[Q] Unable to modify the system files !! - EVO 4G Q&A, Help & Troubleshooting

Hi Everyone,
I have 2 HTC Evo 4g with 2 different problems:->
Problem on first phone:
I root the HTC Evo 4G using the method given by the link below:
http://themikmik.com/showthread.php...-18-HBOOT-with-HTCDev-com-No-More-Watermark!-
Further i installed costum ROM and it worked good. I was wanting to edit the system folder and replace the camera apk but i see that the SYStem folder is not editable.
Is there any method to access and modify the system files.
Problem with second phone:
While rooting the phone using the link above in the step 10. which mentions:
10)Using the previously downloaded Froyo PC36IMG.zip from the OP, rename to "PC36IMG.zip", and place on root of SD Card. Reboot into Bootloader, and follow the prompts to update device (Notice in the below picture that the watermark shows as "LOCKED" again).
The file (PC36IMG.zip) worked perfect on the first phone but on the second it is not able to recognize the PC36IMG.zip. Kindly help me with this as the rooting process is incomplete.
Awaiting reply. Thanks in advance...

1st problem, you need to Mount your system as writable.
2nd problem, is the phone S-OFF?
Sent from the future

@ 1st problem How do we mount the phone system to be writable?? If there is any steps to be followed:
@2nd problem the phone is not S-OFF.. it says S-ON. Usually after the PC36IMG.zip is processed the Watermark ***Locked*** disappears along with the S-ON.

vikasraj said:
@ 1st problem How do we mount the phone system to be writable?? If there is any steps to be followed:
@2nd problem the phone is not S-OFF.. it says S-ON. Usually after the PC36IMG.zip is processed the Watermark ***Locked*** disappears along with the S-ON.
Click to expand...
Click to collapse
Download a file explorer such as es file manager and go into root settings and mount system as writable. And the phone won't read certain PC36IMG's without S-OFF.
Sent from the future

death-by-soap said:
Download a file explorer such as es file manager and go into root settings and mount system as writable. And the phone won't read certain PC36IMG's without S-OFF.
Sent from the future
Click to expand...
Click to collapse
You need to mount the system as writable like he said with a file explorer.
You do not need to be S-OFF to run a PC36IMG.zip file that is officially from HTC, as that root method does demonstrate, although it is much easier. Notice it did work on your first phone. That root method downgrades your operating system to an earlier version, because those are the only ones that you can S-OFF. The root method downgrades your misc partition to the original (Engineering) one, so that the phone will recognize all PC36IMG.zip files from HTC as being a later version than itself (so it thinks), and allow you to update (so it thinks) to a later version, but you're actually downgrading. The phone will not let you downgrade (while not rooted) unless it is S-OFF or tricked, which is the reason why it rejects the PC36IMG.zip file from HTC (It's trying to prevent you from downgrading). Obviously, something went wrong on the second phone during that rooting tutorial. Was the bootloader previously unlocked, and did the second phone have superuser permissions?
Also, depending on what you want to do with the phone (like writing to the system partition), you only need S-OFF if you plan on flashing radios, splash screens, or Hboots (which I especially don't recommend). Everything else, you could just unlock the bootloader and just follow the tutorial up until the point where you flash the superuser app (step 4). It gets kind of complicated trying to get it S-OFF as well. Some people have more difficulty that others.

Might be more helpful to post in that other thread if you have issues with that method . . . I'm just sayin' .

