Dear friends,
I have a problem with my NOTE 2.
I'm unable to write PIT table,
and for this reason I cannot write any ROM on the phone because the PIT table doesn't exists.
I tried multiple cables and multiple pc,
but still have no success.
Odin stuck
Anyone got this fixed?
rgds,
thomas
anyone can help me?
download the pit file in here .. http://d-h.st/Dlv , Re-Partition in odin..
free image hosting
stuck here
tried multiple usb cables and multiple pc
tbudicin said:
free image hosting
stuck here
tried multiple usb cables and multiple pc
Click to expand...
Click to collapse
the pic too small ,I can't see what in it....
deadman12, the screenshot shows the following:
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
Options checked:
- Auto Reboot
- Re-Partition
- F. Reset Time
PIT file has been selected in the PIT field.
(Just posting this to try to help out the OP, not trying to hijack the thread or anything)
To the OP, I have noticed that in your screenshot you have not selected a ROM in the PDA field to flash to the phone along with the PIT file. Have you tried doing this?
I had this issue where data failed to mount. Used odin to repartition with the pit file. I select the stock rom tar 4.1.1 on the pda tab. Works after that.
Sent from my GT-N7100 using xda premium
hayabusa08 said:
I had this issue where data failed to mount. Used odin to repartition with the pit file. I select the stock rom tar 4.1.1 on the pda tab. Works after that.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Hi your device is n7105 or n7100?
7100. Make sure u flash the correct model pit file.
Sent from my GT-N7100 using xda premium
Thanks guys to post replies in my thread.
@kcnskenn: thank you for posting image info!
My device is 7100.
I tried also to use pit together with PDA but no works either.
I think the problem is not so simple, because when i enter in download mode I don't see model.
maybe bootloader is corrupted.
I found a guide to copy boot from sd to phone opening the phone and bypass a resistor, but the note2 hardware design is different and i cannot find the same resistor. anyone tried this?
thomas
Sorry cant be of more help bro.
Sent from my GT-N7100 using xda premium
tbudicin said:
Thanks guys to post replies in my thread.
@kcnskenn: thank you for posting image info!
My device is 7100.
I tried also to use pit together with PDA but no works either.
I think the problem is not so simple, because when i enter in download mode I don't see model.
maybe bootloader is corrupted.
I found a guide to copy boot from sd to phone opening the phone and bypass a resistor, but the note2 hardware design is different and i cannot find the same resistor. anyone tried this?
thomas
Click to expand...
Click to collapse
your device is infected with SDS syndrome , ( EMMC ic needs to be replaced )
Hello,
I've just acquired a GT-5120 and am trying to install the 4.2.2 update using Odin.
I downloaded the update zip for my device (1.4GB), unzipped it to see a .tar.md5 file. Opened up Odin, checked PDA, selected the .tar.md5 file. Pressed start and got a failed message.
Here's the log
Code:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I thought there was an issue with my connection / Odin, but I was able to successfully flash a custom recovery and root the device.
Any pointers to get the flashing working?
Thanks!
Somethings to check
1) What is the version of the ODIN you used? I suggest Odin3 3.07.
2) When you try to flash, did the ODIN complete md5 check of the file you added to PDA? (Because it's note in the log you provided or it's different).
3) From where did you download the .tar.md5? "www.Sammobile.com/firmwares" is the best.
4) Did you rename the .tar.md5 file, probably a silly question, but sometimes funny things happen.
AkiOrpheus said:
1) What is the version of the ODIN you used? I suggest Odin3 3.07.
2) When you try to flash, did the ODIN complete md5 check of the file you added to PDA? (Because it's note in the log you provided or it's different).
3) From where did you download the .tar.md5? "www.Sammobile.com/firmwares" is the best.
4) Did you rename the .tar.md5 file, probably a silly question, but sometimes funny things happen.
Click to expand...
Click to collapse
Thanks for the reply, Aki!
I'm using Odin 3.07
The log may have not reflected it since I've tried removing the .md5 extension and flashing with just the tar (same extension as the recovery that successfully flashed). After selecting the file, it takes a few minutes before I'm able to do anything (md5 check?).
I downloaded the file from a thread in this forum with a bunch of mirrors. I'll check out sammobile and report back after testing the file downloaded from there.
I tried leaving the .tar.md5 and renaming it to just .tar (since I successfully flashed a .tar file).
Thanks for the help!
AGH Disregard
I was trying to flash an 5120 ROM on my I467M :crying:
danada said:
Thanks for the reply, Aki!
I'm using Odin 3.07
The log may have not reflected it since I've tried removing the .md5 extension and flashing with just the tar (same extension as the recovery that successfully flashed). After selecting the file, it takes a few minutes before I'm able to do anything (md5 check?).
I downloaded the file from a thread in this forum with a bunch of mirrors. I'll check out sammobile and report back after testing the file downloaded from there.
I tried leaving the .tar.md5 and renaming it to just .tar (since I successfully flashed a .tar file).
Thanks for the help!
AGH Disregard
I was trying to flash an 5120 ROM on my I467M :crying:
Click to expand...
Click to collapse
I think u should be glad that u didn't sucsess
coz I think success will be a bricked phone
I need T889V pit file. There re some problem in my phone, so I need someone help me.
If anyone have the address of the pit file, please tell me.
If anyone have T889V, can you use dd command to copy the pit from the phone? I also need param file. Big thanks.
Hi , i need a big favor , i need the note 3 pit file because i have a corrupted efs and i need it for re partitions my phone , someone can send me or post the pit file
There is an explanation , how to do it via adb or terminal http://forum.xda-developers.com/showthread.php?t=2737448
Thanks
HELP is there anyone can help me find pit file for samsung galaxy tab 3 (sm-t116nu)