[Q]Sprint PRL with 3g Roaming - Sprint Samsung Galaxy S III

Hello, this is my first post on this forum and I THINK I am placing it in the right section. If it is incorrect, I apologize!
I have looked around and I found this thread here that contained some great information. I tried all of the PRLs and I could only get 3G roaming on one of them - the 01337-mod PRL. I was using roam control with the Sprint Corporate Accounts, however I was still only getting 1x. I managed to get 3G when using the 01337-mod PRL, however I do not wish to be on Verizon all the time. I have looked around but none of the PRLs I have tried work for me with roam control. I am running the Monthly Snapshot of CM10.1. Is there a way for me to get 3G roaming with roam control?
Thanks for the assistance!

From what I have gathered it is because Roam Control turns off the 1900 mhz band leaving only the 850 mhz, cellular band. Therefore no 3G. Here is a link to a post that discusses it: http://forum.xda-developers.com/showpost.php?p=32090794&postcount=76
I use Roam Control while at work, but only for voice not data. If you periodically need 3G data, I would suggest the PRL write method to flash a modded VZW PRL for only when needed, then go back to Sprint 56006.
Sent from Notmyepic's Odexed Blue GS3

notmyepic said:
From what I have gathered it is because Roam Control turns off the 1900 mhz band leaving only the 850 mhz, cellular band. Therefore no 3G. Here is a link to a post that discusses it: http://forum.xda-developers.com/showpost.php?p=32090794&postcount=76
I use Roam Control while at work, but only for voice not data. If you periodically need 3G data, I would suggest the PRL write method to flash a modded VZW PRL for only when needed, then go back to Sprint 56006.
Sent from Notmyepic's Odexed Blue GS3
Click to expand...
Click to collapse
Hmm, that is interesting. And quite disappointing! Thank you for the heads up. And what PRL write method are you suggesting? Via dialing ##3282# is not supported on CM10.1. The only method I know how to flash PRLs on CM10.1 and other AOSP ROMs is through DFS, and a computer is required for this and it is inconvenient. I managed to get 3G Roaming for a couple minutes when on PRL 16006 I went to Roam Control, chose "Roam Only" and then rebooted my phone. I had Mobile Data on and WiFi off, and it instantly connected to Verizon's 3G. I got about 50kB/s download. However, when I went back to "Roam Control" and chose "Home Only" I connected to Sprint's 3G. I then tried to reconnect to Verizon by choosing "Roam Only" and I could only manage to get 1x.

LakeSoccer2 said:
Hmm, that is interesting. And quite disappointing! Thank you for the heads up. And what PRL write method are you suggesting? Via dialing ##3282# is not supported on CM10.1. The only method I know how to flash PRLs on CM10.1 and other AOSP ROMs is through DFS, and a computer is required for this and it is inconvenient. I managed to get 3G Roaming for a couple minutes when on PRL 16006 I went to Roam Control, chose "Roam Only" and then rebooted my phone. I had Mobile Data on and WiFi off, and it instantly connected to Verizon's 3G. I got about 50kB/s download. However, when I went back to "Roam Control" and chose "Home Only" I connected to Sprint's 3G. I then tried to reconnect to Verizon by choosing "Roam Only" and I could only manage to get 1x.
Click to expand...
Click to collapse
Since I got my GS3, I have only been on a TW Rom, specifically Odex Blue by Strong Steve, so I don't know anything about CM10 on a GS3. But needing a computer to change the PRL would be a hassle.
After you rebooted, are you sure about the 3G on Verizon? You can verify by going into Roam Control and verify network status.
I ask because, If I am selected to Roam Only and reboot, I go back to Sprint.
Sent from Notmyepic's Odexed Blue GS3

notmyepic said:
Since I got my GS3, I have only been on a TW Rom, specifically Odex Blue by Strong Steve, so I don't know anything about CM10 on a GS3. But needing a computer to change the PRL would be a hassle.
After you rebooted, are you sure about the 3G on Verizon? You can verify by going into Roam Control and verify network status.
I ask because, If I am selected to Roam Only and reboot, I go back to Sprint.
Sent from Notmyepic's Odexed Blue GS3
Click to expand...
Click to collapse
Yes, I am positive it was on Verizon because I did check. "View network status" under Roam Control and it stated my roaming status = true and my network carrier = Verizon wireless great Lakes. I was getting decent speeds but it's unstable and if it switches to 1x, a reboot is required to get back onto 3G
Sent from my SPH-L710

