Related
I haven't found really good explanation on forum and most of post on this seems not to be answered so I'm posting to see if I can get this sorted.
I used Leedroid, InsertCoin, and now on GingerVillian now. All of them had same setting of 500MB ext partition. Problem is I always seems to get low internal memory no matter what ROM I use. Currently I have 394MB free SD-EXT and 16MB Internal.
I moved adobe flash to SD card which seems to free up space and Dalvik Cache is on SD-Ext.
So question is why even though I have lot of EXT space left is it not being used and is there way to make it use it more instead of internal memory?
jinius said:
I haven't found really good explanation on forum and most of post on this seems not to be answered so I'm posting to see if I can get this sorted.
I used Leedroid, InsertCoin, and now on GingerVillian now. All of them had same setting of 500MB ext partition. Problem is I always seems to get low internal memory no matter what ROM I use. Currently I have 394MB free SD-EXT and 16MB Internal.
I moved adobe flash to SD card which seems to free up space and Dalvik Cache is on SD-Ext.
So question is why even though I have lot of EXT space left is it not being used and is there way to make it use it more instead of internal memory?
Click to expand...
Click to collapse
App2SD is flawed because of this, say you have an app 20mb, 15mb would be put on to the SD card and the rest go's to internal, so you will still use up space and in the end will have to start uninstalling.
Best way is to use a Rom with data2SD witch give's you 2gb internal memory.
Sent from my HTC Desire using XDA App
I have the same problem... I hate it , i have 1 gb for sd-ext3 and i cant enjoy it !
Any ideas ?
wska said:
I have the same problem... I hate it , i have 1 gb for sd-ext3 and i cant enjoy it !
Any ideas ?
Click to expand...
Click to collapse
Data2SD RoM problems solved
One could also flash a new hboot which increases the size of the /data-partition. However you need s-off for this and it's imho riskier than flashing a rom with data2sd. Whereas i work with a2sd + cm7 hboot and i am very happy it.
Desire with Cool Sensation v7
Hi,
I have this problem too. but it is not our choice to choose the data2sd instead of app2sd because it depend on what the ROM support.
Previously I use App2sd+ from ModaCo ROM. I have 200+ apps and it take the internal memory nearly full but sd-ext space just half.
I tried the Data2sd for Desire is only SuperNova with HTC Sense and it work in 1Gb sd-ext. BUT it uses Sense 2.1.
I just try Sense 3 from Cool Sensation v7 ROM. I love it and dont want to revert back to previous Sense It have 3D home screen, cool weather animation, SMS secure lock. However this ROM still use app2sd. I cannot post to the thread, I dont have enought post count.
I try some other way to apply Data2sd into this ROM but I got boot loop.
After few days I use this ROM, my internal memory almost full (15mb free) for only 57 apps even the app2sd symlink-ed /data/app, /data/app-private, /data/dalvik-cache and /system/app into sd-ext!
Expert please help me and give me some idea.
Do I need to symlink /data/data into sd-ext manually?
Is it possible to remove app2sd in the ROM and install Data2sd? How?
Data2sd require busybox, init.d and ext4 kernel support. I think this ROM have all this thing.
HTC Desire
Hboot S-Off with Revolutionary
4ExtRecovery
Cool Sensation v7 ROM
8Gb Class 2 sd card with Fat32 + 1Gb ext4
And have some basic in Linux shell
I can 100% get my head around this either, although i did install some apps and i could really tell if it was on Internal or EXT4.
From my understanding, as far as the phone os, it thinks apps are on Internal and will decrease the size counter, but apps are on EXT4 if you use a file manager etc.. but even if all goes to EXT4, we still get that annoying LowDisk message was it get to 15megs...
I still was convinced, but i accidently decided i wanted to format my FAT32 partition, mainly to get rid of all the junk that on there since STOCK Rom. I used the Phone own Format SD Card option.
Well that was fun (NOT!!) it instead formatted the EXT4 and not the FAT32, when i rebooted all the loaded apps that were on EXT4 were now gone.
Phone still works, but one side effect of this is now i have like 270megs free....lol, granted no wallpaper, lockscreens etc,
anyway seeing as i screwed up and that im already S-OFF, im going to just go with CM7r2 HBoot.
