Related
Im verry sorry if i posted this in the wrong section or if the answer is allready under my nose, but i tried all other solutions and available versions without any
luck, and i bricked my phone 8 times today wich forced me to re-flash..
This subject is getting discussed in multiple sections and scattered over multiple threads, so again i apoligise if i posted in the wrong section..
The problem is this..
I updated my firmware today officially with KIES to XWJPA..
PDA: I9000XWJPA
PHONE:I9000XXJPP
CSC:I9000XENJP2
Now i really want to keep this original ROM installed, and i want the stock
AOSP lockscreen and extended power menu back i had in my previous custom rom..
All versions i tried on this forum make my phone not boot anymore past the
galaxy s logo..
Now i also found a version inside the "DOC" custom rom thread, but its "deodexed" and thus useless to me..
All i really want is the lockscreen and extended menu for my original rom, could anybody provide this for me??
thx in advance,
ronald
stock lockscreen is here and it's definitly working: http://forum.xda-developers.com/showthread.php?t=784992
if you find the extended power menu for JPO ping me, was unsuccessful so far
XlAfbk said:
stock lockscreen is here and it's definitly working: http://forum.xda-developers.com/showthread.php?t=784992
if you find the extended power menu for JPO ping me, was unsuccessful so far
Click to expand...
Click to collapse
Darkyy's v 4.0 JPO rom has an extended power menu.
Thats what i ment..doesnt matter how many times i try it(5 times so far)...it simple bricks my phone! Wont boot past the "galaxy s" bootup screen!! Read the replys...im not the only one! Lots of ppl complaining about a bricked phone, this one simple doesnt work, and i am a windows programmer, so dont take me for a noob experimenting, sorry...
Please please provide a working version..stock lockscreen and extended power menu is enough..
The best,
Ronald
Sent from my GT-I9000 using XDA App
XlAfbk said:
stock lockscreen is here and it's definitly working: http://forum.xda-developers.com/showthread.php?t=784992
if you find the extended power menu for JPO ping me, was unsuccessful so far
Click to expand...
Click to collapse
As far as i understand the situation at this point, the old "leaked" XWJPA doesnt seem to be the same as the officially realeased "XWJPA"..as i said im a windows programmer and reverser, i have never even looked at linux or java from that point of vieuw...this is all new to me..
All i know, and read that thread FULLY..it doesnt work, tried it 8 times, and needed to flash my phone 8 times after that, i didnt do anything wrong, and if you read the post, lots of other ppl have the eact same problem!
Im seriously concidering flashing a custom deodexed rom, simple because it makes my modding life easyer...yes, i did see the post explaining how to create your own custom lockscreen, including a nice script taking lots of work off your hands...but its still lots of work for somebody who never interested himself in linux,java or mobile platforms..i simple dont have the time to put a few hours into this!
Oh well, still hoping somebody else with experiance in the field can help me out and provide me with a nice `update.zip` for example...
the best,
Ronald
[edit]
PS: Stop refering to other posts stating that they have a working version, after 48 hours of trial and error, i can say with sertainty that
there is no version on this forum wich works ATM! or its "deodexed" and since i got a NON-moded version of the firmware...it doesnt work....OR somebody should tell me how to extract the files from that version...i could replace them with the originals with "root explorer" or something, then that should/could also work
[edit2]
Seriously...help me..i really want this fast, id do it on my own if i hd the time, a few hours would be enough..but i got a girlfriend living with me and stuff, has some problems..i simple dont have the time because of rl-drama...id really appreciate it
+1
You're not the only one.
It doesn't work for me ether with JPA.
I hate the original SGS lockscreen but there is nothing else to do than wait.
And I don't want to use any Rom, I put together my own Rom and it has always worked great, the only thing missing now is the AOSP Lockscreen.
snapper.fishes said:
Darkyy's v 4.0 JPO rom has an extended power menu.
Click to expand...
Click to collapse
it's deodexed though, can't use it
When building an androidinstall.tar from scratch, do I need to include the META-INF file as well?
I will try without it as this build was for a different phone that I extracted and decompressed. I have already separated the apps and placed them in their own /data folder and removed them from the /system folder.
It is an unodexed build so no .odex files were included.
I was looking through other builds I have on hand and noticed no META-INF file, thats the reason for asking.
First error:
[ 127.061609] init: Unable to open persistent property directory /data/property errno: 2
Then a whole mess of kernel errors, possibly due to wrong system...
FIXED! Awaiting boot animation to finish.
