Develop Bugs

Unlock NAND on MAC anyone?

tryin to get mac to adb to device, but cannot get it to work.
anyone have success? would like to test these nice roms out.
thanks

nitty917 said:
tryin to get mac to adb to device, but cannot get it to work.
anyone have success? would like to test these nice roms out.
thanks
Click to expand...
Click to collapse
I did it on my MBP. What problems are you having?

I did it on my macbook..

I also did it on my Mac. Like someone else said what specifically is the issue you're encountering?

there is a post in about using Terminal app from the market to do this and it works!

brianb7590 said:
I did it on my MBP. What problems are you having?
Click to expand...
Click to collapse
thanks, I cant get it to communicate in terminal,
i have no idea. i dloaded the sdk, dragged the adb from tools folder,
onto the terminal, it opens up all the adb commands but after that i cant type
nothing.

nitty917 said:
thanks, I cant get it to communicate in terminal,
i have no idea. i dloaded the sdk, dragged the adb from tools folder,
onto the terminal, it opens up all the adb commands but after that i cant type
nothing.
Click to expand...
Click to collapse
Don't drag it to the terminal.
I would navigate to the directory where you stored the SDK and go to the tools folder and run it that way or you search up how to set your PATH to include the tools folder.

nitty917 said:
tryin to get mac to adb to device, but cannot get it to work.
anyone have success? would like to test these nice roms out.
thanks
Click to expand...
Click to collapse
Like the others who have already replied, I also did it on my mac and was a complete noob. It was only through much trial, error, YouTube, and 3 other sites that I figured it out. Needless to say I'm now fluent in adb and would be happy to answer any questions you have since I was in exactly the same shoes as you last weekend. Below are the biggest things you need to know when you start:
1. When you plug the phone into your computer make sure you select "Charge Only." If you select "Use Phone as Disk Drive" you won't be able to write to the phone, only read. I ran in circles for a long time getting "Read-Only File System" errors and it was all due to having the phone mounted as drive.
2. Make sure you have USB Debugging turned on. After that, you should be able to communicate with the phone fine.
3. ADB - The instructions are nearly identical regardless of operating system but on a mac you need to add "./" (without the quotes) before adb commands. For example, lets say I have a file on my desktop called "Test_File.img" that I want to push to the root of the sdcard. On my Mac I would type "./adb push /Users/Bryan/Desktop/Test_File.img /sdcard/" (without the quotes of course) & (Bryan is my Username)
4. To avoid any issues make sure none of the folders or file names you are working with have spaces in the name.
Hopefully all this helps and does no lead to more confusion than when you started. Again, if there are any specific errors you are seeing post them here and either I or someone else would be happy to answer them.
Bryan

okolowicz said:
Like the others who have already replied, I also did it on my mac and was a complete noob. It was only through much trial, error, YouTube, and 3 other sites that I figured it out. Needless to say I'm now fluent in adb and would be happy to answer any questions you have since I was in exactly the same shoes as you last weekend. Below are the biggest things you need to know when you start:
1. When you plug the phone into your computer make sure you select "Charge Only." If you select "Use Phone as Disk Drive" you won't be able to write to the phone, only read. I ran in circles for a long time getting "Read-Only File System" errors and it was all due to having the phone mounted as drive.
2. Make sure you have USB Debugging turned on. After that, you should be able to communicate with the phone fine.
3. ADB - The instructions are nearly identical regardless of operating system but on a mac you need to add "./" (without the quotes) before adb commands. For example, lets say I have a file on my desktop called "Test_File.img" that I want to push to the root of the sdcard. On my Mac I would type "./adb push /Users/Bryan/Desktop/Test_File.img /sdcard/" (without the quotes of course) & (Bryan is my Username)
4. To avoid any issues make sure none of the folders or file names you are working with have spaces in the name.
Hopefully all this helps and does no lead to more confusion than when you started. Again, if there are any specific errors you are seeing post them here and either I or someone else would be happy to answer them.
Bryan
Click to expand...
Click to collapse
If you're going to be using adb on a regular basis, and want to avoid typing "./" before each command, you can add the android sdk tools path to your .bash_profile file in your home directory. Something along the lines of:
export PATH=${PATH}:/path_for_ur_sdk_folder_location/android-sdk-mac_86/tools

mocalve said:
If you're going to be using adb on a regular basis, and want to avoid typing "./" before each command, you can add the android sdk tools path to your .bash_profile file in your home directory. Something along the lines of:
export PATH=${PATH}:/path_for_ur_sdk_folder_location/android-sdk-mac_86/tools
Click to expand...
Click to collapse
That wont be saved. It goes away after every reboot.

Fixter said:
That wont be saved. It goes away after every reboot.
Click to expand...
Click to collapse
True, if you enter it from the command line. But if you add it to the .bash_profile file , it will stick... at least on my Mac Pro it does...

mocalve said:
True, if you enter it from the command line. But if you add it to the .bash_profile file , it will stick... at least on my Mac Pro it does...
Click to expand...
Click to collapse
If I add those entering nano .bash_profile and enter that command and the pressing Ctrl X and Yes it will stick?

