So I've come a long way to get to where I am now. I tried to install AOKP or PACman but was lost in a boot loop. I gave up and reflashed the Stock ROM and stayed with it for a while. A couple of days ago I decided to give it another go and reinstalled PACman. I found out about the OTA update and reflashing the previous radio. Did all of that and finally installed PACman and it works flawlessly.....well kinda. Here are the problems I've run into after a perfectly clean install:
Small problems:
* No lock screen
* Paranoid Android settings randomly don't apply after boot.
Bigger problems:
* Can not send more than 140 charcter texts without receiving network problems (any lower works fine)
* NO notifications. None. Zip. Nadda. I've tried changing the UI (Stock, Phablet, Tablet) to see if it would change in any of them. Didn't And notifications was ticked as on when I was in Tablet mode.
I'm not sure what to think about all of this. I have CM10 running on my Touchpad and it works flawlessly. Never had any sort of problem ever with it. But now with this ROM I'm getting screwed over.
Now needless to say, I have tried flashing AOKP the other day just see how it would do. The problem was that it was slow AND showed no notifications. So i should change having problems with the ROM to having problems with my phone.
So at this point I am open to any suggestions or input of any kind regarding this issues.
What carrier are you on? Sounds like your on someone else than vm. These ROMs are designed for VM but can be modified to work with cricket and all those other ones. What version of pacman u using? What kernel also?
Sent from my HTC One V+ (Because the X+ isn't as bamf as my V+)
If I helped you don't say thanks, click it!!
Tehwafflez said:
What carrier are you on? Sounds like your on someone else than vm. These ROMs are designed for VM but can be modified to work with cricket and all those other ones. What version of pacman u using? What kernel also?
Sent from my HTC One V+ (Because the X+ isn't as bamf as my V+)
If I helped you don't say thanks, click it!!
Click to expand...
Click to collapse
I am using Virigin Mobile. I am also using this pacman: http://forum.xda-developers.com/showthread.php?t=1948034
Okay, there is something definitely wrong here. I just tried to call my phone from a LAN line and nothing. I checked the call history and it shows up but does not notify me when I am being called. Tried to stay in the app while I called and still nothing. Tripping out now.
Try reflashing the ROM full wipe aka factory reset + dalvik. Although I'm pretty sure u did that. I have an old version of 19.3 that doesn't have the goo.im support which did give a lot of bugs. Ask in your face in his thread if he still has the DL link for that old version.
Sent from my HTC One V+ (Because the X+ isn't as bamf as my V+)
If I helped you don't say thanks, click it!!
Tehwafflez said:
Try reflashing the ROM full wipe aka factory reset + dalvik. Although I'm pretty sure u did that. I have an old version of 19.3 that doesn't have the goo.im support which did give a lot of bugs. Ask in your face in his thread if he still has the DL link for that old version.
Sent from my HTC One V+ (Because the X+ isn't as bamf as my V+)
If I helped you don't say thanks, click it!!
Click to expand...
Click to collapse
Yeah, I've flashed the same rom multiple times after a clean wipe (factory + caches) using TWRP. Also tried miltiple roms with multiple kernels. After backing up my SMS I'll give it another go and report back here. I hate it when people figure stuff out and don't post how they do it.
Do you think IYF will even respond? That thread is aging much no?
For those of you who will soon be cursed with the HTC One V like I have, here is my solution:
I used the Port ROM of Provisions: http://forum.xda-developers.com/showthread.php?t=2098618
Make sure to use the Gapps linked to in the thread or else the keyboard will screw up and you will have to flash everything all over again.
Notifications now work, along with calls, I havent gotten around to try texts yet but i'm sure it works.
