Related
Hey guys,
I'm getting a AT&T S3 and being that i'm on Rogers and my data plan includes tethering (which i use ALOT).
Also since both the AT&T and Rogers variants are pretty much similar hardware-wise other than it's software, is it possible to flash the stock Rogers ROM straight to the AT&T S3 or will i have to wait for a ROM that's based on the Rogers one to flash onto the phone?
Sorry if this question has been asked before.
Thanks!
BUMP.
Reason i'm asking is because also it seems as if my LTE isn't working (got LTE SIM, LTE Data Plan, LTE Network Coverage).
Could be the kernel?
Thanks!
Try adding the Rogers LTE APN...
APN - ltemobile.apn
MMSC - http://mms.gprs.rogers.com
MMS proxy - 10.128.1.69
MMS port - 80
APN type - *
All other values are left as default.
Just curious, did that work for you?
i have the same problem here. i cannot get my att s3 to connect to rogers lte.
i checked the apn and i switched to the lte super plan.
0lease help
Hey All,
So, for some reason, I am unable to get LTE when i am flashed on the AOKP jellybean rom for the SGH-1747M (rogers)
I did everything that was stated in Task's Gerrit (Changed the connection for WCDMA to LTE/GSM auto), all that does is work for a while on H+, then disconnects.
I've changed my apn settings to the Rogers LTE settings, which just cuts off communication all together
Ive flashed Rogers Modems, still to no avail.
The thing that bothers me is that other sgh-1747M users claim to have been getting LTE on the AOKP jellybean rom.
My question is WHY AM I HAVING TROUBLE!!!??? I know the Rom was made for an At&T sgh1747, so people may say thats why its not working, but people with Canadian SG3's have been able to get LTE on the same ROM im having trouble getting it on.
If theres anything at all im missing, can someone please clarify exactly what im missing and what I should do to get it working.
I love the AOKP jellybean ROM, i keep going back to it, but the LTE not working just hurts my feelings (since I am paying for an LTE smartphone plan). PLEASE SOMEONE HELP!!!
PS: the first time I ever changed from WCDMA to LTE/GSM autom i got a 4G symbol for about 30 secs.....never seen it again! HELP!
i dont have a gerrit. so im unsure what you are talking about.
you need to add a canadian LTE apn and then do this...
Enter *#*#4636#*#* into the dialer
phone information
set preferred network type
change to LTE/GSM auto
task650 said:
i dont have a gerrit. so im unsure what you are talking about.
you need to add a canadian LTE apn and then do this...
Enter *#*#4636#*#* into the dialer
phone information
set preferred network type
change to LTE/GSM auto
Click to expand...
Click to collapse
sorry not gerrit. you stated the info above in one of your earlier updates, which I did. Didnt seem to work for me though. Are there any suggestions as to how I can possibly fix the problem?
KCtheGREAT said:
sorry not gerrit. you stated the info above in one of your earlier updates, which I did. Didnt seem to work for me though. Are there any suggestions as to how I can possibly fix the problem?
Click to expand...
Click to collapse
I'm not really sure. Being as I don't have a Canadian model its not something I can test. But I'm sure some Canadian users will be posting here to help you out soon.
when i try to change the preferred network it will not let me change it to anything else but to lte/gsm (prl) (i have the AT&T version)
task650 said:
I'm not really sure. Being as I don't have a Canadian model its not something I can test. But I'm sure some Canadian users will be posting here to help you out soon.
Click to expand...
Click to collapse
Yea, I know, thats what Im aiming for. I wouldnt ask you directly since I know its not something you directly deal with, but thanks alot for being the first to reply!
And keep up the great work Task!
dirtbikerr450 said:
when i try to change the preferred network it will not let me change it to anything else but to lte/gsm (prl) (i have the AT&T version)
Click to expand...
Click to collapse
Thats interesting. Maybe its because you are actually using at&t network. It works when I put it on LTE/GSM, but all I get is 3G and H+
Check your IMEI in about phone/status. If its showing 0, there's a thread for that.
If you're getting 4G icon and your mobile network status says LTE and are getting LTE speeds, then its cosmetic issue. I had that problem before.
What I did was I flashed Kyan's ROM 1.3 cause its based off of Rogers firmware. Once I verified I had LTE icon on Kyan ROM, then flashed the stock/rooted ROM after.
Sent from my SGH-I747M using xda app-developers app
cue_32 said:
Check your IMEI in about phone/status. If its showing 0, there's a thread for that.
