Any one here using the Exhibit II?? A friend of mine asked me to port my rom V4 to your phone but he became suddenly inactive
Anyone risking to test this, i have never tried porting before so i am not sure if this could work or no. So make a backup before flashing
---EDIT--
DONT FLASH IT OR YOU'LL GET A BOOTLOOP!!
Related
I tried to use different ROMs and Radios and no one can help me. When I turn on wi-fi it shows me "Error" all the time. What can I do to fix it? Some sayd me to open my phone, find wi-fi module and check a cable, but I don't have any chance to do it. What can you advise me? Thank
I had the same problem with HoneySense RC1, but I reflashed the ROM then UNITY V4 w/o booting between and has been working good...that's what I did with Honeysense but without knowing what ROM you're using it's hard to say what the problem is!!!!
I have Shokouhi Saga G2 ROM. But I installed a lot of different ROMs and no one helped me. Maybe today or tommorow I will install UNITY v4 and then write there what will happen. thank
installed UNITY v4 and nothing changed. Maybe i've done something wrong? Can You say me, how i should use this? I loaded ROM manager, booted into Recovery and flashed UNITY. What else? Thank
SuperWipeG2
You may wanna try SuperWipeG2:
http://forum.xda-developers.com/showthread.php?t=1044992
You will need to do a fresh install of a ROM but this has worked for me in the past also... Just flash the .zip like a ROM, then flash your ROM and then UNITY4 (only if you're using a Sense ROM)!!! Try that on for size, if that doesn't work you need someone more talented than I am!!!
BTTRDYZ said:
You may wanna try SuperWipeG2:
http://forum.xda-developers.com/showthread.php?t=1044992
You will need to do a fresh install of a ROM but this has worked for me in the past also... Just flash the .zip like a ROM, then flash your ROM and then UNITY4 (only if you're using a Sense ROM)!!! Try that on for size, if that doesn't work you need someone more talented than I am!!!
Click to expand...
Click to collapse
Done all this what you said me and nothing changed I turned on a wi-fi and it started and tried to find network, but after 5 seconds it shows me "can not start a scan for a network"
Maybe when I dropped my phone on the ground and that damaged a wi-fi module...
i flashed the CyanogenMod 9.0.0-RC0-GT-S5660-GalaxyICS-KANG-beta5, everything seemed to work fine, then i noticed that i wasn't getting any service at all. i then tried cyanogen 7.2 and same story. 7.2 is letting me make 911 calls unlike the ics rom.
can anyone help me pin the problem down and fix it? please and many thanks
i'm now in an endless boot cycle...
is there a guide to just to back to stock?
Flash stock rom via Odin if u want
@wiwid_colgate
Galaxy Gio S5660
#GalaxyICS
it was a supposed stock oden flash that caused me the never ending boot cycle
Odin does not reformat the /data and /cache partitions. Which would cause bootloops on a stock kernel that doesn't know how to handle ext4.
Use an RFS compatible recovery. Otherwise dd back empty RFS partitions back into place.
i had some problems with setting other launcher than adw on default. next time i'd restart the phone it got stucked at samsung logo. So i didn't set my favorite launcher on default and problems were solved. maybe it'll help.
For me the same prob. no service with CyanogenMod 9.0.0-RC0-GT-S5660-GalaxyICS-KANG-beta5 and cyanogen 7.2.
After that i flash with "S5660XXKTI - SER" (One Package-Android 2.3.6 Gingerbread stock)with odin and it runs like a train....(not like the dutch trains)
Do a full whipe before and after flashing.
coolhof said:
with odin and it runs like a train....(not like the dutch trains)
Click to expand...
Click to collapse
lol. that sentence has to be explained for people outside of the netherlands...
our train service is well known because of not driving trains when it freezes, a bit. like -10 degrees and ''wissels'' the things that make sure a train can move from railroad to another railroad, something like this..
we know much about water and dikes, but not about trainrail.
lol
misfit41 said:
i flashed the CyanogenMod 9.0.0-RC0-GT-S5660-GalaxyICS-KANG-beta5, everything seemed to work fine, then i noticed that i wasn't getting any service at all. i then tried cyanogen 7.2 and same story. 7.2 is letting me make 911 calls unlike the ics rom.
can anyone help me pin the problem down and fix it? please and many thanks
Click to expand...
Click to collapse
Wait.. you tested it by calling 911?
Sent from my GT-S5660 using xda premium
sim card problem
hey collholf , i have same problem with my gio, it say no service i have fully wiped and then flashed S5660XXKTI - SER" (One Package-Android 2.3.6 Gingerbread stock) after flashing i have wiped again , but i m still having same problem , plz help me out of this , my gio recognize the sim card for two hours or four hours then it says no service or no mobile network.
suhailaslam said:
hey collholf , i have same problem with my gio, it say no service i have fully wiped and then flashed S5660XXKTI - SER" (One Package-Android 2.3.6 Gingerbread stock) after flashing i have wiped again , but i m still having same problem , plz help me out of this , my gio recognize the sim card for two hours or four hours then it says no service or no mobile network.
