Or is there a processes?
I know if you go from cm10.1 to cm10 you can for the 0 fix but the phone reads the files just fine....
What about from Aosp 4.2 to TW 4.1
Any special procedure?
Thanks
Sent from my SGH-I747 using Tapatalk 2
No one??
Sent from my SGH-I747 using Tapatalk 2
Its the same process as flashing to aosp.
No issues man. I flashed euroskank and then now Darth stalker and have no problem going from 4.2 to 4.1
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
jayRokk said:
Or is there a processes?
I know if you go from cm10.1 to cm10 you can for the 0 fix but the phone reads the files just fine....
What about from Aosp 4.2 to TW 4.1
Any special procedure?
your question has already been answered but to confirm/agree, flash as usual. cheers
Click to expand...
Click to collapse
create nandroid backup, factory reset, wipe system, and flash
Thank you for the answers
Idk where I read that there was a specific process but I guess I read wrong...
Just want to double check everything
I don't want to have a paperweight
Sent from my SGH-I747 using Tapatalk 2
Related
I'm going to replace my T989's stock ROM with Jugg 5.0.
How do I go about replacing the stock Kernel with Mr. X's Synergy. Only reason I want that Kernel is to have the flashing capacitive buttons for notification purposes...
Do you recommend these two together? Is that possible (since the Kernel is based off Jugg)?
I know how to install the ROM...just not the Kernel.
Also, what is the purpose of replacing the "stock modem?"
Thank you!
my two cent
Edit::: yes you can have Synergy kernel and Juggernaut 's
Rushing said:
Juggernaut 5.0 install directions state that you shouldn't flash something over Jugg 5.0 unless it is states that you can but it doesn't say that you can flash anything over it so no. The rom is fine without a different kernel. Thanks to Team Kang for Juggernaut. You wont need to replace the modem just flash the rom you probably already have so dont fu*k it up here is what I read
"Wanna flash something over this rom? Does it say it will work with this rom? No? and you flashed it anyways??? *sigh* WHAT WERE YOU THINKING?!" Correect me if I'm wrong thanks
Click to expand...
Click to collapse
Completely unhelpful, but thanks for attempting.
Darkide and juggs?
Sent from my SGH-T989 using xda premium
You can flash the synergy rom just fine with jugs 5.0. Im using that setup right now. Wipe cache and dalvik and then flash synergy then reboot.
Sent from my SGH-T989 using XDA App
anomy13 said:
You can flash the synergy rom just fine with jugs 5.0. Im using that setup right now. Wipe cache and dalvik and then flash synergy then reboot.
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
Thank you ...
Sent from my SGH-T989 using xda premium
I think you need to diversify your portfolio
Sent from my SGH-T989 using xda premium
I'm using jugs 5.0 with a darkside kernel and its awesome
Sent from my SGH-T989 using XDA
Introduction:
Some of you may know me from my AOSP+ ROMs and my work with CodeName Android. I have previously made ROMs for the Nexus devices and some others. I had a small break but I am back now. The AT&T Galaxy SIII is one of the devices I will be building for. This is a modified stock ROM for now. Will have AOSP based ROMs soon.
Info:
UCALG1 - Modified stock ROM
Kernel - not secure for ADB access plus some other tweaks
Root, Zipalign and deodexed
Removed all bloatware
Replaced Samsung keyboard with AOSP ICS keyboard
Added enhanced reboot menu
International Boot animation and sounds
Web Presence:
Twitter
Google+
Would be best to follow me on Google+ for latest updates and news. Sometimes I post stuff there more than I do here...
Info:
UCALG1 - Modified stock ROM
Change Log:
V1.1
Added WiFi Tethering
Added init.d support
Some other tweaks but dont recall all since I have been working on this since 10 AM
V1 - First release
Install Instructions:
Root and Install Clockwork recovery if you have not done so
Place ROM on either internal or external storage
Up to you to wipe or not, the installer will wipe dalvik cache
Install ROM
Reboot
Enjoy!
Downloads:
ROM - HERE
Filename - SGH_I747_UCALG1_AndroidUser_V1.1.zip
MD5 - e86011a097f44e511f73e11100605f8f
Credits:
Google, AOSP, Sixstring, Codenamedroid, Braway, Romanbb, CM, peteralfonso, xplodwild and all others that I have gained knowledge and source from.
Einstein quote but modified a bit for this
I am often worried at the thought that my Android development is based to such a large extent on the work of my fellow developers and I am aware of my great indebtedness to them.
Reserved...
Thanks mate, I will be adding you to the Directory
Is this AOSP base? Will AOSP themes be applicable?