If you're getting 4G icon and your mobile network status says LTE and are getting LTE speeds, then its cosmetic issue. I had that problem before.
What I did was I flashed Kyan's ROM 1.3 cause its based off of Rogers firmware. Once I verified I had LTE icon on Kyan ROM, then flashed the stock/rooted ROM after.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Interesting. I will try that method and see what happens. Thanks for the info; will post back with results soon
Ok, so after going through the whole process stated above, i WAS able to get a 4G symbol come every now and then. But before the connection actually finalizes and goes through (before it turns blue on the aokp rom), it disconnects and goes back to WCDMA preferred. I added the rogers LTE apn, and using that apn with the LTE/GSM auto selected allowed the 4G to come, but it keeps disconnecting. It even sometimes changes back to other apns on the list by itself
Anyone know if theres a way to lock the preferred network and apn settings?
enter apn settings, then REBOOT phone. After that, enter *#*#4636#*#* into phone dialer and go change to LTE/CMDA/GSM. that worked for me, I just needed to reboot my phone for the apn settings to work
JayDieu said:
enter apn settings, then REBOOT phone. After that, enter *#*#4636#*#* into phone dialer and go change to LTE/CMDA/GSM. that worked for me, I just needed to reboot my phone for the apn settings to work
Click to expand...
Click to collapse
didnt work for me, unfortunately. im just cursed
KCtheGREAT said:
didnt work for me, unfortunately. im just cursed
Click to expand...
Click to collapse
I stumbled upon this thread and the above solution using the dialer code. Worked instantly, no reboot required. I'm running R4INS AOKP Jelly Bean port on a Rogers SGH-I727.
veebomb said:
I stumbled upon this thread and the above solution using the dialer code. Worked instantly, no reboot required. I'm running R4INS AOKP Jelly Bean port on a Rogers SGH-I727.
Click to expand...
Click to collapse
Mine works until I reboot. Then it changes back to WCDMA. I'm on Telus.
LTE on canadian i747M (Rogers)
I had similar issue with LTE after flashing to AOKP rom. The fix provided by AOKP (after every reboot, type in *#*#4636#*#* and flipping the network type from WCDMA to LTE_only, then flip to LTE/GSM auto(PRL) ) works. LTE will show up as 4G. I have the 2012-09-30 AOKP build installed.
Yesterday all of a sudden I could not get LTE anymore. Not sure what happened as the only thing I did was to activate a new account on Google. Anyway the 4G/ flipping did not work anymore. Reflashed the rom several times, still the same issue, my phone will not get LTE/4G.
This morning tried the following and voila it worked, thought I will share this:
Flip the network type to LTE Only, there is no connection, REBOOT the phone.
1. After reboot, flip the network type to LTE Only again, this time, the connection worked - what a surprise/thrill.
2. Flipped the network type to LTE/GSM auto (PRL), connection was ok and 4G came on and stayed on. Did several reboots and repeated 1 and 2 and LTE/4G was ok.
Hope this helps.
I don't recommend you to use task aokp rom! You won't get LTE real speed and Dev won't help you since you are not an at&t user! He couldn't care less about the rest so try liquid jelly bean which is a lot faster and better or milestone 4 and aristodemo! They have better support although they are tw rom but worthy anyways
Rogers I747M
Sent from my SGH-I747 using xda premium
Task compiles that ROM based on AOKP source, but AOKP officially doesn't support att. Although I didn't have problems getting lte on his ROM the fact that you have to set it every time you reboot is why I am using cm10 for now otherwise it's a good ROM!
I'm having the same issues on my rogers branded s3. No matter what I do I can get lte to even appear. My apn auto rolls back to the provided apn and if I delete that I have no data at all. Hopefully this does have an answer because the Rom is amazing
Sent from my SGH-I747M using Tapatalk 2
Alright I think I have it figured out. I added the rogers APN related all others and the only change I made was I removed the info under APN type where it said internet+MMS and left it blank. Saved the APN rebooted and I have lte now. I even rebooted my phone and each time it boots up its showing 4g without having to play with any settings
Sent from my SGH-I747 using Tapatalk 2
What is the stock APN for LTE on the Note 2? I flashed a custom rom but im used the Telus option so I can use Network Selection.
I know I can google it but When I google LTE apn I get the pta apn which is not what came on the phone.
If LTE works with the 'phone" APN then what is the pta apn for?
Only APN I have. Works fine on LTE.