Related

roam control no 3g

I'm using the Samsung Epic and i just bought roam control...when i press roam only it goes into roam signal but there is no 3g or 1x or any data...did i do something wrong? how do i get data to work? Thanks
go to settings from the home screen and make sure you have data roaming turned on... but if I'm not mistaken, you will only ever data roam on 1x (talking from experience, not any known document or anything)
Wizard Knight said:
go to settings from the home screen and make sure you have data roaming turned on... but if I'm not mistaken, you will only ever data roam on 1x (talking from experience, not any known document or anything)
Click to expand...
Click to collapse
Data roaming is on... any other possible solution?
I have used this app before without a hitch. I couldn't get data to work until I picked "roam" for the data roam guard.
Sent from my Flashback 8.0 using xda premium
You may have already done this, but ensure your data network is ACTIVATED (hold down the power button and instead of selecting power off, select data network). If it is already activated, i.e. you get a 3G signal when you get a Sprint signal, then try deactivating it and reactivating it.
Btw, you are not using a 3G toggle widget of any sort are you? The ones that actually work only work about 50% of the time (buggy), so I don't use them anymore.
If all else fails, try rebooting, wait for a Sprint 3G symbol then switch to Roam.
I thought I remember from somewhere that our roaming is onto the verizon network. And that in the sprint/ verizon agreement, that sprint customers who roam on verizon are restricted to 1x.
I think this is part of why with sprints ec05, it won't show 1x, just 3g no matter what.

