Develop Bugs

N7000 Replenishment Screen

Hello guys,
10 minutes ago my galaxy note N7000 screen cracked in my pocket.
So I need to buy a replenishment screen from Samsung but I simply can't find stores that supplies replenishment parts for it. Do anyone knows where to buy a new Amoled LCD screen for galaxy note ?
Thank you and best regards,
Amid

ebay, took 5 days to ship from HK to NYC. Follow youtube guide in opening the note and use blow dryer/heat gun to loosen the sceen, wedge open with something sharp and slowly tear back the screen gently. You will need the old Wacom sensor from the broken screen so becareful to not to rip it. There is guide in the general section. I broke mine 2 weeks ago and replaced it in a hour. take your time you can get it done.

Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.

amidsal said:
Thanks man. Just to be sure, the price is about US$ 230,00 for it ? i am not sure if I am looking for the right spare part.
Click to expand...
Click to collapse
I think this is what you are looking for:
http://www.ebay.com/itm/S-Black-Dig...087?pt=LH_DefaultDomain_0&hash=item2c65951cd7

I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards

amidsal said:
I can try but I don´t think this will help the problem. The screen doesn´t show any images anymore, looks like a broken LCD. When you press it, a lot colors appears around it. Do you believe this is the one I need ?
Thank you and best regards
Click to expand...
Click to collapse
Hmmm no, in that case you will need the 200ish one.

You will need the entire setup, glass, LCD, and Touch. Does not come with Wacom sensor. Looking around you can get them for 230-260. Look for delivery, that makes a huge difference, especially with your phone out of commission.
This is the guy I purchased mine from, but I panic and purchase the first one I saw. If you do some research you will find cheaper, but I got min in 5 days. So I am glad this guy came thru. Good luck, its going to stress you out a bit when you have to remove the screen from the front panel, they are glued on so take your time. Looks like your LCD broke so it is going to crack and shatter further so make sure you do it in area where it is easy to clean. If you look at the front panel after you remove it, you will see one wire that does not come with the replacement one, that is for the wacom sensor, so be careful and don't damage that part, you will need to peel it off and place it back on to the replacement lcd, otherwise your s-pen won't work. It's been 2 weeks, my phone is going strong and no sensor or sceen issues. You should get a more protective case, since you probably already blew close to ~$1000 on this phone by now. I have a casemate, otterbox commuter looks like a good one. Once again good luck, you can do this.

Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.

The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847

Well mine looks brand new, must be the workmanship ;-P But why flame my advise when he is going to need to do it anyways, the screen is completely useless, as was mine. Why don't you keep your assumption to yourself in how it will look or if he is going to ruin the device. If he decides that he would rather live with a crack screen or someone who is willing to do it, there really isn't much options here. What's up with such negative attitude here. Just trying to show him that it can be done.
---------- Post added at 04:30 PM ---------- Previous post was at 04:26 PM ----------
jusutus said:
The correct part looks like this, for example: http://pages.ebay.com/link/?nav=item.view&id=320843198847
Click to expand...
Click to collapse
Look at the delivery time. I got mine in 5 days. just talked to the seller.

Replacement screen with 2 connectors
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!

Leo.F said:
Hello!
First of all I would like to say Thank you for all the resources provided in this forums!
Could someone please help me to find a replacement screen for the International version of the Galaxy Note GT-N7000 with 2 connectors? This phone has the physical home button. All the replacements that I've been able to find have just the first connector. I tried to post a photo hoping to help better explain it, but I can't do it yet.
Thank you in advance for your cooperation!
Click to expand...
Click to collapse
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.

s.magus said:
Hello, I have got repaired my GN in Samsung service (Slovakia) for 165 €. I have had the same problem. I think, that should be the best way.
Click to expand...
Click to collapse
Thank you s.magus! I would love to go that route, but I'm in Venezuela, and Samsung is selling the GN, but does not yet have replacement parts. You're right, that will be the best way.

n7000 replenishment screen
hello jignesh here .... i hav note gt n7000 ... it working 100% normally ... just cracked screen or glass or lcd ... i dont know what is problem .... can u tell me what is the problem .... glass cracked or screen cracked or lcd cracked ???? how can i find problem ???? touch and everything is working perfectly as like new note .... i already using note since 1month ... but now i want to repair it ... so what can i do ??? just change the front glass or change lcd ??? please reply me ....

