I tried to install the modded Samsung stock keyboard. Unfortunately, either it does not work on on my Sprint Note 2 or I installed it incorrectly.
Since it's my preferred keyboard, I would really appreciate if someone could please post the stock samsung keyboard. Many thanks.
Think I got the correct apk
Question about this...
...not just in theory, but in practice, would anybody be able to use the apk from one of the myriad of ROMs out there? Simply download a ROM's zip for your version (4.1.1 vs 4.1.2), extract the files from the zip, then find the apk(s) needed... yes? Any concerns or "be careful" things to know about this if it is just as easy as it seems to be to do?
TIA.
lennykravitz2004 said:
Question about this...
...not just in theory, but in practice, would anybody be able to use the apk from one of the myriad of ROMs out there? Simply download a ROM's zip for your version (4.1.1 vs 4.1.2), extract the files from the zip, then find the apk(s) needed... yes? Any concerns or "be careful" things to know about this if it is just as easy as it seems to be to do?
TIA.
Click to expand...
Click to collapse
Which apk are you trying to use? It should work. Just make sure to backup in recovery first just in case.
OP did you try the autocorrect keyboard apk? If so then it didnt work for me either.
Sent from my SPH-L900 using Tapatalk 2
mexiking713 said:
Which apk are you trying to use? It should work. Just make sure to backup in recovery first just in case.
OP did you try the autocorrect keyboard apk? If so then it didnt work for me either.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Wasn't being specific to a certain apk, but that sounds like a "be careful". And yes, I have way too many backups with all of the flashing I've been doing over the last couple of weeks. :laugh: Was asking more along the lines of "in general".
Thanks a gazillion!!!
w7excursion said:
think i got the correct apk
Click to expand...
Click to collapse
Many apologies but it didn't work. Same force closing problem as the modded keyboard. I'm on stock deodexed lk8.
Does anyone have the lk8 deodexed rom version or know how I can get it from the deodexed rom?
Many thanks.
w7excursion said:
Think I got the correct apk
Click to expand...
Click to collapse
In case anyone else needs it, I was able to install (on my rooted stock deodexed 4.1.2) the following stock Samsung keyboard successfully:
http://forum.xda-developers.com/showthread.php?p=36821234#post36821234
Thanks again all!
Related
Hi,
I recently flashed my device from the Asian firmware to European firmware. After flashing, i realized that the DioPen Chinese IME is not available as it was available in my device when I first bought it. Is there anyway that I can re-install the input again into the device.
I had try using many 3rd party application in the market, but none of them satisfied me yet. If there is the way to re-install the DioPen Chinese IME, I would be happy..
Any help will be appreciated.
Thanks.
Im not sure if this will work for you but here, I've extracted DioPenChineseIME.apk from a DXKPB stock firmware. I think you can install it just like a regular app.
Hope it helps.
virtualstefan13 said:
Im not sure if this will work for you but here, I've extracted DioPenChineseIME.apk from a DXKPB stock firmware. I think you can install it just like a regular app.
Hope it helps.
Click to expand...
Click to collapse
I am able to install it, but i believe that is some missing file due to the keyboard is not popping up after enabling. Instead it crashed, and enter the "force closed" mode..
Maybe you can't install it like a regular app. By which I have no idea myself how to. The app in the market works well too though, tried before since I used em before
Sent from my Galaxy Ace running J.A.F CM 7.2 Odexed using XDA App
MrChaosDesire said:
Maybe you can't install it like a regular app. By which I have no idea myself how to. The app in the market works well too though, tried before since I used em before
Sent from my Galaxy Ace running J.A.F CM 7.2 Odexed using XDA App
Click to expand...
Click to collapse
I dont really like the market app as i feel the DioPen Chinese IME works the best.. I seen simillar post in Samsung Galaxy S. Just fear that it does not support thats all
jeff425 said:
I am able to install it, but i believe that is some missing file due to the keyboard is not popping up after enabling. Instead it crashed, and enter the "force closed" mode..
Click to expand...
Click to collapse
i think you should consider going back to an asian firmware. it might be that fonts or system files are needed and i dont know what file that is. let me know if you jave an idea and ill try to xtract it from my stock dxkpb rom
virtualstefan13 said:
i think you should consider going back to an asian firmware. it might be that fonts or system files are needed and i dont know what file that is. let me know if you jave an idea and ill try to xtract it from my stock dxkpb rom
Click to expand...
