hey guys,
previously i rooted with the first method(the cf-auto-root). which has a stock recovery. however, recently my phone would prompt to check for updates. when it checks, it goes on and on forever, without a result.
since i noticed that the jellybean 4.1.2 is out, i thought that this could be it. but because i rooted, i thought that it might interfere with the OTA update.
therefore i went to superSU>full unroot
does this fully unroot my device? what else should i do if not?
then, i did something terribly stupid. from my previous end point,(the full unroot from superSU), i rerooted my phone using the exynos abuse.
now, seeing that i've done something really wrong, im lost. can you guys shed a light on this? what should i do if i want to unroot and back to stock?
if i want to update my phone to 4.1.2, do i revert back to stock and update? or should i just flash the firmware now from samsung-updates.com?
Your asking too many questions at the same time.
If im correct,you want to get back to stock rom. Download the stock rom from your country and flash it via ODIN.
That should do it,
report back.
zeeshanonlyme said:
Your asking too many questions at the same time.
If im correct,you want to get back to stock rom. Download the stock rom from your country and flash it via ODIN.
That should do it,
report back.
Click to expand...
Click to collapse
thanks for the reply mate.
sorry for asking too many questions at once lol. disregard those.
i do have a new question now.
i did fully unroot with the superSU->full unroot, and then i rooted again using the exynos abuse.
if i flash the 4.1.2 firmware now, does it remove the patch by the exynos abuse?
my next reply will be late im having an exam at 2.
niekehecv said:
thanks for the reply mate.
sorry for asking too many questions at once lol. disregard those.
i do have a new question now.
i did fully unroot with the superSU->full unroot, and then i rooted again using the exynos abuse.
if i flash the 4.1.2 firmware now, does it remove the patch by the exynos abuse?
my next reply will be late im having an exam at 2.
Click to expand...
Click to collapse
To the best of my knowledge, the patch would be removed when you flash 4.1.2 .
Good Luck for the exam
zeeshanonlyme said:
To the best of my knowledge, the patch would be removed when you flash 4.1.2 .
Good Luck for the exam
Click to expand...
Click to collapse
thanks sir.
before i flash the 4.1.2, may i know what else am i required to do? do i need to perform any wipes?
niekehecv said:
thanks sir.
before i flash the 4.1.2, may i know what else am i required to do? do i need to perform any wipes?
Click to expand...
Click to collapse
If you are flashing via ODIN , do make a backup of contacts and messages if necessary as they will be lost while flashing.
Other than that via ODIN, you dont need to do anything else.
zeeshanonlyme said:
If you are flashing via ODIN , do make a backup of contacts and messages if necessary as they will be lost while flashing.
Other than that via ODIN, you dont need to do anything else.
Click to expand...
Click to collapse
one more question lol
my flash counter is always 1, even after reset. i unrooted from superSU and rerooted again using exynos abuse. could it be becasue i rooted using exynos and patched it, therefore the flash counter is 1? my status is custom as well.
Not quoting every post but reply to most post above
1.what easiest way i can say is download ROM you want to flash (see 1st line on my signature post#1) and flash using Odin.
-This won't erase anything, but i recommend backup of your imp data, as anything goes wrong and you may need to wipe.
then use Cf auto root (1st line on my signature post#2) to root, as latest release exynose app won't work
then use triangle away to reset counter.
2.Short way
backup your data, use triangle away to reset counter (provided you dont have custom ROM/Recovery/Kernel)
disable exploit (both place) in exynose application
Unroot from exynose application
reboot to recovery and wipe cache and data
Now you may get OTA, update it and root using CF auto root as link shown you in option1 above
still you didn't get OTA, you can always go with option 1 above.
dr.ketan said:
Not quoting every post but reply to most post above
1.what easiest way i can say is download ROM you want to flash (see 1st line on my signature post#1) and flash using Odin.
-This won't erase anything, but i recommend backup of your imp data, as anything goes wrong and you may need to wipe.
then use Cf auto root (1st line on my signature post#2) to root, as latest release exynose app won't work
then use triangle away to reset counter.
