XXDMA6 or UVALL4 - T-Mobile Samsung Galaxy Note II

I'm running jedi uvall4 and its quite nice. I am wondering if there is a significant enough improvement in the xxdma6 build that dropped yesterday to warrant a swap? Thoughts?

I'm running the Xxdma6 and getting super awesome battery life, smooth as ever. No crashes no problems on my end.
Sent from my GT-N7105 using xda app-developers app

I'm unrooted. How do I get ahold of this XXDMA6 build? Checked 'Software Update' and Kies with no luck.

T-Mobile better be getting an update ready for us. LL4 is too greedy over my battery.

jaekidd1012 said:
I'm unrooted. How do I get ahold of this XXDMA6 build? Checked 'Software Update' and Kies with no luck.
Click to expand...
Click to collapse
Right here. Flash via cwm or twrp

teshxx said:
Right here. Flash via cwm or twrp
Click to expand...
Click to collapse
He said he's unrooted.. how would he have custom recovery

eurohomie said:
He said he's unrooted.. how would he have custom recovery
Click to expand...
Click to collapse
He can root. Flash cwm or twrp. Then flash xxdma6. That's how

Related

how to root t999uvdlh3 JB 4.1.1

I just installed the new version of android jelly bean and I have root permissions
wait, wtf? jelly bean came out for t mobile in the u.s.?
eln3n3d3ll0r3ns said:
I just installed the new version of android jelly bean and I have root permissions
Click to expand...
Click to collapse
you have root or your looking for root? im going to try the odin su once i get home.
Cobra281 said:
wait, wtf? jelly bean came out for t mobile in the u.s.?
Click to expand...
Click to collapse
It's a leaked ota
Sent from my SGH-T999
I dont beleive that there is a recovery that is sticking yet. When I flashed it I did not have root permission. Went back to L2, JB was to laggy. Ofcourse it is only a patch.
how did you do it? i lost root when i tried it. where did you find the rooted version of T999UVDLH3?
fcortes626 said:
how did you do it? i lost root when i tried it. where did you find the rooted version of T999UVDLH3?
Click to expand...
Click to collapse
Wildchld just release a rom with jb patch. I go grab it in the dev section.
Sent from my SGH-T999
So when this ota update hits, it's ok to update right? Devs give the ok, and we'll be able to attain root even after downloading the ota jelly bean update?
Sent from my SGH-T999 using xda premium
Cobra281 said:
So when this ota update hits, it's ok to update right? Devs give the ok, and we'll be able to attain root even after downloading the ota jelly bean update?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
If when the official update is released and you want the official ota you can Odin back to stock and grab it but I suggest you wait it out till devs get a rom you can flash without the worries of losing root. Being able to be rooted after jb ota is still to be determined cuz well no one has it yet.
Sent from my SGH-T999
chrisram88 said:
If when the official update is released and you want the official ota you can Odin back to stock and grab it but I suggest you wait it out till devs get a rom you can flash without the worries of losing root. Being able to be rooted after jb ota is still to be determined cuz well no one has it yet.
Sent from my SGH-T999
Click to expand...
Click to collapse
It'll be easy. The beauty of an Odin flash able recovery means no matter what we will have a custom recovery. I rooted the leak jb build by flashing cwm in Odin. I unchecked reboot so I could pull the battery and key combo into recovery. If you let it boot after Odin recovery you have to Odin recovery again cus it'll be overwritten. When you get into recovery just flash superuser and binary and you'll have root.
Sent from my SGH-T999 using xda app-developers app
Download the official Superuser binary+app at: "h tt p:/ /a n droid su.c om/ sup eru ser/" (no spaces), and flash it in your recovery.
If your recovery is not working (due to the update) or whatever, then just reflash it using odin or heimdall. flash either CMW or TWRP:
"ht tp ://ww w.cl ockw orkmo d.co m/ro mma nager/"
"ht tp: //t eamw .i n /pro ject/t wrp2 /106"
^ NO SPACES (XDA not allowing me to post links before 10 posts)
I think the odin links are pretty famous by now, so I won't bother to post them.
saldebot said:
I dont beleive that there is a recovery that is sticking yet. When I flashed it I did not have root permission. Went back to L2, JB was to laggy. Ofcourse it is only a patch.
Click to expand...
Click to collapse
How did you do that? I failed on check sum level. Can you share the L2 rom?
new leak rom
hryder said:
How did you do that? I failed on check sum level. Can you share the L2 rom?
Click to expand...
Click to collapse
I flashed really experimental , everything fc

