i just flash Nova Kernel v1.5 and all thing was ok today i turn on my phone and now the phone not boot he stock on the jelly bean logo from the kernel
i tried to flash the stock room with flashtool and i have an error: ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0009";ERR_DYNAMIC="Final data verification failed";
i tried more stock rom's and he show like he flash the rom 100% but when i turn on the phone the jelly bean logo from the kernel still there like the flashtool do nothing
i brick my phone ?
how can i fix this ? the phone is new (1 week)
Flash stock firmware with flashtool
Sent from my Nexus 7 using xda app-developers app
like i say i tried this but i got an error :/
The kernel you flashed is for jb so stock ics wont work with this.
Sent from my LT30p using xda premium
i try to flash the stock kernel but the same problem the old kernel is still there
blior32017 said:
i try to flash the stock kernel but the same problem the old kernel is still there
Click to expand...
Click to collapse
Have you tried this kernel?
http://forum.xda-developers.com/showthread.php?t=1761778
Sent from my LT30p using xda premium
i flash the file in cmd commend because the recovery of the kernel is not working and no success :/
i tried every thing nothing change the kernel or the recovery is not change :'(
Ow i'm sorry didn't read that... But have you tried to check '' no final vertification''? Before you flash the rom you will see that option.
Hope that works !
Sent from my Nexus 7 using xda app-developers app
There are files marked their default option "no
Final data verification
"And some not marked
What has marked the installation goes 100 percent all installed but when I turn on the device nothing not installed
And these are not marked the flashtool straight brings me the error "ERROR - ERR_SEVERITY =" MAJOR "; ERR_CODE =" 0009 "; ERR_DYNAMIC =" Final data verification failed "
Very strange, have a look at this thread :
http://forum.xda-developers.com/showthread.php?p=33032165
Sent from my Nexus 7 using xda app-developers app
yes but i dont understand want i need to choose which of the tricks is for my phone
you can help me to choose one ?
This happened to me about a week ago too, but dont panic. Just switch off your phone and keep pressing volume up until the c screen shows up.. from there just recover from a previous backup or flash a new kernel / rom. Most probably you got the wrong version for your current rom.
Sent from my Xperia S using xda app-developers app
kulapips said:
This happened to me about a week ago too, but dont panic. Just switch off your phone and keep pressing volume up until the c screen shows up.. from there just recover from a previous backup or flash a new kernel / rom. Most probably you got the wrong version for your current rom.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
if i press volume up key i enter to the recovery of the kernel and i dont have any of backup and i cant plug the phone to the computer becuase the computer dont recognize the phone in recovery :/
Probably download a stock firmware first and flash with flashtool on fastboot.
I think thats what i did to repair the problem.
If youre not familiar just google it its pretty straightforward.. and there are lota of threads here that offer stock roms
Sent from my Xperia S using xda app-developers app
i know how to flash a stock rom but it's dont work for my
i flah with flashtool and fastboot but no success
All processes are done but the device is not getting what I'm doing
It drives me crazy
pls help :/
blior32017 said:
pls help :/
Click to expand...
Click to collapse
I have this problems.. your phone never started working?
blior32017 said:
if i press volume up key i enter to the recovery of the kernel and i dont have any of backup and i cant plug the phone to the computer becuase the computer dont recognize the phone in recovery :/
Click to expand...
Click to collapse
Did you try this - Go into recovery, then go to mount&storage---> Mount USB storage. Then plug your phone in. Copy the rom that you need and flash. For your reference, stock ics zip - http://forum.xda-developers.com/showthread.php?t=2005595 Don't forget to do all data wipes in CWM.
If it is not recognized, go to device manager and tell us what you see there.
After flashing the rom in CWM if it still doesn't boot, then try flashing a stock ics based kernel like Advanced Stock ICS Kernel from CWM.
abcdjdj said:
Did you try this - Go into recovery, then go to mount&storage---> Mount USB storage. Then plug your phone in. Copy the rom that you need and flash. For your reference, stock ics zip - http://forum.xda-developers.com/showthread.php?t=2005595 Don't forget to do all data wipes in CWM.