2.Short way
backup your data, use triangle away to reset counter (provided you dont have custom ROM/Recovery/Kernel)
disable exploit (both place) in exynose application
Unroot from exynose application
reboot to recovery and wipe cache and data
Now you may get OTA, update it and root using CF auto root as link shown you in option1 above
still you didn't get OTA, you can always go with option 1 above.
Click to expand...
Click to collapse
alrighty, thanks drketan. however i do have a question. how do i wipe cache and data from a stock recovery?
Reboot to recovery with volume up +home +power
Release power once you see samsung logo, but keep pressing rest two
You will see option to wipe cache. And wipe data (factory reset)
Sent from my GT-N7100 using xda premium
Related
Hi guys,
I know this may not be the best place to ask this, but I don't have an high enough postcount to reply on the developer section, so... here we go
I've rooted my Note 2 using the procedure 1 shown here : http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2 . The problem is, even after I run Triangle away, my device si marked as "modified" ( aka, I guess the counter is not properly reset).
I've no idea why, and the thing doesn't really bother me that much, if it wasn't for the next question :
Can I update my firmware using keis with a rooted phone, or that means looking for trouble?I'l stuck with the LJ1 firmware and afaik a new version should be avaible ... and again, in case I have to somehow reset the phone to install the update, is it worth it?
Thanks
I guess the counter is not properly reset......
Click to expand...
Click to collapse
You should post in Q/A thread
Anyway
Not properly reset means?
counter is 'No' or non zero?
which method you have used? 1 or 2
if counter is zero, you have used method 1 then factory reset, status should turn to 'official'
dr.ketan said:
Not properly reset means?
counter is 'No' or non zero?
Click to expand...
Click to collapse
The counter is 1 even after Triangle Away
which method you have used? 1 or 2
Click to expand...
Click to collapse
I used method 1 ( I don't plan on using modded firmwares)
if counter is zero, you have used method 1 then factory reset, status should turn to 'official'
Click to expand...
Click to collapse
At the moment, the device status is "modified", and yet, as I said, I carefully followed method 1 and I've tried to reset the counter using Triangle Away ( without success)
PS : thanks for your fast reply
You should get your rom from samfirmware.com and flash it using odin. If you're gonna rely on OTA or Kies, then you'll be outdated all the time. Also, counter stuck at 1 usually means you have custom recovery or custom rom installed. Factory resetting will usually remove Modified status, although I don't see the point of it, since like I said you needn't rely on OTA or Kies when there is a much better alternative.
kaharas said:
The counter is 1 even after Triangle Away
I used method 1 ( I don't plan on using modded firmwares)
At the moment, the device status is "modified", and yet, as I said, I carefully followed method 1 and I've tried to reset the counter using Triangle Away ( without success)
PS : thanks for your fast reply
Click to expand...
Click to collapse
If you are on stock rom and just rooted with method 1, then just reset counter again. And let boot it normally once before checking counter.
Sent from my GT-N7100 using xda premium
dr.ketan said:
If you are on stock rom and just rooted with method 1, then just reset counter again. And let boot it normally once before checking counter.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Thanks again for your time I am on a stock pre-rooted rom, but I've rooted a month or so ago, and I've already tried to reset the counter multiple times ( and I've restarted a lot of times too). Still, no success in changing my phone status.
MohJee said:
cut
Click to expand...
Click to collapse
Thanks for your reply too. Yet, the same questions stand :
1) If I download a newer firmware from the website you linked, can i flash it without bricking the phone, or I need to somehow unroot the phone before flashing
2) I've looked for firmwares of my country ( Italy ), and it looks like not even October's update is here yet -.- Should I just search using a foreign country ( US, UK or whatever) ? and if so ... which one?
PS: I'm sorry for the probably trivial questions, I'm a total noob
kaharas said:
Thanks again for your time I am on a stock pre-rooted rom, but I've rooted a month or so ago, and I've already tried to reset the counter multiple times ( and I've restarted a lot of times too). Still, no success in changing my phone status.
