Hi,
When I'm in my car and have my bluetooth headset on connected to my Touch HD, I would love an an application to detect that I have my headset on, and to automatically read allowed any new text messages or emails after, say, a delay of 10 seconds.
Does anyone know of any software that could do this?
Thanks!
Dave
Microsoft Voice command does this perfectly. It reads sms's and calender reminders and email subject lines and sender.
seal said:
Microsoft Voice command does this perfectly. It reads sms's and calender reminders and email subject lines and sender.
Click to expand...
Click to collapse
+1
You can also set MSVC to only read messages over bluetooth/wired headset.
Great - this looks great. However if I look at the latest version (1.6) I see a number of comments in various places about it not working properly on the HTC Touch range of phones. For example see the comments at the bottom of the Hangago page here...
http://www.handango.co.uk/PlatformProductDetail.jsp?siteId=172&platformId=2&productType=2&productId=151270#expand
Can people confirm that you have this working OK on the touch HD - v1.6?
davehodgkinson said:
Can people confirm that you have this working OK on the touch HD - v1.6?
Click to expand...
Click to collapse
I have v1.6.1971 working on my Xperia (similar interface to Touch HD). I used spb pocket plus to add it to a "long button push".
You need to set it up in |START|SETTINGS|PERSONAL|VOICE COMMAND| and map a button to |START|PROGRAMS|ACCESSORIES|VOICE COMMAND|.
You'll also need to soft reset after installing and play around a little with the settings (i.e. uncheck "High Priority Messages only" in the messaging options etc.).
Can you download a trial to test it first?
The only problem I have is that it does not announce the caller for incoming calls. I assume because this does not work on the xperia that it will not work on other HTC devices too.
buzz83 said:
I have v1.6.1971 working on my Xperia (similar interface to Touch HD). I used spb pocket plus to add it to a "long button push".
You need to set it up in |START|SETTINGS|PERSONAL|VOICE COMMAND| and map a button to |START|PROGRAMS|ACCESSORIES|VOICE COMMAND|.
You'll also need to soft reset after installing and play around a little with the settings (i.e. uncheck "High Priority Messages only" in the messaging options etc.).
Can you download a trial to test it first?
The only problem I have is that it does not announce the caller for incoming calls. I assume because this does not work on the xperia that it will not work on other HTC devices too.
Click to expand...
Click to collapse
Announcement of incoming calls has been fixed in several of the cooked ROMs that include MS Voicecommand.
OK great - I'll download it and give it a try.
Matterhorn... do you know whether the fix that has been included in the cooked ROMs is available separately, as I don't want to replace my ROM...
davehodgkinson said:
Great - this looks great. However if I look at the latest version (1.6) I see a number of comments in various places about it not working properly on the HTC Touch range of phones. For example see the comments at the bottom of the Hangago page here...
http://www.handango.co.uk/PlatformProductDetail.jsp?siteId=172&platformId=2&productType=2&productId=151270#expand
Can people confirm that you have this working OK on the touch HD - v1.6?
Click to expand...
Click to collapse
I am using version 1.6.19209 with stock Orange rom, works great via speaker or bluetooth
Great - thank you! I'll have a go and report back.
OK so the update. I have successfully installed in (with a little help from the post over here), and have tested it with the basic functions, and it works OK. Not perfect with names, but for the basic things it works fine.
However, one of the main reasons, as you know, that I wanted this is so that it 1) works with my bluetooth hands free (a Plantronics Voyager 520) and reads out emails/texts over the bluetooth hands free when I'm wearing it. There is a setting in SETTINGS>VOICE COMMAND, where you can select "notifications" and select whether it notifies using "bluetooth hands free only", "over speaker if bluetooth is not available" or finally "only over speaker". However the notifications do not seem to be working at all - when I receive a text message, the phone makes the text message tone, it vibrates and nothing happens.
Am I doing something wrong?
[EDIT]:
I've just worked out the settings dialogue a bit more (i.e. you can select on each of the category of item and then press options)... Email is in there, but text messages do not seem to be in the list? Am I therefore to believe that text messages cannot be read out?
davehodgkinson said:
OK so the update. I have successfully installed in (with a little help from the post over here), and have tested it with the basic functions, and it works OK. Not perfect with names, but for the basic things it works fine.
However, one of the main reasons, as you know, that I wanted this is so that it 1) works with my bluetooth hands free (a Plantronics Voyager 520) and reads out emails/texts over the bluetooth hands free when I'm wearing it. There is a setting in SETTINGS>VOICE COMMAND, where you can select "notifications" and select whether it notifies using "bluetooth hands free only", "over speaker if bluetooth is not available" or finally "only over speaker". However the notifications do not seem to be working at all - when I receive a text message, the phone makes the text message tone, it vibrates and nothing happens.
Am I doing something wrong?
[EDIT]:
I've just worked out the settings dialogue a bit more (i.e. you can select on each of the category of item and then press options)... Email is in there, but text messages do not seem to be in the list? Am I therefore to believe that text messages cannot be read out?
Click to expand...
