Related
Basic concepts, how-to'sThis thread is a work in progress. If you would like to contribute information or have ideas for what should be added please PM me.
Disclaimer "just because i am trying to be helpful does not make me responsible for anything that you do to your phone. playing with any of this stuff could destroy your phone"
I am not a dev, but I have been flashing on Samsung phones since the international S2 came out. I also spend a ton of time reading the forums and researching what I don't know. I would like to give back to the community in some way and I hope that this post can help the noobs not brick their devices, as well as keep them from being overly annoying to the members and developers here by posting in the wrong places and asking dumb questions.
Some basic rules if you are a noob and don't want to turn your phone into a brick.
1. be patient. don't be the first or even the tenth person to flash anything. wait until you see others using whatever Rom or kernel with success.
2. If you have any doubts about what you are doing, read more. don't flash.
3. make sure you are in the forum for your device, not some similar or related device.
Some basic rules for these forums
1. If you have a question, the first thing to do is look it up yourself. that means searching the forums first, then searching Google.
2. If after searching you can't find an answer, then post in the q&a forum
3. don't report bugs unless you are using an intact version of whatever Rom, if you have changed kernels, installed a ton of apps etc it probably isn't a bug, it's a bad combo or its you.
4. don't report bugs unless you are 150% sure that no one has reported it yet.
5. if you report a bug, make sure you can duplicate it first, then get a logcat of the problem so you can help (see below for logcat info)
Why flash?
by flashing your device you can make your phone act differently, look different, and enable new or disabled options. you could ,for example:
enable native tethering
enable call recording
change the look of your phone
add custom toggle buttons
overclock or undervolt
increase battery life
etc..
Kernel vs Rom vs Recovery vs Modem
Kernel is the layer between the phone hardware and the rom. it controls things like Wi-Fi power, touch sensitivity, possible range of screen brightness, phone logging, and processor max and min speed. kernel must be designed not only for your device but also for the type of rom you are using (Sammy rom or Aosp) some kernels support all roms, others are specific.
Rom is the operating system of your phone. there are three main categories of roms.
roms that are based off of the Samsung stock rom (Sammy rom)
roms that are based off of Android open source project aka AOSP (AOSP, AOKP)
roms based off of the miui project (these used to be a branch of AOSP but recently they have also used Sammy base for miui)
recovery is a partition that you can access at boot by holding down a combination of keys. (volume up and home button in the case of our sgs3) every phone has recovery stock but it doesn't do much. you can replace stock with clockwork mod recovery which is extremely useful for flashing all kinds of things and making backups before you do. There are other alternative recoveries besides clockwork but that seems to be the most common. TWRP is also gaining popularity these days, especially on the sgs3. You can easily switch between recoveries and or upgrade your current recovery. All that needs to happen is for a new image to be flashed onto the recovery partition. See the rooting guide for more info on how to flash a custom recovery.
modem is a file that controls the cell radio of the phone. helps determine what frequencies to use and settings for a particular network. It is important when flashing a radio that you flash a radio that is for the AT&T sgs3 as flashing the radio from another carrier has been known to cause problems with the IMEI
Methods for flashing files - Odin vs mobile Odin vs. clockworkmod(cwm) vs adb
Odin is the internal Samsung tool for flashing. I believe it only exists on Windows platform. This tool is mostly used to initially flash an insecure kernel or rooted kernel, OR to return to completely stock rom. This tool can effect your flash counter (see below). Files for flashing in odin generally should end in .tar or .tar.md5 although sometimes they come zipped and the tar is inside the zip. Read more about Odin before using it as it can easily break your phone. !!!as a general rule make sure you never check the "partition" checkbox EVER!!!
Mobile Odin is a phone based version of Odin made by the very talented developer Chainfire. It can be installed on a rooted phone and used to flash the same .tar based files as the desktop version. Mobile odin has a few advantages. 1 you can use it from your phone. 2 it does NOT effect the flash counter on your phone, 3 it can auto root a stock rom (nice if you want to try out a brand new update that has not been rooted yet)
clockworkmod(cwm) is recovery based tool that can make backups of your entire phone, flash new roms, kernels etc.., and do many other useful tasks. Once you have this on your phone my guess is that most of your flashing will be done through this tool. The files for flashing through clockworkmod are .zip files. Clockworkmod will NOT effect your flash counter.
ADB is the android develpment bridge. It allows for command line interface with your phone through it's debugging options. ADB can do most anything as I understand it. In my several years of flashing I have only had to use it once, and i could have waited for someone to come up with another solution. In general as a noob i recommend you stay away from ADB.
open source vs Samsung based roms vs miui
Open Source Roms such as AOSP/AOKP are built using Google's open source android code as a base. The developers then add functionality specific to the device. The advantages of these builds are that they often have tons of options built in to the rom that change the behavior and look of the phone. They usually allow you to change the toggles in your notification pull down, change the battery display, make all kinds of adjustments to sounds, vibration etc... Some people also prefer the "vanilla" android look and feel. These roms often provide "bleeding edge" concepts, design, and modifications. The Disadvantages of these roms is that some of the hardware coding is done closed source by the phone manufacturers, which means that things like bluetooth, camera, video recording, and MHL video out often don't work or take much longer to get working by the developers. Basically anything that relies on the Samsung framework will not work in an open source build. This means Svoice, Snote, and the Samsung camera app will not work.
Samsung based roms are taken from the Samsung original phone software and modified by the developer. Usually, these roms are modified in order to be faster and to make changes to some of the features. Expect to see changes to the stock rom like: debloated (ATT and samsung software removed), de-odexed (explained later), enable tethering, unlimited sms recipients, added notification toggles, etc. Most of these changes are made to: make the phone faster, improve battery life, make the phone easier to theme. The advantage of these roms is that they still use the Samsung framework so all the proprietary stuff like camera, bluetooth, MHL still work, the disadvantage is that they will never be as customisable as open source roms.
MIUI is a rom that focuses on theming. Official MIUI (Chinese) gets updated weekly on Friday and then there are lots of miui developers who adapt it to other languanges and make some tweaks to it. MIUI can be built from AOSP source or Samsung source and depending will have different features. The first MIUI rom for our phone just appeared in these forums and it is based off of AOSP. MIUI has a unique look and is also highly customizable through theming. There are tons of themes available for download through the rom itself and you can mix and match any part of any theme you want. This includes icons, lockscreen style, etc.. Some people criticize while others praise MIUI for being very "iphone like". This is because the icons look more iphone like and there is no app drawer in the MIUI launcher. However, you can still use any launcher you like within MIUI.
odexed vs de-odexed
odexed is how the phone comes stock from Samsung. Odexed means that system files and apps are split into two pieces and kept in different places on the phone. This is done to speed things up a bit. However, it makes it harder to theme the phone because the apps are split up. Most custom roms choose to de-odex (basically regroup the files back into one) so that custom themers can make themes more easily for the phone.
download mode and recovery mode how to access
(Copied from mskip and his toolkit thread here: http://forum.xda-developers.com/showthread.php?t=1746665)
How to get into Download Mode (For Odin)
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
How to get into Recovery Mode
1. Unplug the USB cable.
2. Shut down the phone.
3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.
STEP BY STEP how to flash your phone for the first time
A. get root
first off, you need to gain access to the root of your phone. there are several ways to do this (thanks to all the talented devs).
