Develop Bugs

Position sensor or something?

Ok, it seems there is a position sensor in TyTN (correct me if I'm wrong). When my phone is in its case on my belt and it's turned on (usually by a call), it's rotated (as if the keyboard's open). It takes too long time for it to rotate, and I can't answer the call until it rotates back to normal. So my question is, can this sensor be turned off, or is there other thing, that makes the screen to rotate and eventually how can I solve the problem? Thanks in advance.
P.S. I'm useing Schap's ROM, but the problem existed in the official rom, and the Black rom, and the official WM5 rom

no position sensor that I know of and I have never had this problem :s

[email protected]™ said:
Ok, it seems there is a position sensor in TyTN (correct me if I'm wrong). When my phone is in its case on my belt and it's turned on (usually by a call), it's rotated (as if the keyboard's open). It takes too long time for it to rotate, and I can't answer the call until it rotates back to normal. So my question is, can this sensor be turned off, or is there other thing, that makes the screen to rotate and eventually how can I solve the problem? Thanks in advance.
P.S. I'm useing Schap's ROM, but the problem existed in the official rom, and the Black rom, and the official WM5 rom
Click to expand...
Click to collapse
Yeah, there is a position sensor on the hermes. It's a magnetic sensor that detects whether the keyboard is open or not.
The problem is most likely your case. I've heard of issues like yours. The magnetic snap on the case fools the hermes into thinking the keyboard is open.
I don't believe that there is a fix to bypass the sensor, as it is hardware. But I may be wrong. If not then you might need to look at another case that uses velcro or something.

intrglctcrevfnk said:
Yeah, there is a position sensor on the hermes. It's a magnetic sensor that detects whether the keyboard is open or not.
The problem is most likely your case. I've heard of issues like yours. The magnetic snap on the case fools the hermes into thinking the keyboard is open.
I don't believe that there is a fix to bypass the sensor, as it is hardware. But I may be wrong. If not then you might need to look at another case that uses velcro or something.
Click to expand...
Click to collapse
ah now that would make sense, i never use that stupid case that comes with it, they are really ugly! so that would explain why i never noticed it.

My wife came up with a great solution when I had this poblem (standard case causing phone to start in landscape) - turn the phone the other way round! Now I have the screen facing my belt and the phone is ALWAYS in portrait when I get it out.
Sounds silly, but try it - it works!

Yep, that's a sollution, but there is one other detail. There's no other position I can plug the earphones .

[email protected]™ said:
Yep, that's a sollution, but there is one other detail. There's no other position I can plug the earphones .
Click to expand...
Click to collapse
Solution..... Bluetooth Headphones.

It appears to be a magnetic switch...
Your case must have a strong magnet on it, I can't get it to effect the switch if the phone is completely closed. Only if I have it partially open.

GldRush98 said:
It appears to be a magnetic switch...
Your case must have a strong magnet on it, I can't get it to effect the switch if the phone is completely closed. Only if I have it partially open.
Click to expand...
Click to collapse
I have exactly the same problem. Also, my phone is NEVER put into standby before closing the keyboard.
I'm going to try storing it with the screen facing towards my belt.

I simply use Brando case and HTC BT S-100 headset. and never have a problem with phone starting in landscape.
http://www.boxwave.com/images_bw/products/thumbnails/dlc_htc_tytn_frtbck_lg.jpg

FINALLY... WHAT YOU HAVE ALL BEEN WAITING FOR
Originally posted from here
shlomki said:
I've come to notice that no one REALLY knew how to fully disable screen rotation on WM devices.
Some offered 3rd party apps to get the job done, some only knew how to disable automatic rotation, but when the device went into standby and woke up again - the screen rotated back. So that didnt really work.
So if you're as desperate as i was about screen rotation,
this is what you need to do:
1. Get dotfred's free taskmanager HERE, and run it.
2. Go to "Devices" tab, and look for "MIS1:" device (oem_misc.dll)
3. Long-Tap on it, and tap on "Stop"
4. Long-Tap on it again, and now choose "Set Manual"
5. Go to "Notifications" tab, and look for "Notifications\NamedEvents\VCPowerWakeupEvent"
6. Tap on it to make it selected
7. Disable it
(In dotfred's taskmanager, there should be a button for disabling it, but for some reason some devices couldn't see the button icons, although the buttons are still clickable. Under the notifications list there is an empty light-blue line - the buttons are there, eventough you can't see them.
The disable buttons is somewhere i the middle of that light-blue line, just tap the center until a message box popps up and asks if you'd like to disable this notification - Tap on yes.)​All those steps are a one time deal - they stick even after an SR.
This has been tested on htc universal and works great.
The screen will keep its orientation even if you flip your screen, take out your built in keyboard, or turn the device off and back on.
The only time your screen will revert back to the original orientation is when you soft reset your device.
Hope this helps
Click to expand...
Click to collapse

