I have purchased a wireless qi charging pad from ebay for my s3 i9305 and it fits nice and snug under the back cover. I also have a maxell air volt charging pad which works well with it when it is on the pad, however it will not charge when I place it in my Griffin survivor case which is what I have it in on a daily basis to protect it. Anyone got any ideas how to get it to work. Does anyone know will wireless charging work with an otterbox defender as maybe could switch cases.
Thanks
zeroasylum
check the sticky on this sub forum. i know for a fact that the defender and the ballistic cases work for sure. I personally tested this out at thw at&t store w/ my kit.
the general rule is 4mm thickness max. there is a new spec for the transmitter that said it can do up to 4cm so maybe the maxell is the older one that is shorter ranged
Sent from my GT-I9300 using xda app-developers app
mputtr said:
check the sticky on this sub forum. i know for a fact that the defender and the ballistic cases work for sure. I personally tested this out at thw at&t store w/ my kit.
the general rule is 4mm thickness max. there is a new spec for the transmitter that said it can do up to 4cm so maybe the maxell is the older one that is shorter ranged
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I have looked through the thread but cant seem to find a pad that is compliant with the new revision for 40mm use do you know if the bitmore one is. I am in the UK so not many of them here. You were right with regard to the Maxell pad and the distance of 4mm as it is spec 1.0 so have requested a return for it.
Thanks
Zeroasylum
Sorry, I was never able to get more info on that before the thread got closed. (someone abused the thread and tried to sell stuff, thus screwing everyone out of a proper thread).
You'll have to look up online to see if there's any new transmitter w/ a new revision. although i would think they would be using the newer revision in the newer stuff.
Related
Topic
Sent from my ADR6400L using XDA App
Yes, it does fit. That being said it is a very tight fit, one poster here removed the foam from the back of the Otterbox case, I did not and the case still fit.
I have also purchased the PT defender case from Bestbuy and it fits as well, again a very tight fit.
I was really worried about it charging through the cases, but it does without any issues.
Awesome! Thanks for your response!
Sent from my ADR6400L using XDA App
There any other good cases that will fit with the wireless charging door?
I have the case/holster combo from Verizon and the wireless charger and battery cover. The case I have does not work with the wireless charger back. It sucks I have to change the back cover everytime I want to charge the phone.
stearic said:
There any other good cases that will fit with the wireless charging door?
Click to expand...
Click to collapse
Doubt it. Wouldn't a case on that door affect how well it works?
Sent from my ADR6400L using Tapatalk
Flipdog said:
Yes, it does fit. That being said it is a very tight fit, one poster here removed the foam from the back of the Otterbox case, I did not and the case still fit.
I have also purchased the PT defender case from Bestbuy and it fits as well, again a very tight fit.
I was really worried about it charging through the cases, but it does without any issues.
Click to expand...
Click to collapse
The wireless charging door seems like a extended battery size? Is their a different case that bestbuy sells besides the PT Platinum? I can't find the defender you are referring too
oc3rulz said:
The wireless charging door seems like a extended battery size? Is their a different case that bestbuy sells besides the PT Platinum? I can't find the defender you are referring too
Click to expand...
Click to collapse
The charging door is bigger than the stock door, but is still smaller than the extended battery door.
Here is the SKU 2299396 for the platinum Best Buy case.
I had to do my first battery pull since using the BB case and I don't recommend using this case with the wireless battery door. Like I said it was a tight fit putting the case on, out was almost impossible taking the case off!.
The Otterbox Defender is a tight fit, but can be removed fairly easily.
The Best Buy Platinum case is much to difficult to remove to recommend it for use with the wireless charging door.
So the Otterbox's plastic and rubber doesn't affect the wireless charging at all? Any idea what the range on the wireless charger is? Also, what wireless charging system are you using?
nl3142 said:
So the Otterbox's plastic and rubber doesn't affect the wireless charging at all? Any idea what the range on the wireless charger is? Also, what wireless charging system are you using?
