{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PRESENTS:
ASDK v1.0/ASDK Reborn v2.0
(All-Star Devs Kernel)
BIG THANKS TO AYYSIR FOR LETTING ME TAKE OVER!!
LEARNING as I go.
PLEASE keep thread CLEAN and on TOPIC.
ASDK 4.1.2
Features for 4.1.2 kernel version
Only for AOSP Roms running 4.1.2
Linux kernel 3.0.49
GPU clock to 320MHz
Governors (ABYSSPLUG, BADASS, SUPERBAD,LAGFREE, SLEEPY, SCARY,WHEATLEY, LAZY, ADAPTIVE, INTERACTIVE, PEGASUSQ, CONSERVATIVE, ONDEMAND, USERSPACE, PERFORMANCE)
Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE, ROW, ZEN)
Overclocking & Undervolting
Max OC 1.9ghz (PLEASE DON'T OC TO 1.9 AND EXPECT IT TO BE STABLE THEN COME TO THE THREAD AND COMPLAIN)
Fast Charge
Voltage Control App included [Link to App Thread]
ASDK 4.1.2 Final
DOWNLOADS
ASDK-GS2-4.1-Final-Fixer.zip
Click to expand...
Click to collapse
ASDK 4.2.2 Reborn v2.0
Features for 4.2.2 kernel version
Only for AOSP Roms running 4.2.2
Linux kernel 3.0.74
GPU clock to 320MHz fixed
Governors (FANTASY, SAVAGEDZEN, MINMAX, SLP, ABYSSPLUG, INTELLIDEMAND, ASSWAX, BADASS, SUPERBAD, LAGFREE, SLEEPY, SCARY, WHEATLEY, LAZY, ADAPTIVE, INTERACTIVEX, SMARTASSV2, INTERACTIVE, PEGASUSQ, LIONHEART, CONSERVATIVE, POWERSAVE, ONDEMAND, USERSPACE, PERFORMANCE)
Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE, ROW, ZEN)
Overclocking & Undervolting
Temperature Throttle
Fast Charge
Hotplug
Max OC 1.836ghz (PLEASE DON'T OC TO 1.836 AND EXPECT IT TO BE STABLE THEN COME TO THE THREAD AND COMPLAIN)
Compiled with Linaro 4.7.3 toolchain
I need testers, if it did not boot for me I would not upload it.
These are beta.
DOWNLOADS
ASDK-testing-HERC4.2-04-23-2013.zip
DO NOT RELINK MY KERNELS ON OTHER SITES, NO MIRRORS..
I would suggest people BACKUP and reflash CLEAN, setup (CLEAN ROM), and then Flash my kernel. Leave it at default settings a few hours to settle, and then tweak if you like.
If you Brick your device, kill your sd, or lose data, It's on you. And you probabally shouldn't be on XDA downloading and flashing ROM's and KERNEL's.
Click to expand...
Click to collapse
Credit/Thanks
BIGGEST THANKS TO DAGR8 FOR HIS KKO KERNEL AS IT WAS THE BASE FOR ASDK KERNEL FOR SGS2
Ayysir
Ktoonsez
Imoseyon
Thomas.raines
Krazeecracker
Android88
Ptmr3
Cl3Kener
elbermu
And many, many more.
TESTERS
PJcastaldo
Mycars12
gigoo25
Click to expand...
Click to collapse
IF YOUR GOING TO USE THINGS FROM THIS SOURCE, PLEASE ASK FIRST!!!
Source: https://github.com/thdDude/ASDK-GS2
Reborn - [KERNEL][JB-4.1/4.2][3/25/13] All-Star Devs Kernel: Reborn v1.4
4-12-13
- OC to 1.8 ghz
- Re did Undervolt in code
- Fixed min/max at boot
- ASDK Gov tweaked a bit
Im first!!! LOL . Ive never been first before!
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
Sweet thanks! I'll try this out later but so far the stock PACman kernel has been doing wonders. Hopefully this is the same!
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
Second!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
Reserved
Edit: nvm lmao
Everybody: Enjoy the kernel! You'll love it! This is ayysir's second kernel as a part of the team. He has been working extremely hard on this. Let us know how it is!
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
Am here..
So far so good...all seem well.. Great job guys:thumbup:
ROW scheduler missing
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
Exelent....my friend....:beer::thumbup:
Enviado desde mi SAMSUNG-SGH-T989 usando Tapatalk 2
does this kernel support Capacitive Buttons Backlight changing?
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
The kernel, flashed on all star Rom v7 is working better than I thought, got an extra hour of battery life than lightning kernel. (5 hour with screen on whole time before)
~°~°~°~°~°~°~°~°~°~°~°~°~°~°~°~
Phone: Samsung Galaxy s2 T989 Hercules
Rom: Jedi Jelly 4
Kernel: Insecure Kernel
Radio: LB7 Blaze
~°~°~°~°~°~°~°~°~°~°~°~°~°~°~°~
I am going to try and make an app, if anyone wants help this beautiful talented celebrity in making it just message me!
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
This kernel sends awesome! But rotation is off on slimstar 1.21. I wiped system and caches, installed rom and gapps, rebooted, then went back into recovery to flash kernel. Looking forward for a fix. This doesn't happen with nibbles.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
niccuany said:
This kernel sends awesome! But rotation is off on slimstar 1.21. I wiped system and caches, installed rom and gapps, rebooted, then went back into recovery to flash kernel. Looking forward for a fix. This doesn't happen with nibbles.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
For now just flash the rotation fix.