Also, your sdcard MUST be formatted to FAT32 for the bootloader to recognize any PC....zip files
Sent from my PG06100 using xda premium

@All i am going through the rooting process again... The phone was bootloader unlocked from htcdev.com... Will format the sdcard and update you all again..

vikasraj said:
Hi Everyone,
I have 2 HTC Evo 4g with 2 different problems:->
Problem on first phone:
I root the HTC Evo 4G using the method given by the link below:
http://themikmik.com/showthread.php...-18-HBOOT-with-HTCDev-com-No-More-Watermark!-
Further i installed costum ROM and it worked good. I was wanting to edit the system folder and replace the camera apk but i see that the SYStem folder is not editable.
Is there any method to access and modify the system files.
Problem with second phone:
While rooting the phone using the link above in the step 10. which mentions:
10)Using the previously downloaded Froyo PC36IMG.zip from the OP, rename to "PC36IMG.zip", and place on root of SD Card. Reboot into Bootloader, and follow the prompts to update device (Notice in the below picture that the watermark shows as "LOCKED" again).
The file (PC36IMG.zip) worked perfect on the first phone but on the second it is not able to recognize the PC36IMG.zip. Kindly help me with this as the rooting process is incomplete.
Awaiting reply. Thanks in advance...
Click to expand...
Click to collapse
You should donate one of your evos to the dev asking for an evo donor to work on 4G... His thread is forum.xda-developers.com/showthread.php?t=2109646 there
Sent from my PC36100 using xda app-developers app

Related

[Q] Help. I'm stuck in the middle of a root of my evo via linux terminal/ adb

So I'm not fluent in the linux terminal. I'm basically illiterate, deaf and dumb. So here I am trying to root using toasts tutorial, How To Root The HTC EVO ~ Part-1 \0/
the forum won't let me post links yet., and apparently the software here thinks some part of the code I'm posting is a link.
Anyway I'm at this step,
- At this point it will boot into a rooted rom.
- YOU ARE NOW ROOT!!!
- rename the PC36IMG.zip on your sdcard:
- plug your phone into a usb port on your desktop and do:
Click to expand...
Click to collapse
I may be root but I had a problem and had to redo this step... my sdcard was not being recognized. After reflashing/ updating I was able to access it again.
Now this rename the zip file step... I'm thinking if I rename it the code I'm supposed to enter isn't going to work. What should I rename it to?
How should I enter this code? first off my sd card isn't called sdcard it's called an 8 digit number.
I tried this (can't post the code for some reason) without changing the name of the zip file. I'm thinking I don't have the locations right because I know the file is in there.
I need some direction to get to the next step.
Thanks
Mods please move this thread....
to wherever it will get the most or correct exposure. Sorry if I put it in the wrong place.
i have no idea what your doing...i rooted via the unREVOked method...i had to downgrade to 2.1, then actually root...can u send me a PM with what tutorial your following? and also the current info you have for your phone, like what its running (2.1 or 2.2) and stuff of that nature.... we shall see if i can help, not sure but its worth a shot
okay form what i read you have already flashed the .zip. Make sure you clear your data and cache as these will cause boot loops if not cleared. Also you can rename the .zip to anything you want, this just makes it so the bootloader does not try to install the .zip a second time.
oshizzle1991 said:
i have no idea what your doing...i rooted via the unREVOked method...i had to downgrade to 2.1, then actually root...can u send me a PM with what tutorial your following? and also the current info you have for your phone, like what its running (2.1 or 2.2) and stuff of that nature.... we shall see if i can help, not sure but its worth a shot
Click to expand...
Click to collapse
I'm running 2.1. I never upgraded. The tutorial I'm following is in thread #690762 I'll try to pm the link but I don't think they'll let me. I thought unrevoked wasn't a full root. I want to unlock nand. I'm also using Ubuntu here, not windows.
http://forum.xda-developers.com/showthread.php?t=690762
nfaust01 said:
okay form what i read you have already flashed the .zip. Also you can rename the .zip to anything you want, this just makes it so the bootloader does not try to install the .zip a second time.
Click to expand...
Click to collapse
Nice looks like I'm allowed to put up links now... Thanks!
Yes I flashed the .zip my phone called it "updating" when it was going on.
Make sure you clear your data and cache as these will cause boot loops if not cleared.
Click to expand...
Click to collapse
Do I do that from the boot menu?
Also you can rename the .zip to anything you want, this just makes it so the bootloader does not try to install the .zip a second time.
Click to expand...
Click to collapse
I just removed the .zip part. What is the point of the next step, which I couldn't get to work, if I rename the file?
Code:
adb shell mv /sdcard/PC36IMG.zip /sdcard/root-PC36IMG.zip
Well I guess I'm going to start over and wait for the latest unrevoked to come back out. Thanks to everyone that tried to help. "NO ROOT FOR YOU!"
You have a lot to learn....
First of all, don't rename the sdcard, rename pc36img.zip. Just rename it to anything you want so boat loader doesn't recognize it and try to update itself. Next, you aren't utilizing root. You do have a rooted boot loader, but you are still using a protected recovery and rom. Install a custom recovery and flash a new rom so you can be cool.
dkdude36 said:
First of all, don't rename the sdcard, rename pc36img.zip
Click to expand...
Click to collapse
Yes, I know I have a lot to learn. I didn't rename the sdcard, that wasn't possible. I figured part of the problem with getting this to work was the path. My sdcard wasn't called sdcard it was called some 8 digit number. I eventually worked around pushing the file to the sd card by installing the phone as a drive and dragging the file to the sdcard.
Just rename it to anything you want so boat loader doesn't recognize it and try to update itself.
Click to expand...
Click to collapse
After I rebooted and updated/ flashed the file, I renamed the file on the sdcard by removing the .zip. I did this via disk drive on my laptop because I wasn't getting anywhere with the command line.
Again this part didn't make any sense to me, not that most of it does, but what was the point of the next command in the directions if I renamed the file?
Next, you aren't utilizing root. You do have a rooted boot loader, but you are still using a protected recovery and rom. Install a custom recovery and flash a new rom so you can be cool.
Click to expand...
Click to collapse
Right "I have a lot to learn" I thought following the directions in toasts tutorial step by step would have gotten me to that point. I didn't realize I was just supposed to skip stuff when I run into problems. That kinda seems like what your telling me to do. I thought all of the commands were important.
I was hoping you had some follow up insight dkdude.
if you still on 2.1, try this method (just make sure the files aren't corrupted)
http://forum.xda-developers.com/showthread.php?t=741294