Honeycomb boot animation is SO cool looking!
EDIT: NOT fixed, refuses to finish booting. Will work on it more to see if I can get it to boot up.
So far I've gotten to the point where the D-pad and keyboard light but boot animation continues.
Build is Android 3.0 Honeycomb with parts and drivers taken from "system_gingerbread_unodex" listed on sourceforge.
Someone tell me what I've missed here as it's about 80% finished booting and hangs after D-pad lights, animation continues until I pull the battery, about 10 minutes.
Getting an error "cannot execue /system/bin/leds.sh, no such file or directory", even though I made sure to copy it and went back and checked it.
Sorry if this looks like I'm using the forum as a sounding board, but I found an experimental build of Honeycomb for the MSM7201A and wanted to try it out.
Watch me cook the only Kaiser I have left...
All but giving up for now, will dig deeper. I know HC was NEVER meant to run on our Kaisers but it would be fun to see it happen.
Wow you are insane! (I mean that in a good way)
I have a Xoom tablet that runs honeycomb, but can't even imagine it running on our sweet Kaiser. Heck, I don't even like gingerbread: uses too much RAM.
Keep us posted, it sounds like a wonderful experiment.
I'm so close yet so far with it because I'm using more and more of Gingerbread in the build. I even ended up trying to change the build.prop file to accomidate some of the changes in dimensions and clock speeds...
I think I'm about 90% there, just have some issues with the bootanimation restarting, which I may change to the nexus for the smaller size. (HC boot animation is somewhere around 14mb compared to our partly 875kb nexus animation). That could be half the problem because the bootanim uses so much of the ram...
To be continued...
Ok This is a very interesting project
I am from the vogue forum but since my touch broke and the build process is identical I just sort of wander around trying to help with what I know.
So at one time I did a lot of porting and it appears according to your first post this is what you did. What phone did you take the rom from?
If its from the wildfire (I know there was a honeycomb movement in there for a while) I can definitely help because that is where I did most of my porting from
And the META-INF question... When I port I usually trash a bunch of folder straight away ... including META-INF
Good to know there are "floaters" around helping as needed.
BTW, it IS from the Wildfire port. Considering the MSM family is bascally the same, I'm trying to use that as a starting point.
The META-INF file contains certificates and what-not but isn't needed for our phones.
My biggest issue right now, as with any Gingerbread release, is finding drivers for our devices. Froyo drivers won't work because they lack the correct signature. Same as if someone tries to install the HTC flip clock on a plain android without the sense build, it just doesn't work.
I have this project and trying to port the kernel we use to the Raphael (Touch pro/Fuze), which is a major task in and of itself. I tried HaRet before with the Kaiser and I jus HATE it.
Biggest issue with the Fuze right now is to get it CID unlocked so I can try installing the kernel to NAND and go from there.
With that being said, I don't know what kind of progress I'll be making with HC in the near future, if any.
Ok, I went back and restarted the project from scratch. Someone else ported the bootanimtion and different aspects of HC to a Froyo port on the Xperia X1 forum.
I recompiled everything at first, moving the "app" folder inside a new folder named "data", since our NAND constraints limit the build size to under 102mb for /system.
Once again I am stuck at the boot animation. It will go full-speed for a minute then restart and run slow. The only parts taken from the X1 were the app folder and media/bootanimation.zip
I'll dig a little deeper, maybe ask around the X1 forum for help.
Would be nice to finally figure this out though.
Hi PoXFreak. It seems like you're a very good dev. Could i help you somehow or could you link me to somewhere where i could get all the tools for rom and kernel building. Im a C++ learner, i've written a few apps, but only big thing i've done in android is installed sdk and modified a rom to have apps i need after install. I'd rly like to improve our kaisers.
P.S. dou you put anynthing compilled by urself in android rom (without kernel)? And where are the drivers located? system/lib/modules/[kernelversion]/ or system/lib/modules/ ???
zxxxy said:
Hi PoXFreak. It seems like you're a very good dev. Could i help you somehow or could you link me to somewhere where i could get all the tools for rom and kernel building. Im a C++ learner, i've written a few apps, but only big thing i've done in android is installed sdk and modified a rom to have apps i need after install. I'd rly like to improve our kaisers.
P.S. dou you put anynthing compilled by urself in android rom (without kernel)? And where are the drivers located? system/lib/modules/[kernelversion]/ or system/lib/modules/ ???
Click to expand...