Sent from my Nexus 4 using xda premium
---------- Post added at 10:03 AM ---------- Previous post was at 10:02 AM ----------
kamilmirza said:
does this kernel support Capacitive Buttons Backlight changing?
Click to expand...
Click to collapse
What do you mean "changing"?
Sent from my Nexus 4 using xda premium
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
First of all ayysir I love you!
And second of all flashing right now =)
Sent from my SGH-T989 using xda premium
android88 said:
For now just flash the rotation fix.
Sent from my Nexus 4 using xda premium
---------- Post added at 10:03 AM ---------- Previous post was at 10:02 AM ----------
What do you mean "changing"?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
can i change the brightness level of capacitive buttons in this kernel?
i dont know if im missing it or what, but abyssplug is not there.
had the rotation problem but it was nothing that fixer couldn't handle.
also, camera lag is still lingering. however, its definitely not as bad as it was. its a lot more bearable. 4 out of 5 pics taken are lagfree.
GOOD WORK, TEAM!
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
kamilmirza said:
can i change the brightness level of capacitive buttons in this kernel?
Click to expand...
Click to collapse
Pretty sure that feature doesn't exist at all for our device.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
Getting sod on SLP gov.
Sent from my SAMSUNG-SGH-T989 using xda premium
corwest said:
Pretty sure that feature doesn't exist at all for our device.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
really?
Re: [KERNEL][JB-4.1][1/22/13] All-Star Devs Kernel
android88 said:
For now just flash the rotation fix.
Sent from my Nexus 4 using xda premium
---------- Post added at 10:03 AM ---------- Previous post was at 10:02 AM ----------
What do you mean "changing"?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Specifically , flash the rotation fix FIXER not just the rotation fix , took me a while to figure this out , loving the kernel!
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PRESENTS:
ASDK v2.0
(All-Star Devs Kernel)
Only for AT&T/TMOBILE variant of SGS3 ATM
Linux kernel 3.4.45
GPU clock to 480MHz
Governors (ASDK, INTELLIDEMAND, SMARTASSH3, WHEATLEY, INTERACTIVE, CONSERVATIVE, ASSWAX, ONDEMAND, USERSPACE, DANCEDANCE PERFORMANCE)
Schedulers (CFQ, BFQ, FIOPS, FIFO, VR, SIO, NOOP, DEADLINE, ROW, ZEN)
Overclocking & Undervolting
Max OC 1.8 ghz
Fast Charge
Fauxsound
S2W [Thanks to Ktoonsez implement]
Other features you will see if you decide to use my project
Linaro 4.7-2013.01-1-2013 for super-fast-mode optimized builds
Only for ASOP Roms running 4.2.2 AFTER 3/19/13
Click to expand...
Click to collapse
FOR LINUX 3.4.x ROMS (COMPILE ON OR AFTER TO 4/19/2013)Size: 8.3 MB
MD5: 4190781d09f767ad1e17f35be5d5c03e
Download Link: http://tinyw.in/icGS
Click to expand...
Click to collapse
Changelog
05-17-13
http://forum.xda-developers.com/showpost.php?p=41534955&postcount=158
04-29-13
http://forum.xda-developers.com/showpost.php?p=40833678&postcount=155
04-20-2013
http://forum.xda-developers.com/showpost.php?p=40522361&postcount=145
04-09-2013
http://forum.xda-developers.com/showpost.php?p=40103722&postcount=143
04-01-2013
http://forum.xda-developers.com/showpost.php?p=39816175&postcount=141
03-30-2013
http://forum.xda-developers.com/showpost.php?p=39761710&postcount=140
03-25-2013 (after 3/19/2013 builds)
http://forum.xda-developers.com/showpost.php?p=39562716&postcount=138
02-24-2013
http://forum.xda-developers.com/showpost.php?p=38402228&postcount=101
02-07-2013
http://forum.xda-developers.com/showpost.php?p=37687943&postcount=60
01-26-13
http://forum.xda-developers.com/showpost.php?p=37232181&postcount=48
Click to expand...
Click to collapse
Thank You for these guys for helping me get through deving this kernel and withstanding my annoying questioning
Xoomdev
Ktoonsez
Imoseyon
anterus
Thomas.raines
Ptmr3
Faux123
Cyanogenmod
Click to expand...
Click to collapse
SOURCE: https://bitbucket.org/ayysir/asdk-sgh-krait/
Click to expand...
Click to collapse
WEBSITE: http://goo.gl/2PxuO
Click to expand...
Click to collapse
Re: [KERNEL][TMO][JB-4.2][1/20/13] All-Star Devs Kernel
I'm first? Sweet..
Sent from my SGH-T999 using Tapatalk 2
Noticed a credit to thomas.raines...one of the devs that made the sgs4g a useful device waaaay beyond it's normal lifespan. An excellent person to learn from.
But more on-topic, this kernel looks interesting. Love having options. What can you tell us about the differences between this and Ktoonsez' kernel? And I'm assuming SetCPU is acceptable as an alternative to voltage control...
Re: [KERNEL][TMO][JB-4.2][1/20/13] All-Star Devs Kernel
P06o said:
Noticed a credit to thomas.raines...one of the devs that made the sgs4g a useful device waaaay beyond it's normal lifespan. An excellent person to learn from.
But more on-topic, this kernel looks interesting. Love having options. What can you tell us about the differences between this and Ktoonsez' kernel? And I'm assuming SetCPU is acceptable as an alternative to voltage control...
Click to expand...
Click to collapse
Yeah man he never turns you down when you ask for help. The differences from Ktoonsez is GPU oc, kernel version updated. And some ramdisk changes that I am working on ATM. Its on my github.