Where is the cheapest part in uk?

is there anyone in India who could tell the price of galaxy note's white screen touch (not the lcd screen).Thanks in advance....:good:

I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2

baz77 said:
I can recommend this site, they send working usb module
http://www.parts4repair.com/.
They have other parts also
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
SUPER NICE !!!!
After a search for 5 days ... This one is the best !!!
THNX baz77

your welcome, hope you fix yer stuff and be carefull electronics is delicate stuff
Sent from my GT-N7000 using Tapatalk 2

i disagree
Hi ,
I think Senior member Justis is right... many of us dont want to do a full screen replacement for 220$...when we can just remove the front screen for 20$..many have done this method successfully... U just need to watch a lot of youtube videos on this and be careful/delicate with the procedure... its possible.
So i dont think what he said was a waste.. Pls keep such remarks to yourself.. He was not wasting anyones time.
Infact you are wasting my time making me read your message and give u a reply.
You know what...im doing a screen replacement too... thats what guys do first. njot jump in and do a full replacement for 220 $.:good::good::good:
jusutus said:
Please stop advising people to do something that is not meant to be done and can possibly damage their phone even more. And most likely look completely rubbish when assembled.
The correct repair part is a complete display assembly including everything - the glass, digitizer, Wacom digitizer, AMOLED, bezel, frame abd home button. It costs around 260 dollars on eBay and is relatively simple to install. By installing the complete assembly you don't need to worry about separating the glass and AMOLED or about the Wacom digitizer, since they are all included. Just remove the screws, back housing and motherboard, disassemble the audio flex cable and front camera flex from the old display and put them into the new one. Most displays also require the old charger port flex and speaker module to be used.
Click to expand...
Click to collapse

Replacing Broken Glass

Hi all
I have a cracked screen on my Galaxy Nexus and want to replace it.
I know the digitizer is stuck to the glass but I've watched a video on YouTube and with a bit of time and patience it should come apart.
Has anyone successfully replace the glass and only the glass on the Galaxy Nexus?
I've seen some replacement glass on eBay for around $20 which doesn't seem too bad. But I want to know when you remove the old glass which would remove the glue holding the old glass on, do I need any glue to stick the new glass on and where would I find this so called glue?

I bought a used broken galaxy nexus off ebay that also has this issue and I am probably gonna try and fix it eventually. I ordered replacement glass off ebay for 15 dollars and its coming with little tools for the job aswell.

Did it come with stuff to stick the glass back on :s

I will probably pick it up on Monday so I can check then.
Sent from my Galaxy Nexus using xda app-developers app

I did the same thing. Found a nexus on ebay for 40 bucks with a cracked screen. Phone works perfect, I ordered replacement glass only and and I'm just way nervous to do it.
Sent from my Galaxy Nexus using xda premium

Any luck with this repair? It seems like there are people who say it can't be done and some who say it can. I've watched some videos on this topic as well but they never really show how to put the glass back on without getting air and dust trapped in between the digitizer and the glass.

chipzdelux said:
Any luck with this repair? It seems like there are people who say it can't be done and some who say it can. I've watched some videos on this topic as well but they never really show how to put the glass back on without getting air and dust trapped in between the digitizer and the glass.
Click to expand...
Click to collapse
I had the same issue with my Gnex, but after talking to private service guy,I replaced complete digitiser together with glass. The reason was simple.
As I get info from that guy, you will never be able to protect any dust to stay at digitiser area, so after some time phone will not recognise some touches,because of glue has to be used and it is not easy to cover complete area,that is why probably dust will come inside.
Anyway,those are informations I get from guy who is servicing/repairing all kinds of mobile phones, so this was his opinion and maybe there is better way,how to solve it.
I wish you good luck

It didn't come with glue .
I found this http://www.amazon.com/gp/product/B004WIQW3U/ref=oh_details_o00_s00_i00 which seems like the right thing to me.
Sent from my Galaxy Nexus using xda app-developers app

so did anyone successfully replaced the glass?
I found good deal in Amazon and not sure if this is going to work!

