Related
[KERNEL][NIGHTLY - 223-JB] franco.Kernel | Linaro Experimental Builds & Discussion
franco.Kernel - Linaro Builds
This is a thread solely for the discussion of the Linaro builds of franco.kernel. Franco gave his permission for this thread however he offers no support for any bugs experienced with these builds, please do not PM with his questions about this toolchain. Linaro builds are compiled with a high level of compiler optimization which can introduce glitches into the kernel, these builds are experimental. Feel free to discuss performance, post benchmarks and report bugs. I'll try to keep up with his nightly versions as he releases the source code and compile them with the Linaro toolchain.
franco.Kernel features:
Overclock CPU up to 1804 MHz
Overclocked GPU to 512 MHz
Voltage Control
Built with GCC version 4.7.1 20120531 (prerelease) (Linaro GCC 2012.06)
Downloads:
Kernel: See the foot of this post
franco.Kernel updater app: https://market.android.com/details?id=com.franco.kernel
franco.Kernel updater app from AndroidPit: http://www.androidpit.com/en/android/market/apps/app/com.franco.kernel/franco-Kernel-updater
Install Instructions:
Go to the website below and navigate to the folder with the highest number
Download one of the archives
Drop it onto your SD card
Flash it in recovery
franco.Kernel updater app features:
Downloads the kernel directly from the ftp
Checks for updates directly from the ftp
Checks and downloads Imoseyon's kernel (new feature)
Kernel auto-flash
Cpu frequencies changer
Governor changer
Voltage control interface
Color Control - You're able to change GAMMA values and Color Multipliers to achieve the best color profile
Sound Control - Increase the max volume of your device
Download special franco.Kernel boot animation
Wi-fi special mode to boost signal during streaming while on screen off
Custom download path
Live calibrated voltages panel
Disable logger
Dedicated milestone and nightly kernels changelogs
Source: https://github.com/franciscofranco/Tuna_JB_pre1/tree/4.1
Enjoy!
I've found a bug, what shall I do?
First of all, make sure this bug does not occur on the non-linaro Franco kernel. Second, make sure it's not caused by your rom, if you've flashed this kernel at the same time you flashed a linaro ROM, it's much more likely the issue is caused by a bug in the ROM.
If you're sure that the bug is definitely specific to the linaro franco kernels, post your logcat and kmsg (from /proc/last_kmsg - if you encounter a bug, reboot first in order to generate /proc/last_kmsg, then grab it and upload it), along with the name of the kernel .zip you flashed and ideally instructions on how to reproduce the bug.
Current Known Issues:
None
READ THIS:
What's different about the *.5pcOC.* archives?
This kernel is built with a 5% static board overclock, as of r186 Franco's normal builds no longer use any static board overclock. Your phone may not be able to handle this, if you get stuck on the google logo flash back to another release without the overclock.
What's different about the *.10pcOC.* archives?
This kernel is built with a 10% static board overclock rather than a 5% static board overclock, give it a go if you want.
Builds 207 and onwards are Jelly Bean only
Download link for all builds: http://franconexus.servehttp.com/
Thanks, will give it at try...
Sent from my Galaxy Nexus using xda premium
Great job thanks for this thread! Can you perhaps create builds without the 5% static board over clock doo daa so people like me who's nexus' don't like it will be able to boot?
Edit
Been using this a for a while now and I got to say to the performance is amazing and loving finally being able to use the newer builds
Sent from my Galaxy Nexus
The Gingerbread Man said:
Great job thanks for this thread! Can you perhaps create builds without the 5% static board over clock doo daa so people like me who's nexus' don't like it will be able to boot?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Yep, I'll compile them after I post the normal builds of each nightly.
Also trying. But my phone usually doesn't like 512 gpu....
rogersnm said:
Yep, I'll compile them after I post the normal builds of each nightly.
Click to expand...
Click to collapse
Awsome just thought I'd check
I don't know if its tj fact that finally I'm on 185 or this linaro business (after not being able to go further than m4) but my nexus is flyyyyying now
Sent from my Galaxy Nexus
Tried flashing this on my Galaxy Nexus CM9/Linaro build and both kernels never got past the Google boot screen. Flashed back the Milestone 4 kernel and everything is working again.
shafty023 said:
Tried flashing this on my Galaxy Nexus CM9/Linaro build and both kernels never got past the Google boot screen. Flashed back the Milestone 4 kernel and everything is working again.
Click to expand...
Click to collapse
This is a known issue with certain phones that arises because they are unable to run the 5% static overclock, the *.doc.* zips in the OP don't include this and they should allow you to boot up as normal.
rogersnm said:
This is a known issue with certain phones that arises because they are unable to run the 5% static overclock, the attached build doesn't include this and it should allow you to boot up as normal.