I sounds like you may want to retry the install. My hov running pacman has no issues. And I mean none. Make sure you wipe everything. I wipe system, then factory reset, then cache and dalvik. Then flash ROM, then kernel, boot then flash gaps. I also use twrp. And I am all good
Sent from my HTC One V using xda premium
Related
I'm not entirely sure where this topic would go, but I have figured out how to get wildchild 2.0 and 3.3 up and running on the VM WFS. It might work for other CDMA Wildfires, but I'm not sure. I figured it out after reading a post by 'threefootsmurf' who said he got it working. I'm just making a tutorial on how to install it and get it running fully without problems, since I had a few problems, and to show that we have a great rom for CDMA phones. Oh and these steps are pretty straightforward, but I left out things like backing up everything since you should be in the habit of it already.
1. Download the wildchild file. Either 3.3 or 2.0, I have found that the odex version for 2.0 and the deodex for 3.3 tend to work better than the other..
2. Download the 'Hensemod' VM patch.
3. Put them on the root of you micro sd.
4. Boot to recovery and factory reset and wipe dalvik
5. Flash the wildchild ROM.
6. Boot the phone and go through everything, you will probably get error messages and the phone may shut off and power back on, but your main goal is to get to the home screen after doing the google setup and everything.
7. Reboot back into recovery and do a factory reset and dalvik wipe again.
8. Flash the hensemod VM Patch. (You may need to reflash the rom again and then the VM patch in one go here, it all depends)
9. Boot the phone and go through the google set up and everything again, and the phone should be in working order.
Those were the exact steps I used. I tested multiple ways to do it, some gave me bootloops, some stayed on the HTC splash screen, and some kept rebooting the phone. I like the wildchild ROM and this tut will open up the wonderful rom for VM and possibly all other CDMA users. I hope this helped you guys.
Wildchild 3.3: http://forum.xda-developers.com/showthread.php?t=1842771
Wildchild 2.0: http://forum.xda-developers.com/showthread.php?t=1652973
Hensmod: http://forum.xda-developers.com/showthread.php?t=1434497
thanks for the shout out.
yeah not sure why exactly but i usually need to flash the keyboard add-on to get any keyboard function. and the flashing of the rom on official CWM for marvelc seems to have its issues like deodexed don't like to load right or boot loops. after i switched to the unofficial CWM touch recovery for our phones not an issue at all loading after flash. and i usually flash it all at one time. if anyone has the same CWM as me, to do a data/cache reset select it then press vol up 5 times and you are on yes even though you can not see the option, press power and let it finish its wipe. definitely a great fast rom. found some new tricks i wasn't to test so might go back up to 3.3 soon for the extra speed boosts, only thing holding me back is i don't want to spend a whole night restoring my apps backups again lol.
love experimenting with this little thing though even if i am slightly noob to droid
I advise you to post tutorials like this in the General section
threefootsmurf said:
thanks for the shout out.
yeah not sure why exactly but i usually need to flash the keyboard add-on to get any keyboard function. and the flashing of the rom on official CWM for marvelc seems to have its issues like deodexed don't like to load right or boot loops. after i switched to the unofficial CWM touch recovery for our phones not an issue at all loading after flash. and i usually flash it all at one time. if anyone has the same CWM as me, to do a data/cache reset select it then press vol up 5 times and you are on yes even though you can not see the option, press power and let it finish its wipe. definitely a great fast rom. found some new tricks i wasn't to test so might go back up to 3.3 soon for the extra speed boosts, only thing holding me back is i don't want to spend a whole night restoring my apps backups again lol.
love experimenting with this little thing though even if i am slightly noob to droid
Click to expand...
Click to collapse
I know what you mean I'm a pretty big noob at this stuff too, but it's fun thinking I have some kind of involvement in something. I'm using WC 2.0 right now since I can't get 3.3 to load on the odexed version with wifi and data working. I gotta edit my post. I got the deodexed version running, but it's got bugs, like FB wont work, and a few apps wont work right either, and of course no A2SD support... Lame. And I tried flashing all at the same time. But i'd get bootloops with 2.0. So I had to do it the way I described. Not sure if it's my phone my recovery or what. But yeah....
THANKS
This should be stickied for marvelc.
Thank's wc running great on marvelc.