Click to expand...
Click to collapse
When using the Otterbox case I had no issues when charging. I didn't remove the foam, but like I said previously it was a very tight fit.
I have no idea on range of the charger, and i'm using the LG Verizon pad.
my black silicon verizon case fit fine over the wireless charging door, it created some gaps and such around the kickstand, but it worked and charged fine
Flipdog said:
When using the Otterbox case I had no issues when charging. I didn't remove the foam, but like I said previously it was a very tight fit.
I have no idea on range of the charger, and i'm using the LG Verizon pad.
Click to expand...
Click to collapse
So are the wireless battery doors and mats interchangeable or do you have to be sure you use the correct brand mat for your door? Just wondering because if the doors/backs are mat specific then I probably won't do it as you won't be able to use the LG Verizon pad with anything other than a phone.
nl3142 said:
So are the wireless battery doors and mats interchangeable or do you have to be sure you use the correct brand mat for your door? Just wondering because if the doors/backs are mat specific then I probably won't do it as you won't be able to use the LG Verizon pad with anything other than a phone.
Click to expand...
Click to collapse
Don't think it's specific to the LG Verizon charger, I just purchased it as I got the wireless battery door free (Aug. Verizon promotion)
Pretty sure that I read here (XDA Forums) that the powermat would work as well, I would search the forums before going and buying the powermat charger.
Flipdog said:
Don't think it's specific to the LG Verizon charger, I just purchased it as I got the wireless battery door free (Aug. Verizon promotion)
Pretty sure that I read here (XDA Forums) that the powermat would work as well, I would search the forums before going and buying the powermat charger.
Click to expand...
Click to collapse
Powermat won't work as it uses a different charging technology. You can use the energizer QI charging matt though, that will work.
I got 2 of these off eBay: http://www.ebay.com/itm/NEW-SAMSUNG...159056?pt=PDA_Accessories&hash=item3f0f089010
They are meant for the "standard" (AT&T or International) GS2's but it fits my new T-989 perfectly even with the DIZTRONIC TPU case on it. It probably fits most any device with a bottom micro-usb port on it. It comes with a removable rubber adapter for smaller devices. Not bad for $11 from China. Got it in about 10 days. It's a knockoff of the iPhone Universal base. No audio out ports. Just sync/charge.
i purchased the Original from Samsung only $40, and it comes with extra 1850 mAh original battery with NFC
AllGamer said:
i purchased the Original from Samsung only $40, and it comes with extra 1850 mAh original battery with NFC
Click to expand...
Click to collapse
Any pictures? How long did it take for you to receive it?
Sent from my SGH-T989 using xda premium
Ok, but that is $29 more than $11 and most people don't need a $29 battery and NFC is useless for the most part. Plus it doesn't work with a case. Other than that, GOOD DEAL!!
Sent from my SGH-T989 using xda premium
OuncE718 said:
Any pictures? How long did it take for you to receive it?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Picture is in the OP as was the approx delivery time.
Sent from my SGH-T989 using xda premium
MisterEdF said:
I got 2 of these off eBay: http://www.ebay.com/itm/NEW-SAMSUNG...159056?pt=PDA_Accessories&hash=item3f0f089010
They are meant for the "standard" (AT&T or International) GS2's but it fits my new T-989 perfectly even with the DIZTRONIC TPU case on it. It probably fits most any device with a bottom micro-usb port on it. It comes with a removable rubber adapter for smaller devices. Not bad for $11 from China. Got it in about 10 days. It's a knockoff of the iPhone Universal base. No audio out ports. Just sync/charge.
Click to expand...
Click to collapse
Nice going order me a couple of them. Thanks
Does anyone know if this cradle or any other one will work with the D3O Flex Case?
x6369x said:
Does anyone know if this cradle or any other one will work with the D3O Flex Case?
Click to expand...