I have a broken GNex which I am willing to sell for parts... Anyone interested Pm me

sdhanush1 said:
I have a broken GNex which I am willing to sell for parts... Anyone interested Pm me
Click to expand...
Click to collapse
do you have an intact glass?

the.lirius said:
do you have an intact glass?
Click to expand...
Click to collapse
I had... Sold it already... I remember seeing one in eBay UK website you may want to try there.
Sent from my awesome Xperia Z

sdhanush1 said:
I had... Sold it already... I remember seeing one in eBay UK website you may want to try there.
Sent from my awesome Xperia Z
Click to expand...
Click to collapse
ty mate.. i will seriously think about it :good:

Any word on replacing the glass? I've been watching some videos about the process that includes everything except the regluing.
I found one video on the regluing process, but it shows the replacement in an industrial factory setting with an industrial autoclave vacuum to remove any air bubbles present.
I have also seen people on the YouTubes use 3mm wide double sided tape around the entire perimeter of the phone to reduce dust, but I can see potential issues with this method, as the factory method seems to apply a solid layer of adhesive material.
I would like to hear success stories, but I'm inclined to pop this thing open and give out a shot.
Sent from my Galaxy Nexus using Tapatalk 2

advise
sdhanush1 said:
I have a broken GNex which I am willing to sell for parts... Anyone interested Pm me
Click to expand...
Click to collapse
I thought the glue is not a must have parts,but samsung wont put the glue on without any reason. what i know about the glue is it will make ur glass much harder...

Screen replacement

Hey I just recently broke my screen and I bought my phone last july. Its not completely broken but its shattered most of the screen and its incredibly annoying. Is there anyway I could get a new phone or get a cheap screen replacement within 30-50$ range? Or should I just go ahead and get a new phone?
Sent from my SGH-I747 using xda premium

Tyler.Boston1 said:
Hey I just recently broke my screen and I bought my phone last july. Its not completely broken but its shattered most of the screen and its incredibly annoying. Is there anyway I could get a new phone or get a cheap screen replacement within 30-50$ range? Or should I just go ahead and get a new phone?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
If the digitalizer isn't damaged, replacing the glass only is cheap and easy. Look it up :good:

BWolf56 said:
If the digitalizer isn't damaged, replacing the glass only is cheap and easy. Look it up :good:
Click to expand...
Click to collapse
How would I tell if the digitilizer is broken? It may look just like the glass is broken. If I didn't have my screen protector on I'm pretty sure it would fall apart
Sent from my SGH-I747 using xda premium

Tyler.Boston1 said:
How would I tell if the digitilizer is broken? It may look just like the glass is broken. If I didn't have my screen protector on I'm pretty sure it would fall apart
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
If the screen usable? Any color/light bleed? Or color distortion/fading?

BWolf56 said:
If the screen usable? Any color/light bleed? Or color distortion/fading?
Click to expand...
Click to collapse
Oh ok well then its still working
Sent from my SGH-I747 using xda premium

Tyler.Boston1 said:
Oh ok well then its still working
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Check out this thread for replacing your screen
http://forum.xda-developers.com/showthread.php?t=1945494

I highly recommend against trying to replace just the glass. That is what I tried to do, but the LCD is glued to the digitizer which is glued to the glass. I didn't use enough heat and though I got through the edge tape holding the glass to the frame, I shattered the digitizer and LCD as well as busted through the menu buttons.
If you think you can do it, go for it. Not real tool intensive, but there will be lots of heat and the success rate is probably 50/50.
The next step from that is to replace the whole LCD/DIGITIZER/GLASS. But that will set you back around $200. Same process, but you pretty much scrape the glass, digitizer and LCD from the metal frame. Lots of effort, lots of time, and little pieces of glass flying everywhere.
For about the same price, get the FRAME/LCD/DIGITIZER/GLASS asssembly. It only requires removing a few screws, unhooking a couple of cables, and replacing the hole front end. It can be done with care in about 15 minutes.
If you do that, be sure you get the right model number. If you are on AT&T in the US, you'll need the i747. The i9300 may come up a few bucks less, but it's not compatible. Color doesn't matter - you can change now, if you want.
The biggest disadvantage of removing the glass only is the risk of getting dust inbetween the LCD and the glass front. With the other two methods, the LCD/DIGITIZER/GLASS are already fused together. However, if you pull it off, no one will ever know you messed with it, and the warranty cheat won't be tampered with as it will be with a frame replacement.
According to the other post, you are still 13 months from an upgrade. That means around $450 to replace your S3 and $630 if you want to go the S4. For less than half that, you can get the frame replaced. I might even suggest that once you replace the frame, you spend that $10 to replace the glass and try it without any fear of consequences on the one you remove. If you do it well, you might could sell that assembly for $150-$200.
Good luck!