Confused Stu said:
My wife came up with a great solution when I had this problem (standard case causing phone to start in landscape) - turn the phone the other way round! Now I have the screen facing my belt and the phone is ALWAYS in portrait when I get it out.
Click to expand...
Click to collapse
It's also the way to receive less radiation in your body, because the GSM antenna is pointing away from your waist.
GldRush98 said:
It appears to be a magnetic switch...
Your case must have a strong magnet on it, I can't get it to effect the switch if the phone is completely closed. Only if I have it partially open.
Click to expand...
Click to collapse
I can, and I used a Tesla-meter to measure them:
in-between the two magnets of the case and the lid, there are around 150 mT (Millitesla) which is pretty much!
for comparison:
a usual horseshoe magnet would have 1 mT, the magnetic field of the earth has about 0,05 mT!

[Q] Auto Rotate not working as it is supposed to!

The following problem occurs only when i'm using non-sense ROM's.
The auto rotate feature is always on!
The lock screen, home screen, the phone screen etc etc always rotates. Even when I set it not to rotate on the home screen, it rotates!
The option for 0 degree, 90 degree all work fine. The sensors are also OK.
When i completely turn off the auto rotate it stops all right but it is not a solution as all apps like the gallery for instance also stops.
Currently I'm using BlackIce 1.25. This also occurs on Cyanogen, Oxygen (basically all Non-Sense roms)
MIUI and Sense dont seen to give me this issue.
Any ideas? Sorry if this has been posted before. If so please point me to the link before showering me with your blessings (read abuses)
Edit: I should tell you guys that i also have a problem regarding the phone call going to speaker phone automatically! Might be that the 2 of them are connected... any ideas please!

no one?? please... some one!!!

dhussa said:
no one?? please... some one!!!
Click to expand...
Click to collapse
This is the way CM roms are made to work. Auto rotate is supposed to work as one setting across the whole system. Sense stops it from doing it in Sense apps.

I think I know what you mean, could you explain better to make sure it's also my issue?
I've had weirdness where I could tell cm that I want 0, 90, 180, and 270 to be available for screen rotation, while having auto rotation set to off.
The screen would rotate regardless of my selection, unless I unselected 90, 180 and 270...
Sent from my Desire HD using XDA App

zelendel said:
This is the way CM roms are made to work. Auto rotate is supposed to work as one setting across the whole system. Sense stops it from doing it in Sense apps.
Click to expand...
Click to collapse
so the setting in adw launcher of the home screen orientation is over-ridden by the cyanogen mod setting???
any way i can change this maybe? it gets kind of irritating when the lock screen and home screen rotate when i expect them not to.

dhussa said:
so the setting in adw launcher of the home screen orientation is over-ridden by the cyanogen mod setting???
any way i can change this maybe? it gets kind of irritating when the lock screen and home screen rotate when i expect them not to.
Click to expand...
Click to collapse
zelendel said:
This is the way CM roms are made to work. Auto rotate is supposed to work as one setting across the whole system. Sense stops it from doing it in Sense apps.
Click to expand...
Click to collapse
found out what the problem was... my calls went to speaker automatically.. my auto rotate didnt work properly.. screen kept on lighting up after every few minutes... all hell broke loose...
Also, the earphones (stock) gave a kind of a current whenever in a call/playing music!!
Gave my phone a few days of rest.. then changed my usb cable... got one that doesn't move.. as in the slot is of a perfect size so that my port and the connectors dont move...
Problem solved.. my phone works like a brand new one! (well better coz it's rooted.. ) no issues whatsoever!

[Q] Gyro sensor not working

I've just discovered that my gyro sensor doesn't work. I am running rooted stock 4.1.1. The phone can not detect tilt movements. And under Settings->Motion->Sensitivity settings->Gyroscope calibration, the blue dot does not move from the center, no matter which orientation the phone is held. All of the options under Motion don't seem to work. I just want to see if anybody else has the same problem before calling TMobile.