If it is not recognized, go to device manager and tell us what you see there.
After flashing the rom in CWM if it still doesn't boot, then try flashing a stock ics based kernel like Advanced Stock ICS Kernel from CWM.
Click to expand...
Click to collapse
When I install beckup, I have this error:
Code:
Error while restoring /system!
When I install ROM (ICS), he werry fast install, and nothing happens after reboot
PLS help ;(
kris312 said:
When I install beckup, I have this error:
Code:
Error while restoring /system!
When I install ROM (ICS), he werry fast install, and nothing happens after reboot
PLS help ;(
Click to expand...
Click to collapse
Okay then what happens when you flash a kernel from CWM?
Edit:- Error while restoring /system is because you are trying to restore a stock ics or stock based ics rom from CWM while your kernel is for AOSP roms. Just flash Advanced Stock ICS Kernel for Xperia S. Then restore your backup
Related
I Have Defy+ Android 2.3.6
I Rooted It And Installed 2ndinit Then I Reboot To Recovery And Installed CM9
And CM9 Kernel
When I Reboot My Phone
Its Shows MOTOROLA LOGO And Bootloader Opened Automatically
And Its Shows That:
Bootloader
09.10
Err:A5,69,35,00,27
Battary OK
OK to Program
Transfer Mode:
USB
PLZ Help
Try to flash the original firmware (the firmware which was before the CM).
If the flash firmware does not succesfull, try to pull out the battery and wait about an hour. And once again try to flash.
ps Sorry for bad english(
no need to wait after flash...
if it doesnt boot...
goto stock recovery and wipe data...
and next time when i try cm9 dont flash kernel
...
Sent from my MB525 using xda premium
Ant-ON said:
Try to flash the original firmware (the firmware which was before the CM).
If the flash firmware does not succesfull, try to pull out the battery and wait about an hour. And once again try to flash.
ps Sorry for bad english(
Click to expand...
Click to collapse
Can U Send Me Alink For This FirmWare??
nogoodusername said:
no need to wait after flash...
if it doesnt boot...
goto stock recovery and wipe data...
and next time when i try cm9 dont flash kernel
...
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
I Can't Open Stock Recovery
Black Screen Without Tringle Or Small Android
u may flash the 2.3 core.
Hooda_mask said:
Can U Send Me Alink For This FirmWare??
I Can't Open Stock Recovery
Black Screen Without Tringle Or Small Android
Click to expand...
Click to collapse
I mean flash stock then open recovery the wipe!
Sent from my MB525 using xda premium
Hi guys,
well,i did something really stupid.
I was installing Cyanogenmod 9.1 to a friends phone,after i flashed the new bootloader i realised i wasn't able to insert the sdcard containing the CM9.1 rom,it has no sd-slot...
So now the phone doesn't boot anymore,except for fastboot and CWM,since i have no idea how to get the CM image to the internal storage i'm requesting the original boot.img so i can flash it back to the phone and transfer the CM image to internal storage.
Any help would be greatly appreciated.
Thanks in advance.
Edit: ADB is also working but i can't push CM to internal storage because it's read-only.
Edit2: I solved it,eventually...
Greetz
How did you solved it, i have the sme problem here
Use ADB to push the rom to internal storage and use CWM to install the rom.
And how do i do that?
Can you help a little bit.
Pihkal said:
Use ADB to push the rom to internal storage and use CWM to install the rom.
Click to expand...
Click to collapse
ff20000 said:
And how do i do that?
Can you help a little bit.
Click to expand...
Click to collapse
An easier solution would be to mount USB storage from CWM then transfer the files from your PC :good:
As a last resort don't forget you can always use Sony's repair/update software to restore the phone and start again This has saved me a couple of times
Sent from my GT-P7510 (CM10 nightly) using Tapatalk 2
gibbylinks said:
Phone:Sony Xperia S LT26i (Locked Bootloader)
Android Version: 4.0.4
Software number: Stock
Kernel version: 3.08
Baseband version: 8660-AAABQOLYM-314010-22
Build number: 6.1.A.2.45
Recovery: None
Click to expand...