Click to collapse
from the pictures it seems way too tight to fit in with a case
however the original one from Samsung will work just fine with cases, pictures here
http://forum.xda-developers.com/showthread.php?t=1349656
Thanks. Looks good.
MisterEdF said:
I got 2 of these off eBay: http://www.ebay.com/itm/NEW-SAMSUNG...159056?pt=PDA_Accessories&hash=item3f0f089010
They are meant for the "standard" (AT&T or International) GS2's but it fits my new T-989 perfectly even with the DIZTRONIC TPU case on it. It probably fits most any device with a bottom micro-usb port on it. It comes with a removable rubber adapter for smaller devices. Not bad for $11 from China. Got it in about 10 days. It's a knockoff of the iPhone Universal base. No audio out ports. Just sync/charge.
Click to expand...
Click to collapse
Can you post pics of your T-989 w/ TPU case in the dock?
Do you know if the USB transmits audio and if it has a back 3.55mm jack?
I ordered two of the Sinjimoru Sync stands. They're cool looking and lightweight. I removed the two lock tabs on the cable that make the cable stick in tighter. I'm planning on mounting them to something that won't lift up easily when I try to remove the phone. Overall, worth the $22.
Sinjimoru Sync & Charge Dock
Looks awesome but does it tip over easily? looks unstable
AllGamer said:
from the pictures it seems way too tight to fit in with a case
however the original one from Samsung will work just fine with cases, pictures here
http://forum.xda-developers.com/showthread.php?t=1349656
Click to expand...
Click to collapse
The stand you are linking to doesn't charge or sync. That stand is just a holder with no connection directly to the phone. 2 totally different things with totally different purposes.
x6369x said:
Does anyone know if this cradle or any other one will work with the D3O Flex Case?
Click to expand...
Click to collapse
It fits my T989 with the Diztronics case no problem and will fit any similar "thinness" case. Snug, but no problem. I looked at the D30 case the other day and put them up against each other and while the left to right size are identical the front to back on the D30 is a bit more and my guess is it wouldn't fit. I was surprised when my Diztronic case fit but it did NOT need to be forced, just a slight push. For $11 you really can't go too wrong.
talltexan said:
Do you know if the USB transmits audio and if it has a back 3.55mm jack?
Click to expand...
Click to collapse
No audio capability, just charge and sync.
thanks I ordered one
They are still tight on the base, and would tip over if you pushed them. They're fairly stable, but it is kind of a pain to use one hand to hold the base grab the phone.
I did fix that today. I went out into the alley behind the loft and grabbed a brick. A few minutes after meeting the dremel and a little bit of epoxy, they're stable.
http://farm7.staticflickr.com/6233/6366960059_565143ef63_b.jpg
That's what the stands look like mounted to the brick, and in the Body Glove Diamond cases. I did play a little with some LEDs and lighting the bases up, since they're clear/black acrylic and the light travels through them. I'm going to hold off on that for now, but maybe soon.
to choking am a bit confuse on ur pic is that just a stand whit out the option of charging or a stand whit charger?
There is a cable that comes up behind the stand, and snaps into the stand. It charges, and I bet you could use the stand for other phones, but I can't guarantee that. I know it works fine with the T989.
Well thx for ur response ill see if i get my hands on one this on up coming week
Sent from my SGH-T989 using xda premium
Ok so I bought a Qi wireless charging kit that included among other things a new back to accomodate the wireless charging of my phone. The only problem is that now my deender case does not fit my phone anymore. Anyone know where a person can get a case to fit the phone with the slightly larger back and preferably a case with a belt clip.
Thanks,
Alt
Sorry i cant help you with that, but mind me asking where you bought that kit? a link would be appreciated:good:
that's weird. I tried the defender case w/ my kit and it works just fine. fits without a problem and the pad still connects with the transmitter. did you somehow buy a shoddy bootlegged case?
Sent from my GT-I9300 using xda app-developers app
Can wireless charging be used with a protective case?
