I would post this in the development thread however I too noobian to do so. I am able to pair with a bluetooth device but once I turn bluetooth off, I can't connect to that device anymore. Things I've tried:
- initially connecting to BT device and making a phone call from it (confirming initial pairing was successful)
- deleting paired device and reconnecting with the same results
- leaving my BT on in between using the BT the device, however won't reconnect to paired device.
With stock OS I was able to use the BT device and have it automatically connect, I do like having BT as it comes in handy while driving so finding a solution to this would be nice. Is anyone else having this issue with this rom?
Related
I just bought a bluetooth headset (plantronics M50, bluetooth v3.0 with A2DP), the phone call is OK, but when I play video, music, the speaker of phone is on, the headset not work, need additional setup? need addtional apps? how?
You shouldn't need any additional apps. When your phone connects it should connect with two "profiles", one for the phone and one for the audio (A2DP).
In the manual for your headset, does it tell you that you need to switch to a certain mode to hear a2dp audio?
solved, just reboot the phone, and you can chose phone audio or media audio in bluetooth setting interface.
I need bluetooth help please
Ccming said:
solved, just reboot the phone, and you can chose phone audio or media audio in bluetooth setting interface.
Click to expand...
Click to collapse
(NOTE - I WOULD START A NEW TOPIC, BUT CANNOT AS I DONT HAVE ENOUGH COMMENTS TO DO SO).......
Just got a new car (Mercedes Benz GL450), and trying to pair my GN to the bluetooth functionality of the car. First off - the car doesnt even support Bluetooth audio, which was a major disappointment, but it has an ipod dock (yes, it is a 2012 $80,000 truck that doesnt have a usb, or basic features that a freeking $15,000 hyundai). Either way, I can connect my GN to the bluetooth phone feature no problem, it pairs, and automatically connects with no issues. I bought a coolstream A2DP bluetooth receiver (http://www.amazon.com/CoolStream-Bluetooth-Receiver-Speakers-docking/dp/B008EL58YA) to plug into the ipod dock. The GN sees it, i try to pair, enter the password, and it wont connect to it. I have read forums all over the internet about how the GN Bluetooth has many issues - does anyone have a solution??
I read here (http://code.google.com/p/android/issues/detail?id=24012) that i should toggle airplane mode, switch bluetooth on/off, reboot phone, and bluetooth receiver, etc.... it all doesnt work. Tried A2DP Volume - not the issue, it just wont pair after i enter the password.
I am currently rooted on 4.1.1 XenonHD ROM with Franco Kernal, have tried it with 4.1.1 Vicious Jellybean/Faux Kernal as well - no luck.
Going to try it with 4.1.1 AXI0M ROM, and see what happens..................
Has anyone else run into this issue on any other ROM, that can suggest a fix - note - I am good with flashing roms, kernals, mods, etc....but if you ask me to code, i am clueless.
Thanks to anyone that can help
2008 GL450, only old **s 30 pin Sh*t
Tried many sorts to work with steaming...no go so far.
Pre-historic technology was specially installed on GL's....so to leech out more from customers..MB sucks.
Please let me know if you figured something out mean while.
R,
SJ.
QUOTE=UBNAS81;29903783](NOTE - I WOULD START A NEW TOPIC, BUT CANNOT AS I DONT HAVE ENOUGH COMMENTS TO DO SO).......
Just got a new car (Mercedes Benz GL450), and trying to pair my GN to the bluetooth functionality of the car. First off - the car doesnt even support Bluetooth audio, which was a major disappointment, but it has an ipod dock (yes, it is a 2012 $80,000 truck that doesnt have a usb, or basic features that a freeking $15,000 hyundai). Either way, I can connect my GN to the bluetooth phone feature no problem, it pairs, and automatically connects with no issues. I bought a coolstream A2DP bluetooth receiver (http://www.amazon.com/CoolStream-Bluetooth-Receiver-Speakers-docking/dp/B008EL58YA) to plug into the ipod dock. The GN sees it, i try to pair, enter the password, and it wont connect to it. I have read forums all over the internet about how the GN Bluetooth has many issues - does anyone have a solution??