[Manual PRL Update] better voice, moar! 3g! for rooted and non-rooted devices

Super slow data speeds?
Poor voice coverage?
Try a custom PRL
Custom PRL files
if you live in an area where you only get 1x this mod will work for you
I use 0001.PRL attached at bottom. it works best for me.
Notice: Custom Prl's will force you to roam causing mostly all data to be roaming. if you use more that 2 gigs a month this hack may not be good for you as you may get booted off their network for to much roaming.
I put together a guide on how to manually change your prl on the epic touch. This will work with rooted and non rooted devices.
For windows users only.
First you need your MSL code.
1. go to the market and install terminal emulator
2. Type ‘’getprop ril.MSL’’ this command is case sensitive so make sure it’s typed correctly.
3. Take note of the 6 digit output number.
or
1. Call sprint and tell them you want your MSL number to do a data reset or some BS story like that. They will usually give it to you. If they don’t hang up and call back until you get someone that will.
2. Make sure you write down the number.
Now on to installing the software and drivers.
1. Download, and install the QPST application
2. Download, and install the Samsung drivers
3. Make sure USB debugging unchecked. Menu>settings>applications>development
4. On the dial pad dial ##8778# and select all. Click home
5. Plug in your device and let everything install.
6. Check the ‘’USB tethering’’ ox under menu>settings>wireless and networks>tethering. This should install a few things needed to create a com port.
7. Open up device manager on your computer. Check to see if you have a tab called ‘’Ports (COM & LPT)’’
8. Take note of what your com port number is. Should say ‘’ SAMSUNG mobile modem diagnostics serial port’’ Mine was 9 yours will most likely be different.
Now let’s change your PRL
1. Open up ‘’QPST Configurations’’ on your computer Start>All Programs> QPST> QPST Configuration.
2. Make sure you are on the ‘’ports’ tab and click ‘’add new port’’
3. Look for the port number that you got from device manager
4. If it’s not there uncheck ‘’ Show Serial and USB/QC Diagnostic ports only’’ if it still doesn’t show unplug usb and restart phone and computer.
5. After you add the correct comport click ok.
6. Now highlight the com port and click ‘’Start Clients” on the top of QPST and open Service programming.
7 .in the screen that opens you should see the phone name FFA6550-ZRF6500, the phone number should be wrong but that’s ok. Select it and click ok.
8. Click the ‘’Roam’’ tab and browse for the .PRL file you wish to load to your phone
9. Click write to phone. QPST will now ask you for the ‘’service programming code’’ this is where you type the MSL code
10. Your phone will automatically reboot and you should be on the PRL you flashed.
11. To check menu>settings>about phone> status check the PRL version. it should match the prl number that you flashed.
12. down load Netmonitor from the market this will tell you the carrier you are roaming on, in my case its sprint, and the network type, mine is EvDo rev.A! :-D
13. Don't forget to add a check to ''USB debugging'' in menu>settings>applications>development otherwise some applications like titanium back up wont work.
If this post helped you please hit the Thanks button
huge thanks to
Leviuqse, Techknowfile and oostah for their hard work!
For those people don't know, it force you to roam on Verizon network
OP please include a warning about using this PRL and possible related issues to it.
There was a thread like this for the Evo when it launched, and if I recall correctly, it wasn't even worth it. Barely worked for anybody. Connection was very flaky.
Hopefully this is different though. I'll give it a shot after I root.
justwonder said:
For those people don't know, it force you to roam on Verizon network
Click to expand...
Click to collapse
Yes. Use this PRL very very very carefully. You can, and will, be kicked out of your contract if you use this PRL exclusively and talk a lot and/or consume a light-to-moderate amount of data.
You've been warned.
Sent from my SPH-D710 using XDA App
nunyabiziz said:
OP please include a warning about using this PRL and possible related issues to it.
Click to expand...
Click to collapse
done
Krynj said:
There was a thread like this for the Evo when it launched, and if I recall correctly, it wasn't even worth it. Barely worked for anybody. Connection was very flaky.
Hopefully this is different though. I'll give it a shot after I root.
Click to expand...
Click to collapse
i originally found this on the evo forums. since been using it on the evo, lg optimus s (which has a similar set up) and now the epic touch. ive never had a problem with connection at all.
Sent from my SPH-D710 using XDA App[/QUOTE]
Like how do you go back to the original?
Is this different than roam control?
I'd like to be able to force roam during certain situations... but not 24x7
Pitnefor said:
Like how do you go back to the original?
Is this different than roam control?
I'd like to be able to force roam during certain situations... but not 24x7
Click to expand...
Click to collapse
To get back to normal update your PRL as you normally would. This is different from roam control in that it puts you on Verizon/Alltel towers exclusively and instead of forcing roaming which would be at 1X it is full-speed 3G.