Click to collapse
The .so files go into /system/lib/modules/(kernelversion).
Sent from my Android on HTC Kaiser using XDA App
I have yet to make a complete working build from my work so no, I have nothing "new" to contribute to any android builds. All I'm doing is combining and rearranging/replacing/removing files already in builds.
To date, I have not had the time to work on this. I would like to be able to devote more time but I have too much on my plate already. Not to say I'm dropping the ball, just putting it on the rack for awhile.
Hello all...yes, I am a noob! I recently discovered the joys of rooting my Evo4g...talk about breating new life into outdated technology! Anyway I have been flashing roms for about the past month (drives the wife nuts, always tinkering with my EVO!!) and I have learned how great theming can be - I love the look of ICS and JB but I prefer to not sacrifice the built in features (4G, FFC...etc) that have not been developed for the newer systems. I finally settled on DroidGTR-Turbo (wonderful rom for GB, btw!) and got all my apps reinstalled and convinced myself that the time had come to finally just enjoy my EVO instead of playing with it when...(GASP!)...Microsoft released XBox SmartGlass for Android!!! I had been waiting with eager anticipation for weeks since I heard about it so I went to download it and (GASP! again) "For Android 4.0 or higher"!!! I googled for ways to get it to work, wiped phone and installed on a ICS rom to get the apk reinstalled GB and even found a hacked apk file but I got a parsing error when I tried to install both. So now I am running MazWoz-EVO JB rom (LOVELOVELOVE it btw! Great Job) and as an added surprise I now have shutdown animation, which I never considered before. Here is my issue (after that long winded yet hopefully entertaining introduction to meself!) - and it is in no means a "deal breaker" issue - the shutdown animation uses the bootanimation.zip and I would like to know what file to edit to use a different zip for shutdown than for startup - if that is even possible at this stage in developement. Also, it seems after about two weeks of googling and researching that bootsounds in ICS and JB are not possible at this point. Is this indeed the case or did I miss something somewhere? And of course what would make both of those (very minor) issues completely null and void to me - has anyone found a way to get SmartGlass to install and run on GB?
Thanks for your time!!
Not sure where it is on Rom your running. But using WinZip, or 7-Zip you can check to see if it's in Data - Local. It will be named downanimation.zip .
This isn't another one of those 'can somebody port Sense' threads.
Please note that this thread is for developer-oriented discussion. If you don't have anything to say to help development, please refrain from posting here.
Also note that ideas are welcome. Just check if the idea you're about to post has already been posted by somebody else.
Right now, it's just multiple people working on this. No team, just individuals.
As of the last edit of this post, there has been little to no progress:
I'm constantly working on builds. The current, and the only goal I'll be striving towards as of now is using a T-Mo HTC One X ROM in combination with RaymanFX's CM10.1 RC2 build.
XDA RC @abcdjdj has reported that he has fixed a lot of errors in his build, and is now stuck at the bootanimation. If you can help him in any way, here is what's wrong with his build. He's using FXP's CM9 as a base and a 4.0 HTC One X with Sense 4 ROM as a port.
The OP will constantly be updated with any progress anyone makes.
We're currently using this XDA thread to help us port the ROM.
--------------------------------
Here's everything I have to share on my build:
PORT: HTC One X, T-Mobile Edition| Android 4.2.2
BASE: Sony Xperia S, nozomi | Android 4.2.2
------------------------
ITesters needed. If you can work through adb commands and can provide me with logcats, please leave a post about it in the thread.
And finally, a note to anyone that may be cursing me for working so very slow (because I admit, this is very slow):
Please understand that all this isn't easy for me. I have painfully slow internet, making each download at least one hour, and thus a pain. My time on this project is limited every day, so progress is slow.
Reserved.
someone755 said:
Okay, so this is the work that has already been done and some of the mysteries that puzzle me right now:
I've edited the CM9 kernel's ramdisk, like stated in the tutorial I'm using (see post 1). As of now, the kernel itself is broken and even if the ROM was complete, not even the booting would work. (Well, booting works as far as showing the boot logo (the green FXP one) goes. But the LED notification light for entering recovery doesn't light. Bootloop over and over...)
Many of the lib files intended to be copied from one lib folder to the other are missing on our Nozomis... My question is, what are the consequences...?
My main issue here is that the zip won't flash. The recovery (no matter which I choose) just returns an 'ERROR' and refuses to flash the file...