I recommend using mrRobinson's method as it will not trip the flash counter on your phone.
1. you will need to have odin from here http://forum.xda-developers.com/showthread.php?t=1722686 remember to hit the thanks button, download and install odin.
2. Kies (on Windows, not on your phone), Samsung's sync program, can interfere with Odin. Either make sure Kies is closed and close it out of background processes using the task manager in windows...or better yet, uninstall it completely.3. make sure you have the proper samsung drivers installed. you can get the USB drivers directly from Samsung here: http://www.samsung.com/us/support/owners/product/SGH-I747MBBATT
4. you need to download the right image from mrRobinson's thread. to find out which one hit the menu key from your home screen, select system settings, select about phone at the bottom, and look for the build. it should be either UCALEM or UCALG1. Once you know, go to mrRobinson's thread here http://forum.xda-developers.com/showthread.php?t=1739426 download the matching image, and dont forget to thank him.
STEPS 5-7 COPIED FROM mrRobinson's THREAD
5. Extract the .tar file from the .7z file you just downloaded from the thread in step 46. Put your phone into download mode (see how above)
7. Start Odin, connect your phone to your PC, you should see the box under ID:COM change color to show your device is connected. click on PDA and select the .tar file you just extracted. Hit the start button and wait for the file to flash to your phone. When done your phone will reboot automatically. One word of warning about Odin: DO NOT TOUCH THE CHECKBOXES!!! WHATEVER YOU DO>>DONT TOUCH THE RE-PARTITION CHECKBOX!!!!B. installing clockworkmod
the next step is to get a working clockworkmod recovery on your phone instead of the default recovery. Again, there are many ways to do this and there are several different versions of CWM recovery available. I recommend using the one from Rom Manager as it seems to be compatible with most roms. Note that currently most versions of CWM can only see your internal SD card and not your external if you have one.
1. Go to the Google play store and download Rom Manager (https://play.google.com/store/apps/...anager&feature=nav_result#?t=W251bGwsMSwyLDNd)2. Open Rom Manager app, flash clockworkmod recovery (first option), choose the appropriate phone..in this case galaxy s3 att, grant it superuser privileges, it should say install successful. NOTE: some users have reported not seeing the S3 ATT in the list of devices in Rom Manager...this is a bug and hopefully will be fixed. It may be that you need the purchased version instead of the free version for it to work? Not sure why this is but if it gives you trouble there are other ways to flash a recovery image. The next easiest way once rooted is to use the tool in this thread: http://forum.xda-developers.com/showthread.php?t=1746665 from there you can flash both cwm or twrp whichever you prefer. Alternatively you could also use goo manager to flash TWRP link to goo here: https://play.google.com/store/apps/details?id=com.s0up.goomanager&hl=en
C. Test out your new recovery and make a backup of your phone
1. turn your phone off, then turn it back on while holding the Volume UP and home key. (more detailed instructions above) You should see Clockworkmod Recovery at the top.2. Use your volume keys to navigate to the backup option and select backup, then wait for it to complete. You now have a backup of your phone you can restore to at any time.
D. downloading and flashing a new rom
now its time to decide what rom to flash. when choosing a rom read the first post of the thread (the OP) carefully and take time to read through most if not all of the thread. At the very least go read the last 10 pages of the thread so you are familiar with any current issues people may be having. Once you have picked a rom:
1. Download the rom you want to try2. Make sure that the rom ends up on your internal SD card and that you know where it is3. Get into CWM recovery4. As a general rule it's a good idea to wipe data/ factory reset from CWM recovery (this will wipe all your data on the phone except any photos/videos you may have taken)5. It is also good practice to wipe cache from CWM recovery6. Lastly, from the advanced menu in CWM choose to wipe Dalvik cache7. now go back out to the main recovery screen and choose "install .zip from SD Card" option and navigate to your rom, select it and confirmnote that a new rom may take longer to boot the first time.
Flashing "dirty" vs flashing "clean"
Clean
Doing a clean install of a rom means erasing or formatting all the data from the previous rom before you flash the new one. This is the prefered way to flash a rom to ensure that it will run smoothly. It is necessary if you are switching from one rom type to another (CM to Samsung base). In order to do a clean flash you need to boot into recovery and select the following options: wipe user data (this wipes all apps and personal data, but not your photos/videos), wipe cache, advanced>wipe dalvik cache, storage/mounts>format system. This will ensure that no trace of the former rom is left on the phone. Beware that at this point your phone will not boot until you install a new rom. I suggest using titanium backup to backup apps and smsbackup+ for texts to make getting your new rom configured easy.
Dirty
Doing a dirty install means just flashing a new rom right over the top of the old one without wiping any data. The advantage to this is that you don't lose any apps or account info. The disadvantage is that you open up the possibility for problems. Generally you only want to flash this way if you are upgrading a rom (CM10 nightly to the next nightly, or from one samsung based rom to another). If you decide to flash over the top and have any issues, you should not report bugs, but try flashing clean first.
backing up IMEI
There have been some issues with people losing their imei number when flashing roms. *It appears to be limited to the old imei software version 2 but the evidence is not yet conclusive. *If you lose your imei, you will not be able to connect properly to the data network. *Luckily some devs have figured out how to re-inject an imei number into our phone and get it working again. *It is certainly a good idea to back up your imei info before flashing just to be on the safe side. *There seems to be two main threads dealing with backing up and restoring your imei. *you can check them out here:
http://forum.xda-developers.com/showthread.php?t=1801997
http://forum.xda-developers.com/showthread.php?t=1804117
huge thanks go out to these devs for figuring this out!! as always make sure you thank them.
I have yet to try either of these methods out myself so if one seems much easier or clearer please let me know.
tethering (for stock Samsung based rom)
you can use a mod to enable wifi tethering from your phone to up to ten other devices and share your data connection. If you are running a custom rom you probably already have this enabled and don't need it. It is already included in any AOSP roms also.
Make sure that you use the version of the mod that is for your software version number (UCLEM or UCLG1 see beginning of rooting guide to figure out which one you are on).
The original mod for UCLEM is here: http://forum.xda-developers.com/showthread.php?t=1732262
The mod for UCLG1 is here: http://forum.xda-developers.com/showthread.php?t=1768826
The Flash Counter
The flash counter is an internal counter that ticks every time you install a non-samsung firmware through Odin. This allows Samsung or AT&T to see if the phone has been flashed with custom roms. custom recoveries such as Clockworkmod and TWRP as well as the mobile version of Odin DO NOT change the counter. Only flashing non-Samsung files through the desktop version of Odin does. You can see your flash counter when you enter download mode on your phone. Luckily, Chainfire has developed an app that allows this counter to be reset, so there is really little concern anymore about having the counter trip. If you do need to send your phone in for repairs, you will want to reset the counter and then flash an unmodified stock rom through odin to get your phone back to factory state.
Link to Chainfire's app through this post here: http://forum.xda-developers.com/showthread.php?t=1800878
Logcat
Logcat is a way to access the android system log for everything that is going on behind the scenes. This tool is used to help developers pinpoint problems in a rom. If you want to actually be helpful to a dev when reporting a bug, you should really learn to use this tool. I am no expert on logcat but you can find some good information in this post: http://forum.xda-developers.com/showthread.php?t=1726238
APN settings
This is the apn that comes on stock at&t phone. It allows you to connect to LTE as well as hspa+
Name: ATT PTA
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth: none
APN type: default,mms,supl,hipri
NOTES BELOW ARE COMING SECTIONS. Feel free to pm me questions you would like to see answered or suggestions for other info:
theming
unlocking sim
returning to stock
What info is stored in each area: system, data, cache etc...