Thanks for your reply too. Yet, the same questions stand :
1) If I download a newer firmware from the website you linked, can i flash it without bricking the phone, or I need to somehow unroot the phone before flashing
2) I've looked for firmwares of my country ( Italy ), and it looks like not even October's update is here yet -.- Should I just search using a foreign country ( US, UK or whatever) ? and if so ... which one?
PS: I'm sorry for the probably trivial questions, I'm a total noob
Click to expand...
Click to collapse
You can flash without unrooting. Only adverse thing that will happen is that you'll lose root and will have to root again.
Yes, your country seems to be late to the update cycle. You can wait for the update or if you really want it now you can flash to another countries' rom.. As long as it is an international version rom. So USA is a no-no.
MohJee said:
You can flash without unrooting. Only adverse thing that will happen is that you'll lose root and will have to root again.
Yes, your country seems to be late to the update cycle. You can wait for the update or if you really want it now you can flash to another countries' rom.. As long as it is an international version rom. So USA is a no-no.
Click to expand...
Click to collapse
Any advice about which one is international?
And, while we are at it ... how can I make triangle away work? this whole counter thing is setting a feud between me and my note 2
Read sticky thread by me in android original development section.
You can flash any stock rom.
Sent from my GT-N7100 using xda premium
I do hope this is relevant here, since I'm having much the same problems. I'm a bit of a noob, but I've done my research, as you may see from the post.
I plan to have stock ROM/Recovery with Mobile Odin and the RedPill kernel. I'm kind of stuck. Let me run you through what I did so far, to clarify:
Rooted with method 2 almost w/o update or modification.
Wanted back in on OTA, so flashed stock recovery from here.
Used TriangleAway, but it told me it couldn't get/set the counter. Told it to reboot and do it, but just powered off the phone and didn't turn into the mentioned "special boot mode".
Can't get into recovery after attempting TriangleAway, that just powers off the phone. Recovery bricked? Download mode works, though.
Here's what I want to do:
Stock recovery/ROM (latest) with OTA and root, and Kies updatability.
Working stock recovery.
RedPill Kernel (optional since don't know how it may react with OTA/Kies)
Mobile Odin
Titanium Backup for preserving my Apps
I'm ready to use Titanium Backup for preserving my Apps, but will it preserve my settings/alarms? Or are those backed up to Samsung/Google?
You can refer me to the rooting post, if needed. Just give me an overview of what needs to be done and I'll do the rest.
EDIT: Came up with a possible solution.
Titanium Backup
Ketan's Thread
Stock ROM
Root: Method 1.
Mobile Odin
Optional
Convert Redpill to *.tar.md5 using Toolkit
Flash using mobile Odin
Titanium Backup (Restore)
What are the chances of this succeeding? Can I do the "optional" ones and not lose OTA?
Thanks a lot to any effort anyone may make to answer.
Thanks again everybody for your replies
I was wondering if anybody else had any idea about how to solve my main problem, that seems to have gone unnoticed for a while now : my counter is still at 1.
I've tried using triangle and restart teh device once before checking the status, but nothing has changed.
As I've already said, I used method one, and flashed a prerooted stock rom, but it looks like the counter is increased from 0 to 1 everytime I reboot.
kaharas said:
Thanks again everybody for your replies
I was wondering if anybody else had any idea about how to solve my main problem, that seems to have gone unnoticed for a while now : my counter is still at 1.
I've tried using triangle and restart teh device once before checking the status, but nothing has changed.
As I've already said, I used method one, and flashed a prerooted stock rom, but it looks like the counter is increased from 0 to 1 everytime I reboot.
Click to expand...
Click to collapse
i have the same situation, always shows 1, dr. recommend me flash stock via pc odin and do a full wipe, but i havent try it yet,
currently i just use custom kernel and triangle away set it reset on boot
emprize said:
i have the same situation, always shows 1, dr. recommend me flash stock via pc odin and do a full wipe, but i havent try it yet,
currently i just use custom kernel and triangle away set it reset on boot
Click to expand...
