Note II doesn't get past performing data wipe - T-Mobile Samsung Galaxy Note II

I was wondering if anyone can help me out with the boot loop my Note II is stuck on. I was running My Rom and decided to download and try MY UI rom. I downloaded the rom and using Rom Manager I had the phone boot into recovery wipe and install. The phone booted into recovery and and started to wipe like it normally does. It gets as far as Formatting /data but then reboots. It goes back into recovery and does the Formatting /data and reboots again. I tried taking the battery out waiting a little bit and put it into download mode so I can flash with odin but it just boots into recovery and starts to wipe and reboots. Any ideas on how to fix this?

Related

[Q] Stuck in boot loop, can't get into download mode, CWM hangs at formatting /cache

I have the Telus SGH-T989. Rooted, latest CWM Recovery Touch installed. Was running Darkside Evolution 7 and the phone would not "properly" restart itself - would hang at black screen with buttons lit up until I pulled the battery. Booted fine when I did that, but I didn't want to deal with it every time so decided I would flash a new ROM. Well, never quite made it that far... CWM hangs on "formatting cache" when I select wipe data/factory reset. After sitting there for a while, it restarted and went into a boot loop. I can get it back into CWM, but it continues to hang if I try formatting the /cache or installing a new .zip. I cannot get the phone into download mode to use ODIN, it only goes to the battery charging display or CWM.
I tried searching a bit, but it seems the other threads are having the opposite problem - can get into download mode but not CWM.
Anything I can do to fix this from CWM, or will I have to build a cable "jig" to trick the phone into download mode?
Kill the battery and try to get into download mode or try to get into cwm
Sent from my SGH-T989 using xda premium
Well. I am now at a complete loss... I was letting it cycle restarting to run down the battery, and after the 30th or so time, it booted up fine and stayed running. Gonna hold off attempting updates or anything until I can rig up a cable jig in case it goes again.
I normally do...
Wipe Data/Factory reset
Wipe cache partition
install zip from sdcard
go to Advanced
Wipe dalvik cache
Wipe battery status
Fix permissions (just incase)
Reboot Device
wait about usually 3-8 minutes depends on the ROM. if it's longer then that then your stuck in a boot loop
this is all on done on CWMR v6.0.1.5
Please help
I am having the same problem. Also it is in bootloop and i am not able to boot the phone.

[Q] Boot Loop after CWM Restore

Hi,
Using philz touch recovery I recently did a full backup of my phone. I then wanted to restore my phone to that state so I tried to do this, pressing backup and restore/ restore from sdcard1. Philz touch said the restore had completed but when I rebooted the phone I encountered a boot loop. I managed to get past the boot loop but I now have to set up my phone from scratch. It seems every time I try to restore it causes a boot loop. Would anyone know why this may be, or if I did something wrong? Thanks.
(Using s4 mini gt i9192
I am also facing this issue when i flashed back into stock using odin..then i have to go into recovery mode and wipe data and factory reset and then wipe cache partistion.
Yes. I am running a cm12 nightly.
My phone often boot loops when I reboot for an xposed module for example. It s annoying because I then have to re-setup my phone.

Can't flash other Recovery

Hi, i have an I9195 and a huge problem.
Until recharge in the night, the phone shutdown for any reason.
I had flashed Cynagenmod 12.1 on it, so i have CWM Recovery. After it doesnt started and hang in the startscreen of Cynagenmod(the blue Alien or whatever it is ), i entered Rcovery mode and tried to wipe Cache and Dalvik Cache. Nothing happened and when i started Recovery i also got and Error:
Can't mount /cache/recovery..
I tried to format the cache and wipe it, but anything helps.
So i decided to go back to stock. i downloaded the stock rom and flashed it threw odin. But when i entered Recovery, the CWM Recovery is still there. This shouldn't, because the stock rom flashes his own recovery, didn't she? But well, i tried to start the Phone but hang in a bootloop. I only see the Samsung logo, then it restarts after a while. I think because i couldnt wipe the cache.
But well, so i thought about to flash TWRP Recovery. But well, get trolled by odin and my phone again, still enters the CWM recovery. When i flashed threw odin, no error occured and all flashes ended with success.
What can i do now?

stuck on samsung screen; can't install ROM

Hey guys,
I just flashed the recovery via odin on my GT-I9195 and installed the latest release from cyanogenmod.org It worked fine, the phone started normally. But when i tried to restart the phone it was stuck on the samsung screen, saying "set warranty bit kernel". I tried to install the ROM again doing factory resets and so on but whenever I start the installation the screen goes black for a second or so and jumps back to the main menu of the recovery... I also tried the cwm-recovery which gives the same result. screen goes black and jumps back into recovery.
Anyone got a solution?
Recovery used:
openrecovery-twrp-3.0.2-1-serranoltexx-STABLE-signed.zip
CyanogenMod:
cm-13.0-20160418-SNAPSHOT-ZNH0EAO2NJ-serranoltexx.zip (snapshot)
jacob00 said:
Hey guys,
I just flashed the recovery via odin on my GT-I9195 and installed the latest release from cyanogenmod.org It worked fine, the phone started normally. But when i tried to restart the phone it was stuck on the samsung screen, saying "set warranty bit kernel". I tried to install the ROM again doing factory resets and so on but whenever I start the installation the screen goes black for a second or so and jumps back to the main menu of the recovery... I also tried the cwm-recovery which gives the same result. screen goes black and jumps back into recovery.
Anyone got a solution?
Recovery used:
openrecovery-twrp-3.0.2-1-serranoltexx-STABLE-signed.zip
CyanogenMod:
cm-13.0-20160418-SNAPSHOT-ZNH0EAO2NJ-serranoltexx.zip (snapshot)
Click to expand...
Click to collapse
Have you install "Gapps" after flashing CM13?
If you backup you custom rom than try fresh installation: copy CM13 & Gapps to Ext SD Card, Wipe everything (Dav cache, Cache, Data, Perload, Internal Storage) Dont wipe your Ext SD Card.
Than flash CM13 & Gapps after flash simply reboot. Don't wipe anything, Don't factory reset.
Hope it could be worked...
Try to go back to stock rom. Hope your phone revives.

Galaxy Tab3 7.0 (SM-T210) - Can't flash ROMs, recovery or factory reset + bootloop

Hi all
Been having some issues with a Tab3 that was stuck in bootloop - it would turn on for anywhere upto 10-20 seconds then reboot, and repeat... I tried going into setting and selecting factory reset and it wouldn't allow it.
I then used Odin to flash TWRP recovery then flashed a custom ROM (can't remember which but it was completely de-bloated and had bare necessities). The bootloop continues and still not fixed.
When I boot into recovery I can select all options, re-partition, format, wipe cache/dalvik, etc... But even though I've wiped everything in recovery when I reboot the Tab everything is exactly as it was, as though I hadn't wiped it.
I've tried flashing a new recovery and stock ROM with no success... So, I'm wondering if anyone has ever had this problem and how would you recommend I go about fixing it?
Cheers
I've tried using Odin using re-partition, nand erase all, phone efs clear, PIT file, stock ROM, recovery, etc...
It's not hard-bricked as it's booting up, but for some reason it doesn't wipe or flash to stock and I can't find the solution!!
Any help is appreciated

Categories

Resources