Related
Ave, folks!
So, here it is: a little bit tweaked CM 10.1 build This build is based on official CyanogenMod 10.1 sources, which are to be found here. Kernel is the stock CM 10.1 one, to which I did only some small edits (see changes below). So, as this is based on official CM10.1, all the bugs, which are present there, may be found here, too. The commits, which aren't merged yet and are present in tbalden's staging builds, are present here, too.
Aim of this build was to make it a little bit more responsive and at the same time maybe a little bit more battery friendly, faster and do some customization on standard settings which are reflecting my needs / wishes... As it looks, this went well
I will NOT answer standard questions, which are answered already ten times in any other thread and for which the answers can be found by just reading the stickies etc You should know, what you are doing here and have the basics in mind. However, a little install guideline is added to second post.
Pre-Condition: Bootloader ≥ 1.28 ! You should've upgraded your HOX already as it only provides a better experience and sources are available now.
Standard CM disclaimer:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Thanks and credits to:
- tbalden, mdeejay and his crew for the CM-10.1 device and vendor trees, which made it to official CM-10.1 device tree,
- pabx, maxwen, thömy, gorbi and some others, too, for their work on device and kernel trees and other stuff
- The whole CyanogenMod Team and all the committers of additions / patches / tweaks etc pp, of course: thx!
- If you think, I forgot to include you in this list, please shout out LOUD or hit me a silent pm
This build contains the following edits:
Build's main changes, have a look @changelog, too:
Build is mostly stock regarding apps and everything else, beside my edits of course
General build changes:
- Build is ODEXed !!! Have the .odex files in mind when changing stuff...
- Removed cm backup scripts, UI sounds, sample videos, bootanimation and Provision.apk/.odex
- SQLite3 speed hack
- Added SpareParts app back: this is only for Animation settings, and provides some useful quick links to battery stuff
- VoiceDialer BlueTooth check
- Changed Apollo with stock Music app
- Deactivated building of CMUpdater
- Cleaned out goldfish stuff in ramdisk and build
- Koush's Carbon Backup is included
- Anti-Ads hosts file
- Custom, more youtube friendly, media-profiles: lowered 1080p bitrate to 12M and fps to 25 (was 20M and 30), but increased encoding quality to 100%
Kernel changes:
- Compiled with Linaro 4.6.2 TC
- initrd: System is mounted RW
- initrd: ro.adb.secure=0 and ro.secure=0
- No-op scheduler as standard
- SmartMax governor, changed some values for a little bit more responsivity & power
frameworks:
- Device's screen stays off when charger unplugged
- Custom brightness levels: they were much too bright
- Faster animations (for other languages than DE, EN and SL, have a look @SpareParts app too)
- Lowered vibration durations
- Increased wpa_supplicant scan interval
- Lowered WiFi driver stop delay
- TBalden's LED light advancements
- Risen datause polling period
- Deactivated Dreams
- Deactivated Safe Headset Volume
- Deactivated CRT Electron Beam animation
frameworks / SettingsProvider:
- Enabled installing of non-market apps
- Lowered long press timeout
- Enabled automatic screen brightness
- Set default screen brightness to 31 (standard: 102)
- Default battery style: Circle with percentage
frameworks / SystemUI:
- Bigger app preview thumbnail sizes
- Smaller app thumbnail description text
- "KillAll button" in app switcher moved to bottom left
- Changed default smiley set to original HTC's
- Custom Wallpaper (thx, raw )
MMS / SMS app:
- Added ability to choose contacts for multiple recipients list via checkboxes
- Set delivery reports for SMS and MMS to enabled
- Set QuickMessage to enabled
- Use Dark Theme for QuickMessage
- Set Use full timestamps to enabled
- Changed default min MMS / SMS messages per thread to 20 / 250
- Increased max MMS size to 1MB
Settings:
- Changed Screen timeout entries to 30 / 60 / 90 seconds, rest is standard (translations only for English, Slowenian and German! Other languages will show default 15 / 30 / 60 values but use mine. Am too lazy to translate all the 50+ languages Feel free to translate your language and give me the patch.)
- Lowered system font sizes: Large in this build = Normal in official build, Normal in this build = Small in official build, Small in this build = not present in official and even smaller
- Lowered long press timeout selector values
- Increased max shown apps in BatteryStats from ten to twelve
LatinIME:
- Popups disabled
- Key repeat interval lowered
- Long press timeout lowered
- Long press shift timeout lowered
Phone:
- Set vibration to on
- Flip phone while call's coming in will mute it
- Deactivated noise suppression
Koush's SuperUser:
- Deactivated 3sec button timeout
Quick overview of changes / additions / removals etc. since initial release v1.0:
Enabled dual transfer mode for 2g in build.prop (not every carrier offers this)
Faster light env sensor auto brightness changes
changed source compiled QuickSearchBox with market variant -> no more FC's...? pls report
added Koush's Carbon Backup (now called "Helium", will be updated via market), ROM Manager and Microbes wallpaper
enabled DEADLINE and CFQ IO schedulers in kernel
media_profiles: changed vid rec file format from 3gp to mp4, increased 1080p vid bitrate to 15M
superuser: set "allow always" as default
updated fingerprint to 3.18.401.1
added facebook contacts sync
added /system/etc/qs.sh with my quicksettings layout: just execute it and reboot for taking effect (http://www.abload.de/img/8hf29.jpg)
CM backup scripts are back in: no reflash of gapps anymore when updating this ROM
added Camera pic/vid true preview option
smartmax gov updates
changed lockscreen targets to the ones i use
Click to expand...
Click to collapse
To keep this post clean, I've moved Download and Changelog to second post
Again and as always: I'm not responsible for any damage that may happen to your device when you flashed this. It's your own risk
some GITHUB stuff
NOTE: Factory reset / Wipe Data is recommended when coming from official CM10.1 or another version: in every case when there was a Sense ROM installed before, of course. You can try to leave data when coming from CM 10.1 staging or nightlies. But in case of problems you know what to do
boot.img reflashing only needed when installed for the first time or it is clearly stated here
Beside that, it's not allowed to put gapps inside a build as they are Google's stuff and closed source. You have to flash them manually, to be found HERE
Installation instructions:
Download ROM, of course
Download latest Google Apps package:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install both the usual way:
- copy it to your SDCARD
- install ROM zip in recovery
- install gapps zip in recovery
- do a Dalvik wipe in Recovery when you want to update this ROM
- reboot to bootloader
- flash boot.img which you should have extracted from ROM zip before
- do a fastboot erase cache, to be on the sure side
- reboot
Yeah, and then: have fun with it
More advanced description for preparing and flashing your phone for CM 10.1 by rawdealer (give him some thx pls )
rawdealer said:
*How to install ROM and gapps:*
Reboot to bootloader, connect your phone to PC via USB and enter following:
-fastboot erase cache
-fastboot flash boot boot.img (you can drag and drop file or enter exact name and path to it)
-fastboot erase cache
Reboot into the recovery
-wipe data/factory reset
-wipe system
-wipe dalvik
-wipe cache
-install ROM zip
-install gapps
Reboot system
If you didn't yet, you need to update your hboot, because it's a new kernel.
*How to upgrade hboot via fastboot:*
First, backup everything! ROM, apps etc etc and SD!!! Copy SD content to your computer, because it's very possible that your SD and recovery will be erased. I've upgraded from 0.94 ---> 1.39 and my SD, recovery were stay untouched. My friend did it from 1.12 ----> 1.39 and his SD and recovery were erased. Just in case
Check your cid number!!!
Enter following in CMD:
-fastboot oem readcid
Firmware with hboot 1.39 for region WWE x.xx.401.xx: http://htcfanboys.com/download/rawdealer/?action=view&file=16339
This firmware is for following cid numbers:
cidnum: HTC__001
cidnum: HTC__E11
cidnum: HTC__203
cidnum: HTC__102
cidnum: HTC__405
cidnum: HTC__Y13
cidnum: HTC__A07
cidnum: HTC__304
cidnum: HTC__M27
cidnum: HTC__032
cidnum: HTC__016
If you don't find your cid above, check here for firmware: http://forum.xda-developers.com/showthread.php?t=1957376
Now when you have the right firmware for your cid, you can upgrade your hboot in fastboot.
Enter following in CMD
-fastboot oem lock
-fastboot oem rebootRUU
-fastboot flash zip firmware.zip *(if you get error on this line enter command again!!! Immediately!)*
-fastboot flash unlocktoken unlock_code.bin (you need your unlock code to unlock bootloader again)
-fastboot flash recovery - you already know that
-fastboot flash boot - you already know that
flash rom and gapps (gapps-jb-20130301) in recovery - you already know that
Click to expand...
Click to collapse
Changelog:
Sat., Sept. 28th, 2013
- 4.0: see changelog and downloads here, pls
.
.
Older builds:
Sun., Sept. 1st, 2013
- 3.2f: see changelog and downloads here, pls
Wed., July 3, 2013
- 3.0: see changelog and downloads here, pls
Tue., June 11, 2013
- 2.5: see changelog and downloads here, pls
Mon., May 6, 2013
- 2.3: removed Mms: Add the ability to select recipients from a checkbox list
maxwen did a new version of this: i'll include his one in next build
- added MMS blacklist functionality
- synced up to newest sources' upstream, of course
- some rebasing stuff
- added possiblity to disable video recording metadata buffer. for disabling it add
debug.camcorder.disablemeta=1
in build.prop. this is a test for ascorbicbloggs' problem of non-correct rotation in some media players
- hmm, there for sure was more i don't remember atm: will add it when it comes back to mind
Thu., April 11, 2013
- 2.1: kernel reflash needed
- synced up to newest sources' upstream
- Blacklist functionality was merged in, rebase of my edits
- added maxwen's "true cam preview" option in camera settings: it enables you to show the real picture size when taking photos / vids no more cropping / stretching / etc. see here, pls and give him a big phat klick on the thx button
Wed., April 10, 2013
- 2.0.1: kernel reflash needed
- forgot a cherrypick for contacts, needed for blacklist functionality: thx, zopostyle, for pointing!
- you don't need to flash this update, when you don't plan to make use of phone number blacklist stuff!