Similar issue - I think?
Hi all, my first post here
So I have been working my way through all the error messages and guides and finally have InsertCoin set up. All is looking good except after Titanium Backup restored all my apps my internal memory is as full as before I rooted the phone, so I think I can safely say that the 2gb I partitioned off on my SD is not getting ay use at all? Is there a way I can check?
For the record I am running with AmonRa, and I used Revolutionary to get s-Off. The guide I followed to set up A2SD did not have me using any Terminal commands, so I am guessing that is an area for me to explore in solving this, here is the guide I used (near the end)
/myhtcdesire.com/modding/how-to-install-a-custom-rom-on-your-htc-desire
I used that method as i am on a borrowed mac and it just seemed easier. I
I am hoping there is an easy fix that someone can suggest.
hoads1234 said:
Hi all, my first post here
So I have been working my way through all the error messages and guides and finally have InsertCoin set up. All is looking good except after Titanium Backup restored all my apps my internal memory is as full as before I rooted the phone, so I think I can safely say that the 2gb I partitioned off on my SD is not getting ay use at all? Is there a way I can check?
For the record I am running with AmonRa, and I used Revolutionary to get s-Off. The guide I followed to set up A2SD did not have me using any Terminal commands, so I am guessing that is an area for me to explore in solving this, here is the guide I used (near the end)
/myhtcdesire.com/modding/how-to-install-a-custom-rom-on-your-htc-desire
I used that method as i am on a borrowed mac and it just seemed easier. I
I am hoping there is an easy fix that someone can suggest.
Click to expand...
Click to collapse
To check if a2sd is working, open terminal emulator and type
Code:
su
ls -l /data
Output should say (for a2sd):
Code:
app -> /sd-ext/app
app-private -> /sd-ext/app-private
Additionally for a2sd+:
Code:
dalvik-cache -> /sd-ext/dalvik-cache
If it does not show this, a2sd is not working. So make sure you partitioned sd card correctly (fat32 + ext; both primary).
CallMeLaNN said:
Hi,
I have this problem too. but it is not our choice to choose the data2sd instead of app2sd because it depend on what the ROM support.
Previously I use App2sd+ from ModaCo ROM. I have 200+ apps and it take the internal memory nearly full but sd-ext space just half.
I tried the Data2sd for Desire is only SuperNova with HTC Sense and it work in 1Gb sd-ext. BUT it uses Sense 2.1.
I just try Sense 3 from Cool Sensation v7 ROM. I love it and dont want to revert back to previous Sense It have 3D home screen, cool weather animation, SMS secure lock. However this ROM still use app2sd. I cannot post to the thread, I dont have enought post count.
I try some other way to apply Data2sd into this ROM but I got boot loop.
After few days I use this ROM, my internal memory almost full (15mb free) for only 57 apps even the app2sd symlink-ed /data/app, /data/app-private, /data/dalvik-cache and /system/app into sd-ext!
Click to expand...
Click to collapse
I used Cool Sensation v7 but didn't have this problem until I flashed the newer v9 (just noticed v10 has been posted today though). My internal memory was very low but I then flashed the Dalvik to sdext.zip from the Cool Sensation thread and then had 180MB internal free. Try that and see if it works. If it doesn't, have you aligned your SD ext using the .zip on the same thread? if not this could be why your having problems, though it didn't work for me.
Thanks for the ideas, I was a bit out of my depth with the Mac SU functions, so although i didn't get the desired feedback you suggested, but it could have been me. So anyway I found a Ubuntu machine and plugged in the SD card in an adapter and can see that there is a successful partition, and that the EXT partition seems to have some files and folders in it.
I have also just noticed that the SD cards partitions also appear in the Titanium Backup overview screen.
So i guess my problem is that the memory is just full! Maybe my expectations of extra memory after rooting were unrealistic. ?
For the Record, just to make sure my situation is normal, in Titanium I see
System ROM - 262MB (129MB free)
Internal - 158MB (15MB free) - is this just a section of system ROM above?
SD CARD - 13.8GB (11GB free)
SD Card (a2sd) - 1.9GB (1.5GB free)
@xybadog this is my update,
@hoads1234 just want to share with you,
I use Cool Sensation v7, the internal memory full can be solved by flashing the additional zip for stock hboot but I flash non stock hboot. Why?