Sent from my HTC_A510c using xda app-developers app
I just flashed WildChild 3.3 to my VMUSA Wildfire S last night. Here is my experience so far:
Definitely install WC and the VM patch right on top of each other in one shot
Skip the keyboard tutorial in the setup
If you get to the wifi setup and yours isn't listed, you need to wipe/reset/clear dalvik and install both files again or you're gonna have a bad time
I've got video playback problems. Videos I record playback with horizontal matrix green crap, and videos in the YouTube app give me audio only
Opinion: There are a few things I don't like about WildChild which are causing me to abandon it after 24 hours. The video issue is unacceptable, and a bunch of strange app choices make this not much better than the crap apps that come with HTC/VM Sense to begin with. Stock browser is absent in favor of Dolphin, no Google Talk app, no default Calendar, required use of Startup Manager (Free) which I feel is pretty useless to me, and a whole list of other apps (like a dozen) I am too lazy to deal with. I realize what I am looking for is a barebones setup, and I'm going to look for it starting now.
Thanks for this post. I've been running Wildchild 2.0 for a few months now. The video issue mentioned above comes & goes with certain app installations - oddly enough a reinstall of the youtube app usually clears it up on my WFS.
I recently have spent a decent amount of time trying to get my inc2 to boot JB without extreme lag(maxed out CPU). I've ran JB quite a few times until one day I overclocked to 1.5GHz and my phone boot looped and could never get JB or ICS to run properly. Its been reported that over clocking over 1.3GHz can break the partition on your phone and even lose root. If u have similar problems this is what I did -
Put the stock ruu GB 2.3.4 on the root SD card as pg32img.zip
Boot into boot loader and click vol up to accept update.
you are now on the latest stock gb without root but s-off will b preserved
download super one click and htc drivers to gain root.
reboot
I flashed twrp thru goo manager cuz that it's what I prefer. Wipe and flashed dkstunna's build 3 with 4.2 gapps and boom BACK TO FAST JB in under 30 min.
hope this helps someone! hit thanks if it did
next I hope to help on the main thread one day, Ive flashed almost every ics jb Rom and would luv to help
Sent from an incredibly running JB inc2
Can anyone verify this works? Not that I doubt you OP, just wondering if this has worked for anyone else?
Quick question.
I have been rooted for so long I've almost forgotten how it is done but I don't remember Super One Click supporting the DInc2. Does this mean it does root 2.3.4?
yes super one click works for inc2, and yes it will root 2.3.4. s off is the hard part on 2.3.4 if ur not already, so be s-off. I'm sure this will work differently for everyone cuz god knows why ics jb stopped working right in the first place. I bet kernel source would fix this too...
Well,
Tried it, and it didn't do the trick.
Still no JB for me.
Frustrating!
I'm running PA for months now and it hasn't locked up or lagged. I came from Venom before. I wiped everything except SD card, installed CM10 10/3, booted, flash PA, booted, flashed gapps and kernel. It booted up just fine for me.
I also flashed the firmware in the Venom thread. I don't use v6supercharger, 1024MHz smartassv2, and I undervolt -50.
TheAtheistReverend said:
Well,
Tried it, and it didn't do the trick.
Still no JB for me.
Frustrating!
Click to expand...
Click to collapse
I was in a bit of a panic cause i was using viper, went to aeroevans 11/13 jb, it worked for about 6 hours and then the massive lag and boot loops started. I couldn't flash any ics/jb aosp rom, I tried mimicry, dkstunna, and aeroevean's cm9/10. all non usable, crazy lag and boot loops. viper seemed to flash fine though.
I did try the solution in this thread and it didn't seem to work so I reflashed viper formatting using aroma. I let it boot and settle. then i formated all partitions in 4ext and reinstalled viper without formatting in aroma and i let it boot and settle, finally i reformatted all partitions in 4ext, installed aeroevan's 11/13 with latest jb gapps and all has been great for the past few days. fingers crossed.
I have tried just about everything. I can't think of anything else to try. I wish we knew why some phones were doing this.