Wed., April 10, 2013
- 2.0: kernel reflash needed
- added newest version of smartmax + max' new "extreme power saver" gov "smartmax_eps"
- added three new widescreen camera resolutions which are used in HTC's original cam app: 6mp wide, 3.7mp wide and 2.3mp wide
- added following non-merged commits:
- Add quick emoji button next to text input
- Mms: Add the ability to select recipients from a checkbox list
- Add option to mark user-rejected calls as missed
- Phone: Add Blacklist functionality
- Notification Light: add option to hide Custom Speed/Length part
- Feature: Bedtime calculator
- added maxwen's video preview fix commits:
- https://github.com/maxwen/android_p...mmit/65e70013413bf4a95d6856ef0e2f30052d39ea17
- https://github.com/maxwen/android_p...mmit/5aa8681355edc067f065904712c65d4253cffbca
- synced to latest cm upstream
- left in backup scripts: with this build installed from now on you can flash an update of this rom without reflashing gapps: presuming gapps are installed with this rom
Thur., April 4, 2013
- 1.6: - added facebook contacts sync
- added /system/etc/qs.sh with my quicksettings layout: just execute it and reboot for taking effect (http://www.abload.de/img/8hf29.jpg)
- cLock finally working again they changed yahoo api stuff accordingly to new
- changed lockscreen targets to ones i use (http://www.abload.de/img/t4ezc.jpg)
Tue., April 2, 2013
- 1.5:- made smartmax little bit more responsive
- revert fingerprint stuff -> updated to 3.18.401.1
- revert anti-ads hostsfile
- leave ro.cm.version at default (unofficial) for cm stats
i won't disable neither cm stats nor google analytics stuff i see no problems in them and will leave these parts unmodified. look also here, pls.
Wed., March 27, 2013
- 1.4: - testing: use cm fingerprint / build-description. on aosp there were no side effects (market etc). but this is cm... pls report if you encounter any problems like market incompatibilites etc!!
- little bit slower "reaction times" & animations (+50ms), this seems to have fixed...
- ...home button and longpress functions not working when no gapps are flashed
- left out only wifi png's
- made vibration little bit stronger for keyboard
- superuser: set "allow always" as default, so now a single tap on ok is all you need to tap when su requests arrive
- cm important updates: synced to latest sources, which include:
- fixed http://review.cyanogenmod.org/#/c/34162/, therefore present in newest build
- Settings: removed "Status bar visible" expanded desktop setting for devices without navbar
- FlingTracker can divide by zero and hang StatusBar in an infinite loop (Merged)
- Settings: remove Pie control for devices without navbar (Merged)
- IME : Fix sym key regression (Merged)
- Settings: disable expanded desktop on power menu disable (Merged)
Tue., March 26, 2013
- 1.3: synced to latest upstream: look here for the most important upstream changes
- added "bedtime calculator" http://review.cyanogenmod.org/#/c/34454/3
- added "option to mark user-rejected calls as missed" http://review.cyanogenmod.org/#/c/33664/
- reverted "fix up expanded desktop behaviour" http://review.cyanogenmod.org/#/c/34162/ : it was merged already but caused problems for our device (which officially doesn't support expanded desktop)
- further edits to media_profiles: changed file format from 3gp to mp4, increased 1080p vid bitrate to 15M (*hideandrun*)
- increased max possible sms per thread to 7,5k (yep, there are freaks who use this )
- accidentally left out some of my graphic edits they don't hurt when missing
Sun., March 24, 2013
- 1.2: synced to latest upstream: swap vol button when rotating was merged with an edit
- removed "always pull down quick settings when no ongoing notifications": causes laggy statusbar when enabled
- attempt to fix phone app fc: factory reset needed!
Sun., March 24, 2013
- 1.1: synced to latest upstream
- changed source compiled QuickSearchBox with market variant -> no more FC's...? pls report
- added Koush's Carbon Backup, ROM Manager and Microbes wallpaper
- enabled DEADLINE and CFQ IO schedulers in kernel
- auto-brightness: light env changes should be recognized faster now
- merged "always pull down quick settings when no ongoing notifications"
- added anti-ads hostsfile
- test: enable dual transfer mode in build.prop for 2g networks (not working for me and my provider O2; but maybe for you...?)
Sat., March 23, 2013
- 1.0: first release
Downloads: ROM
Version 4.0: see changelog and downloads here, pls
.
.
Older builds:
Version 3.2f: see changelog and downloads here, pls
Version 3.0:: see changelog and downloads here, pls
Version 2.5:: see changelog and downloads here, pls
Version 2.3
- CM 10.1 SE v2.3 - HTCFanBoys
- CM 10.1 SE v2.3 - DevHost
Version 2.1
- CM 10.1 SE v2.1 - HTCFanBoys
- CM 10.1 SE v2.1 - DevHost
Version 2.0.1
- CM 10.1 SE v2.0.1 - flashable update.zip for Contacts, needs 2.0 installed!
- CM 10.1 SE v2.0.1 - HTCFanBoys - FULL ROM
- CM 10.1 SE v2.0.1 - DevHost - FULL ROM
Version 2.0
- CM 10.1 SE v2.0 - HTCFanBoys
- CM 10.1 SE v2.0 - DevHost
Version 1.6
- CM 10.1 SE v1.6 - HTCFanBoys
- CM 10.1 SE v1.6 - DevHost
Version 1.5
- CM 10.1 SE v1.5 - HTCFanBoys
- CM 10.1 SE v1.5 - DevHost
Version 1.4
- CM 10.1 SE v1.4 - HTCFanBoys
- CM 10.1 SE v1.4 - DevHost
Version 1.3
- CM 10.1 SE v1.3 - HTCFanBoys
- CM 10.1 SE v1.3 - DevHost
Version 1.2
- CM 10.1 SE v1.2 - HTCFanBoys
- CM 10.1 SE v1.2 - DevHost
Version 1.1
- CM 10.1 SE v1.1 PHONE FORCE CLOSE FIX! Flash this in recovery when you experience a FC of phone app.
- CM 10.1 SE v1.1 - HTCFanBoys
- CM 10.1 SE v1.1 - DevHost
Version 1.0
- CM 10.1 SE v1.0 - HTCFanBoys
- CM 10.1 SE v1.0 - DevHost
Downloads: bootanimation
download bootanim of your choice
establish an adb connection to your phone
run
- adb push cm_bootanimation.zip /system/media/bootanimation.zip or
- adb push nexus_bootanimation.zip /system/media/bootanimation.zip or
extract rom zip file, copy bootanim inside correct location and rename it to bootanimation.zip
re-zip it and flash
Questions and answers / faq
FAQ:
Q: How do I activate Development Settings or Performance Menu?
A: Tap 7 times on Build Number in About Phone section in Settings
Q: Why is adb still not working?
A: k, first things you should know about 4.2.2 and ADB: http://www.androidpolice.com/2013/0...s-from-stealing-your-data-in-some-situations/
This feature is deactivated in this ROM, but anyway, you should install latest bins.
Second: it doesn't work with USB Mass Storage (short = UMS) option Switch to MTP and it will work
You can use this zip with newest adb bin from rawdealer: https://dl.dropbox.com/u/24435867/Android Stuff/Tools/ADB-new.zip
Q: Where do i find latest Google-Apps package?
A: On http://goo.im/gapps. Take the newest one and flash it after you flashed the ROM.
Q: ...and wtf is up with file transfer on mac...?! It doesn't work
A: Try to switch to USB Mass Storage mode (from MTP mode, which is standard in this ROM), because MAC doesnct support MTP natively. You can try this app for mac too: http://www.android.com/filetransfer
MTP mode should work then on MAC
reminder for next build's changes:
- lower press back kill app timeout
O C U again!
Re: [ROM] [CM-10.1] [March 23., 2013] CyanogenMOD 10.1 SE v1.0
2nd downloading just a question ll WiFi tether work
Sent from my HTC One X using xda app-developers app
jep, worked in a quick test
- Koush's Carbon Backup is included
- Anti-Ads hosts file
not included in first build!
This ROM has all changes, that I needed it stock CM 10.1
Hope it is as fast as stock one
Thanx!
should be, even lil bit faster
Awesome ... Downloading it now
Re: [ROM] [CM-10.1] [March 23., 2013] CyanogenMOD 10.1 SE v1.0
after the long wait!
Sent from my HTC One X using Tapatalk 2
WiFi speed is very slow. The signal is excellent.
Is this happening to someone else?
New ROM!
Finally!
:cyclops:
have fun and excuse my lazyness
@wifi: it's exactly the same as in nightlies or staging builds. how did you set up it? or did you flash another kernel?
seadersn said:
@wifi: it's exactly the same as in nightlies or staging builds. how did you set up it? or did you flash another kernel?
Click to expand...
Click to collapse
I follow the Installation instructions.
The kernel is stock.
you took over old data? or fresh install w/ factory reset?
i've speeds > 2,5mb/s @internet and lan is over 8mb/s.
seadersn said:
you took over old data? or fresh install w/ factory reset?
i've speeds > 2,5mb/s @internet and lan is over 8mb/s.
Click to expand...
Click to collapse
Fresh install with factory reset.
Edit:
I just opened the Internet browser, it sign me on to Google automatically,
and the speed is now OK.
Thank you for this ROM.
I have installed the"CyanogenMOD 10 "SE" v2.2". How do i get adb devices to show this device ? (Win 8)
Only thing i get in the device manager is "Portable device - HTC One X" and it has a driver installed . No problem here.
I can see the internal storage.
Some help ? Thank you
that's stuff for third post maybe: developer settings are activated? you know how to, if not activated already? tap 7 times on build number in about phone section to activate performance and debug settings. and tap 7 times on cyanogenmod version for a little game with cid :ugly:
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
To take a screen shot, just slide left
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Galaxy Nexus S 4G (crespo4g)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
http://d-h.st/users/philz_touch/?fld_id=16785#files
Click to expand...