i9300 screen (no frame) will fit i747 frame
can you advise if a i9300 screen (no frame) will fit i747 frame? Mine is 747, I can see lots of posts on Ebay for screens with both 9300 and 747 compatible. Want to make sure before order.

k2lc said:
can you advise if a i9300 screen (no frame) will fit i747 frame? Mine is 747, I can see lots of posts on Ebay for screens with both 9300 and 747 compatible. Want to make sure before order.
Click to expand...
Click to collapse
Lcd, digitizer, and glass are all identical except color. Once you see the word "frame", the model matters.

I just recently did this successfully. The key is a good source of heat and patience. I used a heat gun and it took me about thirty minutes to do. There are screens you can order that come with the little tools to use. Start heating it slowly and use the tools to take the glass off. Heat it until its relatively easy to get the glass off but do not over heat it! Keep going until all the glass is off. Once its off, apply some sticky tape (or you can use the tape that was already on the phone if you don't destroy it) and it will be good to go. Make sure that you take the protective paper off the glass you ordered.
Should you have any issues feel free to PM me.
Sent from my SAMSUNG-SGH-I747 using xda premium

Cracked screen disassemble s4mini?

Recently I dropped my phone and cracked the screen works fine it almost not noticeable while using it but I know is not perfect...
I noticed there are screen glass kit for replace only the glass, anybody know how to change only this glass, I've seen on YouTube glass replacements done on galaxy S3, I think it's similar
Anyone have disassemble the s4mini or can point at some guide or video on how to disassemble the phone
Sent from my GT-I9192 using Tapatalk

https://www.youtube.com/watch?v=4sOKKoxu3L4

b0g said:
https://www.youtube.com/watch?v=4sOKKoxu3L4
Click to expand...
Click to collapse
In my experience with fixing many many iPhones... it's not the dis-assembly/assembly that will be your problem (it went together somehow so it must all come apart) I think you will have trouble separating the gorilla glass from the LCD as this is usually glued together. You have to use heat etc without damaging the LCD. Unless you have the correct tools, it's almost not worth the effort. See if you can get an LCD/Digitiser kit with the glass included.
This is my opinion of course.

Here is the video I used for reference for doing mine. It shows specifically screen replacement from beginning to end.
https://www.youtube.com/watch?v=52yoygBI3AA
Not sure what all the other video shows. I didn't watch all of it. From what I saw, it looked pretty good too.

Thanks all for your replies
shayne77 said:
In my experience with fixing many many iPhones... it's not the dis-assembly/assembly that will be your problem (it went together somehow so it must all come apart) I think you will have trouble separating the gorilla glass from the LCD as this is usually glued together. You have to use heat etc without damaging the LCD. Unless you have the correct tools, it's almost not worth the effort. See if you can get an LCD/Digitiser kit with the glass included.
This is my opinion of course.
Click to expand...
Click to collapse
Have you changed the glass,
A friend has a heat gun, at work I have a laser temperature gun but not shure it's the same procedure for mini as the s3 or s4
Sent from my GT-I9192 using Tapatalk

fburgos said:
Thanks all for your replies
Have you changed the glass,
A friend has a heat gun, at work I have a laser temperature gun but not shure it's the same procedure for mini as the s3 or s4
Sent from my GT-I9192 using Tapatalk
Click to expand...
Click to collapse
I didn't no... (for iPhone, I assume all smartphones are similar) you have to heat the old screen/glue to get the broken glass off the LCD. Then you're left with a residue on your LCD/Digitiser which has to be cleaned off "completely" before you put the new glass on. (Special chemicals) When you get the point of putting the new glass on, there's a special glue/adhesive you have to use so you dont get bubbles between the two etc. Then I think you have to treat the whole assembly for "x" hours under a UV light to cure the glue. It's a lengthy process.
Look on youtube for "iphone gorilla glass replacement" and you'l see what I mean. Again, I assume the SGS4mini is similar. Me, I would buy the whole assembly and save the heartache.

Replacement screen

What is the best site to get a replacement screen from? My digitizer is fine, just need the screen

Ouch!