Click to expand...
Click to collapse
Awesome that did the trick. Thanks!
rogersnm said:
This is a known issue with certain phones that arises because they are unable to run the 5% static overclock, the attached build doesn't include this and it should allow you to boot up as normal.
Click to expand...
Click to collapse
What gpu setting does this one run on?
Sent from my Sprint Galaxy Nexus CDMA using XDA
pastert33 said:
What gpu setting does this one run on?
Sent from my Sprint Galaxy Nexus CDMA using XDA
Click to expand...
Click to collapse
I just added a freshly compiled doc.512GPU to the OP, I'll add the doc.384GPU one tomorrow.
For reference "doc" in the filename stands for Disabled Overclock, it means the build does not have the 5% static overclock. It does still allow you to apply a CPU overclock.
not sure if placebo but my nexus seems to be flying more then usual too
(rascream 6-01 build, franco 512 w/ linaro)
P.S. thx for the awesome build
Can someone confirm this is working on toroplus??
Sent from my Galaxy Nexus using xda premium
wingswrath said:
not sure if placebo but my nexus seems to be flying more then usual too
Click to expand...
Click to collapse
I'm hoping rascream will do a linaro version of their rom as this linaro stuff is meant to effect roms builds more than kernel from what I read around. Just imagine the potential man
Sent from my Galaxy Nexus
rogersnm said:
I just added a freshly compiled doc.512GPU to the OP, I'll add the doc.384GPU one tomorrow.
For reference "doc" in the filename stands for Disabled Overclock, it means the build does not have the 5% static overclock. It does still allow you to apply a CPU overclock.
Click to expand...
Click to collapse
Was that a 384 you posted for me or 512?
mookiejr05 said:
Can someone confirm this is working on toroplus??
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yes but only the .doc version
mookiejr05 said:
Can someone confirm this is working on toroplus??
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yes will work fine
shafty023 said:
Was that a 384 you posted for me or 512?
Click to expand...
Click to collapse
512, 384 will come tomorrow. You should try the 512 you can really tell the difference scrolling
Sent from my Galaxy Nexus
The new rascream ROM came out today....guess it has some linaro from the upstream AOSP, not too sure.
Sent from my Galaxy Nexus using xda premium
is it normal that i can download books with this kernel in germany ?
or is this function new activated in germany and has nothing to do with this kernel ? ?
question 2 : i can use the franco app to make all settings with this kernel ?
[font=verdana,geneva,sans-serif]Nyan Kernel Tuna[/font]
By Marcusant
________________________________________________________________________________________________________
Info
________________________________________________________________________________________________________
Source: http://github.com/ma...t/Nyan-Tuna-JB/
Nyan Colonel was originally created for the Epic 4G as an effort to bring all of the features from other Hummingbird devices to the Epic. Now I have used my upgrade on a Galaxy Nexus and have been trying many different kernels and every one seems to have some features and be missing others. I have attempted to add as much features I can while still keeping the kernel lean and fast with great battery life. This does not require you to be some crazy linux enthusiast in order to modify, or charge you for an app capable of tuning it. It comes with the trickstermod app in order to tweak the kernel to your needs in case the preset settings don't fit your user type.
If you need help, feel free to gtalk me, I don't bite (most of the time): [email protected]
Also, if you feel I have helped, up my rep or even donate
________________________________________________________________________________________________________
Features
________________________________________________________________________________________________________
Bold = Default
CPU Governors
PegasusQ - A mix of performance and battery life that hotplugs the cpu at low use
Interactive - Boosts frequency based on load put on by the user. Modified to also boost on touch of the screen.
Ondemand - Basic scale on demand governor with no hotplugging
HotplugX - Ondemand modified to hotplug at low use and screen off
Wheatley - Basically ondemand (scales depending on demand) that is modified for performance
Lazy - Basically conservative (scales gradually depending on load) that is modified for performance
Schedulers
SIO - A mix of NOOP and Deadline made for flash memory, like the GNex has
BFQ - Currently experimental. For heavy IO load
CFQ - Attempts to distribute the disk fairly among processes
Deadline - Imposes a deadline on processes to prevent lack of resources
NOOP - Simplest scheduler. Good for flash memory.