All-Star Kernel coming to Galaxy s3 soon
Re: [KERNEL][TMO][JB-4.2][1/20/13] All-Star Devs Kernel
ayysir said:
Yeah man he never turns you down when you ask for help. The differences from Ktoonsez is GPU oc, kernel version updated. And some ramdisk changes that I am working on ATM. Its on my github. Row scheduler and updated Linux kernel version
All-Star Kernel coming to Galaxy s3 soon
Click to expand...
Click to collapse
All-Star Kernel coming to Galaxy s3 soon
by looking at the source it is a very cool kernel, just like the things i had in mind for my kernel =) at the moment i cant seem to fix a compiler issue but i wanted to ask if you could test something for me. with that being said it a undervolt tweak to the L2 only in the 192Mhz and 384Mhz steps from 1050 to 950, i was checking this tweak back at the n4 kernel development from code aurora so i wanted to as if you could give it a try.
chago123 said:
by looking at the source it is a very cool kernel, just like the things i had in mind for my kernel =) at the moment i cant seem to fix a compiler issue but i wanted to ask if you could test something for me. with that being said it a undervolt tweak to the L2 only in the 192Mhz and 384Mhz steps from 1050 to 950, i was checking this tweak back at the n4 kernel development from code aurora so i wanted to as if you could give it a try.
Click to expand...
Click to collapse
how do you compile? look at my build script in my source. thats what i use to compile. any link to the tweak commit?
here is the link to the commit https://github.com/bhanvadia/lge-mako-kernel/commit/83fba02daa40a9abca1659870b5af2c3d833dfcb
and ill be taking a look at your build script as soon as possible. thanks
Re: [KERNEL][TMO][JB-4.2][1/20/13] All-Star Devs Kernel
ayysir said:
Yeah man he never turns you down when you ask for help. The differences from Ktoonsez is GPU oc, kernel version updated. And some ramdisk changes that I am working on ATM. Its on my github.
All-Star Kernel coming to Galaxy s3 soon
Click to expand...
Click to collapse
The reply is appreciated. And I'm definitely giving this a spin. Thanks for the hard work!
Sent from my SGH-T999 using xda premium
P06o said:
The reply is appreciated. And I'm definitely giving this a spin. Thanks for the hard work!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
np man
Re: [KERNEL][TMO][JB-4.2][1/20/13] All-Star Devs Kernel
Does the Ktweaker app work with this?
If no, is there any other way to change vibration intensity?
Re: [KERNEL][TMO][JB-4.2][1/20/13] All-Star Devs Kernel
Sammydr10 said:
Does the Ktweaker app work with this?
If no, is there any other way to change vibration intensity?
Click to expand...
Click to collapse
Ktweaker is Ktoonsez app so likely no since I made my kernel from scratch using cm stock.
I'll look into a app to increase vibration but I don't see why you need to make vibration more than it really is
All-Star Kernel coming to Galaxy s3 soon
Re: [KERNEL][TMO][JB-4.2][1/20/13] All-Star Devs Kernel
ayysir said:
Ktweaker is Ktoonsez app so likely no since I made my kernel from scratch using cm stock.
I'll look into a app to increase vibration but I don't see why you need to make vibration more than it really is
All-Star Kernel coming to Galaxy s3 soon
Click to expand...
Click to collapse
You part of android88 and tmogalaxys2 team?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
jookdakang23 said:
You part of android88 and tmogalaxys2 team?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
yeap i am
Re: [KERNEL][TMO][JB-4.2][1/20/13] All-Star Devs Kernel
Installing now on illusion v18 will report later!
Re: [KERNEL][TMO][JB-4.2][1/20/13] All-Star Devs Kernel
Sammydr10 said:
Does the Ktweaker app work with this?
If no, is there any other way to change vibration intensity?
Click to expand...
Click to collapse
No, for sure, because ktoonez's app looks for certain things that only his kernel has. And I don't know about your second question.
Sent from my SGH-I747 using Tapatalk 2
Re: [KERNEL][TMO][JB-4.2][1/20/13] All-Star Devs Kernel
rani9990 said:
No, for sure, because ktoonez's app looks for certain things that only his kernel has. And I don't know about your second question.
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Yeap exactly correct, looking into making my own app but that's tons of learning and work AND time
All-Star Kernel coming to Galaxy s3 soon
ayysir said:
Ktweaker is Ktoonsez app so likely no since I made my kernel from scratch using cm stock.
I'll look into a app to increase vibration but I don't see why you need to make vibration more than it really is
All-Star Kernel coming to Galaxy s3 soon
Click to expand...
Click to collapse
I dont...
I wanna make it less
how do you use fast charge ?
jookdakang23 said:
You part of android88 and tmogalaxys2 team?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Yup, he's our kernel guy
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DeviantKernel This Kernel Is Compatible with all TW/Samsung based JB ROMS for this device--- (Not AOSP)
READ, READ, READ before downloading, flashing, or posting questions
Not all phones are created equal meaning some phones will not handle Overclocking or Undervolting as well as others.
Features
Code:
Updated Linux Kernel Version 3.0.63
Built with Linaro 4.7
OC - 1944Mhz
UV
GPU
Added Govs
-Lulzactive
-SmartassV2
-Pegasusq
-Abyssplug
-Lagfree
-Virtuous
Added Sched
-Zen
-Sio
-Row
Module.c edit to begin Exfat support (in the works)
Deadline sheduler edits
Sched Compute time optimization
Advanced Power Emulation
Boot Animation Support
Github
In my GITHUB you can find my sources and code changes
Credits
Samsung for Official Source Code
Gregkh
Gokhanmoral
imoseyon
Faux123
Ktoonsez
task650
showp1984
sbreen94
Instructions
TWRP Recovery HIGHLY Recommended!
