I want to install a custom kernel on my Rogers Galaxy S3. I am currently running a rooted STOCK ROM. Which means I am still running Android 4.1.1.
I have been looking at this kernel here: http://forum.xda-developers.com/show....php?t=1756776 (I am using the Touchwiz JELLYBEAN version)
Here are my questions
1) I shouldn't have any issue using my device with this kernel right? I mean it's outlined pretty clearly but I don't want a nice $600 paperweight. I am running 4.1.1 on my device using a rooted stock ROM. (touchwiz)
2) WARNING: This kernel has updated WIFI and Bluetooth drivers. If you are going back to stock, you need to get those drivers back or those 2 devices will not work. Simply flashing a kernel will not do it unless it also flashs back those drivers (they are in "/system/lib/modules" folder).
What exactly does this mean? If I do a CWMR and restore back to the previous kernel, what will happen? What happens when I want to revert my phone back to stock? Do I just use Odin3 and load the stock S3 ROM and the kernel and drivers will be installed? Or do I have to do a special process to get WiFi and Bluetooth working again?
Also, this won't trip the flash counter will it?
I really appreciate your help guys, thanks so much .
Closed as per OP.
Related
I was wondering how would I do this. I wanted to flash JediMaster X but im rooted on 4.1.2 Jedi X. How would i go about updating to stock 4.3 without installing knox so i can get the working bootloader then update to Jedi Master X ?
I would prefer if the stock ROM was rooted already and knox removed. Anyway have any links.
Has anyone done this process ?
Re: Upgrading to 4.3 from stock 4.1.2
naruto.ninjakid said:
I was wondering how would I do this. I wanted to flash JediMaster X but im rooted on 4.1.2 Jedi X. How would i go about updating to stock 4.3 without installing knox so i can get the working bootloader then update to Jedi Master X ?
I would prefer if the stock ROM was rooted already and knox removed. Anyway have any links.
Has anyone done this process ?
Click to expand...
Click to collapse
Hi, even though you are on stock 4.1.2, remember: you have root privileges now. You can flash any ROM designed/built for your particular variant of the Note 2. That simply means stick with flashing ROM that match your device's model number.
Next, I flashed JediMasterX this morning. It is built from stock firmware Android 4.3 for the Note2 so you can flash this ROM, if there's a build for your variant. You don't need to flash the actual firmware to upgrade to 4.3 ROM. All builds in the forum come from source code, which means there is a base design for each kind of phone, but Android is Android and it follows certain predetermined rules.
One thing you need to do is read the OP to whichever ROM it is you are thinking about flashing. The ROM chef is going to place some very important information on the first page where they present their ROM. It is much advised that you follow those guidelines down to the letter. For instance, you want to flash JediMasterX, right? Did you know that the OP mentions that if you haven't already updated to 4.3, (BTW...there are links in the forums for each carrier to download the stock firmware and they're already root and you don't have Knox to worry about!) that you should flash a particular kernel after flashing the ROM. You'll even find a link to the stock 4.3 modem, which is necessary for providing a data connection. That is less necessary than flashing the kernel and the OP explains why.
I hope this has helped. Make sure you have your custom recovery set-up and that you already have a Nandroid backup of your root stock firmware or another ROM you have recently flashed. Always keep a backup, more than one is even better!
Happy Flashing!
tinydynamite00
tinydynamite00 said:
Hi, even though you are on stock 4.1.2, remember: you have root privileges now. You can flash any ROM designed/built for your particular variant of the Note 2. That simply means stick with flashing ROM that match your device's model number.
Next, I flashed JediMasterX this morning. It is built from stock firmware Android 4.3 for the Note2 so you can flash this ROM, if there's a build for your variant. You don't need to flash the actual firmware to upgrade to 4.3 ROM. All builds in the forum come from source code, which means there is a base design for each kind of phone, but Android is Android and it follows certain predetermined rules.