[Q] Returning HTC Vision to Stock

Hey Guys,
So I've been playing around with SDK using adb commands.
I been successful replacing stock ROM with a custom ROM.
Rooting and Unrooting.
Semi-bricking and getting it back.
Extracting a ROM file from an RUU and flashing it successfully.
Problem: the closest I can get to stock is a stock system with clockwork mod recovery flashed. Or Android system 3e recovery with the Superuser app installed on the system.
I've read posts that say to mount the system/ folder using
mount /system, mount -o remount, rw system/ , etc
all give me permission denied when I: rm /system/app/Superuser.apk
I've read that you must be recovery mode to mount system/ folder but when in recovery mode I cannot get connected with running: adb shell. error device not found.
So can anyone help me either remove Superuser.apk from my system/app folder or flash "Android recovery system 3e" without Superuser being installed?
I wish there was an RUU for Bell Mobility 1.34.666.5 floating around.
Thanks guys
HTC Vision
1.34.666.5
I'm driving and just skimmed through your post, but have you installed a pc10img through the booatloader? That is suppost to bring everything back to stock.
Sent from my HTC Vision using XDA Premium App
I did try using a PC10IMG.zip file using bootloader. But the only PC10IMG file that I could find was software version 1.34.666.1. I actually used this method to recover from a semi-brick state. (phone would not move past HTC boot screen)
I tried replacing the system.img file from the PC10IMG.zip that worked. But I believe that having S-ON prevented the new PC10IMG file to proceed. Which was probably a good thing as substituting the system.img file probably wasn't smart.
I've read that flash PC10IMG files with S-OFF is risky. If this is my best option. Can anyone give me a heads up as to what to double check for?
Thanks again for anyones input.
did you try this?http://forum.xda-developers.com/showthread.php?t=835971
Thanks for your reply.
Not sure this will help. If I had the files that corresponds to a
Bell Mobility 1.34.666.5 Stock Factory Bootloader / Recovery / ROM / Kernel I could get it no problem.
The hex editor I believe would be something new for me to try. But I believe this would only help if I am trying to apply software that is older then the software currently installed. This is not the case here.
Has anyone ever used clockwork mod recovery files to make a working PC10IMG.zip file that I could flash at startup using hboot?
I think you need to downgrade use the hex editor n flash the PC10Img
Sent from my SGH-T959 using XDA Premium App
Flashed my own PC10IMG.zip file with the new system.img file inserted. Only had to have S-OFF to do.
Unfortunately, this did not work. Phone boots to HTC screen and freezes.
Back to my original problem. Anyway to remove Clockwork recovery without installing Superuser.apk. or Anyway to uninstall Superuser.apk