Name: ATT Phone
APN: Phone
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
APN type: default,mms,supl
APN protocol: IPv4
Everything else blank.
Sent from my Note ][
Are you referring to forcing EDGE or HSPA+ only? ATT modems do not allow this. I am very interesting in getting this to work on att?
Can I ask which rom you flashed and which modem? Now that you got the LTE APN how is performance?
MattMJB0188 said:
Are you referring to forcing EDGE or HSPA+ only? ATT modems do not allow this. I am very interesting in getting this to work on att?
Can I ask which rom you flashed and which modem? Now that you got the LTE APN how is performance?
Click to expand...
Click to collapse
No Im not refering forcing to GSM/WCDMA. I was referring as I did not have the LTE phone apn.
And I dont have an issue switching between GSM-Edge/WCDMA-HSPA+ at all on my phone....
And I dont know how LTE is yet, Not in an LTE area just near them in 2 directions.
I flashed my note 2 with CleanRom. I like it. Seems fast enough and I like the features. The thing that bugs me is that my network status icon always shows as either 4g or H+. Never LTE and I wonder if I'm actually on an LTE network, or just the enhanced 3g. I get about 6 mbps down and 1 up according to speedtest. Not bad, but I've seen people in my area getting 15 down and 8 or 9 up. Granted I'm on AT&T and they were on t-mobile. But my impression was that t-mobile wasn't going to be LTE until sometime in 2013.
I've set my APN to the settings in this thread. It's possible that I just won't see the LTE icon.
Any thoughts?
Do you have the N7100? If so I dont think that supports LTE.
beng2k said:
Do you have the N7100? If so I dont think that supports LTE.
Click to expand...
Click to collapse
No... I have the AT&T Version. had the N7100 while back
michaelanthonyaz said:
I flashed my note 2 with CleanRom. I like it. Seems fast enough and I like the features. The thing that bugs me is that my network status icon always shows as either 4g or H+. Never LTE and I wonder if I'm actually on an LTE network, or just the enhanced 3g. I get about 6 mbps down and 1 up according to speedtest. Not bad, but I've seen people in my area getting 15 down and 8 or 9 up. Granted I'm on AT&T and they were on t-mobile. But my impression was that t-mobile wasn't going to be LTE until sometime in 2013.
I've set my APN to the settings in this thread. It's possible that I just won't see the LTE icon.
Any thoughts?
Click to expand...
Click to collapse
Clean Rom uses an international base which means the icons are different. AT&T LTE = 4G, you can also verify which network you are connected to by going to Settings > About Device >Status > Mobile Network Type. If you are connected to LTE, it will show you LTE:14.
el_chiefo said:
Clean Rom uses an international base which means the icons are different. AT&T LTE = 4G, you can also verify which network you are connected to by going to Settings > About Device >Status > Mobile Network Type. If you are connected to LTE, it will show you LTE:14.
Click to expand...
Click to collapse
Depends. Mine Shows 4G for HSPA+ and LTE for LTE
Okay, so I'm currently running Jedi X 6.(something, the newest AT&T Rom). Now, I was running version 6 before with no problems. 4G was working fine (we recently got 4G in my area.) The tower is right down the road and I've always had full bars when on LTE. It seems that since, or at least within a few weeks of flashing this new Jedix6.whatever I can not for the life of me get LTE working. This isn't an "I can't tell if the icon means LTE" thread. I went into my "about device" and my mobile network type is always on HSPA:11, UMTS:3 or HSPAP:15. I tried flashing the stock modem in the "One stop shop" thread, I also made a new APN with all of the correct information for AT&T LTE. Neither worked. So my question is: is it the ROM? If so, what ROM definitely has it working? And if not, any suggestions as to what a fix might entail? It's probably a little selfish but I bought a phone with LTE capabilities and I'd like to use it. Any input is appreciated!
Bliznade said:
Okay, so I'm currently running Jedi X 6.(something, the newest AT&T Rom). Now, I was running version 6 before with no problems. 4G was working fine (we recently got 4G in my area.) The tower is right down the road and I've always had full bars when on LTE. It seems that since, or at least within a few weeks of flashing this new Jedix6.whatever I can not for the life of me get LTE working. This isn't an "I can't tell if the icon means LTE" thread. I went into my "about device" and my mobile network type is always on HSPA:11, UMTS:3 or HSPAP:15. I tried flashing the stock modem in the "One stop shop" thread, I also made a new APN with all of the correct information for AT&T LTE. Neither worked. So my question is: is it the ROM? If so, what ROM definitely has it working? And if not, any suggestions as to what a fix might entail? It's probably a little selfish but I bought a phone with LTE capabilities and I'd like to use it. Any input is appreciated!