Looks good.
Stuck
FNM
I now know more about Android OS! Thanks for the info.
Good thread! In your step by step guide I suggest you add installing adb and adb basics. IMO, this is essential for anyone flashing, has bailed me out of trouble on more than one occasion.
Sent from my SGH-I747M using XDA Premium HD app
MORE ! MORE ! Very nice work thanks, this is shedding some lights on the terms we see floating around
excellent information, much appreciated, so what is de-odexed and odexed? thanks again!!
I got my s3 when it first shipped, and soft bricked it a month later. Even if you do everything right, it can still mess up. So waiting for a USB jig to come in the mail since my homebrew jig didnt work or I hard bricked my phone... Be warned...
Very helpful thread, thanks a lot!
Thanks for this guide!! Very helpful. Coming from a very different phone, everything about the S3 is foreign to me! Could you maybe talk about backing up nv stuff and imei?? I know there's another thread that explains it, but, this being the noob helper, I think it'd be good for anyone new to this phone.
Thanks
Thank you for making this! I'm sure this will help a lot of people out. I've flashed quite a few times and having a guide like this is definitely helpful.
I sure hope I had this guide when I flashed for the first time a few days ago, but at the time you only had part 1 done and the guide had not been completed yet. Glad to see it finished and it'll definitely help out others.
mods
Thanks for all the invaluable info on flashing ROMs. I've been a BB user for years so Android is still new to me. I'm looking into rooting and trying out some custom roms, but I had a question. When it comes to Mods can you just add those individually?
I want to use Team Sonic's FreeGS3 Rom mainly due to it's Sony Bravia engine Mod and the Awesome Beats Mod (or at least when they get it working on apps other than Google Music). However, they don't have a fully supported Rom for AT&T just yet.
Trying to have the best of both worlds....I may just need to try out something else and wait for the full ATT version.
This is a great thread you've created OP. However, I'm a tad confused. You mention in the guide that Kies interferes with Odin and you say to close and close it out of the backround, but you also mention "better yet, uninstall it completely." One of the reasons I'm rooting my new phone is to be able to delete this bloatware. Are you implying this is possible without first rooting the phone?
Thanks a lot in advance, this is very helpful.
jroyjohnson said:
Thanks for all the invaluable info on flashing ROMs. I've been a BB user for years so Android is still new to me. I'm looking into rooting and trying out some custom roms, but I had a question. When it comes to Mods can you just add those individually?
I want to use Team Sonic's FreeGS3 Rom mainly due to it's Sony Bravia engine Mod and the Awesome Beats Mod (or at least when they get it working on apps other than Google Music). However, they don't have a fully supported Rom for AT&T just yet.
Trying to have the best of both worlds....I may just need to try out something else and wait for the full ATT version.
Click to expand...
Click to collapse
I would wait to flash any ROM that isn't specifically for your device. However you may be able to flash the mods you want like the bravia mod on top of an att ROM. You need to find the original post for the mods you want, and do some research to see what they require and if anyone has used them successfully. Be extra careful of mods written for the international version of the phone.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
omi__ said:
This is a great thread you've created OP. However, I'm a tad confused. You mention in the guide that Kies interferes with Odin and you say to close and close it out of the backround, but you also mention "better yet, uninstall it completely." One of the reasons I'm rooting my new phone is to be able to delete this bloatware. Are you implying this is possible without first rooting the phone?
Thanks a lot in advance, this is very helpful.
Click to expand...
Click to collapse
I can see why you are confused. I am referring to kies on your windows PC. (If you installed it at some point) Not the version that runs on the phone.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
OP, are you sure you can install CWM through ROM Manager after rooting? I remember trying to do this on my SGS2 last year and my phone soft bricked. Tried it twice, and still soft bricked.
Why not just use Robinson's method?
ComradeNF said:
OP, are you sure you can install CWM through ROM Manager after rooting? I remember trying to do this on my SGS2 last year and my phone soft bricked. Tried it twice, and still soft bricked.
Why not just use Robinson's method?
Click to expand...
Click to collapse
I tested it out myself and it works fine. I figured this was the easiest way to get it done and not have to get adb up and running. Also, the official cwm is supported by all the new roms like cm10 and some other recoveries have had issues flashing those roms.
Thanks for putting this together! Very Helpful!
One question, you say flash CWM , first in list choose Galaxy S3 ATT, when i open Rom Manager and choose Flash i don't have the S3 for a choice ?I have Galaxy Note, Skyrocket and T-Mobile Galaxy S2, no S3....
Cholerabob said:
One question, you say flash CWM , first in list choose Galaxy S3 ATT, when i open Rom Manager and choose Flash i don't have the S3 for a choice ?I have Galaxy Note, Skyrocket and T-Mobile Galaxy S2, no S3....
Click to expand...
Click to collapse
Try scrolling down the list
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Hello All,
aXcelio here…..
I'm new to the world of Android switched from the iPhone….(was and still am a loyal user of IOS devices for the better part of 5 years)…..but out of shear boredom, I made the decision to decided to make the switch and I for the most part could not be happier. In doing so I picked up a Galaxy Note II SGH-1317 (AT&T), I've updated the stock rom (I think that's what its called) to JellyBean 4.2.1……now I'm in a place where I want take advantage of some of the feature embedded in CM (it looks really cool)……
So a buddy of mine, who's been running with droid's for as long as I've been running IOS decided to give me a hand in getting my device rooted……we used an exploit called EXYNOS, and installed TWRP (again forgive me ignorance if I'm speaking out of term…I'm learning, or trying too), everything appears to be running without incident, (with the exception of my not being able to create any backup…as the system tells me that I don't have any free space)….get back to that in a lil bit.
Now….I scored the CM site as well as XDA, but haven't really been able to find what I'm looking for (some of which could be out of fear of destroying my device, and some of which is based on a lack of understanding….more I think though of destroying my device……..I should note that I completely understand that any of that any info I get here or there…..is as is, and without any guarantee.) So here I am reaching out to you folks for some guidance……..with that allow me to ask a couple of questions…..
In an effort to get a better understanding of what my buddy did…..I would like to go through the process of setting my device back to defaults (as if I just brought it home from the store) no root, no play apps that I've installed….(I can do that later, and I'm not overly concerned about losing anything) and re-root the device…..that being said, is there a way to that (set the device back to defaults)….I've seen one article using the stock firmware, (which I've downloaded) and another which states that I can do a factory reset which will unroot the device…(but not sure what approach to take or for that matter I should even worry about that)
The second thing I'm wondering about is this……most of what I've read regarding the install of CM is that I need clockwork recovery (or something along those lines) but I have TWRP…..if I opt to not reset the phone back to factory default and unroot (or find that I really don't need to move in that direction) can I install CM using TWRP?…..if I need clockwork, can I instal this over TWRP……or do I need to do something different?
a
The last thing I have (at least for right now) is this….assuming I can move forward with the install and configuration of CM, I wonder if any of you can provide a step by step guide on how I go about this on my particular device……I've seen this article well as this ones these however appear to be for version 10, of CM…but I see there is a 10.1……I read another article (but can't seem to find it now…which stated that it worked with my device and 10.1, with a link but all of the nighties….seemed to be specific to the Galaxy Note…..not the Note II…..and again I would much rather reach out to you guys for guidance prior to doing anything…..The last question I have is I see there is a version 7100 of my phone and then one that says something about LTE (but not specific version……) is the SGH-1317 an LTE device that is version agnostic (if you will)….in other words if I see a post for an LTE GNII is that speaking to my device or something else……
Thanks a lot……
aXcelio
If your all ready rooted why go back to stock?