Click to collapse
Thank you for your help
Sent from the MARVELOUS SAMSUNG GALAXY ACE %s
Is it not to be copied in system through ROot explorer?
http://www.darkyrom.com/community/index.php?threads/diopen-chinese-ime.846/
go here and see
virtualstefan13 said:
Im not sure if this will work for you but here, I've extracted DioPenChineseIME.apk from a DXKPB stock firmware. I think you can install it just like a regular app.
Hope it helps.
Click to expand...
Click to collapse
you need some .so files in order to work properly. and also this one is the older version.
You need the better one, the newest version in which has a full screen handwriting mode.
http://perangkorea.blogspot.com/2013/03/diopen-chinese-ime.html
hope it help for those looking for the better one.
http://forum.xda-developers.com/showthread.php?t=2234646
Hello,
i have installed Optimized Kezra V3 ROM and tryed to connect my phone via Kies. It failed every time. Is it possible to connect the phone with this ROM via Kies?
jorks3z
jorks3z said:
Hello,
i have installed Optimized Kezra V3 ROM and tryed to connect my phone via Kies. It failed every time. Is it possible to connect the phone with this ROM via Kies?
jorks3z
Click to expand...
Click to collapse
ask this in the thread of the rom itself. is more likely to have a answer there
I can not ask there, because i need at least 10 posts to write something in a development forum.
thanks for reply
That's already 2 ;-)
Sent from my GT-I8150 using xda premium
Well if you won't go to the dev, the dev goes to you. I have removed Kies and all Kies related stuff because it was bogging down on the memory.
Sorry =\
hey Kezra, another user, that can't post in DEV forum
is there some way you could give us Swype apk? you removed this keyboard in newest ROM, which is bad for me since I have to use Swype beta and it's not as accurate as normal swype.
You can find all those apps you are asking for here:
http://forum.xda-developers.com/showthread.php?t=1465668
I completely forgot about this thread. Thanks a lot mate
Hi, I'm on stock DXKJ5 and want to try this custom ROM out. I know that it's based on EUR ROM. Can I flash the custom ROM right away or should I first flash the stock EUR ROM?
Hi, just another note on this Rom:
I had trouble with my titanium backup, as it tried to restore swipe settings ave as mentioned before swipe is not included. Our ifs not a bug, but be aware that this might cause trouble.
Gesendet von meinem GT-I8150 mit Tapatalk
Swype, TW calculator and TW calendar
Hi, I downloaded the .apks of the swype, twcalculator and twcalendar. Of course it wouldn't just install like other normal apps, so I tried to move it directly into the system/app folder.
I just won't move (or copy)! Says that some error ocurred and that it's impossible to move.
The phone has Kezra V3 rom and V6 super charger. It's rooted alright.
I miss swype... and MOST OF ALL, I miss XT9! It seems it just went away with this Version 3. Downloaded Go Keyboard but didn't really liked. The stock gingerbread keyboard with swype and full functioning XT9 is far better.
I'm considering "dowgrading" it to V2 again, I found a working download link somewhere in the V3 thread for it.
Can anyone help?
Thanks in advance
getridofit666 said:
Hi, I downloaded the .apks of the swype, twcalculator and twcalendar. Of course it wouldn't just install like other normal apps, so I tried to move it directly into the system/app folder.
I just won't move (or copy)! Says that some error ocurred and that it's impossible to move.
The phone has Kezra V3 rom and V6 super charger. It's rooted alright.
I miss swype... and MOST OF ALL, I miss XT9! It seems it just went away with this Version 3. Downloaded Go Keyboard but didn't really liked. The stock gingerbread keyboard with swype and full functioning XT9 is far better.
I'm considering "dowgrading" it to V2 again, I found a working download link somewhere in the V3 thread for it.
Can anyone help?
Thanks in advance
Click to expand...
Click to collapse
unzip the rom, place all the apps that you want in "system", "app", rezip the rom and flash it again without wipping data in cwm, that should solve your problem
nemesis.sisemen said:
unzip the rom, place all the apps that you want in "system", "app", rezip the rom and flash it again without wipping data in cwm, that should solve your problem
Click to expand...
Click to collapse
Thanks a lot mate. I'm going to give it a try.
I tried to do this after the rom was flashed, with scrip manager. Just copy the app directly into the /system/app folder, however it didn't work.
I'll post my experiences back.
By the way, do you have any insight on the XT9 issue? It was a must have for touchscreen keyboards... I could live without swype, but XT9 was suppose to work with samsung keyboard... I'm confused with that.
getridofit666 said:
Hi, I downloaded the .apks of the swype, twcalculator and twcalendar. Of course it wouldn't just install like other normal apps, so I tried to move it directly into the system/app folder.
I just won't move (or copy)! Says that some error ocurred and that it's impossible to move.