The first thing I remember not going as usual on my phone was MIUI was not installing properly. It would hang on "updating boot" during install. I couldn't for the life of me get it any farther than that. The next thing was a JB NAND wouldn't boot properly, and then it was all down hill.
Back on the same bull**** of bootlooping on cm10. There should be a warning on the viper thread to not install it if you ever want to use another rom.
I don't know why but I'm not having any problems after viper...
I'm so fresh you can suck my nits...
None of us know the answer and that's the only common denominator. I'm just lucky that Miui works or i'd be sol
Uhh so yeah, tried this and it didn't work. Never had any problems with the phone before I got rid of ViperInc. I was on the latest firmware, every ROM flash was a totally clean one, followed the instructions in the OP and CM10 Global is just sitting here bootlooping. I know the dev isn't responsible for what happens to our phones, but multiple cases of the same seemingly unsolvable problem says there's something wrong with that ROM, imho. ****ing bogus.
Does anyone know if.the devs will try n make a fix or maybe implement one in the next build?
Sent from my HTC Droid Incredible 2 using xda app-developers app
chillybean said:
Does anyone know if.the devs will try n make a fix or maybe implement one in the next build?
Sent from my HTC Droid Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
It's not the cm10 devs' problem
Didn't say it was cm10s dev problem its the viper dev problem ..its an awesome.Rom but when some problem as bad as this with many ppl affected ..in my opinion I think the team should at least help ..when ppl start seeing this they aren't gonna want to flash this Rom...then there would be no point in developing it unless for the ppl that WANT to stay on sense...all I asked was if the team was aware n if they plan on a fix or a disclaimer that this Rom may poison your phone so it does happen to anyone else ..no need to be a smartassv2 lol I'm just asking and I'm sure a lot of ppl are too
Sent from my HTC Droid Incredible 2 using xda app-developers app
after getting JB to work for awhile I decided to flash the .312 radio, booted and 5 min later I get jelly beans to the face... now I'm stuck on viper again. I tried multiple times to recreate whatever fixed it the first time and I get nothing. I remember reading somewhere awhile back that going stock s-on then going s-off root might solve the problem
chillybean said:
Didn't say it was cm10s dev problem its the viper dev problem ..its an awesome.Rom but when some problem as bad as this with many ppl affected ..in my opinion I think the team should at least help ..when ppl start seeing this they aren't gonna want to flash this Rom...then there would be no point in developing it unless for the ppl that WANT to stay on sense...all I asked was if the team was aware n if they plan on a fix or a disclaimer that this Rom may poison your phone so it does happen to anyone else ..no need to be a smartassv2 lol I'm just asking and I'm sure a lot of ppl are too
Sent from my HTC Droid Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
I don't think it is ViperROM dev's problem, nor is their responsibility to help. They make it very clear they hold no responsibility for what happens to your device when you flash their ROM. They are also not making any money from the free rom they put out for us to enjoy, so their is no driving force really behind their desire for "fans" if you will.
That being said, it would be nice if they could help and did. Has anyone directly, and nicely asked Nitsuj or any of the Viper team for help?
fen0m said:
after getting JB to work for awhile I decided to flash the .312 radio, booted and 5 min later I get jelly beans to the face... now I'm stuck on viper again. I tried multiple times to recreate whatever fixed it the first time and I get nothing. I remember reading somewhere awhile back that going stock s-on then going s-off root might solve the problem
Click to expand...
Click to collapse
Doubt it. I went all the way except for S-off and re-rooted but it still will not load any JB rom I try. But by all means, it might be worth trying if you're so motivated. Seems like some things work for some, but not for others at this point.
Just got back onto CM10. Was on Viper, did full wipe x2, formatted partitions to ext3 in 4ext Recovery, fix permissions, then formatted cache.
Then...here's the weird part....since Mimicry was the only non GB Rom I could get to at least boot, I tried a clean flash of it. Used only the baseline items in the Aroma installer (only things I installed were the jb animations, trebuchet, v6, and daemon). Booted into Mimicry and let it settle without signing in to Google. Profit!