After some studying, now I know why expert keep asking for my hboot. Hboot define the data partition. On the phone memory, it divided into system, cache and data partition. the hboot define the partition size. For stock hboot, you will only have 147Mb for HTC Desire. Whatever the custom ROM symlink'ed some data partition, we stuck on 147Mb. If you flash like CM7r2 hboot, you will get more room (300+Mb) on data but just enough for system. "Internal memory" is referring to data partition.
Now I still have 130Mb free internal memory after installing 90 apps without wiping any cache for about 2 weeks.
I dont have Ubuntu even I know how to use it. No time to install or make virtual machine. To partition your sdcard easily without linux, use 4ExtRecovery. It is CWM based recovery plus support for Ext4 and some features like partitioning, check for aligned sd-ext and mount as disk drive.
To check for your current internal partition. boot into recovery, and use ADB to run command "df -h". The /system /data and /cache is the thing you need to look for.
You could use the cyanogenmod rom, then install s2e app from market. That app is designed purely for use with cyanogenmod. I use this combo, I have a huge amount of apps installed and still 50mb of internal space free. No need for changing your hboot or using data2sd rom. Very simple fix
Sent from my CM7.1 Desire using XDA Premium App
okay thanks, I am still happy having a go with InsertCoin, so I will have a look at the hboot.
I think i read somewhere that i could do it just like adding a new ROM and copying a zip file across, so time for some more forum reading to work my way through this next step.
http://forum.xda-developers.com/showthread.php?t=1110921
okay here is my update, since in have revolutionary hboot, i tried to change to alpharev, so i could use their modified partition tables (found no reference of being able to do this in Revolutionary) - the folks on alpharev irc said not to, but didn't say why.
I did try and use the unrevoked tool to flash AmonRa across again, but this had a waiting for reboot error and may have failed. I have also reflashed my ROM again after a full wipe a couple of times. Not finding any improvements in memory, so will keep fiddling.
okay next question!
I tried the terminal emulator commands (once i worked out this was an app, and not the Mac terminal..) and got the following responses
app -> /system/sd/app
app-private ->
dalvik-cache ->
so am i guessing correctly that none of the apps i download are being sent to the SD partition.
Any advice to get app-private directed to my sd card?
hoads1234 said:
okay next question!
I tried the terminal emulator commands (once i worked out this was an app, and not the Mac terminal..) and got the following responses
app -> /system/sd/app
app-private ->
dalvik-cache ->
so am i guessing correctly that none of the apps i download are being sent to the SD partition.
Any advice to get app-private directed to my sd card?
Click to expand...
Click to collapse
I suggest you use ADB instead of terminal emulator because easy to type in PC.
Install Android SDK make ADB shell to work and connected to your device. The shell is just the same what you need to do in terminal emulator.
To move app private and dalvik cache simply make symlink like this:
Code:
busybox cp -a /data/dalvik-cache /system/sd/
rm -rf /data/dalvik-cache
ln -s /system/sd/dalvik-cache /data/dalvik-cache
The first will move all contents, the second will remove the existing original dalvik-cache folder. and the third one will make symlink to point from original location to the sd partition.
I have been having nothing but problems with A2SD I decided to partition my EXT3 to 2GB and at first installed leedroid and have since moved to OxygeN both obviously show only around 120mb when I start phone I understand this. It doesn't show A2SD so I install quick system info that says I have 1.99GB A2SD storage. OK move to the future and I have around 14 apps installed and have ran out of space on my phone. internal storage 16.05mb A2SD free 1.85GB the phone is not installing apps to the SD card. It was the same for leedroid and for OxygeN. I have nearly all my A2SD space available. I have no apps moved to SD using Froyo-A2SD. I'm pulling my hair out as my phone refuses to let me download a 700k app from market now..
I tried wiping cache too it upped my free space to 17mb.