Click to collapse
5.05.0 (26.05.2013)
- fix potential memory overflow during computing of size stats in backup
- fix /efs backup not possible for devices without /preload, unless preload menu was selected once
- fix custom nandroid and twrp backups for yaffs2 devices (do not force tar format on these)
- misc fixes for supporting more devices mainly during nandroid jobs:
* allow use of device2 for raw backup and restore operations (using dd/cat)
* better nandroid support when device names in fstab do not match actual mtd name (revert statfs for volume->device)- revert cm-10.1 changes: Write correctly fstab info in log (do not print to stderr)
- merge old custom_backup folder to cwm backup folder
- old .efs_backup and .modem_bin folders also should be moved to clockworkmod/backup
- .aromafm folder is now aromafm (no more hidden folder for this)
- add regenerate md5 sum option for nandroid backups (use with caution)
- revert inverting fstype and fstype2 (see github commit for more info on this)
- fix nandroid backup fails before generating md5 for /external_sd devices when card is not inserted/mountable (.android_secure check)
- fix falling back to system mount command will fail when calling ensure_path_mounted(filename)
- htc desire x (protou) support added
- htc droid incredible 4g lte (fireball):
* add support
* allow sd-ext and mount external sd in ext4
* allow backup/restore of /radio- galaxy s4 - i9505:
* support emmc partitions size detection during nandroid jobs
* fix exfat mount for some sdcards (thanks to chenglu)- nexus s/4g (crespo/crespo4g):
* allow raw + yaffs2 backups for /efs and /radio
* allow size detection for mtd partitions during nandroid backup
* fix device name to samsung nexus s
* repack with stock gb kernel to fix usb mount in recovery- nexus 10: Enable efs backup and restore
- galaxy nexus (maguro/toro/toroplus): Enable efs backup and restore
Click to expand...
Click to collapse
Most changes are in nandroid backup operations and external storage mounting
Please test this and report any bugs with a log
To get a log:
- Advanced / Report Error
- Attach here the /sdcard/clockworkmod/philz_recovery.log file
If phone is hanguing and cannot export a log because sdcard is not being mounted:
- adb pull /tmp/recovery.log
- attach the recovery.log file
At worst:
- Reboot into main system, not recovery (adb reboot can achieve it when needed too)
- Grab /cache/recovery files (last_log, last_install)
Click to expand...
Click to collapse
v5.06.1
5.05.0 --> 5.06.1
5.06.1 (02.06.2013)
- HTC One: move to new m7ul device tree
5.06.0 (01.06.2013)
- support dual modem devices nandroid operations (dual sim, i9505)
- merge cm-10.1 changes: support version 2 (2048-bit e=65537) keys in recovery
- Nexus S/4G (crespo/4g): add mmcblk names to recovery.fstab to fix /data mount
- HTC Desire X (protou): support both protou-ics and protu-jb fstab
5.05.9 (31.05.2013)
- do not write backup size progress to log file
- show total time after restore job
- write backup path to log
5.05.7 (30.05.2013)
- use bigger 23x41 roboto font for HD devices (i9500, i9505, Nexus 10)
- do not uselessly statfs partition to refresh backup size progress if we're under NICE_INTERVAL (100ms)
- show backup compression 0% when backup is tar format and compression is disabled
- fix get time events during nandroid jobs and touch events
- universal scroll sensitivity and row height settings (fix hypersensitivity for HD devices)
- fix backup size progress for datamedia devices (special thanks to pickandwhammy for the time he spent in debugging this and providing logs)
- merge Get_Folder_Size() changes from twrp 2.5
- misc logging improvements
- small bug fixes
Click to expand...
Click to collapse
Released v5.08.5
Change list 5.07.1 ---> 5.08.5
5.08.5 (11.07.2013)
- Compile Aroma File Manager (by amarullz) zip installer under recovery:
* either compile whole recovery, zip will be created at first pass
* or only compile aroma zip installer in two pass:
1- mmm bootable/recovery/aromafm
2- mmm bootable/recovery/aromafm/tools
* output: [target_out]/aromafm_out/aromafm_[DeviceID].zip
- detect aroma compatibility with non NEON devices during compiling
- use less conflicting flags: TARGET_NAME --> TARGET_COMMON_NAME
5.08.0 (07.07.2013)
- improve nandroid progress bar update
- fix recovery was not prompting when backup estimated size is larger than free space
- add ors backup support for twrp format requested by BillGoss
- ors backup: when no backup name is given, generate it using same way as nandroid operations (time stamp + rom name tag)
- support separated compiling for Loki patched devices (S4 AT&T and Verizon)
- i9505: revert some changes to fix time bug for some users
- Galaxy S4 US variants: repack around Audism stock JB 4.3 kernel v3 + Samsung exfat modules + revert use of mkefs for partition corruption issue
- fix missing break in set backup compression value menu (misc_nandroid_menu())
- misc clean up code
- sync latest sources
5.07.6 (05.07.2013)
- update version 6.0.3.3
- add exfat-fuse 1.0.1.362 / 2.9.2 optional support by enabling USE_EXFAT_FUSE_BIN CFLAG in BoardConfig (exfat support on cyanogenmod repacks)
- i9505: use Audism kernel v3 (Stock Samsung sources) to fix partition corruption without additional code and for better exfat support
Click to expand...
Click to collapse
Please Note: Device specific threads will no longer be updated. I monitor them for support and feedback though
To check if you have a new version, subscribe to main thread:
http://forum.xda-developers.com/showthread.php?t=2201860
Thank you for your understanding
Any plans for crespo4g? Love this recovery.
kijp15 said:
Any plans for crespo4g? Love this recovery.
Click to expand...
Click to collapse
It is for crespo4g. Just a little typo I believe.
Sent from my Nexus S 4G using XDA Premium 4 mobile app
update to v6.00.5
Phil3759 said:
update to v6.00.5
Click to expand...
Click to collapse
I have heard about your recovery for ages now but I guess I didn't have a phone that you made the recovery for until my old NS4G. Its actually very nice! It also properly installed CM11 zip but TWRP didn't
Sent from my Nexus S 4G using Xparent Gray Tapatalk 2
Team Win Recovery Project !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Permanent TWRP Recovery 2.8.1.0
Huawei Ascend P6
Changelog :
Code:
What's new in 2.8.1.0 :
[LIST]
[*] MTP fixes and improvements - you can now copy zips to the root of storage - thanks to _that
[*] TrueType Font support - optional as it takes up a decent amount of space so may not be available on all devices - thanks to Tassadar
[*] Temperature support - thanks to bigbiff
[*] Various other bugfixes and tweaks
[/LIST]
What's new in 2.8.0.0 :
[LIST]
[*] Add MTP support to recovery thanks mostly to bigbiff with a little help from Dees_Troy
[*] Add command line capabilities - you can now execute various TWRP features via adb instead of the touchscreen
[*] Add support for color in the console and give error, warning, and highlight lines different colors
[*] Track backup and restore progress based on file sizes to provide a much more accurate indication of progress
[*] Improve handling of /misc thanks to mdmower
[*] Improve setting of time on Qualcomm devices thanks to [NUT]
[*] Allow using images on slidervalue GUI objects thanks to Tassadar
[*] Allow using variables and addition and subtraction in variables for easier theming
[*] Add support for 1440x2560, 280x280, and 320x320 resolutions and update 240x240
[*] Allow ui.xml file to include additional xml files to help break up the theme and make TWRP easier to maintain
[*] Other minor fixes and improvements
[/LIST]
What's new in 2.7.1.0 :
[LIST]
[*] Add GUI option to change or repair file systems on individual partitions. The change is destructive so backup your data including internal sdcard first. This option should make it a little easier to migrate a device from ext4 -> f2fs, for instance. You will find this option under Wipe -> Advanced Wipe, then select only one partition and then press the Repair or Change File System button. If a developer has added f2fs support for your device and we don't have it in TWRP, please contact me via PM to arrange for it to be added.
[*] Various bugfixes to backup and restore
[*] Improvements to USB storage handling
[*] Added a class to search for files to make finding the correct brightness file automatic in most cases
[*] Various other bugfixes and tweaks
[/LIST]
What's new in 2.7.0.0 :
[LIST]
[*] Faster graphics rendering by disabling alpha blending on fully opaque objects thanks to Tassadar
[*] Allow sideloading from /tmp on encrypted devices
[*] Check for a crypto footer before asking for a password to prevent user confusion
[*] Additional checks for validity to auto generated backup names
[*] Text wrap in the console output
[*] Proper caps lock support in the keyboard
[*] Mouse support via USB OTG for devices with a broken digitizer
[*] Improve scanning of storage locations for OpenRecoveryScript
[*] Haptic feedback for buttons, keyboard, and vibration at the end of longer running actions
[*] Fixed ext4 wiping when no selinux contexts are defined for that partition (e.g. sd-ext)
[*] Update SuperSU to 1.93 and improve installation process
[*] Added selinux contexts restoration to fix permissions
[*] Load RTC offset on Qualcomm devices to fix the date/time in recovery
[*] USB Mass Storage fixes Add SELinux support checking
[*] Add Disk Usage class to better handle excluded folders (e.g. Google Music cache)
[*] Add 4.4 AOSP decrypt support
[*] Add some toolbox utilities to TWRP (namely to support SELinux functions not supported in busybox)
[*] Various SELinux fixes and bug fixes
[/LIST][CENTER][/CENTER]
Downloads :
Code:
[CENTER]
* [B][I][FONT="Courier New"][COLOR="DeepSkyBlue"][SIZE="3"]New Update :[/SIZE][/COLOR][/FONT][/I][/B] [URL="http://forum.xda-developers.com/showpost.php?p=56615625&postcount=170"]TWRP 2.8.1.0[/URL] !