What is the best wireless charging kit, I tried googling and there is a lot of different options, some are thick backplates some are thin pad that you seem to put between battery and back cover.
What are the best options? i'm sure someone here will know
Thank you
btw I have Ringke SLIM lite case, can that case work with wireless charing?
sticked thread. post #2.
i personally have the ballistic sg case.
others have reported that even the defender works.
Sent from my GT-I9300 using xda app-developers app
I have the pad that slips under the stock cover and works fine. You can have a case on it up to the thickness of 2 CDs.
Be aware that some charging pads do better than others when it comes to the distance from the pad. I had an off brand one and it constantly lost connection with my Ballistic Maxx case(two layer case). The Lg charging pad I have has no problems with the case. It does lose connection with a 3 cd thickness.
I used cd's to simulate the thickness of the case before buying one.
rtan73 said:
I have the pad that slips under the stock cover and works fine. You can have a case on it up to the thickness of 2 CDs.
Be aware that some charging pads do better than others when it comes to the distance from the pad. I had an off brand one and it constantly lost connection with my Ballistic Maxx case(two layer case). The Lg charging pad I have has no problems with the case. It does lose connection with a 3 cd thickness.
I used cd's to simulate the thickness of the case before buying one.
Click to expand...
Click to collapse
could you provide a link to both the pad and charging station? just wanted to see which ones you recommend.
I don't have the link to the receiver that I have. It came with the generic pad that I have(and plan to return for other reasons). I purchased it from Ebay(from china) on a friends computer so I don't have the info.
Here is the link to the LG pad I have. http://www.amazon.com/LG-Electronic...id=1368740737&sr=8-2&keywords=lg+charging+pad
The reason I got this pad was add it to a universal phone vent mount, so that I could charge the phone while docked in the car. I needed a small charging pad that would fit in the mount. It's much smaller than the phone so I don't know if I would recommend it for the home. Lg also has another model which is more like the standard type.
mputtr said:
sticked thread. post #2.
i personally have the ballistic sg case.
others have reported that even the defender works.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
i have a defender case with panasonic pad it works but its wonky doesnt work at all with the silicone skin on have to take that off but even the plastic it has a little trouble currently looking for a new case that will work with it
Dark_N1ghtmar3 said:
i have a defender case with panasonic pad it works but its wonky doesnt work at all with the silicone skin on have to take that off but even the plastic it has a little trouble currently looking for a new case that will work with it
Click to expand...
Click to collapse
yeah, anytime you put some sort of obstruction in between the pad and transmitter it makes it harder for the charge to go through.
you just have to find a sweet spot. i made a dock that lines the pad (receiver) w/ the transmitter perfectly so it charges almost every single time on first placement. sometimes it requires a 2nd attemp before the charging beep goes off.
Sent from my GT-I9300 using xda app-developers app
I've got this QI charger. http://goo.gl/AxJ8d and a pretty basic case that has a stand at the back. Here's a very short video I made of it working
http://goo.gl/xwGb1
It works 98% of the time on first attempt. Though if I place the phone down too softly it won't connect.
Sent from my GT-I9305 using xda app-developers app
I went to Seidio's site today to see what their progress on cases for the Nexus 5 look like and found that they have their holder page up with all of the usual cases there. Everything is showing as "Under Development" but the prices are up at least.
http://www.seidioonline.com/LG-Google-Nexus-5-s/9164.htm
You can go to another phone's section and get an idea of what the cases look like. I am personally looking for a ruggedized case with a holster and a kickstand, so far it looks like the absence of Otterbox (just like the Nexus 4) means that Seidio might be the only option.
no battery case
hmm i wonder if that damn metal kickstand (which uses magnets) will interfere with wireless charging
indianajonze said:
hmm i wonder if that damn metal kickstand (which uses magnets) will interfere with wireless charging
Click to expand...