The phone has Kezra V3 rom and V6 super charger. It's rooted alright.
I miss swype... and MOST OF ALL, I miss XT9! It seems it just went away with this Version 3. Downloaded Go Keyboard but didn't really liked. The stock gingerbread keyboard with swype and full functioning XT9 is far better.
I'm considering "dowgrading" it to V2 again, I found a working download link somewhere in the V3 thread for it.
Can anyone help?
Thanks in advance
Click to expand...
Click to collapse
You might want to try the ICS Keyboard... It's much better. IMHO.
mpbtejada said:
You might want to try the ICS Keyboard... It's much better. IMHO.
Click to expand...
Click to collapse
Dude, thanks a lot! I tried this ICS keyboard and liked it. It's not as intelligent as the stock gingerbread keyboard used to be but it goes quite close.
I tested the SlideIT app and LOVED IT. Replaced everything else, and now KP V3 works fine for me
I can't thank xda dev enought!
I take no credit for this modification, it is not an original idea nor does it contain original code. It's an adaptation of the modification for the GT-I9300 by wanam which can be found here. I simply made a few slight modifications to accomodate the SGH-I747.
That being said, I have not tested this on anything other than a SGH-I747, running a stock, deodexed UCALG1 or UCALH1.
"CWM" HOWTO
Download the appropriate package for your firmware (eg. UCLAG1, UCALH1)
Boot into recovery.
Make a nandroid backup.
Flash package.
Note: Recordings are saved to /sdcard/Sounds.
Also included are *-Rollback.zip files. These will "revert" or "rollback" this modification, returning you back to the STOCK Dialer (without recording). Be sure to flash the appropriate one for your firmware!
Question, where does it store the recording?
White Hot! GS3.
---------- Post added at 06:11 PM ---------- Previous post was at 05:54 PM ----------
Never mind found it!
White Hot! GS3.
What's the rollback zip for? Is that a revert file in case we want to go back to the original phone?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
baghera1979 said:
What's the rollback zip for? Is that a revert file in case we want to go back to the original phone?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yep, exactly.
Works as stated ! Great Mod for documenting my crazy exwifes calls
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
magn2o said:
Yep, exactly.
Click to expand...
Click to collapse
Thanks. Was wondering what rollback was. I'm used to seeing a file say revert.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
will this remove the no increasing ringtone mod or does this already incorporate that as well. Looking at the original thread by wanam there were 2 different versions available for download. Just curious. pretty sure I can figure out how to incorporate the no increasing ringtone.
Thanks.
hansonmi said:
will this remove the no increasing ringtone mod or does this already incorporate that as well. Looking at the original thread by wanam there were 2 different versions available for download. Just curious. pretty sure I can figure out how to incorporate the no increasing ringtone.
Thanks.
Click to expand...
Click to collapse
No, this does not include the "no increasing ringtone" patch. However, I could include that if you like.
Sent from my Samsung Galaxy S III
magn2o said:
No, this does not include the "no increasing ringtone" patch. However, I could include that if you like.
Sent from my Samsung Galaxy S III
Click to expand...
Click to collapse
Sure. If you don't mind. Otherwise, when i get my dev box set back up, I am pretty sure I can figure it out.
Currently working on a UCALG1 stock firmware build that has all the potential of the phone unlocked (deodexed, zipaligned, BT and WiFi tether enabled, etc.) since i have only been able to find that for the previous firmware (UCALEM). Just makes it easier instead of having to flash to stock UCALG1 and then run a bunch of updates to get back. This way flash back to rooted stock with all the bells and whistles through odin without tripping the counter. :fingers-crossed:
Once I feel like taking the risk of bricking my phone, was going to work on doing the same to UCALH1 and test it out.
i flashed the UCALG1-DEODEX-EnableCallRecording.zip through CWM stock rom but with no flash counter rooted phone yet i do not see the recording feature. is there something i'm missing? any word of advice folks?
i was able to flash the tether app and debloated app through CWM without any issue; so i'm not sure what i'm missing here. thanks in advance
cruzad3r said:
i flashed the UCALG1-DEODEX-EnableCallRecording.zip through CWM stock rom but with no flash counter rooted phone yet i do not see the recording feature. is there something i'm missing? any word of advice folks?
i was able to flash the tether app and debloated app through CWM without any issue; so i'm not sure what i'm missing here. thanks in advance
Click to expand...
Click to collapse
Is your current ROM deodexed?
Sent from my Samsung Galaxy S III
if i understand correctly, deodexed is a custom rom? if so then no i'm still on stock ATT rom just rooted.
cruzad3r said:
if i understand correctly, deodexed is a custom rom? if so then no i'm still on stock ATT rom just rooted.