I read here (http://code.google.com/p/android/issues/detail?id=24012) that i should toggle airplane mode, switch bluetooth on/off, reboot phone, and bluetooth receiver, etc.... it all doesnt work. Tried A2DP Volume - not the issue, it just wont pair after i enter the password.
I am currently rooted on 4.1.1 XenonHD ROM with Franco Kernal, have tried it with 4.1.1 Vicious Jellybean/Faux Kernal as well - no luck.
Going to try it with 4.1.1 AXI0M ROM, and see what happens..................
Has anyone else run into this issue on any other ROM, that can suggest a fix - note - I am good with flashing roms, kernals, mods, etc....but if you ask me to code, i am clueless.
Thanks to anyone that can help[/QUOTE]
Hola,
I'm having Bluetooth problems. When I paired my Galaxy Nexus with my car (2012 Passat SE) and with my home phone, I made my phone visible and then told the devices to search for my phone and initiated the pairing from them.
The pairing request popped up on my phone, I typed in the PIN, finished the pairing on the device side, and it worked.
When I'm not connected to these devices, they don't show up in my list of paired bluetooth devices like my bluetooth headset, heartrate monitor, etc do. I put all of those devices into pairing mode and initiated the pairing from my phone, however.
Now, when my phone is in range of these devices and they start up, a pairing request pops up on my phone. I have to type the BT pin in (twice for my car!) before they're paired again. It is not automatic, and is as though my phone has no memory of these devices at all. For my car, every time, I need to tell it that the car can access the phone book.
How can I get the phone to remember these connections so I don't have to type in a PIN every time?
Thanks!
Rob
EDIT: I'm running stock 4.0.4, rooted.
I have used my SGS3 for a while now with the built-in bluetooth phone connection in my car. The first time I used it I had to go through the pairing process, ever since then it automatically connects as soon as I turn on the car. I don't have to touch anything, as long as I have bluetooth turned on it connects.
So, I added a Logitech bluetooth audio receiver to the car http://www.amazon.com/Logitech-Wireless-Speaker-Bluetooth-980-000540/dp/B004VM1T5S
This unit paired with the phone fine, and remembers the pairing. Only problem is every time I turn it on, I have to go to the bluetooth menu on the phone and tap the entry for the logitech adapter to get it to connect. It's a few more steps that I'd like to make this work.
Can anyone suggest a way to my phone to auto connect this pairing?
I know it's uncool to bump your own post, but really........nobody?
Really unsure but try deleting the device from your phone reboot and pair again. All I can think of.
Transmitted with a portable device using Xparent Blue Tapatalk 2
I have the same problem and I have not been able to solve the problem. I am using a Blackberry Bluetooth Stereo Gateway. It would auto connect just fin to my Evo 4G. It will not auto connect on the SIII. If I look at the Bluetooth settings I will see it briefly show Connecting before dropping off when I power up the gateway. It has been this way since I got the SIII. I have only tried the stock ROMs. I am thinking about trying an AOSP ROM to see if it makes a difference.
Hello, I am getting weird problem when using bluetooth devices with my HTC 10 (stock rom)
I bought a bluetooth device with aux-in for my car radio.. That way I only enable BT on my phone and devices connect without problems.
But I also have a small Bluetooth speaker I use when I renovate the apartment (JBL GO).
The problem is when I paired car bluetooth device so it can connect automatically and after that also connected bluetooth speaker this one does not want to connect. If I unpair car bluetooth device, the speaker connect normally.. also if speaker connect and I come down to my car and try to pair to car bluetooth device, it doesnt want to connect/pair... Again if I remove BT speaker from paired devices, car bluetooth device connect normally...
Why is that, anyone knows a solution? Why can I have only one BT device paired with my phone?
Thank you for answers
i have this problem too.
Had this problem myself.
Updated to the latest firmware, rom and kernel.
Currently using cleanslate.
Turn on the BT device, make sure no other BT devices are in the near radius which may confuse it, no wireless devices (I know hard in this day and age)
Turn on BT on your phone, hold it up clearly (not laying down) close all apps, and open the Bluetooth menu.
Click the Bluetooth device to make sure it's ready to pair. Then scan on the phone.
Should start picking it up.
Repeating this and turning the BT device on and off periodically, allowing for several attempts at a time before switching off..
Even really it'll work, perhaps a different rom or kernel combination may help..
