Related
How to update your rom to the latest I-mate version (with push email) and Radio 1.09.0 using the MaUpgradeUt_noID.exe method
1 – download the file “Universal_Upgrade_v1.30.68_radio_1.09.0.zip” from the ftp site (see bottom of post for details)
2 - double click the file and allow it to unpack into a folder
3 – right click on the active sync icon in your tasks tray on you pc (at the stage you should NOT have you universal plugged in)
4 – select connection setting then untick “allow USB connections”
5 – Now take your Universal and take out the SIM and MEMORY CARD
6 – Press light + power + reset with the phone on, this will place the universal into bootloader mode
7 – Connect your Universal via the USB cable to your computer directly i.e. not though a USB hub
8 – Now double click on the program called “MaUpgradeUt_noID.exe” (found in to folder from step 1) this will start the upgrade process, the first stage takes about 3 to 5 minutes to complete, you will then be presented with a screen showing a “Imate Jam” and some information about what you are upgrading to, don’t be worried if this screen does not show you the version numbers you have at present that is normal.
9 – Now continue with the process by clicking upgrade/next
10 – After sometime (about 20 minutes) you should be at the end screen tell you to unplug and reset you “jam” So now unplug your universal and reset it and that’s all there is to it!
Note that during the upgrade process you can follow the progress by also looking at your universal screen with a light source as the backlight will be off.
I hope this post helps someone as looking around the forum Im amazed by the amount of people asking “how do I upgrade my rom” or “I only get a “country id error” when trying to update”
The “Universal_Upgrade_v1.30.68_radio_1.09.0.zip” file can be found here
ftp://xda:[email protected]/Uploads/Universal/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
This file contains the latest imate beta rom v1.30.68 and the latest radio 1.09.0 plus all the tools you need
Oh and if anyone thinks Ive missed something out please post and let me know!
File as been moved its now at :-
ftp://xda:[email protected]/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
This file contains everything need to upgrade your universal
Thanks rat - very cool of you to post up a guide. How Nb is it to remove your SIM?
wamatt said:
Thanks rat - very cool of you to post up a guide. How Nb is it to remove your SIM?
Click to expand...
Click to collapse
No sure I understand the question however Ive updated before now with the sim card in however lots of people report that its important to remove both the memory & sim cards so Ive included it because its better to be safe than sorry
Thanks I'll play it sorry :/..
BTW do you have to use this NOID method if you have an IMATE too?
wamatt said:
BTW do you have to use this NOID method if you have an IMATE too?
Click to expand...
Click to collapse
No you should be ok using the orginal package, however this way will still work
I installed the ROM but after the installation is finished and I reset the device I only get a blank screen.
Piesang said:
I installed the ROM but after the installation is finished and I reset the device I only get a blank screen.
Click to expand...
Click to collapse
Blank screen but do you have the USB or SERIAL written on the Screen?
Rat didn't mention in his post but it comes out in the last screen that it is supposed to be a HARD RESET which will bring about a menu where you have to press 0 (Zero) to ahrd reset the device. hope this helps
Yip, sorry, That's correct. I get the screen that says I have to press 0 to reset or X to exit.
If I press 0 the screen goes blank and stays like that.
I've installed the previous ROM now and it is working perfectly. It's just the new ROM on this page doesn't want to work on my Jasjar.
Piesang said:
Yip, sorry, That's correct. I get the screen that says I have to press 0 to reset or X to exit.
If I press 0 the screen goes blank and stays like that.
I've installed the previous ROM now and it is working perfectly. It's just the new ROM on this page doesn't want to work on my Jasjar.
Click to expand...
Click to collapse
I downloaded it straight from the first post and it installed flawlessly...
Have you tried installing it from bootloader mode instead of direct update? And without SD card in the PDA? This might work.
BTW, I have returned to the older ROM.... advantages don't outweigh the disadvantages.
My phone keeps on hanging (for the 1st time ever after 5 months use and different ROMs) on the screen where it shows whose calling. I havent answered the call yet but it stops ringing. When i open the PDA it has ANSWER on the left softkey and pressing this doesn't do anything. Will wait for the release..
It is a lot faster thought (the test ROM)
Thanks for the info. I'm not gonna bother upgrading now. I'll wait for a decent ROM later.
Thanks m8
umm - stupid question I know.....
But what does this actually DO??
I understand that this will upgrade the radio stack and thus produce better reception etc - but what else will it do??
If I have an Orange M5000 will I still be able to use it on Orange's network?? Do i need to fill in any settings? Do I need to make notes of certain stuff beforehand? If so - what settings?
I assume this will totally rewrite the registry and what programs are on teh device - or will it??
I suppose a lot of this information is available on the forum - but tracking it down can take a lot of time for someone who's not necessarily that 'au fait' with the working of the device.
Riceburner said:
umm - stupid question I know.....
But what does this actually DO??
I understand that this will upgrade the radio stack and thus produce better reception etc - but what else will it do??