Vhero said:
I have been having nothing but problems with A2SD I decided to partition my EXT3 to 2GB and at first installed leedroid and have since moved to OxygeN both obviously show only around 120mb when I start phone I understand this. It doesn't show A2SD so I install quick system info that says I have 1.99GB A2SD storage. OK move to the future and I have around 14 apps installed and have ran out of space on my phone. internal storage 16.05mb A2SD free 1.85GB the phone is not installing apps to the SD card. It was the same for leedroid and for OxygeN. I have nearly all my A2SD space available. I have no apps moved to SD using Froyo-A2SD. I'm pulling my hair out as my phone refuses to let me download a 700k app from market now..
I tried wiping cache too it upped my free space to 17mb.
Click to expand...
Click to collapse
Have you moved dalvik from internal memory to sd ?
gippy2 said:
Have you moved dalvik from internal memory to sd ?
Click to expand...
Click to collapse
No I read thats a bad idea as it can cause problems?
EDIT - Tried it and now I have 97mb free.. AWESOME so far no probs will update if I have any more. Also noticed though when I backed up before adding the mod it had some games/apps in the devlik cache i no longer have installed? Any way I can remove them? Like Skype etc..
A2SD was the reason for me to root...tryed arround diff ROMs...had the same prob like u...then i find my perfect ROM: Acemod007
super fast, stable, super support, and the best: a2sd works perfectly! i have an 2 gb ext4 partition and round 150 apps installed and 200 mb internal free (running CM7r2)!
Check this out!
greez
Va2.0 said:
A2SD was the reason for me to root...tryed arround diff ROMs...had the same prob like u...then i find my perfect ROM: Acemod007
super fast, stable, super support, and the best: a2sd works perfectly! i have an 2 gb ext4 partition and round 150 apps installed and 200 mb internal free (running CM7r2)!
Check this out!
greez
Click to expand...
Click to collapse
yep thats why i rooted It's an annoying problem.
To find out, if a2sd+ is working, open terminal emulator and type
Code:
su
ls -l /data
In the ouput you should find this
Code:
/app -> /sd-ext/app
/app-private -> /sd-ext/app-private
/dalvik-cache -> /sd-ext/dalvik-cache
If you cannot find this, partition your sd card with gparted again (save important data before this):
1.) Create fat32 partition (primary)
2.) Create ext partition (primary)
3.) Flash e.g. oxygen rom
At last, make sure you followed the instructions in leedroid thread step by step in the correct order.
is the code i should write 1 or i ?
Neither nor. It's an "L" in lower case character.
SwiftKeyed from Oxygen with Transparent XDA App
Hey,
I've been using ICS (beta 0.4.2.1 now, beta 0.3.9 previously) and none of the a2sd scripts seem to be working. I tried to use the one you have to activate through adb, and today when I updated to 0.4.2.1 I chose another one from the installer. My phone still reports 148 MB of internal storage...
I've had a thorough search of similar threads, but you know how difficult it is to find any meaningful information on this forum; can someone please point me in the right direction? Thank you!
I flashed ICS and installed the bundled a2sd script and it worked like the script on Insertcoin. That is the system still displayed the data partition size of my hboot but the SD ext4 partition was utilised for apps. If you have titanium backup you can see the data usage on the home screen.
I also flashed amarullz script. This script did change the reported internal memory to my SD card partition size. I did not use it long so I can't comment on how it runs on s class 4 SD card.
Sent from my HTC Desire using XDA
You did not understand how A2SD works. It moves all apps (with A2SD+ also dalvik-cache) you install automatically to an EXT-partition (some of their data still remain in internal memory). But it does not increase / decrease the size of internal memory.
If you want to change the size of internal memory, you have to use a script which moves the whole /data-partition to an EXT-partition. The size of this partition is then the size of your internal memory. The name of this scripts is DATA2SD / DATA2EXT.
Sent from my HTC Desire using Tapatalk
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Did you ever get a fix for your problem?
I have something similar. Was running 0.3.9. and decided for a couple days ago to upgrade to a newer edition. Wiped data/factory reset, wiped cached and dalvik-cache, and installed the new version.
Used stock everything, activated a2sd and tried to start and install some apps from google play. Got a message that it was not sufficient space.
Did get titanium installed, and that reports the different "drives" correctly, but I still don't get it to work as it should. If I try to install from play, it says not sufficient space, even if I try to restore from titanium, still no luck.
Anyone got any ideas?