One thing you need to do is read the OP to whichever ROM it is you are thinking about flashing. The ROM chef is going to place some very important information on the first page where they present their ROM. It is much advised that you follow those guidelines down to the letter. For instance, you want to flash JediMasterX, right? Did you know that the OP mentions that if you haven't already updated to 4.3, (BTW...there are links in the forums for each carrier to download the stock firmware and they're already root and you don't have Knox to worry about!) that you should flash a particular kernel after flashing the ROM. You'll even find a link to the stock 4.3 modem, which is necessary for providing a data connection. That is less necessary than flashing the kernel and the OP explains why.
I hope this has helped. Make sure you have your custom recovery set-up and that you already have a Nandroid backup of your root stock firmware or another ROM you have recently flashed. Always keep a backup, more than one is even better!
Happy Flashing!
tinydynamite00
Click to expand...
Click to collapse
Yes I want to flash JediMaster X but I heard that if i don't have the stock bootloader WiFi will be dropping in and out. Support for devil kernel in V2 is being dropped or something (so i wanted a solution in which i don't have to flash devil kernel) so I need to have the stock bootloader to have stable connection. Yeah I was just looking for the simplest process to get everything working on JediMasterX 4.3
naruto.ninjakid said:
Yes I want to flash JediMaster X but I heard that if i don't have the stock bootloader WiFi will be dropping in and out. Support for devil kernel in V2 is being dropped or something (so i wanted a solution in which i don't have to flash devil kernel) so I need to have the stock bootloader to have stable connection. Yeah I was just looking for the simplest process to get everything working on JediMasterX 4.3
Click to expand...
Click to collapse
I totally understand you. And that's where that kernel I mentioned comes in. It's called the dual-boot or Devil's kernel by @DerTeufel You need to either flash that kernel after flashing the ROM via the Aroma installer. Reboot back into recovery and flash the kernel OR flash the bootloader patch provided by another senior contributor in the forum. That link is somewhere in the OP and you have this option. Download and flash the stock root 4.3 firmware -- it already is Knox free -- for your device. Then flash your downloaded JediMasterX ROM and you won't need to worry about flashing the kernel.
tinydynamite00 said:
Hi, even though you are on stock 4.1.2, remember: you have root privileges now. You can flash any ROM designed/built for your particular variant of the Note 2. That simply means stick with flashing ROM that match your device's model number.
Next, I flashed JediMasterX this morning. It is built from stock firmware Android 4.3 for the Note2 so you can flash this ROM, if there's a build for your variant. You don't need to flash the actual firmware to upgrade to 4.3 ROM. All builds in the forum come from source code, which means there is a base design for each kind of phone, but Android is Android and it follows certain predetermined rules.
One thing you need to do is read the OP to whichever ROM it is you are thinking about flashing. The ROM chef is going to place some very important information on the first page where they present their ROM. It is much advised that you follow those guidelines down to the letter. For instance, you want to flash JediMasterX, right? Did you know that the OP mentions that if you haven't already updated to 4.3, (BTW...there are links in the forums for each carrier to download the stock firmware and they're already root and you don't have Knox to worry about!) that you should flash a particular kernel after flashing the ROM. You'll even find a link to the stock 4.3 modem, which is necessary for providing a data connection. That is less necessary than flashing the kernel and the OP explains why.
I hope this has helped. Make sure you have your custom recovery set-up and that you already have a Nandroid backup of your root stock firmware or another ROM you have recently flashed. Always keep a backup, more than one is even better!
Happy Flashing!
tinydynamite00
Click to expand...
Click to collapse
tinydynamite00 said:
I totally understand you. And that's where that kernel I mentioned comes in. It's called the dual-boot or Devil's kernel by @DerTeufel You need to either flash that kernel after flashing the ROM via the Aroma installer. Reboot back into recovery and flash the kernel OR flash the bootloader patch provided by another senior contributor in the forum. That link is somewhere in the OP and you have this option. Download and flash the stock root 4.3 firmware -- it already is Knox free -- for your device. Then flash your downloaded JediMasterX ROM and you won't need to worry about flashing the kernel.
Click to expand...