Click to collapse
why u don't update your phone to 6.1.A.2.50 or its not available for your country? everyone running on .50.
xeshan88 said:
why u don't update your phone to 6.1.A.2.50 or its not available for your country? everyone running on .50.
Click to expand...
Click to collapse
We don't run .50 in Dk or in Scandinavia I think!!!!!!
I use .45 stock 6919 no root no mod and relocked bootloader, after a time with unlocked bl and root
And now it's very smooth and no lag no glitc and redraw every thing works normal ex download musicinfo in walkman app and placesharing in sms app.
.50 is not available in Dk via normal way
Sent from my LT26i using xda premium
I just yesterday root my phone for first time and no bootloader unlock still n m using Miui 2.12.29 new one but im very satisfied with battery life. My Phone was also Virgin like urs. He he.
Sent from my LT26i using xda app-developers app
fareeed said:
An easier solution would be to mount USB storage from CWM then transfer the files from your PC :good:
Click to expand...
Click to collapse
Dude, or, anyone.. I've tried Linux x64 and Windows x86 and I can't get the phone (LT26i) )to show up on my PC while it's in CWM: what am I not doing?
By the by - it's bootlooping: It had the orignal OS, then CM10.1 nightly, which was fine but my mate didn't like it..
flashtool let me put an official ICS back on board, then tried a different CM10.1 nightly, it had a few bugs of course,
so I went into CM settings/system/whatevers, searched for stable updates, and chose 9.1, dl'd and installed from the menu right there.. boot first boot got to like 30 mins so I killed it and did a restore (this may have been stupid). Which didnt work.
So I tried using Flashtool (9.0.0) to reinstall the official ICS.. and it fails. Flashtool gets as far as flashing the kernel and then it bails out.
So now, I don't have a ROM to go into to select any options or anything, or to be able to get it to show on my PC. If I can get it to show in CWM, I can sort this mess out.
Also, I have tried the 'mount USB storage' option in CWM. And I've tried mounting and unmounting stuff in CWM. Nada.
Please help!
As the title says, the FXP kernel bricked my phone and I can't install another ftf file over it because everytime i try to do it via flashtool it gets unplugged form fastboot in flashtool while it's still in that fastboot. I think that's because I can't acces the cache anymore.
Can somebody help !! :crying:
TheFrutzinator said:
As the title says, the FXP kernel bricked my phone and I can't install another ftf file over it because everytime i try to do it via flashtool it gets unplugged form fastboot in flashtool while it's still in that fastboot. I think that's because I can't acces the cache anymore.
Can somebody help !! :crying:
Click to expand...
Click to collapse
Download sony's official flashtool and flash stock firmware..
Sent from my iPhone 6 using Key Lime Pie
Are you using stock ROM?
If ya then just flash back your stock kernel
Sent from my Xperia S using xda app-developers app
solved
Solved
Just a suggestion, but maybe u should post how u fixes ur phone so other people can search on it if they have the same symptoms.
Sent from my Galaxy Nexus using xda app-developers app
Please post fix.
~Jaramie
Sent from my ION.
I solved it by doing:
1. Factory reset
2. Then check if you can mount system and cache. If you cannot then wipe /data
3. Install another kernel and then install fxp kernel again (I know this sounds crazy)
4. After installing fxp kernel again install fxp rom
Then the phone should be running again
Hi, so I tried to flash (using fastboot) DooMsKernel v14, it all looked nice and good,
but after that I tried to restart/enter recovery mode, and nothing happened.
My PLAY only reacts to power button by vibrate, and can enter to fastboot.
I tried to flash it again and flash another ROM (CM9), nothing worked.
Any help please?
Its fairly impossibly to brick the play. Since it can get into fastboot bootloader must be unlocked flash both kernel and Rom to stock.