Firstly, this should have been posted in the q&a section.
And the blue circle isn't supposed to move. You lay the phone on a flat surface and it calibrates itself.
Sent from my SGH-T999 using Tapatalk 2

Moved to Q&A

Sorry for posting in the wrong section. You are right about the blue dot not moving. I downloaded a few apps that detect sensors and all built-in sensor seem to be working as they are supposed too. I have problem for example of taking screenshot with a palm wipe or zooming picture by tilting the device, muting phone by turning it over, etc. None of these features work on my phone. Will try to explore more to see what the real problem is.

tphone said:
Sorry for posting in the wrong section. You are right about the blue dot not moving. I downloaded a few apps that detect sensors and all built-in sensor seem to be working as they are supposed too. I have problem for example of taking screenshot with a palm wipe or zooming picture by tilting the device, muting phone by turning it over, etc. None of these features work on my phone. Will try to explore more to see what the real problem is.
Click to expand...
Click to collapse
Do you have the switch turned on next to motion in the settings?
Sent from my SGH-T999 using Tapatalk 2

tphone said:
I've just discovered that my gyro sensor doesn't work. I am running rooted stock 4.1.1. The phone can not detect tilt movements. And under Settings->Motion->Sensitivity settings->Gyroscope calibration, the blue dot does not move from the center, no matter which orientation the phone is held. All of the options under Motion don't seem to work. I just want to see if anybody else has the same problem before calling TMobile.
Click to expand...
Click to collapse
Before you go off the deep end, run the test on the sensor.
in the stock dialer:
Quick Test Menu
*#7353#
select the accelerometer tester and ilt the phone whatever way you want. If the arrows don't change, then the sensor isn't working. If the Arrows do change, then all good, no panic necessary...
Good Luck
Aloha

Thank you for your help. I ran the sensor test and the sensors work. I also turned on the Motion switch but the Motion features still don't work for me. Maybe this is a software issue. I will continue to explore and will report back if I've found something.

tphone said:
Thank you for your help. I ran the sensor test and the sensors work. I also turned on the Motion switch but the Motion features still don't work for me. Maybe this is a software issue. I will continue to explore and will report back if I've found something.
Click to expand...
Click to collapse
Hi,
Please do the following:
Pull the top notification bar down by using a downward swipe.
Tap on the Toothed Wheel in upper right corner
scroll down till you see the System divider (below the Add account line)
is Motion ON on the right side of it? if not, turn it on.
Tap on the word Motion
Are any of the options you want to use set with a check in the box?
if not, put the check in whatever you want to use by tapping on the box on the right of the function.
Example:
If you want to use Palm swipe for screen captures, tap on the box on the right of the option.
the boxes toggle these options so if you want the option off, then tap on the checkmark and it'll go off.
When you're done, click on the back button on the right side of the menu bar below the screen till you get back to the homescreen.
You are done, and the selected options should now function.
simple huh?

Thank you, bobolinko. I've been doing exactly what you described and no motion feature works for me. I begin to think that my software has a problem, because it does crash occasionally and software upgrade check hangs forever in the "checking for software updates..." screen and never comes back, no matter if I am on wifi or on 4G. Let me reinstall stock firmware and report back.

Try it like this:
http://www.youtube.com/watch?v=T4dPoY1Z6hc
Also, has it EVER worked?
Thanks!

bobolinko said:
Also, has it EVER worked?
Click to expand...
Click to collapse
Thanks for the video. I did exactly as shown and nothing happens. I never tried Motion before until I needed to capture my screen and discovered that it doesn't work for me. In the mean time, using PWR and HOME button at the same time does allow me to capture the screen, so I don't really need Motion feature working for me. I am just thinking that my software has a problem and I will need to reinstall stock. Thanks a lot for your help in any case.

bobolinko said:
Before you go off the deep end, run the test on the sensor.
in the stock dialer:
Quick Test Menu
*#7353#
select the accelerometer tester and ilt the phone whatever way you want. If the arrows don't change, then the sensor isn't working. If the Arrows do change, then all good, no panic necessary...
Good Luck
Aloha
Click to expand...
Click to collapse
im having the same issue. tried the accelerometer test and tilt the phone every which way but the arror didnt move at all. does that mean the accelerometer is done with. any fix for it?
also tried tsp dot mode, tsp grid mode, proximity and light sensors and nothing seems to happen during the test