-Download Kernel
-Nandroid
-Flash Kernel
-Boot system and DO NOT TOUCH FOR 2-3 MIN
Changelog
Code:
2|15--
Linux 3.0.63!
2|12--
Update to Linux Version 3.0.62
mpdecision Overhaul (showp1984)
Edits to sched.c
OC Freq Edits!
- No more issue with sticking/ settings not sticking
- Lowered Max OC but with better performance than 1988
Better Battery Managment
More responsive
Lower Temp
2|1--
Remove Gentle_fair_sleepers (Better Performance)
Optimizations to Interactive
Revert Edits to Core behavior
2|1--
Linux 3.0.61
Added
-Abyssplug
-Lagfree
-Virtuous
Total Interactive Overhaul
Conservative Edit
SmartassV2 Edit for better battery
Charge Current Interface && Default Charge Current Increased
1|28--
Added 192 as Min Freq
Upped OC to 1988
Voltage Edits
-Complete Pegasusq Overhaul
Added Schedulers
-Zen
-Sio
-Row
1|25--
Initial Release
HTML:
Note To Donators!
Every donation is more than appreciated! To show my appreciation for my
supporters, I will now begin listing every Donator in the OP as a special
thank you.
THANK YOU
Special Thanks To The Following Supporters Of This Kernel
*Akapaul26
* Steely123
Downloads
My Recommended Settings: Pegasusq Gov & Either Zen or CFQ Scheduler
DeviantKernel_06-- Download
Read About Some Different Governors HERE
If you dont find one you are looking for there, Google is a GREAT tool
mine
Mine. Well this seems interesting.
Sent from my SPH-L710 using Tapatalk 2
Nice another kernel! Looking forward to trying it out!
Sent from my SPH-L710 using xda app-developers app
Going to try kernel on goodness 8.0.5 will let you all know how it is... Thanks for the new kernel
Sent from my SPH-L710 using xda premium
If you dont mind me asking what is your GPU OC set at? Or is it at stock? Just curious as I was going over OP. Will def check out this kernel either way. Appreciate the work and the contribution.
ill give it a spin
Cool something new!!! Much appreciated!
Sent from my SPH-L710 using Tapatalk 2
Love seeing a new kernel. I'm on it. Much tks!:thumbup:
Sent from my SPH-L710 using Tapatalk 2
Any reccomendations for a kernel tunning app for this kernel??
Going to try this out
Whenever I try and change the governor in setcpu my phone freezes and reboots... TN MA4.1.2 stock rom
Sent from my SPH-L710 using xda app-developers app
Thanks for this!! :good:
Somehow my rotation got flipped with this kernel -.- lol
Sent from my SPH-L710 using xda app-developers app
twister99403 said:
Money to support that guy. No thanks. There are better free ones
sent from my anthrax ROM/kernel s3
Click to expand...
Click to collapse
then at least offer up a suggestion as the the original poster was asking...don't just drop a criticism of a developer and walk out.
https://play.google.com/store/apps/details?id=com.darekxan.voltagecontrol&feature=search_result
https://play.google.com/store/apps/details?id=rs.pedjaapps.KernelTuner&feature=search_result
https://play.google.com/store/apps/...DEsIml0LnNpbmVvLmFuZHJvaWQubm9GcmlsbHNDUFUiXQ..
ImEVO said:
Efff that...
Thanks..
Click to expand...
Click to collapse
Next time pm me, no need for this type of non-productive stuff here. You are a veteran in these posts and should know better. And, again, another post that does not offer a suggestion to the query about kernel or cpu tuners.
So, here is another option for the person who asked...
https://play.google.com/store/apps/details?id=ccc71.pmw
Sent from my SPH-L710 using Tapatalk 2
Thread cleaned
If you do not have something contributing to say then DON'T POST
I will be watching this thread now
Users causing trouble will be infracted/banned...period!
I am sick of this crap
You all think it is so easy PLEASE make your own kernel and enjoy it
Thank you for your cooperation
Friendly Neighborhood Moderator
I did experience the rotation bug w latest kernel and odex blue. Even my camera flipped... Other than that seemed really fast.
Sent from my SPH-L710 using Xparent BlueTapatalk 2
For those that like to come here from that other site and cause trouble
You should know that an agreement has been reached to permban troublemakers from both sites by NiN and myself
If you do not have a bug report or a post to contribute to further development then do not post
Thank you for your cooperation
Friendly Neighborhood Moderator
This kernel is working great for me on Stock Jellybean 4.1.1 rooted and running MA6 Modem/Radio update
I was running AGAT 0.3.3 and then tried this one - very smooth and no issues so far - can't tell battery life yet
I couldn't get KToonsez kernel working on my phone - not sure why but Deviant seems to be very nice so far!
--------------------------
Edit: Ok yeah, I do see how when you turn the phone to the right or left (sideways) the display is upside down.
Sprint phone (not Verizon) so that might be the issue - only one I've seen. I usually use the phone upright anyway so not a big deal to me.
THIS PROJECT IS NO LONGER ACTIVE
THERE WILL BE NO FURTHER UPDATES
Firstly, huge thanks go to these individuals & teams (for code I have kanged, ideas I have been inspired by, help I have received):
Pawitp, Stratosk, DerTeufel, Kasper_h, Ezekeel, Neldar, Mialwe, Edoko, and my testers kaza and saszseb
THANK YOU ALL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a clone of my well-established non-LVM kernel but it has been turned to the Dark Side of mainstream partitoning!