* [URL="https://www.androidfilehost.com/?fid=23622183712471258"]openrecovery-twrp-2.8.0.0.img[/URL]
* [URL="https://www.androidfilehost.com/?fid=23622183712471268"]openrecovery-twrp-2.8.0.0.zip [/URL]
* [URL="http://www.androidfilehost.com/?fid=23501681358547533"]openrecovery-twrp-2.7.1.0.img[/URL]
* [URL="http://www.androidfilehost.com/?fid=23501681358547536"]openrecovery-twrp-2.7.1.0.zip[/URL]
* [URL="http://www.androidfilehost.com/?fid=23329332407584760"]openrecovery-twrp-2.7.0.0.img[/URL]
* [URL="http://www.androidfilehost.com/?fid=23329332407584761"]openrecovery-twrp-2.7.0.0.zip[/URL][/CENTER]
Installation :
Code:
[CENTER]
* [FONT="Arial Black"]Make Sure That Your Device Already Running Android Version KitKat ![/FONT]
*[FONT="Arial Black"] Image File ( openrecovery-twrp-2.8.0.0.img ) :[/FONT]
[LIST]
[*] boot your device in bootloader mode by :> adb reboot bootloader
[*] flash custom recovery :> sudo fastboot flash recovery openrecovery-twrp-2.8.0.0.img
[*] reboot your device :> sudo fastboot reboot
[/LIST]
* [FONT="Arial Black"]Zip File ( openrecovery-twrp-2.8.0.0.zip ) :[/FONT]
[LIST]
[*] copy this archive in your device ( internel/external storage )
[*] boot your device in previous TWRP 2.7.1.0 : > adb reboot recovery
[*] flash zip file
[*] reboot to system
[*] next reboot in recovery will be on TWRP 2.8.0.0 instead TWRP 2.7.1.0 !
[/LIST]
[/CENTER]
Issues :
Code:
[CENTER]
* Internal Storage Not Mount ;
* Wipe -> Advanced Wipe -> Internal Storage -> Repair or Change File System -> Cannot Be Done : [B][COLOR="Red"]Invalid partition selection[/COLOR][/B] ;[/CENTER]
Source :
Code:
[CENTER]* [URL="https://github.com/TeamWin/Team-Win-Recovery-Project/tree/twrp2.7"]TeamWin GitHub[/URL] !
* [URL="https://github.com/omnirom/android_bootable_recovery/tree/android-4.4"]omnirom github[/URL] !
* [URL="https://github.com/surdupetru/twrp"]Huawei P6 TWRP - GitHub[/URL] [/CENTER]
Credit :
Code:
[CENTER]* [URL="http://teamw.in/project/twrp2"][B]Team[COLOR="RoyalBlue"]Win[/B][/COLOR][/URL]
* [URL="http://forum.xda-developers.com/showthread.php?t=1943625"]Dees_Troy[/URL][/CENTER]
regards,
Surdu Petru
Revert To Stock Recovery KitKat
Downloads :
Code:
[CENTER][FONT="Arial Black"]* Stock Firmware Huawei B510 KitKat :[/FONT]
* boot.img image format : [URL="http://www.androidfilehost.com/?fid=23501681358546458"]boot.img[/URL]
* recovery.img image format : [URL="http://www.androidfilehost.com/?fid=23501681358546459"]recovery.img[/URL]
[/CENTER]
Code:
[CENTER][FONT="Arial Black"]* Stock Firmware Huawei B506 CN KitKat :[/FONT]
* boot.img image format : [URL="http://www.androidfilehost.com/?fid=23329332407584770"]boot.img[/URL]
* boot.img zip format : [URL="http://www.androidfilehost.com/?fid=23329332407584771"]stock-506-boot.zip[/URL]
* recovery.img image format : [URL="http://www.androidfilehost.com/?fid=23329332407584772"]recovery.img[/URL]
* recovery.img zip format : [URL="http://www.androidfilehost.com/?fid=23329332407584773"]stock-506-recovery.zip[/URL][/CENTER]
Installation :
Code:
[CENTER]* flash stock boot.img in bootloader mode : > fastboot flash boot boot.img
* flash stock recovery.img in bootloader mode : > fastboot flash recovery recovery.img
* reboot your device from bootloader mode : > fastboot reboot
* zip files : stock-506-boot.zip & stock-506-recovery.zip must be installed under custom recovery TWRP ![/CENTER]
Oooh! Awesome job!
Thanks for your amazing job surdu!!
Enviado desde mi P6-U06
surdu_petru said:
Team Win Recovery Project !
[*] Faster graphics rendering by disabling alpha blending on fully opaque objects thanks to Tassadar
Click to expand...
Click to collapse
Faster graphics rendering only in recovery and does not mean better gamming performance right???
Thanks for this !! u'r awsome!
Thanks surdu!
BTW is this official build? Just wondering.
EDIT:
Tried flashing the boot.img, resulted with my wifi not working on OMNI ROM.
I reflashed the boot.img from the omni.zip, and now its working. idk.
Here I made an user friendly cmd installer for TWRP 2.7.0.0. If you guys want to, take a look here.
http://forum.xda-developers.com/showthread.php?t=2709607
Will it work if I flash Stock 506 boot and recovery and then run B125 on top of that?
Or MUST JB use its own boot and recovery and KK its own boot and recovery?
Thank you,
Falci
RicardoA said:
Faster graphics rendering only in recovery and does not mean better gamming performance right???
Thanks for this !! u'r awsome!
Click to expand...
Click to collapse
Yes, available only in recovery !
bokchoi2020 said:
Thanks surdu!
BTW is this official build? Just wondering.
EDIT:
Tried flashing the boot.img, resulted with my wifi not working on OMNI ROM.
I reflashed the boot.img from the omni.zip, and now its working. idk.
Click to expand...
Click to collapse
Stock boot.img is ONLY for Stock Firmware and not for custom rom !
Not yet official, cause I have some issue packing boot/recovery-ramdisk from OmniROM ! As soon as I solve this problem, will be also officially launched.
Falcifer said:
Will it work if I flash Stock 506 boot and recovery and then run B125 on top of that?
Or MUST JB use its own boot and recovery and KK its own boot and recovery?
Thank you,
Falci
Click to expand...
Click to collapse
Yes, this is true : " Or MUST JB use its own boot and recovery and KK its own boot and recovery"
Awsome work. Flashed and works like a charm again (as we're used to with all yr works). Looking forward to use 2.7.0.0 to flash yr future OMNI rom updates or possibly CM11 full release.
Cheers!
Good News !
Hello !
Slow development on our device, but what is essential that is not stopped ...
While I managed to solve all issues related to build TWRP from source ( now resulting recovery.img from build can be flashed without any modificattion ) , I'll start to push my source code to omnirom github - in this way TWRP will be officially and it could be installed directly from GooManager !
So, this point was achieved !
If you wonder how it was possible
> first , to use all features of this TWRP, we will need to perform a few small changes :
1° 100% compatibility with custom rom based AOSP , unsure whether they will be ( CM, AOKP, Carbon, Pac-MAN, OmniROM & .... )
2° on custom rom based stock Huawei Firmware, Internal Storage will not be available ( other functions will be not affected ) - so rom developers need to make some changes on ramdisk from their boot.img - in order to bring full access to Internal Storage on TWRP !
If I'll have some free time, tomorrow I'll start to push source code also on omnirom github !
For moment only TWRP will be officially, following later to do the same thing with OmniROM !
Best Regards !
Hi!
A final test, will be out here soon !
Will be exactly like the official version, or downloadble from GooManager when will be available for our device !
This version, will make some change in our device regarding Internal Storage !
After flashing this version ( fastboot flash recovery openrecovery-twrp.img ) on your device , you also need to flash an update.zip for custom rom based Huawei Stock Firmware KitKat, and currently also for OmniROM - in order to bring full access for Internal Storage on TWRP !
Downloads :
* custom TWRP 2.7.0.0 recovery : openrecovery-twrp-2700.img
* update_sdcard_stock.zip
* fixed : new update update_sdcard_aosp.zip
Installation :
* install TWRP : fastboot flash recovery openrecovery-twrp-2700.img
* if you use stock Huawei KitKat B506 or other custom rom based on this firmware , please flash update_sdcard_stock.zip on your TWRP !
* if you use the last update OmniROM , please flash update_sdcard_aosp.zip on your TWRP !
Please, after test ( install ) let me know how it work on your device ( if you have issue with Internal Storage on your recovery TWRP or in your ROM ) !
Please report if it's OK in stock Huawei B506 , cause should be work fine ! ( report after flashed the new TWRP from here and also after flashed update_sdcard_stock.zip )
Thank you very much for your confirmation, in this way you help me to get it official !!!
Info:
After flashing this new TWRP, your old internal sdcard path will not be removed, so you can still navigate to : /data/share/0 to see all your files on internal sdcard !
The new path for internal sdcard is now /data/media/0 , so if you want to keep this new twrp , you must manually copy and remove all files from /data/share/0 to /data/media/0 !
Edit :
Final source code for building TWRP from source , pushed on my github ! OP also updated !
Best Regards !
i'm on omni and i get bootloop after install this ( last update ) !
any help surdu ? Tnx for your hard work on this phone !
amin-DESIRE-c said:
i'm on omni and i get bootloop after install this ( last update ) !
any help surdu ? Tnx for your hard work on this phone !
Click to expand...
Click to collapse
Do you already do it like this :
> adb reboot bootloader
> fastboot flash recovery openrecovery-twrp-2700.img
> fastboot reboot
Sure, now your device will not boot ( you will be on bootloop ) , but you must go on :
> adb reboot recovery
> and flash here update_sdcard_aosp.zip !
Now your device will boot fine !
Thanks !
I tried it, I only get External USB working on Ubuntu.
On Windows, they Internal and External mount doesn't work for me.
In device manager (windows), when I mount the USB, there is no new device that is shown.
I flashed the update_aosp.zip for the OMNI ROM, still same issue.
Am I doing something wrong?
Also, getting a bootloop.
bokchoi2020 said:
I tried it, I only get External USB working on Ubuntu.
On Windows, they Internal and External mount doesn't work for me.
In device manager (windows), when I mount the USB, there is no new device that is shown.
I flashed the update_aosp.zip for the OMNI ROM, still same issue.
Am I doing something wrong?
Also, getting a bootloop.
Click to expand...
Click to collapse
Thank you for testing !
Maybe I was not clear, please let me doing some tests with stock firmware !
Thanks !
Edit :
I think we need to wipe all on the new twrp ( apart external storage ) , than upplay update_sdcard_stock/aosp.zip in the new twrp !
I'll make more tests and I'll confirm later !
OK !...was my fault , is boot.img issue under update_sdcard_aosp.zip ( update_sdcard_stock.zip it's ok - checked right now - but wasn't tested yet ) ! I'll reupload very soon new update_sdcard_aosp.zip ! Thanks !