Thanks bro remember you from the gnex!!!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
tomween1 said:
Thanks mate, I will be adding you to the Directory
Is this AOSP base? Will AOSP themes be applicable?
Click to expand...
Click to collapse
Thanks...This is stock modified ROM for now. Will have AOSP based ones once I am done building and testing.
jroyalty7 said:
Thanks bro remember you from the gnex!!!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Nice to see you hear Porting all CNA features now to the ATT GS III
Good stuff, needed to know where to put you:laugh: Directory
tomween1 said:
Good stuff, needed to know where to put you:laugh: Directory
Click to expand...
Click to collapse
Thanks!
Rom looks really nice. Quick question, is the tethering mod enabled?
Sent from my GT-N7000 using Tapatalk 2
airbillion said:
Rom looks really nice. Quick question, is the tethering mod enabled?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
No...going to update it later on with the tether fix.
AndroidUser00110001 said:
No...going to update it later on with the tether fix.
Click to expand...
Click to collapse
Sounds good! Look forward to the update.
Thanks
Update is up...most likely last update to stock ROM as I am building from source now
Has anyone tried on Telus SG3
Sent from my SAMSUNG-SGH-I747 using xda premium
AndroidUser00110001 said:
Update is up...most likely last update to stock ROM as I am building from source now
Click to expand...
Click to collapse
Great work man! I've found the wifi disconnect problem that i was having with the other TW Roms is gone and it has had the best over all balance of performance and stability. I am however a fan of AOSP so i look forward to your work, thanks
Can I flash this straight from cm9 with all the usual wipes?? Or do I have to go back to stock first? Thanks in advance...
Sent from my SAMSUNG-SGH-I747 using xda premium
Jason123420 said:
Can I flash this straight from cm9 with all the usual wipes?? Or do I have to go back to stock first? Thanks in advance...
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes, wipe /system, /data, /cache, and Dalvik cache and it will install fine.
id10terrordfw said:
Yes, wipe /system, /data, /cache, and Dalvik cache and it will install fine.
Click to expand...
Click to collapse
Will this change my modem to LG1? If it does will that modem still work on my Bell version of this phone? Sorry for all the noob questions but I'm coming from an sgs1 and its a little different going from aosp roms to stock.. and I haven't seen a thread for cwm flashable modems so I'm curious lol
Sent from my SAMSUNG-SGH-I747 using xda premium
Jason123420 said:
Will this change my modem to LG1? If it does will that modem still work on my Bell version of this phone? Sorry for all the noob questions but I'm coming from an sgs1 and its a little different going from aosp roms to stock.. and I haven't seen a thread for cwm flashable modems so I'm curious lol
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
No, I just flashed and modem didn't change.
Sent from my SGH-I747M using Tapatalk 2
Thanks for this. Working great so far. I really prefer the stock theme on a stock based rom. Excellent work!
Sent from my Red S3
What's the difference between ucal and uclem?
I'm on touchmii, if I flash this would it just work or need something different because I'm on uclem?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
great rom :good: the insecure kernel feature helped me with the back up imei thingy, it runs very smooth and no bloat!
i know i know stupid for not reading properly and following links from google...but i can still get into recovery and download so i assume i am ok once i flash a rom for the note 2? downloading jellybeer as we speak...
also, i cant seem to find an AOKP rom. i guess im missing that too by lack of reading...
Go dl a stock root injected rom and MAKE A BACKUP
Sent from my SAMSUNG-SGH-I317 using xda premium
If you can get into download or recovery you should be ok. Download any NOTE 2 <---! Rom and put it on your external SD Card. Just install it from TWRP/CWM from there. AOKP isn't out for our phone yet, and I haven't seen a stock version rom either.
twanskys204 said:
Go dl a stock root injected rom and MAKE A BACKUP
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
thanks for the quick reply. im already up and running w/ jellybeer. any word on a nice aokp rom? or even all in one like king kang?
No. Just remember to make a backup
Sent from my SAMSUNG-SGH-I317 using xda premium
hapticxchaos said:
thanks for the quick reply. im already up and running w/ jellybeer. any word on a nice aokp rom? or even all in one like king kang?
Click to expand...
Click to collapse
Closest to KK is going to be Jedi or Clearom. Both are outstanding roms, with awesome support. Check them out in the development section.
What is the best Touchwiz 5 rom. I have tried Jedi Jelly 6 but it doesn't provide me with a stock Touchwiz rom. Any suggestions?
funbulton said:
What is the best Touchwiz 5 rom. I have tried Jedi Jelly 6 but it doesn't provide me with a stock Touchwiz rom. Any suggestions?