Next phase was a full wipe x2, flash newest CM10, flash GApps, then format cache.....double profit! Hopefully this will hold up. Will report back once its had time to fully settle.
Sent from my Incredible 2 using xda premium
Sry didn't mean to say it like that but I know its not their responsibility..I just asked if they try to figure this out..I'm gonna try this mimicry method...I hope I profit like twice
Sent from my HTC Droid Incredible 2 using xda app-developers app
I wouldn't call it a method really....I think I may have just gotten lucky
Sent from my Incredible 2 using xda premium
Hi.
I installed a custom ROM (CM10) yesterday but ever since then, when the screen is turned off, it will restart after about 1 minute. If I try to turn the screen on again before 1 min, it'll restart. In other words, when it goes to sleep, restart will be required. Please help me on solving this issue. I searched a lot and I thought maybe it has to do with the maximum CPU frequency, I tried changing it but didn't help.
Any ideas on how to solve this problem?
What did you wipe during the install? And what ROM did you install?
Probably to start the best thing to do is redownload the rom, do a full wipe (cache, davlik cache, data, and system), then reflash the rom.
RE
Romman0 said:
What did you wipe during the install? And what ROM did you install?
Probably to start the best thing to do is redownload the rom, do a full wipe (cache, davlik cache, data, and system), then reflash the rom.
Click to expand...
Click to collapse
Thank you for the response.
Yes I did wipe the tablet (a full wipe as you mentioned) before flashing the ROM.
First I had tried Jellytime Sosei and when I realized the problem, I tried "Build 4 Linaro Stock" from this post but still the problem exists :/ Before installing the first ROM, I had done a full wipe, but not for the second one.
Thanks again for helping me.
Try a full wipe to build 1 from the sosei thread, build 1 or 2 from the linaro thread, or the original cm10 thread. Those were the most stable for me. It's a weird issue, so it's probably a bad download or flash issue.
Its screaming bad install or bad settings, wipe twice then flash again, make sure to change nothing for speed, governor, io scheduler, and stock included kernel.
Don't even install an app for OC. It may be a huge bug showing for the first time, if we go carefully we'll find it, or get it going properly again. Occasionally the blackhole wipe used can clear up flash issues, but wipes internal sd as well.
Tapatalked from my HTC DNA
Thank you guys. I'll try what you said when I get home.
Romman0 said:
Try a full wipe to build 1 from the sosei thread, build 1 or 2 from the linaro thread, or the original cm10 thread. Those were the most stable for me. It's a weird issue, so it's probably a bad download or flash issue.
Click to expand...
Click to collapse
I'm gonna give those three that you said a try, when I get home. But, can you give me the link of the original CM10 thread that you're saying? I thought there isn't one for A100, since I didn't find it on their website. Is there a official CM10 ROM for A100?
There is no Official CM10 for the A100, Romman was referring to this link for the original CM10: http://forum.xda-developers.com/showthread.php?t=1792634
OK, after wiping everything twice and also wiping internal SD, I flashed "Build 2" from CM10 Unofficial Builds thread. Apparently this one doesn't have that bug and everything is fine, but the problem is that it's buggy and clock doesn't show well and when you press recent apps button, the overlay doesn't cover the bottom of the screen. So, I'm gonna try and flash Build 1 or maybe newer Builds and see what I get.
But is there a work around for the clock and other bugs problem in Build 2?
aminbandali said:
OK, after wiping everything twice and also wiping internal SD, I flashed "Build 2" from CM10 Unofficial Builds thread. Apparently this one doesn't have that bug and everything is fine, but the problem is that it's buggy and clock doesn't show well and when you press recent apps button, the overlay doesn't cover the bottom of the screen. So, I'm gonna try and flash Build 1 or maybe newer Builds and see what I get.
But is there a work around for the clock and other bugs problem in Build 2?
Click to expand...
Click to collapse
There isn't one, no, but it was corrected in B4. I think. I'm building this stuff without the device so I can only go by reports. You're reporting issues that no one else has, is your device functional otherwise? Like is it ok on a stock Rom? Using the correct gapps, any other changes or mods?