Sent from my LT28i using xda app-developers app
psxpetey said:
Its fairly impossibly to brick the play. Since it can get into fastboot bootloader must be unlocked flash both kernel and Rom to stock.
Sent from my LT28i using xda app-developers app
Click to expand...
Click to collapse
I tried to flash ReFlash ftf using flashtool, but at some point it said an error when it tried to push a packet to the phone, I can't remember what it was. That was yesterday. I charged the phone all night because I thought it was battery problem, and today I tried flashing again but when I connect the phone in flash mode it connects it on fastboot tmode. Tried pulling the battery and connect again, idnt work.
I realy dont know what to do..
Edit:
I tried again and I can connect to flash mode, will try to flash the ftf again.
YechiamTK said:
I tried to flash ReFlash ftf using flashtool, but at some point it said an error when it tried to push a packet to the phone, I can't remember what it was. That was yesterday. I charged the phone all night because I thought it was battery problem, and today I tried flashing again but when I connect the phone in flash mode it connects it on fastboot tmode. Tried pulling the battery and connect again, idnt work.
I realy dont know what to do..
Edit:
I tried again and I can connect to flash mode, will try to flash the ftf again.
Click to expand...
Click to collapse
Ok, so I succeeded. Now I'm trying to update from update center to .42 (I have .238), but the installation fails.
1. Any help on that?
2. Did the ReFlash unrooted my phone?
YechiamTK said:
Ok, so I succeeded. Now I'm trying to update from update center to .42 (I have .238), but the installation fails.
1. Any help on that?
2. Did the ReFlash unrooted my phone?
Click to expand...
Click to collapse
1.it is because of unlocked bootloader
2.yes it unrooted ur phone
Sent from my R800i using xda premium
raminta said:
1.it is because of unlocked bootloader
2.yes it unrooted ur phone
Sent from my R800i using xda premium
Click to expand...
Click to collapse
So what am I suppose to do? root again and try to flash different kernel?
If the answer is yes, than back to the first thing I did, why I came to this problem - I tried to flash a kernel,
so can u tell me what is the safest way to do it (so I wont have to deal with this problem all over again)?
YechiamTK said:
So what am I suppose to do? root again and try to flash different kernel?
If the answer is yes, than back to the first thing I did, why I came to this problem - I tried to flash a kernel,
so can u tell me what is the safest way to do it (so I wont have to deal with this problem all over again)?
Click to expand...
Click to collapse
You have an unlocked bootloader just flash doom the kernel and put a Rom on your sd to install. Then first time you boot you press the back button or the menu one or something.and then doom kernel will let you select a Rom.
Sent from my LT28i using xda app-developers app
psxpetey said:
You have an unlocked bootloader just flash doom the kernel and put a Rom on your sd to install. Then first time you boot you press the back button or the menu one or something.and then doom kernel will let you select a Rom.
Sent from my LT28i using xda app-developers app
Click to expand...
Click to collapse
Didn't really get it..
U say I should flash doomkernel and install new ROM?
Any instructions on how to do it the SAFEST WAY? I don't want to have boot problems again..
YechiamTK said:
Didn't really get it..
U say I should flash doomkernel and install new ROM?
Any instructions on how to do it the SAFEST WAY? I don't want to have boot problems again..
Click to expand...
Click to collapse
The safest way is flashing kernel with flashtools
I think ur problem of boot is because of corrupted download download the kernel again and try to flash it if doesn't worked try an other kernel for example lupus kernel
Sent from my R800i using xda premium
raminta said:
The safest way is flashing kernel with flashtools
I think ur problem of boot is because of corrupted download download the kernel again and try to flash it if doesn't worked try an other kernel for example lupus kernel
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Ok, so now I try to root the PLAY again, using OneClickRoot. Only one problem - it gets stuck in "Verify Rooting Compatibility"..
And I also tried OneClickRoot with my friend`s phone (LG Optimus Black) - same result, stuck in "Verify Rooting Compatibility"..