If I have an Orange M5000 will I still be able to use it on Orange's network?? Do i need to fill in any settings? Do I need to make notes of certain stuff beforehand? If so - what settings?
I assume this will totally rewrite the registry and what programs are on teh device - or will it??
I suppose a lot of this information is available on the forum - but tracking it down can take a lot of time for someone who's not necessarily that 'au fait' with the working of the device.
Click to expand...
Click to collapse
I also have an orange M5000 which I would like to get off Orange to use my Vodafone SIM - would installing this new ROM be the way to go ?
not if your phone is simlocked (or network locked). new rom is only the software.
Yeah, sorry
Just reading the other thread on this - sorry , am a relative newby.
It looks like MachineGod and Buzz are on the case though - and with their track record........
I wanted to confirm that Ratcom's file he linked to is good (not corrupt) and his method for upgrade works. Nice work, Ratcom.
ratcom said:
File as been moved its now at :-
ftp://xda:[email protected]/Universal_Upgrade_v1.30.68_radio_1.09.0.zip
This file contains everything need to upgrade your universal
Click to expand...
Click to collapse
Hi ,
Can let me know the speed of the Os did u face any problems after upgrade.
E.g Apps, Hanging , Memmory leaks. Etc. Cheers
I had no problems what so ever with this rom, the speed of the os was breathtaking.
ratcom said:
I had no problems what so ever with this rom, the speed of the os was breathtaking.
Click to expand...
Click to collapse
Does this rom work on dopod 900?
Is this is final release?
Cheers,
hi,
After spending many time trying to root my storex tab 901 I bought in france (Already installed on 4.1.1 with google play), Iwas finnaly able to root it using adb and command line.
to do so:
- Download attached file
- Download from google SDK usb_adb_driver
- Go to your device parameters-> USB -> enable debbuging mode
- create a c:\root folder on your windows XP computer then Extract the zip file attached into it.
- Plugin your device to the computer, when prompted for driver, use google sdk USB_ADB_Driver
- When done, open a windows terminal command line
- type: c:
- type: cd \
- type: cd root
- type: cd rootkit
- type: go.cmd
If everything goes well, your tablet should reboot. you can try installing the free app from google store called "Root checker" to confirm your device is properly rooted.
Also, if you lost the original rom and live suite, here is the link to download the latest build from storex web site:
(I will post the link later when I find it)
JB 4.2.2
CAUTION: USE THIS ROM AS YOUR OWN RISK.......Be sure you have the official rom in case it is not working for you. It appears that even though you have the same tablet Reference, depending on when you buy it, hardware might be a bit different and most likely you will take the risk of having a unusable Touch screen or wifi...
I found out you can fully use your Ezee Tab 901 4.2.2
you can install rom from Manta MID 13.
You will be able to install the rom using Livesuite.
Gain:
- Android 4.2.2
- Root Access out of the box
- Play store installed.
Everything will be working
For the link type in google:
MID13 Android 4.2.2 Jelly Bean - Manta Multimedia Info
select google link called: manta.info.pl
select the link catshare or 4shared.
Start live suite 1.7, select the download img file, do a format when prompted. You done.
When the tablet restart, go to the parameter icon, and change language to French or english
Procedure on the Ezee tab 901 with livesuit:
- completly turn off the tablet, unplug cable
- start livesuite and select the downloaded image file
- keep the VOL- button pressed and plug the usb cable
- without releasing the VOL- button press the Power button 6 times.
- You should hear windows sound saying a USB device has been plugged
- if windows request it, install the driver from Livesuitefolder\usbdriver
- Livesuite should automatically start the flashing process.
- when prompted, "Format device" press YEs.
- When it s 100% you tablet should reboot.
Done.
Note: I did not invent anything, thanks to the good work of MANTA team members. I just found out this rom works on my tablet out of the box.
Hi,
Thanks for sharing these tips. I'm gonna try to update to 4.2.2, hoping this is going to fix some problems with this tablet.
I've been looking a lot for information about how to update ezee tab 901, so you did definitely a great work !
edit : iflash went well, but touch screen is not responding anymore. Any idea of how to solve it ?
Thanks.
samus64 said:
Hi,
Thanks for sharing these tips. I'm gonna try to update to 4.2.2, hoping this is going to fix some problems with this tablet.
I've been looking a lot for information about how to update ezee tab 901, so you did definitely a great work !
edit : iflash went well, but touch screen is not responding anymore. Any idea of how to solve it ?
Thanks.
Click to expand...
Click to collapse
Hi,
did you try going into recovery mode and factory reset? (shutdown tabel completely and keep press on volume+key then press power button)
in the menu, using vol+/- scroll down to wipe factory reset and validate by pressing the power key.
Let me know how it goes.
btw, are you sure your tablet is a Ezee tab 901 and not 971?
Cheers
Hi,
Yes I've got 901 and not 971 (written on the back of the device). I tried factory reset , but still the same problem. However, I flashed again with the original rom, and then touch screen went functional again but the wifi switch is kinda "broken" : it's impossible to turn on wifi from the Settings menu.