Click to collapse
Ok thanks I will go the stock method way. After flashing stock do i ed to wipe data and cache ? Also is the best way to flash stock to use PC odin or mobile odin ?
naruto.ninjakid said:
Yes I want to flash JediMaster X but I heard that if i don't have the stock bootloader WiFi will be dropping in and out. Support for devil kernel in V2 is being dropped or something (so i wanted a solution in which i don't have to flash devil kernel) so I need to have the stock bootloader to have stable connection. Yeah I was just looking for the simplest process to get everything working on JediMasterX 4.3
Click to expand...
Click to collapse
I forgot to mention one other thing. I know that JediMasterX was shared with us earlier in December. One thing of interest, and this is solely for your information...don't go trying it until you're more comfortable with flashing and more importantly recovery! The N7105 is compatible with the T889 and that allows us to flash ROM built for our respective variants. The Devil's kernel was built for the N7105 originally. And I just downloaded a pretty updated -- as of this month -- version of the kernel yesterday. I did read in @DerTeufel's OP for the Devil's kernel that he wouldn't be supporting any requests for changes to the kernel. But the kernel is solid. Has been for quite some time!
Sorry it's taken me long to reply. Wouldn't you know my phones are both drained and I hadn't turned on my computer yet. Anyway, important thing is to read, read, read. I know you might get bored clicking through pages, but it's really cool when you find updates to certain ROM you like buried in those pages instead of posted on the main page. Or you find tips to a having a better experience on the ROM you happen to be on by using a mod listed in a forum. And you can learn a whole lot from everyone in these forums, but reading through the forums will teach you things about root, what you can and cannot do, that no single person can.
Hope this helped! Have fun flashing!
tinydynamite00
---------- Post added at 12:14 PM ---------- Previous post was at 12:02 PM ----------
naruto.ninjakid said:
Ok thanks I will go the stock method way. After flashing stock do i ed to wipe data and cache ? Also is the best way to flash stock to use PC odin or mobile odin ?
Click to expand...
Click to collapse
Yea, you're going to download and flash through desktop Odin the stock root 4.3 firmware. You download the zip, unzip and place the .md5 file in PDA of Odin. You'll then need to flash a recovery image through Odin as well so your recovery partition will be ready to flash into recovery and then backup the stock root firmware. Keep it in case you want to go back. And always do a complete wipe in recovery for a clean install of any ROM you flash.
Computer is super slow today. ARgH! lol
tinydynamite00
Here you go
naruto.ninjakid said:
I was wondering how would I do this. I wanted to flash JediMaster X but im rooted on 4.1.2 Jedi X. How would i go about updating to stock 4.3 without installing knox so i can get the working bootloader then update to Jedi Master X ?
I would prefer if the stock ROM was rooted already and knox removed. Anyway have any links.
Has anyone done this process ?
Click to expand...
Click to collapse
I know what you mean and I'm using the official ROM now without Knox
Step 1: Root your phone
Step 2: Install Titanium Backup pro (u can download the APK from apkmania or any other site)
Step 3: Find the apps in the screenshot from Chrome to Mobile life
Step 4: back up each one of them (in case if u need Knox later)
Step 5: uninstall
Step 6: have fun, your phone is Knox free
Hit the thanks button if my post helped you please.
So a couple of days ago I got a GS3 running the OTA stock 4.3. I wasn't sure if I wanted to use it because I find Touch Wiz kind of clunky. So I decided I would try out Cyanogenmod. I installed it via their new handy installer (as the sprint GS3 is one of the compatible devices). All went well and I got Cyanogenmod 10.2 running smoothly. Now I want to activate the device, but apparently you can't activate a rooted device on sprint. So now i need to get it back to stock 4.3 and I can only seem to find solutions to his problem for devices that have not gotten the 4.3 OTA update and are still running 4.1.2. On the Cyanogenmod installer guide says:
You may perform a full backup from recovery, after flashing recovery (you will have to do this manually, at the moment) and then copy it off the device, if you don't have an external sdcard. If you've already run the installer, you will have to find stock images and flash them using fastboot or Odin.
Click to expand...