Fixter said:
If I add those entering nano .bash_profile and enter that command and the pressing Ctrl X and Yes it will stick?
Click to expand...
Click to collapse
It should... although I use vi instead of nano. Regardless, after saving the .bash_profile, you'll have to fully exit the terminal application and restart for the path setting to take effect. After that, it'll be in effect every time you start terminal.

mocalve said:
It should... although I use vi instead of nano. Regardless, after saving the .bash_profile, you'll have to fully exit the terminal application and restart for the path setting to take effect. After that, it'll be in effect every time you start terminal.
Click to expand...
Click to collapse
Nano is way cleaner. And yeah. It got applied.

[Q] rooting slide in ubuntu

Hey If anyone can help i have a few questions about rooting the slide in ubuntu
the "loop" script will not run regardless of what i do....also i can't seem to get the phone to show up with adb devices when i am in the bootloader
i can see the phone when it is in the rom but for some reason it won't show in the bootloader
thanks in advance

just type
Code:
adb devices
in terminal, and then when you select recovery and press enter, press "ENTER, UP, ENTER, UP, ENTER, UP...) really fast...and hope it works! if not lather, rinse, repeat...

There are instructions in the rooting thread on making an equivalent script for MacOS (which should work under Linux as well.) If you tried to run a DOS batch file under Linux thinking it would work...well, that's a judgment for another day
-------------------------------------
Sent via the XDA Tapatalk App

The Mac script does not run as a sh script on linux.
(PS: don't for the ./ before adb on a linux term. (./adb etc...))
beartard said:
There are instructions in the rooting thread on making an equivalent script for MacOS (which should work under Linux as well.) If you tried to run a DOS batch file under Linux thinking it would work...well, that's a judgment for another day
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Sent from my T-Mobile myTouch 3G Slide using Tapatalk

Ive got a loop script for linux that I can send you when I get home. And like Indikut said, don't forget to add "./" before adb.

chrisinaz said:
Ive got a loop script for linux that I can send you when I get home. And like Indikut said, don't forget to add "./" before adb.
Click to expand...
Click to collapse
No need for the ./ if you added the sdk tools folder to your PATH.

Why that MacOS script doesn't work in bash on Ubuntu is beyond me. It looks to be formatted correctly.
Code:
#!/bin/sh
while [ 1 ]; do
adb devices;
sleep .25;
done
You could always use the following equivalent:
Code:
#!/bin/sh
watch -n .25 adb devices;
done
Assuming adb is in your path, this would run it every 1/4 second. You could, of course, change it to suit your location for adb (/usr/local/bin/adb or other location).

Cool thanks ..I will try that for the loop script
The other issue I have is that I can't see my phone as a device when I type adb devices in the bootloader ...it works fine when the phone is in the rom tho....I tried searching for the problem but I can't seem to find a solution ....I may just have overlooked it tho

beartard said:
Why that MacOS script doesn't work in bash on Ubuntu is beyond me. It looks to be formatted correctly.
Code:
#!/bin/sh
while [ 1 ]; do
adb devices;
sleep .25;
done
You could always use the following equivalent:
Code:
#!/bin/sh
watch -n .25 adb devices;
done
Assuming adb is in your path, this would run it every 1/4 second. You could, of course, change it to suit your location for adb (/usr/local/bin/adb or other location).
Click to expand...
Click to collapse
thanks again for the help with my problem i have a feeling the macos script would of worked i was using the wrong command i ended up typing "sh loop.sh" and it ran the script ....alltho i don't see it spamming adb devices ...it seems to just output it one time ....
now all i have to do is get the phone to show up when its in the bootloader....off to the search button i go

newspeak said:
thanks again for the help with my problem i have a feeling the macos script would of worked i was using the wrong command i ended up typing "sh loop.sh" and it ran the script ....alltho i don't see it spamming adb devices ...it seems to just output it one time ....
now all i have to do is get the phone to show up when its in the bootloader....off to the search button i go
Click to expand...
Click to collapse
As soon as you hit power to go to recovery either A) Activate the stupid script or B) mash ENTER+UP+ENTER+UP+ENTER until your keys fall off. I only got it to work the latter way.
Also, in Linux I've found that you'll get ???????? NO PERMISSIONS unless you do sudo ./adb devices.

The first time you run adb in a session, it should be started with sudo, since that starts the adb daemon. After that, any normal user's permissions (like running the script) should be ok. Make it easy on yourself and copy the adb executable to some place in your path (I use /usr/local/bin/). That way, you can delete the entire SDK unless you have plans for developing apps for Android.
I tried using my second code snippet above as loop.sh. I didn't go any higher, but it really doesn't have to work really quickly. I went up to .5 (executing "adb devices" twice a second) and it worked fine. You won't see a scrolling output like you would in DOS. The screen just updates if/when new info comes up (like showing the phone offline or in recovery.) When you get to the phone icon with the red triangle, hit VolUp and Power at the same time to get the recovery menu. The rest of the normal root tutorial should work for you.