I returned the tablet where I bought it, seems there's a sort of material problem with it :/
samus64 said:
Hi,
Yes I've got 901 and not 971 (written on the back of the device). I tried factory reset , but still the same problem. However, I flashed again with the original rom, and then touch screen went functional again but the wifi switch is kinda "broken" : it's impossible to turn on wifi from the Settings menu.
I returned the tablet where I bought it, seems there's a sort of material problem with it :/
Click to expand...
Click to collapse
Im sorry to hear that, i dont think something is broken, i had the same issue with a memup tablet, even though it was a same reference, some model had different hardware, sonlike you after testing multiple rom i had only touch s creen and no wifi ( wifi switch went back to off when i tried to turn it on) or on other rom, i had working wifi but no touch screen.
I hope they will replace your device...
Cheers
pierrottls31 said:
Im sorry to hear that, i dont think something is broken, i had the same issue with a memup tablet, even though it was a same reference, some model had different hardware, sonlike you after testing multiple rom i had only touch s creen and no wifi ( wifi switch went back to off when i tried to turn it on) or on other rom, i had working wifi but no touch screen.
I hope they will replace your device...
Cheers
Click to expand...
Click to collapse
Yep the wifi switch is exactly what i've got on this storex. Thanks for your help anyway. Ho and by the way, I properly rooted it with you first tuto
Cheers.
Fast custom ROM 4.2.2 by TOxico for Ezee tab 901
Guys,
I manage to find a very fast and usable rom for our tablet: (THanks to Toxico.) this rom will change your life.
All information and download are in the thread here:
http://forum.xda-developers.com/show...php?p=42274265
It should basically work on any A13 device with livesuit (tested on my Ezee tab 901 and on my 704CET mem up)
This rom comes with no TS driver, but there is all explanation and download to install the needed driver.
note: you might loose the camera though. I encourage you to read the full thread before going further and flash your tablet.
If you want to know the driver used on your tablet, run a adb shell and type lsmod (You will have a list of loaded/used driver.)
Dont be scared, everything is written in the toxico's thread
My only advice, if you dont know how to use adb, do not try it, this is not that easy.
I hope this will help.
Best regards.
As usual do it at your own risk and even more: make sure you have the original rom... just in case
Tutorial for 971.
Hi there,
Does anyone know a tutorial like this one but for the 971??
My brother-in-law wasn't using is so I'm thinking in tweaking it to see how it gets.
MaedaKeiji said:
Hi there,
Does anyone know a tutorial like this one but for the 971??
My brother-in-law wasn't using is so I'm thinking in tweaking it to see how it gets.
Click to expand...
Click to collapse
Hi, sorry i cant help you, it looks like the 971 is using a10 cpu, sôit can be different.
If you know what you are doing, u can try to backup your original firmware and test the solution i have provided from toxico in py post above. But there is no warranty it s going to work.
Any case, donnot forget google is your friend
Good luck
Unfornetly it seems google doens't like this tablet...
I'll see what I can do with some backups and all.
Thanks anyway!
Hi all!
i wrote reviews for two devices that are very interesting on checking together.
iPega 9023 rev2 -> Telescopic bluetooth controller for smartphones/phablets/tablets and standalone usage.
Teclast X89
There is a summary of the Teclast X89 Device. (sorry, but i can´t post complete article here, due the limitations of the characters by message on this forum)
_______________________________________________________________________________
[REVIEW] Teclast X89 Baytrail Tablet Dual OS (Windows & Android)
Acknowledgments
To Geekbuyingstore for send me a sample of their product Teclast X89 to test it and write this review.
Note about this review
This article is the first part of the main review of the device. Currently i get bricked the device when trying to update/install a clean windows version, and i can´t keep testing for now, until i found the way to recover it
When i get the device unbricked (if i get this), i will post a second part with steps for recovery, firmware update, tips and tricks for this device.
This article is based on general usage of the device, and for windows get many videos of games running directly on the device itself, for showing what you can expect of this.
For technical info and benchmarking on windows, when i get this device operative again, i will update this article with these sections.
Apologize if the article is not enough informative as you can expect. I'll do my best to bring a second part with more info about this device.
Product showcase(Checking of the external view of the package)
First of all, i never mention about packaging of the store that sent to me their articles, because usually i don´t consider interesting to mention, but this time i will do an exception because i get so pleased about this point.
For this review, Geekbuying sent to me two devices (but i wrote in different articles) that correspond to a suggested (by me) combo for use together:
Tablet Teclast X89
iPega 9023 controller
Both of them come in the same package, but fully protected, first with the typical plastic with bubbles, covering all the content:
Then, there is a bag with protective system for avoiding shocking of the devices.
The package arrives without any kind of problems, with the original packaging of the devices in perfect condition.
I wanted to remark this because is not usual that stores give this attention on the devices they send.
Now, back to the device itself. the packaging of it is simple, but all main texts are in chinese.
In the front we found the name of the product (Teclast tPad), and the Intel logo, that give to us a main clue about what is inside.