Click to collapse
NOTE: I have the LTE version (n7105) but I assume the following also applies to the n7100
I had the very same issue as the OP: I rooted the device using PC Odin with dr.ketan's method #1 but couldn't reset the counter with Triangle Away.
I then downloaded the firmware for my model from samfirmware and flashed it using Mobile Odin Pro with all the EverRoot options and all the wipes selected.
Now the device is rooted and the counter is back to zero
Hope this helps.
Ok so I'm getting annoyed with the OTA update messages and useless downloading. From what I've read and confirmed, I need a stock recovery to do this but I'm not sure how to get that back as I'm running TWRP. I've heard of people havinf root survive with this update so I'm pretty confident things won't screw up.
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Flash cf auto root
mrmcpowned said:
Ok so I'm getting annoyed with the OTA update messages and useless downloading. From what I've read and confirmed, I need a stock recovery to do this but I'm not sure how to get that back as I'm running TWRP. I've heard of people havinf root survive with this update so I'm pretty confident things won't screw up.
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Why do you want to do an ota?
Just disable it and youll be golden.
Have you seen this sticky?
Tons of great info guides roms etc.
http://forum.xda-developers.com/showthread.php?t=1987541
If you really must go back to stock just for that silly ota you can do it via odin or click the link in my signature (web view only sorry ) or look for my guide in q&a.
Both will put you back to a stock recovery my way which is really just instructions for efr, will garauntee you a normal status.
Usually any thing in the ota os already covered by all the great roms we have!
Gl!
:beer:
Edit: to disable ota you need TiBu and just disable or "freeze" everything at&t and the "fw updater". I cant remember specifacaly what they are called because mine our gone thanks to my awesome rom.
Dony delete, freeze only.
Or.... install a nice rom free of bloat ware!
freakboy13 said:
Why do you want to do an ota?
Just disable it and youll be golden.
Have you seen this sticky?
Tons of great info guides roms etc.
http://forum.xda-developers.com/showthread.php?t=1987541
If you really must go back to stock just for that silly ota you can do it via odin or click the link in my signature (web view only sorry ) or look for my guide in q&a.
Both will put you back to a stock recovery my way which is really just instructions for efr, will garauntee you a normal status.
Usually any thing in the ota os already covered by all the great roms we have!
Gl!
:beer:
Edit: to disable ota you need TiBu and just disable or "freeze" everything at&t and the "fw updater". I cant remember specifacaly what they are called because mine our gone thanks to my awesome rom.
Dony delete, freeze only.
Or.... install a nice rom free of bloat ware!
Click to expand...
Click to collapse
But the thing is I AM ON STOCK, it's just rooted. I want to get back the stock RECOVERY as I have TWRP. Is there really no way to simply do that with a rooted stock firmware and not have to rewrite over everything?
mrmcpowned said:
But the thing is I AM ON STOCK, it's just rooted. I want to get back the stock RECOVERY as I have TWRP. Is there really no way to simply do that with a rooted stock firmware and not have to rewrite over everything?
Click to expand...
Click to collapse
^^^ what twanskys204 recommended in Post#2 ^^^ did you try that? CF Auto-Root will only update the subinary.. install the supersu apk... and flash the stock recovery to the recovery partition.. it will not overwrite your rom (/system or /data partitions) or your modem partition. The only thing is will "rewrite" is the recovery (which you want as it's the stock recovery) and the supersu root. Flashing this will increment the flash counter... but yours is already past "0" since you stated you have TWRP recovery. Besides, you can use TriangeAway app to return flash counter to zero if it's a concern.
DoctorQMM said:
^^^ what twanskys204 recommended in Post#2 ^^^ did you try that? CF Auto-Root will only update the subinary.. install the supersu apk... and flash the stock recovery to the recovery partition.. it will not overwrite your rom (/system or /data partitions) or your modem partition. The only thing is will "rewrite" is the recovery (which you want as it's the stock recovery) and the supersu root. Flashing this will increment the flash counter... but yours is already past "0" since you stated you have TWRP recovery. Besides, you can use TriangeAway app to return flash counter to zero if it's a concern.