It should work on all Android 4.2 ROMs that use the LVM (Logical Volume Manager) partition method, like Official CM 10.1
All kernel features (with the exception of RAM size - note below) can be activated/adjusted using NSTools
Changelog 08/05:
Code:
+ FINAL RELEASE
+ Linux 3.0.76
+ LMK Whitelisting (thanks to Stratosk)
+ USB OTG Support
Downloads:
KERNEL FOR RECOVERY
KERNEL FOR ODIN/HEIMDALL
KERNEL MIRROR
(modified NSTools included in Kernel package)
Fishears Kernel customisations:
Kernel 3.0.76
Ultra Kernel Samepage Merging
Live OC
Overclock @ 1400, 1300, 1200, 1100
Aroma Filemanager (1.80) in Recovery
Kernel compiled with Linaro 4.7-2013.03 + O3 optimization
RAM Size selectable through sysfs (see note below). 383mb (default), 396mb (bigmem), 409mb (hugemem - breaks 720p video recording so set camera to 480p before reboot)
Media libs automatically patched at reboot when RAM Size changes
720p recording option removed from camera settings in hugemem mode (thanks Kagadar)
CPU unaligned accesses enabled
LowMemoryKiller Whitelist support
[*} USB OTG Host Support
Deep Idle
BLN 9
FastCharge
Touch Wake
Battery Life eXtender
Battery polling reduced
Smartassv2 governor
Lulzactive governor
Lazy governor
Wheately governor
IntelliDemand governor
Interactive governor tweaks from 3.4
SIO I/O Scheduler (updated)
ROW I/O Scheduler
BFQ I/O Scheduler
ZEN I/O Scheduler
FIFO I/O Scheduler
tuned CFQ Scheduler
LOAD_FREQ (4*HZ+61) avoids loadavg moire
Logger from 3.4
Neon VFP enabled
Lowmemorykiller from 3.5
Time gpio from 3.4
Battery indicator in Recovery
Clear NSTools settings from Recovery
Clear init.d from Recovery
Touch key control in Recovery (Menu=up, Back=down)
Repeat on keys for up/down in Recovery
RAM Selection:
the RAM selection values are:
0 for default
1 for 396mb
2 for 408mb
To change the current setting you need to change the value stored in /sys/kernel/bigmem/enable
You can do this with a text editor or in a terminal/adb shell like this:
Code:
echo 2 > /sys/kernel/bigmem/enable
Source Code:
fishears at github
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs
1st. Now to test. So are we going to see fishears rom lvm soon too?
Sent from my GT-P7500 using xda app-developers app
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs
Thank you fishears.
Sent from my GT-I9300 using xda premium
ts1506 said:
1st. Now to test. So are we going to see fishears rom lvm soon too?
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
I pressed "submit" instead of "preview"
The post is a bit unfinished still...
An LVM ROM might happen
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
I guess i found a suitable kernel for my future lvm roms too.
The only issue i am facing is that when i tne ondemand through nstools, the sampling down factor is not sticking, whereas it sticks on semaphore with semaphore manager.
Sent from my GT-P7500 using xda app-developers app
---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------
fishears said:
I pressed "submit" instead of "preview"
The post is a bit unfinished still...
An LVM ROM might happen
Click to expand...
Click to collapse
Why. What did you miss out?
Hope a lvm rom comes out too.
Sent from my GT-P7500 using xda app-developers app
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
Didn't see any Mention of auto brightness in the line up of features so am wondering if the kernel supports that and how to turn it on. Thanks for the great developmental work you are doing.
Sent from my GT-N7100 using xda premium
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
ugoms said:
Didn't see any Mention of auto brightness in the line up of features so am wondering if the kernel supports that and how to turn it on. Thanks for the great developmental work you are doing.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Auto brightness is a rom feature. Turn it on from settings, display, brightness
Sent from my GT-P7500 using xda app-developers app
ugoms said:
Didn't see any Mention of auto brightness in the line up of features so am wondering if the kernel supports that and how to turn it on. Thanks for the great developmental work you are doing.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
If you don't see it in the list then I don't have it
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
Easy boss, just asking no disrespect
Sent from my GT-N7100 using xda premium
ugoms said:
Easy boss, just asking no disrespect
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
it was typed with a big smile - sorry - I don't know what the cowboy means, is it bad? I thought it was funny...
Re: [KERNEL][4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
Already downloaded. Thanks again man.
Sent from my GT-N7100 using xda premium
Once again, thank you very much for your hard work in making this LVM version of your kernel and for letting me test the beta :good:
I'm facing the same problem that @ts1506, sampling down factor its not sticking with NSTools neither with init.d, this is the only problem I had so far
Re: [KERNEL] [4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
kaza said:
Once again, thank you very much for your hard work in making this LVM version of your kernel and for letting me test the beta :good:
I'm facing the same problem that @ts1506, sampling down factor its not sticking with NSTools neither with init.d, this is the only problem I had so far
Click to expand...
Click to collapse
Yes, I'll look into it
Sent from my GT-I9000 using Tapatalk 2
Re: [KERNEL] [4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
ts1506 said:
I guess i found a suitable kernel for my future lvm roms too.
The only issue i am facing is that when i tne ondemand through nstools, the sampling down factor is not sticking, whereas it sticks on semaphore with semaphore manager.
Sent from my GT-P7500 using xda app-developers app
---------- Post added at 02:34 PM ---------- Previous post was at 02:32 PM ----------
Why. What did you miss out?
Hope a lvm rom comes out too.