[rom] [update] Ma6 ota update link

This is the stock 4.1.2 official sprint update MA6.
You may have to flash stock recovery to install it. Rename file update. Zip and place on the root of internal storage.
Then you have to reroot. It's claimed the voodoo app works for quick reroot.
This is a direct link to the Google servers
Enjoy.
http://android.clients.google.com/p...0/ac3e74a5a71c.update_SPH-L710_LJ7_to_MA6.zip
Galaxy S 3 32gb ...Sprint
Chemistry rom self modded. Multi Window .yahhhyuhhh
Robalboa said:
This is the stock 4.1.2 official sprint update MA6.
You may have to flash stock recovery to install it. Rename file update. Zip and place on the root of internal storage.
Then you have to reroot. It's claimed the voodoo app works for quick reroot.
This is a direct link to the Google servers
Enjoy.
http://android.clients.google.com/p...0/ac3e74a5a71c.update_SPH-L710_LJ7_to_MA6.zip
Galaxy S 3 32gb ...Sprint
Chemistry rom self modded. Multi Window .yahhhyuhhh
Click to expand...
Click to collapse
Do i have to be on stock ROM or can i be on any normal touchwiz ROM to flash this
Sent from my SPH-L710 using xda app-developers app
Stock ROM & recovery are required.
Sent from my SPH-L710 using Tapatalk 2
ChadH42 said:
Stock ROM & recovery are required.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Can you provide me with a zip i can restore with twrp or cwm because i don't want to Odin i would rather use a stock backup
Sent from my SPH-L710 using xda app-developers app
I just updated to ma4 and I notice it says lj7 to ma6, will this still work even tho I am on ma4?
Sent from my SPH-L710 using xda app-developers app
Robalboa said:
This is the stock 4.1.2 official sprint update MA6.
You may have to flash stock recovery to install it. Rename file update. Zip and place on the root of internal storage.
Then you have to reroot. It's claimed the voodoo app works for quick reroot.
This is a direct link to the Google servers
Enjoy.
http://android.clients.google.com/p...0/ac3e74a5a71c.update_SPH-L710_LJ7_to_MA6.zip
Galaxy S 3 32gb ...Sprint
Chemistry rom self modded. Multi Window .yahhhyuhhh
Click to expand...
Click to collapse
ok anyones that's flashed this since its ota, does it include multiwindow or premier suite?
Texus915 said:
ok anyones that's flashed this since its ota, does it include multiwindow or premier suite?
Click to expand...
Click to collapse
No.
Sent From My Rooted, S-OFF'd Blackberry Curve using the iOS XDA Application for Android.
is there a WIKI with a list of all the updates with root and odexed and deodexed like with the evo4g and the s2? because I want a deodexed stock rom with root and I cant find lj7 and up anywhere only custom mods. Unless I am missing something because I haven't been around for a while.
DIABLO NEGRO said:
is there a WIKI with a list of all the updates with root and odexed and deodexed like with the evo4g and the s2? because I want a deodexed stock rom with root and I cant find lj7 and up anywhere only custom mods. Unless I am missing something because I haven't been around for a while.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1910947
So why would anyone want to flash a stock 4.1.2
Sent from my Samsung Galaxy S3 using Tapatalk 2
EvgeniX said:
http://forum.xda-developers.com/showthread.php?t=1910947
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1904099