Click to expand...
Click to collapse
You can try another stock firmware go back to 2.2.1 Froyo or 2.3.3. Gingerbread.
And don't forget to select Wipe data/factory reset before and after flashing.
Check if everything is working,if so than flash 3.3.6.
More i really don't no.
Maybe it has to do something about the "radio" you can found out by search here on xda.
So I have a rooted galaxy s3 sph-l710. I am running PAC man v21.0 and I flashed a kernel and when my phone booted up, it said the phone was not activated and if I try to activate through the phone or online with my IMEI number it doesn't work.
What can I do to get my phone working again? This is very weird. I've had the phone for about 4 months and have flashed many ROMs and kernels and never experienced this.
Any help would be greatly appreciated
Make a backup, flash a TW rom and activate
You cannot activate on any AOSP rom, thats why you were having issues
As to why this happens, idk, it just happens sometimes when flashing roms
CNexus said:
Make a backup, flash a TW rom and activate
You cannot activate on any AOSP rom, thats why you were having issues
As to why this happens, idk, it just happens sometimes when flashing roms
Click to expand...
Click to collapse
Thanks for the reply
Yeah, I managed to find some time at work to sift through some threads and luckily I had a copy of GOODNESS, which is a TW ROM, on my S3, so I flashed that, activated the phone, then reflashed back to PAC Man. Worked perfectly
You can close this thread MODs
Hi, guys im having some issues and would like some expertise. Okay so i have an s4 the model is m919v but the model is unrelated to the problem. I was running custom roms and have been for a few months and i have a phone that has a locked sim. I heard from someone that i can flash an older version of my modem and get the service menu to unlock... point is i did it and it didnt unlock BUT THATS NOT MY ISSUE. I decided to then revert to stock because my phone was being really glitchy after i tried the unlock. Now i restored my phone and got a custom recovery installed a custom rom that was working flawlessly before is now also being glitchy the same way after i tried to unlock it,
These are some glitches im experiencing:
1) phone app is taking a long time to load and it doesnt type in numbers fast
2) when i call someone it just freezes and i cant go to the call screen
3) no notification sounds coming from my phone it just vibrates but doesnt ring
and im sure a few more
IM SURE THESE HAPPENED AFTER I WENT INTO THE SERVICE MENU AND TRIED TO UNLOCK MY DEVICE.
Someone please tell me what i can do to fix this because ive already reverted to stock once.
zee24 said:
Someone please tell me what i can do to fix this because ive already reverted to stock once.
Click to expand...
Click to collapse
You just might want to re-flash the stock rom and before rebooting, clean all the cash and do a factory restore. That should restore the operation to your device.
Only your Pure stock roms will contain any of the modem/boot stuff, if my information is correct.
Aloha and Good Luck!
Hi everyone. I received my very first Android phone a couple of days ago, a Samsung Galaxy Ace 2. I did some research on the Android OS (my phone came with Gingerbread) and I found out about Cyanogenmod. So today, I installed C11 (found it right here http://forum.xda-developers.com/showthread.php?t=2568105) after a lot of sweat and blood... And I got it to run nicely, but I noticed I can't get my network to work. The phone was previously unlocked (I bought it used), and when I first tried my SIM on it, it worked.
When I first had to install CWM in order to be able to install the ROM, I succeeded in rooting it, and I noticed that the phone was still rooted after flashing it (though I don't know if that came along with C11). But anyway, I can't get my network to work; I removed the battery and the SIM a couple of times, but it didn't work. Now I don't know what to do. Could anyone please give me a hand on this? I know nothing about Android. Thanks in advance.
CM11 requires JB (4.1.2) - Sound like you flashed CM11 onto GB (2.3.6)
This can't work.
The thing is that I was trying to install an AOSP ROM (found in these forums as well) before trying with C11, and I wiped the data, formatted the system... So the phone was left without an OS. I didn't just "update" the OS, if you know what I mean. And C11 is working fine except for the mobile network.
EDIT: If I install a clean JB 4.1.2. and then restore to my current CM11, do you think that could solve the network issue?
Again: You need JB! With JB there are also other partitions which are needed to be new (on JB)
And Yes - Data restoring could work - But not recommended.... I would do an clean new install...
Please do not start an discussion... again: You needed JB.. (just to be sure)
Uhm, I never intended to start a discussion, I was trying to explain what I did. Thank you for replying anyway. I'll let you know if I get the network to work.
Sorry - I don't what to sound outrageous... But those questions were asked to many times... Here on XDA ACE 2 section...