I have had this problem, once connected it'll always work and work well. It's odd
Same issue somewhat..I really want to keep this device...i dooooont want to go back to the s7. But on the S7, i could have my Gear S2, Sync and LG Tone all paired at the same time...If i got a call they would all ring and i could answer on whatever device...now if i have the LG on, sync wont find the device. or the phone wont allow for sync to use the Phone, because the S2 is using that feature...what gives? just me?
CrazyCypher said:
Hello, I am getting weird problem when using bluetooth devices with my HTC 10 (stock rom)
I bought a bluetooth device with aux-in for my car radio.. That way I only enable BT on my phone and devices connect without problems.
But I also have a small Bluetooth speaker I use when I renovate the apartment (JBL GO).
The problem is when I paired car bluetooth device so it can connect automatically and after that also connected bluetooth speaker this one does not want to connect. If I unpair car bluetooth device, the speaker connect normally.. also if speaker connect and I come down to my car and try to pair to car bluetooth device, it doesnt want to connect/pair... Again if I remove BT speaker from paired devices, car bluetooth device connect normally...
Why is that, anyone knows a solution? Why can I have only one BT device paired with my phone?
Thank you for answers
Click to expand...
Click to collapse
Do you have another device to try it with? i have had a similar problem, but its just my terrible bluetooth rockford deck causing me grief, and an ebay pill. But it did it with a lg g3 and xperia phone as well. so i chalked it to that
Seems like HTC only allows one bluetooth profile at a time. Like it will only allow one device to use the phone profile or one device use the media profile.
I have to turn off my tone for Sync to connect. Sucks.
I've had this problem since purchasing the HTC 10 about a month ago. My Bluetooth earphones work without issue, but I've been unable to connect to my car or portable speakers (pairs but never connects).
After reading this thread, I unpaired the earphones, cleared all devices, and I was finally able to connect to my portable speaker. So glad I found this topic.
Still, I'm hoping for a fix. I don't want to bother with pairing and unpairing just to connect to a different Bluetooth device.
Similar problem
Hello !
I am having a similar issue!
I have been trying to register and pair my phone with my car's Bluetooth.
Every time I try to pair with my car an error message pops up saying "couldn't pair with Hands Free System because of an incorrect PIN or passkey" except it never even prompted me to enter the passkey...
Things I have already tried:
Resetting network settings
rebooting phone
Factory reset phone
Also , I do not have any other devices paired with my phone.
Any suggestions??
AmandaLS1991 said:
Hello !
I am having a similar issue!
I have been trying to register and pair my phone with my car's Bluetooth.
Every time I try to pair with my car an error message pops up saying "couldn't pair with Hands Free System because of an incorrect PIN or passkey" except it never even prompted me to enter the passkey...
Things I have already tried:
Resetting network settings
rebooting phone
Factory reset phone
Also , I do not have any other devices paired with my phone.
Any suggestions??
Click to expand...
Click to collapse
Had exactly the same problem htc10 would not pair with car bt. changed my passkey on car to 0000 still a valid code and phone paired straight away It was driving me insane trying to make it work. Worth a punt if you can change passkey
hamish707 said:
Had exactly the same problem htc10 would not pair with car bt. changed my passkey on car to 0000 still a valid code and phone paired straight away It was driving me insane trying to make it work. Worth a punt if you can change passkey
Click to expand...
Click to collapse
Thank you, I will give that a shot!
I'm on miui 13 and I have annoying issues, the device's bluetooth which unable to auto connect with car's head unit. The only way out is to unpair then pair them again. That being said, if bluetooth turned off, it can auto connect as long as car's engine still on. That did not happen to miui 12.5 which rapidly auto-connect. Anybody has any idea how to fix this?
BMW NBT?
I also have this problem. With iphone works properly.
I managed to get it fixed by putting the car audio in bluetooth connection mode, go to bluetooth app then toggle allow fullscreen app. In connect state it will disconnect then reconnect. In our case, it'll force connect to nearby previously connected device. That leaves another issue, which is media info won't update. So we kinda stuck with first song info or podcast title, then it won't refresh. Probably due to xiaomi policy to limit data transfer or simply unresolved bug. Luckily I have Samsung device which I use most of the time in this regard.