Click to collapse
Mine reads out the header from an email and all of the text message. Both come under messaging in the tick boxes.Click on Messaging and under options tick Anounce new messages Under Notifications I have ticked "Announce notifications using bluetooth hands free if available.
Works fie for me on speaker, music headset and bluetoth
Try under Messaging>Options - delselecting 'High priority messages only'
And under Messaging>Notifications - deselecting 'Only during free time'
This worked for me.
JB
Just to let you know, im using miri 6.5 v10 and voicecomand stopped any calls and messages being heard or felt. Same happened with davidueck 6.5 v8 so im guessing some roms dont work with it
For the guys that have it working, what roms are you running?
OK so the advice I've followed on this forum means I can now hear it announce text messages and emails and read them out! Great! And what is even more impressive is that it now works over my bluetooth headset too!
The ONLY thing that therefore doesn't work is the bluetooth headset being able to be used to speak commands to the phone. I was hoping that the button on my bluetooth headset that is usually used to answer or end calls would initiate MVC and allow me to control my phone from my headset. Any ideas why this wouldn't work?
Thanks
EDIT - ITS FIXED! Weird's I soft reset the phone and then held down the button my headset for a little bit longer and no its working fine! Brilliant.
Trixster101 said:
For the guys that have it working, what roms are you running?
Click to expand...
Click to collapse
Personally I am using a stock ROM on an Orange phone.
davehodgkinson said:
OK so the advice I've followed on this forum means I can now hear it announce text messages and emails and read them out! Great! And what is even more impressive is that it now works over my bluetooth headset too!
The ONLY thing that therefore doesn't work is the bluetooth headset being able to be used to speak commands to the phone. I was hoping that the button on my bluetooth headset that is usually used to answer or end calls would initiate MVC and allow me to control my phone from my headset. Any ideas why this wouldn't work?
Thanks
EDIT - ITS FIXED! Weird's I soft reset the phone and then held down the button my headset for a little bit longer and no its working fine! Brilliant.
Click to expand...
Click to collapse
Edit: OK glad it's working.
About incoming call announce question from a previous poster:
I've heard reports that with some newer roms the announce for incoming call doesn't work properly when MSVC is installed with a cab. The ROM cook has to hack in a fix...I don't think there is a cab to fix this problem.
Just wondering if anyone has come across this when i connect my Blue tooth car kit to my TP2 it connects fine i can make calls fine i receive calls fine except those that are in my contacts list
If one of those ring me then the blue tooth device will not answer them the only way i can get it to answer any calls that are in my contacts is to delete the name of the contact then i can answer it via blue tooth
strange one
Do you use custom ring tones for your contacts? IIRC, custom ring tones don't work over HFP.
Does your carkit require you sync your contacts?.. If you have maybe unsync your contacts.. if it is an option and you havnt.. maybe try syncing the contacts I've never heard of this issue before
Thanks for that guys but no go it seems i have to give contacts no name just a pic and bluetooth will answer strange
What car kit do you have?
Try things in this thread: http://forum.xda-developers.com/showthread.php?t=591322&highlight=bluetooth
Bought a brand new Subaru this week and tried to sync my phonebook to it... no joy.
I'm running the latest SOKP ROM, which in every other respect is awesome.
The BT works, I can stream audio and make phone calls. But when I try to send contact information (or my phonebook) to the car, the car waits, and the phone does not respond.
Any ideas?
Hello
I have S4 mini I19I95 and I put custom Rom "lolipop" , and everything is working fine expect when someone calls me it says "Application phone is stopped working " and I cant answer any phone call.
Anyone have some solution ?
I can call anyone,but when I want to recive a phone call , application just crashes
Never mind guys I fixed it just switched to Deafult profile
Hi
I don't know if this is maybe a phone issue or an android issue? you have to forgive me as I have finally gone to android from apple after 5 years
I have this really annoying problem now that when my phone pairs with my car on Bluetooth there is no problem with downloading contacts, call history etc except now when I get an incoming call it only displays the number and not the contact name which can be frustrating if it is someone that I don't want to talk too.
All my contacts are mainly UK but I travel abroad a lot so they are stored on google contacts with the international prefix as +44 but when I get an incoming call it shows it as 07**** which is the normal number without the international code and no contact name. I only have this problem with incoming calls in the car on Bluetooth any other time displays name fine.
Any help or ideas would be great .
alesx81 said:
Hi
I don't know if this is maybe a phone issue or an android issue? you have to forgive me as I have finally gone to android from apple after 5 years
I have this really annoying problem now that when my phone pairs with my car on Bluetooth there is no problem with downloading contacts, call history etc except now when I get an incoming call it only displays the number and not the contact name which can be frustrating if it is someone that I don't want to talk too.
All my contacts are mainly UK but I travel abroad a lot so they are stored on google contacts with the international prefix as +44 but when I get an incoming call it shows it as 07**** which is the normal number without the international code and no contact name. I only have this problem with incoming calls in the car on Bluetooth any other time displays name fine.
Any help or ideas would be great .
Click to expand...
Click to collapse
I think that depends on the car you have. With my car eveything looks fine and shows the contact info. Even with both my mobiles connected (iPhone SE as secondary phone) everything works fine.