[Q] Touch to wake options

Like the Title says, can someone please add a Touch-To-Wake option.
We already have the Ambient Screen and Tilt To Wake Screen options that were introduced in the Android Wear 5.0 update, but for the life of me, I cannot understand why a Touch To Wake option was never included.
Having read through countless posts and threads on the net, it seems to not only be mine but everybody else's bane of their Android Wear experience. It would have to be THE most requested option in the history of Android Wear.
I realize there is Theater Mode, but this just isn't good enough.
We want to be able to have notifications pushed to the watch, we want to have the Vibrate when a notification comes through, we want to be able to tilt/flick the wrist to have the watch turn on........what we don't want is the watch turning on every time it touches a part of your body. It is especially annoying if you are sitting on a table with your arms crossed, or even sitting in a car with your arm crossed over and the screen touches your leg.
Please Please Please add this option in the official Moto360 ROM and release it yesterday.

TRLOS said:
Please Please Please add this option in the official Moto360 ROM and release it yesterday.
Click to expand...
Click to collapse
1) It's already there. Everything you mentioned is already in the stock ROM.
2) Wrong section
3) Release it.... Yesterday?
4) Don't beg people to do things then tell them when you need it done by - it's not your work, it's none of your business when it gets completed.
5) I have yet to see any other threads requesting tap to wake. (Perhaps because it's already there?)

r3pwn said:
1) It's already there. Everything you mentioned is already in the stock ROM.
Click to expand...
Click to collapse
And where would the Touch-to-wake option be exactly ?

I think he wants to be able to turn Touch-To-Wake off.

JimSmith94 said:
I think he wants to be able to turn Touch-To-Wake off.
Click to expand...
Click to collapse
Was my post not clear enough to begin with ?

TRLOS said:
Was my post not clear enough to begin with ?
Click to expand...
Click to collapse
Your OP said you want to add it, not disable it.

JimSmith94 said:
Your OP said you want to add it, not disable it.
Click to expand...
Click to collapse
Oh, I do apologize.
I meant I wanted to option added so you can turn it off.

TRLOS said:
Oh, I do apologize.
I meant I wanted to option added so you can turn it off.
Click to expand...
Click to collapse
Oh. Ignoring the first and last things I mentioned, all of the others still apply, though.

Putting it in theater mode is that bad? Only pressing the button turns it on I use it when I know I am not gonna be able to look at it or I need to take it off so it just stays "asleep"just have your phone vibrate and then you can wake your watch as you please
Sent from my SHIELD Tablet using Tapatalk

ben.nesheim said:
Put it in theater mode is that bad? Only pressing the button turns it on I use it when I know I am not gonna be able to look at it or I need to take it off so it just stays "asleep"
Sent from my SHIELD Tablet using Tapatalk
Click to expand...
Click to collapse
Yes it is.
Theatre mode doesn't wake the screen up when you rotate the watch.
It doesn't vibrate when a notification comes through.
I would like to have all the features available when the watch is in its normal mode......but without the touch-to-wake option turned on.

TRLOS said:
Oh, I do apologize.
I meant I wanted to option added so you can turn it off.
Click to expand...
Click to collapse
Its called theater mode....
You could always just compile your own kernel and remove the function. It honestly wouldn't be that hard. It would just take some research. If you want me to point you in the right direction, I can, but forewarned, it will require some possibly heavy learning depending on your current level.

npjohnson said:
Its called theater mode....
You could always just compile your own kernel and remove the function. It honestly wouldn't be that hard. It would just take some research. If you want me to point you in the right direction, I can, but forewarned, it will require some possibly heavy learning depending on your current level.
Click to expand...
Click to collapse
Yeah, hence why I put this post into the Original Android Development thread. An option like this should be made a standard on all Android Wear devices, especially the Moto360.
I wouldn't have the faintest idea about compiling a kernal and to be honest, have no intention of rooting/modifying my Moto360 (even though I do it for all my phones).
All I wanted was to request that this option be made available, hopefully for the next Android Update because there are a great number of people who are having the same issues I am. Honestly, it is the only option I wished I had since the first time I turned the watch on.

TRLOS said:
Yes it is.
Theatre mode doesn't wake the screen up when you rotate the watch.
It doesn't vibrate when a notification comes through.
I would like to have all the features available when the watch is in its normal mode......but without the touch-to-wake option turned on.
Click to expand...
Click to collapse
I don't understand why this is so hard. This is such a stupid over site in wear.