Tapatalked from my HTC DNA
pio_masaki said:
There isn't one, no, but it was corrected in B4. I think. I'm building this stuff without the device so I can only go by reports. You're reporting issues that no one else has, is your device functional otherwise? Like is it ok on a stock Rom? Using the correct gapps, any other changes or mods?
Tapatalked from my HTC DNA
Click to expand...
Click to collapse
It was totally OK on the stock ROM and this never had happened, not even once.
I'm using the gapps that I got from your CM10 ROMs thread, which is apps for v 4.1.2. I haven't changed ANYTHING else in the tablet, no mods or customization at all... :/
P.S. I tried Build 4 again, this time I fully wiped everything before flashing, but again, the bug still exists. gonna try some other guys' ROM to see if the problem is with this ROM or it's from my device.
aminbandali said:
It was totally OK on the stock ROM and this never had happened, not even once.
I'm using the gapps that I got from your CM10 ROMs thread, which is apps for v 4.1.2. I haven't changed ANYTHING else in the tablet, no mods or customization at all... :/
P.S. I tried Build 4 again, this time I fully wiped everything before flashing, but again, the bug still exists. gonna try some other guys' ROM to see if the problem is with this ROM or it's from my device.
Click to expand...
Click to collapse
If its fine on stock then its gonna be Rom or kernel, just never heard of this happening before. What governor did you use?
Tapatalked from my HTC DNA
Hi, I've got an HTC One V that's stuck in a bootloop with almost any ROM I've tried installing. Bootloader and CWM are working although CWM seems to have an issue with sd_ext during wipe (i've been doing it manually and thru the factory reset in bootloader). After rooting, I installed AOKP 4.1.2 and it ran smoothly, so I decided to unlock the carrier. Then I got Paranoid 4.2.1 to work, but with a serious keyboard bug, so I decided to try P4.2.2 and that didn't work...bootloop. Since then...no dice. I've tried many different custom roms, with some boot.img's get me stuck on the HTC legal screen while others will get me to optimizing and then starting apps...but no further. Although, My_Sense v3.0 works and puts things back to stock, my suspicions are that the aroma installer my be the key...but I cannot seem to retro-engineer it into a custom ROM. Is this the way or am I completely backwards? Someone please help. Thank-you
P.S. Admins - love the video at register page
Ok, figured it out. Had to flash kernel with Hellboy boot.img and got paranoid 4.1.2 running. Does anyone know if there is any working 4.2 roms for htc one v? I can't get Packman to work. Thanks
quigi said:
Ok, figured it out. Had to flash kernel with Hellboy boot.img and got paranoid 4.1.2 running. Does anyone know if there is any working 4.2 roms for htc one v? I can't get Packman to work. Thanks
Click to expand...
Click to collapse
Paranoid android worx but there is still bugs so dont go complaining abt em in the thread
Good Day!
Hi guys, i swear i searched! for like days! i still haven't found out how to solve this issue. problem started when i tried hellybean a few weeks back, and then i heard someone on the thread said to try and use the latest beta uber kernel at the time, and i did. What end up happening was that my hardware keys are dead, the lights still works but very dim, i think this is because of the swipe to wake thing where it leaves your hardware keys on 24/7 as long as the phone is on, which is not that bad because i'm now used to using the nav bar. but the real problem is that now every time I install a rom that is not JB 4.1 (haven't tried 4.2 though) i.e. 4.3, 4.3.1, it gets stuck at the app optimization screen, it would go about half way through optimizing the apps, and then just reboots itself, and it'll do that over and over, like boot loop but it can actually go into the rom. So i think this is not as bad as a situation as soft bricking or hard brick, but i just really don't know what the heck is going on to even try and fix it. I've tried odin, thinking that there may be something wrong in the boot file, nada, factory reset, nada, the only thing that worked was installing the 4.1 roms, i think it is because the 4.1 roms don't require app optimization.