You don't have to install CWM TWRP is fine as your main recovery.
don't install any ROM for the N7100, that is the non LTE version of the Note 2, it will brick your phone.
CM10 is Android 4.1.2 Jelly Bean. CM10.1 is 4.2 Jelly Bean.
Read the forums for the specific ROM it will give instructions on installing the ROM even if it mentions to use CWM, installing with TWRP is fine.
READ READ READ and have fun
I think i understand, you want to reset and do all this stuff on your phone yourself.
? You would would have to Odin your phone back. Either mobile Odin or one for pc. Pretty simple task once you get the files you need. Think that's right..
Edit: as the guy above me said either is fine. Just preference in what recovery to use. I would suggest to only use cmr based recovery as those seem to be more friendly with development programs and roms than the official by koush that you see in play store. I wouldn't even downloaded it.
Sent from my SGH-I317 using xda premium
nidnarb said:
I think i understand, you want to reset and do all this stuff on your phone yourself.
? You would would have to Odin your phone back. Either mobile Odin or one for pc. Pretty simple task once you get the files you need. Think that's right..
Edit: as the guy above me said either is fine. Just preference in what recovery to use. I would suggest to only use cmr based recovery as those seem to be more friendly with development programs and roms than the official by koush that you see in play store. I wouldn't even downloaded it.
Sent from my SGH-I317 using xda premium
Click to expand...
Click to collapse
PC Odin is more safe for the record
Here is a link to a post that breaks down the basics of starting from scratch, rooting and installing clockworkmod and then flashing a ROM. The instructions are in reply to a gentleman inquiring about the Jedi ROM but the instructions will be good for most other ROMs out there. Just check the installation instructions in the op of any rom to make sure there is not something else required for install.
http://forum.xda-developers.com/showthread.php?p=35726061
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Hello, Im new to all of this so please understand. Okay, I have a Sprint GS3, I rooted it using the toolbox thing it worked but I decided that I didnt want the root anymore. I loaded stock software and booted it up normal. The only problem now is my wifi isnt turning on. Ive searched page after page on google, ask and bing. I dont know what to do anymore. Im just about to just say screw it and give up. Any help will be much appreciated.
You Odin'd back to Stock, and now your WiFi is not working correctly ? Are you certain your connecting to your Router ? Did you check the Router to make sure it's working correctly ? Did you try to connect to the Router with another Device ?
If you still have a custom recovery installed, I'd say to just flash another rom. The toolbox kills your WiFi fir sine reason, which can only be fixed by flashing another kernel, and roms have the kernels built in so, you might as well kill two birds with one stone
You could just flash stock rooted though, no need to go full out custom
Wifi not turning on
What I mean is my phone's wifi wont turn on at all. How do I get everything back to normal like before I rooted it?
Brblank44 said:
What I mean is my phone's wifi wont turn on at all. How do I get everything back to normal like before I rooted it?
Click to expand...
Click to collapse
Ok, this method should work and do exactly what you wanted, but you'll still have root access.
Below, I have quoted a post I made a while back when trying to help someone out.
Down below I link to Freeza's stock Rom, which is what you want if you want the stock phone with root. The one you want to download is the DeOdex MD4 one:
DeOdex:
Sprint Touchwiz Jelly Bean 4.1.2 L710VPBMD4 | Mirror
MD5: 77262D9D6CF1A6AF30A8981A95A75D57
Click to expand...
Click to collapse
In step #4, the wipe system is very important. It's most likely that something in your /system folder is messing up your wifi. Just flashing a new Rom over might not fix it. I'd also wipe /data, 'cause a fresh wipe is much less likely to have issues.
Ok, let's start at the very beginning (it's a very good place to start).
Before we get started, I'm going to make the following assumptions:
You successfully rooted your phone through Odin.
You currently have a custom recovery (either TWRP or CWM).
You have a Rom you'd like to flash on either your internal storage or your SDcard (I'd recommend the SDcard, but that's your prerogative).
If either of the first two is not true, I'd recommend going back to the rooting guide and check out the videos on how to use Odin to gain root and a custom recovery.
If number 3 above is not true, download a ROM (nor someone new to flashing/custom Roms, I'd recommend Freeza's stock rooted Rom, as it's identical to stock TW, but just with Root). Once you download a Rom, check it's md5sum to verify that it's a good download. Copy the file to your SD card and get ready to flash (make sure you have decent battery life left, I try to keep at least 50% or more when flashing Roms, although it shouldn't take too long.
I'll give directions on how to flash a Rom below. The instructions will be for TWRP, but CWM has similar options/settings
Turn your phone completely off (hold down power for 3-5 seconds)
Boot your phone into recovery. Hold Up, Menu, and Power for a few seconds (until SAMSUNG appears on your screen and the phone vibrates)
Make a Nandroid backup. I can't emphasize this enough. In flashing, it's almost a certainty that one time, something will mess up. When that happens, you want to be able to restore a backup. In TWRP, just go into Backup Menu and choose where you want it (internal vs. External storage). It takes my phone a few (5-10) minutes to completely backup my data.
In TWRP, click the wipe button, then system. This will completely wipe the Rom from your phone. Doing this will allow you to get a "clean" install, without any settings or leftover files from your old Rom getting in the way. Instead, you could only wipe data (factory reset), which is good enough for most Roms. I'd still recommend a system wipe, though.
Also while in the Wipe menu, wipe Cache and Dalvik Cache.
Go back to the TWRP main menu.
Click Install, then find your Rom zip file (may have to switch from internal to external storage).
Let TWRP do it's thing.
If you're installing a TW-based Rom, chances are it had gapps already installed. If not, you should now flash the correct gapps package from goo.im. Make sure you're flashing the correct one, as if you don't, your google apps will force close upon use.
Reboot into system and give it time to boot (first boot sometimes takes a couple of minutes).
Set up your phone the way you like.
These should be the directions to follow whenever you flash a new Rom. Some Roms have the Aroma installer, so you'll have more options once you choose to flash the Rom zip, but those are typically easy to follow (and vary from Rom to Rom, so I won't be able to give you a good guide on that).
Hope this helps!
Click to expand...
Click to collapse
Brblank44 said:
What I mean is my phone's wifi wont turn on at all. How do I get everything back to normal like before I rooted it?
Click to expand...
Click to collapse
Yes. The toolbox kills your WiFi completely and you have to flash another rom to fix it. Flash stock rooted from freezas thread and you should be good to go.
CNexus said:
If you still have a custom recovery installed, I'd say to just flash another rom. The toolbox kills your WiFi fir sine reason, which can only be fixed by flashing another kernel, and roms have the kernels built in so, you might as well kill two birds with one stone
You could just flash stock rooted though, no need to go full out custom
Click to expand...