Ok, right now fixed and also tested : Just wipe cache & dalvikl after flash the new update_sdcard_aosp.zip !
Tested right now, ( I'm on OmniROM ) - the new openrecovery-twrp-2700.img with the new update_sdcard_aosp.zip and work very well ! I can see on Win 7 the both storage when I connect my USB cable via MTP ! Also I can see on Win 7 my external sdcard on recovery mode by checking : Mount -> Mount USB Storage
This time I had no bootloop, so thats fine. But still doesn't see the USB.
I had to go to Device Manage > USB Serial Bus controllers > USB Mass Storage Device --> Right Click, Update driver --> Then now I have external USB storage, still no Internal USB storage on TWRP.
Is necessary to update the TWRP 2.6.3.7 to this version?
thanks
On Stock B509 works perfectly no issues at all!
But why you changed the place of the internal storage? And when I now flash OMNI for example must I flash the aosp fix afterwards or is it than already done?
EDIT: You must flash the update_sdcard_aosp.zip otherwise you will have a bootloop
taaeem said:
On Stock B509 works perfectly no issues at all!
But why you changed the place of the internal storage? And when I now flash OMNI for example must I flash the aosp fix afterwards or is it than already done?
EDIT: You must flash the update_sdcard_aosp.zip otherwise you will have a bootloop
Click to expand...
Click to collapse
Huawei has a custom path for Internal Storage ! Almost all device has Internal Storage on /data/media or in a separate partition like : /dev/block/../sdcard !
Huawei Ascend P6 keep Internal Storage to /data/share and also we have no partition for mount Internal Storage ( so there is no /dev/block/../sdcard ) !
For bring officialy TWRP in our device , we need to change Internal Storage path from /data/share to /data/media , why ? - because TWRP is made for most devices that support Internal Storage to data/media !
I have installed it and it works great no bootloops no problems. Runing on stock B506
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YOU MUST BE ON THE ASUS STOCK JB 4.2.1 BOOTLOADER VERSION ENDING IN 27.1 or 27.5 AND TWRP 2.6.3.2+ OR CWM 6.0.4.6+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
You must do a full wipe in recovery if coming from another ROM base. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 10 mins to stabilise!
Features and Tweaks
This ROM is based from OMNI AOSP sources
Supports EXT4 and F2FS Data partitions
Based off omni-4.4.4-20141030-zombi_tf300t-KANG source by lj50036/hardslog
Full Aroma Installer for main rom including choice of 3 kernels and ROM2SD/DATA2sd/F2FS support
Remixed _thatv11 kernel with OMNI ramdisk - repacked by sbdags/lj50036
Grimlock kernel with OMNI ramdisk and _that init - by hardslog
DPI Size: 213 (TF700 recommended small fonts), 240 (Stock fonts), 224 (Medium fonts) & 200 (Small fonts), 180 (Tiny fonts) & 160 (Specsavers fonts)
Launchers: Omni, Google Experience Launcher, Apex , Nova
Boot Animations: ZOMBi-X, Android-L, Nexus Phase Beam
Gapps (updated by me to Google latest apks and libs)
Misc Apps: ESFile Explorer, Adobe Flash, AdAway, Titanium Backup, Keyboard Manager
Asus Apps: Compiled by kansasboy001; Asus Battery Widget, Asus Calculator, Asus Calendar, Asus Clock, Asus Dayscene Live Wallpaper, Asus Dictionary, Asus Email, Asus Gallery, Asus Keyboard, Asus Photo Story, Asus Sound Recorder, Asus Tasks, My Frame, My Water I & II, Asus Supernote Pro, Weather & Time Widget, Asus Framework, Asus Settings, Asus Audio (V4A), Asus Contacts, Asus File Manager(Root Browser), Asus Camera, Asus Browser
Tweaks: File system and performance optimised, Init.d support!, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option to enable / disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Option to enable / disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Tip 1: Go to Settings - About Tablet, Click build number 7 times
Now you will see Developer Settings & Performance menus
[*]Tip 2: In Dev Settings, enable advanced reboot & change window animation,
transition animation & animator scales down to 0.2x for extra snappiness
[*]Tip 3: FLOATING WINDOWS: Settings - Interface - more... - Omni Switch
Bug List
[*] Dock works as do most special keys - just no battery available in the system bar
Change Log
20141030 Beta 5 changes
- Merged tinted status bar into ZOMBi
- Tweeked muti-window [issues with tinted window]
- Added SU as a prebuit [updateable from the playstore]
20141006 Beta 4 changes
- FIxed dock battery reporting with app/widget ! Thx @hardslog
20141002 Beta 3 changes
- Added thatv11 to installer
- Added Grimlockv4 to installer
- Fixed BT not turning on without rebooot
- Fixed Bluethooth Share crash on first boot
- Fixed Dock battery reporting (needs an app/widget to work)
- updated dolphin browser to version 11.2.3
- updated google tts to 3.2.12
- updated google music to version 5.6.1523p
- updated google mail to version 4.9
- updated google search to version 3.6.14.1337016
- updated google talkback to version 3.5.2
- updated google play store to version 4.9.13
- updated google core services to version 5.0.89
- updated youtube to version 5.10.1.5
- updated apex launcher to version 2.6.0
- updated adaway to version 2.9.1
20140829 Beta 2 changes
- Fixed issues with Root being lost - reverted to cm11 ramdisks rather than omni as this was causing the issue
- SuperUser and SU Binary updated to version 2.0.2
- Dynamic fsync properly enabled on Grimlock kernel when fsync disabled selected in installer
20140826 Beta 1 changes
- New Base - Rebuilt from latest source which has updated bluetooth config - thanks lj50036
- 90% of dock should be working - battery display is not
- Added CM11 Kernel as option in installer - runs well
- Themed framework with a splash of RED
- Final Tweaks to Aroma Theme
- Updated GravityBox to version 3.3.3
- Removed DropBox as bloatware (30MB!) - still available on the Play Store
- Removed Google Plus as bloatware (33MB!) - still available on the Play Store
- Small changed to aroma themes to fix dark text on dark backgrounds
- Changed the transition config in aroma to see if it fixes screen freezes
- Fixed installer script to allow rom2sd on grimlock kernel install
- Fixed aroma freezes - or reduced them
- Re-themed Zombi-X aroma theme
- Updated performance switch for CPU to allow OC to 1800 on _that's kernel
- Fixed correct rom version in the build.prop
- Updated SU Binary to latest version
- Updated Chrome, Gmail, Google Now, YouTube
- Added Android Terminal to ROM
- New Red Aroma Theme for Zombi-X - requires less memory
- Initial release - omni cromified after source build
- Added SuperUSer and su binary for root capability
- Browser tweaked for speed and touch smoothness
- Added all the CROMBi/CROMi goodness to the base rom
- Aroma tuned for ZOMBi-X
Click to expand...
Click to collapse
The Team
@sbdags - Creative Mastermind (From CROMi-X/CROMBi-kk ROMS)
@lj50036 - Source Guy (From CROMBi-kk ROMS)
@hardslog - The Canadian (From Grimlock ROMS)
Credits
Google, wow is all I can say!
Omni Team - Thanks!
@_that For all the great advice, watching over us and fixing everything we break!!!!!
All the beta testers for your patience and feedback : BxMxK, canito10, duckredbeard, mikew29, nameneeded, cgf, cyberknight2001, Mikey1969, Ozark_8125, tiernan22, boldnuts, tonyh51, Vathan, erisi, Thibor69
To Do
Fix Buetooth and other little bugs
XDA:DevDB Information
ZOMBI-X, ROM for the Asus Transformer TF300T
Contributors
lj50036, sbdags, hardslog, _that
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: bootloader ending in 27.1 or 27.5
Based On: OMNI AOSP
Version Information
Status: Beta
Current Beta Version: 20141008
Beta Release Date: 2014-10-08
Created 2014-09-18
Last Updated 2014-10-02
DOWNLOADS!
UPGRADE INSTRUCTIONS
Steps
1. If you haven’t yet, unlock your TF300 by now following these instructions.
2. Install the latest version of Team Win Recovery Project (TWRP) 2.6.3.2+ or ClockWorkMod Recovery 6.0.4.6+ Note this ROM will NOT install with older versions of recovery!
OFFICIAL TWRP 2.8.1.0
Flashable zip being made ....
FLASHING THE ROM FROM RECOVERY
Steps
1. Download the ROM below and save to your internal or external SD Card. Do not unzip the file.
ZOMBi-X ROM DOWNLOAD
Note: The first boot after install will take 10 mins whilst everything is built. Some people might think it is looping but it is not
ZOMBi-X Beta 3 Full Mirror 1
ZOMBi-X Beta 3 Full Mirror 2
ZOMBi-X Beta 3 Full Mirror 3
BOTH FILES ARE SIGNED. IF YOU ENABLE SIGNATURE VERIFICATION IN RECOVERY IT WILL VALIDATE THE FILE BEFORE FLASHING.
ASUS APPS DOWNLOAD - Flash from Recovery : Compiled by kansasboy001
Don't forget ROM2SD1.zip / DATA2SD1.zip first if you are not running an internal setup
Asus Battery Widget, Asus Calculator, Asus Calendar, Asus Clock, Asus Dayscene Live Wallpaper, Asus Dictionary, Asus Email, Asus Gallery, Asus Keyboard, Asus Photo Story, Asus Sound Recorder, Asus Tasks, My Frame, My Water I & II, Asus Supernote Pro, Weather & Time Widget, Asus Framework, Asus Settings, Asus Audio (V4A), Asus Contacts, Asus File Manager(Root Browser), Asus Camera, Asus Browser
[THREAD][APPS] [ASUS Apps][ CROMBi-kk & ZOMBi-kk]
ROM2SD/DATA2SD USERS PLEASE READ!
ROM2SD only works if you have ZOMBi-X, CROMBi-kk, CROMi-X or miniC flashed on internal with a THATv10+ kernel. Just choose ROM2SD in the installer of ZOMBi-X to flash it to ROM2SD and the installer will do the rest.