Click to collapse
Doubtful, the official charger that is due to hit the play store sometime utilizes magnets to hold the N5 in place with the metal discs in the N5. Magnets can impact the compass and such, but not wireless charging.
Sent from my Nexus 5 using Tapatalk
A battery case would be sick and I'll wouldn't mind paying a premium price for it
Sent from my Nexus 5 using XDA Premium 4 mobile app
duckied said:
A battery case would be sick and I'll wouldn't mind paying a premium price for it
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
A battery or an Obex case are the only things I would consider frrom Seidio.
Gah! Where's the Convert?
well after doing a bit of research it seems that the N5 cases under development are very similar to their Nexus 4 cases, and their N4 cases work perfectly with wireless charging. so all there is to do now is wait patiently...
well i guess there's no chance of a november release at this point...
You can still click the links even though there is no product picture up and they state whether the phone can use NFC and or wireless charging on each product. Also the convert is there, a couple of them. I have an email in asking when they might release but no answer yet.
I'm not sure if alot of you know this - but this company has a partnership with bestBuy where they sell the exact same cases under the "platinum series" brand. The fine print on the packaging even says seidio on it and they are roughly HALF the price.
So be on the lookout for these new cases at BestBuy for less cash :laugh:
one troubling thing i noticed is that on their site they still list LG G2 cases as "under development". The G2 was released ~50 days BEFORE the Nexus 5. if THAT's still under development, i'd say the odds of us seeing the N5 cases before 2014 are not great. seems like seidio really screwed up with the timing of this release...
They now have the cases on the website, sent them an enquiry about them working with the wireless chargers and they said that they don't
I wonder if its because of the metal kickstand.
slowpok22 said:
They now have the cases on the website, sent them an enquiry about them working with the wireless chargers and they said that they don't
I wonder if its because of the metal kickstand.
Click to expand...
Click to collapse
i dont believe thats accurate. looks like the same case as the nexus 4 one, and that one most definitely did work with wireless charging
http://www.seidioonline.com/lg-nexus-4-surface-metal-kickstand-case-black-p/csr3lgn4k-bk.htm
The SURFACE™ with Metal Kickstand is tested to be compatible with official Google Nexus 4 Wireless Charger. This product does not interfere with NFC.
indianajonze said:
i dont believe thats accurate. looks like the same case as the nexus 4 one, and that one most definitely did work with wireless charging
http://www.seidioonline.com/lg-nexus-4-surface-metal-kickstand-case-black-p/csr3lgn4k-bk.htm
The SURFACE™ with Metal Kickstand is tested to be compatible with official Google Nexus 4 Wireless Charger. This product does not interfere with NFC.
Click to expand...
Click to collapse
keeping my fingers crossed, I have the i Blason but unfortunately the fit and finish just isn't very good.
Seidio is really pushing for the kickstand.
Dilex and Surface NOW SHIPPING!
I just went to the Seidio web site and the Nexus 5 Surface and Dilex cases/holsters are listed as NOW SHIPPING. I absolutely LOVE Seidio's Convert case for my Galaxy Nexus - it was a big step up from the Otterbox Defender. I'm certainly going to try either the Dilex or Convert (when it's available), but I'm not liking the idea of a kick stand adding to the bulk of the case.
just got my surface combo. the kickstand adds zero bulk. the case is super thin and super light. makes the i-blason i was using kind of brick-like. and wireless charging works just fine, as i suspected
indianajonze said:
just got my surface combo. the kickstand adds zero bulk. the case is super thin and super light. makes the i-blason i was using kind of brick-like. and wireless charging works just fine, as i suspected
Click to expand...
Click to collapse
Could you post some pictures? I was really thinking about getting this case. Thanks.
Sent from my Nexus 5 using Tapatalk
They make my favorite cases but I won't get one till some colors come in. Saying that the kickstand at snowball, they must have changed the design, as every version I've ever had with a kickstand adds about a millimeter