Click to expand...
Click to collapse
You CAN deodex a stock ROM, but gig would have to either flash a deodexed stock ROM or deodex your apks yourself. In order to apply custom modifications or themes, you'll need a deodexed ROM.
I, personally, run a stock ROM.. stock TouchWiz, etc, justed rooted and deodexed.
Sent from my Samsung Galaxy S III
I am not deodexed. To run I simply renamed the phone apk and phone odex files in system/app folder to .old then moved the phone apk from the zip to the system/app folder using es file explorer. Rebooted .... record calls!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Be careful what state you are in when you use this. Lots of us states require two party notification to record calls (caller and called party)
Sent from my SAMSUNG-SGH-I747 using xda premium
Call Recording + No Increasing Ring
Attached is a CWM update that incorporates not only the Call Recording found in this thread, but also the mod to not have the increasing ringer which was by yoelsd. Thanks goes to both the OP and yoelsd and too many others that gave guides for decompiling and editing APKs... I also used the CWM zip that yoelsd gave with his update, as the update-script will remove the .odex file since the SecPhone_ATT.apk file is deodexed.
I just tested this out on my stock "Odexed" rooted SGS-III using the UCALG1 Firmware and it works like a charm. Best of both worlds. Maybe the OP can put a link in the first post to this. :fingers-crossed:
CHEERS!
what is this Odexed and De-Odexed business? What's the benefit and why are we doing it?
hansonmi said:
Attached is a CWM update that incorporates not only the Call Recording found in this thread, but also the mod to not have the increasing ringer which was by yoelsd. Thanks goes to both the OP and yoelsd and too many others that gave guides for decompiling and editing APKs... I also used the CWM zip that yoelsd gave with his update, as the update-script will remove the .odex file since the SecPhone_ATT.apk file is deodexed.
I just tested this out on my stock "Odexed" rooted SGS-III using the UCALG1 Firmware and it works like a charm. Best of both worlds. Maybe the OP can put a link in the first post to this. :fingers-crossed:
CHEERS!
Click to expand...
Click to collapse
Will this work with deodexed stock?
:EDIT: Yes is does!!
cruzad3r said:
what is this Odexed and De-Odexed business? What's the benefit and why are we doing it?
Click to expand...
Click to collapse
Odex means there are .odex files present for an application. Example: SecPhone_ATT.apk also has an odex file named SecPhone_ATT.odex. A deodexed application basically has the .odex file complied differently into a .dex file which resides in the .apk. the purpose of odex was for speed but you lose a bit of storage and you cannot usually mod them as easy since part of the program is in 2 places. Deodexed apps tend to use a bit more memory and are not totally optimized for speed (zipalign helps with memory and speed and for the most part differences are negligible) but are the only way you can really make any changes to roms or programs.
There are plenty of resources out there that explain "odex vs deodex" on the interweb via search engine and on this site if searched.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ahfu25 said:
Will this work with deodexed stock?
:EDIT: Yes is does!!
Click to expand...
Click to collapse
Yup... the update that I posted is good for odexed and deodex roms since I borrowed the update-script that will delete the .odex file when you install it.
See my original post for who all I thanked for their stuff that I used. The only thing I did is take the OPs SecPhone_ATT.apk file for UCALG1 and modify it to include the no increasing ringer... there were guidss int he forums here that showed how to do it. It was easier to do that way, then to try to figure out how to enable call recording and mofiying the other APK to include it... lol
So if you used a DeOdexed rom, you will not notice anything. If you use an Odexed (i.e. stock) rom like I do, you will get a message when the phone boots that android is updating and the only file that will be deOdexed will be the SecPhone_ATT.apk file. If you are rooted, you can verify using file managers on your phone to verify that there is not a SecPhone_ATT.odex file in System/App after the update. If there is, then you can delete it (only if you actually did the update though).
I somehow lost the stock S Planner app on my SG3 stock ROM. Can someone please upload? I've searched everyone on XDA but can't find one.
Thanks
Nwbie07 said:
I somehow lost the stock S Planner app on my SG3 stock ROM. Can someone please upload? I've searched everyone on XDA but can't find one.
Thanks
Click to expand...
Click to collapse
This it? I don't have my phone right now, so I couldn't check... I just downloaded a ROM and pulled what I thought was it.
I apologize if it's not. :silly:
codycorexxx said:
This it? I don't have my phone right now, so I couldn't check... I just downloaded a ROM and pulled what I thought was it.
I apologize if it's not. :silly:
Click to expand...