It works very well, especially if you are in a congested or low-signal area. It has helped me out on a number of occasions.
That said, be warned. This isn't something to play around with if you don't understand what is going on.
Roaming costs Sprint money and they will happily give you the boot for costing them too much money. Typically, but not always, they will send you a letter or call you before cancelling your contract. 1000 minutes/300mb is the guideline to go by. Plenty of people have gone far beyond that without a peep from Sprint but I wouldn't risk it...
...unless you want out of your contract.
Thanks. I get it now
---------- Post added at 09:33 AM ---------- Previous post was at 09:22 AM ----------
on "11. To check menu>settings>about phone> status" ... what should I be looking for to confirm that it worked?
Thanks I see the update. It worked for me. my prl matches
You don't need root to get your msl in the first method
Pitnefor said:
Thanks. I get it now
---------- Post added at 09:33 AM ---------- Previous post was at 09:22 AM ----------
on "11. To check menu>settings>about phone> status" ... what should I be looking for to confirm that it worked?
Click to expand...
Click to collapse
the PRl version.
if you flashed 0001.prl that what it should say.
Anyone can confirm if it can roam on pcs band with prl 11115. Since the og epic would not do evdo roam on pcs band.
Can someone post some speed test results? I want to see if they have improved. Thanks.
Sent from my Epic device.
I'm curious to see some speedtest results.. This is intriguing, I wouldn't mind swapping the PRL at the beginning of the month until I hit ~200MB of 3G data usage and then 'updating' to the Sprint PRL for the remainder of the month. My 3G speeds here are horrible, I left Sprint last summer and at the time 3G speeds weren't bad at all.. now I'm back a year later and I'm getting 10-15kBps.. unacceptable! When I can get 4G signal the speeds are usually between 150kBps-1,000kBps (very acceptable) but most of the time the signal doesn't penetrate buildings at all.
Sprint kicking someone off of their network because of the excessive roaming would be a slap in the face in my opinion.. if they upgraded their network then we wouldn't have to be putting matters into our own hands!
In areas where there is no Sprint 4G coverage but there is Verizon 4G would doing this make it so you'd pick up Verizon's 4G signal?
ker0zene said:
I'm curious to see some speedtest results.. This is intriguing, I wouldn't mind swapping the PRL at the beginning of the month until I hit ~200MB of 3G data usage and then 'updating' to the Sprint PRL for the remainder of the month. My 3G speeds here are horrible, I left Sprint last summer and at the time 3G speeds weren't bad at all.. now I'm back a year later and I'm getting 10-15kBps.. unacceptable! When I can get 4G signal the speeds are usually between 150kBps-1,000kBps (very acceptable) but most of the time the signal doesn't penetrate buildings at all.
Sprint kicking someone off of their network because of the excessive roaming would be a slap in the face in my opinion.. if they upgraded their network then we wouldn't have to be putting matters into our own hands!
Click to expand...
Click to collapse
i can post screen shots for you later on
wbyrd said:
In areas where there is no Sprint 4G coverage but there is Verizon 4G would doing this make it so you'd pick up Verizon's 4G signal?
Click to expand...
Click to collapse
this hack only works for 3g not 4g LTE
ker0zene said:
I'm curious to see some speedtest results.. This is intriguing, I wouldn't mind swapping the PRL at the beginning of the month until I hit ~200MB of 3G data usage and then 'updating' to the Sprint PRL for the remainder of the month. My 3G speeds here are horrible, I left Sprint last summer and at the time 3G speeds weren't bad at all.. now I'm back a year later and I'm getting 10-15kBps.. unacceptable! When I can get 4G signal the speeds are usually between 150kBps-1,000kBps (very acceptable) but most of the time the signal doesn't penetrate buildings at all.
Sprint kicking someone off of their network because of the excessive roaming would be a slap in the face in my opinion.. if they upgraded their network then we wouldn't have to be putting matters into our own hands!
Click to expand...
Click to collapse
have you tried removing the proxy settings?
Here's what I've experienced:
3G Sprint Proxy Enabled: About 600Kb/s
3G Sprint Proxy Disabled: About 1000-1200Kb/s
3G Verizon (with a verizon phone, droid x): about 500Kb/s
So basically I get better speeds with sprint .. unless i'm in a place that roams
Pitnefor said:
have you tried removing the proxy settings?
Here's what I've experienced:
3G Sprint Proxy Enabled: About 600Kb/s
3G Sprint Proxy Disabled: About 1000-1200Kb/s
3G Verizon (with a verizon phone, droid x): about 500Kb/s
So basically I get better speeds with sprint .. unless i'm in a place that roams
Click to expand...
Click to collapse
I haven't removed the proxy but will be trying this out right now! thanks!
2 screen shot results posted in OP
I found 11115 prl on the epic forums, which is supposed to let you use 3g when roaming on Verizon. I have latest Roam Control and when I use roam only, I still get 1X speeds. Anyone else experiencing this?