Trying to run Ad Free

Hi everyone!
I am trying to make Ad Free from the Market work but it won't. My HTC Desire is rooted with unrevoked (so, not S-OFF, but I've read that it's not necessary. Is it?).
I have tried two different things:
1) Run the program WITHOUT the symlink option enabled. The phone automatically reboots and nothing happens, adds are still shown in all the apps.
2) Run the program WITH the symlink option enabled. The program seems to work and a message appears saying that my phone should now be add free. But, in fact, it is not, adds are still visible everywhere.
I have been looking for solutions in this forum and in Google but I have seen a lot of different procedures suggested by users and I am not sure it would be safe for the phone to try them one by one.
It would be great if someone has been in the same situation and could tell me how to solve my problem.
Thank you in advance.
You either have to be s-off in order for the app to place the modified "hosts" file in /system/etc/ Otherwise you have to have the file symlinked to a specific place on the data-position(this is the place the app places the "hosts" file if you check the option for symlink.)
You can also just push the modified hosts file from recovery
edit: my suggestion is to s-off it, as it makes everything so much easier, and if you screw something up, you can almost always recover your phone without running a ruu.
mortenmhp said:
You can also just push the modified hosts file from recovery
Click to expand...
Click to collapse
I have been trying to do that before opening this thread but I didin't manage to do it successfully. Could you please help me through the process?
Anyway, how could I do the "you have to have the file symlinked to a specific place on the data-position(this is the place the app places the "hosts" file if you check the option for symlink.)" part?
You need to edit the ROM to symlink the hosts file to the /data partition
EddyOS said:
You need to edit the ROM to symlink the hosts file to the /data partition
Click to expand...
Click to collapse
Is there any place where I can get info to do that? I am kind of inexperienced...
don't do it just push the goddamn file in recovery or for god sake please just run s-off.
If you want help pushing it, pm me.
edit: host file added
You need to have s off, this is easy with alfarev!
Sent from my HTC Desire using XDA Premium App
Have been suggested(twice by me), but as you might get from reading his replies, he doesn't want to do that. I guided him through pushing the file though, so the problem have been resolved.
Willem Mulder said:
You need to have s off, this is easy with alfarev!
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
With some help from mortenmhp by private messaging I got it to work without s-off. Anyway, I tried alfarev this morning and it detects my phone but gets stuck in the next step...
By the moment is one thing I don't need, but it would be fine to know what the problem is...
Willem Mulder said:
You need to have s off, this is easy with alfarev!
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
S-OFF doesn't work with all kinds of desire phones ...
some PVT-4 (like mine) cant be S-OFF u may brick it trying so just push files its safer using terminal emulator from market or using ADB
this may help u with commands http://forum.xda-developers.com/showthread.php?t=688820
Well, in alfarev web site they say their software is compatible with PTV4 HTC Desire, but anyway mine is PTV3, so the problem can't be that.
Xgeda said:
S-OFF doesn't work with all kinds of desire phones ...
some PVT-4 (like mine) cant be S-OFF u may brick it trying so just push files its safer using terminal emulator from market or using ADB
this may help u with commands http://forum.xda-developers.com/showthread.php?t=688820
Click to expand...
Click to collapse
Yes it does, or at least it works with all gsm ones for now. From their website:
Supported devices:
HTC Desire GSM (Bravo), all hardware models (PVT4 too)
Click to expand...
Click to collapse
Also no you cannot use terminal emulator to push files, and you most certainly cannot use it to manage files on the /system partition without s-off.
Dj Telo: the most common problems with alpharev is connected to the computer the software is run on. Are you using an emulator to boot the disk, or are you actually booting it?
If the first one is the case, you will need to burn the image and boot it, however, if that doesn't work, you might need to try another computer. Just borrow one, as it is a onetime thing, and it only takes a couple of minutes.
Also make sure your current rom is not using d2sd, d2ext or something similar, as the tool uses the data-partition and may not work with the ext-partition,
I am very sure, you do not s-off to run adfree!!
Did you run "download & install hosts" directly after starting adfree and requested the superuser request to "yes" and "remember"? Which ip do you use?
MatDrOiD said:
I am very sure, you do not s-off to run adfree!!
Did you run "download & install hosts" directly after starting adfree and requested the superuser request to "yes" and "remember"? Which ip do you use?
Click to expand...
Click to collapse
Well as already explained the relevant file (/system/etc/hosts) is placed on the system partition(obviously). And as such it cannot be edited while the system is booted without s-off, so an app won't be able to do so.
So unless the system has been edited to load the file from the data-partition(as in the symlink option i referred to earlier) yes you do indeed need s-off to use the app. However as you might get from actually reading through the thread, the actual problem has been resolved, and currently he is just trying to gain s-off.
mortenmhp said:
If the first one is the case, you will need to burn the image and boot it, however, if that doesn't work, you might need to try another computer. Just borrow one, as it is a onetime thing, and it only takes a couple of minutes.
Click to expand...
Click to collapse
I did burn a CD but it did not work. I will borrow a computer, as you suggest. There's a busy week for me coming but I'll try that afterwards. I'll insist on this thread in case I can't succeed.
MatDrOiD said:
I am very sure, you do not s-off to run adfree!!
Did you run "download & install hosts" directly after starting adfree and requested the superuser request to "yes" and "remember"? Which ip do you use?
Click to expand...
Click to collapse
I did exactly what you say, but adds would still appear. The IP used was the default one.
Anyway, I already managed to make it work.