Another question would be how to repack an .elf kernel into a boot.img. Because now, I'm trying with letting the CM9 kernel in the zip (since it is an .img) and then flash the modified .elf kernel that I repacked with Flashtool. Inefficient, but at least there's a way.
So currently, the priority list would be:
1.Get zip to flash
2.Fix kernel
...Not necessarily in that order. We could fix the kernel first, but there isn't much gain to it if the ROM zip can't even be flashed to test if it truly works...
Click to expand...
Click to collapse
Bro, it may be possible to get Sense on our devices. Even I have been working on getting Sense booted on our device. My status:-
PORTED FROM - HTC ONE X
BASE - FXP 215 CM9
STATUS - Gets past kernel and even loads bootanimation. Fixed many errors in the logcat. Gets stuck at bootanimation and even displays a message saying that System is not responding, would you like to close it.
I couldn't manage to fix any more errors in the logcat so I gave up but you have rekindled my spirit to get Sense booting on out device. I will upload my rom soon along with the logcat.
Cheers,
abcdjdj
Wow, you actually got the thing to boot?
The only question is how did you manage that based off of a tegra CPU? Would be very interested in seeing that...
On a not-so-very related note, your port was of ICS and Sense 4 , correct?
Am I the only one around here that favors old software?
someone755 said:
Wow, you actually got the thing to boot?
The only question is how did you manage that based off of a tegra CPU? Would be very interested in seeing that...
On a not-so-very related note, your port was of ICS and Sense 4 , correct?
Am I the only one around here that favors old software?
Click to expand...
Click to collapse
Not fully booting but I think close to booting. I followed the guide mentioned by you in the OP and one by one eliminated all errors that I could eliminate. I had been working on Sense for around a month during my school holidays but now I am not getting any free time. And yes it is Sense 4 (Android 4.0.4).
Sent from my LT26i using xda app-developers app
But isn't the Tegra3 completely different than our FUJI board?
Especially the graphics, those must be out of control on your ROM...
If I were you, I'd at least take the AT&T version of the HOX.
Oh yeah, I forgot to ask: is it the same if I try and port from a MSM8260 board (the same as the Xperia) and the later S4 Qualcomm versions (used in the Xperia T, AT&T One X etc.)? Because porting from a CDMA phone (HTC Rezound) seems to make the work harder...
Thankfully, my summer holidays have just begun, so I have plenty of free time (that's also the reason I started my project).
P.S.
Yeah, maybe that's exactly what I should do. Ditch the CDMA phone and start with the Snapdragon S4 One X!
I would prefer Sense 3.x, but oh well, at least Sense4 is also Sense
http://www.xda-developers.com/android/sense-4-ported-to-sony-xperia-devices/
I just found this. It's not even that old...
Anyways, I've been thinking if the devs of this would be able to help us.
This development stuff gets boring pretty quick when you do it for the 10th time
@samuel2706, could you give these guys a little hand?
But he's a HTC Dev... Wouldn't we need something more like a nexus or better yet a Xperia developer?
someone755 said:
But he's a HTC Dev... Wouldn't we need something more like a nexus or better yet a Xperia developer?
Click to expand...
Click to collapse
Yes,, maybe, but he also could give a little help. Can't he?
Sent From my LT26i using Tapatalk 4
Contact the guy who did this http://forum.xda-developers.com/showthread.php?t=2184706
Well, I thought I'd make this thread so that devs could help each other to actually work together and create a working Sense ROM. So naturally, all help is welcome from anyone.
Anyways, I'm on my way to finishing yet another try, this time with the AT&T One X. Fingers crossed that it at least makes it to the bootanimation.
EDIT: I see that the easiest way to get Gapps is with including the default /data folder from the original HTC ROM (with vending, youtube etc.). But I have to add that to the updater-script. So, I want to ask, is /dev/block/mmcblk0p14 the data partition on the Nozomi?
What's happening?
samuel2706 said:
What's happening?
Click to expand...
Click to collapse
Hi,
I am porting [or trying to port] Sense 4 from HTC One X to Xperia S. I used FXP 214 CM9 as a base. I followed this guide - http://forum.xda-developers.com/showthread.php?t=2245786
Then I fixed as many errors as I could by checking the logcat and got it till the Bootanimation. But now I need help to get it to boot. So, I have attached the logcat from my latest build.
Thanks for your help,
abcdjdj
Maybe copying a few more files could help. Maybe act like your xperia is a HTC device? http://forum.xda-developers.com/showthread.php?t=1222746
Could be worth a try and play with this copying a bit...