Click to expand...
Click to collapse
Thanks, I needed a bit of an explanation on this. Now to get onward to flashing my recovery
So many of you have encountered my numerous posts here, because I had problems with my phone, and I gave up. so I wanna send it for repairs soon. So is this still eligible for warranty?
Here's what I did:
1-update OTA to 4.1.2
2-Root using the Note 2 Toolkit
3-While Rooted install S3 Rom by mistake. Corrupt EFS (backed up)
4-Install Stock 4.1.2 XEF, same build, Different Modem.
5-Downgrade to 4.1.2 January. XEF.
6-Triangle Away to Reset Stats:
No
Samsung Firmware
Official
7-Odin Pro Flash Stock 4.1.2 June.
8-Status show :Modified.
9-Recovery Mode (VolUp), Reset Data/Cache
10-Status show: Normal
11-IMEI/CP still corrupted. Can't restore.
12-Flash original Modem that came with phone (which Idk why doesn't work) DMF1.
Now I have Root (no busybox), and I'm backing up all my apps, then what I'm gonna do is simply uninstall ODIN Pro (as it became a system app), uninstall all Root Apps. Then SuperSU: Full UnRoot.
hopefully no one can tell it was rooted.
thanks
Just in case I'm gonna provide them with my EFS backup, maybe they can sort stuff out. or maybe they will know that it was rooted?
As long as the status of your device is modified, then no.
Reseting the binary counter via triangle away is a must, well for me.
I think all you need is here: http://forum.xda-developers.com/showthread.php?t=1896696
laziafbaito said:
As long as the status of your device is modified, then no.
Reseting the binary counter via triangle away is a must, well for me.
I think all you need is here: http://forum.xda-developers.com/showthread.php?t=1896696
Click to expand...
Click to collapse
I already set that after performing a full wipe my status are normal again.
Do full wipe after uninstalling root app.
And again check status in download mode.
It is advisable to flash stock rom once again after unroot for double verification.
sent from my GT-N7100. Press thanks if I helped..
MBariya said:
Do full wipe after uninstalling root app.
And again check status in download mode.
It is advisable to flash stock rom once again after unroot for double verification.
sent from my GT-N7100. Press thanks if I helped..
Click to expand...
Click to collapse
Or simply hard brick it. thats what i did. then tolled them that i installed a Update and the phone went Dead after that they. they replaced the Main board on the phone because they where unable to fix my EFS problem. and now its working perfectly again. so either triangle away or hard brick it.
If you hard brick it they have to prove that you caused the failur of the phone wich the cant and they will just repair it and send it back to you
So I tried to root my phone (GT-N7100) running on 4.3 Jellybean, but had problems with Knox and Super User so I unrooted the device with Zedomax's help.
1.) Install the custom recovery
2.) Reset the Binary count with Traingle Away
3.) Unrooted with Super User
Root Checker says I dont have root, but Knox and OTA won't let me check for updates. Checked my Device Status still on Custom
I am LOST on what to do.. couldn't find anything. PLS HELP MEEE!! want my phone back to stock like out of the box. Phone is from the Philippines (Globe)
P.S. First time posting here (NOOB!)
FTBLLKiD said:
So I tried to root my phone (GT-N7100) running on 4.3 Jellybean, but had problems with Knox and Super User so I unrooted the device with Zedomax's help.
1.) Install the custom recovery
2.) Reset the Binary count with Traingle Away
3.) Unrooted with Super User
Root Checker says I dont have root, but Knox and OTA won't let me check for updates. Checked my Device Status still on Custom
I am LOST on what to do.. couldn't find anything. PLS HELP MEEE!! want my phone back to stock like out of the box. Phone is from the Philippines (Globe)
P.S. First time posting here (NOOB!)
Click to expand...