- Install ZOMBi-X and choose ROM2SD or DATA2SD install
The ROM2SD1.zip below is only needed if you need to switch your recovery to between normal and rom2sd mode. For Example you want to backup or restore a rom2sd installation. Flash once to go rom2sd and flash again to go back to normal. A reboot always puts you back to normal. Thanks to _that!
ROM2SD1.zip Download Mirror 1
ROM2SD1.zip Download Mirror 2
MD5 Sum: 7b699136d59ea3d5538570ccaf422acf
The DATA2SD1.zip below is only needed if you need to switch your recovery to between normal and data2sd mode. For Example you want to backup or restore a data2sd installation. Flash once to go data2sd and flash again to go back to normal. A reboot always puts you back to normal.
DATA2SD1.zip Download Mirror 1
DATA2SD1.zip Download Mirror 2
MD5 Sum: 9d5e9e2fd32593f981624499b37924b2
2. Boot to recovery – Either choose Boot to Recovery from the Power Menu if available on your current ROM or from the tablet power off hold the [volume down] button and press the [power] button. Once your see the flashing RCK icon, press [volume up] to select. If another icon is flashing use [volume down] to move between icons.
3. Using your recovery make a Nandroid Backup of your current setup
4. Select install and navigate to where you saved your ROM zip file.
5. Choose the ZOMBi-X zip file and follow the on screen prompts to customize your installation.
6. Reboot and enjoy.
Using GParted to setup a micro SD for ROM2SD or DATA2SD support
First and foremost - DO NOT USE MINI TOOL!
Formatting a micro sd card for ROM2SD
Note for DATA2SD just do one partition in stead of 2
We will be using a GParted Live boot USB and a FAST good quality micro sd like a Sandisk or Samsung Class 10 - SDHC/SDXC UHS-1 card with read speed of at least 20MB/S. If you have a cheap chinese eBay card don't bother - they are not good enough.
You will also need a USB Stick with at least 1GB size. Note this process formats the USB disk so don't keep any important files on it. It will also wipe your micro sd so make sure you are prepared.
1. Go to the link below and download the GParted Live CD/USB/HD/PXE Bootable Image and save it somewhere you remember
http://gparted.sourceforge.net/download.php
2. Download Linux Live USB Creator and install it
http://www.linuxliveusb.com/
3. Fire up LiLi USB Creator:
a. Choose your USB key - I,e, the drive letter for your USB (not sd card)
b. Choose your GParted iso image for the source
c. Choose the check box to Format Key in FAT32 and hide files
d. Click the lightning bolt to create
4. Now you have a bootable disk you need to boot from it. You may need to alter you BIOS Settings on your PC to boot from a USB Stick but mine did it without messing.
5. Insert your micro SD card into an SD Card adapter and insert into PC
6. Boot into GParted
7. Choose Gparted Live <Enter>
8. Don’t touch keymap <Enter>
9. Languge <Enter>
10. Start Gparted Automatically
11. Change device to your micro sd )it will default to you hard disk - hda– mine is /dev/sdc
12. Delete all existing partitions
For a 64GB card: (resize as needed but /system doesn't need to be bigger than 1GB)
13. Create new, always select primary: do this 3 times.
14. FAT 32 : Size 16GB – this will be /dev/sdc1 in gparted and will be your sdcard for storage in Android
15. EXT4 : Size 42GB – this will be /dev/sdc2 in gparted and will be your /data partition in Android
16. EXT4 : Size 1GB – this will be /dev/sdc3 in gparted and will be your /system partition in Android (not needed for data2sd)
Apply, wait until it finishes and then reboot. Remember to remove the usb stick
*Images stolen from elsewhere as I couldn’t get it to save mine
Now you are ready to install ROM2SD. Note if you want to use DATA2SD then only do 2 partitions 1x FAT32 and 1x larger EXT4
Then reinstall ZOMBi-X but this time choose the ROM2SD / DATA2SD option
HUGE THX
@spudsmac
@miduku
@robbie888
@lightiv
@Bigred007
@Waldo_
@emfanitek
@rlanza1054
@Unidave199
@Lock-N-Load
@Fear Knot
@lvrijn
@mitsublw
@scouzers
@zdebel
@jhr5474
@Eddie Hicks
@smchadwell
@dladz
@eRPeeX
@LocusofZen
Thx everyone that has donated, if you do not see your user name here and have donated, shoot me an PM and I will add you....
Thx Josh
Reserved!
I have been looking forward to this. nice and fresh.
many thanks to you all =)
Does the official TWRP 2.8.0.1 support f2fs on /data?
k-kuchen said:
Does the official TWRP 2.8.0.1 support f2fs on /data?
Click to expand...
Click to collapse
Yes It is working very nicely.. :laugh:
It even has MTP now.... Thx TWRP...
Thx Josh
sneaky buggers
Moar good things are coming
twrp 2.8
Can I just use terminal to install twrp like "dd if=/sdcard/twrp28.blob of=/dev/block/mmcblk0p4" before I install new zombi-x? I renamed file to twrp28.blob already.
xxxericxxx said:
Can I just use terminal to install twrp like "dd if=/sdcard/twrp28.blob of=/dev/block/mmcblk0p4" before I install new zombi-x? I renamed file to twrp28.blob already.
Click to expand...
Click to collapse
I had no idea this would become a TWRP thread... :cyclops:
Take a look here mate TWRP TF300T
Thx Josh
differences between this and the crombi-kk?
how do you get the ES file explorer as pop up?
albyzaf said:
differences between this and the crombi-kk?
how do you get the ES file explorer as pop up?
Click to expand...
Click to collapse
Crombi-KK - Based on CyanogenMod sources
Zombi-X - Based on OmniRom sources and includes some OmniRom specific experimental features that aren't in official nightlies yet (like the floating windows)
If you want floating windows, I suggest activating the "OmniSwitch" app. With this app, if you long press on either the recent apps, or your favourite apps, it will give you the option to "float view"
hardslog said:
Crombi-KK - Based on CyanogenMod sources
Zombi-X - Based on OmniRom sources and includes some OmniRom specific experimental features that aren't in official nightlies yet (like the floating windows)
If you want floating windows, I suggest activating the "OmniSwitch" app. With this app, if you long press on either the recent apps, or your favourite apps, it will give you the option to "float view"
Click to expand...
Click to collapse
It's beem much quieter here than i thought it would be..
I'm just wondering if it would be possible to get some actions on the nav bar for floating window mode. going in through omni switch each time a a bit of a pain. Maybe something like that have done on the katkiss rom?
I'd report more useful stuff like bugs if i had found any =)
I'm just curious if the f2fs and f2fsSD are working in this?
gargash said:
I'm just curious if the f2fs and f2fsSD are working in this?
Click to expand...
Click to collapse
Yep they are. If you mean internal, data2sd and rom2sd.
Nice ROM
Thanks @sbdags, @lj50036, and @hardslog ! You guys still actively working on this? I was wondering if the dock battery status bar indicator would be included in the future.
shawnbrennan55 said:
Thanks @sbdags, @lj50036, and @hardslog ! You guys still actively working on this? I was wondering if the dock battery status bar indicator would be included in the future.
Click to expand...
Click to collapse
Of course we are still working on it. We have just begun. Currently working out other kinks before we try to tackle the dock battery status bar indicator again. Already tried to implement it once but failed miserably.
I can't wait to try this one guys, do you have any idea when it will be out if beta?
robgee789 said:
I can't wait to try this one guys, do you have any idea when it will be out if beta?
Click to expand...
Click to collapse
Don't be afraid of beta. This ROM is awesome combined with an F2FS file system and kernel.
robgee789 said:
I can't wait to try this one guys, do you have any idea when it will be out if beta?
Click to expand...
Click to collapse
Nope, but it is mostly a beta because of unimplemented functionality that we want in the future and some very nit-picky things (we all have some form of OCD :laugh
Could always take a nandroid and give it a try :cyclops:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YOU MUST BE ON THE ASUS STOCK JB 4.2.1 BOOTLOADER VERSION ENDING IN 27.1 or 27.5 AND TWRP 2.7+ OR CWM 6.5.0.0+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
You must do a full wipe in recovery if coming from another ROM. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 15 mins to stabilise! The first boot will take 15 minutes!
SCREENSHOTS
Features and Tweaks
This ROM is based from OMNI AOSP sources
Supports EXT4 and F2FS Data partitions
Based off omni-5.1.1-20150508-zombi_tf300t-KANG source by lj50036/hardslog
Full Aroma Installer for main rom including choice of 4 kernels and ROM2SD/DATA2SD/F2FS support
Remixed _thatv11 kernel with OMNI ramdisk - repacked by sbdags
Grimlock kernel with OMNI ramdisk and _that init - by hardslog
DPI Size: 160 (TF300 recommended small fonts), 240 (Stock fonts), 224 (Medium fonts) & 200 (Small fonts), 180 (Tiny fonts) & 160 (Specsavers fonts)
Launchers: Omni, Google Experience Launcher, Apex , Nova
Boot Animations: ZOMBi-POP, Android-L, Nexus Phase Beam
Gapps (updated by me to Google latest apks and libs)
Misc Apps: ESFile Explorer, Adobe Flash, AdAway, Titanium Backup, Keyboard Manager
Tweaks: File system and performance optimised, Init.d support, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option to enable / disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Option to enable / disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Tip 1: Go to Settings - About Tablet, Click build number 7 times
Now you will see Developer Settings & Performance menus
Bug List
[*]No Floating windows yet
Change Log
20150728 ZOMBi-POP RC1 changes
- RELEASE CANDIDATE 1!