Is this OneClickRoot`s problem`s, or it just suppose to take long time, or what?
raminta said:
The safest way is flashing kernel with flashtools
I think ur problem of boot is because of corrupted download download the kernel again and try to flash it if doesn't worked try an other kernel for example lupus kernel
Sent from my R800i using xda premium
Click to expand...
Click to collapse
The firat time you start doomkernel it will seem like your phone is bricked as soon as you press power atart pressing the back button and a screen will come up that will allow you to install a Rom off the sd card. I thought mune was bricked firat time. When doom starts the blue led starts its not flash its just what it does.
1. Turn on the phone
2. Press back button until Rom flashing screen pops up
3. Install Rom from sd
4. Boot rom
Sent from my LT28i using xda app-developers app
YechiamTK said:
Ok, so now I try to root the PLAY again, using OneClickRoot. Only one problem - it gets stuck in "Verify Rooting Compatibility"..
And I also tried OneClickRoot with my friend`s phone (LG Optimus Black) - same result, stuck in "Verify Rooting Compatibility"..
Is this OneClickRoot`s problem`s, or it just suppose to take long time, or what?
Click to expand...
Click to collapse
Most custom Roms are prerooted, so if you're going to install one anyway, you don't have to root your Play manually.
If you can't flash .ftf through flashtool, you could try another download source, had a similar problem a few months ago, many downloads simply didn't work. And using another USB port on my computer fixed my problem with the flash process getting stuck while flashing with flashtool, was strange, but solved the problem.
By the way, if this .238 is android 2.3.4 it probably can't be rooted, if you want stock rom with root you have to downgrade to 2.3.3
So is it qorking yet?
Sent from my LT28i using xda app-developers app
psxpetey said:
So is it qorking yet?
Sent from my LT28i using xda app-developers app
Click to expand...
Click to collapse
Well, I'm rooted with .238, but my problem is that google apps don't work - it tries to download apps and then stop the ddownload, without any error (Every app)..
So I thought I would try to install a costum ROM, problem is - I cant install recovery.. Tried a few methods, all didn't work.. 2 option, either I didn't succeed on download and installing the recovery, or I can't boot into it..
Any help pls?
For some reason DoomKernelV14 refuses to boot on my phone.
From Stock GB (unlocked bootloader), I tried flashing it with fastboot by using
Code:
fastboot flash boot boot.img
(After re-naming the DoomKernelV14.img file to boot.img of course and putting it in my fastboot folder).
After that, fastboot reported that flashing was successful, so I went to turn my phone on so I could boot into recovery so I could install Dixperia 2, and all I got was a quick vibrate and a black screen of nothing. Having done that I did a battery pull so I could put the phone back into fastboot mode, and use the commands:
Code:
fastboot erase userdata
fastboot erase system
After this I could put the phone back into Flash Mode (which I was unable to do after attempting to flash DoomKernel. From here I flashed the Stock ROM so I could turn my phone back on again.
After this I tried the above again, using the erase userdata/system commands above before I flashed DoomKernel and had the same problem.
Could anyone offer any insight as to what I might be doing wrong?
My phone is using a -64 baseband, and a .62 build number.
BUMP
Have you tried redownload the kernel? Maybe your download is corrupted.
And after your phone vibrated and stayed dark, have you unpluged your cable and took out your batterie a few seconds and then tried to start it again? And you shoud always erase userdata, dalvik and perform a factory reset if you flash a new rom or use a new kernel.
EP35DS4 said:
Have you tried redownload the kernel? Maybe your download is corrupted.
And after your phone vibrated and stayed dark, have you unpluged your cable and took out your batterie a few seconds and then tried to start it again? And you shoud always erase userdata, dalvik and perform a factory reset if you flash a new rom or use a new kernel.
Click to expand...
