i have htc one x
CID htc__004
S-On
Hboot 1.36.0000
Radio 5.1204.162.29
and my software number is Android Revolution HD 18.0 by mike 1986..
i just want to go back to stock because i have warranty for this phone... wichh ruu is for me for claiming warranty or OTA updates????
and if you guys don't mind can you give me link how can i do this.......
Thanx
3.14.401.31, I think. htcruu.com
Download this one (as Mr Pope said but now with link)
http://www.htcruu.com/securekey.php...Radio_5.1204.162.29_release_302015_signed.exe
Put the phone in fastboot usb mode and relock the bootloader with the fastboot command
Fastboot oem lock
Then keep the phone in fastboot usb mode and execute the ruu from the pc with admin rights !
Sent from my HTC One X using xda premium
Mr Hofs said:
Download this one (as Mr Pope said but now with link)
http://www.htcruu.com/securekey.php...Radio_5.1204.162.29_release_302015_signed.exe
Put the phone in fastboot usb mode and relock the bootloader with the fastboot command
Fastboot oem lock
Then keep the phone in fastboot usb mode and execute the ruu from the pc with admin rights !
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
This one is for Europe Right?...... But my CID is shows asia wwe sea type i guess....................
oh my bad..
my CID is htc__044.....
Then you have to check HTCruu.com - endeavoru and check if its there it least it has to start with 3.14
Mr Hofs said:
Then you have to check HTCruu.com - endeavoru and check if its there it least it has to start with 3.14
Click to expand...
Click to collapse
oky.. i found this one...
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed
is it right one or not???
Well do a fastboot command to be sure ! Put the phone in fastboot usb mode and type
Fastboot getvar version-main
The number that shows up has to match !
Related
Any one who can help me with the exact ruu to flash for my one x.CID 02_001.Thanks.PS dont redirect me to filefactory ruu data base because i was there but i dont know where i belong(asia,taiwan,HK....).In fact thats what i need to know!!Where i belong.
In fastboot connected to PC, type : fast boot getvar version-main the number is the ruu version you need.
Sent from my HTC One X using xda app-developers app
XxVcVxX said:
In fastboot connected to PC, type : fast boot getvar version-main the number is the ruu version you need.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Code:
fastboot getvar version-main
precisely
thanks guys question answered!!
Closed on OP Request
hi guys
as u know there is a jb update for one x but its just for 621 cid.
i installed "jox" and this software show me my cid and its HTC_621
but when i type fastboot getvar version-main in fastboot,its show me 1.28.751.9 and i see it in about in my android.
so i fink i have one x wid CID621 TW wid software number is x.xx.751.x
my question is can i install ota jb update for 621? if yes plz tell me how i can do it wid fastboot. fnx
Justphemy said:
hi guys
as u know there is a jb update for one x but its just for 621 cid.
i installed "jox" and this software show me my cid and its HTC_621
but when i type fastboot getvar version-main in fastboot,its show me 1.28.751.9 and i see it in about in my android.
so i fink i have one x wid CID621 TW wid software number is x.xx.751.x
my question is can i install ota jb update for 621? if yes plz tell me how i can do it wid fastboot. fnx
Click to expand...
Click to collapse
type
Code:
fastboot getvar cid
and tell me which result it gives back
matt95 said:
type
Code:
fastboot getvar cid
and tell me which result it gives back
Click to expand...
Click to collapse
tnx for replay
i do it and its sho me CID: None
Justphemy said:
hi guys
as u know there is a jb update for one x but its just for 621 cid.
i installed "jox" and this software show me my cid and its HTC_621
but when i type fastboot getvar version-main in fastboot,its show me 1.28.751.9 and i see it in about in my android.
so i fink i have one x wid CID621 TW wid software number is x.xx.751.x
my question is can i install ota jb update for 621? if yes plz tell me how i can do it wid fastboot. fnx
Click to expand...
Click to collapse
I think you cannot, but I just saw information over here http://forum.xda-developers.com/showthread.php?t=1967980 an update for x.xx.751.x is spotted (3.14.751.20). So just check for updates or wait a little longer.
Justphemy said:
tnx for replay
i do it and its sho me CID: None
Click to expand...
Click to collapse
is android sdk set properly in your build?
type
Code:
fastboot devices
i'm assuming you are in fastboot mode
webpatrick said:
I think you cannot, but I just saw information over here http://forum.xda-developers.com/showthread.php?t=1967980 an update for x.xx.751.x is spotted (3.14.751.20). So just check for updates or wait a little longer.