Seems to be failing at dalvik; very strange, it doesn't show any major errors on first glance however I'll take a longer look at when I can, however I can link you to this thread that may help you in the meantime Porting
What about this one? http://forum.xda-developers.com/showthread.php?t=2276871
Nice and automated, but the question is, will it work?
I'm trying it with the HOX, just need to wait for it to copy to the phone...
All this seems like a big race -- who will get it working first? Hyped!
Kinda makes me wish I still had my xperia S I could have given this a real good go at; but instead I have a galaxy s4, so it's going to be mostly logcats and such I can help with, I don't like blind building things; made that mistake before.
A blind build is better than no build. Unless it makes bricks...
Thanks a lot for helping out.
Though I'll never understand how a pro HTC dev can go to Sony and then Samsung. ;P
I just hope THIS time my kernel will boot... Cause if it doesn't ... [censored]...
EDIT: Okay, [censored] is happening... Why can't I make this zip flash? I've done it a million times, but all I get is ERROR... ;-;
unfotunatly, i'm not a dev. but i really like the idea. specially if considering porting htc one sense version to our nozomi. i think it would fit like a glove
Keep the trouble shooting questions for each specific ROM or Kernel to THEIR threads. So that way Devs can be made aware of any errors to be able to work on, if need be, and for when people are searching for solutions to their problems the answers won't be scattered around. Consolidation makes everything easier!
What's your build? What are you loving about it? Any MOD recommendations?
Mine:
Viper10 ROM by TeamVenom
ElementalX Kernel
&
A.R.I.S.E
Sound Systems™ audio MOD
I'm a first time rooter (introduced to it by my fiance) and aspiring developer. I am going back to school to get that ball rolling. I'm socially awkward whilst being a social butterfly (once I'm out of my shell). The A.R.I.S.E team and TeamVenom have helped me to come out of that shell here on XDA so I'm ready to get socializing and talk all things root! However, I don't want to blow up their threads with unrelated posts...and so I've created this thread - so let's have at it and share ideas, opinions, and have fun! Remember to keep issue/ questions related to each ROM, Kernel, MOD etc. posted ON THEIR threads! So please include a link to their XDA thread when sharing what you've got.
Be kind and respectful. And have fun!
(Still need assistance with getting your HTC 10 rooted? Check This Guide out!)
https://youtu.be/1iAYhQsQhSY
Mine are
LeeDrOiD10 ROM
either with the build-in
~clumsy~ Kernel
or
ElementalX Kernel
No sound mods as the audio boost of LeeDrOiD is workin' just fine with the build in DACs
Used Viper for a long time and it is a great ROM. In fact I went to LeeDrOiD10 cause the tweaks on Viper10 are just so many, and most of them I've never used at all. On LeeDrOiD there are just a few tweaks, where all those I need and use are present.
Cheers
Only Cool Kids Reply to Their Empty Threads
EDIT: Lol got a post while taking 10 years to write this one...so it doesn't appear as though I was my own first response...but if I wrote like a normal person, I would have been.
TL;DR - Zip below will get rid of red message during boot, REQUIRES S/OFF, if you choose to flash this I'm NOT responsible for bricked phones, this zip file works for US Unlocked HTC 10 phones - but I'll rewrite the files inside to match your CID if you need me to, not originally my work and I don't know who's it is...sorry!
-Rename the zip file 2PS6IMG.zip & place it in the external SD card
-Boot down to download mode and if it's all groovy there will be a message at the bottom outlining that it found the "2PS6IMG" zip file and will tell you to press VolUp to proceed with the flash or VolDwn to continue to the normal download mode screen options
NOTE: if your screen doesn't display that initial message at the bottom and just goes to the normal download mode options then you've named the zip file wrong. Make sure that you didn't end up with 2PS6IMG.zip.zip during the renaming process - it HAS to read 2PS6IMG.zip or download mode will not see it as it is scanning for that name exclusively!
- If you got the message go ahead and hit volume up and, when prompted at the end, hit the power button. If you're phone boots down immediately after hitting the volume up button DON'T FREAK and leave it be. It'll kick back up and finish it's thing.
- Reboot and enjoy! (First boot up may take longer than you're comfortable with, that's normal chill for a moment and it'll all work out)
(First to reply to my own thread, crazy stuff happening here...watch out! )
Never understood why the TL;DR is put at the bottom. I know I write novels...I love words but I feel the TL;DR is more thoughtful to place at the top...so you don't have to wade through the overwhelmingly copious amounts of my words to find out there was a TL;DR option. Always thinking of you :angel: however, surely there exists an individual who not only continues and reads my posts in their entirety, but is as entertained reading it as I am writing it!