Start Terminal. Type:
su
a2sd install
yes (move dalvik-cache)
no (don't move appdata) (yes will make device slower)
yes (restart)
After reboot you have more space, but don't see it.
Start terminal
su
a2sd diskspace
gives the size of your sd-ext and how much is used
arsvendg said:
If I try to install from play, it says not sufficient space, even if I try to restore from titanium, still no luck.
Click to expand...
Click to collapse
Same problem here. I tried to wipe caches and even recreated the partitions but still no luck with the stock a2sd.
robla1000 said:
Start Terminal. Type:
su
a2sd install
yes (move dalvik-cache)
no (don't move appdata) (yes will make device slower)
yes (restart)
After reboot you have more space, but don't see it.
Start terminal
su
a2sd diskspace
gives the size of your sd-ext and how much is used
Click to expand...
Click to collapse
Just wondering. Isn't the whole idea with the as2d to move the appdata to the sd-card?
arsvendg said:
Just wondering. Isn't the whole idea with the as2d to move the appdata to the sd-card?
Click to expand...
Click to collapse
App and appdata are different things:
The App it's the "core" and are loaded in the RAM when you start them, so if you move them to sdcard you get a slowdown only on the boot of the app itself
The Appdata it's the data created and used by the program to run, likes databases and so; if you move it to the sdcard you get a slowdown 'cause the program continuosly try to access it.
someone correct me if I'm wrong, i'm still learning the stuff
Long story short: normal A2SD+ methods (like DarkTremor or m2sd) only move a part of /data, linking the files; you will NOT see the increased space but your Apps will occupy less memory.
Data2sd method like data2sd or Amarullz A2SDX will "swap" the ext space with the internal data memory, giving you a visible increase in your internal space.
TL;DR if you have a fast SD card you can go for the latter, else stick to m2sd wich is a new and good method to move application!
For partitioning, I suggest you to use 4ext touch recovery, you can install it on your phone from 4ext.net and flash your new recovery directly from your phone (you need to have S-OFF!); after you have your new recovery flashed:
make a backup of your SD card data (you have to format it)
Reboot in recovery
Go to "Tools"
"partition sd card ->"
"Remove all partitions and start from scratch"
Now you have to set, in order, you primary ext dimension, your secondary ext dimension and the swap dimension
I usually go for - 1st ext: 1024 -2nd ext: 0 - swap: 0
Select ext4 for your first ext partition
Now you are ready to use wathever a2sd method you want.
Hope this will help you!
Regards,
Ryther
Ahh I'm just going to leave this here.
All the ICS Devs have done a great job - Kudos to them.
But if you want a bugfree ROM which works well, for now - GIVE UP on ICS.
Go back to CM7 - it'll do you good.
Don't give up on ICS because SOME people have issues. I've ran an ICS build with a2sd working just fine no bugs whatsoever. I have not tried a data2ext script on an ICS build though so I don't know about that.
It's the second time I try to configure my phone for Apps2SD, and it just doesn't seem to work! I've got a HTC Desire GSM, running MIUI 2.4.13. This time i've configured my phone to Apps2SD following the guide in this thread: http://miuiandroid.com/community/th...tall-of-miui-with-enough-room-for-apps.15808/
I did everything just like he said, and with regards to the partitions, I allocated 1024MB to one partition, 0 to the next partition, and 512MB for the swap partition. Then I chose EXT3. But there is no diference in my storage... I still only have 29MB free (out of 105MB) after installing apps.
Please help! What am doing wrong? This is really frustrating me..!
In order to work properly, the partitions must be created in this order: fat32, ext4, swap. Did you created them in this way? I suggest also to make partitions on your sd-card with gparted live or 4ext recovery (search this in the development section).
If you did it like that, in miui you have to enable a2sd:
download terminal emulator from market.
Type:
su
(enter)
a2sd reinstall
(enter)
(the phone after a while reboots)
if you want to move also dalvik to have more space (but less performance) type in emulator:
su
(enter)
a2sd cachesd
paolo-red1 said:
In order to work properly, the partitions must be created in this order: fat32, ext4, swap. Did you created them in this way? I suggest also to make partitions on your sd-card with gparted live or 4ext recovery (search this in the development section).
If you did it like that, in miui you have to enable a2sd:
download terminal emulator from market.