CPU Frequencies (MHz)
230, 384, 729, 1030, 1228, 1305, 1420, 1536, 1612, 1728, 1804
GPU Frequencies (MHz)
Set by running: echo # > /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc
echo 0 = 308MHz
echo 1 = 384
echo 2 = 512
If you don't like using command lines, you can edit the gpu_oc file with es file explorer and change it from 0 to 1 or 2
Misc Features
Feature - Default Setting
Max Screen Off - 384000
Read Ahead Buffer Size - 2048
TCP Congestion Control - cubic
Wifi High Performance - off
Fast Charge - off
High Performance Sound - off
Vibrator Strength - 1400
Battery Life Extender - 100
FSYNC Control - off
Temperature Limit - 64
SmartReflex - All options ON
Voltage Control (too much to list, just screenshot before changing)
Gamma Control - -10
Contrast Control - 6
Color Settings - Default preset
Compiled with Linaro's GCC 4.7
Fixes, speed enhancements, security enhancements, Linux updates, and battery enhancements
________________________________________________________________________________________________________
Credits
________________________________________________________________________________________________________
Koush - "Any Kernel" on-phone boot.img repack
bigeyes0x0 - his free kernel mod app
Ezekeel - All of his fantastic mods and govs I used in Nyan
FranciscoFranco - Speed tweaks and other patches
Linux Contributers - A ton of patches from newer versions of Linux, etc.
Red Hat Linux Developers - A ton of patches
Imoseyon - Patches, governors, etc
Everyone else who I forgot
________________________________________________________________________________________________________
Changelog
________________________________________________________________________________________________________
Rel5
Improved responsiveness
Improved battery life
Updated net drivers
Fixed interactive lag
Added interactive touch boost
Updated to the latest 3.0.x kernel
Filesystem optimizations
Fixed PGM and other module loading apps
Much more
[/LIST]
________________________________________________________________________________________________________
Downloads
________________________________________________________________________________________________________
Latest Version - http://marcusant.com...-Tuna-Rel5.zip
All versions (older/unreleased) - http://marcusant.com/nyankernel/tuna/
First for iSaint
Xda limits for a reason... causes the mobile app to crash. Thanks... -_-
Sent From My Toro+ via RED Tapatalk
Thanks Marcusant! Somehow I feel my Nexus is now complete!
MДЯCЦSДИT said:
I will attempt to support this as much as I can on xda, but for several reasons (not that xda sucks... it is a great site, but there were some issues with OP length, etc. and it is hard to update on multiple sites), I have my main thread over at rootzwiki...
Anyways, get the full feature list at rootzwiki and I'll just post a basic overview here on this thread.
Source: http://github.com/marcusant/Nyan-Tuna-JB
Description:
Nyan was originally created to port GSM Galaxy S 1 mods over to the Sprint variant. I have since moved to the Galaxy Nexus and have noticed that whenever I would get a new kernel, I would really miss features from the kernel that I was using prior, so that inspired me to make my own kernel for the Tuna.
Full thread & download links here
Click to expand...
Click to collapse
I'm gonna give this a go thx man!!!
Sent from my Galaxy Nexus using xda premium
Umm... so tapatalk won't show the link
Sent from my Galaxy Nexus using Tapatalk 2
Link is corrected
Sent from my Galaxy Nexus using Tapatalk 2
Omfg epic... I miss getting a space kitty bread fix from my epic 4g, thanks marcusant!
Nice Thanx
Thanks dude... the sprint gnex is growing everyday.
Hey Marcusant is this compatible with gnexusparts? (Color app from cm10)? Hope so!
Sent from my Galaxy Nexus using xda premium
maddoggin said:
Hey Marcusant is this compatible with gnexusparts? (Color app from cm10)? Hope so!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I'm planning on adding support but it currently only works with ezekeel supporting apps. I will probably end up adding the support tomorrow or the day after.
Sent from my Galaxy Nexus using Tapatalk 2
MДЯCЦSДИT said:
I'm planning on adding support but it currently only works with ezekeel supporting apps. I will probably end up adding the support tomorrow or the day after.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
cool man, thanks !
Sent from my Galaxy Nexus using xda premium
maddoggin said:
cool man, thanks !
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Also maddogin it works magic on your ROM its so speedy. complement to the chef thanks again for the kernel.
maddoggin said:
cool man, thanks !
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Building it now with the cm sysfs support
Sent from my Galaxy Nexus using Tapatalk 2
maddoggin said:
Hey Marcusant is this compatible with gnexusparts? (Color app from cm10)? Hope so!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
This version has support... please test
http://marcusant.com/nyankernel/tuna/Nyan-Tuna-Beta2.zip
MДЯCЦSДИT said:
This version has support... please test
http://marcusant.com/nyankernel/tuna/Nyan-Tuna-Beta2.zip
Click to expand...
Click to collapse
Lol when I can't sleep I flash a lot... downloading now.
Edit: seems to be working well. And the color profiles are working as well.
Nyan is really disagreeing with the ondemand governor
Still I prefer this over any of the other kernels here so far, a good blend of features.
Thanks a lot.Awesome!
killersloth said:
Nyan is really disagreeing with the ondemand governor
Still I prefer this over any of the other kernels here so far, a good blend of features.