If anything maybe anyone out there can help me find a way to disable app optimization? maybe that'll let me get into the rom.
btw, i dont really mind using 4.1, but i really want to try the jedi rom, but having my hardware buttons dead and jedi rom being TW and it doesn't seem to have a nav bar make it impossible for me to use the rom, so i've only been able to use cyanogen 4.1, which are great but they are pretty outdated, so if there are anyway to fix that, lmk too.
Anyways, any help would be appreciated thanks a ton guys! sry for essay!
have you used the infamous cache wipe? http://forum.xda-developers.com/showthread.php?t=2235141 try this and it should fix your issues its because your going from AOSP/AOKP to TW they dont like each other lol follow those instructions and you should be good. also what recovery are you using to flash these?
krazierokz said:
have you used the infamous cache wipe? http://forum.xda-developers.com/showthread.php?t=2235141 try this and it should fix your issues its because your going from AOSP/AOKP to TW they dont like each other lol follow those instructions and you should be good. also what recovery are you using to flash these?
Click to expand...
Click to collapse
Lol actually the problem started when I was on 4.3, and then upgraded to 4.3.1 helly bean, in which i tried to use the beta uber kernel, that was when the problem started. So the only roms that allows me to get pass the optimization screen were the 4.1.2 roms, which were TW, pananroid, like i tried a bunch, like super old ones, they all worked, just that when i try to get any rom higher than 4.1.2, it keep going back to that. And yeah when i tried to upgrade from jedi to aosp, to tried using infamous cache and it didnt work :/ because i've heard that's what would fix it... and lastly, Im using twrp 6.1 i think, not the latest one.
Thanks alot for the reply!
PS. I see you running slimbean 4.2.2, how is it? any probs? maybe i can try a 4.2.2 if this doesn't work out, i havn't been able to get any 4.2.2 roms cause the links are all dead, so idk if i'll have problems with 4.2.2. if there's anyway you can link it for me that'll be great! thanks!
PSS: also i've tried odin, but idk if that actually wipes everything, i'm having a feeling that it might be a script problem or something because it goes into the rom once, but it just refused to work and after like 10 seconds it reboots.
quick question are you trying to restore 4.1/4.2 apps on your 4.3 ? apps dont play nice like that sometimes .. also your not restoring any system apps are you? Personally i love all the ROMs/Mods the devs put out for us but im one who likes it really stable with very few bugs so i like to stick with stable ROM's so thats why im still on 4.2.2 its nearly perfect no issues here brother . When you flash the rom what are your actual steps in detail please from the time you boot into recovery until you finish so i can get a better idea here
krazierokz said:
quick question are you trying to restore 4.1/4.2 apps on your 4.3 ? apps dont play nice like that sometimes .. also your not restoring any system apps are you? Personally i love all the ROMs/Mods the devs put out for us but im one who likes it really stable with very few bugs so i like to stick with stable ROM's so thats why im still on 4.2.2 its nearly perfect no issues here brother . When you flash the rom what are your actual steps in detail please from the time you boot into recovery until you finish so i can get a better idea here
Click to expand...
Click to collapse
Ey thanks for the reply, ok so first, I did not try to restore any apps or system apps, I even odin so everything were wiped cleaned. So really dont know whats going on. After I updated to a newer hellybean, not newest by now, and a beta uber kernel, this happens. I see two other people having the same problem too. Also I tried to use 4.2.2 roms, did not work
Anyways any insight would be apreciated!
Thanks!
One more thing, I tried twrp 2.6.1.0 to flash as reccomended by all devs and still no results. :/
Damn sorry brother that's pretty frustrating try dirty flashing helly bean and just wipe dalvik and cache and see if using the stock kernel helps first then see what happens :banghead:
sent from my t mobile S4
krazierokz said:
Damn sorry brother that's pretty frustrating try dirty flashing helly bean and just wipe dalvik and cache and see if using the stock kernel helps first then see what happens :banghead:
sent from my t mobile S4
Click to expand...
Click to collapse
oh well, thanks for the reply then, im trying 4.4, hopefully it'll help... somehow... lmao idk haha