Click to collapse
My problem Is I can't locate any stock 4.3 images with which to try this. If I can get my hands on a stock 4.3 image, would the process be just going into the bootloader and using Odin to flash the 4.3 image?
Can anyone help me out?
You only need to be on a stock tw rom, even if you are rooted it should activate. There are a couple in the development section.
metalfan78 said:
You only need to be on a stock tw rom, even if you are rooted it should activate. There are a couple in the development section.
Click to expand...
Click to collapse
I see, do you know of any any good 4.3 based tw roms? All the ones I'm finding are based on 4.1. Also, do I need to do anything special to flash from Cyanogenmod 10.2 to a touchwiz rom (as Cyanogenmod is AOSP)? I already have ClockworkMod recovery installed.
Nothing special, flash like anything else
http://forum.xda-developers.com/showthread.php?t=2541900
[STOCK ROM] Stock 4.3 MK3 ROM [ROOTED/UNROOTED]
I have a quick question. I am on a stock rooted 4.1.1 att sgs3. I was curious if i flashed this rom/kernal,[ROM/KERNEL][4.4.2] Quantum 3.54 & QuantumKernel 3/7, would i be able to go back to my stock rooted rom if I wanted to? Thanks in advance.
Looks like you are trying to flash a custom ROM. Don't know much about these particular ROMs you mentioned but you need to your research thoroughly on custom ROMs before flashing. You may know most Custom ROMs don't come with their own bootloaders but still have to rely on a manufacturer's bootloader to run. You should, therefore, avoid any ROM that may update your bootloader because this is the only way that you would not be able to return to your previous stock version. If the ROM simply updates the system without mucking with your bootloader, there is no reason why you may not be able to return to stock.
I had an AT&T SG3 on stock 4.1.1 and I was able to flash KitKat (4.4) based CM11 and return to stock 4.1.1 without any hitches. Finally, whilst you are still on stock 4.1.1 I would suggest you take advantage of all the flexibilities offered by this Android version especially free unlocking before you begin tinkering with firmware.
So as long as I dont update my bootloader, I should be fine on going back to stock rooted 4.1.1? Thanks for the info!!
So how do i know what roms dont mess with the bootloader?
Most ROMS do not include an aboot file. I have flashed CM11, Validus, Slim, and Cyanfox and none of these altered the bootloader.
I suggest that you find a ROM you like, unzip the file, and look at the updater script to determine which bootloaders are required to install the ROM on your phone.
Ok guys, thanks for the tips. I just didn't want to get stuck on a firmware where i could not have root anymore or go back to a stock rooted rom.
Hey all. I am fairly inexperienced when it comes to rooting, though I have done a few succesfully in the past. I currently have the newest version of TWRP installed on my Samsung I747M. The I747M I have is not from one of the major carriers, but as far as I am aware, the phone is factory network unlocked. Carrier is GCI, in Alaska.
I currently have a 4.4.2 Touchwiz Rom installed and started having problems after I attempted to flash the ROM Dandroid, which is 4.3 (http://forum.xda-developers.com/showthread.php?t=2121506). I had created a backup using TWRP before flashing the ROM and reverted back once I noticed the problem.
The main issue I am experiencing at this time is the Baseband Version, IMEI, and other information related to the modem is showing "Unknown" and features such as wifi will not toggle on.
I had also attempted to flash the most current version of the modem that I was able to find thru Odin. Odin showed the flash as successful. The version I flashed to the phone was I747MUMUEND3: modem_CWM_I747MUMUEND3.zip - 18.80 MB - April 3rd, 2014 (http://forum.xda-developers.com/showthread.php?t=1831898)
At this point, I can still get into recovery, download modem and I am able to boot up the phone and access most all functions. The next step I was going to try was going to be to flash back to stock firmware from sammobile's website (Was using to use the Roger's version of 4.4.2), though I don't want to cause more issues than I can handle or resolve thru software.
Any advice on how to proceed would be greatly appreciated or even just how to get the modem/wifi features functional again would be helpful. I'm just as happy staying on my current ROM at this point if I can get the phone fully functional again.