Click to expand...
Click to collapse
Pegasusq and wheatley are similar. I'll try fixing ondemand.
Sent from my Galaxy Nexus using Tapatalk 2
The final beta 2 (so I heard you like betas, so I made a beta of a beta) changelog will probably be:
1. Modified or possibly reset ondemand
2. CM sysfs support (in the beta 2 posted earlier)(thanks imoseyon)
3. Pegasusq tweaks and fixes (thanks sonicxml)
Sent from my Galaxy Nexus using Tapatalk 2
Ξ Kernel
/'zai/
A re-base of Nyan
________________________________________________________________________________________________________
Info
________________________________________________________________________________________________________
Source: http://github.com/ma...t/Nyan-Tuna-JB/
Nyan Colonel was originally created for the Epic 4G as an effort to bring all of the features from other Hummingbird devices to the Epic. Now I have used my upgrade on a Galaxy Nexus and have been trying many different kernels and every one seems to have some features and be missing others. I have attempted to add as much features I can while still keeping the kernel lean and fast with great battery life. This does not require you to be some crazy linux enthusiast in order to modify, or charge you for an app capable of tuning it. It comes with the trickstermod app in order to tweak the kernel to your needs in case the preset settings don't fit your user type.
If you need help, feel free to gtalk me, I don't bite (most of the time): [email protected]
Also, if you feel I have helped, up my rep or even donate
________________________________________________________________________________________________________
Features
________________________________________________________________________________________________________
Bold = Default
CPU Governors
Interactive - Boosts frequency based on load put on by the user. Modified to also boost on touch of the screen.
PegasusQ - A mix of performance and battery life that hotplugs the cpu at low use
Ondemand - Basic scale on demand governor
Hotplug - Ondemand modified to hotplug at low use
Wheatley - Basically ondemand (scales depending on demand) that is modified for performance
Conservative - Slow scaling up in order to save power (some claim that it does not really make a difference in power)
Lulzactive - Highly customization governor. Use the lulzactive app.
Sakuractive - Ondemand governor modified for the GNex
Schedulers
SIO - A mix of NOOP and Deadline made for flash memory, like the GNex has
BFQ - Currently experimental. For heavy IO load
CFQ - Attempts to distribute the disk fairly among processes
Deadline - Imposes a deadline on processes to prevent lack of resources
NOOP - Simplest scheduler. Good for flash memory.
FIFO - Made for android and flash memory
CPU Frequencies (MHz)
230, 384, 729, 1030, 1228, 1305, 1420, 1536, 1612, 1728, 1804
GPU Frequencies (MHz)
There is currently no choice in gpu freqs as the sysfs interface was buggy and usually did not work. GPU is now always at 384MHz.
Misc Features
Feature - Default Setting
Max Screen Off - 384000
Read Ahead Buffer Size - 2048
TCP Congestion Control - cubic
Wifi High Performance - off
Fast Charge - off
High Performance Sound - off
Vibrator Strength - 1400
Battery Life Extender - 100
FSYNC Control - on
Temperature Limit - 64
SmartReflex - All options ON
Voltage Control (too much to list, just screenshot before changing)
Gamma Control - 0
All governor hotplug on screen off
Color Settings - Default preset
Compiled with Linaro's GCC 4.7
Fixes, speed enhancements, security enhancements, Linux updates, and battery enhancements
________________________________________________________________________________________________________
Credits
________________________________________________________________________________________________________
Koush - "Any Kernel" on-phone boot.img repack
bigeyes0x0 - his free kernel mod app
Ezekeel - All of his fantastic mods and govs I used in Nyan
FranciscoFranco - Speed tweaks and other patches
Linux Contributers - A ton of patches from newer versions of Linux, etc.
Red Hat Linux Developers - A ton of patches
Imoseyon - Patches, governors, etc
Everyone else who I forgot
________________________________________________________________________________________________________
Downloads
________________________________________________________________________________________________________
Latest Version (4.2) - Xi-Kernel-4.2-v1.1.zip
Latest Version (4.1.2) - Xi-Kernel-4.1.2-v1.1.zip
for changelog
First.
Sent from my Galaxy Nexus
second
Hopefully this won't have the sleep issues that other 4.2 kernels have been having... I tried to merge all of the changes that were added in 4.2
Wahoo!! Thanks, bub!
Thanks dude!
So far so good. Lulzactive FTW.
Sent from my Galaxy Nexus
See and I was thinking, this is plenty fast without a kernel. Wrong. This is thing makes 4.2 fly. Thanks:thumbup:
FL0OD said:
See and I was thinking, this is plenty fast without a kernel. Wrong. This is thing makes 4.2 fly. Thanks:thumbup:
Click to expand...