Back part is the description of the product in chinese
Note that there is no info about the specific model of the tablet (Teclast X89)
Inside we found the basic distribution of the package
Product information
According with the manufacturer, or searching info on web pages, we can found many sources of information about the device and sometimes these information may be not consistent (may be different from one web page to other), and this may cause some confusion for anybody that wants to get info about this product.
On this section i will post the info i get from the manufacturer (or is not possible, the web page that i consider more reliable), listing only the relevant points for a tech analysis of the product, and omit these points that don´t get any relevant info about the device (as many time we found on many pages, things such video capabilities, mail capabilities, etc, that really are software based features that we can install on the device, and not a real feature of the device itself)
I did not found the official specs on Teclast webpage. There is the specs of the previous version (X89HD), but not for this specific device (Teclast X89, or Teclast X89 Retina Display)
Operating System: Android 4.4 & Windows 8.1 OS (Dual Boot)
Model: Teclast X89 Dual OS
Announced: 2014-07
Color: White
Shell Material: Plastic
Display
Size: 7.9 Inch
Resolution: 2048*1536
Display Technology: IPS Retina capacitive touch screen
CPU&GPU
CPU Manufacturer: Intel
CPU Model: Bay Trail-T Z3735F
CPU Core: Quad Core
CPU Speed: 1.83GHz
RAM&ROM
RAM Type: DDR3L
RAM: 2GB
Hard Drive Type: eMMC
Hard Drive Capacity: 32GB
Extend Card: T-FLASH(Support 32G MAX)
Other Functions
Camera
Front: 2.0MP
Back: 5.0MP (Autofocus)
HDMI: Up to 1080p
3G: Supporting external 3G modem
Bluetooth: 4.0
GPS: NO
G-Sensor: Four way
Power
Battery Type: Li-ion battery, 5000mAh
Battery / Run Time(up to)
Wifi On: 4 hours
Wifi Off: 8 hours
Power Device Type: AC Adapter, AC 100-240V
Charging Voltage: DC 5V, 2A
Communications
Wireless ConnectionWIFI
Wireless Protocol802.11 b/g/n
Dimensions200 ×138 ×7.4mm
Net Weight512g
Connectors Ports
1 x Micro USB Port
1 x Earphone jack
1 x Micro HDMI port
1 x Micro SD Card slot
Hope you found interesting and useful.
_______________________________________________________________________________
Zalu2!
Not booting to windows after root
Hi,
I was reading your review about teclast x89, it is awesome.
I was following your instruction for rooting my dual boot teclast x89 (E7ED), and everything went great, i was rooted.
But then my problem apear, i can't boot into windows. Menu for selecting which OS to boot, dissapear. I try every single combination of key, but everytime it boots to Android. CAN YOU PLEASE HEEEEELP ME?
Thanks
djshorty said:
Hi,
I was reading your review about teclast x89, it is awesome.
I was following your instruction for rooting my dual boot teclast x89 (E7ED), and everything went great, i was rooted.
But then my problem apear, i can't boot into windows. Menu for selecting which OS to boot, dissapear. I try every single combination of key, but everytime it boots to Android. CAN YOU PLEASE HEEEEELP ME?
Thanks
Click to expand...
Click to collapse
Hi.
The rooting method will not affect to booting selectiong of OS.
of select, power on the device, and after release the power button, press VOL- & VOL+ at the same time.
the device will ask you to select an Operating System.
another way is connect any USB keyboard (via USB OTG cable), and when turning on the device hit quickly and repeat the "supr" key, for entering to BIOS.
once you get on BIOS interface, go to second screen and select "OS Selection" (or something this way, sorry i can´t check now) as first booting method.
This will enable the OS selection screen
check my review (on my blog) and follow the instructions for configuring the bios for select OS, and add more time for pressing Supr (by default is 1 or 2 seconds, i don´t remember. i suggest 4 or 6 seconds)
Greetings!
Deen0X said:
Hi.
The rooting method will not affect to booting selectiong of OS.
of select, power on the device, and after release the power button, press VOL- & VOL+ at the same time.
the device will ask you to select an Operating System.
another way is connect any USB keyboard (via USB OTG cable), and when turning on the device hit quickly and repeat the "supr" key, for entering to BIOS.
once you get on BIOS interface, go to second screen and select "OS Selection" (or something this way, sorry i can´t check now) as first booting method.
This will enable the OS selection screen
check my review (on my blog) and follow the instructions for configuring the bios for select OS, and add more time for pressing Supr (by default is 1 or 2 seconds, i don´t remember. i suggest 4 or 6 seconds)
Greetings!
Click to expand...
Click to collapse
thanks for the reply,
i try both of your method but no luck,
First, i select power on the device, and after release the power button, press VOL- & VOL+ at the same time. It goes in "dmx" fastboot mode,
Second,
When i enter in bios (supr-del key), in boot manu i have 3 options:
1. UEFI OS (it boots directly to android)
2. Windows boot manager (it boots directly to win)
3. UEFI: built in EFI shell( it opens shell)
can you please check in your tablet what option you have at boot manu?, are they same with mine, what did you select?
