Hello,
I have a problem with my Note 2.
I tried to flash newest Perseus with MobileOdin, but it stucked at "Booting into Recovery"... I rebooted it manually, it worked fine with old kernel.
Now I rebooted into CWM recovery to flash Perseus, but no boot into CWM, stucked at Samsung logo!
I flashed with Odin Perseus.tar, but it keeps stuck there...
Any ideas??
Thank you
MojoManagement said:
Hello,
I have a problem with my Note 2.
I tried to flash newest Perseus with MobileOdin, but it stucked at "Booting into Recovery"... I rebooted it manually, it worked fine with old kernel.
Now I rebooted into CWM recovery to flash Perseus, but no boot into CWM, stucked at Samsung logo!
I flashed with Odin Perseus.tar, but it keeps stuck there...
Any ideas??
Thank you
Click to expand...
Click to collapse
Find and flash Rescue ROM, NOT LL7. Flash it through download mode without PIT and wait till your phone boots.
sent from my Note II using Tapatalk
MojoManagement said:
Hello,
I have a problem with my Note 2.
I tried to flash newest Perseus with MobileOdin, but it stucked at "Booting into Recovery"... I rebooted it manually, it worked fine with old kernel.
Now I rebooted into CWM recovery to flash Perseus, but no boot into CWM, stucked at Samsung logo!
I flashed with Odin Perseus.tar, but it keeps stuck there...
Any ideas??
Thank you
Click to expand...
Click to collapse
use odin flash cwm again
Yeah, I reflashed CWM and then old RedPill, it works again...
Thank you both
Related
Hey guys,
I seriously screwed up my Note (T889). I installed the latest nightly of cm10.1, but it got stuck in a boot loop. I pulled the battery and tried to boot into cwm, but it would only boot into download mode or the loop. I tried to use odin to flash cwm back onto the phone, which seemed to work (I could boot into cwm once). While in cwm I did a factory reset and then rebooted the phone. Now when I turn it on it sits on the screen that says Samsung Galaxy Note 2 for a while then goes black, nothing else. I can boot into download mode, but I can't boot into cwm or the stock recovery any more. I tried using odin to flash cwm again from download mode, but I still can't boot into anything else.
I really just want my phone to be usable again right now, so if anyone can help me out at all I would really really grateful, thanks!
I've read this thread which seemed similar, but unless I'm doing something wrong my problem seems to be slightly different: http://forum.xda-developers.com/showthread.php?t=2034323
Flash TWRP then flash a aosp kernel.
this is XXXDDDAAA
Thank you so much, it's back to stock now!
Hi,
I am trying to root my friend's Grand and successfully flashed PhilZ Recovery. From it I flashed SuperSu 1.65 zip. It flashed successfuly but after reboot got stuck at black screen. Tried wiping data too. Many times.
What to do ?
Thanks !
silentvisitor said:
Hi,
I am trying to root my friend's Grand and successfully flashed PhilZ Recovery. From it I flashed SuperSu 1.65 zip. It flashed successfuly but after reboot got stuck at black screen. Tried wiping data too. Many times.
What to do ?
Thanks !
Click to expand...
Click to collapse
remove battery and try again. 2] if you updated from ota this problem occurs. update from odin stock rom and then root no problem
So i tried flashing back to stock from PA 3.99 RC2 via odin this morning and am now stuck in a bootloop at the samsung logo. I flashed LK4 via odin, Odin said the flash was a success and the device rebooted but won't go past the samsung logo. I'm capable to get into download mode but not into the stock recovery. I have tried flashing LK4 3 times and each time i get the same issue. My GS3 is from rogers.
UPDATE: Managed to final get into stock 3e recovery, from there did a wipe date/factory reset and phone booted up just fine. Sorry for this post, if mods feel the need to delete it go ahead.
Hello, this will be my first post here at XDA, and i will be asking for your help guys...
I am experiencing bootloop on my phone.
The thing is I tried to install Xposed Installer using the Automatic method that flashes to the recovery.
It reboots them...
It passed the Galaxy Note II N7100 black screen...
It shows the TWRP logo (The blue one)
AND THEN IT JUST REPEAT AND REPEAT the TWRP logo.
I can boot to Download Mode.
Tried removing the battery and tried to enter recovery again using hardware keys, same thing happens.
What can I do now? Please Help.
Thank You!
P.S. I am running DN3 4.3 Stable using it's stock kernel.
sgtfrnz said:
Hello, this will be my first post here at XDA, and i will be asking for your help guys...
I am experiencing bootloop on my phone.
The thing is I tried to install Xposed Installer using the Automatic method that flashes to the recovery.
It reboots them...
It passed the Galaxy Note II N7100 black screen...
It shows the TWRP logo (The blue one)
AND THEN IT JUST REPEAT AND REPEAT the TWRP logo.
I can boot to Download Mode.
Tried removing the battery and tried to enter recovery again using hardware keys, same thing happens.
What can I do now? Please Help.
Thank You!