It's possible that the rom is not compatible with the kk modem and bootloader.
Flash cm12.1 to see if your imei comes back.
audit13 said:
It's possible that the rom is not compatible with the kk modem and bootloader.
Flash cm12.1 to see if your imei comes back.
Click to expand...
Click to collapse
Forgot to mention, this is something I did try. I attempted to flash Cyanogen Mod 12.1 (Download: cm-12.1-20151017-NIGHTLY-d2att.zip (286.76 MB) ) and most recent nightly build & the most recent stable release (CM11) (Download: cm-11-20140210-SNAPSHOT-M3-d2att.zip (194.37 MB) ). When flashing these, I transferred the downloaded ZIP file to the internal storage of the phone in the root directory and attempted to run an install from TWRP. Both installs failed.
Since the phone is an i747m, I recommend flashing back to stock using Odin 3.07 and stock ROM file from here: http://www.sammobile.com/firmwares/database/SGH-I747M/
The i747m versions are interchangeable between Rogers, Telus, and Bell.
After flashing back to stock, install TWRP using Odin 3007 from here: https://dl.twrp.me/d2att/twrp-2.8.7.0-d2att.img.tar
Create a nandroid backup using TWRP and then try to flash a custom ROM again.
audit13 said:
Since the phone is an i747m, I recommend flashing back to stock using Odin 3.07 and stock ROM file from here: URL REMOVED FROM QUOTE DUE TO NEW USER LIMITATIONS
The i747m versions are interchangeable between Rogers, Telus, and Bell.
After flashing back to stock, install TWRP using Odin 3007 from here: URL REMOVED FROM QUOTE DUE TO NEW USER LIMITATIONS
Create a nandroid backup using TWRP and then try to flash a custom ROM again.
Click to expand...
Click to collapse
I'll give that a shot when I get home. Stock firmware was one of my next thoughts. I have it downloading at the measly 15 Kbps offered for free from sammobile so hopefully should be done by the time I get home & update this thread with any progress.
Another possibility is a custom kernel, if you are wishing to stay with TouchWiz and not wanting to upgrade your bootloader and modem past 4.3.
Some of the 4.4.2 TW roms will run on 4.3 bootloader and modems using one of ibuddler's kernels or ktoonsez's TW kernel. This was discussed most in the Likewise ROM thread and links to the various versions of ibuddler's kernel may be found there. It may have also been discussed in TMS3KK thread. The ktoonsez kernel can be found in its own thread.
But, you may really want to consider a newer ROM in order to change to something with the stagefright fixes. I think any of these may require the latest 4.4.2 bootloader and modem. (What say you @audit13?)
dawgdoc said:
Another possibility is a custom kernel, if you are wishing to stay with TouchWiz and not wanting to upgrade your bootloader and modem past 4.3.
Some of the 4.4.2 TW roms will run on 4.3 bootloader and modems using one of ibuddler's kernels or ktoonsez's TW kernel. This was discussed most in the "http://forum.xda-developers.com/showthread.php?t=2725192"Likewise ROM thread and links to the various versions of ibuddler's kernel may be found there. It may have also been discussed in http://forum.xda-developers.com/showthread.php?t=2725750" TMS3KK thread. The http://forum.xda-developers.com/showthread.php?t=1756776" ktoonsez kernel can be found in its own thread.
But, you may really want to consider a newer ROM in order to change to something with the stagefright fixes. I think any of these may require the latest 4.4.2 bootloader and modem. (What say you @audit13?)
Click to expand...
Click to collapse
I'm not opposed to any of this. Mostly just trying to slim down this phone to the basics as much as I can and am quite open to any recommendations. Main thing I want to maximize is battery life & simplicity since this is for my wife and those are her major wants in a phone. I figure any kind of ROM that just covers the basics should cover my bases & would prefer one with a darker/black skin to maximize battery life w/ the OLED screen. I am in the process of flashing to the Roger's stock ROM as I type this w/ my fingers crossed.