Click to collapse
Now, we do not any solution for tripping Knox and resetting knox counter. But you've to flash your phone with official rom by downloading it from: sampro.pl/firmware/android/samsung-gt-n7100/.
First check your phone's current version by dialing *#1234# and then select proper rom from provided website. This might (But not guarantee it) help you to avail official updates.
m.b.jikre said:
Now, we do not any solution for tripping Knox and resetting knox counter. But you've to flash your phone with official rom by downloading it from: sampro.pl/firmware/android/samsung-gt-n7100/.
First check your phone's current version by dialing *#1234# and then select proper rom from provided website. This might (But not guarantee it) help you to avail official updates.
Click to expand...
Click to collapse
Thanks!! Will try it. Will this solve the device status problem?:victory:
m.b.jikre said:
Now, we do not any solution for tripping Knox and resetting knox counter. But you've to flash your phone with official rom by downloading it from: sampro.pl/firmware/android/samsung-gt-n7100/.
First check your phone's current version by dialing *#1234# and then select proper rom from provided website. This might (But not guarantee it) help you to avail official updates.
Click to expand...
Click to collapse
Found my Country and carrier but only CSC matches with my phone not the build number? Should I continue?
FTBLLKiD said:
Thanks!! Will try it. Will this solve the device status problem?:victory:
Click to expand...
Click to collapse
Definitely sure about Knox it would not restore to 0x0. But you'll avail official update.
Sent from my GT-N7100 using XDA Premium 4 mobile app
---------- Post added at 09:14 PM ---------- Previous post was at 09:10 PM ----------
FTBLLKiD said:
Found my Country and carrier but only CSC matches with my phone not the build number? Should I continue?
Click to expand...
Click to collapse
As per my advice try to find replica of your stock firmware. You may, but backup first your efs partition. In case if that no matched for your device it'd probably delete your IMEI, wifi, bluetooth address. Later it helps easily restore the data without any kinda worries.
Sent from my GT-N7100 using XDA Premium 4 mobile app
m.b.jikre said:
Definitely sure about Knox it would not restore to 0x0. But you'll avail official update.
Sent from my GT-N7100 using XDA Premium 4 mobile app
---------- Post added at 09:14 PM ---------- Previous post was at 09:10 PM ----------
As per my advice try to find replica of your stock firmware. You may, but backup first your efs partition. In case if that no matched for your device it'd probably delete your IMEI, wifi, bluetooth address. Later it helps easily restore the data without any kinda worries.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Correct me if i'm wrong, but in order to back-up EFS you need a rooted phone right? or is there a safe way to back-up EFS
with an unrooted phone
FTBLLKiD said:
Correct me if i'm wrong, but in order to back-up EFS you need a rooted phone right? or is there a safe way to back-up EFS
with an unrooted phone
Click to expand...
Click to collapse
You don't need a rooted phone at all, but a custom recovery like - CWM recovery, Philz Touch, TWRP etc.
m.b.jikre said:
You don't need a rooted phone at all, but a custom recovery like - CWM recovery, Philz Touch, TWRP etc.
Click to expand...
Click to collapse
Thanks!! now I can remove my other thread about rooting with TRWP recovery. LOL!
m.b.jikre said:
You don't need a rooted phone at all, but a custom recovery like - CWM recovery, Philz Touch, TWRP etc.
Click to expand...
Click to collapse
hey got another question, why do I need to flash the stock rom/firmware when I just rooted my phone and installed Super User but didn't flash a custom rom, only used Odin to get Philz touch 5.15 and used Philz touch for SuperSU. sorry for asking too much
FTBLLKiD said:
hey got another question, why do I need to flash the stock rom/firmware when I just rooted my phone and installed Super User but didn't flash a custom rom, only used Odin to get Philz touch 5.15 and used Philz touch for SuperSU. sorry for asking too much
Click to expand...
Click to collapse
Nope you didn't need at all, that's needed when you're selling your phone, because person next to you whomever will likely to need stocked phone... And all.