-RioT- said:
I don't understand why this is so hard. This is such a stupid over site in wear.
Click to expand...
Click to collapse
It is THE most frustrating thing ever. There come times when I want to throw it at a brick wall.
Would someone please get this fixed.

TRLOS said:
It is THE most frustrating thing ever. There come times when I want to throw it at a brick wall.
Would someone please get this fixed.
Click to expand...
Click to collapse
I understand that sometimes there are things we may not like BUT this seems like it should be such an easy damn fix.
I know when I'm sleeping this screen goes on and off all night. My arm hits my other arm or whatever... I toss and turn a lot.

I totally agree. I must have this option. No more tap to wake. I like tilt to wake but tap to wake activates on accident all the time. Can't find a solution.

How on earth does touch to wake constantly happen accidently but tilt to wake does not?

JeffMD said:
How on earth does touch to wake constantly happen accidently but tilt to wake does not?
Click to expand...
Click to collapse
The tilt to wake works by the gyro sensor. It just means you might need to give your wrist a bit of a flick to turn the screen on.
What i don't understand is the touch to wake would have to be the most annoying thing for all wearable, and yet the developers refuse to put in the option to turn it off.
even in the upcoming update, there is no mention of including that option.

TRLOS said:
The tilt to wake works by the gyro sensor. It just means you might need to give your wrist a bit of a flick to turn the screen on.
What i don't understand is the touch to wake would have to be the most annoying thing for all wearable, and yet the developers refuse to put in the option to turn it off.
even in the upcoming update, there is no mention of including that option.
Click to expand...
Click to collapse
You mis understood my statement. I was asking how one could find the touch to wake annoying but NOT the tilt to wake. As it is.. I am actually using it just as you describe. I have tilt to wake off and then I can just touch the screen to turn it on. I don't like the tilt to wake on the moto 360, I much prefered pebbles wrist flick to wake up. As for touch to wake, I am not sure why this would be a problem, what is touching your watch that keeps turning it on?

Tilt to wake isn't that much of an issue for me. I actually like it the way it is.
As for the touch to wake; you name it, it's annoying.
- Crossing your arms while sitting at a table
- sitting in the car with your hand on your leg (or between your knees)
- walking past someone and having their hand brush across yours (and accidentally touching the watch)
- crossing your arms
It's not enough that it just turns on but what add to the frustration is that if you aren't cautious, the Google Speak function kicks in and starts doing all sorts of crazy stuff on your phone

Any way to disable the proximity sensor?

I'm having issues with the screen not turning back on after a call or even listening to audio messages. I have to relock and then unlock to get it to work, very annoying.
I'm on 8.1, on magisk with xposed.
Could someone recommend me an app or a module?

https://issuetracker.google.com/issues/71510515
You along with a bunch of us... ota messed it up

Good to know, I'm not the only one. Doesn't seem related to screen protector.
Really wish I can disable the proximity sensor for now.

I guess I came to the wrong thread. I don't have any issues like that or at least I don't notice it because I is the power button to turn the screen in/off all the time and I set my lock screen to not relock the phone for 5 minutes or something like that. That way I don't gotta enter my unlock code. There also is a setting which is supposed to keep your phone unlocked as long as you don't set it down. There also is a setting that keeps your phone from locking if you are within range of a Bluetooth (headseat maybe) device. I dunno try some of those options maybe you won't need to type your code in as much.
Personally I came here because I am looking for a way to completely disable my proximity sensor. I absolutely hate them on all phones. How stupid is it that they put the proximity sensor I right up next to where you have to put your hand if you want to pull down the menu bar??? It's like I go to pull down the menu bar - screen off. ****! Power button, slide open the lock screen (no code needed). Pull menu bar - screen off ****! Power.... Slide....menu bar - screen off. Of course it only does that during calls however that's a pretty annoying time because you're usually focused on other things and not wanting to **** with the screen going on and off.
Who the needs a proximity sensor to detect one's face anyway? I just click the power button every time I put the phone to my ear. Any time I don't do that, I run the risk of my cheek pressing the mute button for the 9000th time in my life. I do love Android though.