Click to collapse
Why do people use a toolbox on a phone that's so easy to root without it?
flastnoles11 said:
Why do people use a toolbox on a phone that's so easy to root without it?
Click to expand...
Click to collapse
When I first rooted my phone (back pre LJ7 days), I used it because I came from the EVO 4G, which was notoriously difficult to root (and which needed a toolkit). So when I came to the GS3, I figured it'd be the same way. Fortunately, the toolkit worked better back then and I didn't have an issue. Now that I've helped others use Odin (and have used it myself a number of times), I don't point to the toolkit anymore.
But my point is, sometimes people assume it's difficult, see a toolkit that is meant to make it easier and decide that's the way to go.
topherk said:
Ok, this method should work and do exactly what you wanted, but you'll still have root access.
Below, I have quoted a post I made a while back when trying to help someone out.
Down below I link to Freeza's stock Rom, which is what you want if you want the stock phone with root. The one you want to download is the DeOdex MD4 one:
In step #4, the wipe system is very important. It's most likely that something in your /system folder is messing up your wifi. Just flashing a new Rom over might not fix it. I'd also wipe /data, 'cause a fresh wipe is much less likely to have issues.
Click to expand...
Click to collapse
Thank you very much. I will try this as soon as I can.
topherk said:
When I first rooted my phone (back pre LJ7 days), I used it because I came from the EVO 4G, which was notoriously difficult to root (and which needed a toolkit). So when I came to the GS3, I figured it'd be the same way. Fortunately, the toolkit worked better back then and I didn't have an issue. Now that I've helped others use Odin (and have used it myself a number of times), I don't point to the toolkit anymore.
But my point is, sometimes people assume it's difficult, see a toolkit that is meant to make it easier and decide that's the way to go.
Click to expand...
Click to collapse
I get that, but just a tiny bit of reading around well show you the toolkit is actually the harder way to root this phone in my opinion... Just saying
flastnoles11 said:
I get that, but just a tiny bit of reading around well show you the toolkit is actually the harder way to root this phone in my opinion... Just saying
Click to expand...
Click to collapse
I totally agree that the toolkit is much more complicated and a bit of a "black box." Hence why I don't recommend it anymore.
But back then, even though I read a whole lot, I decided to go with the toolkit because it felt safer. Heck, I eevn donated so I could get the "pro" features! And for people who aren't that comfortable "hacking" things, it's tempting to use something that'll do the "hard work" for you, even if the normal way of doing it is relatively simple.
That's why I always try to spell things out very clearly for people (I do like numbered lists, don't I?). If someone responds to a thread with "just wipe data and flash a new rom," most "noobs" will hesitate because while they may know those terms, they don't know the procedure and will be afraid of messing it up. With the numbered list of instructions, they typically feel much more comfortable with doing it themselves.
Just my two cents.
Yeah, very true (@topherk). The first time I rooted my firdt phone, I saw all the guides and stuff, but settled on a toolkit sort of program to do it for me...subsequent phones I've always rooted by hand. For me it kinda sucks that there's no way to root the S3 manually (as in like, push this to.the phone, reboot, run this command then flash recovery)
Having come from 2 HTC devices (evo and evo shift), I kinda feel like ODIN is a "cheating" way to root lol. But that's just me.
Whats a md5? It says no md5 file and gives me an error.
Brblank44 said:
Whats a md5? It says no md5 file and gives me an error.
Click to expand...
Click to collapse
Thats normal,.the great majority of flashable zips do not include an md5 file.
What that is referring to is a hashing function, called the md5sum, that can be used to verify the integrity of a file. Most devs will provide this (in number format) so that you can check the md5sum of your local copy/download against what they provide. If anything goes wrong in a download or file transfer, the md5sum of your copy will not match the expected value, confirming that it was a bad download or that something went wrong along the way.
For your case, TWRP always checks to see if the flashable zip includes an md5sum check file that it can check your file against as an added precaution that you're not flashing something corrupted.
Brblank44 said:
Whats a md5? It says no md5 file and gives me an error.
Click to expand...
Click to collapse
Don't do the md5 verification in the Recovery. That typically fails, even if the md5 is correct.
I typically do it in Windows (I use this program, works great). If it's a really large file or I don't feel confident about the cable I'm using, I'll also check the md5sum in ES Explorer on the phone after I transfer it.
Okay I flashed it and I have the same problem. Wifi not turning on. The detox whatever its called didn't work. So I took it to sprint today after having flashed it and everything and they did a hard reset. I lost everything. Sprint couldn't swap the phone out for a new one. I am thinking about sending it back to samsung. So they can fix it. Any other ideas guys? Also thank you for your understanding and helping me.
Brblank44 said:
Okay I flashed it and I have the same problem. Wifi not turning on. The detox whatever its called didn't work. So I took it to sprint today after having flashed it and everything and they did a hard reset. I lost everything. Sprint couldn't swap the phone out for a new one. I am thinking about sending it back to samsung. So they can fix it. Any other ideas guys? Also thank you for your understanding and helping me.
Click to expand...
Click to collapse
Brblank,
Try this easy method to return to stock everything including recovery, flash count reset and device status normal. It worked perfectly for me.
Before flashing wipe Cache and Dalvik and factory reset.Then flash the file. Make sure you choose the correct file (16gb or 32gb version).
Even if it doesn't fix your WiFi issue it will put your phone in the proper state to send to Samsung.
You can place the file on your internal or external card.
Return to Stock Link
With much thanks to billard412
Hope this helps you.
I have myself a Rogers based S3, that has the stock Jelly Bean OS on it.
Its bogged down, I don't like it anymore.
I have seen the OS on the Nexus unit's and find it to be WAY better (more fluid, more options and much better UI for texting)
Now for the explanation of this thread....
I have NO idea what I'm doing anymore when it comes to this phone. It's not rooted, NO CWM installed.. And i fear i may brick it if i don't know exactly what i'm doing.
That being said, i would like to go to a stock Google OS, or something very close to it.
What are my options? I would like to try and make this as pain free as possible. As far as i can recall, rooting//cwm and Os load on my captivate was really easy... This time around, i am finding way too many "possible" ways of doing everything. I think more or less, i need to be pointed to the right way so i don't get confused.
Anyone willing to toss me a hand on this one :fingers-crossed:
http://forum.xda-developers.com/showthread.php?t=2343223
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
saj222 said:
http://forum.xda-developers.com/showthread.php?t=2343223
Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
Click to expand...
Click to collapse
Instead of linking me to something I've already read, how about actually saying something.
I'm finding too many "this might work for rogers, this might not"
Last time i followed a tutorial meant for an AT&T unit, I hard bricked the phone, and ended up tossing it
Sorry if it was in the wrong section before Kenny.
How about me not responding at all next time? I know no one is forcing me but its simple enough to find this info by searching. I understand your hesitance... No one wants an expensive brick.
I'll put something together for you later today unless someone else beats me to it. Deal?
js593 said:
What are my options? I would like to try and make this as pain free as possible. As far as i can recall, rooting//cwm and Os load on my captivate was really easy... This time around, i am finding way too many "possible" ways of doing everything. I think more or less, i need to be pointed to the right way so i don't get confused.
Click to expand...