What ever i try, i can only boot to android or windows, i cant get screen where i can choose what os to start. Before it was screen this screen
with Operating System selection, but now is gone..
please help!!
p.s in windows now, touch is not working, android is ok.
Thanks
djshorty said:
thanks for the reply,
i try both of your method but no luck,
First, i select power on the device, and after release the power button, press VOL- & VOL+ at the same time. It goes in "dmx" fastboot mode,
Second,
When i enter in bios (supr-del key), in boot manu i have 3 options:
1. UEFI OS (it boots directly to android)
2. Windows boot manager (it boots directly to win)
3. UEFI: built in EFI shell( it opens shell)
can you please check in your tablet what option you have at boot manu?, are they same with mine, what did you select?
What ever i try, i can only boot to android or windows, i cant get screen where i can choose what os to start. Before it was screen this screen
with Operating System selection, but now is gone..
please help!!
p.s in windows now, touch is not working, android is ok.
Thanks
Click to expand...
Click to collapse
If you has been removed this View attachment 3193425
TRY IT →bbs.teclast.com/forum.php?mod=viewthread&tid=389148
mooncake5874 said:
If you has been removed this View attachment 3193425
TRY IT →bbs.teclast.com/forum.php?mod=viewthread&tid=389148
Click to expand...
Click to collapse
Yes, i removed that Stupid of me
Thanks, i will try this, but i dont know chinese, i try to download and tell you results.Is this apk?or all firmware?
Thanks
djshorty said:
Yes, i removed that Stupid of me
Thanks, i will try this, but i dont know chinese, i try to download and tell you results.Is this apk?or all firmware?
Thanks
Click to expand...
Click to collapse
I made the same mistake:crying:,but I can't find download for this apk at that time. so I reinstall all firmware.
this APK backup. file path“/system/app/”
↓
View attachment VManager.apk
GOOD LUCK!
mooncake5874 said:
I made the same mistake:crying:,but I can't find download for this apk at that time. so I reinstall all firmware.
this APK backup. file path“/system/app/”
↓
View attachment 3193597
GOOD LUCK!
Click to expand...
Click to collapse
Thanks,
i install it but no luck.
Should i open this program and select something, or is it enough thaat i installed it?
ANd it will be very good if someone who knows to make a tutorial in english to flash new firmware from scratch (instaling dual boot, android, windows) like x98, that is good tutorial.
Thanks
djshorty said:
Thanks,
i install it but no luck.
Should i open this program and select something, or is it enough thaat i installed it?
ANd it will be very good if someone who knows to make a tutorial in english to flash new firmware from scratch (instaling dual boot, android, windows) like x98, that is good tutorial.
Thanks
Click to expand...
Click to collapse
Maybe you can use google translation
mooncake5874 said:
Maybe you can use google translation
Click to expand...
Click to collapse
I use google translate, but it is awful, i downlod tutorial pdf file, and translated, but i am afraid that i can make mistake because translation is awful.
If someone who knows chinese and english can translate it right it will be good.
Or someone can confirm that tutorial for x98 3g is the same as this only the files are different, that is also good think to do.
currently, i'm writting a second part of the review, with instructions for flashing the device, installing android and windows (both)
for now, i'm a little bit busy and i can´t give so much time, but let me some days and i will publish this part of the review, for helping flashing the device.
Deen0X said:
currently, i'm writting a second part of the review, with instructions for flashing the device, installing android and windows (both)
for now, i'm a little bit busy and i can´t give so much time, but let me some days and i will publish this part of the review, for helping flashing the device.
Click to expand...
Click to collapse
Thanks for everything i manage to repair my tablet by installing dual boot.
If you need help about your review, i can help just tell me. And as suggestions to your review, you can write what apps are safe to remove, so people cant get into trouble like me. Also you can write how can we install only android or only windows, for big storage 32gb to be used only for 1 system
Thanks everybody.
Hibernat does not work
Hello X89 owners,
i also have the newest dual boot retina display version and i am really impressed by the tablet. All works fine and great performance. Only one thing does not work that worked fine for all my other windows tablets i use before. I am not a big fan of connected standby because it still drains battery, so i use "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" command to hibernate the devices (because default button is not visible).
Unfortunately it does not work with the teclast x89. If i run "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" hibernate command it shuts down the tablet but after reboot it does not restore the hibernate state, it simply boots up normally. I also checked event log having error:
error: Windows failed to resume from hibernate with error status 0xC000000D.
I also tried recreating hiberfil.sys and checking disc consistence. But nothing helped. So can you try this on your devices? I simply want to know if its a general Teclast X89 problem...
Thx and br
Arangato
Hi Arangato.