Just to add, no over clocking or anything of that nature is desired. If I remember correctly I ended up putting the ktoonsez kernel on one of my handsets, either this Galaxy S3 or my Galaxy S5, though I can't recall which since it was so long ago.
Alright! So progress! Wifi, Baseband version, IMEI and all other missing information restored & now works w/ stock rom flash. In process of reflashing TWRP now.
Let us know what happens.
Still all good with TWRP installed. Have not flashed back on a custom ROM yet. After reviewing some of the above recommendations, I am kind of liking the looks & features of TMS3KK (http://forum.xda-developers.com/showthread.php?t=2725750) and feel it would suit my needs.
I factory reset, cleared cache, and cleared Dalvik thru TWRP & then made a back up. Prior to this, I confirmed everything was still working normally w/ phone fully loaded after TWRP was installed.
One of the things mentioned on the installation instructions for that ROM is the following:
---
Do not mix and match 4.3 firmware (bootloaders/modem) with the new 4.4.2 ones. You will hard brick and I warned you. This works the same as any 4.3 or ND8port ROM with 4.3 firmware and it can use the new 4.4.2 ones also.
Link to recovery flashable i747 and i747M 4.4.2 bootloader and modem packages: http://forum.xda-developers.com/gala...hable-t2856914
---
How would I go about confirming my current bootloader/modem versions to make sure they are both 4.4.2 before flashing this ROM? At the link provided, those files/links to the files were removed because they were causing some bricked devices per a note at the top of that thread. Here's a link to the thread I am referencing since the above link looks to be broken. (http://forum.xda-developers.com/gal...mware-ne4-ne6-nf2-recovery-flashable-t2856914)
If you flashed the latest stock rom, you are running the latest 4.4.2 bootoader and modem.
You can download and run the Samsung phone info app from the play store to confirm this.
You should be good to flash any d2lte or d2att rom.
I recommend not flashing any modem or bootoader from this point forward unless the bootoader and modem are newer than the currently installed botloader and modem. Also, the botloader and modem must be matched to each other.
audit13 said:
If you flashed the latest stock rom, you are running the latest 4.4.2 bootoader and modem.
You can download and run the Samsung phone info app from the play store to confirm this.
You should be good to flash any d2lte or d2att rom.
I recommend not flashing any modem or bootoader from this point forward unless the bootoader and modem are newer than the currently installed botloader and modem. Also, the botloader and modem must be matched to each other.
Click to expand...
Click to collapse
Thank you so much for the help and information. I guess I never realized that the bootloader & modem were installed w/ the stock rom as I always have flashed those separately through Odin when needed. Definitely good information to have and not easy information to find. I have successfully got my custom ROM on there and am now fine-tuning it for the wife.
fodor362 said:
Thank you so much for the help and information. I guess I never realized that the bootloader & modem were installed w/ the stock rom as I always have flashed those separately through Odin when needed. Definitely good information to have and not easy information to find. I have successfully got my custom ROM on there and am now fine-tuning it for the wife.
Click to expand...
Click to collapse
Glad to hear the phone is running well.
I've heard it said "Happy wife, Happy life."
hello all, i have a fresh out of the box T999, firmware ver 4.1.2, kernel ver ends w/ MD5. i need to upgrade the firmware on this phone to 4.4.x so i can run the Amazon Flex Delivery app on it, and am kinda confused as to what the proper route is to get there from stock 4.1.2... im reading about 4.3 adding Knox, tripping 'Modified' switches, etc and really just need to know what the upgrade path is and proper order. im familiar w/ using Odin and custom recoveries, but also read that just installing a custom recovery on this phone will trigger it into modified mode in a permanent way. dont care about being rooted, i dont even think the Amazon Delivery app will run on a rooted device.
any advice or info would be greatly appreciated, thx in advance all..
The last official update to the T-Mobile Galaxy S3 was Android 4.3. If you want 4.4 or higher, then you're going to have to flash a custom ROM. If you aren't comfortable flashing ROMs, then you'll need a newer phone.
I suggest using Odin to flash the latest ROM to your phone, install the app, and see if it runs.