ok thanks again for the help so far....here is where i am at ...i put adb in /usr/local/bin ...i can use adb devices ....the script is working for me but now when i get to the point where i push over the first file it says permission denied
i make sure to start adb with sudo ....i even tried running everything from a root terminal but i still get the same thing....i have already tried killing the adb server and restarting it with root permissions ...i have tried pushing the file with devices still listed as offline
kind of at a loss
here is what i get btw
"[email protected]:~/androidsdk/tools$ adb push ota.zip /sdcard/update.zip
failed to copy 'ota.zip' to '/sdcard/update.zip': Permission denied
[email protected]:~/androidsdk/tools$
"

I'm using a pretty fresh install of Ubuntu Lucid. I haven't messed with my user's groups or anything, so it's still fairly stock.
All I've done is copied adb to /usr/local/bin. The first run of adb (adb devices) is done as root using sudo. You could try running "sudo adb root" to begin with, and see if that makes a difference. After that, I can run any adb push commands as the normal user in GNOME's terminal.
Assuming you're set up like I am, if you're getting a permissions error after doing that, I'd hazard a guess and say the problem is on the phone's side rather than the computer.
Check and make sure USB debugging is checked in your settings. Beyond that, I'm stumped.

[FIX] Permissions Work Around for ICS

Script to flash via CWM to fix fix perms has been done by minotauri (sorry if miss spelled will fix when on a computer) he deserves credit for the edify:
To Run Fix Perms While in Recovery Flash this file each and every time you need it run [for now]:
http://goo.gl/hrL7E
The Next Script is one you can flash via CWM and it will replace the file ROM Manager uses so this will remain between restarts and you can use it via ROM Manager or Script Manager anytime you want!:
Thank Minotauri again for another beautiful Edify!
http://goo.gl/qPpC3
Flash via CWM and it well work for that flash just flash anytime you need to run it via recovery until I see about permanently copying it over existing script or still can run manually with this guide if you choose [scroll down below the additional update on how to fix the script to run using ROM Manager while in OS!].
I posted this in a couple ROM threads and was asked to throw it out here as folks from different ROMs are all affected. I can only speak for TMobile Galaxy S2 as that is what I own, drive and work on...
I will be cleaning up the post a bit when I get time just want it posted so others can use the information add it really seems to help clean up small issues (even some report fixing multiple FCs after running fix perms this way!)
NEWEST UPDATE 2012.04.19
OK FIX FOR RUNNING FIX PERMS INSIDE OS VIA ROM MANAGER
If you adjust first line in script to #!/system/xbin/sh viola ROM Manager does not freeze [finally]
I did this with Ghost Commander [don't forget settings> check auto root] and long press fix_permissions and choose edit tapping it will have GC try to execute it.
I also moved down to set variables piece and placed 1s instead of 0s next to mount system, mount data, and remove (as in REMOVE stale data ) [should be all caps in /data/data/com.koushidutta.rommanger/files/fix_permissions
I am still working on finding a way of making those changes permanent in /sbin under recovery boots
Fix Permissions Work Around ICS
Run Fix Permissions via ADB Shell with Phone in Recovery
I have taken the time to document what should be a complete guide to running fix permissions while the phone is in the Recovery menu using adb.
I am posting the quick steps right after this, but if you scroll below that this is an extended step-by-step guide.
Code:
Running Fix Permissions
On Phone: go in to Mounts and Storage Menu from Main Menu and choose to mount /data and /system
On Computer: type adb shell
This should give you a ~# prompt
Now type "sh /sbin/fix_permissions -l -r" [without quotes]
and now you should see a bunch of text scroll by and then it will say fix permissions completed blah when done.
that's it type exit and hit enter about 3x [one will change ~# to ~$ then it will drop back to C:\blah and then one more time will close that window as well
Supplies [Phone, USB Cable and Android SDK (http://developer.android.com/sdk/index.html)
Follow the link to install Android SDK [they have directions on site]
first time installing adb? [Skip otherwise]
To Add ADB to your computers path [to run it from any directory]
Windows:
Open Command Prompt [Click Start, Click Run, Type in cmd and hit Enter [XP]]
Open Command Prompt [Click Start, type cmd in whitebox and hit Enter [Vista and 7]]
type set PATH=%PATH%;C:\android-sdk\platform-tools [or wherever you put android sdk just add platform-tools to the end [it is a hidden folder]
Linux [OSX should be same]:
PATH=$PATH:/home/user/android-sdk/platform-tools [or adjust for where you saved it]
export PATH
Now That You Have ADB and path set, time for good stuff
Opening a Command Processor
Open a Command Prompt [Windows] or Terminal [Linux or OSX]
Windows: Click Start, Click Run, Type cmd and hit enter [XP]
Click Start, type in to Whitebox cmd and hit Enter [Vista and 7]
Linux: Hold alt and hit F2 on keyboard [should see a run box now]
Type in xfce4-terminal and hit Enter [or substitute your terminal command this is xubuntus]
Once a Black and White Screen Opens...
Gaining Elevated [Admin or Root Privileges]
Ok, some further testing shows me you should have root or admin access to command processor before running ADB.
In Windows
Type The Following in to the command prompt window already open...
runas /user:%computername%\administrator cmd
hit enter when done
[yes just like that including %computername% windows will fill it in with proper info copy/paste if needed right clicking in command window should paste text for you [if not right click on the icon in left hand corner of title bar choose properties and place checks in the quick edit and insert mode boxes under Options tab]
now it will ask for a password if you have not set one you need to go to control panel users and set a password on admin account before this will work
Once you enter the password and hit enter a second command window will open and will have Administrator in the title
Now You can continue on
In Linux
With Terminal window open type:
gksudo xfce4-terminal& [sub your terminal command if not using xubuntu]
once you hit enter it may take a second but you will get a password prompt enter in your password and a new terminal will open and it will have [email protected] in the title
Now you can continue on...
Checking USB Connection
type in adb devices and hit enter
[if you get a command not found you will have to use cd to move to directory with adb [ie cd c:\android-sdk\platform-tools]
If it comes back with ?????? as serial number it is not connecting correctly follow the next steps otherwise skip the next bit if you didnt get all ?
I get ?????, what gives?
This seems due to not running command prompt or terminal as administrator or root user [Windows / Linux Respectively]
You will need to do the following in order
Disconnect USB from phone
On Phone: In Advanced menu choose restart recovery
On Computer: type in adb kill-server and hit enter
Reconnect USB cable
Be Sure To Follow Section above labeled: Gaining Elevated [Admin or Root Privileges] and then continue on
On Computer: type adb devices and you should see a mix of letters and numbers
and that means we are good to go on
Running Fix Permissions
On Phone: go in to Mounts and Storage Menu from Main Menu and choose to mount /data and /system
On Computer: type adb shell
This should give you a ~# prompt
Now type "sh /sbin/fix_permissions -l -r" [without quotes]
and now you should see a bunch of text scroll by and then it will say fix permissions completed blah when done.
that's it type exit and hit enter about 3x [one will change ~# to ~$ then it will drop back to C:\blah and then one more time will close that window as well
Device: TMobile Samsung Galaxy S2 [SGH-T989]
ROM: Yaldak's Vanilla ICS RC2
Radio: Blaze ICS
Performance Mod: Supercharger v6 update 8
Client: Xparent Green TapaTalk [latest]