How To Root HTC Wildfire S A510C CDMA Virgin Mobile!

First, I'd like to thank Chlinkchlink, Heritz, and Superoneclick application for your help and original Root.zip File! Wouldn't work without this!
I Finally found the perfect method to root this Virgin Mobile Device with S-On (Or OFF)! I Spent 3 days on my customers phone at my computer shop figuring a good method without read/write or freeze errors. I Simply EXTRACTED the SUPERUSER and ROOT files from SUPERONECLICK application and PASTED those files into the ROOT.ZIP File provided. Result? The ULTIMATE ROOT.ZIP MODIFICATION! Below are the methods....
Forget to mention... "I AM NOT RESPONSIBLE IF YOU BRICK/BREAK/THROUGH YOUR PHONE OUT THE WINDOW/ Etc!" That can only happen if you fail to backup your device or fail to read my steps and HTC Dev. Thanks and HAPPY ROOTING!
Follow The HTC Dev method to unlock your bootloader. Sorry. Due to rules I am too new to submit links.
Then install clockworkmod recovery like you would through adb on your computer. Download from attachment. make sure you Extract it!
Place the clockworkrecovery image inside your Android Adb folder. Place your phone in bootloader usb mode and plug it into the computer. Open command prompt and browse to the folder where you placed the recovery
example how:
cd c:/
cd Android
Now Flash this bad recovery!
example on cmd prompt:
fastboot flash recovery recovery-clockwork-5.0.2.8-marvelc.img
Now you have clockworkmod recovery!
Now hit Recovery on your cell...
Get My Modified Root.Zip File on link attached.
Now mount USB Storage and make sure your phone is still plugged in to computer.
Copy my modified Root.zip file you downloaded into the root of your MicroSD Card.
Unmount USB and flash the Root.zip file.
Reboot phone and you are now rooted! Donate / Like Me/ And good comments if I helped you!!!
Thanks for your help with my phone. I'm glad you were able to figure it out after i gave up trying. In a few wks i'll get the VM Evo 3d 4g and swing by to have you do that phone as well. I'll let you know if i run into any issues or updates. Thanks once again!
Can anyone else verify this works?
Finally found something for wf s CDMA. Only 1 other person out there that has tried this? Anyone else?
This would of helped me a while ago.
I had an issue where CWM 5.0.2.8 would freeze and restart itself. I had to use 4.X.X.X (don't remember the exact numbers) in order to be able to flash roms.
And maybe you can help me with this. I installed HenseMod with the VirginMobile patch, but I have no service. My carrier doesn't seem to know why either.
Does anyone know what the problem is?
Here you go
F9zSlavik said:
This would of helped me a while ago.
I had an issue where CWM 5.0.2.8 would freeze and restart itself. I had to use 4.X.X.X (don't remember the exact numbers) in order to be able to flash roms.
And maybe you can help me with this. I installed HenseMod with the VirginMobile patch, but I have no service. My carrier doesn't seem to know why either.
Does anyone know what the problem is?
Click to expand...
Click to collapse
Yes.. I am sure you need to go back to stock rooted rom. Then activate (or reactivate) with your carrier, then put the Hensemod back.
(Most HTC phones with SENSE won't activate with the carrier with any cyanogen based rom). It must have SENSE.
Nice tut, thanks
Sent from my new LG Optimus Elite
F9zSlavik said:
This would of helped me a while ago.