KirkH420 said:
I guess I came to the wrong thread. I don't have any issues like that or at least I don't notice it because I is the power button to turn the screen in/off all the time and I set my lock screen to not relock the phone for 5 minutes or something like that. That way I don't gotta enter my unlock code. There also is a setting which is supposed to keep your phone unlocked as long as you don't set it down. There also is a setting that keeps your phone from locking if you are within range of a Bluetooth (headseat maybe) device. I dunno try some of those options maybe you won't need to type your code in as much.
Personally I came here because I am looking for a way to completely disable my proximity sensor. I absolutely hate them on all phones. How stupid is it that they put the proximity sensor I right up next to where you have to put your hand if you want to pull down the menu bar??? It's like I go to pull down the menu bar - screen off. ****! Power button, slide open the lock screen (no code needed). Pull menu bar - screen off ****! Power.... Slide....menu bar - screen off. Of course it only does that during calls however that's a pretty annoying time because you're usually focused on other things and not wanting to **** with the screen going on and off.
Who the needs a proximity sensor to detect one's face anyway? I just click the power button every time I put the phone to my ear. Any time I don't do that, I run the risk of my cheek pressing the mute button for the 9000th time in my life. I do love Android though.
Click to expand...
Click to collapse
So it works too well for you with your finger but not enough for your face to prevent muting? LOL. Sorry never had that problem. I just avoid the middle if I had to get to the notifications during a call.

It happens often when I'm trying to toggle BT because my BT icon is directly under it.... For example. Anyway, I don't find it useful to even have an proximity sensor. That's why I stumbled in here, my search query was the exact title. I'm not really experiencing the problem the others were talking about though....
EeZeEpEe said:
So it works too well for you with your finger but not enough for your face to prevent muting? LOL. Sorry never had that problem. I just avoid the middle if I had to get to the notifications during a call.
Click to expand...
Click to collapse

xringo said:
I'm having issues with the screen not turning back on after a call or even listening to audio messages. I have to relock and then unlock to get it to work, very annoying.
I'm on 8.1, on magisk with xposed.
Could someone recommend me an app or a module?
Click to expand...
Click to collapse
It's an option to disable proximity in gravitybox.
Sent from my Pixel 2 XL using XDA Labs

KirkH420 said:
I guess I came to the wrong thread. I don't have any issues like that or at least I don't notice it because I is the power button to turn the screen in/off all the time and I set my lock screen to not relock the phone for 5 minutes or something like that. That way I don't gotta enter my unlock code. There also is a setting which is supposed to keep your phone unlocked as long as you don't set it down. There also is a setting that keeps your phone from locking if you are within range of a Bluetooth (headseat maybe) device. I dunno try some of those options maybe you won't need to type your code in as much.
Personally I came here because I am looking for a way to completely disable my proximity sensor. I absolutely hate them on all phones. How stupid is it that they put the proximity sensor I right up next to where you have to put your hand if you want to pull down the menu bar??? It's like I go to pull down the menu bar - screen off. ****! Power button, slide open the lock screen (no code needed). Pull menu bar - screen off ****! Power.... Slide....menu bar - screen off. Of course it only does that during calls however that's a pretty annoying time because you're usually focused on other things and not wanting to **** with the screen going on and off.
Who the needs a proximity sensor to detect one's face anyway? I just click the power button every time I put the phone to my ear. Any time I don't do that, I run the risk of my cheek pressing the mute button for the 9000th time in my life. I do love Android though.
Click to expand...
Click to collapse
Who needs a proximity sensor? Really? You basically answered your own question. To turn off the screen when you put it to your face so that your face doesn't press anything on the screen. Having to press the power button every time you put the phone to your face and then press it again every time you take it away from your face would suck.

jimv1983 said:
Who needs a proximity sensor? Really? You basically answered your own question. To turn off the screen when you put it to your face so that your face doesn't press anything on the screen. Having to press the power button every time you put the phone to your face and then press it again every time you take it away from your face would suck.
Click to expand...
Click to collapse
I always use speaker or bluetooth and proximity sometimes turns the phone off spuriously so I disable it.
Sent from my Pixel 2 XL using XDA Labs