[fixed] Data while roaming?

I'm running ACS recovery/kernel + root; and it was also true with Zedo v2.
I cannot get any data while roaming. I have installed and run roam control. I have tried all possible options under Settings/Wireless and Networks/Mobile Data and Roaming.
Anyone else?
Edit:
Problem was fixed - see post#6
http://forum.xda-developers.com/showpost.php?p=17811600&postcount=6
Where do you live?
no seriously
The ET4G, like previous samsung phones cannot roam on the PCS band, so if whoever your roaming on is only throwing voice over the cellular band and data over PCS then you got no data.....
No one seems to care about this bug and I don't get why not.
R1ptide said:
Where do you live?
no seriously
The ET4G, like previous samsung phones cannot roam on the PCS band, so if whoever your roaming on is only throwing voice over the cellular band and data over PCS then you got no data.....
No one seems to care about this bug and I don't get why not.
Click to expand...
Click to collapse
My roaming carrier is US Cellular.
R1ptide said:
Where do you live?
no seriously
The ET4G, like previous samsung phones cannot roam on the PCS band, so if whoever your roaming on is only throwing voice over the cellular band and data over PCS then you got no data.....
No one seems to care about this bug and I don't get why not.
Click to expand...
Click to collapse
I'm going to have to go somewhere and roam now...(I purchased Roam Control a year ago for my Moment, but I don't want to root my ET until there is an unroot method)
I ALWAYS had data while roaming with my Samsung Moment. Granted, sometimes it was slow as molasses, but I always had it!
I'm actually seriously considering turning this phone back in... With Sprint's crappy network, once you get inside a building, often the only signal you can get is a roaming cellular signal... which makes the GSII a hair more than useless.
nabbed said:
I'm running ACS recovery/kernel + root; and it was also true with Zedo v2.
I cannot get any data while roaming. I have installed and run roam control. I have tried all possible options under Settings/Wireless and Networks/Mobile Data and Roaming.
Anyone else?
Click to expand...
Click to collapse
I had this happen. I had to go under Wireless and Network then to Roaming. Uncheck all settings in Roaming guard and Roaming settings. Reboot phone then go back and check everthing under Roaming settings again. I think I had to enable the data block under roaming guard. Anyway - it finally told me I was roaming and asked for permission to connect to data. Also using Roam Control.
mlr_90 said:
I had this happen. I had to go under Wireless and Network then to Roaming. Uncheck all settings in Roaming guard and Roaming settings. Reboot phone then go back and check everthing under Roaming settings again. I think I had to enable the data block under roaming guard. Anyway - it finally told me I was roaming and asked for permission to connect to data. Also using Roam Control.
Click to expand...
Click to collapse
Thanks. That actually fixed the problem. More can roam with data.