This is what I'm about to use. It installs all pieces of the LJ7 firmware including recovery and radio. There's a root zip you can flash afterward to keep SU access. After that, I will setup SuperSu Pro to survive OTA updates and then run the MA6 OTA through the stock recovery. If you don't have SuperSu Pro or VooDoo OTA, you can always flash TWRP through Odin, and then flash your root zip, boot and then make your backup of the stock ROM.
CyberGmonster said:
So why would anyone want to flash a stock 4.1.2
Sent from my Samsung Galaxy S3 using Tapatalk 2
Click to expand...
Click to collapse
Im asking the same question. Just wait a day there will be a custom rom lol....
Lol so why does mine still say 4.1.1.
Only thing that changed its baseband version lol
Sent from my SPH-L710 using Tapatalk 2
jbadboy2007 said:
Im asking the same question. Just wait a day there will be a custom rom lol....
Click to expand...
Click to collapse
As long as you can preserve root, I think taking official updates is a good idea. You get the rom, you get the radio, you get any additional firmware updates, and you have a new base from which to keep your stock backup that everyone says you ought to keep. Besides, with Samsung, it's so easy to root a device. Just load Odin and flash a recovery. Flash an su.zip and boom, you're back in business. It's not like taking an update on an HTC device where you have to worry about the new boot loader (unless you had S-Off).
Hate to be *that guy* buuuut.
A.) This does not belong in the Development section. The sticky here says what belongs and what doesn't, and stock ROM patches are not custom development.
B.) This was already in the general section. No need to repost.
Just trying to help keep the place tidy and in order.
Sent from my SPH-L710 using Tapatalk 2
z143456 said:
I just updated to ma4 and I notice it says lj7 to ma6, will this still work even tho I am on ma4?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Don't think it will. You'll need to go back to LJ7 or just give it a few days and someone will post the full stock ROM - hopefully will all of the root/no root and wipe data/preserve data permutations.
http://www.youtube.com/watch?v=VDzUT716u58
Video from QBking77 explaining how to do this if anyone wanted a visual aid.
Flashed rerooted with voodoo took 2 minutes to reroot.
run flawlessly and the ma4 mods and some lj7 mods seem to work also.
:laugh:
zanderman112 said:
Hate to be *that guy* buuuut.
A.) This does not belong in the Development section. The sticky here says what belongs and what doesn't, and stock ROM patches are not custom development.
B.) This was already in the general section. No need to repost.
Just trying to help keep the place tidy and in order.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
my mistake for posting.:crying: I thought under the R and D it says:
'[R&D] - Research & Development for Devs only, when gathering data for a new projects'
this is gathering data for projects. im sure the rest of the devs will be upgrading their base off the new official update.
i always thought that the only 2 places for roms were in development and original dev.
my bad
Wired0980 said:
Lol so why does mine still say 4.1.1.
Only thing that changed its baseband version lol
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Because your still on an lj7 rom
Sent from my SPH-L710 using xda premium