Known Issues:
-------
Issue: My computer does not connect when I use adb shell [or I get ????? when I use adb devices]
Resolution:
I have found that i have to connect my phone 2x to computer to get it to work correctly most of the time, do the following
Disconnect USB from phone
In advanced menu on phone choose Restart Recovery
on computer: adb kill-server
Reconnect USB cable
on computer: adb devices
and you should now see a mix of numbers and letters and not ????? and now adb shell should connect
Issue when I try sh fix_permissions it says it can not find the file
Resolution: This is normally caused when you have not mounted /system [via phone]
or you did not use sh /sbin/fix_permissions [or be sure to do cd /sbin before sh fix_permissions
Issue: I get UID Read-only variable error and fix permissions does not run
Resolution: This is normally caused by either not mounting /system [via phone]
or not using sh fix_permissions.
Issue: Some of my apps are listed as /data/blah and it says it can not find the file
Resolution: This is normally caused by not mounting /data [via phone]
Issue: CWM will not mount /system or /data saying it can not find or read them
Resolution: I have found CWM does not like to load mounts once they are encrypted. If you have encrypted your device /system and /data are affected, try unencrypting your phone and trying again.
(this is a good thing it shows third parties tools trying to get around booting OS to read data will not be able to get at the information in your phone)
Device: TMobile Samsung Galaxy S2 [SGH-T989]
ROM: Yaldak's Vanilla ICS RC2
Radio: Blaze ICS
Performance Mod: Supercharger v6 update 8
Client: Xparent Green TapaTalk [latest]

SEE This post for the current script
http://forum.xda-developers.com/showpost.php?p=25023284&postcount=22
Sent from my SAMSUNG-SGH-T989 using xda premium

Well judging by the title that you have there referred to running the script via recovery adb to begin with.
A lot of users don't realize if fix perms says complete in 2 secs it had a problem so I didn't know of that thread, but hope this will be a catch all for fix perms and not just for those who already tried via recovery and adb shell and got that specific error.
Thanks for looking out though
Device: TMobile Samsung Galaxy S2 [SGH-T989]
ROM: Yaldak's Vanilla ICS RC2
Radio: Blaze ICS
Performance Mod: Supercharger v6 update 8
Client: Xparent Green TapaTalk [latest]

jangst123 said:
This is already and has been in the Q & A section.... Not development, but I wish the developers would look at it and figure out why we have issue on ICS
http://forum.xda-developers.com/showthread.php?t=1595806[Q] Problem with Fix Permissions (line 64: UID readonly variable) [WORK AROUND FOUND]
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
I think posting this in Dev section is perfect sense. Also, thanks for the fix. This has stumped me for a while trying to figure out what to do.

When trying this, I get the message:
cat: can't open '/data/system/packages.xml': No such file or directory.
It says that twice and concludes with fix permissions ended at yada yada. I followed every command and instruction to the letter, what could be the issue?

Hey I got idea,, lets make another thread in the general section and Themes,,
Sorry don't think this belongs here, IMO
MOD,, please delete 1 of the threads,, or merge them or something,, no point in having 2
Not that I'm not happy a work around has been found!
Hopefully now the developers will figure out the source of the problem

would it be possible to bake this into a rom, or to create a CWMR zip file to make the needed changes?