I'm doing some testings with MeegoPad T01 (similar baytrail than Teclast), and as you i can´t get this thing to hibernate by command line
messing with the device, in some moment i get an effective hibernate state, but i'm not sure how i get.
in some testings, after unplug the power and connect again, the device boot windows (quick than normal) from scratch, and show me the application i get running previous the sleep (burnout paradise)
i will keep doing tests, but i really don´t know how to replicate for now. This messages really is for confirme that there is some way to do a sleep on this device, but of course, is not the standard way.
i'm thinking now... may be when i sleep the device, i think i keep the power button pressed to shutdown... for long time, after this unplug power source, wait few seconds and plug again. (something like this i did, i think)
keep testing...
"powercfg -h on" should enable hibernate mode
But the difference between a cold boot and hibernate resume is not that long
aitnog said:
"powercfg -h on" should enable hibernate mode
But the difference between a cold boot and hibernate resume is not that long
Click to expand...
Click to collapse
i tried but did not enabled.
yeah, may be on timing is the same, but there is a good difference. With Hibernating, when you get back, get all the tasks you're doing in the same status (games, work, etc). i really prefer hibernate than complete turn off for this reason.
but thanks anyway.
i recovered the tablet and doing some testings (but for now i´m centered on other devices i must release reviews).
meanwhile, i published the guide for flashing and recover the device, translating the original in chinese, and adding some other stuff that may be useful.
http://manguiro.blogspot.com/2015/03/guide-teclast-x89-installation-guide.html
Note: if your device cannot recover (like mine) with normal steps, or there is some message about corrupt partition table, invalid disk, etc, you must do some manual steps (the flashing tool can´t handle this)
i will put my steps on other article (really, i need to publish another reviews first), but basically i opened the flashing xml file, and check that there are some commented lines that, if you uncomment, the flashing tool will omit anyway, then you must do these steps manually, from fastboot command.
with this, i be able to 100% recover the device. Now i get android and windows working without problems.
hope you found useful.
Touch has stopped working! In windows.
djshorty said:
Thanks for everything i manage to repair my tablet by installing dual boot.
If you need help about your review, i can help just tell me. And as suggestions to your review, you can write what apps are safe to remove, so people cant get into trouble like me. Also you can write how can we install only android or only windows, for big storage 32gb to be used only for 1 system
Thanks everybody.
Click to expand...
Click to collapse
Hey my touch stopped working in windows too.
Anyone have any idea how to fix it? I have only had this for 1 hour and now it is useless for what I got it for...
I need to find out how to restore the touch capabilities to windows. I tried refreshing, it happened after I went to android for the first time.
I've got the Atom Z3736 Win 8.1 version of this but does anyone know if it's possible to install dual boot because this version uses the Z3735?
Because just about all the forums for this device are in Chinese and using Google translate is a nightmare to even find the right people to ask.
com.android.systemui keeps crashing when charging level at 100%
Hello,
recently I get my Teclast X89 tablet, but unfortunately it appeares to have a problem. When the battery charging level comes to 100% (at 99% everything is OK) tablet becomes totally unusable. When the screen is switched off it cannot be waken up and when I use the tablet a window pops up telling that "Process com.android.systemui has stopped", like here:
imgur.com/hjWI1lP
After restart everything is OK, but it really grinds my gears. Maybe someone know how to fix this problem?
Please halp!
Bogusz
Hello Deen0X, thanks for your reply and explanation. Now i know it seems to be a general problem. If you have a tablet like this connected standby is activated and with this hibernate is also enabled by default (you should find a hiberfil.sys file in C root, its used for fast boot option) so you normally can hibernate with the command i mentioned before: "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" this works fine for my other acer win 8.1 tablet (OOTB system) directly after install. But not for the Teclast x89. Of course having a normal boot and restore from hibernate is pretty same time, also fast boot does not have that big impact. I like hibernate because it "freezes" actual system status without draining battery after that.. i often have several browser windows opened, some other metro apps and i like to resume to that state and not to have a clean boot.
@Deen0X: could you check your event log? Is there also the message that device could not restore from hibernation?
So keep me updated, or maybe anybody else can try the "%windir%\System32\rundll32.exe powrprof.dll,SetSuspendState" command to hibernate the teclast x89 dual boot. It will not harm the device. I have the experience if hibernation is disabled and you run this command it simply locks the screen..
Thx and br
Arangato
Hello
This is the process that I used to unbrick the LG G Pad 8.3 tablet.
Note 1: The operating system on my PC is Windows XP SP3 x86
Note 2: The same process should also work on LG G Pad 10.1 (With a different .tot file)
1. First of all you should make sure that the G Pad is detected when connected to the PC.
The device should be seen as QHSUSB_DLOAD in Other Devices section in Device Manager.
hxxp://i.imgur.com/IawJZq0.jpg
2. Install the QHSUSB Driver for your operating system.
The driver can be found here:
hxxp://mega.nz/#!HlpViaTJ!NPACjSQtTjGWdYIj3kHO3bGfmAotaSSQindmgRY9VJ4
I have used the driver from the "checked" folder.
Reconnect the tablet and you should now see the device as Qualcomm HS-USB QDLoader 9008 (COMxx) under the Ports section in Device Manager.