Click to expand...
Click to collapse
so you using the PTA apn? Cause a rom wont stop you from using LTE... So your saying recently 4G was turned on in your area? cause AT&T Calls HSPA+/3G they call it 4G and LTE is called 4G LTE.
Also how do you know LTE is not working? Speed tests? No 4G icon? No/slow data?
Just curious, because I have noticed sometimes when in 4G LTE areas my data is slow/unusable with full bars and legit 4G LTE connection.
Sent from my Nexus 7 using XDA Premium HD app
i dont know whats in your market area, but in mine the LTE has been off and on the past few days
Okay, as I stated in the OP I have been using LTE 4G. About 2-3 months ago they put 4G LTE in my area which is about an hour from Cleveland Ohio. Also I frequently go to Cleveland on weekends and they've had it for at least a year, so I know it's not just the towers in my area, as I used to get LTE there and at home, and now I don't get it in either place. I know it's not LTE anymore because I'm getting the H+ symbol along with the info from "about device" that I put in the OP. If my phone was connected to 4G LTE it would say LTE:14. I hope that helped clear the air of some things... Any other ideas? So a rom won't affect it at all?
Also this is the APN I tried to put in:
Name: ATT Phone
APN: Phone
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
APN type: default,mms,supl
APN protocol: IPv4
I have the ATT SGH-I747 with Baseband I747UCDLK3. The phone was rooted, CWM 6.0.3.1 Touch was installed, and has been running CM 10.1.x nightlies for a while and now is finally running the latest stable release.
When LTE was enabled by TMobile in Atlanta recently, I went from having a solid/working 3G/H+ data connection to no data at all. It is as if the phone would persistently try to connect to the LTE network and fail. It would also try to drop back down to 3G/H+ but have no working data connection ever since the day TMobile turned on LTE in Atlanta.
As a workaround, I set the phone to use Preffered network mode as: GSM/WCDMA and the Data has been working fine on 3G/H+ but of course not using LTE.
Is there any way to get LTE working in this configuration? Could this be a problem with the Baseband or is it CM 10.1.x?
TIA for any information you may provide to help me fix this problem.
dijuremo said:
I have the ATT SGH-I747 with Baseband I747UCDLK3. The phone was rooted, CWM 6.0.3.1 Touch was installed, and has been running CM 10.1.x nightlies for a while and now is finally running the latest stable release.
When LTE was enabled by TMobile in Atlanta recently, I went from having a solid/working 3G/H+ data connection to no data at all. It is as if the phone would persistently try to connect to the LTE network and fail. It would also try to drop back down to 3G/H+ but have no working data connection ever since the day TMobile turned on LTE in Atlanta.
As a workaround, I set the phone to use Preffered network mode as: GSM/WCDMA and the Data has been working fine on 3G/H+ but of course not using LTE.
Is there any way to get LTE working in this configuration? Could this be a problem with the Baseband or is it CM 10.1.x?
TIA for any information you may provide to help me fix this problem.
Click to expand...
Click to collapse
Correct me if I'm wrong, but T-Mobile uses different LTE frequency than AT&T.
Finally got it working, 4G!!!!!!
czechpunk said:
Correct me if I'm wrong, but T-Mobile uses different LTE frequency than AT&T.
Click to expand...
Click to collapse
I have finally gotten it to work. The problem was that the APN information necessary for LTE was missing.
I created a new APN manually with the information from:
http://forum.xda-developers.com/showthread.php?t=2236735
Name : T-Mobile LTE
APN: fast.t-mobile.com
MMSC: http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS Protocol: WAP 2.0
MCC: 310
MNC: 260
APN Type: default,supl,admin,dun,mms
Now the phone is working properly at 4G speeds, speed tests show over 25Mbps down and 10 Mbps up.
Thanks for the info!
Sent from my SAMSUNG-SGH-I747 using xda premium
Please read forum rules before posting
Questions and help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Hey, I have tmobile as my carrier and an unlocked at&t S3 i747. What baseband/modem are you using? I can't get a strong signal at all.
weird issues
So I have an issue. I have a i747 and have T-Mobile. My internet works fine. Sometimes. If I want to brows the web I have to first make a call And then my internet just starts to work. Usually... Can some one help me out.