Found one for 15, going to two tone my note 4

n00b1269 said:
Found one for 15, going to two tone my note 4
Click to expand...
Click to collapse
Where did you find it?eBay?post a link and let us know after you install it if you recommend it,I like to have a back up screen laying around haven't seen any post on replacing one on note4 yet,surprisingly I havent had to replace a Samsung screen yet had s3,4,5,and now note4,I did replace the camera glass on S5 and the charging flap,got them from some site they came from Hong Kong or something but were OEM and cheap.

http://www.hytparts.com/005521-oem-replacement-outer-glass-lens-for-samsung-galaxy-note-4.html

n00b1269 said:
http://www.hytparts.com/005521-oem-replacement-outer-glass-lens-for-samsung-galaxy-note-4.html
Click to expand...
Click to collapse
Nice that looks legit,please post back and let me know how long it took to receive it and what your thoughts are on it.

Will be ordering Thursday, there are four color options. I have the white, I'm going to do the black glass, with the white and chrome and black back I think.

That will look good,I have the white s3,black s4,white s5, I use all dark backgrounds if there's an option and dark wallpapers with the black note4, it just looks nicer to me, that's why I got black this time,but I'd put the white back on myn,I actually never saw the white one in person to be honest I'll have to take a look.

Good luck swapping just the glass, its fused to the digitizer.

deathshead said:
Good luck swapping just the glass, its fused to the digitizer.
Click to expand...
Click to collapse
Can you elaborate,are you saying its impossible to replace just the screen and he will need to replace the digitizer also with one that has the screen fused to it?

djmouse said:
Can you elaborate,are you saying its impossible to replace just the screen and he will need to replace the digitizer also with one that has the screen fused to it?
Click to expand...
Click to collapse
Sorry ididnt provide much detail but theres a video on youtube with a repair guy and he attempts to do a glass swap and breaks the digitizer from it being fused like the s3

djmouse said:
Can you elaborate,are you saying its impossible to replace just the screen and he will need to replace the digitizer also with one that has the screen fused to it?
Click to expand...
Click to collapse
I'm sure Google can elaborate also.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app

Martinjv71 said:
I'm sure Google can elaborate also.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
Thanks,were not here to be negative were here to learn and share,maybe he had a hands on experience, that's better then googling something most times, I already saw a tear down of the note4 but not the screen being taken off the digitizer but thanks again for being so helpful.

deathshead said:
Sorry ididnt provide much detail but theres a video on youtube with a repair guy and he attempts to do a glass swap and breaks the digitizer from it being fused like the s3
Click to expand...
Click to collapse
Don't you just heat it like the rest to separate it? I assume its no different then replacing note 2 or 3 glass...
Sent from my SAMSUNG-SM-N910A

bordman said:
Don't you just heat it like the rest to separate it? I assume its no different then replacing note 2 or 3 glass...
Sent from my SAMSUNG-SM-N910A
Click to expand...
Click to collapse
That's the problem. I don't think you can. I'm paying $75 to get it fixed.

A blow dryer did the trick

n00b1269 said:
A blow dryer did the trick
Click to expand...
Click to collapse
Got pics?
How did it turn out and where did you get the parts?

I don't have pics, I sold it literally the moment it was fixed. But I can say, the kit was 11.95 with amazon prime shipping. It was for the 910. The glass was cheap, but usable and came with tools. This lit used double sided tape, not loca and the glass didn't have a logo. I two toned it. I thought it would look better but just looked like knock off. But hey my buddy slapped down $690 and said he wants it so no complaints

Basically the concept is heating the glass so the adhesive between the digitizer and glass can be loose or let's say workable. I did this on my Galaxy Note 1 but kinda screwed up a bit. Trying to separate the glass from the digitizer is a pain on the butt because with what ever you use to separate it you can also risk scratching the digitizer. Also do not overheat as it can mess your screen up bad. Let's say all the job is cleanly done and you separated the glass still with the adhesive on the digitizer, put the new glass on the screen and with the heat gun/hair dryer put some heat on the glass to get the adhesive back to stikn mode. This is a simple but yet risky fix. In my experience with a new phone I'd pay the amount to get the screen fixed though idiots here in Georgia will try to rip you off saying you need a new digitizer as well. Hope it gives you a bit of info though look for vids about this before attempting on your own note 4
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app

They give you a clear wire between two rings to separate the screen. It was quite easy. Bunch of glue left over but rubbing alcohol and a light touch took care of that. The trick was to have someone else heating as you slowly work it. I think the fix would of looked a bit better with loca I feel.