I had an issue where CWM 5.0.2.8 would freeze and restart itself. I had to use 4.X.X.X (don't remember the exact numbers) in order to be able to flash roms.
And maybe you can help me with this. I installed HenseMod with the VirginMobile patch, but I have no service. My carrier doesn't seem to know why either.
Does anyone know what the problem is?
Click to expand...
Click to collapse
what provider do you have? and if its vm try another ROM that was made by someone with a marvelc (the guy who made your ROM doesn't have the phone)
Sent from my HTC_A510c using Tapatalk
I never had a problem with any of the cwm on the marvelc, maybe it was a bad install? I just use the old version then use ROM manager to flash the new version
Sent from my new LG Optimus Elite
sweet, thanks
Very helpful and a good consolidated version. I had more trouble unlocking the bootloader than following your HowTo!!!
Thanx Again!
Unroot??
rgsgroup2005 said:
First, I'd like to thank Chlinkchlink, Heritz, and Superoneclick application for your help and original Root.zip File! Wouldn't work without this!
I Finally found the perfect method to root this Virgin Mobile Device with S-On (Or OFF)! I Spent 3 days on my customers phone at my computer shop figuring a good method without read/write or freeze errors. I Simply EXTRACTED the SUPERUSER and ROOT files from SUPERONECLICK application and PASTED those files into the ROOT.ZIP File provided. Result? The ULTIMATE ROOT.ZIP MODIFICATION! Below are the methods....
Forget to mention... "I AM NOT RESPONSIBLE IF YOU BRICK/BREAK/THROUGH YOUR PHONE OUT THE WINDOW/ Etc!" That can only happen if you fail to backup your device or fail to read my steps and HTC Dev. Thanks and HAPPY ROOTING!
Follow The HTC Dev method to unlock your bootloader. Sorry. Due to rules I am too new to submit links.
Then install clockworkmod recovery like you would through adb on your computer. Download from attachment. make sure you Extract it!
Place the clockworkrecovery image inside your Android Adb folder. Place your phone in bootloader usb mode and plug it into the computer. Open command prompt and browse to the folder where you placed the recovery
example how:
cd c:/
cd Android
Now Flash this bad recovery!
example on cmd prompt:
fastboot flash recovery recovery-clockwork-5.0.2.8-marvelc.img
Now you have clockworkmod recovery!
Now hit Recovery on your cell...
Get My Modified Root.Zip File on link attached.
Now mount USB Storage and make sure your phone is still plugged in to computer.
Copy my modified Root.zip file you downloaded into the root of your MicroSD Card.
Unmount USB and flash the Root.zip file.
Reboot phone and you are now rooted! Donate / Like Me/ And good comments if I helped you!!!
Click to expand...
Click to collapse
Hey do you know how to unroot the vmwfs? i used this to root
r=watch?v=rIKsoZf2BCA&list=PL44107726C058E557&index=1&feature=plpp_video[/url]
but i wanna unroot any ideas??
Finally a method easy and straightforward! well done!
I'm stuck at the end, this is a bit vague:
rgsgroup2005 said:
Unmount USB and flash the Root.zip file.
Click to expand...
Click to collapse
searching the forum I found this http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android is that what you mean?
Can't find any option to flash the on the boot menu... .zip file
Has anyone tried this with a recently purchased VM Wildfire S? Say July 2012 or after?
do we need to s-off
do we need to s-off the phone befor going ahead with the steps mentioned.I mean can we root the phone even without s-off