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
Download Semaphore Manager and change it! After reboot it'll be stick.
Sent from my GT-I9000 using Tapatalk 2
I have a question that its not really related to this kernel but I hope that someone can help me, so my phone can handle 1200mhz with 1300mV / 1125mV set in 1200mhz step, and can run at 110% live oc with stock voltage. If I want to run 110% live oc with 1100mhz normal OC to reach 1210mhz where should I set the 1300mV / 1125mV in the 1200mhz step or 1100mhz step, I really dont know
kaza said:
I have a question that its not really related to this kernel but I hope that someone can help me, so my phone can handle 1200mhz with 1300mV / 1125mV set in 1200mhz step, and can run at 110% live oc with stock voltage. If I want to run 110% live oc with 1100mhz normal OC to reach 1210mhz where should I set the 1300mV / 1125mV in the 1200mhz step or 1100mhz step, I really dont know
Click to expand...
Click to collapse
To 1100MHz step, cause live oc makes 1100 -> 1210.
Ynt: [KERNEL] [4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [22/02/13]
İs this kernel for inand like your rom?
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
I've just uploaded a new build that fixes the ondemand sampling down factor setting - see startpost
tivac said:
İs this kernel for inand like your rom?
GT-I9000 cihazımdan Tapatalk 2 ile gönderildi
Click to expand...
Click to collapse
This kernel is for moviNAND (with LVM partition)
Re: [KERNEL] [4.2] FISHEARS-LVM for all LVM partitioned 4.2 ROMs [23/02/13]
Not only for MoviNand!
Sent from my GT-I9000 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
READ, READ, READ before downloading, flashing, or posting questions
YOU are responsible for what you do to your phone, not me.
Not all phones and chips are created equal meaning some phones will not handle Overclocking or Undervolting as well as others.
A big thanks goes out to my friend and teammate ptmr3. This kernel would not be possible without him! :highfive:
Zeus Kernel Features:
Code:
[SIZE="4"][CENTER][FONT="Trebuchet MS"]
Compatable with Samsung Touchwiz JB roms
Linux Kernel Version 3.0.66
Built with Linaro Toolchain 4.4.3
Overclock to 1.62ghz
Underclock to 192mhz
Undervolted
GPU OC
CRT- TV off animation Support
Fast Charge Support
Dynamic Sync Control
Added modules to begin exFAT support
Disable Kernel logging for performance
Advanced Power Emulation
Custom Boot Animation Support
Added and Tweaked Governors
-Lulzactive
-SmartassV2
-Pegasusq
-Abyssplug
-Lagfree
-Conservative
-Intellidemand
-Userspace
Added Schedulers
-Zen
-Sio
Defaulted CFQ as default scheduler
Deadline sheduler edits
FAST
Smooth
Battery Life[/FONT][/CENTER][/SIZE]
In my GITHUB you can see my Source edits for this kernel!!
Install Instructions
TWRP Recovery Recommended!
-Download Kernel
-Nandroid
-Flash Kernel
-Boot system and DO NOT TOUCH FOR 2-3 MIN
Downloads
Zeus Kernel V3
Credits
Samsung for Official Source Code
ptmr3
imoseyon for fast charge code
djintrique808
Faux123
Ktoonsez
Older Builds
Zeus Kernel V1
Zeus Kernel V2
ROM Developers- You are more than welcome to use this kernel in your rom, just throw me some credit in your OP, Thanks!
Hit the THANKS :good: button or consider a Donation if you like my work!
Changelog
V1 -3/25/13
Initial Public Release!
v2 4-3/13
Actual OC to 1.62ghz
Cleaned up some code and commits
Voltage tweaks
v3 Divine 4/17/13
Updated to Linux version 3.66
A bit of code cleanup
Added CRT-TV off animation support
Added scheduler fixes
Added Dynamic Sync Control
Added Modules and code to begin exFAT support
Added Fast Charge support (cred imoseyon)
For Best Battery Life I recommend Pegasusq Governor and CFQ or ZEN scheduler. You can READ more about other Governors HERE
Enjoy everyone!!
Re: [KERNEL][SPR][3/25/13] ZEUS Kernel_v1 -TW- [Deviant Development]
Guess first been wanting to try a new kernel.
Sent from my Samsung Galaxy S3 using Tapatalk 2
---------- Post added at 10:05 PM ---------- Previous post was at 09:36 PM ----------
Having horizontal viewing issue. The picture always show away from me.
Wasn't this a problem you guys had before with this kernel?
Sent from my Samsung Galaxy S3 using Tapatalk 2
Re: [KERNEL][SPR][3/25/13] ZEUS Kernel_v1 -TW- [Deviant Development]
CyberGmonster said:
Guess first been wanting to try a new kernel.
Sent from my Samsung Galaxy S3 using Tapatalk 2
---------- Post added at 10:05 PM ---------- Previous post was at 09:36 PM ----------
Having horizontal viewing issue. The picture always show away from me.
Wasn't this a problem you guys had before with this kernel?
Sent from my Samsung Galaxy S3 using Tapatalk 2
Click to expand...
Click to collapse
Tried it and was smooth but watch too many videos so that's a breaker for now..but great work smooth as butter
Sent from my SPH-L710 using Tapatalk 2
Re: [KERNEL][SPR][3/25/13] ZEUS Kernel_v1 -TW- [Deviant Development]
Yup. I did notice the extra butter lol. Only wish the screen wasn't screwed. Just like you I watch tons of vids so it's definitely an issue.