Click to collapse
Please check your deep sleep. Mine wasn't entering deep sleep on 4.2 for some reason even though I fully updated to the 4.2 source.
Sent from my Galaxy Nexus using Tapatalk 2
MДЯCЦSДИT said:
Please check your deep sleep. Mine wasn't entering deep sleep on 4.2 for some reason even though I fully updated to the 4.2 source.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Sent from my Galaxy Nexus using xda app-developers app
FL0OD said:
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Yep, doesn't seem to work... I'll look into it...
Sent from my Galaxy Nexus using Tapatalk 2
Looks like I missed some 4.2 stuff... I'll post a build in a bit that is fixed as far as sleep goes.
Sent from my Galaxy Nexus using Tapatalk 2
Fixed deep sleep. Uploading soon.
Sent from my Galaxy Nexus using Tapatalk 2
v1.1 Released - Fixed wakelocks on 4.2
4.1.2 v1.1 (not sure if this changed much with 4.1, please test): http://marcusant.com/nyankernel/tuna/Xi-Kernel-4.1.2-v1.1.zip
4.2 v1.1: http://marcusant.com/nyankernel/tuna/Xi-Kernel-4.2-v1.1.zip
Sent from my Galaxy Nexus using Tapatalk 2
Fixed
Sigh FML
Sent from my Galaxy Nexus using Xparent ICS Tapatalk 2
Phew nvm
Sent from my Galaxy Nexus using Xparent ICS Tapatalk 2
ÜBER™ said:
Phew nvm
Sent from my Galaxy Nexus using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
what'd you do? clear battery stats?
v3rk said:
what'd you do? clear battery stats?
Click to expand...
Click to collapse
Lol NO, let GPS lock.
Sent from my Nexus 7
hey guys, after 2 weeks learning about kernel i would like to present my kernel for ICS
this kernel is based on arco's 2.6.35 kernel, with some addition on it
this kernel is provided without any guarantee, so make a backup before testing anything
I'M NOT RESPONSIBLE IF YOUR DEVICE BREAKS.
----changelog-----
Code:
[SIZE="2"]--v1.0--[/SIZE]
-added UV/OC
-IO scheduler (SIO,ZEN)
-governor(ondemandx, smartassv2, lulzactive)
-dynamic fsync
-BFS
-maxmem 423MB version (camera not working)
-compiled with linaro 4.7-2012.10-20121022
-O2 optimized[
[SIZE="2"]--V1.1--[/SIZE]
-removed dynamic fsync
-O3 optimized (lower available RAM by 1MB, need confirmation about stability and smoothness)
[SIZE="2"]--V1.2--[/SIZE]
-added zcache
-added snappy compression
-added zero jpeg compression
-lzotweak
-tweak on memcopy
[SIZE="2"]--V1.3--[/SIZE]
-fast charge support
-sfb activated
-tiny rcu(activate)
-noatime default
-extreme under voltage get addition +25mV
-hadi mode memory(378MB RAM with camera and hd record/playback working)
[SIZE="2"]--V1.4--[/SIZE]
-write cache disabled
-ntfs support
-cifs built in
-some compiler optimization
-sfb deleted
-fully O3 optimized
-changed bootsplash by ipromeh
-hopefully fixed internet problems
[SIZE="2"]--V1.5--[/SIZE]
-reenable write cache for better write speed
-remove zram for now
-custom volt support(thanks for forfivo)
-returned voltage to arco's reference
[SIZE="2"]--V1.6--[/SIZE]
-little tweak for entropy problem
-more optimization you can see in my git
-bigmem config will not be built due to busy days
[SIZE="2"]--V1.7--[/SIZE]
-more optimization
-removed rarely used governor and IO scheduler
-GPU glitch fix-castagnaIT
-allow low signal WiFi to be seen - castagnaIT
-tuned vm pressure
-network tweak
-updated to BFS v0.413 by Keff
-retuned lulzactive
-added screen-off LMK by voku
-using the latest Linaro 4.7-2013.1
[SIZE="5"]----------------2.6.35 KERNEL ENDED HERE----------------------------------[/SIZE]
[SIZE="2"]--Aphrodite--[/SIZE]
- started from arco's stock 3.0 kernel
- OC
- VDD syslevel interface
- lulzactive and smartassv2 governor
- introduce ROW IO and SIO for IO governor
- compiled with latest linaro
- fully O3 optimized
- CFS autogroup
[SIZE="2"]--Baphomet --[/SIZE]
- using arco's latest kernel 3.0 source
- SLUB memory allocator optimized
- dynamic read ahead
- 3.4 interactive governor
- ROW v4
- more optimizations
[SIZE="2"]--Chronos--[/SIZE]
- reworked from clean original arco's source
- Battery Life eXtender - BLX (christopher83)
- reverted back to O2 for now
- fast charge (ivendor)
- add PowerSave governor
- 375MB available RAM
- 1.8 GHz OC
----download-----
--V1--
18-12-12-stock voltage here
18-12-12-UV here
maxmem version here