- Fixed the problem with ROM2SD and DATA2SD not working correctly on beta 4
- Added SuperUser and Secure Kernel as options to the installer (Turn these off for work wifi or watching sky go, etc)
- Added dock battery icon as an option to the installer under tweaks
- Fixed partitions not getting unmounted correctly for tuning during installation
- Fixed WiFi across the unified bases for TF700/TF300/TF201
- OmniSwitch now working - thanks hardslog
- Tidied up some installer messages
- Google play services updated to unified version for all devices
- Updated Google Maps to version 9.12.0
- Updated Google TTS to version 3.5.6
- Updated Google Calendar to version 5.2.2-98195638
- Updated YouTube to version 10.28.59
- Updated Apex Launcher to version 3.1.0
20150723 ZOMBi-POP Beta 4 changes
- Unified Aroma installer for TF700/TF300/TF201
- Rebased from omni-5.1.1-20150718-zombi_tf300t-KANG maintained by lj50036, hardslog, sbdags
- Merged source from omni-5.1.1-20150718-zombi_tf700t/tf201t-KANG maintained by lj50036, hardslog
- Updated all kernels and modules to the unified versions - thanks lj50036
- Added inverted kernel for TF201 users
- Aroma re-written to allow multi device selection and detection
- Additional tweaks added from TF701 Zombi-pop
- Amended SuperSU installer script to give correct permissions and install locations
- Reverted to latest Banks Gapps - means another wipe - sorry!
- Updated Google Calendar, Google Mail, Google Hangouts, YouTube, Google Search & Google Maps to latest versions
- Updated ESFile Explorer and Nova Launcher to latest versions
- Added flashable zip to enable dock battery - NOTE - this means you can't change the battery icon
20150119 ZOMBi-POP Beta 3 changes
- Rebased from omni-5.1.1-20150508-zombi_tf300t-KANG maintained by lj50036, hardslog
- Repacked Grimlock kernel for 5.1.1 (Grimlock lite is still using 5.0)
- Retweaked some File System and Virtual Memory parameters - focus on smoothness and battery
- Added Aroma code to remember previous selections as well as offer various installs
- sbdags best auto install, omni default auto install, previous options and previous auto install
- Viper4Android sound enhancer updated to lollipop version + updated the audio_effect.conf file
- Updated Google Play Store to version 5.5.8
- Updated Google Play Services to version 7.3.29
- Updated Google Search to version 4.5.13.19
- Updated Google Maps to version 9.8.1
- Updated Google Hangouts to version 3.2.91698097
- Updated Google Play Music to version 5.9.1854R
- Updated Google Calendar to version 5.2-91668080
- Updated ESFileExplorer to version 3.2.5.1
- Fixed swipe gestures on google keyboard
- Fix for Battery Drain on Google Play Services
- Removed Titanium Backup from the zip file
20150422 ZOMBi-POP 5.1 Beta 2 changes
- Rebased from omni-5.1.1-20150422-zombi_tf300t-KANG maintained by lj50036, hardslog
- New base is from OMNI 5.1.1 merged by lj50036
- Browser History is back again! Thanks lj50036 or Hardslog
- You can now choose to install, no GAPPS or minimal GAPPS (just playstore and syncs)
- Updated Google Maps to version 9.7.1
- Updated Google Search to version 4.4.11.16
- Updated Google Mail to verison 5.1.90765967
- Updated Google Calendar to version 5.2-90091543
- Updated Google Hangouts to version 3.1.89134953
- Updated Google Text-to-Speech to version 3.4.6.1819666
- Updated YouTube to version 10.14.56
- Updated ESFileExplorer to version 3.2.5
- Updated Android Terminal to version 1.0.70
- Updated Banks Gapps:
- Google Play Services 7.3.28 (1863718-438)
- Google Play Store 5.4.12
- fixed OC on Some TF201's running Grimlock-lite
20150330 ZOMBi-POP 5.1 Beta 1 changes
- Rebased from omni-5.1-20150330-zombi_tf300t-KANG maintained by lj50036 & harslog
- Adaptive brigtness fixed and values changed
- Browser speed tweaks incorporated into source
- OmniSwitch updates
- Settings changes to alarms and notification interruptions
- Updated Google Music to version 5.8.1836R
- Removed Titanium Launcher - as it needs to be installed form the store now
- Testing Aroma 3.00 scripts from Amarullz
- Repacked omni / _that kernel with preinit init binary
- Updated YouTube, Hangouts, Google Search, Calendar, Maps to latest 5.1 versions
- Updated Google Play Store and Services to 5.1 versions
- Updated Apex Launcher to version 3.0.3
- Recompiled Browser.apk with speed tweaks
- Moved tibu to system to try and fix install issues
- Shrunk all gapps by removing duplicate lib files from binaries
- Cleaned up gapps inconsistencies (sbdags)
20150218 ZOMBi-POP Beta 4 changes
- Rebased from omni-5.0.2-2015-02-19-zombi_tf300t-KANG source maintained by lj50036
- Show Optimizing app dialog on first boot
- Prevent copyNativeLib of package scanning to reduce booting time
- Keyguard: don't refresh ui when screen off which causes high power when screen off
- Prevent App Not Responding when broadcast receiver is killed
- lowmemorykiller: Fix high min-free values
- Removed my minfree init.d script to test new default values
- Changed the interactive governor tweaks to help battery life and heat
- min_sample_time from 40000 to 10000
- go_maxspeed_load from 90 to 98
- max_normal_freq from 1500000 to 1300000
- midrange_freq from 760000 to 1150000
- Updated SuperSU to version 2.46
- Updated Apex Launcher to 3.0.2
- Updated Google Maps to version 9.4.0
- Updated YouTube to version 10.05.6
20150212 ZOMBi-POP Beta 3 changes
- Rebased from omni-5.0.2-2015-02-11-zombi_tf300t-KANG source maintained by lj50036
- Updated Grimlock Kernels for exfat and ntfs support (hopefully!)
- New Kernel - Grimlock LITE - OC reduced to 1700mhz and voltage reduced for better battery/heat
- Rebuilt _that/omni kernel with oom patches and repacked ramdisk
- Reverted some vm and kernel tweaks which seems to have got performance back on track
- Reverted read_ahead_kb to 4096 as no benefit to 2048
- Fixed Tibu not installing correctly and updated to version 7.0.0.2
- Removed Chrome and Dolphin / Flash
- Rebuilt all GAPPS from latest PA GAPPS modular package Feb 2015
- Resized Nexus-Lollipop bootanimation
- Added the Unknown Pleasures bootanimation
- Aroma theme updated - thanks Shonkin for the bg picture
- Fixed Overclocking not working on data2sd with _that's kernel. You now get 4x1800 cores on data2sd
- CPU will use all 4 cores at 90% max load instead of 85% on basic cpu tweaks
- Fixed missing sdcardi on grimlock kernel
- Fixed init.d on Grimlock 5 kernel by repacking init.zombi.rc
- Fixed zipalign script so it runs properly once after a dirty or clean install
- Set the lowmemorykiller to less aggressive 2048,4096,8192,16384,24576,32768 via init.d script
- Rewrote Aroma installer which gets us a step closer to it remembering previous installs (but not yet!)
- Split out the extra tweaks into two parts for further debugging - Basic and Extended
- Spilt out Disable Software Rendering and Force GPU rendering for further testing
- Reordered init.d scripts to make more sense
- Updated Titanium Backup to version 7.0.0 and cleaned up installation script
- Force GPU Rendering is not getting applied correctly - do it manually for now
20150127 ZOMBi-POP Beta 2 changes
- Rebased from omni-5.0.2-20150127-zombi_tf300t-KANG source maintained by lj50036/hardslog
- Fixed Auto-rotation - thanks hardslog/lj50036!
- NEW Material AOSP Broswer - very nice!
- Omni Switch but no windows mode yet
- Fixed missing sdcardi folder for data2sd and rom2sd users
- Fixed the Apex and Nova Launchers getting missed up on install
- CLEANTweaks init.d re-balanced to be less aggressive - hopefully stops so many reboots
- Recompiled latest framework-res.apk with zombi-pop default_wallpaper.jpg
- Updated Google Chrome to version 40.0.2214.89
- Updated Google Maps to version 9.3.0
- Updated YouTube to version 10.02.3
- Updated Android Terminal Emulator to version 1.0.64
20150121 ZOMBi-POP Beta 1 changes
- Fixed Auto-rotation
- Added Linaro build of Grimlock Kernel (needs more testing)
- AOSP Browser: Materialize (green)
- First Release for TF300/TF201
20150119 ZOMBi-POP Pre-Release 3 changes
- New name - new logo! ZOMBi-POP
- Rethemed Aroma to new ZOMBi-POP theme
- Added 2 optional beta tweaks for testing (screen and kernel)
- Fixed _thatv11 kernel option
- Added Grimlock v5.0 (not tested)
20150118 Lollipop Pre-Release 2 changes
- Updated to latest OMNI Lollipop source omni-5.0.2-20150117-zombi_tf700t-KANG maintained by lj50036
- Fixed issue with AOSP Browser getting installed when not selected
- Fixed issue with Live Wallpapers getting installed when not selected
- Fixed issue with Launcher3 getting installed when not selected
- Fixed issue with Terminal not getting installed when selected
- Fixed issue with DSPManager still getting installed when Viper4fx is installed
- Removed stock calendar as google app one is far superior
- Fixed init.d scripts not running due to wrong permissions and wrong ramdisk init.rc call
20150117 Lollipop Pre-Release 1 changes
- Updated system and data apps to use new lollipop structures
- Updated all apps to latest versions
- Removed xposed as not compaitble with lollipop
- Tweaked the force gpu options
20150111 Lollipop Alpha 1 changes
- Updated to latest OMNI Lollipop source maintained by lj50036
- New PA GApps Lollipop version 2015
- Initial Beta test build to see what works and what doesn't
Click to expand...
Click to collapse
The Team
@sbdags - Creative Mastermind (From CROMi-X/CROMBi-kk/ZOMBi-X ROMS)
@lj50036 - Source Guy (From CROMBi-kk/ZOMBI-X ROMS)
@hardslog - The Canadian (From Grimlock ROMS)
@ikkeT- The Fin
Credits
Google
Omni Team - Thanks!
@_that For all the great advice, watching over us and fixing everything we break!!!!!
All the beta testers for your patience and feedback : fatboyinlycra, berndblb, drewski_1, duckredbeard, keshavmot2, corb06, jmaybush, JoJoDaClown, kansasboy001, TrofeoSC
To Do
Fix loads of stuff!