.............
Anyway, since this is meant to be a thread in which we share fun rooting tweaks and whatnot, I thought I'd go ahead and add this zip file. If you aren't a fan of the red message during the boot up that appears after you've successfully rooted - I've got your solution! I do have to apologize... I'm not sure who the original creator is. My fiance sent the file to me through Bluetooth and I rewrote a couple lines in the file so it would work with my CID. I tried to find the correct individual or thread to link in order to give them the proper credit, but there were a few posts for it so I'm unsure who it is. Just know I'm not trying to claim this for my own... just sharing the love :victory:
MAKE SURE YOU ARE S/OFF BEFORE DOING THIS! YOU'RE FLASHING THIS ON YOUR OWN ACCORD, I'M NOT RESPONSIBLE FOR ANY SOFTWARE/ HARDWARE FAILINGS
This is for the US Unlocked phones. So if you're not US Unlocked, but you want up in this sexy zip action, let me know and I can rewrite the file for you. The CID just needs to be rewritten to match the one on your phone. As a precaution I also rewrote the "mainver" line. It had the original 1.21.531.1 (T-Mobile's current software number) to the updated 1.80.617.1 (the current software number for US Unlocked). I wanted it all lined up perfectly, just in case, however IDK if you need to rewrite the "mainver" live in that text file my phone is fully functional after the rewrite and flash so I'm confident that I took the right steps. I posted what I've got going on for my custom ROM/ Kernel in the OP, if that's important for you to know. I've got the instructions above in TL;DR - no need to repeat. Let me know if you have any questions!
:highfive:
5m4r7ph0n36uru said:
Mine are
LeeDrOiD10 ROM
either with the build-in
~clumsy~ Kernel
or
ElementalX Kernel
No sound mods as the audio boost of LeeDrOiD is workin' just fine with the build in DACs
Used Viper for a long time and it is a great ROM. In fact I went to LeeDrOiD10 cause the tweaks on Viper10 are just so many, and most of them I've never used at all. On LeeDrOiD there are just a few tweaks, where all those I need and use are present.
Cheers
Click to expand...
Click to collapse
Thank you for the reply! I haven't checked LeeDrOiD10 out personally, but I saw it on my fiances phone when he got uber frustrated at a camera defect post viper update. The V10 ROM update caused our kernel to be temporarily incompatible...so he temporarily ditched V10 and tried LeeDrOiD10.
He was saying the same things as you in regards to fewer customisation's. And hebmade mention of it being a little more user friendly. But, ultimately, he returned to V10
EDIT:@5m4r7ph0n36uru what exactly does the LeeDrOiD10 ROM offer in terms of the sound boost? An equalizer? Or a little more than that. I didn't check that feature out. I didn't know it was one. My other half may have known though. We love the crazy amounts of tweaking you can do with Viper4Android in the A.R.I.S.E. MOD and all their tweak.prop files/ profiles that we can load up!
Being a spectator of LeeDrOiD10 was sufficient enough for me...only because I know myself, and I LOVE having as many options and open doors, in regards to messing around with my phone, as possible. Tis more dangerous waters to tread that way...but that's all the fun! And I'm confident enough in myself to be able to recover from most things. After all XDA has strong support to offer!
Yeah I know and it always has been fun changing nearly every detail in a ROMs behavior as it is possible on Viper10. But in fact I guess I'm maturing from this phase in my live where modding was the one and only, as we'd say in germany.
In fact I'm getting older and less fascinated by all those features. Maybe it'll come a time when I'll again become fascinated by modding and tuning every tiny bit of a ROM, but at the moment I really just need some basics.
Sent from my HTC 10 using XDA Labs
5m4r7ph0n36uru said:
Yeah I know and it always has been fun changing nearly every detail in a ROMs behavior as it is possible on Viper10. But in fact I guess I'm maturing from this phase in my live where modding was the one and only, as we'd say in germany.
In fact I'm getting older and less fascinated by all those features. Maybe it'll come a time when I'll again become fascinated by modding and tuning every tiny bit of a ROM, but at the moment I really just need some basics.
Sent from my HTC 10 using XDA Labs
Click to expand...
Click to collapse
There's a flavor for everyone! And our taste buds change over time for sure. So long as you're happy with your phone and its features, that's all that matters!