Click to expand...
Click to collapse
but my cid and s number is like that in line 2 (Carrier:ChungHwa Telecom.Country:Taiwan,CID:Htc_621,Software number: x.x.751.xx)
matt95 said:
is android sdk set properly in your build?
type
Code:
fastboot devices
i'm assuming you are in fastboot mode
Click to expand...
Click to collapse
hm i fink yes i can see HTC SDK API level in my software information. (HTCExtension_403_1_GA_7)
Justphemy said:
but my cid and s number is like that in line 2 (Carrier:ChungHwa Telecom.Country:Taiwan,CID:Htc_621,Software number: x.x.751.xx)
hm i fink yes i can see HTC SDK API level in my software information. (HTCExtension_403_1_GA_7)
Click to expand...
Click to collapse
so go on, type
Code:
fastboot devices
and then you should see a serial code
matt95 said:
so go on, type
Code:
fastboot devices
and then you should see a serial code
Click to expand...
Click to collapse
yes i see a serial code HT246W10XXXX
Justphemy said:
yes i see a serial code HT246W10XXXX
Click to expand...
Click to collapse
that's ok, the computer recognizes the phone, now type again
Code:
fastboot getvar cid
matt95 said:
that's ok, the computer recognizes the phone, now type again
Code:
fastboot getvar cid
Click to expand...
Click to collapse
Its show me again cid: None
Justphemy said:
Its show me again cid: None
Click to expand...
Click to collapse
ok so try booting up the phone and type
Code:
adb shell getprop ro.cid
fastboot oem readcid should give you the cid if other commands give you "none"
Vcek said:
fastboot oem readcid should give you the cid if other commands give you "none"
Click to expand...
Click to collapse
yeah forgot about it thanks
matt95 said:
ok so try booting up the phone and type
Code:
adb shell getprop ro.cid
Click to expand...
Click to collapse
i do it but its show me 'adb' is not recognzied as an internal or external...
Vcek said:
fastboot oem readcid should give you the cid if other commands give you "none"
Click to expand...
Click to collapse
fnx its sho me cid: HTC__621
Justphemy said:
i
fnx its sho me cid: HTC__621
Click to expand...
Click to collapse
ok so with that cid you can upgrade to HBOOT 1.31
matt95 said:
ok so with that cid you can upgrade to HBOOT 1.31
Click to expand...
Click to collapse
fnx bro for ur all replay and help. can u gime the thread? i have this file "OTA_ENDEAVOR_U_JB_45_S_hTC_Asia_TW_3.14.709.16-2.17.709.7_release" 353mb,how i can install this? (i have cwm recovery)
Justphemy said:
fnx bro for ur all replay and help. can u gime the thread? i have this file "OTA_ENDEAVOR_U_JB_45_S_hTC_Asia_TW_3.14.709.16-2.17.709.7_release" 353mb,how i can install this? (i have cwm recovery)
Click to expand...
Click to collapse
follow these steps
Relock your bootloader using the commend 'fastboot oem lock'.
Go into fastboot mode and type 'fastboot oem rebootRUU'.
Flash the new firmware using the commend 'fastboot flash zip firmware.zip'.
On first time running the commend you will see FAILED, don't panic and just run the commend again.
Reunlock your bootloader via HTCDev.
Flash custom recovery using the commend 'fastboot flash recovery recovery.img'.
when you're done you can install a JB rom remember to flash the rom's boot.img
matt95 said:
follow these steps
Relock your bootloader using the commend 'fastboot oem lock'.
Go into fastboot mode and type 'fastboot oem rebootRUU'.
Flash the new firmware using the commend 'fastboot flash zip firmware.zip'.
On first time running the commend you will see FAILED, don't panic and just run the commend again.
Reunlock your bootloader via HTCDev.
Flash custom recovery using the commend 'fastboot flash recovery recovery.img'.
when you're done you can install a JB rom remember to flash the rom's boot.img
Click to expand...
Click to collapse
i do it but firmware can't to install and its failed everytime, what should i do ?
and one more question,my update is ota and i fink its not have a boot.img file
Justphemy said:
i do it but firmware can't to install and its failed everytime, what should i do ?
and one more question,my update is ota and i fink its not have a boot.img file
Click to expand...
