably the reason being KNOX) cause malfunction of wifi in aosp roms.What i did was ODIN flash stock MG1 from sammobile .This brought back stock recovery so i had to flash TWRP again and it solved the issue for me.
Before that i had tried changing roms,kernels,recovery,modems and nothing worked so I am pretty sure it is the new 4.3 leaks bootloader.
Some people will say that it can\t be the issue because they are using 4.3 sammy and do not experience the same problem on aosp roms,but i think thats because they flash it through CMW ,which doesn't change bootloader,while flashing through ODIN does.
With my Note2 this is not the solution. I've tried everything. What you said, move file "pit" ..... but nothing. I can not connect wifi. The connection does not appear region Spain, and have opted to choose europe, but neither. I do not know to do. CM 10.1 also does not work WIFI. In Stock ROM or Custom ROM works fine fine, but in ROM CM 10.1, 10.2, AOKP don't work.
spookhc said:
This actually has nothing to do with the problem.
After a few days I finally found the cause ,and therefore,a decision to the problem.
It is the bootloader from 4.3 sammy leaks.It seems that this new leaks(probably the reason being KNOX) cause malfunction of wifi in aosp roms.What i did was ODIN flash stock MG1 from sammobile .This brought back stock recovery so i had to flash TWRP again and it solved the issue for me.
Before that i had tried changing roms,kernels,recovery,modems and nothing worked so I am pretty sure it is the new 4.3 leaks bootloader.
Some people will say that it can\t be the issue because they are using 4.3 sammy and do not experience the same problem on aosp roms,but i think thats because they flash it through CMW ,which doesn't change bootloader,while flashing through ODIN does.
Click to expand...
Click to collapse

Please help -- flashed something wrong mobile freezing and getting bootloops

Dears
i flashed my mobile with kitkat custom rom and everything was going ok then i faced imei problem so i flashed wrong modem through twrp , after that
when mobile restarted samsung n7100 the firest logo got longer time than usual and when mobile started into rom , when rom loaded mobile get frozen then restarting
this is the modem file what i was flashed
http://d-h.st/xGb
please anyone help
thnx
i think i flashed Samsung S3 I9300 modem in my note 2
what should i do to fix this issue ? please help
go back to the latest stock (available i.e. sammobile), next time make sure you have the right one
yaro666 said:
go back to the latest stock (available i.e. sammobile), next time make sure you have the right one
Click to expand...
Click to collapse
i already flashed stock from sammobile after flash rom , i am stuck on bootloop and some times its get many errors then getting in bootloop again
Any help please
Can I flash T889 tmobile note 2 with att note 2's radio? t mobile doesnt seem to work with 5.0 android.

[Q]

Hello XDA. Currently I own a Samsung Galaxy S3 SGH T999 from T-Mobile. As soon as I got it I had my cousin root it for me. For a while I had no issues flashing ROMS. The ROM I am using is AVATAR 4.2.2. I am noticing now that when I go to flash a new ROM it stays in the boot logo screen. It does that with just about every ROM I try to flash. I went back to my cousin and he updated TWRP for me. To this day I am still having the same problem. I am not sure what is going on please help me.
ghostgaming said:
Hello XDA. Currently I own a Samsung Galaxy S3 SGH T999 from T-Mobile. As soon as I got it I had my cousin root it for me. For a while I had no issues flashing ROMS. The ROM I am using is AVATAR 4.2.2. I am noticing now that when I go to flash a new ROM it stays in the boot logo screen. It does that with just about every ROM I try to flash. I went back to my cousin and he updated TWRP for me. To this day I am still having the same problem. I am not sure what is going on please help me.
Click to expand...
Click to collapse
Be aware that you need to completely wipe your phone when switching between ROMs (does not apply if you are upgrading to a newer version of the same ROM). Flashing over can cause issues like yours.

Categories

Resources