[Q] Sprint PRL's

Anyone know how to pull the PRL out of the Galaxy Nexus? I tried the *#*#8778#*#* that worked with the NS4G & QPST, but no dice. It would be nice to be able to use something like the 11115 PRL that allowed 3g roaming on older/other phones. I tend to get stuck in areas that have zero Sprint coverage for work a lot of times.
EDIT: *#*#3424#*#* Will put you in the right menu, I'm still working on figuring out how to get QPST to recognize the device though.
EDIT #2: From what I've been reading, the Galaxy Nexus will not work with QPST because it is not Qualcomm compliant...need to find VIA/Spirent PST to be able to do this? Anyone have any input regarding this?
I found a way to change the PRL. I'm not 100% sure that it actually changed the PRL and not just the number that shows in the menu though. The idea came from this thread: http://forum.xda-developers.com/showthread.php?t=1639839
So using Better Cut I followed the first step he outlined, JUST THE ONE ABOUT THE PRL THOUGH. Phone went through and did its reboot came back up.
At first it showed unknown as the PRL, MIN & My Phone Number. I went into *#*#yourmsl#*#* checked under edit and my info was correct, checked under *#*#3282#*#* and my username was correct in the data profile. Went back into about phone and everything had repopulated correctly.
Now where I am sitting its still showing me as connected to a 1xrtt network, but that very well could be because I'm in the middle of WY at the moment. I should be going into SLC tomorrow and I will try to force it to roam while I am there and see what happens.
Seems the post has been edited and no longer has instructions.
1.Download Better Cut (Google it)
2.Install on your phone however you see fit. I just downloaded the apk to my phone and installed from there.
3.Copy your chosen PRL to the root of your SD card and rename to Test (so instead of 11115.prl, it will show up as Test.prl)
4.Create a shortcut using Better Cut, go "Activity", "PRL Write"
5. Go back to where the shortcut is and click it. The phone will reboot and shortly after the PRL should show up in the "About Phone" section of your settings menu.
My friend just got a sprint nexus and he needs to force roam on it. His palm pre had this tweak working.
I've been using corporate PRL's on every phone I've had with Sprint and up until this phone, it has been very easy to do. From what I've read none of the traditional methods work because this phone does not use a Qualcomm chipset for the radio, it is using a VIA chipset. I will report back tomorrow if this actually changed the PRL or if it just changed the displayed numbers. It's hard to say in WY whether or not 3g service is actually available and from what I can tell I am rather far from the tower I am connected to.
RogerPodacter said:
My friend just got a sprint nexus and he needs to force roam on it. His palm pre had this tweak working.
Click to expand...
Click to collapse
The PRL should auto adjust as soon as you change regions. If its not changing and you're experiencing bad reception....etc...contact Sprint cause chances are you aren't alone.
Sent from my Galaxy Nexus using XDA
Actually none of the phone's I have used with Sprint in the past few years have changed as I moved around the country. The point in all of this is not about bad reception really, just that when roaming certain PRL's you will get 3g roaming as opposed to the regular 1x.
Smokeey said:
The PRL should auto adjust as soon as you change regions. If its not changing and you're experiencing bad reception....etc...contact Sprint cause chances are you aren't alone.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
bbv203 said:
Actually none of the phone's I have used with Sprint in the past few years have changed as I moved around the country. The point in all of this is not about bad reception really, just that when roaming certain PRL's you will get 3g roaming as opposed to the regular 1x.
Click to expand...
Click to collapse
PRL's CAN be region specific. However, some networks (Sprint included) Only have 2 or 3 different PRL's (Virgin mobile's...etc..) So whatever PRL you have now should be fine unless Sprint lights up new CDMA networks or adds more spectrum. If you have an old PRL (dunno what revision it is, I'm on VZW) update it with ##873283#. Any connection issues you're having likely aren't the PRL and are probably more related to carrier issues or the notorious Galaxy Nexus Data Drops that almost every version of the phone has had.
Edit: You could always try the Sprint Partners PRL's...dunno if it will work though.
Sent from my Galaxy Nexus using XDA
Smokeey, I don't doubt that they can be region specific. But again, the only point in me doing this is for times when I am actually roaming due to the places I go for work. Ex: I have been in Wyoming for 5 weeks now, Sprint has Zero coverage here. So again it isn't about connection issues. It's about EVDO vs 1xRtt while roaming. The only time I use Roam Control or similar functions are to test the ability to get 3g while roaming.
Aside from that, I do not think this is the best way to go about changing the PRL manually on this phone, but for now it will do.
So .... with the 11115 PRL I was only getting 1x in WY, should have been 3g. Today I got into Salt Lake where there is Sprint coverage and I was still roaming, with the phone and Roam Control set to Automatic. I restored a backup of the stock ROM, refreshed profile, updated PRL and was back on Sprint 3g. Then went back and forced the manual update of the PRL back to 11115, tried switching to roam only mode and the phone stayed connected to Sprints network. By the time I got back into WY and was roaming again, it did properly switch to a roaming partners system and I still had 3g coverage. So it seems that everytime you write the PRL with Better Cut, you could get a different result. FOR ME this is fine, as long as it works when I am actually roaming.
I'm sure down the road a VIA compatible PST and associated drivers will turn up so that this can be done in a similar fashion to the way it was accomplished with QPST on other phones. But for now I am content.
I've linked to your post in my thread for how to update PRL manually. Your post was first.. so it's only right
and for completeness... here is my thread detailing how to use VIA tools the same way we used to use Qualcomm tools. I've linked back to you in the second post which details PRL writing. It looks like even with VIA chipsets.. we aren't so locked out after all.
http://forum.xda-developers.com/showthread.php?t=1696621
Looks good, I'll give it a shot soon. Hopefully it will work in a VM, stuck with 64 bit on my laptop....
autoprime said:
I've linked to your post in my thread for how to update PRL manually. Your post was first.. so it's only right
and for completeness... here is my thread detailing how to use VIA tools the same way we used to use Qualcomm tools. I've linked back to you in the second post which details PRL writing. It looks like even with VIA chipsets.. we aren't so locked out after all.
http://forum.xda-developers.com/showthread.php?p=26425227
Click to expand...
Click to collapse
link in previous post has been updated. i'll post again here just incase
http://forum.xda-developers.com/showthread.php?t=1696621
and yes, it will work in VM.
PRL write not listed in any cut or better cut
I can't find "PRL write" in either Any Cut under activities or Better Cut(v3.3) under all activities. I have Test.prl in /sdcard/. I'm running a vzw gnex on CM9.1. I've tried changing it's name to TEST.prl. I've tried several different prl files.
Anyone one have any advice.
bbv203 said:
Smokeey, I don't doubt that they can be region specific. But again, the only point in me doing this is for times when I am actually roaming due to the places I go for work. Ex: I have been in Wyoming for 5 weeks now, Sprint has Zero coverage here. So again it isn't about connection issues. It's about EVDO vs 1xRtt while roaming. The only time I use Roam Control or similar functions are to test the ability to get 3g while roaming.
Aside from that, I do not think this is the best way to go about changing the PRL manually on this phone, but for now it will do.
So .... with the 11115 PRL I was only getting 1x in WY, should have been 3g. Today I got into Salt Lake where there is Sprint coverage and I was still roaming, with the phone and Roam Control set to Automatic. I restored a backup of the stock ROM, refreshed profile, updated PRL and was back on Sprint 3g. Then went back and forced the manual update of the PRL back to 11115, tried switching to roam only mode and the phone stayed connected to Sprints network. By the time I got back into WY and was roaming again, it did properly switch to a roaming partners system and I still had 3g coverage. So it seems that everytime you write the PRL with Better Cut, you could get a different result. FOR ME this is fine, as long as it works when I am actually roaming.
I'm sure down the road a VIA compatible PST and associated drivers will turn up so that this can be done in a similar fashion to the way it was accomplished with QPST on other phones. But for now I am content.
Click to expand...
Click to collapse
Roam control works for you?
Do we know of another way to change the MSL?
I prefer mine to be 000000, but with QPST not reading it I'm stuck.
I could try and dig up a CDMA workshop, but most of those are virus ridden, and i'm not sure it would connect to it either...
bbv203 said:
I found a way to change the PRL. I'm not 100% sure that it actually changed the PRL and not just the number that shows in the menu though. The idea came from this thread: http://forum.xda-developers.com/showthread.php?t=1639839
So using Better Cut I followed the first step he outlined, JUST THE ONE ABOUT THE PRL THOUGH. Phone went through and did its reboot came back up.
At first it showed unknown as the PRL, MIN & My Phone Number. I went into *#*#yourmsl#*#* checked under edit and my info was correct, checked under *#*#3282#*#* and my username was correct in the data profile. Went back into about phone and everything had repopulated correctly.
Now where I am sitting its still showing me as connected to a 1xrtt network, but that very well could be because I'm in the middle of WY at the moment. I should be going into SLC tomorrow and I will try to force it to roam while I am there and see what happens.
Click to expand...
Click to collapse
I have used this method, but through apex launcher, Also tried it using Sprint Diagnostics options, guess trying bettercut wont hurt. I have the same issue as far as my info reflecting correctly using *#MSL & *#DATA but I have "Unknown" showing up in the My Phone Number, MIN & PRL fields, but they never repopulate for me. Any hints on what could cause this?
Thanks in advance