--V1.1
stock voltage here
UV version here
maxmem version here
--V1.2
stock voltage here
UV version here
maxmem version here
bigmem version here
--V1.3
bigmem version here
my own version http://db.tt/fIlmZjxK
JB-hadiconfig version here GIVE THANKS TO 7amada100 HE DID THE CM10 VERSION
--V1.4
bigmem version here
hadiconfig version here
--V1.5
bigmem version here
hadiconfig version here
--V1.6
hadiconfig here
--V1.7
hadiconfig here
--Aphrodite--
hadi config here
--Baphomet--
hadi config here
--Chronos--
hadi config here
some useful script and code
if it started with #!/system/bin/sh it means a script consisting the line here
Code:
disable JPEG Compression
[CODE]
#!/system/bin/sh
echo 1 > /sys/kernel/jpeg_compression/zero_jpeg_compression
[/CODE]
BUG REPORTING RULE
Make sure before reporting bug or issue with this kernel, you give enough information about what you have such as
basic information of what ROM you used
kernel version
specific problem
i will ignore issue that doesn't fulfilled those 3 basic term. ex : bad with gaming, deepsleep not working, etc
POSTING RULE
you are free to show what you feel after using this kernel but there are some rules for posting here
NO COMPARE! i'm not making kernel to compete with other's kernel
NEVER SAYS "MY xxx IS BETTER THAN YOURS"
RESPECT OTHER MEMBER
----CREDIT----
Arco68 - i'm using his source thanks for the bigwork on kernel 3.0
@Keff - helping a lot with ideas and fixes
camcory - he's the one helping me to make bootimg thanks
CastagnaIT - took many things from his git also for the ramdisk. i love his bootsplash thanks alot
forfivo - get idea about maxmem from him
ivendor
Christopher83
linaro toolchain maker - for the toolchain
idea of EFS backup from gokhanmoral and arco68
enabling KSM idea taken from dorimanx git
7amada100 - making the CM10's version
ipromeh for the bootsplash
you - for looking on my thread
beta testers, thanks for the feedback
i'm not a developer so forgive me if my kernel doesn't satisfy you. i made this kernel for my personal use but now i'm thinking of sharing these kernel on here
eventhough i'm not developer, but please feel free to report any bugs. i will try my best to fix the bug
if this kernel is good enough i will make JB version too
any feedback, bug report, suggestion to improve this kernel is really appreciated
YOU ARE FREE TO USE OR SHARE THIS KERNEL. BUT I ONLY ASK YOU TO GIVE PROPER CREDIT OR LINK BACK TO THIS THREAD IF YOU ARE GOING TO USE OR SHARE THIS KERNEL
SUPPORT MY WORK BY HITTING THANKS OR GIVING FEEDBACK
Great job brow...
Nice job dude
Looks great! Thank you!
Nice development!! BUT... 18-18-12
Sent from my GT-I8150 using xda app-developers app
reidzeibel said:
Nice development!! BUT... 18-18-12
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
ah my bad. thanks for reminding
Sent from my GT-I8150
reidzeibel said:
Nice development!! BUT... 18-18-12
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
Yeah
Sent from my GT-I8150 using xda premium
reuploaded UV version, the last UV version have wrong voltage table
sorry for the inconvenience
wooaaa.. another custom kernel..
i'll try later.. gud job..
Nice try, i will try it later
Sent from my GT-I8150 using xda premium
---------- Post added at 11:51 AM ---------- Previous post was at 11:39 AM ----------
Using maxmem now, it is AWESOME! Performance increased very much, thanks
Sent from my GT-I8150 using xda premium
ipromeh said:
Nice try, i will try it later
Sent from my GT-I8150 using xda premium
---------- Post added at 11:51 AM ---------- Previous post was at 11:39 AM ----------
Using maxmem now, it is AWESOME! Performance increased very much, thanks
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
glad to hear that. what governor did you use?
Sent from my GT-I8150
Finally you release it
-sent from my awesome phone-
*deleted*
O3 causes instability, sticking to O2 atm
Camera doesn't work on bigmem...
I hope in next update, camera fix on bigmem..
God job, bro...:thumbup:
Sent from my GT-I8150 using xda app-developers app
ofcourse camera doesn't work on maxmem, its sacrificing memory deserve to camera and vidrecord to extend more ram (423 mb)
riztdroid said:
I hope in next update, camera fix on bigmem..