Dougshell said:
would it be possible to bake this into a rom, or to create a CWMR zip file to make the needed changes?
Click to expand...
Click to collapse
+1 I'm completely stumped!

I can't get adb to even reconize the damn phone im on ravers remix to ics

peppersu812 said:
I can't get adb to even reconize the damn phone im on ravers remix to ics
Click to expand...
Click to collapse
turn on debugging

RaverX3X said:
turn on debugging
Click to expand...
Click to collapse
Raverx3x any idea why we are having this problem!?
Should we be running a different fix_permissions on ICS?
Also see..
http://forum.xda-developers.com/showthread.php?t=1595806
being that we seem to be determined to have this discussion in 2 different threads

l-levit said:
Hey I got idea,, lets make another thread in the general section and Themes,,
Sorry don't think this belongs here, IMO
MOD,, please delete 1 of the threads,, or merge them or something,, no point in having 2
Not that I'm not happy a work around has been found!
Hopefully now the developers will figure out the source of the problem
Click to expand...
Click to collapse
Or you could have devs talk here and keep users in QA so this doesn't get flooded with chatter.
Our should we delete all those ROM threads in Dev that exist in QA as well?
Device: TMobile Samsung Galaxy S2 [SGH-T989]
ROM: Yaldak's Vanilla ICS RC2
Radio: Blaze ICS
Performance Mod: Supercharger v6 update 8
Client: Xparent Green TapaTalk [latest]

OGWisdom said:
When trying this, I get the message:
cat: can't open '/data/system/packages.xml': No such file or directory.
It says that twice and concludes with fix permissions ended at yada yada. I followed every command and instruction to the letter, what could be the issue?
Click to expand...
Click to collapse
Did you forget to mount /data in mounts and storage (on phone) before running?
Did you encrypt your device? I have CWM fail to load mounts after encryption
Device: TMobile Samsung Galaxy S2 [SGH-T989]
ROM: Yaldak's Vanilla ICS RC2
Radio: Blaze ICS
Performance Mod: Supercharger v6 update 8
Client: Xparent Green TapaTalk [latest]

Oh and other thread just ganked my fix which is cool but I did this on my own not in response to anything so seeing as how I had to put in 2 hours of actual research, scratching my head, trying many different ways and seeing as how this is more of a process then simply loading a script I wanted to maintain it here until I can edit script or another Dev does making it cleaner and easier to manage and thus ready for more casual users found in QA threads.
Sheesh, sorry I figured this out maybe next time I won't pass on the info for fear of debating where it should be posted rather than the content and how to make it better going forward.
Device: TMobile Samsung Galaxy S2 [SGH-T989]
ROM: Yaldak's Vanilla ICS RC2
Radio: Blaze ICS
Performance Mod: Supercharger v6 update 8
Client: Xparent Green TapaTalk [latest]

u mad bro
Interesting,, the other thread was started 12th April 2012, 10:35 AM,
plus it looks like he quoted your original post from BlackEdition, and gave you credit,, before you even chose to make another thread in a section that is normally reserved for developers and their ROM's, scripts, or mods. All while u r over here bashing the other thread! Thanks for helping, but grow up and follow the rules
anyway make sure you are setting the path to adb
see http://forum.xda-developers.com/showthread.php?t=1161776 for more information

peppersu812 said:
I can't get adb to even reconize the damn phone im on ravers remix to ics
Click to expand...
Click to collapse
I have instructions on that issue on post.
Did you run adb devices and get ????? unknown device?
I had to run terminal as administrator, then I issued adb kill-server and reconnected phone and then did adb devices again and then it will say starting adb blah blah blah and then I got 6f7y88 [made up it should be a series of numbers and letters and no ?]
make sure adb devices gives you a valid response and not ????? I have found I almost always have to connect phone twice and at least do the above [with regular terminal I only used admin on first run but there in case it does make a difference].
So everytime I conect [or just about] I have to connect the phone
run adb devices get ????? and then
Disconnect USB
on phone in advanced menu choose restart recovery
on computer adb kill-server
Reconnect USB
Run adb devices and get a good serial number listed
I have to do actual work for a couple hours and then will be cleaning up main post on top and adding that bit in a place it get noticed more easily bear with me as I make my boss happy [he is wondering why things aren't getting done round here now ut-oh LoL] then I will clean up the information.