Click to collapse
Yes done all that, to no avail Each time I have done this I have been going from Stock GB (unlocked bootloader). I also tried re-downloading the Kernel and that did not work. I have installed Cyanogenmod 7.2 in the past with no problems (before going back to Stock GB) so how come DoomKernel is causing no end of problems?
xenobia144 said:
Yes done all that, to no avail Each time I have done this I have been going from Stock GB (unlocked bootloader). I also tried re-downloading the Kernel and that did not work. I have installed Cyanogenmod 7.2 in the past with no problems (before going back to Stock GB) so how come DoomKernel is causing no end of problems?
Click to expand...
Click to collapse
It seems like many users have problems with DoomKernel v14 (just look at the last 10 questions). Maybe you could just try another kernel, like lupus. is this the first time you try dommkernel v14 or worked it in the past for you?
---------- Post added at 12:28 PM ---------- Previous post was at 12:22 PM ----------
And maybe this could help you:
psxpetey said:
The firat time you start doomkernel it will seem like your phone is bricked as soon as you press power atart pressing the back button and a screen will come up that will allow you to install a Rom off the sd card. I thought mune was bricked firat time. When doom starts the blue led starts its not flash its just what it does.
1. Turn on the phone
2. Press back button until Rom flashing screen pops up
3. Install Rom from sd
4. Boot rom
Click to expand...
Click to collapse
It's from one of those theards i mentioned [Q]Play bricked?
The only people who have trouble with kernels seem to not read the directions before they flash it they flash it and think omg im bricked it wont turn on . If the blue led shows doom is working you just need a Rom on you sd card and start pressing the back button as soon as you see the blue led and an installation screen will pop up. This is so you dont have to see the install screen everytime you boot. Before you install a Rom make sure its compatible with doom
psxpetey said:
The only people who have trouble with kernels seem to not read the directions before they flash it they flash it and think omg im bricked it wont turn on . If the blue led shows doom is working you just need a Rom on you sd card and start pressing the back button as soon as you see the blue led and an installation screen will pop up. This is so you dont have to see the install screen everytime you boot. Before you install a Rom make sure its compatible with doom
Click to expand...
Click to collapse
Except there was no blue light on, nor any light at all for that matter. Also, since I was not able to get as far as even installing a ROM, I should also note that I had done my research, and was going to be installing Dixperia 2 (and the author of that ROM says to use DoomKernelV14). I was going from Stock GB.
I ought to note that I never said it was bricked, as I have been able to get back to Stock GB, as noted in the original post.
Before you go walking into posts implying people didn't read the instructions you should probably read the original post.
Now does anyone have anything helpful to add?
psxpetey said:
The only people who have trouble with kernels seem to not read the directions before they flash it they flash it and think omg im bricked it wont turn on . If the blue led shows doom is working you just need a Rom on you sd card and start pressing the back button as soon as you see the blue led and an installation screen will pop up. This is so you dont have to see the install screen everytime you boot. Before you install a Rom make sure its compatible with doom
Click to expand...
Click to collapse
well just keep trying then there shouldnt be an issue. You wont break if from trying
Sent from my LT28i using xda app-developers app
psxpetey said:
well just keep trying then there shouldnt be an issue. You wont break if from trying
Sent from my LT28i using xda app-developers app
Click to expand...
Click to collapse
After ten attempts it still did not work, hence my original question.
Post the logfile from flashtool and the logfile for the install from your phone would make figuring this out easier.
Sent from my LT28i using xda app-developers app
psxpetey said:
Post the logfile from flashtool and the logfile for the install from your phone would make figuring this out easier.
Sent from my LT28i using xda app-developers app
Click to expand...
Click to collapse
How does one go about obtaining these?
Flashtool is a simple copy paste when you do the install. Im sure you can find the log in flashtools files. The logfile from the play should be in /cache. And is a. Log file. Maybe called lastinstall.log or something similiar.
I havent had a play for a while so dont quote me on that lol but if its not there im sure someone.in the forum knows where it is.
Sent from my LT28i using xda app-developers app
Are you on Windows 8 by any chance?
Sent from my LT28i using xda app-developers app
im having the same damn problem:crying:
Anyway if your on Windows 8 flashtool wont work properly.
Sent from my LT28i using xda app-developers app