Sent from my Samsung Galaxy S3 using Tapatalk 2
Re: [KERNEL][SPR][3/25/13] ZEUS Kernel_v1 -TW- [Deviant Development]
CyberGmonster said:
Yup. I did notice the extra butter lol. Only wish the screen wasn't screwed. Just like you I watch tons of vids so it's definitely an issue.
Sent from my Samsung Galaxy S3 using Tapatalk 2
Click to expand...
Click to collapse
Dude me too but I was gonna change but for now I'll ride it out. Too smooth
Sent from my SPH-L710 using Tapatalk 2
Re: [KERNEL][SPR][3/25/13] ZEUS Kernel_v1 -TW- [Deviant Development]
I'm open to try new things and support, just curious any under clocking or undervolting with this kernel?
Sent from my rooted, suited, and booted SGSIII livin the dual-core life, know dat
tony45x220 said:
I'm open to try new things and support, just curious any under clocking or undervolting with this kernel?
Sent from my rooted, suited, and booted SGSIII livin the dual-core life, know dat
Click to expand...
Click to collapse
Its already undervolted, but underclocking should be there
Re: [KERNEL][SPR][3/25/13] ZEUS Kernel_v1 -TW- [Deviant Development]
tony45x220 said:
I'm open to try new things and support, just curious any under clocking or undervolting with this kernel?
Sent from my rooted, suited, and booted SGSIII livin the dual-core life, know dat
Click to expand...
Click to collapse
Dude no offense but did you read? Answer is right there
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 11:05 PM ---------- Previous post was at 10:58 PM ----------
sbreen94 said:
Its already undervolted, but underclocking should be there[/QUOTE
This being a Verizon kernel hence why the screen rotation issue, quick question any chance of an actual Sprint version?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
kaos1211 said:
Dude no offense but did you read? Answer is right there
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 11:05 PM ---------- Previous post was at 10:58 PM ----------
sbreen94 said:
Its already undervolted, but underclocking should be there[/QUOTE
This being a Verizon kernel hence why the screen rotation issue, quick question any chance of an actual Sprint version?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, i can look at doing one for you guys! Wonder why that causes the rotation to be off...
Click to expand...
Click to collapse
Re: [KERNEL][SPR][3/25/13] ZEUS Kernel_v1 -TW- [Deviant Development]
sbreen94 said:
kaos1211 said:
Dude no offense but did you read? Answer is right there
Sent from my SPH-L710 using Tapatalk 2
---------- Post added at 11:05 PM ---------- Previous post was at 10:58 PM ----------
Yeah, i can look at doing one for you guys! Wonder why that causes the rotation to be off...
Click to expand...
Click to collapse
That would be awesome!!!
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Re: [KERNEL][SPR][3/25/13] ZEUS Kernel_v1 -TW- [Deviant Development]
Great other than the rotation issue
Sent from my SPH-L710 using xda app-developers app
Updated Kernel to V2 Some cool new stuff so check it out! I havent had time to compile from sprint source code for you guys but hopefully will soon!!!
Enjoy
Is there/ will there be exfat support?
Was the screen rotation fixed
Sprint handles kernel rotation differently than the rest of the carriers. Until sbreen compiles from source, landscape will be upside down. The performance of this kernel is a monster, though.
Sent from my SPH-L710 using Tapatalk 2
Ascertion said:
Sprint handles kernel rotation differently than the rest of the carriers. Until sbreen compiles from source, landscape will be upside down. The performance of this kernel is a monster, though.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
It really is.
Sent from my SPH-L710 using xda premium
Has the rotation issue been fixed? I woukd love to give this another shot
Sent from my SPH-L710 using Xparent ICS Blue Tapatalk 2
This should work on d2att right?
Flashed it on my d2att and its been fine, but reboots on abyssplug and pegasusq. Are there any files that need to be deleted like mpdecision to fix that?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SaberN3Kernel This Kernel Is Compatible with all TW/Samsung based JB ROMS for this device--- (Not AOSP)
READ, READ, READ before downloading, flashing, or posting questions
Not all phones are created equal meaning some phones will not handle Overclocking / Underclocking or Undervolting as well as others.
So far this is tested and working on:
(SD 800 Processor N3 Only!!)
SM-N900T
SM-N9005
SM-N900W8
Features
OC to 2.649GHz
UC to 266MHz
Kernel Version 3.4.75
UV Support to 700
Advanced Power Emulation
Default Scheduler= Row
Default Governor= Ondemand
Default boot set to 2..3Ghz (2.2656)
Built using arm 4.7 toolchain
Touchwake
CPU Boost Driver
Init.d
Ramdisk Mods
- Temporary patch solution for wifi, forcing change in build.prop (Jovy23)
- SELinux= Permissive
- Insecure (Remount not yet online)
Exfat Supported
Added Schedulers:
-FIOPS
-ZEN
-SIO
Edits to DEADLINE for better performance
Added Gov:
-Wheatley
USB FastCharge (USB Charges at AC level)
Faux's Overall Stats for quad core devices (This will show overall CPU frequency statistics via sysfs.)
Faux's CPU Freq Limiter (This driver limits MSM CPU frequency through sysfs file system)
More...
Github
In my GITHUB you can find my sources and code changes
Credits
Samsung for Official Source Code
Xiaolu
Faux123
DoomLord
danieljamie
dormanx
Jovy23
markbencze
livlogik
Imoseyon
Yank555!
Instructions
TWRP Recovery HIGHLY Recommended!
-Download Kernel
-Flash Kernel
-Boot system and DO NOT TOUCH FOR 2-3 MIN
Changelog
Code:
12|23--10.7
There have been many Jedi Elite exclusive versions of Saber so this is a catch up Changelog
-Upgraded to to 3.4.75!