Click to collapse
Are you starting the whole process over every time it fails to flash the new firmware?
i know it usually fails the first time the command 'fastboot flash zip firmware.zip' is used, try this command again straight away after it first fails without starting the whole process again and it should work
exocetdj said:
Are you starting the whole process over every time it fails to flash the new firmware?
i know it usually fails the first time the command 'fastboot flash zip firmware.zip' is used, try this command again straight away after it first fails without starting the whole process again and it should work
Click to expand...
Click to collapse
i do it again after faild,is show me failed <remote: <00120000>>
and when i did it again,it was still on sending 'zip' <12878 KB>... but for 562 sec its not do anything
How do i found out what ruu i need?
Ruu
You perform a fastboot command
Fastboot getvar version-main
This number is the ruu number you need
Mr Hofs said:
You perform a fastboot command
Fastboot getvar version-main
This number is the ruu number you need
Click to expand...
Click to collapse
Once I have downloaded the correct Ruu, how would I go about getting it back to stock?
1: charge the battery
2: relock the bootloader
-fastboot oem lock
3: keep the phone in the bootloader/fastboot usb mode
4: execute the RUU.exe with admin rights.
-click the ruu with right mousebutton and select "run as administrator
enshnes true
Mr Hofs said:
You perform a fastboot command
Fastboot getvar version-main
This number is the ruu number you need
Click to expand...
Click to collapse
version-main: 3.14.161.27 That's what it says what Ruu do i download and i am in the uk on vodafone
Hmm that one is not available. You can return to stock with a new nandroid backup. I think its available in the collection with nandroid backups in the general section of this forum.
After following the exact instructions and downloading this ROM Link the phone is stuck at the boot screen, (after downloading the ROM successfully). I'm sure it's stuck because I've waited for about half an hour and nothing changed.
ENDEAVORU PUT SHIP S-ON RL
HBOOT- 0.43.0000
CPLD-NONE
MICROP-NONE
RADIO-NONE
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW Secure boot : enabled
MODEM PATH: OFF
your hboot is way to low !
Get the outcome of :
Fastboot getvar version-main
Mr Hofs said:
your hboot is way to low !
Get the outcome of :
Fastboot getvar version-main
Click to expand...
Click to collapse
OK, what should I do to fix the problem?
Give the outcome of the command, install some ruu's and ota's and start over with unlocking and custom romming
Mr Hofs said:
Give the outcome of the command, install some ruu's and ota's and start over with unlocking and custom romming
Click to expand...
Click to collapse
I'm sorry but I'm new at this, how can I know my CID? The phone is not booting so I can't get it from a play-store app, how can I know it using the bootloader?
abd97fcb said:
I'm sorry but I'm new at this, how can I know mi CID? The phone is not booting so I can't get from a playstore app, how can I know it using the bootloader?
Click to expand...
Click to collapse
post the result from command fastboot getvar all and delete your S/N and IMEI from the info
I don't need your cid, I need that command I posted earlier !!! I asked it in the second post already, still havent got it ?!
Edit :
Thant i know you mean it very well but i already asked him to do the command I need. Lets not start over with other commands
Mr Hofs said:
I don't need your cid, I need that command I posted earlier !!! I asked it in the second post already, still havent got it ?!
Edit :
Thant i know you mean it very well but i already asked him to do the command I need. Lets not start over with other commands
Click to expand...
Click to collapse
Sorry my mistake:good:
Thant said:
Sorry my mistake:good:
Click to expand...
Click to collapse
It's oke, but i need answers now.....not more questions !
Mr Hofs said:
It's oke, but i need answers now.....not more questions !
Click to expand...
Click to collapse
Sorry, took me time to realize it since I'm new to this stuff:
INFOversion: 0.5a
INFOversion-bootloader: 0.43.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.26.771.2
******
******
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: NONE
INFO-partition-layout: one
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcomitno-boootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
My phone's CID is: H3G_001. (Bought the device from a third party store without knowing that the bootloader was unlocked)
Thanks you very much for helping.
Okidoki
Relock the bootloader
Fastboot oem lock and execute this ruu with admin rights. After the ruu you search for official ota !
http://www.androidruu.com/getdownlo...adio_1.1204.105.14H_release_260888_signed.exe
Mr Hofs said:
Okidoki
Relock the bootloader
Fastboot oem lock and execute this ruu with admin rights. After the ruu you search for official ota !
http://www.androidruu.com/getdownlo...adio_1.1204.105.14H_release_260888_signed.exe
Click to expand...