Yes you should upgrade to MB1 4.1.2

Everybody should upgrade to MB1. i have rooted stock rom LJ7 4.1.1 before with cwm and just upgraded to MB1 4.1.2 .. i wasn't sure whether i should stay with 4.1.1 or not because i didn't want to mess up my phone but i'm glad i decided to upgrade it... My phone is so smooth now ..no lag or anything. i didn't even have to root it again after the upgrade. Just go to freeza xda thread. If your phone is rooted stock rom with cwm like mine.. just do the following below..
1. Download freeza Odexed MB1 zip and MB1 firmware zip. Then put them on you external sdcard. Boot to CWM
2. Wipe cache, wipe dalvik
3. Flash Firmware
4. Flash ROM
5. Reboot
BAM .. Your phone will be faster and everything will run smooth. Even my wifi tethering is still working.
I just want to share that with you guys.. good luck:good:
The broken auto complete is pretty annoying though.
Sprint GS3 2GB LTE - The People's ROM 3.14 - KT747 - sent from xda premium
SptMogul said:
Everybody should upgrade to MB1. i have rooted stock rom LJ7 4.1.1 before with cwm and just upgraded to MB1 4.1.2 .. i wasn't sure whether i should stay with 4.1.1 or not because i didn't want to mess up my phone but i'm glad i decided to upgrade it... My phone is so smooth now ..no lag or anything. i didn't even have to root it again after the upgrade. Just go to freeza xda thread. If your phone is rooted stock rom with cwm like mine.. just do the following below..
1. Download freeza Odexed MB1 zip and MB1 firmware zip. Then put them on you external sdcard. Boot to CWM
2. Wipe cache, wipe dalvik
3. Flash Firmware
4. Flash ROM
5. Reboot
BAM .. Your phone will be faster and everything will run smooth. Even my wifi tethering is still working.
I just want to share that with you guys.. good luck:good:
Click to expand...
Click to collapse
Do you lose any data when using this method?
ireknole said:
Do you lose any data when using this method?
Click to expand...
Click to collapse
You only lose data when you to a data or system (or internal memory) wipe. In SptMogul's method, he's just clearing cache, which might log yo out of some apps, but you won't lose any data.
ireknole said:
Do you lose any data when using this method?
Click to expand...
Click to collapse
topherk said:
You only lose data when you to a data or system (or internal memory) wipe. In SptMogul's method, he's just clearing cache, which might log yo out of some apps, but you won't lose any data.
Click to expand...
Click to collapse
No data lost.. and no need to login again.. it's like you just restarted your phone. I'm so happy.. let me know if you need any help.
Thank you! Would you mind posting the link where you found the downloads?
Sent from my SPH-L710 using Tapatalk 2
ireknole said:
Thank you! Would you mind posting the link where you found the downloads?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Its in the android development section, freezas thread
CNexus said:
Its in the android development section, freezas thread
Click to expand...
Click to collapse
silly CNexus, he wanted a link.
Here's a link!!!
topherk said:
silly CNexus, he wanted a link.
Here's a link!!!
Click to expand...
Click to collapse
Lol i guess, but I was too lazy to go back, copy and post it (im on mobile)
Plus its like the 7th one down...and theres always the search button
topherk said:
silly CNexus, he wanted a link.
Here's a link!!!
Click to expand...
Click to collapse
"she"...lol but thanks for the link!
---------- Post added at 11:30 PM ---------- Previous post was at 11:23 PM ----------
CNexus said:
Lol i guess, but I was too lazy to go back, copy and post it (im on mobile)
Plus its like the 7th one down...and theres always the search button
Click to expand...
Click to collapse
It's alright, I understand. I didn't see your reply before the link was posted, but I had searched for it earlier, but I got a lot of different results searching"Freeza" and weren't sure which ones were the originals. That's why I asked. Now I know for sure. Thanks!