Sent from my GT-N7100 using XDA Premium 4 mobile app
FTBLLKiD said:
hey got another question, why do I need to flash the stock rom/firmware when I just rooted my phone and installed Super User but didn't flash a custom rom, only used Odin to get Philz touch 5.15 and used Philz touch for SuperSU. sorry for asking too much
Click to expand...
Click to collapse
when you rooted your phone, there's a modified inside the system, that's why samsung bootloader will detect it as "modified/custom" instead of "official". I know your ROM is still official after you unroot it. But, unroot just remove the access to the root/system file. Whatever modified during the rooting process earlier will remain the same. Therefore, if you want to get an "official" status back, you have to flash stock original firmware after you have clean binary, & unroot your device.
cheers.
antique_sonic said:
when you rooted your phone, there's a modified inside the system, that's why samsung bootloader will detect it as "modified/custom" instead of "official". I know your ROM is still official after you unroot it. But, unroot just remove the access to the root/system file. Whatever modified during the rooting process earlier will remain the same. Therefore, if you want to get an "official" status back, you have to flash stock original firmware after you have clean binary, & unroot your device.
cheers.
Click to expand...
Click to collapse
Hahaha thought Triangle Away would fix that device status problem being Modified/Custom
So you know anyway to download the stock rom quicker. My downloads are always unsuccesful...
FTBLLKiD said:
Hahaha thought Triangle Away would fix that device status problem being Modified/Custom
So you know anyway to download the stock rom quicker. My downloads are always unsuccesful...
Click to expand...
Click to collapse
samfirmware
other than that, I have no idea. Just try to google for the firmware you want. u might get other links from google.
have the same problem with my note 2, and i want to know if the solution provided worked
.
I'm sorry i had the wrong links and because of this i had miss information. So i formally apologize by updating with the proper links.
this first method doesn't work with the Sph-L710T or the Sph-L710 on NJ2/NJ3
First method: You can root the stock 4.4.2 ND8/NDC:laugh:
1st. Make sure your on 4.4.2 ND8 or NDC
2nd. Download Towel Root
3rd. Place Towel Root in sdcard or internal storage
4th. With any file manager find and install Towel Root
5th. Open Towel Root and well root
6th. Go to play store and download https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and also https://play.google.com/store/apps/details?id=stericson.busybox&hl=en let super user update the binary
7th. Flash any recovery you want {personally i went with PhilZ Touch (this was before PhilZ had a root Option)}
8th. Enjoy your rooted stock 4.4.2 ND8/NDC
Down below is one more way too root Stock ND8/NDC/NJ2/NJ3 or NF4/OA3 (L710T) and basically any other update
(link to the almighty ODIN)
Second Method: mostly recommended
1st. Odin flash TWRP
2nd. In Odin choose PDA, PA or AP then select the TWRP Tar you just downloaded
3rd. Make sure Auto reboot is unchecked (also at this time your s3 should be in download mode)
4th. Hit start and let Odin let it finish!!
5th. Hold power button to turn off your S3, after it turns off about 10 seconds later it will turn back on to the battery charging screen so before that quickly hold Volume+ and Home, to boot into recovery
6th. now your in TWRP
7th. so to root your stock rom with TWRP flash the following file SuperSU.zip by Chain fire (pro tip. Install any other custom recovery the same way I did for TWRP above if it is in .tar format)
and here is Philz recovery for the D2Lte 6.48.4 ( which you must flash in TWRP)
and here is TWRP that was made specifically for the D2Rephersher/triband/L710T TWRP (which you must flash in a recovery)
Third method Most recent.
Hidyman said:
This is in reference to Samsung Galaxy S3 for Boost Mobile SPH-L710.
Just want to let anyone out there that updated their Boost S3 to L710VPUC0J1 know that you can still root and/or ROM your phone.
Use the instructions to (use Odin to) update the recovery to TWRP first (in the second set of instructions). I had trouble trying to go right to PhilZ Recovery (which I believe is based off of ClockWorkMod). I Had to do the TWRP (twrp-2.8.7.0-d2spr.img.tar) first.