Click to expand...
Click to collapse
as of now. i would say Jedi Mind Trick v6 or rooted stock rom
funbulton said:
What is the best Touchwiz 5 rom. I have tried Jedi Jelly 6 but it doesn't provide me with a stock Touchwiz rom. Any suggestions?
Click to expand...
Click to collapse
EMBRYO 6.11, best twiz ROM available!! Hands down jmt has nothing on it...
Sent from my SGH-T989 using xda premium
Infamous and northern infamous.
Sent from my cell phone telephone
Oh the agony... my birthday was the 29th haha.:sly:
Infamous with arc kernel or cl3kener stock speedy touchwiz ROM with his Tiberius nightly kernel
embryo 7 off the skyrocket forums..imo its worth flashing the 7 over 6.11. flash tiberious latest nightly nd u get s2w bln nd all that gud stuf
JesusWazBlack said:
embryo 7 off the skyrocket forums..imo its worth flashing the 7 over 6.11. flash tiberious latest nightly nd u get s2w bln nd all that gud stuf
Click to expand...
Click to collapse
Have to flash the rotation fix too right?
Sent from my SGH-T989 using xda app-developers app
SukDeezNutz said:
Have to flash the rotation fix too right?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Nope since u flashed Tiberius . its all good
JesusWazBlack said:
Nope since u flashed Tiberius . its all good
Click to expand...
Click to collapse
Do you have a link to Embryo 7 that works for T989? All i found on our forum is 6.11. I found and downloaded 7 from the skyrocket forum but it wouldnt boot, even after flashing tiberious.
Embryo 7 is only the att skyrocket forums, so if you flash that ROM you would need a tmobile radio and a t989 kernel for our phone if you want you can grab it here http://forum.xda-developers.com/showthread.php?t=2275630 and im sure @soupysoup would be happy to help if you have anymore questions about the ROM as if im correct he loves that ROM
SukDeezNutz said:
Do you have a link to Embryo 7 that works for T989? All i found on our forum is 6.11. I found and downloaded 7 from the skyrocket forum but it wouldnt boot, even after flashing tiberious.
Click to expand...
Click to collapse
Did you wipe system and data? Do you have newest radio installed? You flashed rom, then t989 4.1.2 kernel before rebooting. Make sire you flashed proper kernel. Nora 4.2.2 kernel. And wipe cache and davlik after flashing those 2 then reboot? And no gapps required.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
kj2112 said:
Did you wipe system and data? Do you have newest radio installed? You flashed rom, then t989 4.1.2 kernel before rebooting. Make sire you flashed proper kernel. Nora 4.2.2 kernel. And wipe cache and davlik after flashing those 2 then reboot? And no gapps required.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I wiped everything, flashed ROM then Tiberius kernel. Stuck at boot screen. I'll try flashing the kernel you reference and the newest radio with it and see if that works.
Sent from my SGH-T989 using xda app-developers app
---------- Post added at 08:56 AM ---------- Previous post was at 08:35 AM ----------
kj2112 said:
Did you wipe system and data? Do you have newest radio installed? You flashed rom, then t989 4.1.2 kernel before rebooting. Make sire you flashed proper kernel. Nora 4.2.2 kernel. And wipe cache and davlik after flashing those 2 then reboot? And no gapps required.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
It needs to be a 4.1.2 kernel right? I'm flashing the Tibirious TW kernel.
SukDeezNutz said:
I wiped everything, flashed ROM then Tiberius kernel. Stuck at boot screen. I'll try flashing the kernel you reference and the newest radio with it and see if that works.
Sent from my SGH-T989 using xda app-developers app
---------- Post added at 08:56 AM ---------- Previous post was at 08:35 AM ----------
It needs to be a 4.1.2 kernel right? I'm flashing the Tibirious TW kernel.
Click to expand...
Click to collapse
Pretty sure embryo is 4.1.2....so yes. Try infamous 4.1.2 kernel too of you still have issues. In our dev section. And the new T-Mobile or Telus radios are all that will work.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
kj2112 said:
Pretty sure embryo is 4.1.2....so yes. Try infamous 4.1.2 kernel too of you still have issues. In our dev section. And the new T-Mobile or Telus radios are all that will work.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I got it to boot and have good service, but i cant sign into my google account. I put in my email and password click next, it seems like its thinking, then kicks me back to the sign in page again???
SukDeezNutz said:
I got it to boot and have good service, but i cant sign into my google account. I put in my email and password click next, it seems like its thinking, then kicks me back to the sign in page again???
Click to expand...