Click to collapse
Thank you very much, but I didn't understand everything clearly, since I'm not an expert. Can you please simplify? Again, thank you
1: download the ruu to your desktop
2: put the phone in the bootloader/fastboot usb mode
3: relock the bootloader :
fastboot oem lock
4: keep the phone in the bootloader
5: select the ruu.exe on the pc by clicking it with the right mouse button and select :
run as administrator
6: wait till its finished and reboot the phone. go into the settings - about - software update menu and search for official ota
Mr Hofs said:
1: download the ruu to your desktop
2: put the phone in the bootloader/fastboot usb mode
3: relock the bootloader :
fastboot oem lock
4: keep the phone in the bootloader
5: select the ruu.exe on the pc by clicking it with the right mouse button and select :
run as administrator
6: wait till its finished and reboot the phone. go into the settings - about - software update menu and search for official ota
Click to expand...
Click to collapse
Thank you, now it working. The thing is I'm not in the UK right now (Not using a Three sim card), and I won't be back. Is there anyway to update it? Because now it says There are no updates available.
uhm yeah there is another way, let me search for it. In the meantime check for updates manually a couple of times
EDIT :
Download this RUU and install it too :
http://www.putlocker.com/file/E7631E34525C605B (click the right blue download button) after this ruu you check for OTA again......
Mr Hofs said:
uhm yeah there is another way, let me search for it. In the meantime check for updates manually a couple of times
Click to expand...
Click to collapse
I'll keep checking. Is installing a custom Rom is the only way?
Thank you again
Well no, but i think they pulled some very old OTA's. so if you are on a certain old android version it won't find the updates anymore. I edited my post and install the 2.17 ruu too. Check again after that. If it's still not working after the 2.17 ruu i have another option
Mr Hofs said:
Well no, but i think they pulled some very old OTA's. so if you are on a certain old android version it won't find the updates anymore. I edited my post and install the 2.17 ruu too. Check again after that. If it's still not working after the 2.17 ruu i have another option
Click to expand...
Click to collapse
It worked! I didn't reply earlier because the OTA Update took so long to download. I'm really grateful, thank you
Just out of curiosity, is there going to be more official updates for the One X?
Depends on what software number you are now ? Check that for me please. Go into settings-about-software and post it here please. or do :
fastboot getvar version-main
again.....
Mr Hofs said:
Depends on what software number you are now ? Check that for me please. Go into settings-about-software and post it here please. or do :
fastboot getvar version-main
again.....
Click to expand...
Click to collapse
:laugh:
My software number is:
4.18.771.4
I tried to update this HTC ONE X (fastboot oem readcid "HTC_622", fastboot getvar version-main "9.29.709.7", HBOOT-0.43.0000, RADIO-1.1204.104.14) from ICS to JB but failed now it will not go past the boot screen. I have tried searching for the exact RUU but haven't had any luck. Any help will be appriciated.
I hope you mean 1.29.709 ?
Try this one
http://androidruu.com/getdownload.p...Radio_1.1204.104.14_release_259284_signed.exe
Mr Hofs said:
I hope you mean 1.29.709 ?
Try this one
http://androidruu.com/getdownload.p...Radio_1.1204.104.14_release_259284_signed.exe
Click to expand...
Click to collapse
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_TW_1.26.709.3_Radio_1.1204.90.13_release_251853_signed (CID ERROR)
RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_TW_3.14.709.20_Radio_5.1204.162.29_release_292865_signed (CID ERROR)
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed (CID ERROR)
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_HK_1.29.708.9_Radio_1.1204.104.14_release_259897_signed (CID ERROR)
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_TW_1.29.709.7_Radio_1.1204.104.14_release_259284_signed (DOES NOT RUN)
But does fastboot getvar version-main come up with 9.29.709 or 1.29.709 ?
When the main comes up with 709 you can't run a 708 ruu and vice versa !
Try the 1.29.709 ruu again but make sure to turn off firwewalls and anti-virus software, also make sure to put the phone in the fastboot usb mode (do : fastboot devices command prior to run the ruu to see if it comes up with the serial) and also execute the ruu with admin rights. Right click the ruu and select run as administrator
Thanks I downloaded it twice but it doesn't run. Guess something's wrong with that file.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Mr Hofs said:
But does fastboot getvar version-main come up with 9.29.709 or 1.29.709 ?
Click to expand...
Click to collapse
This question still stands !
Am so sorry. My version is 9.29.709.7.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
In my existence here in the hox section i have never.....ever seen a main number like that !
Please attach a picture of your complete hboot !