Take a note of the COM port number.
hxxp://i.imgur.com/IR7uUCB.png
3. Download the .tot image file for you tablet model.
I have used the one from here (LG G Pad 8.3 V500 4.4.2):
hxxp://androidfilehost.com/?fid=23329332407581518
4. Now you need the LG BoardDiag tool.
Download this one from here:
hxxp://mega.nz/#!XwgkXTAR!JnAAXKBQoezT7CcxRSVkSQlPFr4AXcvfm6oJbw4bht4
Please use only this one even if you have another BoardDiag. I have tried other versions and this was the only one that worked. For the other versions I always got some error:
failed during loading flash programmer
or
device not found in dload trying flash programmer
With this tool we will extract the .tot rom image first.
Unrar the archive and open BoardDiag3.99c application.
Click on the ... button next to BIN from the Image Extraction section on the bottom of the BoardDiag application and browse to the .tot file you downloaded at step 3.
Then click on the ... button next to DIR and browse to a folder to extract the files in.
Click on the Extract button and wait for the files to be extracted.
After the extraction is complete, close the BoardDiag application.
hxxp://i.imgur.com/Kw0ZhUv.jpg
5. Now we will perform some cheks on the tablet.
Open the BoardDiag application again.
Now select the AP check and EMMC TEST checkboxes from the Board Diag Test section on the top-left.
Also choose the G-pro (APQ8064) on the AP Chipset dropdown selection box. Choose the Com Port that you took a note of at step 2. Select as the Target Dir the folder where you extracted the .tot image file at step 4. These settings are in the top-right side of the BoardDiag application. Make no other changes to the settings.
Now Click on the big START button and wait for the checks to be made.
If everything is OK you should see under the Test Results section the green text PASS both under the AP and EMMC. Leave the BoardDiag application open. Now you can proceed to step 6.
6. Now we will Flash the files to the tablet.
Now you will also check the SDRAM TEST checkbox on the left top side of the BoardDiag application. The other settings were already made in step 5. Click the START button again.
After performing the checks you should see that the files from the image (aboot.mbn, boot.mbn, etc.) are written to the tablet.
After that, the BoardDiag tried to reset the tablet, but it failed and it ended with FAIL for SDRAM under the Test Results section. But the files were already written on the tablet.
7. After that I disconnected and reconnected the tablet to the PC. Nothing was detected, or so I thought, because I could see that in Device Manager something was happening. It was like refreshing itself every 5 seconds or so. I disconnected the tablet from the PC and I plugged in the wall charger. It turns out that the battery had no power.
After a few minutes the LG logo appeared on the screen. Nothing else was happening but I could see the LG logo. I left the tablet to charge the battery for at LEAST 3 hours. If your tablet battery is also discharged you should plug your tablet to the charger for at LEAST 3 hours.
After that I reconnected the tablet to the PC and it was detected as G Pad but it couldn't find the driver.
8. Install the LG Mobile Drivers.
You can get them from here:
hxxp://mega.nz/#!j8xikSYC!Njz3E1_PSJanzQEeZCbbEoWfxUz9TfrTVgusqBCJ2qY
After the driver installation reconnect the tablet to the PC.
It should now be connected properly.
9. Download LG Mobile Support Tool. You can use the launcher from here:
hxxp://mega.nz/#!bp5jgBQJ!xqiMyQU7z-ATlYz__0ybz2kM7boeLFNgqsu5XoPPSzo
Open LG Mobile Support Tool. You should now see the tablet is connected correctly and you should see the tablet model on the left side of the LG Mobile Support Tool. You will now go to Options and choose Upgrade Recovery. Wait for the image to be downloaded and flashed to the tablet.
After the process is completed the tablet will boot to life again.
Please write your comments bellow if you succeeded or failed. I will provide further assistance if required.
PS: I think you need to remove the battery and reinsert it after step 6. Or it could also work if you let the battery discharge completely.
Good luck!
I could not post the images and the links.
I will add them later (after I get to 10 posts).
Contact me on skype (cyadron) for the files and for other help.
nice finding.
it can be handy if we try to flash the v510 bootloader on the v500 to see if it fits and "unlocks" the pad
ckret said:
nice finding.
it can be handy if we try to flash the v510 bootloader on the v500 to see if it fits and "unlocks" the pad
Click to expand...
Click to collapse
Actually it was the only way I found that worked to unbrick this tablet.
Bricked LG G Pad
Need your help man with those files. I bricked my device after flashing wrong file. I have tried LG G2 Pro Board Diag tool and everything passes except SDRAM.
Thanks in advance for your assistance.
Links for files
Hi, I bricked my GPad and would be very interested in getting the proper files or links. How can I get them?
I will update this thread as soon as I can post links. Hopefully no more than a few days.
cyadron said:
I will update this thread as soon as I can post links. Hopefully no more than a few days.
Click to expand...
Click to collapse
Can you post links ?
This sounds very promising @cyadron, hopefully you'll be able to edit the links in soon.
@muiriddin this sounds like you should be able to revive your tablet from your science experiment.