XDA:DevDB Information
ZOMBi-POP, ROM for the Asus Transformer TF300T
Contributors
hardslog, lj50036, sbdags, _that
Source Code: https://github.com/zombi-x
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
ROM Firmware Required: JB Ending with 27.1 or 27.5 bootloader
Based On: OMNI AOSP
Version Information
Status: Stable
Current Stable Version: 20150728 RC1
Stable Release Date: 2015-07-28
Current Beta Version: 20150723 Beta 4
Beta Release Date: 2015-07-23
Created 2015-01-24
Last Updated 2015-07-27
Reserved
UPGRADE INSTRUCTIONS
Steps
1. If you haven’t yet, unlock your TF300 by following these instructions.
2. Install the latest version of Team Win Recovery Project (TWRP) 2.7+ Note this ROM will NOT install with older versions of recovery!
TWRP OFFICIAL DOWNLOADS
Download the recovery file from above, put it into the same folder where you have adb and fastboot files. Please rename it to twrp.blob or cwm.img and follow the instructions below:
CWM:
Connect your transformer to your PC, reboot to the bootloader to enable fastboot by either holding down [power] and [volume down] or opening a command prompt in your adb.exe folder in windows:
Code:
adb reboot bootloader
To flash the recovery:
Code:
fastboot -i 0x0B05 flash recovery cwm.img
or
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
A blue bar will go accross the screen on the tab and the command prompt will indicate it was successful in about 10 seconds
Then reboot the tablet either back to the bootloader or to android to complete
Code:
fastboot -i 0x0B05 reboot-bootloader
fastboot -i 0x0B05 reboot
You can now access the recovery by pushing [volume up] on the RCK icon in the bootloader screen
Click to expand...
Click to collapse
FLASHING THE ROM FROM RECOVERY
Steps
1. Download the ROM below and save to your internal or external SD Card. Do not unzip the file.
ZOMBi-POP ROM DOWNLOAD
Note: The first boot after install will take 15 mins whilst everything is built. Some people might think it is looping but it is not. The ROM also takes about 15 mins to stabilise after the first boot
ZOMBi-POP RC1 LP 5.1.1 Full Mirror 1
ZOMBi-POP RC1 LP 5.1.1 Full Mirror 2
MD5 sum: e3980e1bffa539e676ac1269268abcd1
Flash this patch please as there is a file missing that gives better performance
RC1 Performance Patch
Remember if you are on rom2sd you beed to flash rom2sd1.zip first and if on data2sd use data2sd1.zip first.
FILES ARE SIGNED. IF YOU ENABLE SIGNATURE VERIFICATION IN RECOVERY IT WILL VALIDATE THE FILE BEFORE FLASHING.
ROM2SD/DATA2SD USERS PLEASE READ!
ROM2SD only works if you have ZOMBI-POP, ZOMBi-X, CROMBi-kk, CROMi-X or miniC flashed on internal with a THATv10+ kernel. Just choose ROM2SD in the installer of ZOMBi-POP to flash it to ROM2SD and the installer will do the rest.
- Install ZOMBi-POP and choose ROM2SD or DATA2SD install
The ROM2SD1.zip below is only needed if you need to switch your recovery to between normal and rom2sd mode. For Example you want to backup or restore a rom2sd installation. Flash once to go rom2sd and flash again to go back to normal. A reboot always puts you back to normal. Thanks to _that!
ROM2SD1.zip Download Mirror 1
ROM2SD1.zip Download Mirror 2
MD5 Sum: 7b699136d59ea3d5538570ccaf422acf
The DATA2SD1.zip below is only needed if you need to switch your recovery to between normal and data2sd mode. For Example you want to backup or restore a data2sd installation. Flash once to go data2sd and flash again to go back to normal. A reboot always puts you back to normal.
DATA2SD1.zip Download Mirror 1
DATA2SD1.zip Download Mirror 2
MD5 Sum: 9d5e9e2fd32593f981624499b37924b2
2. Boot to recovery – Either choose Boot to Recovery from the Power Menu if available on your current ROM or from the tablet power off hold the [volume down] button and press the [power] button. Once your see the flashing RCK icon, press [volume up] to select. If another icon is flashing use [volume down] to move between icons.
3. Using your recovery make a Nandroid Backup of your current setup
4. Select install and navigate to where you saved your ROM zip file.
5. Choose the ZOMBi-POP zip file and follow the on screen prompts to customize your installation.
6. Reboot and enjoy.
Using GParted to setup a micro SD for ROM2SD or DATA2SD!
First and foremost - DO NOT USE MINI TOOL!
Formatting a micro sd card for ROM2SD
Note for DATA2SD just do one partition in stead of 2
We will be using a GParted Live boot USB and a FAST good quality micro sd like a Sandisk or Samsung Class 10 - SDHC/SDXC UHS-1 card with read speed of at least 20MB/S. If you have a cheap chinese eBay card don't bother - they are not good enough.
You will also need a USB Stick with at least 1GB size. Note this process formats the USB disk so don't keep any important files on it. It will also wipe your micro sd so make sure you are prepared.
1. Go to the link below and download the GParted Live CD/USB/HD/PXE Bootable Image and save it somewhere you remember
http://gparted.sourceforge.net/download.php
2. Download Linux Live USB Creator and install it
http://www.linuxliveusb.com/
3. Fire up LiLi USB Creator:
a. Choose your USB key - I,e, the drive letter for your USB (not sd card)
b. Choose your GParted iso image for the source
c. Choose the check box to Format Key in FAT32 and hide files
d. Click the lightning bolt to create
4. Now you have a bootable disk you need to boot from it. You may need to alter you BIOS Settings on your PC to boot from a USB Stick but mine did it without messing.
5. Insert your micro SD card into an SD Card adapter and insert into PC
6. Boot into GParted
7. Choose Gparted Live <Enter>
8. Don’t touch keymap <Enter>
9. Languge <Enter>
10. Start Gparted Automatically
11. Change device to your micro sd )it will default to you hard disk - hda– mine is /dev/sdc
12. Delete all existing partitions
For a 64GB card: (resize as needed but /system doesn't need to be bigger than 1GB)
13. Create new, always select primary: do this 3 times.
14. FAT 32 : Size 16GB – this will be /dev/sdc1 in gparted and will be your sdcard for storage in Android
15. EXT4 : Size 42GB – this will be /dev/sdc2 in gparted and will be your /data partition in Android
16. EXT4 : Size 1GB – this will be /dev/sdc3 in gparted and will be your /system partition in Android (not needed for data2sd)
Apply, wait until it finishes and then reboot. Remember to remove the usb stick
*Images stolen from elsewhere as I couldn’t get it to save mine
Now you are ready to install ROM2SD. Note if you want to use DATA2SD then only do 2 partitions 1x FAT32 and 1x larger EXT4
Then reinstall ZOMBi-POP but this time choose the ROM2SD / DATA2SD option
Reserved
All,
The ROM is still in BETA and by flashing it you are helping the BETA Testing process
It may still have some bugs, spontaneously reboot, drain the battery faster or heat up a bit. The aim is to make it better and fix them.
If you find a bug and want to report it here please post a logcat (after it occurred) with a description of what you were doing at the time and the rough timing in the logcat to look at (these things get huge!).
You can also post a dmesg which is the kernel boot logs and can indicate issues with data corruption or hardware.
If you get a reboot then please post a last_kmsg from the /proc folder.
How to get a logcat
How to get useful logs
Thank you!!
Join us on IRC for a chat or if you have questions:
Freenode
zombi-x
There is no Q&A section for this rom as it is still in dev so you are ok to post your questions here!
One for me
MIRROR 1 & 2 are up for your flashing needs ..... :good:
Thx Josh & Team ZOMBI
Cannae reserve a post but this one will do
@lj50036
I know all the kinks haven't been worked out yet, but is dock battery icon in this version?
toolhas4degrees said:
@lj50036
I know all the kinks haven't been worked out yet, but is dock battery icon in this version?
Click to expand...
Click to collapse
No not yet, most of the dock keys are working, but no battery support as of yet....
Thx Josh
Could it be possible to enjoy this project with the transformer prime???
Thx un any case, great effort, great success team!
jacmat said:
Could it be possible to enjoy this project with the transformer prime???
Thx un any case, great effort, great success team!
Click to expand...
Click to collapse
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Thx Josh
lj50036 said:
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Click to expand...
Click to collapse
so good to hear that, thanks so much for your work Josh!
Good to know! It would be great if it could work on the ME301T also! Is the hardware that different?
Hi, this rom work on TF300TG ???
Thanks
lj50036 said:
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Thx Josh
Click to expand...
Click to collapse
Thanks! Flashed with grimlock 5.0 and it runs well, but I had issues with chrome browser lockups...
lj50036 said:
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Thx Josh
Click to expand...
Click to collapse
Thank you very much, Josh, you and your team bring to prime's owners a reason to smile
jlamaeli said:
so good to hear that, thanks so much for your work Josh!
Click to expand...
Click to collapse
You will see a thread when its ready... :good:
EV0LU710N said:
Good to know! It would be great if it could work on the ME301T also! Is the hardware that different?
Click to expand...
Click to collapse
There maybe a compatible pack but we will have to wait and see... :good:
medievalspawn said:
Hi, this rom work on TF300TG ???
Thanks
Click to expand...
Click to collapse
It should but you will lose 3G....
luismiguel1977 said:
Thanks! Flashed with grimlock 5.0 and it runs well, but I had issues with chrome browser lockups...
Click to expand...
Click to collapse
Logcat after the browser crashes .....
jacmat said:
Thank you very much, Josh, you and your team bring to prime's owners a reason to smile
Click to expand...
Click to collapse
Will have to wait and see.... :good:
Thx Josh
lj50036 said:
There maybe a compatible pack but we will have to wait and see... :good:
Click to expand...
Click to collapse
That would be fantastic, surely would make a bunch of people very happy, myself included!
By the way, if you need a beta tester or some help with the development, I would be very happy to help out! I have a tablet ready to test drive!
lj50036 said:
There maybe a compatible pack but we will have to wait and see... :good:
Click to expand...
Click to collapse
Thank you man, would be great! :good:
excellent, downloading now, can you recomend a good gapps package for the rom
thanks
matt_simpson said:
excellent, downloading now, can you recomend a good gapps package for the rom
thanks
Click to expand...
Click to collapse
It's built in as choices.