God job, bro...:thumbup:
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
MiguelPT said:
Camera doesn't work on bigmem...
Click to expand...
Click to collapse
camera is absolutely broken when you choose maxmem kernel. unless, you can give me some reference about having bigmem without sacrificing the camera support
I'm using lulzactive with maxmem
Its no lag at all and this kernel is very good for gaming too~
Thank you very much
Sent from my GT-I8150 using xda premium
ipromeh said:
I'm using lulzactive with maxmem
Its no lag at all and this kernel is very good for gaming too~
Thank you very much
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
nice
hmm 2 questions, do you wipe dalvik and cache at the time you flash this kernel? i need a report about lulzactive battery life and performane, is it good enough?
epic Bigmem, 423 MB..
Anyone tested camera with lgcamera? In forvivo's 392 MB it works but only 480p.. How about this one?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SaberKernel This Kernel Is Compatible with all TW/Samsung based JB ROMS for this device--- (Not AOSP)
READ, READ, READ before downloading, flashing, or posting questions
Not all phones are created equal meaning some phones will not handle Overclocking / Underclocking or Undervolting as well as others.
Features
Kernel Version 3.0.96
UC to 100
OC to 1960
UV Support
Added Support For 3rd Party OC apps---
Advanced Power Emulation
Default Scheduler= Zen
Default Governor= Pegasusq
Default boot set to 1600
Built using arm 4.4.3 toolchain
Ramdisk Mods to support Custom Boot Animations
Boeffla Sound Support
Touchwake
GPU Control
Github
In my GITHUB you can find my sources and code changes
Credits
Samsung for Official Source Code
Andreilux
Faux123
Cmenard
Simone 201
Gregkh
Sarcastillo
supercurio
Der Teufel
Ezeekel
ZaneZam
Yank
Instructions
TWRP Recovery HIGHLY Recommended!
-Download Kernel
-Nandroid
-Flash Kernel
-Boot system and DO NOT TOUCH FOR 2-3 MIN
Changelog
Code:
10|03
Upgrade to Linux 3.0.97
Revert of GPU edits to fix glitches in Graphics/reboots
Raise Voltages on 1960 for stability
Update zram_drv.c … thanks to insanemal
9|26
Raised Max Clock Speed --1960
Edits to GPU Clocks and scaling for Max performance (while preserving battery at stock values)
New compression
ADB Remount Enabled
9|18
Complete Rebuild from Updated Source
Zen default sched
Upgraded to 3.0.96
Fixed GPU freq scaling
More voodoo code removal
9|11
Upgrade to Linux Version 3.0.95
Edits to GPU Voltage Allocation
Boeffla Sound Replaces Voodoo (by request)
Boeffla and Trickster apps now added with flash
Clean Up of Version
Remove Dirty in Version Description
USB Charging Rate Increased to match A/C rate
ZZmoove Updated to 7d
Fixed Memory/cache leak that was causing instability and poor battery
8|28
I have been slacking on releasing kernels outside of my ROMs so this changelog is kind of a mess.
If you cannot follow the log please see my git for itemized changes
--Upraded to Linux 3.0.93
-- Added in exfat module source thanks to Faux123 and SORC
-- ZZMOOVE updated to v0.7 (ZaneZam/Yank)
-- LulzactiveQ added in (Gohkanmoral)
-- Upgraded to Linux 3.0.91
-- Wifi driver edit for reduce wakelock
-- All sources Merged!!
-- Upgraded to Linux 3.0.87
-- Added ZZMOOVE
---- zzmoove edited to support more frequencies
-- Edits to WIFI handling for less wakelock issues/performance
-- Some Peg gov Edits
-- Edit to I/O que
-- Edits to kernel/module.c in hopes of further work on exfat later on
7|2 --
Upgraded to Linux Version 3.0.84
New Under Clock Frequency --STABALIZED
- 100 mhz UC all set
Triangle away support
---All testers have reported back as things being stable and most
have run it through intensive and reg use and no SOD at 100mhz low.
I believe the times of certain devices not liking the low step is over. Have Fun
6|24 --
Upgraded to Linux Version 3.0.83
2 Versions
--- One with UC for those who's chips dont mind
---One Stock Low end
New Under Clock Frequencies
- 120 mhz UC VERSION ONLY
Edits to Peg GOV in Both Versions
6|19 --
Upgraded to Linux Version 3.0.82
New Under Clock Frequencies
- 160 mhz
- 140 mhz
6|13 --
Complete Clean Rebuild from updated sources
Linux 3.0.81
ZRAM
Freq Voltage Edits
Compression Edits
Freq "Bleeding" fixed
Intelliplug/Ecomode
More Mali Edits
Dynamic Filesync
5|05 --
Upgraded to Linux Version 3.0.76
GPU Handling is Back And Fixed
Touchscreeen Mods
TouchBoost Control Added
SetLocalversion Modification ( Just Shows differently in about)
More...