Click to collapse
Good thread to read: http://forum.xda-developers.com/showthread.php?t=1725839
First you need to get root. 2 easy ways here. First one is install a stock rooted ROM with Odin. Look for the Rogers image here: http://forum.xda-developers.com/showthread.php?t=1739426 Second one is to install CF-Root with Odin, here: http://forum.xda-developers.com/showthread.php?t=1963790 Make sure to get the one for I747M. Second option is faster b/c the zip is way smaller. Now you have stock root.
Next get GooManager https://play.google.com/store/apps/details?id=com.s0up.goomanager&hl=en. Run it, press menu and then install open recovery script or something like that. It will install TWRP custom recovery. Now you can flash ROMs. Perform Nandroid backup before commencing flashing.
For a pure Google like experience, give Slimrom or AOKP (Task650) a try. Very stable.
Slim - http://forum.xda-developers.com/showthread.php?t=2085739
AOKP - http://forum.xda-developers.com/showthread.php?t=1766684
Dandroid is the latest stock themed to the hilt like Cyanogenmod. Very stable.
Dandroid - http://forum.xda-developers.com/showthread.php?t=2121506
saj222 said:
Good thread to read: http://forum.xda-developers.com/showthread.php?t=1725839
First you need to get root. 2 easy ways here. First one is install a stock rooted ROM with Odin. Look for the Rogers image here: http://forum.xda-developers.com/showthread.php?t=1739426 Second one is to install CF-Root with Odin, here: http://forum.xda-developers.com/showthread.php?t=1963790 Make sure to get the one for I747M. Second option is faster b/c the zip is way smaller. Now you have stock root.
Next get GooManager https://play.google.com/store/apps/details?id=com.s0up.goomanager&hl=en. Run it, press menu and then install open recovery script or something like that. It will install TWRP custom recovery. Now you can flash ROMs. Perform Nandroid backup before commencing flashing.
For a pure Google like experience, give Slimrom or AOKP (Task650) a try. Very stable.
Slim - http://forum.xda-developers.com/showthread.php?t=2085739
AOKP - http://forum.xda-developers.com/showthread.php?t=1766684
Dandroid is the latest stock themed to the hilt like Cyanogenmod. Very stable.
Dandroid - http://forum.xda-developers.com/showthread.php?t=2121506
Click to expand...
Click to collapse
Thank you very much. I';ll be looking this over and attempting this tonight.
js593 said:
I have myself a Rogers based S3, that has the stock Jelly Bean OS on it.
Its bogged down, I don't like it anymore.
I have seen the OS on the Nexus unit's and find it to be WAY better (more fluid, more options and much better UI for texting)
Now for the explanation of this thread....
I have NO idea what I'm doing anymore when it comes to this phone. It's not rooted, NO CWM installed.. And i fear i may brick it if i don't know exactly what i'm doing.
That being said, i would like to go to a stock Google OS, or something very close to it.
What are my options? I would like to try and make this as pain free as possible. As far as i can recall, rooting//cwm and Os load on my captivate was really easy... This time around, i am finding way too many "possible" ways of doing everything. I think more or less, i need to be pointed to the right way so i don't get confused.
Anyone willing to toss me a hand on this one :fingers-crossed:
Click to expand...
Click to collapse
I'm using Task650 4.2.2. on my Rogers device and IMO it's the best out there. Never bricked my phone and smooth as butter.
thecoach1999 said:
I'm using Task650 4.2.2. on my Rogers device and IMO it's the best out there. Never bricked my phone and smooth as butter.
Click to expand...
Click to collapse
Hey guys.
So i got the phone rooted, and TWRP is installed. I have a NANDROID backup already done, but i'm a little confused on the roms. Could someone help me with this?
Last i recall, the roms were a single file, Ive downloaded the AOKP JB in this thread http://forum.xda-developers.com/showthread.php?t=1766684 but i'm confused on how to install the rom (as its a .zip file, there's multiple files in the folder....)
Thank in advance!
Edit - I tried to flash the rom anyways, and AOKP one Failed and turned up with an error. It comes up saying "Error executing updater binary in zip "
Edit2 - I just managed to flash Dandroid to the S3, but apps are failing to load everywhere. Unsure if this is something to do with the network or anything, but im also not getting LTE with Rogers.... Play store wont connect either (and i did to the Gapps update...?)
js593 said:
Hey guys.
So i got the phone rooted, and TWRP is installed. I have a NANDROID backup already done, but i'm a little confused on the roms. Could someone help me with this?
Last i recall, the roms were a single file, Ive downloaded the AOKP JB in this thread http://forum.xda-developers.com/showthread.php?t=1766684 but i'm confused on how to install the rom (as its a .zip file, there's multiple files in the folder....)
Thank in advance!
Edit - I tried to flash the rom anyways, and AOKP one Failed and turned up with an error. It comes up saying "Error executing updater binary in zip "
Edit2 - I just managed to flash Dandroid to the S3, but apps are failing to load everywhere. Unsure if this is something to do with the network or anything, but im also not getting LTE with Rogers.... Play store wont connect either (and i did to the Gapps update...?)
Click to expand...
Click to collapse
Before flashing you need to wipe. Data, system, dalvik and cache. Oh and before this put the new ROM files and anything you want to keep like pics on the external sdcard.
Do you have an updated bootloader? http://forum.xda-developers.com/showthread.php?t=2321310
Try re downloading the AOKP ROM and flash the while thing (the .zip). Then flash the gapps. You may have a bad download the first time.
With non-touchwiz ROMs you need to install the ROM and gapps. Do not install any gapps with dandroid.
saj222 said:
Before flashing you need to wipe. Data, system, dalvik and cache. Oh and before this put the new ROM files and anything you want to keep like pics on the external sdcard.
Do you have an updated bootloader? http://forum.xda-developers.com/showthread.php?t=2321310
Try re downloading the AOKP ROM and flash the while thing (the .zip). Then flash the gapps. You may have a bad download the first time.
With non-touchwiz ROMs you need to install the ROM and gapps. Do not install any gapps with dandroid.
Click to expand...
Click to collapse
I believe i ran into the issue blindly.
I forgot to update the bootloader before flashing it. Will try again when i get home and report back with anything.
..
fffft said:
If that sorts your issues, then call it done and thank the people that helped you.
The earlier suggestions were good and not to be faulted. However there is more than one way to do most things. So if you are not happy for whatever reason here is a slightly different approach. There are some very stable custom ROMs that are very snappy and have a similar no lag, fluid feel (Google calls this "butter") to them vis a vis the Nexus. So a simple approach to that result would be:
1. Download and install the Samsung S3 V7.0 toolkit (program)
2. Start the toolkit program
Choose "n" when asked if you want to update the program
Choose your phone version. This is probably "53" for you
Choose option #1 from the main menu to install the necessary USB driver to your PC
After the driver is installed, connect your phone to your PC with the Samsung USB cable.
If your phone is currently stable, you can skip steps #3 + 4.
If you are uncertain, then steps #3 + 4 will restore a stock Rogers firmware as a starting point:
3. Go to Samsung updates and download a stock Rogers firmware
4. Install the stock firmware. This is toolkit menu option #8, 4, 2
5. Download the custom Wicked Aroma ROM v10 (main thread here)
6. Copy the Wicked Aroma ROM to your phone. You can do this in windows by going to file manager and drag and drop the Wicked file (leave it zipped) on the "Samsung Mobile MTP Device - Phone/Data" folder icon.