P.S. I am running DN3 4.3 Stable using it's stock kernel.
Click to expand...
Click to collapse
Well something was messed up when you flashed xposed installer( i don't know what you mean by automatic method) but do a clean install,since you can get into download mode,grab the twrp img.tar and flash it using pc odin ,then you can access recovery, do all the wipes again by going under "advanced" and reflash your rom.Now to install xposed go to xda thread for it and grab the apk from there (i think it's available on play store as well).You should have no more issues
Twrp
Like the previous post said I'm not sure what you've done. When xposed framework is installed there is usually an unistall zip created on the internal so card. If you can get recovery find it and flash it
Sent from my GT-N7105 using Tapatalk
The device is now fixed.
So okay, I followed the above instruction to flash a fresh TWRP. It does not work that way, it still has bootloop on the blue teamwin screen, what i've done is flash a .tar Philz specified for my device and then try to boot it. It boot and then it then flashes the pending Xposed script/flashable that I think TWRP can't execute that's why it bootloop. When it CWM successfully flashed it, I boot and wen't to homescreen. Then I now flashed TWRP via odin.
Thanks everyone, my Note 2 has come back to life.
sgtfrnz said:
So okay, I followed the above instruction to flash a fresh TWRP. It does not work that way, it still has bootloop on the blue teamwin screen, what i've done is flash a .tar Philz specified for my device and then try to boot it. It boot and then it then flashes the pending Xposed script/flashable that I think TWRP can't execute that's why it bootloop. When it CWM successfully flashed it, I boot and wen't to homescreen. Then I now flashed TWRP via odin.
Thanks everyone, my Note 2 has come back to life.
Click to expand...
Click to collapse
Boot into Download mode and flash philsz touch recovery 6 and reboot device .. Everything will be ok>
Old thread may be old, but it's still relevant.
I just tried to install XPosed as well on my Note II and it did the same thing (mine's AT&T)
Info
Device: Note II
XPosed Version: 2.6.1
Install Method: "Recovery (flash zip automatically)"
Recovery Image: TWRP
Mine exhibited the same behavior as OP's, however after leaving it alone for a while to bootloop recovery as much as it wanted to, I came to my laptop, found this post, grabbed as USB cable, and I was just about to start the process of reflashing recovery when all of a sudden I saw my lock screen.
It took roughly five minutes of bootloop to get it there, but it successfully installed XPosed and my device is running fine.
So, for all the other Googler's out there that landed on this post, leave it alone for a while! See what happens. If it's still bootlooping, like, 30 minutes later, then try reflashing TWRP using ODIN. If that still doesn't work, reflash a new ROM using TWRP.
I installed [4.4.2][27.07.14]Dr.Ketan Custom ROMV8.1 N3 & S5 Features MultiDPI - Goodbye edition., then flashed the ND3 bootloader via odin. It showed success but the phone is not booting and is stuck on the Samsung GALAXY Note II Screen and is not going past it. I then flashed the stock kitkat ND3 recovery. It showed success but phone didn't boot up. I then re-installed the ND3 bootloader, odin again showed success, but still no booting up.
Now i dont have access to any recovery. All I can do is to enter download mode.
What step am i missing out? Please help gentlemen.
Sidz4u said:
I installed [4.4.2][27.07.14]Dr.Ketan Custom ROMV8.1 N3 & S5 Features MultiDPI - Goodbye edition., then flashed the ND3 bootloader via odin. It showed success but the phone is not booting and is stuck on the Samsung GALAXY Note II Screen and is not going past it. I then flashed the stock kitkat ND3 recovery. It showed success but phone didn't boot up. I then re-installed the ND3 bootloader, odin again showed success, but still no booting up.
Now i dont have access to any recovery. All I can do is to enter download mode.
What step am i missing out? Please help gentlemen.
Click to expand...
Click to collapse
Which recovery are u using ?
Try phillz 6.26 n then report back
Sent from my GT-N7100 using Tapatalk
I had philz 6.26 previously, then i flashed stock recovery via odin, then i again flashed philz 6.26 via odin, but i cant access recovery by the Vol UP+Home+Power combination.
i installed dr. ketan's v8.1
booted in.. it was working fine..
but as i was on older bootloader (MC3), i had wifi issue and phone not charging when phone switched off.
so i decided to flash ND3 bootloader.
i flashed it via odin, it showed success, rebooted the device but it didnt go past the Galaxy Note II startup image.
i had then read somewhere that flashing the stock ND3 bootloader recovery, the bootloader gets flashed properly,
but even then i couldnt get it to boot, and i had lost philz 6.26 recovery as well, which i anyways couldnt access to even earlier.
i then flashed philz recovery 6.26 again, but still cant get access via the 3 button combo.
so now, the 4.4.2 rom is presently installed, and i cant get the phone to boot. i can only make it enter download mode.
i tried to flash an old 4.1.2 firmware but that failed, and required a PIT file i suppose, which i dont have.
so thats all the problem.
Guys any help from from anyone will be highly appreciated.