l-levit said:
u mad bro
Interesting,, the other thread was started 12th April 2012, 10:35 AM,
plus it looks like he quoted your original post from BlackEdition, and gave you credit,, before you even chose to make another thread in a section that is normally reserved for developers and their ROM's, scripts, or mods. All while u r over here bashing the other thread! Thanks for helping, but grow up and follow the rules
anyway make sure you are setting the path to adb
see http://forum.xda-developers.com/showthread.php?t=1161776 for more information
Click to expand...
Click to collapse
Um, actually I just noted they used my solution and said it was cool to do so, it appears you have an axe to grind with me and are just nit picking anything I say. I am sorry if yoyu do not feel my work is not to the same level as other folks, but since I put in work and this is more of a manual fix you have to work at rather than an easy to use script [yet], I did not want to post it in QA and all until I have something better for general release.
Also, I am not mad, just wondering why you would rather start silly arguments over placement of usable useful information rather than helping to make said information better and more stable for release to others.
Are you mad I figured this out and posted it before you or something as I have never talked with you and given you no reason to troll my threads?
When I do have a stable script [well at least semi stable for release to dev then more stable for QA]. The way I view QA is for general users questions and answers and since I was going to work on DEVELOPING a script that does work I was holding off on a QA thread, once I do get a script together I will be releasing it. In the meantime I was hoping to have more advanced users and devs dissect my process here and give me feedback towards a full script.
ALSO, by using sh /sbin/fix_permission OR doing cd /sbin and then fix_permissions you negate any need to do any path variable adjustments BUT if you rather then here is how...
when in adb shell before anything
PATH=$PATH:/sbin
export PATH
will then make it so you can just fix_permissions regardless of where you are in directory tree [but so will sh /sbin/fix_permissions so either way is up to you]
or if you are reffereing to adb on the computer
in Windows with command prompt open
set path=%path%;C:\android-sdk\platform-tools [or adjust for where you saved adb]
so if setting a batch program you could use the following to copy/paste [just adjust directories if you saved files differently]
The following is off the cuff until I begin writing the full script and automate things but it is a very basic start
Code:
@Echo Off
Set Path=%PATH%;C:\android-sdk\platform-tools
adb devices
Echo If you see ????? then restart recovery and reconnect the phone
Echo and run adb kill-server and re-run this batch script
pause
Echo when you hit any key this will start adb and put you in the shell you
Echo Will have to run fix_permissions -l -r manually
Echo Be sure to mount /storage /data via phone first
adb shell
or in Linux [OSX should be similiar if not the same]:
from terminal
PATH=$PATH:/home/user/android-sdk/platform-tools [or adjust for where you saved adb
export PATH

No it just bothers me when people ignore the rules and the Developers! Raver even told you were it belonged, and you chose to ignore Raver and the rules!
The fix will be to modify recovery for use with ICS on our devices or a modified fix-permishions script baked into the ROMS

RaverX3X said:
turn on debugging
Click to expand...
Click to collapse
I did bro just having trouble getting the cmd to recognize adb I have it downloaded I changed it still nothing don't know what the hell is wrong with it but IM fixing to improve on my golf swing on this damn vista desk top !
Sent from my SAMSUNG-SGH-T989 using xda premium

[Q] help with adb pull [Solved]

so my wife dorpped her s3 and broke the screen, the phone is rooted and i have adb debugging turned on i can use adb to pull/puch etc. but i dont know how, could some on tell me what adb commands i need to issue to the device to pull her internal sd data to my computer and push it back to her new s3, i also need to know how to wipe her phone with adb and reset to stock so i cna return it to the insurancce company, if anyone could tell me how to basically pull everything from her phone, internal sd data, and her text messages i know to pull the texts and view them i will need to use sqlite 3 to view the .db of her text messages but i cant figure out the commands to do so and i cant figure out how to format the commands so that it will pull the info to my desktop for viewing through sqlite 3 on the computer, also if i need to install sqlite 3 on the device with adb i need to know the commands for that as well, all help is welcomed, i have to get this thing back to stock in the next week or so, you are even more than welcome to call me an idot noob because i really am, i am very technically inclined and can follow complex instructions provided they are complete, please help ! lastly is there an adb command that would transfer what should be displayed on the screen if it worked within a emulator window if so please include that information as well.
This has been solved thanks to the info that was given, i was able to wrap my head around the entireity of adb, and my actual problem was not formatting of commands, my wife had a lock screen so i had to get that unlocked before adb would allow pulls if you need to do this with you phone i have posted a tutorial in the android general development and hacking [developers only] forums

MotoDefier said:
so my wife dorpped her s3 and broke the screen, the phone is rooted and i have adb debugging turned on i can use adb to pull/puch etc. but i dont know how, could some on tell me what adb commands i need to issue to the device to pull her internal sd data to my computer and push it back to her new s3, i also need to know how to wipe her phone with adb and reset to stock so i cna return it to the insurancce company, if anyone could tell me how to basically pull everything from her phone, internal sd data, and her text messages i know to pull the texts and view them i will need to use sqlite 3 to view the .db of her text messages but i cant figure out the commands to do so and i cant figure out how to format the commands so that it will pull the info to my desktop for viewing through sqlite 3 on the computer, also if i need to install sqlite 3 on the device with adb i need to know the commands for that as well, all help is welcomed, i have to get this thing back to stock in the next week or so, you are even more than welcome to call me an idot noob because i really am, i am very technically inclined and can follow complex instructions provided they are complete, please help ! lastly is there an adb command that would transfer what should be displayed on the screen if it worked within a emulator window if so please include that information as well.
Click to expand...
Click to collapse
I'm not going to call you an idiot noob. It seems to me that you know a little more than you express. A few Google searches could answer all of your questions. You are asking for someone to write you a novel, it's not going to happen.