Sprint GS3 won't roam. Just shows no signal in roaming areas.

I noticed that I can no longer roam on my Sprint GS3. I used to be able to, back when I was using the rooted stock ROM, but now I just get no signal in places where I should have roaming coverage. I know this because my brother's GS3 will be roaming in an area where I'm showing no coverage.
I tried using the LI3, LG8, LG2, and LG9 radios. Have also tried several different ROMs, including AOKP, FreeGS3, and JellyBomb. I also had manually-loaded PRL of 11115, and then tried updating, which gave me 24006.
I also tried all the different tricks I'm aware of -- toggling airplane mode to see if it will choose a new network. And I've checked to make sure that roaming is allowed and isn't set to "Sprint only."
At this point, I'm thinking of going back to stock to see if that works. I'm not sure what to expect with that, though.
Has anybody experienced anything like this?
As far as I know, you arent able to roam on 3g. If you put the corporate prl on your phone, you can then roam on other carriers.
Oops, I should clarify. I can't roam at ALL... meaning no voice, no 1X data, nothing. It shows the "No signal" icon.
Make sure you have roamimg enabled in mobile network settings
Sent from my SPH-L710 using Tapatalk 2
Yes, I suffered the same thing yesterday. Until roam control is fixed I suggest looking at loading of Verizon prl in this situation. It is easy enough on this phone to do it and then switch to a sprint prl when you get back to your home area.
Also check Network settings, are you on "Automatic" or "Sprint"?
I had to toggle data and voice on and off until it gave me are you sure you want to roam message after that it started working.(In roam settings)

Categories

Resources