7. Flash the Wicked ROM from "recovery mode"
Ensure that your battery is at least 80% charged. Then turn your phone off and disconnect the USB cable
Push and hold the home button, volume up and power button at the same time until you feel the phone vibrate and see blue text on screen in the upper left hand corner. Then release the buttons.
On the onscreen phone menu, choose wipe (factory reset)
Then choose install and select the Wicked_v10. zip file
The rest of the install will be automated on your phone screen. It will ask you to select a number of options. If you are uncertain, then just leave them at the default settings. Ensure that you leave the wipe cache setting as is when asked. And I'd recommend the stock theme and stock kernel to start. The rest you can leave as is or change to what sounds attractive to you.
Note that the wicked ROM will change your boot splash screen. Most people won't care and it's not that hard to revert if you don't like the logo for some reason. This is the logo that appears for a few seconds when you first power up a phone.
This is a very snappy, pretty much zero lag and stable ROM. I think that you'd like it.
.
Click to expand...
Click to collapse
Thanks for the lengthy reply.
I tried putting the new bootloader on there, and tried re-flashing, but it did the same thing. So, in the mean time i'm going to use the Dandroid rom (didn't install the Gapps) and it seems to be working okay. I just fear a bit as the phone seems to be running much warmer then it usually does....
In the mean time, ill use this one, and see if it makes a difference (it could still be loading all my settings and whatnot, so we'll see what happens. I love the look of this rom though. Very simple, very clean. Exactly what i was looking for. Those samsung stock themes are terrible.... Thanks a bunch for the help people. Greatly appreciate it!
Personal taste varies a lot and there are a lot of themed ROMs on this site. So you should be able to find something that you like. It sounds like you want something snappy and Spartan looking. If you like your results so far, then no need to go any further.
If you end up trying the Wicked ROM, perhaps choose the Miui or Holo launcher and ASOP lock screen options.
There are an endless variety of home screen themes to be discovered. And no way to know what you might like. A few random screen shots:
http://media02.hongkiat.com/cool-android-homescreens/Clood.jpg
http://media02.hongkiat.com/cool-android-homescreens/evening.jpg
http://main.makeuseoflimited.netdna-cdn.com/wp-content/uploads/2012/09/jb_holo_launcher.jpg
http://i380.photobucket.com/albums/oo248/jb-dan/DroidInc/d4281332.jpg
http://mycolorscreen.com/wp-content/uploads/homescreens_2012/270592/KLPOS7.png
http://desktopspotting.com/wp-content/uploads/2011/12/Minimal-Android-Home-screen.png
.
Just installed the Wicked rom on my S3. NICE! Need to play with the settings a bit to get it configured the way I like, but a definite keeper.
Very nice job.....Kudos!
So i bought a FreedomPop LG G3 on sale and i ended up activating it to FreedomPop and i rooted it, and im wondering if i can install Marshmallow or cygn on it, my concern is.. before i bought the LG G3 i had a first Gen MOTO G from TextNow with there own unique ROM and when i installed lollipop on it, since the phone has no sim card the phone lost connection to TextNow and was basically useless outside the house so i had to ask TextNow to send me their unique Rom which they did and after installing it everything came back to normal.
now my lg g3 has a sim card slot, and came with sprint apps on it and showing sprint on lockscreen and everything. calls can be made from the android call app but texts messages are only available through FreedomPop text app.
i asked FreedomPop to unlock my phone and they said no problem doing it for me but i ended up not doing it since i do want to stay with them but then i want a different ROM.
so my questions are:
1.is there a way to backup an stock rom that came with the device so i can restore it just like i did on my TextNow incase i lose connection like before?
2.is there a way to backup FreedomPop like apps and restore it after changing the rom? will they work after installing them?
3.should i install a different rom?
4.anyone had an experience with such "locked" phones or even FreedomPop phone and can tell me how did it work for him?
shayo said:
So i bought a FreedomPop LG G3 on sale and i ended up activating it to FreedomPop and i rooted it, and im wondering if i can install Marshmallow or cygn on it, my concern is.. before i bought the LG G3 i had a first Gen MOTO G from TextNow with there own unique ROM and when i installed lollipop on it, since the phone has no sim card the phone lost connection to TextNow and was basically useless outside the house so i had to ask TextNow to send me their unique Rom which they did and after installing it everything came back to normal.
now my lg g3 has a sim card slot, and came with sprint apps on it and showing sprint on lockscreen and everything. calls can be made from the android call app but texts messages are only available through FreedomPop text app.
i asked FreedomPop to unlock my phone and they said no problem doing it for me but i ended up not doing it since i do want to stay with them but then i want a different ROM.
so my questions are:
1.is there a way to backup an stock rom that came with the device so i can restore it just like i did on my TextNow incase i lose connection like before?
2.is there a way to backup FreedomPop like apps and restore it after changing the rom? will they work after installing them?
3.should i install a different rom?
4.anyone had an experience with such "locked" phones or even FreedomPop phone and can tell me how did it work for him?
Click to expand...
Click to collapse
If it has sprint apps it is probably an ls990; check in "about phone" settings to make sure. So basically follow the ls990 thread(s) to see how to get recovery on it... http://forum.xda-developers.com/sprint-lg-g3 . Since you have root already installing a recovery should be a simple process via flashify or autorec apps - but you need to absolutely make sure you install the correct recovery file with the bump exploit or you may softbrick and have to restore with a PC. (bump is an lg g3 exploit needed for our device as we don't have a true bootloader unlock)
Re #1: if/when you put TWRP recovery on your phone you can make a backup of your freedompop stock ROM so you can restore it if you need to.
Re #2: since you're rooted you can backup all of your apps and their data with titanium or something similar. I use titanium pro because it allows you to make a zip file you can flash in TWRP while flashing your ROM, gapps, etc. & it restores your app data too; super convenient time saver. As far as will the freedompop apps work on a different ROM - they should; trying to restore them and see if they work might be the best way to go there. As long as you have a ROM backup you can restore - why not give em a try?
Re #3: that's subjective and up to you. Some people prefer stock features(especially the camera) and some xposed mods to get some extra tweaks, some people prefer custom ROMs with tons of features and the newest Android version. Again, that's on you to decide. BTW, if you do go custom ROM there are decent camera ports available that come close to stock quality.
Re #4: I have not, but I'm guessing you may need to take note of your APN settings before you change ROMs as they may be unique to freedompop & could mess up your data/text if they are not set right. That seems to be the biggest issue with people using different carriers.
Good luck & hope you enjoy your G3
LS990ZVC
Hey and thanks for your reply, yes my phone is the ls990ZVC (by the way on phone settings under brand it says "sprint" and not FreedomPop)
Q1.what do you mean by get recovery? you mean a costume recovery program on the devices main boot in-case of a problem that will replace the original recovering stock program?
Q#1. the thread you posted is for unlocking the phone? what benefits do i get from it? will i lose the 4G LTE speed like it says on the thread if i do it?
Q#2.i dont care much about camera features and also not looking for a lot of tweaks all i look for is to keep my ram and cpu power low and there for available at all time so basically having the phone act and react as fast as possible. can i achieve that with one of the different roms or having stock marshmallow installed?
Q#3. where do i get my APN settings?