Aerowinder said:
I'm not going to call you an idiot noob. It seems to me that you know a little more than you express. A few Google searches could answer all of your questions. You are asking for someone to write you a novel, it's not going to happen.
Click to expand...
Click to collapse
google has actually been un helpful in this dilema, however I think the explaination of adb commands on the sdk's page looks like it has enough information for me to write, my own novel (lol) so I will start there tonight, and hope that I understand the procedures described as well as I think I do, thanks for the reply anyway

Now that I have a little more information I guess what I really was trying to ask is for someone to give me a little better understanding of how issuing commands work I know how to issue ADB commands for instance with ADB HELP OR HELP ALL the command looks like this in the example. Adb pull [<local>] [<remote>] i dont understand what information adb is looking for where it says local and remote, is adb looking for me to type the [<local>] [<remote>] exactly this way or is it leading me to give a path for local and a path for remote, if so how do i go about figuring out said paths?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

Local would be path on pc, remote would be path on phone.

sorry, for asking probably dumb questions
Aerowinder said:
Local would be path on pc, remote would be path on phone.
Click to expand...
Click to collapse
I know that it sounds stupid that i know how to open adb, i know how to issue commands (mostly) and i know that you said you think i know more than i am taking credit for, but heres the thing i do know ALOT about computers and can do almost anything with them however Command line utilities is not my strong suit, so local is the path on the pc remote is the path on the phone i am assuming that this would be the proper way to pull the sd data
adb pull -shared [< / sd>] [< C:\user agentlogon\Desktop>] if i wanted to store the file on my desktop would that be correct or am i just completly command line retarted? , i know that this isnt the real path but if it were is this correct formatting for the command line?

Like this: adb pull -shared "/sd" "C:\user agentlogon\Desktop"

Adb kill-server
Adb start-server
Adb pull <file> <Local>
Sent from my LT26i using xda app-developers app

Aerowinder said:
Like this: adb pull -shared "/sd" "C:\user agentlogon\Desktop"
Click to expand...
Click to collapse
Ok, so sorry, at this point i feel like a total idiot and im sure if your not right there with me your getting close, but i think this last question will help me understand command line utils better in the future, so when you see [<>] am i correct that the utility is showing me its okay to perform said command on [ ] directories <> files ? Also i am a very literal learner so do i use the quotes on the command or are you just quoting me?

[<>] = variable. Replace the entire sequence. So, [<local>] = "C:\directory\file.ext" This is not standardized across commandline apps. The [<>] is only meant to show the user that they need to replace this with his/her own value.
In commandline utilities, spaces separate commands, this is why you need quotations around directories that have spaces. If you don't, the C:\... directory will be interpreted as two seperate commands, resulting in a syntax error. I always use quotations around directories out of habit. / is often used as a switch. To be safe, always quote directories. This is standardized across all commandline apps.

TrinityHaxxor said:
Adb kill-server
Adb start-server
Adb pull <file> <Local>
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Yeah i got the kill start sever on lock, and i am wanting to pull thecentire contents of the sd, not a single file, but thanks for your input it is all welcomed!

Aerowinder said:
[<>] = variable. Replace the entire sequence. So, [<local>] = "C:\directory\file.ext" hhis is not standardized across commandline apps. The [<>] is only meant to show the user that they need to replace this with his/her own val
In commandline utilities, spaces separate commands, this is why you need quotations around directories that have spaces. If you don't, the C:\... directory will be interpreted as two seperate commands, resulting in a syntax error. I always use quotations around directories out of habit. / is often used as a switch. To be safe, always quote directories. This is standardized across all commandline apps.
Click to expand...
Click to collapse
now i have a new problem it is saying /sd does not exist do you possibly have a screenshot of the path for the sd in a file manger you could post for me if not i will try to look at it with my wifes new phone and hope that the stock file system is the same as the modded system she has on the broken phone. also if this doesnt work how would i just do a full wipe of the phone so it looks like i just wiped it for privacy.

Try:
/storage/sdcard
/storage/sdcard0
/mnt/sdcard
/mnt/sdcard0
One of those should work.

Aerowinder said:
Try:
/storage/sdcard
/storage/sdcard0
/mnt/sdcard
/mnt/sdcard0
One of those should work.
Click to expand...
Click to collapse
IIts not giving me any errors, but its not giving me the files either, i tried to adb root to see if that would change and it says adbd cannot run as root in production builds, i tried to adb remount it says opperation not permitted, i tried adb shell then su and adb freezes and wont let me exit shell, it either freezes or just echo's what i type, so if i type exit it returns exit showing the word exit twice but leaves me no choice other than to close cmd and re open and restart adb, not sure what im doing wrong, the device show with adb devices in adb and shell but then says device not found when i try to su in shell lol, fml!

[Q] Problem sideloading kodi.tv

I am having issues. The first time I tried this I thought it was a success as I went through the steps and got the loading screen on the fire tv to come up. I waited for about 10 minutes and then the firetv reset but Kodi did not install.
Now I am trying to do it and when I hit enter after the string to sideload the .apk nothing happens. I get no response in the terminal and it just goes to the next line. I cannot figure this out for the life of me.
I am using terminal on a mac. This method http://sideloadfiretv.com/sideload-apps-amazon-fire-tv-mac/
please help.