Yeah.....no basically pressing the power button is where it's at. It the again I'm not one who likes everything done for me. Absolutely NO PHONE I've ever owned has had a proximity sensor that was worth a ****. They all, at one time or another, allow the screen to wake up subsequently letting the microphone mute button to enable. The mute button is another piece of Android trash that needs redesigning. It is not often that mute is needed so why not out that in a drop-down menu or something since it inevitably gets pressed during calls due to a ****y proximity sensor and Screen wake setup.
I also drive a manual transmission car. Actually the last 5 cars I've owned have been manual shifted. When YOU are in 100% control of your devices, there are certain niceities which are otherwise unavailable. But that's only if you're the type who doesn't gotta have everything done for them.
As far as you go buddy, if you like the proximity sensor that's fine. Personally I don't ****ing care what you like. thanks for a wasted Fred post which contacted my email to have me come back here to tell you what a waste of time that was thanks.
jimv1983 said:
Who needs a proximity sensor? Really? You basically answered your own question. To turn off the screen when you put it to your face so that your face doesn't press anything on the screen. Having to press the power button every time you put the phone to your face and then press it again every time you take it away from your face would suck.
Click to expand...
Click to collapse

KirkH420 said:
Yeah.....no basically pressing the power button is where it's at. It the again I'm not one who likes everything done for me. Absolutely NO PHONE I've ever owned has had a proximity sensor that was worth a ****. They all, at one time or another, allow the screen to wake up subsequently letting the microphone mute button to enable. The mute button is another piece of Android trash that needs redesigning. It is not often that mute is needed so why not out that in a drop-down menu or something since it inevitably gets pressed during calls due to a ****y proximity sensor and Screen wake setup.
I also drive a manual transmission car. Actually the last 5 cars I've owned have been manual shifted. When YOU are in 100% control of your devices, there are certain niceities which are otherwise unavailable. But that's only if you're the type who doesn't gotta have everything done for them.
As far as you go buddy, if you like the proximity sensor that's fine. Personally I don't ****ing care what you like. thanks for a wasted Fred post which contacted my email to have me come back here to tell you what a waste of time that was thanks.
Click to expand...
Click to collapse
Relax. It's not that serious.
Sent from my Pixel 2 XL using Tapatalk

No man, the point is that you quoted me so that I would be alerted to your message but didn't even attempt to input anything useful to the conversation. My post is actually a request, with explaination, asking if there is a way to do something. You on the other hand made a comment. This is XDA Developer's Forum. This isn't Facebook or YouTube where everyone has some smartass **** they can't resist saying. We is this for information. So again, thanks for your Nothing input.
EeZeEpEe said:
Relax. It's not that serious.
Click to expand...
Click to collapse

KirkH420 said:
No man, the point is that you quoted me so that I would be alerted to your message but didn't even attempt to input anything useful to the conversation. My post is actually a request, with explaination, asking if there is a way to do something. You on the other hand made a comment. This is XDA Developer's Forum. This isn't Facebook or YouTube where everyone has some smartass **** they can't resist saying. We is this for information. So again, thanks for your Nothing input.
Click to expand...
Click to collapse
I quoted you because you're so upset people don't agree with you that you can't express your frustration withOUT asterisk words. You got your answer:
"It's an option to disable proximity in gravitybox."
Move along.
Sent from my Pixel 2 XL using Tapatalk

Sure that's fine, be one of those snide Facebook commenters always gotta add their smartass quip or opinion like it's an itch you can't help but scratch. I just think it's pathetic that you get some kind of satisfaction out of that. But..... you know, everybody needs to feel like they make an impact in the world. Have a fufulling life. ?
EeZeEpEe said:
I quoted you because you're so upset people don't agree with you that you can't express your frustration with asterisk words. You got your answer:
"It's an option to disable proximity in gravitybox."
Move along.
Click to expand...
Click to collapse

.
So I assume you have earbuds, or if not, you can get some really cheap earbuds from the gas station, and when needed, you can plug it in, and it will register that it has earbuds in and will light up again, disabling the proximity sensor. You can leave it in as well, until you need it to talk, unless it will work while calling. This should work, I haven't personally tried it.

Solution
xringo said:
I'm having issues with the screen not turning back on after a call or even listening to audio messages. I have to relock and then unlock to get it to work, very annoying.
I'm on 8.1, on magisk with xposed.
Could someone recommend me an app or a module?
Click to expand...
Click to collapse
Hi,
Hope you managed to solve the issue.
If you haven't then
1. Install sensor disable from xposed repo. It's an old app so there are a few bugs when you try to remove the sensor as such.
2. Buy the Pro version or use lucky patcher to disable in app purchases for Sensor Disabler.
3. Go to the settings of Sensor Disabler and blacklist the apps that you don't want the proximity to work on.(I had problems with my WhatsApp. But it works perfectly now.)