I had bad luck with MB1 and went back to LJ7. Phone was laggy, especially the animations, and battery life seemed to be worse. Tried both the stock OTA as well as the custom ROMs, and both dirty flashes as well as clean ones. Will be sticking with LJ7 until the next update.
ireknole said:
It's alright, I understand. I didn't see your reply before the link was posted, but I had searched for it earlier, but I got a lot of different results searching"Freeza" and weren't sure which ones were the originals. That's why I asked. Now I know for sure. Thanks!
Click to expand...
Click to collapse
Yeah sorry about that, thought you would know
ireknole said:
Thank you! Would you mind posting the link where you found the downloads?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
topherk said:
silly CNexus, he wanted a link.
Here's a link!!!
Click to expand...
Click to collapse
Yes that's the right link ..that's where I got all the files from.
Sent from my SPH-L710 using xda app-developers app
sputnik767 said:
I had bad luck with MB1 and went back to LJ7. Phone was laggy, especially the animations, and battery life seemed to be worse.
Click to expand...
Click to collapse
My setup below is snappier than when I bought it new, with all the stock features and much more. TPR is super easy to dirty flash over TW, then theme it your way with Morphology. You might try it and you can always go back.
Sprint GS3 LTE MA7 MB1 - The People's ROM 3.14 - KT747 kernel - sent from xda premium
Slomodrop said:
My setup below is snappier than when I bought it new, with all the stock features and much more. TPR is super easy to dirty flash over TW, then theme it your way with Morphology. You might try it and you can always go back.
Sprint GS3 LTE MA7 MB1 - The People's ROM 3.14 - KT747 kernel - sent from xda premium
Click to expand...
Click to collapse
I have had very bad luck with KT747 kernel. Quadrant scores dropped from around 6100 to 4700 and Antutu scores dropped from around 11,000 to around 8,000. The entire device was laggy, especially animations. No amount of tweaking via the KTweaker app for governor settings and IO settings helped one bit. Even tried using the stock governor and scheduler with no help. I guess my device just doesn't agree with it.
The reason why I will not try TPR is because I simply don't like the theme it comes with and have no time or desire to mess with Morphology. The stock theme and icons are best IMO, and as far as I know, all the devs like to mess with the look of the ROM which isn't to my liking, For example, I hate the transparent dropdown notification pane.
JarrodJS said:
I tried updating and now my phone is frozen on the Samsung logo when booting up -_- any help?
Click to expand...
Click to collapse
You need to tell us what you did step by step... rooted on stock rom with CWM? did you follow the steps on the first post?
My mantra is if it's not broken, don't fix. My 4.1.1 is working just fine, great battery life etc, so i see no need to update to MB1. All i did was flash the MB1 modem just to have the latest radio.
I see nothing in 4.1.2 to bother with.
LordLugard, how did you stop the annoying sprint update to MB1 notifications?
LordLugard said:
My mantra is if it's not broken, don't fix. My 4.1.1 is working just fine, great battery life etc, so i see no need to update to MB1. All i did was flash the MB1 modem just to have the latest radio.
I see nothing in 4.1.2 to bother with.
Click to expand...
Click to collapse
Exactly. A small update to the camera seems to be about the extent of it.
glcK23 said:
LordLugard, how did you stop the annoying sprint update to MB1 notifications?
Click to expand...
Click to collapse
I am rooted with a custom recovery, TWRP, but stock. Accept the update, it will reboot phone and try and install and obviously fail. That's it.