Q#4. I think i know the answer to this but ill ask anyway, having TWRP recovery can save my device from softbrick right?
startswithPendswithOOH said:
If it has sprint apps it is probably an ls990; check in "about phone" settings to make sure. So basically follow the ls990 thread(s) to see how to get recovery on it... http://forum.xda-developers.com/sprint-lg-g3 . Since you have root already installing a recovery should be a simple process via flashify or autorec apps - but you need to absolutely make sure you install the correct recovery file with the bump exploit or you may softbrick and have to restore with a PC. (bump is an lg g3 exploit needed for our device as we don't have a true bootloader unlock)
Re #1: if/when you put TWRP recovery on your phone you can make a backup of your freedompop stock ROM so you can restore it if you need to.
Re #2: since you're rooted you can backup all of your apps and their data with titanium or something similar. I use titanium pro because it allows you to make a zip file you can flash in TWRP while flashing your ROM, gapps, etc. & it restores your app data too; super convenient time saver. As far as will the freedompop apps work on a different ROM - they should; trying to restore them and see if they work might be the best way to go there. As long as you have a ROM backup you can restore - why not give em a try?
Re #3: that's subjective and up to you. Some people prefer stock features(especially the camera) and some xposed mods to get some extra tweaks, some people prefer custom ROMs with tons of features and the newest Android version. Again, that's on you to decide. BTW, if you do go custom ROM there are decent camera ports available that come close to stock quality.
Re #4: I have not, but I'm guessing you may need to take note of your APN settings before you change ROMs as they may be unique to freedompop & could mess up your data/text if they are not set right. That seems to be the biggest issue with people using different carriers.
Good luck & hope you enjoy your G3
Click to expand...
Click to collapse
Anyone?
shayo said:
Hey and thanks for your reply, yes my phone is the ls990ZVC (by the way on phone settings under brand it says "sprint" and not FreedomPop)
Q1.what do you mean by get recovery? you mean a costume recovery program on the devices main boot in-case of a problem that will replace the original recovering stock program?
Q#1. the thread you posted is for unlocking the phone? what benefits do i get from it? will i lose the 4G LTE speed like it says on the thread if i do it?
Q#2.i dont care much about camera features and also not looking for a lot of tweaks all i look for is to keep my ram and cpu power low and there for available at all time so basically having the phone act and react as fast as possible. can i achieve that with one of the different roms or having stock marshmallow installed?
Q#3. where do i get my APN settings?
Q#4. I think i know the answer to this but ill ask anyway, having TWRP recovery can save my device from softbrick right?
Click to expand...
Click to collapse
Hey...sorry I missed the notification that you responded...my bad.
Recovery - TWRP recovery which allows you to backup your current ROM, wipe your device, and install ROMs. You have to have it installed if you want to run any custom ROMs. It is imperative that you use the correct file or you may bork all your software, softbrick, and re-flash on a PC. If you are unsure on how to install TWRP then read, read & ask questions in the appropriate forums - & watch youtube videos if you need guidance on how to install it.
The link I posted was for your device. You can search in the threads for anything from ROMs, TWRP, root, kernels, and troubleshooting if you get stuck.
Stock marshmallow is pretty quick & there are some pure AOSP or basic CM builds available that may suit your needs...just have to sample for yourself to see what's best.
APN settings: settings, cellular networks, access point names; if you see a feedompop apn(or anything that isn't sprint) write down the fields, or take a screenshot and email it to yourself for reference.
Having TWRP recovery saves you from your mistakes. Once you get it installed you can make backups that you can always restore if you experiment with new ROMs or tweaks, etc. It is the backbone of flashing and modifying your phone.
Again, sorry for leaving you hanging. I'll pay closer attention to my notifications in the future
startswithPendswithOOH said:
Hey...sorry I missed the notification that you responded...my bad.
Recovery - TWRP recovery which allows you to backup your current ROM, wipe your device, and install ROMs. You have to have it installed if you want to run any custom ROMs. It is imperative that you use the correct file or you may bork all your software, softbrick, and re-flash on a PC. If you are unsure on how to install TWRP then read, read & ask questions in the appropriate forums - & watch youtube videos if you need guidance on how to install it.
The link I posted was for your device. You can search in the threads for anything from ROMs, TWRP, root, kernels, and troubleshooting if you get stuck.
Stock marshmallow is pretty quick & there are some pure AOSP or basic CM builds available that may suit your needs...just have to sample for yourself to see what's best.
APN settings: settings, cellular networks, access point names; if you see a feedompop apn(or anything that isn't sprint) write down the fields, or take a screenshot and email it to yourself for reference.
Having TWRP recovery saves you from your mistakes. Once you get it installed you can make backups that you can always restore if you experiment with new ROMs or tweaks, etc. It is the backbone of flashing and modifying your phone.
Again, sorry for leaving you hanging. I'll pay closer attention to my notifications in the future
Click to expand...
Click to collapse
So i went with liquid smooth rom and after having some issues with titanium backup restoring apps i tried a few things and ended up having all system apps crashing on boot (dialer etc...) so i restored back to stock rom and everything works fine but now when i wanted to go back to liquid smooth TWRP says i cant and that the install files might be incomplete, actually it says that way about gapps too.. why is that? also having the problems i just mentioned with the rom, does that mean the rom is not stable.. or it is something i did? should i even try going back to that rom? i mean i kind of liked it in the 2 hours i got to test it before everything crashed. i went throught the link you sent me and eventually figured out that there is a rom section on top of the page where i can actually see the roms which i didnt realize that before, seems like restoring function on TWRP works great but i wish there was a way to just know which rom would work best for my phone in terms of performance which is what im looking for.
shayo said:
So i went with liquid smooth rom and after having some issues with titanium backup restoring apps i tried a few things and ended up having all system apps crashing on boot (dialer etc...) so i restored back to stock rom and everything works fine but now when i wanted to go back to liquid smooth TWRP says i cant and that the install files might be incomplete, actually it says that way about gapps too.. why is that? also having the problems i just mentioned with the rom, does that mean the rom is not stable.. or it is something i did? should i even try going back to that rom? i mean i kind of liked it in the 2 hours i got to test it before everything crashed. i went throught the link you sent me and eventually figured out that there is a rom section on top of the page where i can actually see the roms which i didnt realize that before, seems like restoring function on TWRP works great but i wish there was a way to just know which rom would work best for my phone in terms of performance which is what im looking for.
Click to expand...
Click to collapse
ended up having all system apps crashing on boot
My guess is maybe you included system apps in your titanium backup? They are the ones listed in red; you don't want to include any system apps in your app restore/update.zip because they may be incompatible with the ROM you are flashing. So unless you read in the liquid smooth thread of other users having issues, I would doubt the ROM itself caused things to crash.
As far as the TWRP error about incomplete files...I'm not quite sure what that means. But you can take a screenshot while in TWRP(vol down + power) and post it up here to better explain the issue.
If you want to try liquid again try a fresh download of the ROM and fresh download of gapps(make sure you're downloading the correct gapps - LP & MM use different ones). If you run into problems with crashes again, try and flash just the ROM by itself to help determine if the errors are caused by the ROM or the gapps you're using.
I like liquid smooth...used to use it on my galaxy nexus back in the day. There are lots of good ones out there, itjust depends what you like. I usually use Tesla(aosp), but aokp and turbo are both really nice too. If you prefer CM based ROMs there are a ton of them too. Pick your poison.
So to clarify: it sounds like you did everything right - except don't restore system apps with titanium, make sure your gapps are compatible with your ROM, and have fun flashing