Click to collapse
Can you skip it and check your apn settings? They probably need to be entered manually. Did for me on Telus anyway.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Is there a tw 4.2.2 rom for the t989? I doubt it but worth a question haha
gabriel1946 said:
Is there a tw 4.2.2 rom for the t989? I doubt it but worth a question haha
Click to expand...
Click to collapse
No the only phone running 4.2.2 tw is the s4 and they haven't released any source yet, so until we see that there's no hope
Sent from my SAMSUNG-SGH-T989 using xda premium
soupysoup said:
No the only phone running 4.2.2 tw is the s4 and they haven't released any source yet, so until we see that there's no hope
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Imma revert back to tw for a bit dam flashing habit lol have u found a good s4 or ink effect lockscreen mod?
gabriel1946 said:
Imma revert back to tw for a bit dam flashing habit lol have u found a good s4 or ink effect lockscreen mod?
Click to expand...
Click to collapse
No haven't found any s4 lockscreen that actually works lol, but I do know with embryo and the icon themer u won't know ur on an s2, its got the s4 svoice app (and it works) wallpapers everything, and its very fast I benchmark high 11s every time, stable too, embryo 7 is nice too but I can't get over the skyrocket fingerprint lol
Sent from my SAMSUNG-SGH-T989 using xda premium
Ok now that I'm confident in my ability to flash ROMS and Kernels in the new Linux 3.0 & 3.4 versions that came with JB, is there anyone who could help me out with finding modems and flashing them and what each modem is for and etc? I really don't understand the new system as i came over from the OG EVO and from what i understand thus far, its not exactly the same as flashing radios as it was with GB or ICS. Any help would be greatly appreciated. Tried looking through stickies but couldnt find anything.
Sent from my SPH-L710 using xda premium
This thread will guide you http://forum.xda-developers.com/showthread.php?p=38172219
Posts #1 through #5 where you will find links to modems. LJ7 and MD4 seem to work best. But these devices are not like HTC devices so don't put that much concern into it.
Sent from the future via Tapatalk 4
Ok thanks for the help. About updating the PRL on AOSP roms though.... I downloaded the script and ran the scripts using script manager exactly as the guide said to do so, but i cant enter diagnostics mode. Any idea why?
Sent from my SPH-L710 using xda premium
hawke591 said:
Ok thanks for the help. About updating the PRL on AOSP roms though.... I downloaded the script and ran the scripts using script manager exactly as the guide said to do so, but i cant enter diagnostics mode. Any idea why?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Won't really work on the S3... Best and easiest thing to do is make a nandroid then flash tw rom update prl and profile and then restore nandroid
Sent from the future via Tapatalk 4
Ok, was just curious about that. I know about the nandroid backup and all. Its basically the same as it was with the old aosp/sense system. But thanks a lot for your help. And hopefully I'll see an improvement in my signal strength and quality. Do you have any other tips that could help?
Sent from my SPH-L710 using xda premium
Nope other than stick to TW roms, signal strength will be better and lte, 3g exchange is much better.
Sent from the future via Tapatalk 4
Yea well it wouldnt make too much of a difference with 3G and LTE considering I'm in an area that doesnt have LTE coverage yet. And just curious here, but the synergy port from verizon IS considered a TW rom right?
Sent from my SPH-L710 using xda premium
yeah no lte it makes no difference. I don't know about synergy but just look in the OP it's either TW, AOSP or AOKP. If you don't have to flash gapps it's TW.
Sent from the future via Tapatalk 4
Ok thanks for your help.
Sent from my SPH-L710 using xda premium
All AOSP are 3.4 kernel's now. CM needs MD4 to flash. It's in freeza's thread
hawke591 said:
Ok now that I'm confident in my ability to flash ROMS and Kernels in the new Linux 3.0 & 3.4 versions that came with JB, is there anyone who could help me out with finding modems and flashing them and what each modem is for and etc? I really don't understand the new system as i came over from the OG EVO and from what i understand thus far, its not exactly the same as flashing radios as it was with GB or ICS. Any help would be greatly appreciated. Tried looking through stickies but couldnt find anything.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I flashed the md4 after edfunkycold told me where to find and DL them. But i am on md4 modem and am running cm. It IS on the 3.4 but the scripts still dont work so im just going to do the touchwiz trick.
Sent from my SPH-L710 using xda premium
hawke591 said:
Ok thanks for the help. About updating the PRL on AOSP roms though.... I downloaded the script and ran the scripts using script manager exactly as the guide said to do so, but i cant enter diagnostics mode. Any idea why?
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Since the update to the 3.4.x kernel the scripts don't work anymore. Flash a TW ROM and follow those instructions