Anyone flash TWRP and a ROM after OTA

I did a search and couldn't find an answer. I got the OTA (Thanks to my wife, while I still sleeping) I did get it rooted and knox disabled. Don't care about the knox flag because my warranty is already gone. So now my question is do any of the 4.3-4.4 ROMS work (Skynote, Ditto etc)? Can I flash TWRP with goo manager?
Thanks in advance!
Geeve
geeve420 said:
I did a search and couldn't find an answer. I got the OTA (Thanks to my wife, while I still sleeping) I did get it rooted and knox disabled. Don't care about the knox flag because my warranty is already gone. So now my question is do any of the 4.3-4.4 ROMS work (Skynote, Ditto etc)? Can I flash TWRP with goo manager?
Thanks in advance!
Geeve
Click to expand...
Click to collapse
I haven't flashed TWRP thru goo manager but I have thru ODIN. You can get it from here.
http://goo.im/devs/OpenRecovery/t0lteatt
I just got done flashing SKY NOTE 4.3 Edition MJ4-4.3 (AT&T Leak).
I can confirm twrp installs from goomanager as thats how I installed it and successfully flashed an aroma addon (just a mod NOT a rom) with no issues
Did you thank your Developer today?
Thanks to both of you! Getting goo now. Not sure if I am brave enough to flash a ROM yet though till i can see what others have done.
Geeve
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
geeve420 said:
Thanks to both of you! Getting goo now. Not sure if I am brave enough to flash a ROM yet though till i can see what others have done.
Geeve
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I'm not brave enough yet to rom either but I can confirm Xposed installs perfectly and gearbox works just enough that pie controls work.
If you do that don't turn ANYTHING else in gearbox on. Use Wanam to mod out with as its built for the note 2.
Did you thank your Developer today?
Thanks Jspex! Looking into them now
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
4.3 OTA to custom ROM
geeve420 said:
I did a search and couldn't find an answer. I got the OTA (Thanks to my wife, while I still sleeping) I did get it rooted and knox disabled. Don't care about the knox flag because my warranty is already gone. So now my question is do any of the 4.3-4.4 ROMS work (Skynote, Ditto etc)? Can I flash TWRP with goo manager?
Thanks in advance!
Geeve
Click to expand...
Click to collapse
I decided to be the sacrificial lamb and I can confirm that yes definitively you can go from stock 4.3 OTA to a custom 4.3 ROM. I updated to 4.3 OTA (dumb) and just now successfully flashed Ditto 3.1.1.
1. Root 4.3 OTA
2. Flash TWRP
3. Flash custom rom.
4. Run SuperSU
Some additional notes:
Did a dirty flash the first go around. The device didn't boot. Used the pull battery method to get into recovery (probably not necessary but oh well). Reflashed the rom this time using full wipe in AROMA (not in TWRP) and the device booted like a charm (even got an OTA Ditto 3.2 update bonus!).
Additionally AROMA didn't delete my data so I got to keep all my data from 4.3 OTA.
Last note my baseband is still MK6. I guess that's good because Ditto is still on MK5.
Lots of people have done this. What's so scary?
Sent from my GT-N7105 using XDA Premium 4 mobile app
JediMasterX V2 runs great on 4.3 bootloader. If you took the OTA to get to 4.3 then you are ready to go with JediMasterX just download the zip and follow the instructions in the OP.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
4.3 OTA to custom ROM
joe3681 said:
Lots of people have done this. What's so scary?
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you knew this information already, it would have been helpful of you to share this information with the group instead of chiming in after the fact.
Just read this but a quick read anywhere around here would've been an answer
Sent from my GT-N7105 using XDA Premium 4 mobile app
Thanks everyone!!
Why it was scary is when I posted there was a lot going on. I hadn't seen where someone had taken the update, then flashed a ROM. I had seen a lot about the leak but not MK6. There were quite a few folks having trouble restoring backups, soft bricking etc. and it was due to the locked down boot loader being hostile to changes. I just didn't want a soft brick and have to use my Infuse till I could get it back up.
As far as what I have read so far, no one has been able to get back to MK6 after downgrading or roming and the backups of the stock MK6 aren't working. The reason I asked is because not much was being said about how ROMs were acting with the locked bootloader. No one was talking about steps to take if you have the MK6 update to ROM.
I have since flashed and I am running Sky Note Air Vaniila now and all is well. Just wanted to see what troubles if any others were having to help keep ducks in a row That way when folks want to ROM they know which ones work with the new Bootloader.
Geeve