@fefifofum posting here instead of the other thread as that would be way off topic for it.
This sounds like we'll be able to do some proper experimenting and still be able to recover if it doesn't work!
Hopefully I will be able to post the links soon. Does anyone know the minimum number of posts required to post links?
cyadron said:
Hopefully I will be able to post the links soon. Does anyone know the minimum number of posts required to post links?
Click to expand...
Click to collapse
Just put hxxp instead of h t t p.
roirraW "edor" ehT said:
Just put hxxp instead of h t t p.
Click to expand...
Click to collapse
Thank you. That worked.
Links have been added.
cyadron said:
Thank you. That worked.
Links have been added.
Click to expand...
Click to collapse
This thread should probably be pinned. You can request the moderators to do so by "reporting" your first post and ask them there. Too bad, as far as I know, there aren't any TOTs available for the VK810, although I haven't needed one yet.
I used the tutorial, but accuses ero Emmec test fails
Any solution?
edsmat said:
I used the tutorial, but accuses ero Emmec test fails
Any solution?
Click to expand...
Click to collapse
Unless there is a hardware problem with the emmc, it should work.
Try and remove the battery and put it back again.
Please also make sure you follow the steps as described.
Cluey said:
This sounds very promising @cyadron, hopefully you'll be able to edit the links in soon.
@muiriddin this sounds like you should be able to revive your tablet from your science experiment.
@fefifofum posting here instead of the other thread as that would be way off topic for it.
This sounds like we'll be able to do some proper experimenting and still be able to recover if it doesn't work!
Click to expand...
Click to collapse
It would be nice to get my science experiment working again... I hopefully will have some time to follow this process this weekend...
hi, i have hardbrack v410 no have screen at all only qualcomm hs_usb 9008 please help me (
lgv410 said:
hi, i have hardbrack v410 no have screen at all only qualcomm hs_usb 9008 please help me (
Click to expand...
Click to collapse
Read everything you can and follow instructions.
I think you'll need to search further than just this thread though. I read about someone recovering an LG device from this state but I think it was a phone.
But you'll need to find it and follow the instructions, I don't remember where I read it.
Cluey said:
Read everything you can and follow instructions.
I think you'll need to search further than just this thread though. I read about someone recovering an LG device from this state but I think it was a phone.
But you'll need to find it and follow the instructions, I don't remember where I read it.
Click to expand...
Click to collapse
thank you for you answer, can you show me where i can found this instructions to fix this problem? :/
lgv410 said:
thank you for you answer, can you show me where i can found this instructions to fix this problem? :/
Click to expand...
Click to collapse
No, I'm not here to do searches for you.
It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
When I run LGUP it says Model is Unknown, then gives an error telling me I have to choose a known Model. Drivers are installed, USB debugging is enabled, not sure what else there is missing. Please help.
my phone: (T-Mobile lg g3 d851 30e)
dricialg said:
error Unknown model.!!
my phone: (g3 d851 30e)
Click to expand...
Click to collapse
sorry you had problems
the error is one of the drivers lg
you should plug it into one of the main USB ports on your PC.
or rather entering device manager and re-assign drivers to ports.
Have you downloaded the lgup for lg g3 and g2?
Drivers are installed, USB debugging is enabled, LG PC Suite OK.not sure what else there is missing.
Download : lgup-g2-g3.zip
Solve it FIX
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
that includes cloudy fa's roms
minicm94123 said:
It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
Click to expand...
Click to collapse
Where are downloads
minicm94123 said:
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
Click to expand...
Click to collapse
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
raf1978 said:
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
Click to expand...
Click to collapse
Do you still wanting help?
minicm94123 said:
Do you still wanting help?
Click to expand...
Click to collapse
YEEEESSSSSS !!!!
Please.... ?
(My phone is currently used as a toy by my 6 yo daughter ? )
LGUP "UNKNOWN" and FlashTool failure with LG G3 (and possibly others)
When I downloaded and installed LGUP with the DLL installer stated to be for the LG G3, the program did not recognise the phone, reporting it as "UNKNOWN". The LG FlashTool also failed, reporting the IMEI and PID as NULL. After spending a lot of time on this, I twigged that the DLL file in the LGUP model directory was for the 8994 processor; but the G3 has an 8974, quite different and incompatible. I located the DLL installer MSI file for 9874 devices, uninstalled LGUP and the DLLs from Windows add/remove programs, ran the 9874 DLL installer and reinstalled the LGUP program, and everything worked.
The file is, amongst other places, on https://uptoandroid.com/download-lg-up-tool-for-lg-smartphone-latest/. Do not download DLL files for LG G4, LG V10, LG G3, LG Stylo, filename LGUP_Common_DLL_Ver_1_0_28_5 .msi, but instead For LG phones based on Qualcomm Snapdragon 800 MSM8974 SoC, filename LGUP_8974_DLL_Ver_0_5.msi:.
HTH
23 Aug 19: I find that I've rediscovered the wheel. Exactly what I said was posted in 2016 - if I'd found it, it would have saved me a lot of time!