4|26 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release
Downloads
SaberKernel_45.3 http://d-h.st/Vrb
Support this Development By clicking this Button,,, Thank you
http://forum.xda-developers.com/donatetome.php?u=4488450
Guide to Thread Participation":
Generally speaking, we are a pretty calm group of people, but as with so many other things in life, there are those that evoke a negative response from the very start. THAT is why we are such believers in maintaining a polite, respectful thread. Most everyone here is eager to help, and the only thing we ask is (despite the associated tedium) read the entire thread, it can only help. If and when you are still stuck, feel free to ask questions, we're all here to help one another.
--TMobTim
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
XDA:DevDB Information
|KERNEL| SaberKernel_45.3 || 3.0.97 || UC-100mhz || OC-1960mhz || exFAT | 10|03, a Kernel for the Sprint Samsung Galaxy Note II
Contributors
ptmr3
Kernel Special Features:
Version Information
Status: Stable
Created 2013-09-12
Last Updated 2013-10-03
Mine
This looks awesome! Can't wait to try it!
Sent from my SPH-L900 using xda premium
Going to give it a whirl..
Thank you!!
Sent from my SPH-L900 using xda premium
On behalf of the community thanks! (SURE WISH IT WAS AOSP THO) this would of been a match made in heaven for “CARBON ROM".
I'll be back with my results lol
Sent from my SPH-L900 using xda premium
Herk718 said:
On behalf of the community thanks! (SURE WISH IT WAS AOSP THO) this would of been a match made in heaven for “CARBON ROM".
Click to expand...
Click to collapse
Looks like my SOAP kernel needs building for L900 as well huh
Sent from my SGH-T889 using xda app-developers app
Apparently it doesn't support SD cards? Lol jk Idk if it's just me but my **** don't work right not being bother with it
Sent from my SPH-L900 using xda premium
moeinyoho said:
Apparently it doesn't support SD cards? Lol jk Idk if it's just me but my **** don't work right not being bother with it
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
If it is a 64gb ex fat, format to fat32
Sent from my SGH-T889 using xda app-developers app
I believe I have it at fat32 I'll try it again later
Sent from my SPH-L900 using xda premium
moeinyoho said:
I believe I have it at fat32 I'll try it again later
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
The kernel more than supports SD. Just Not exfat
Sent from my SGH-T889 using xda app-developers app
Question?
i am on pure stock
i returned to stock to do update for mc2 and rooted with cf root
I don't want to use custom roms can i still flash this kernel or do i need a specific rom
also if i need a specific rom which one will you suggest?
I would like to stay as close as possible to stock
if stock rom work, can i use any app to overclock device also is it posible to overclock the gpu with this kernel?
ptmr3 said:
Looks like my SOAP kernel needs building for L900 as well huh
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
That would be fantastic and BTW I'm always up for testing just pm me. Thanks in advance for your contributions to the community. (Donation coming your way soon)
Thanks again!
Can I flash on ma7 rom? Im running swampmonter 2.01 but its ma7 based
Sent from my SPH-L900 using Xparent Green Tapatalk 2
chamucoliz said:
i am on pure stock
i returned to stock to do update for mc2 and rooted with cf root
I don't want to use custom roms can i still flash this kernel or do i need a specific rom
also if i need a specific rom which one will you suggest?
I would like to stay as close as possible to stock
if stock rom work, can i use any app to overclock device also is it posible to overclock the gpu with this kernel?
Click to expand...
Click to collapse
Yes you can flash this kernel on stock rooted and can use any app. I recommend trickster mod or antutu CPU master. No the GPU is not scalable at this time
Sent from my SGH-T889 using xda app-developers app
raw2000j said:
Can I flash on ma7 rom? Im running swampmonter 2.01 but its ma7 based
Sent from my SPH-L900 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Yes the ROM firmware version does not matter
Sent from my SGH-T889 using xda app-developers app
I tried it and it woeks but I have the swapping sd card mod but doesnt work on this kernel but works in perseus kernel anyway you can modify kernel to make it work like the perseus one?
Sent from my SPH-L900 using Xparent Green Tapatalk 2
Thanks for porting your saber kernel over here. :thumbup:
Sent from my SPH-L900
raw2000j said:
I tried it and it woeks but I have the swapping sd card mod but doesnt work on this kernel but works in perseus kernel anyway you can modify kernel to make it work like the perseus one?
Sent from my SPH-L900 using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
There are scripts that do work. A good number of people from the other notes have it going. I however do not use this mod so really don't put much emphasis on it
Sent from my SGH-T889 using xda app-developers app