S4 Reception Issues

I apologize if this has been posted but I couldn't find it. I just updated my phone to 4.4.2. And it seems the reception is broken. 1-2 times a day i have to reboot my phone because it cannot find reception from the carrier. Anyone else experiencing this?
How did you update?
Sent from my SGH-M919 using Tapatalk
serio22 said:
How did you update?
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
i didnt do OTA, i found a stock 4.4.2 for M919 and flashed it with Odin
wing-zero said:
i didnt do OTA, i found a stock 4.4.2 for M919 and flashed it with Odin
Click to expand...
Click to collapse
it's weird all I have heard it's signal improvements..
wing-zero said:
i didnt do OTA, i found a stock 4.4.2 for M919 and flashed it with Odin
Click to expand...
Click to collapse
Did flash a new modem/radio also?
The NB4 (4.4.2) radio seems to be a big improvement over the older ones.
If you give us the link to where you downloaded what you flashed, that may help to determine what you flashed.
Rob
Flash the firmware twice with Odin
Sent from my SGH-M919 using Tapatalk
rlichtefeld said:
Did flash a new modem/radio also?
The NB4 (4.4.2) radio seems to be a big improvement over the older ones.
If you give us the link to where you downloaded what you flashed, that may help to determine what you flashed.
Rob
Click to expand...
Click to collapse
this is what i flashed with and no I didnt install the NB4
http://downloadandroidfiles.org/file.php/?File=/Galaxy%20S4/Stock%20Files/TMB-M919UVUFNB4-20140314115123.zip
ok so I flashed 4.4.2 NB4 Modem now, I'll let you know if I see improvement
this is the link i used http://forum.xda-developers.com/showthread.php?t=2678774
seems Im still getting the issue, not sure why though.
Did you flash it twice?
Sent from my SGH-M919 using Tapatalk
wing-zero said:
ok so I flashed 4.4.2 NB4 Modem now, I'll let you know if I see improvement
this is the link i used http://forum.xda-developers.com/showthread.php?t=2678774
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=2677252 and get either @ShinySide or @Fenny 4.4 package. Any other stock 4.4 package from Samsung is most likely buggy. I suggest 1 of these guys fixed packages for a bugless flash.
Sent from my SGH-M919
mrzhadow said:
Go here http://forum.xda-developers.com/showthread.php?t=2677252 and get either @ShinySide or @Fenny 4.4 package. Any other stock 4.4 package from Samsung is most likely buggy. I suggest 1 of these guys fixed packages for a bugless flash.
Sent from my SGH-M919
Click to expand...
Click to collapse
do I need to flash back to stock rom or can I do it on my rooted stock rom?
wing-zero said:
do I need to flash back to stock rom or can I do it on my rooted stock rom?
Click to expand...
Click to collapse
You can do it now. Make sure you do a full wipe once you flash it.
Sent from my SGH-M919
mrzhadow said:
You can do it now. Make sure you do a full wipe once you flash it.
Sent from my SGH-M919
Click to expand...
Click to collapse
full wipe as in factory reset? sorry for being a noob :good:
wing-zero said:
full wipe as in factory reset? sorry for being a noob :good:
Click to expand...
Click to collapse
Yes get Odin ready and unchecked auto reboot. I would do a full wipe before flash and after. Boot in recovery when you're done and wipe data cache and dalvik. Reboot and you should be golden.
Sent from my SGH-M919
mrzhadow said:
Yes get Odin ready and unchecked auto reboot. I would do a full wipe before flash and after. Boot in recovery when you're done and wipe data cache and dalvik. Reboot and you should be golden.
Sent from my SGH-M919
Click to expand...
Click to collapse
ok i will give it a shot, i hate factory resets, customizing un done
mrzhadow said:
Go here http://forum.xda-developers.com/showthread.php?t=2677252 and get either @ShinySide or @Fenny 4.4 package. Any other stock 4.4 package from Samsung is most likely buggy. I suggest 1 of these guys fixed packages for a bugless flash.
Sent from my SGH-M919
Click to expand...
Click to collapse
would this " M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED " actually be better to do than just the modem/nohls ?
wing-zero said:
would this " M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED " actually be better to do than just the modem/nohls ?
Click to expand...
Click to collapse
If you already tried the modem only and it didn't work then yes.
Sent from my SGH-M919
mrzhadow said:
If you already tried the modem only and it didn't work then yes.
Sent from my SGH-M919
Click to expand...
Click to collapse
how would i know 100% if it is working correctly?
wing-zero said:
how would i know 100% if it is working correctly?
Click to expand...
Click to collapse
Your signal would be working if it was successful.
Sent from my SGH-M919

Categories

Resources