It was the only way to get it to actually accept the recovery, not sure why, maybe because the latest Samsung firmware fixed an exploit or two.
This is an older phone, but it is still a viable one.
I hope this helps someone out there.
It took me a while to figure this quandary out.
As always this WILL flag KNOX, but I'm sure this won't be an issue at this date and time (8/2016).
Click to expand...
Click to collapse
work on ND8 rom? sprint phone?
Tekone said:
work on ND8 rom? sprint phone?
Click to expand...
Click to collapse
i want to say yes but towel root does come with a warning that it might brick your device.....but i want to say yes since most things that can be done to the ND8 can be done to the NDC and also in reverse order.....so try it and report back it will be good to know if it works on both bootloaders
Sprint S3 Android 4.4.2 ND8-It works!
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!
oops
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.
henhun said:
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.
Click to expand...
Click to collapse
ND8 or NDC? have you tried updating your profile/PRL?
6th_Hokage said:
ND8 or NDC? have you tried updating your profile/PRL?
Click to expand...
Click to collapse
Ya know. People keep talking about ND8 and ND___. I have no idea what that means. I know I should be embarrassed.
UPDATE: FIGURED IT OUT, BASEBAND VERSION. GOTCHA. IT IS NDC.
I was JUST coming back to update my post. I DID update the PRL and restarted my phone. That seems to have done the trick. Thank GOD I got my data connection back!! It worked. Even though I found the info somewhere else, thank you so much for the quick reply. PRL update fixes the problem. You're awesome.
I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app
jbnorton0524 said:
I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
many users of basically the same phone report different things with every root method out there. If it worked for you that's great tell other users what you did for it to work and if it didn't work, then ask for help and you will get help; some people don't have success with any method while others do with all of the methods.....my phone falls under every method.....
Successful Towelroot on VM Galaxy S3 4.4.2.NDC
6th_Hokage said:
you can root the stock 4.4.2
first step make sure your on 4.4.2
second step download Towel Root
third step place Towel Root in sdcard or internal storage
fourth step with any file manager find and install Towel Root
fifth step root
sixth step go to play store and download Superuser (Chainfire) and also Busy Box (Stericson) let super user update the binary
seventh step flash any recovery you want personally i went with Philliz Touch
eighth step if you want flash a custom rom now if not enjoy your rooted stock 4.4.2
Click to expand...
Click to collapse
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is usafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave
dave260 said:
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is unsafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave
Click to expand...
Click to collapse
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the binary (<---completely forgot to fix that) you must hit the option normal not TWRP/CWM
churninern said:
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!
Click to expand...
Click to collapse
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.
Darkangels6sic6 said:
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.
Click to expand...
Click to collapse
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Knox Counter and "Device Status"
6th_Hokage said:
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the recovery you must hit the option normal not TWRP/CWM
Click to expand...
Click to collapse
Thanks for your response. I may be over thinking these indicators. All I did was Towelroot, successfully. On the phone, the "About Device, Status" now says CUSTOM (was "Official"). The Knox counter according to app "Phone Info" shows Knox Counter at 0x0. As you said, since the counter is not tripped, should be no problem on warranty. So then Device Status CUSTOM is not a problem? I'm not really worried about warranty at this point, but I think I'll hold off further mods for another 6 moths.
Thanks again for your help!
6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
Thanks. I tried the md8 and mk3 "mk3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all.
I'm guessing maybe I should install twrp. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most md8 Roms want you to odin or flash an md8 base.
Darkangels6sic6 said:
Thanks. I tried the ND8 and MK3 "MK3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all
I'm guessing maybe I should install TWRP. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most ND8 Roms want you to Odin or flash an md8 base.
Click to expand...
Click to collapse
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be
6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
6th_Hokage said:
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be
Click to expand...
Click to collapse
I was afraid you would say that.
Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!
strangelady said:
Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!
Click to expand...
Click to collapse
your welcome strangelady and if you want check out the links in my signature area for other cool stuff
added two more t=root methods