Try the additional "-r" option during install ('-r' means reinstall the app, keeping its data).
For e.g.:
Code:
adb install -r kodi.apk

Calibaan said:
Try the additional "-r" option during install ('-r' means reinstall the app, keeping its data).
For e.g.:
Code:
adb install -r kodi.apk
Click to expand...
Click to collapse
Thanks - I am brand new to mac so this is new to me. So basically my string would be
./adb install /Users/YourUserName/Desktop/-r filename.apk
?

seagood3 said:
Thanks - I am brand new to mac so this is new to me. So basically my string would be
./adb install /Users/YourUserName/Desktop/-r filename.apk
?
Click to expand...
Click to collapse
No. The option "-r" must be used before the complete path to the APK file. Have a look:
Code:
./adb install -r /Users/YourUserName/Desktop/filename.apk

Calibaan said:
No. The option "-r" must be used before the complete path to the APK file. Have a look:
Code:
./adb install -r /Users/YourUserName/Desktop/filename.apk
Click to expand...
Click to collapse
I just tried this and got the same issue where when I hit return, it just drops down to the next line. I don't understand this.

seagood3 said:
I just tried this and got the same issue where when I hit return, it just drops down to the next line. I don't understand this.
Click to expand...
Click to collapse
Couldn't you use adbfire on your mac..... it's available from this link http://forum.xda-developers.com/showthread.php?t=2786505 it might make things a little easier...

slackbladder said:
Couldn't you use adbfire on your mac..... it's available from this link http://forum.xda-developers.com/showthread.php?t=2786505 it might make things a little easier...
Click to expand...
Click to collapse
I haven't used that because I am running into all kinds of issues. First I got the "Can't create log file" error. I googled that and see that I need to drag the app onto the desktop or into the applications folder. The problem is when I try to move it I get another error message "The operation can’t be completed because you don’t have permission to access some of the items". I feel like such a newb with this Mac. I have no clue how to troubleshoot.
any help?

Any chance you have a Windows PC connected to your network that you can try? I did this (http://sideloadfiretv.com/sideload-apps-amazon-fire-tv-windows/) and had no issues.
If you can get ES File Explorer onto the FireTV, then you can go to Network/Cloud and add an account, connected it to a Dropbox account, then just download apks and open them from ES File Explorer, you won't need the PC or adb any more.

seagood3 said:
I just tried this and got the same issue where when I hit return, it just drops down to the next line. I don't understand this.
Click to expand...
Click to collapse
Can you even connect to the aTV?
Try some ADB commands to see if ADB does really work:
Code:
adb devices
This should list all via ADB connected devices. If the list is empty you´re not connected.
When your device is connected try some basic shell commands:
Code:
adb shell
This opens a bash shell. Within this shell type
Code:
ls
and the directory content of the actual folder should be listed.
ADB shell can be left with:
Code:
exit
If this isn´t working, check your ADB version you have installed and try to install a newer/other one. I had such an issue once on Windows with an Android tablet which couldn´t be connected with the ADB version I had already installed on my PC so I took another ADB version and it worked. Of course this shouldn´t be but it seems that this can happen.
Another hint might be your problems regarding adbfire. Perhaps your user restrictions prevent ADB from proper working. I´m not firm on MAC´s but I think they support the "sudo" command (explanation: http://en.wikipedia.org/wiki/Sudo). So try your ADB commands again with an additional sudo before similiar like this:
Code:
sudo adb install kodi.apk

I can't figure this out - I am following this (http://sideloadfiretv.com/sideload-apps-amazon-fire-tv-mac/) perfectly and I got it to work the first time but it just didn't complete it for some reason and now every time when I hit enter on the last step nothing happens.
I can't use the adbfire app because of the other issue.
WTF? why isn't the method through terminal working?

seagood3 said:
I can't figure this out - I am following this (http://sideloadfiretv.com/sideload-apps-amazon-fire-tv-mac/) perfectly and I got it to work the first time but it just didn't complete it for some reason and now every time when I hit enter on the last step nothing happens.
I can't use the adbfire app because of the other issue.
WTF? why isn't the method through terminal working?
Click to expand...
Click to collapse
I don't know...on mac you need to use ./ unless you configure it otherwise so to connect I'd type ./adb connect myipaddress
If you are connecting then you have adb working. I use adbfire but here's what I'd do...
I like keeping my adb folder with platform tools on my desktop. Put the apk you want to install in that folder
type "cd" <space> then drag the whole folder into the terminal--hit enter
now type ./adb connect youripaddress--hit enter
if it says connected type ./adb install<space>then drag the apk from inside your adb folder right into the terminal--hit enter
If you did it right nothing will happen instantly. It depends on how fast your connection is. Wait up to 5 minutes I'd say and you'll either get a success message of an error. If it's the latter, post it here.

Did you read my previous topic and tried what I´ve written?
Forget this Howto since it is just a general guideline and it can´t help you with your actual problem since it is more or less a first time installation guideline but you have already had a previous installation which makes the difference. It can also not deal with restrictions on your system side for e.g. if ADB wouldnt´be allowed to access USB.
If you´re sure that your system is not restricted anyway and ADB should work and if you still prefer to work only with this guideline do a factory reset within your FireTV. This should set the box in a state back again where this guideline should work how it is intended.
Or try SPMC from Amazon App Store which would be the easiest way:
http://www.amazon.com/Semperpax-SPMC/dp/B00MK49LL8