Disabling the boot sound.

Anyone know of a way to disable the boot sound? Having just recently rooted, installed TWRP, Xposed, and doing a few other things it's already driving me crazy. Searching has gotten me nowhere, with links being mostly about BoomSound, or boot animations.
I don't know if its the same for the M8, but here is how to do it for M7....
http://forum.xda-developers.com/showthread.php?t=2443825
mm79k said:
I don't know if its the same for the M8, but here is how to do it for M7....
http://forum.xda-developers.com/showthread.php?t=2443825
Click to expand...
Click to collapse
Thanks so much, fixed it for me. Now I can start rebooting it where needed at uni.
At last ... silence !!!
I got my M8 yesterday and have root with S-ON. (The link says on did this with S-ON) I've have renamed the mp3-file and also tried to edit the default.xml file.
In both cases the phone reboot istself and reverts any change I have made.
So I beleive I need S-OFF, even one said in the link he did this mod with S-ON?
@fasst
I believe with the M8 you have to be s-off or install this in order for any changes you make to /system stick after reboot.
fasst said:
I got my M8 yesterday and have root with S-ON. (The link says on did this with S-ON) I've have renamed the mp3-file and also tried to edit the default.xml file.
In both cases the phone reboot istself and reverts any change I have made.
So I beleive I need S-OFF, even one said in the link he did this mod with S-ON?
Click to expand...
Click to collapse
TWRP recovery :
boot to recovery - select Mount and mount system
select Advanced - select File Manager - browse to system/customize/resource and select the HTC_Sense5_Boot.mp3 then you have option to delete it or to rename it
done then reboot, it should work for S-On device
fasst said:
I got my M8 yesterday and have root with S-ON. (The link says on did this with S-ON) I've have renamed the mp3-file and also tried to edit the default.xml file.
In both cases the phone reboot istself and reverts any change I have made.
So I beleive I need S-OFF, even one said in the link he did this mod with S-ON?
Click to expand...
Click to collapse
I forgot if SOFF is required; but, you need to remount RW; so, either do
http://forum.xda-developers.com/showthread.php?t=2701816
or, make the change from recovery.
If phone reboots itself, it's an other issue. If just the module was missing, then, then change would be canceled after reboot, but after manual reboot.
Auto-reboot on write means you have an other issue. For me, it was that the file system was corrupted. I needed to run fsck on /system; it was not included in my ROM. A friend build it for me. Fsck found errors, fixed them, and them, i had no more reboot on write.
I will upload fsck on the thread about the module in a few days.
Works great! As I am rooted, I just used ES File Explorer to go to system/customize/resource and I renamed HTC_Sense5_Boot.mp3 to HTC_Sense5_Boot.mp3.Silent Works like a charm. Thanks!

Categories

Resources