-Touch Wake Implementation Thanks to Yank555!! (will drain battery faster)
-CPU boost driver thanks to Yank555 and Saravana Kannan
-Voltage Modifications
-Removed ifdefs. Unified kernel now
-Edits to Defconfigs
-Dropped bottom freq to 266mhz
-Voltage mods for STABILITY ;)
-Thermal edits
-Edits to Defconfigs
10|25-- 5.2
Patched All the way up to 3.4.67!! (Imoseyon responsible for patches from 3.4.6-3.4.66)
Cores should now all behave as instructed
ALOOTT of voltage work, we can now ALL Run with a RED Saber!!!
Thermal edits
Edits to Defconfigs
Ramdisk edits to improve USB connection Recognition
10|16-- 3.0
3 different kernel choices
-Green = No OC + All Features
-Yellow = OC to 2.5 + All Features
-Red= OC to 2.7 + All Features
Added Schedulers:
-FIOPS
-ZEN
-SIO
Edits to DEADLINE for better performance
Added Gov:
-Wheatley
USB FastCharge (USB Charges at AC level)
Faux's Overall Stats for quad core devices (This will show overall CPU frequency statistics via sysfs.)
Faux's CPU Freq Limiter (This driver limits MSM CPU frequency through sysfs file system)
10|15-- 2.3
-Dropped UV limit
-Work with cpu
10|15-- Initial Release (See Features List)
Downloads
READ BEFORE DOWNLOADING
SaberN3Kernel_Red-10.7
http://d-h.st/znG
Support this Development By clicking this Button,,, Thank you
http://forum.xda-developers.com/donatetome.php?u=4488450
Guide to Thread Participation":
Generally speaking, we are a pretty calm group of people, but as with so many other things in life, there are those that evoke a negative response from the very start. THAT is why we are such believers in maintaining a polite, respectful thread. Most everyone here is eager to help, and the only thing we ask is (despite the associated tedium) read the entire thread, it can only help. If and when you are still stuck, feel free to ask questions, we're all here to help one another.
--TMobTim
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
XDA:DevDB Information
|KERNEL| SaberN3Kernel_10.7 || 3.4.75 || OC for all || exFAT | 12|23, a Kernel for the T-Mobile Samsung Galaxy Note 3
Contributors
ptmr3
Kernel Special Features:
Version Information
Status: Stable
Created 2013-10-15
Last Updated 2013-12-23
mine
Great work as always bro. Killing it already!
Sent from my SM-N900W8 using Tapatalk now Free
Very nice work done, looking forward to using this when I get my note 3.
Sent from my note 2 ya bish!
You are the man, again!
Sent from my SM-N900T using Tapatalk now Free
Downloading now!!! Thank you for your hard work and support of the Note 3 :thumbup:
Sent from my SM-N900T using XDA Premium 4 mobile app
Thanks for for the Beast, banging on it right now:good:
Woot!
Sent from my SM-N900T using Tapatalk
Nice downloading now. Thanks once again ptmr3
Sent from my SM-N900T using Tapatalk
Installed fine with darthstaker rom wifi seems to be working great as well. Thanks for the kernel. Looking forward to a rom son too hopefully .
Edit: it seems that using an app like trickster mod to put the max cpu at say 1.3ghz only caps cpu 1. Cpu2,3,4 still go to 2.5ghz. Anyone else have this problem?
Sent from my SM-N900T using Tapatalk
For uv do we need trickster mod, or should setcpu work?
Sent from my SM-N900T using Tapatalk
Nice to see you around ptmr3. Been looking forward to seeing you post in here.
Sent from my SM-N900T using XDA Premium 4 mobile app
Admiral2145 said:
For uv do we need trickster mod, or should setcpu work?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Trickster will flash right in along with the kernel. One of the best apps for kernel control available IMO
Admiral2145 said:
For uv do we need trickster mod, or should setcpu work?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I usually try to stick with what the Dev uses, in this case I'm fairly certain it's Trickster, but to each his own.. Let us know either way you go what kind of results you're getting.. :thumbup:
Sent from my SM-N900T using XDA Premium 4 mobile app
This one will not go lower than 800 on voltages. Have a more aggressive kernel testing now
Sent from my SM-N900T using xda app-developers app
ptmr3 said:
This one will not go lower than 800 on voltages. Have a more aggressive kernel testing now
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
so i assume we need to wipe cache and dalvik correct? thats what i always did for kernels.
So much smoother, the responsiveness is better, not just blowing smoke. My floating toucher app is actually working flawlessly now, it would be unresponsive to my first touch half the time, now no issues .. I'm pretty happy already and I haven't done any tweaking.. So happy you're working on this device
Sent from my SM-N900T using XDA Premium 4 mobile app
XxLostSoulxX said:
so i assume we need to wipe cache and dalvik correct? thats what i always did for kernels.
Click to expand...
Click to collapse
Not necessary but you can if you want
Sent from my SM-N900T using xda app-developers app
ptmr3 said:
This one will not go lower than 800 on voltages. Have a more aggressive kernel testing now
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
When i load up tickster it shows everything from 576mhz and lower at 775. This is the default that loads for me? is it going to that or is it only really at 800.
Prod1702 said:
When i load up tickster it shows everything from 576mhz and lower at 775. This is the default that loads for me? is it going to that or is it only really at 800.
Click to expand...
Click to collapse
It is that low, but if you go to change them, they will default to 800. I will have a fresh one up in maybe an hour
Sent from my SM-N900T using xda app-developers app