Click to collapse
Thanks man. I'll give this a try.
its not
codycorexxx said:
This it? I don't have my phone right now, so I couldn't check... I just downloaded a ROM and pulled what I thought was it.
I apologize if it's not. :silly:
Click to expand...
Click to collapse
its the widget not the S planner D:
Any luck on finding the S-Planner App? I am on the LiquidSmooth ROM, and the only thing i miss about the stock ROM was the S-Planner. Can someone post the Apk file? Thanks!
This is the calender from LH9.
https://dl.dropbox.com/u/62284246/Calendar_4.0.4-I747UCALH9.apk
From my understanding of samsung and their wisdom, the S-apps are very intertwined with the Touchwiz interfaces. Roms like AOKP wont run them. If I am wrong, please correct me.
the Stock Email and Calender apps on my SG3 are the ONLY reasons I have not gone to a custom rom on this one. they are much nicer and more robust than the AOSP versions. If I had teh time to learn more about porting them, I would do so myself.
I also have a galaxy tablet. the stock ICS on it is mediocre at best. I tried going to AOKP, but again, the Calender and Email apps are far superior on the stock roms.
It's being a long time, but just in case you guys still looking for it here they are.
Just copy and paste it to /system/app and change permissions.
YOU NEED ROOT PERMISSIONS
Hallo,
I use the original Samsung ROM, but want the original calendar widget in inverted style. If I install the inverted google calendar I loose the S Planner functions for setting new calendar entries etc. Has anybody the original calendar widget that can run with the S-Planner?
Best regards,
Marc
marchusar: Post 2 isnt what you are looking for?
You can find all you need here
P.S. OP WRONG THREAD MAN! please try next time not to do the same.
arys64 said:
It's being a long time, but just in case you guys still looking for it here they are.
Just copy and paste it to /system/app and change permissions.
YOU NEED ROOT PERMISSIONS
Click to expand...
Click to collapse
I have no idea how the permissions have to be changed What has to me activated?
EDIT: I think I found the answer: rw-r--r--
nice love it thanks
downloaded all files provided in this thread and s-planer still crashing on my s3 i9300..
Im rooted and on custom rom from PARDUS ( v13beta4) rom is samsung based so everything should work.
got error touchwiz stopped responding ... when putting widget on screen.. sometimes its fine for few seconds.
I had to flash a custom rom on my fathers s3 because he need a higher version for bank app...
Now he miss his ~calendar app (S-Planner) for his phone, any chance to get a ported version ? Running some slim rom 4.4 on his phone.
S-Planner is a Samsung app and will require a stock Samsung kernel and framework to work. As far as I know, it will not work on a custom ROM that is not based on a stock ROM.
Does anyone have an installable APK or flashable zip file for the stock note 8 s-note app?
Alternatively how do I pull if off the stock 4.2.2 ROM myself?
Thanks
rezadue said:
Does anyone have an installable APK or flashable zip file for the stock note 8 s-note app?
Alternatively how do I pull if off the stock 4.2.2 ROM myself?
Thanks
Click to expand...
Click to collapse
I have posted a file for side loading, just search for it in the Q&A threads.
You do not have to flash to make it work.
Your the second one to request such a thing, and makes me wonder why these things are getting deleted when they have no remove feature in settings.
I think people going overboard "debloating" and or freezing/uninstalling to much with TB
Anywho you could try to use 7zip and extract the apk from a flashable Rom
Hoping this helps
Sent from my SPH-L900 using xda premium
Thanks for the responses. This has nothing to do with de-bloat or even missing APKs.
I have been using YKK's 4.3 TW Note 3 ported ROM, and his ROM only has the Note version of s-Notes which does not have speech recognition and formula match in it.
I would like to grab the APK from the stock ROM S-Note and see if I can install and use it with his ROM. That is all.
Gooberdude, Is this the thread you mean?
http://forum.xda-developers.com/showthread.php?t=2685544
If so, is th is the same as S-Note ?
@rezadue Check your PM and let me know if that is what you was after
Hoping this helps
Sent from my SPH-L900 using xda premium
FYI, the APKs are not enough to make it work on 4.3
It keep crashing on me.
Thanks for the help anyway.
Harjan112 said:
@rezadue Check your PM and let me know if that is what you was after
Hoping this helps
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
rezadue said:
FYI, the APKs are not enough to make it work on 4.3
It keep crashing on me.
Thanks for the help anyway.
Click to expand...
Click to collapse
It was worth giving a try, and I guess that's is why I try to stay away from ported Rom's, I never had any luck with them there was always something that wouldn't work quite right.
Sent from my SPH-L900 using xda premium