Type:
su
(enter)
a2sd reinstall
(enter)
(the phone after a while reboots)
if you want to move also dalvik to have more space (but less performance) type in emulator:
su
(enter)
a2sd cachesd
Click to expand...
Click to collapse
I've tried both terminal codes. Something is definitely working, because I've installed all the apps I used to have before and a few more, without moving anything to the SD card, and I've still got 27MB out of ~150MB.
Question is: If all the apps are stored on the SD card, why does the internal memory keep running out as I install more apps?
liranh said:
I've tried both terminal codes. Something is definitely working, because I've installed all the apps I used to have before and a few more, without moving anything to the SD card, and I've still got 27MB out of ~150MB.
Question is: If all the apps are stored on the SD card, why does the internal memory keep running out as I install more apps?
Click to expand...
Click to collapse
It's normal. A2sd move app (and dalvik if you type cachesd), but app's data remain in internal. If you need more space you have to choose data2sd script, it uses ext partition like internal, but affecting performance, overall if you have a low class SD-card. The best choice is to move app and, if you need more space, to move dalvik. Darktremor's a2sd is the first, most solid and stable script to do this, and it does very well.
paolo-red1 said:
It's normal. A2sd move app (and dalvik if you type cachesd), but app's data remain in internal. If you need more space you have to choose data2sd script, it uses ext partition like internal, but affecting performance, overall if you have a low class SD-card. The best choice is to move app and, if you need more space, to move dalvik. Darktremor's a2sd is the first, most solid and stable script to do this, and it does very well.
Click to expand...
Click to collapse
Okay that makes a lot of sense, thank you.
I've got a class 6 microSD card. Is that good enough for data2sd? And how do I go about doing it? Am I going to need to wipe and partition all over again, or is the current configuration I've got sufficient?
liranh said:
Okay that makes a lot of sense, thank you.
I've got a class 6 microSD card. Is that good enough for data2sd? And how do I go about doing it? Am I going to need to wipe and partition all over again, or is the current configuration I've got sufficient?
Click to expand...
Click to collapse
Yes, class 6 is good. I have it too. But use data2sd only if you need more space. If you don't, don't use it, your phone may lag, have less responsiveness, etc..
You can find MIUI-XJ in developer section that has data2sd implemented.
Also you can try other script like m2sd by dk_zero-cool and xa2sdx by amarullz.
I never use install them separatly, so read instructions in their trhead.
Maybe you have only to wipe dalvik and cache but I am not sure.
paolo-red1 said:
Yes, class 6 is good. I have it too. But use data2sd only if you need more space. If you don't, don't use it, your phone may lag, have less responsiveness, etc..
You can find MIUI-XJ in developer section that has data2sd implemented.
Also you can try other script like m2sd by dk_zero-cool and xa2sdx by amarullz.
I never use install them separatly, so read instructions in their trhead.
Maybe you have only to wipe dalvik and cache but I am not sure.
Click to expand...
Click to collapse
Okay perfect. Thanks again for all your help
What the title says.
Fully rooted phone, sd card partitioned with 512mbyte ext, and CWM 4.0.1.4.
I keep running out of memory when installing apps, so I'm guessing a2sd isn't "on". What do I do?
blesavidanac said:
What the title says.
Fully rooted phone, sd card partitioned with 512mbyte ext, and CWM 4.0.1.4.
I keep running out of memory when installing apps, so I'm guessing a2sd isn't "on". What do I do?
Click to expand...
Click to collapse
Hi,
You can just install the croniccorey's INT2EXT+ from link
http://forum.xda-developers.com/showthread.php?t=1716124
Good luck.
iyigit said:
Hi,
You can just install the croniccorey's INT2EXT+ from link
http://forum.xda-developers.com/showthread.php?t=1716124
Good luck.
Click to expand...
Click to collapse
To my understanding, MildWild comes with a built-in a2sd feature. I just can't figure out how to activate it.
blesavidanac said:
To my understanding, MildWild comes with a built-in a2sd feature. I just can't figure out how to activate it.
Click to expand...
Click to collapse
Bump.
I'm not sure if a2sd is enabled by default in Mildwild. You can try to install something like Quick System Info app which shows you A2SD storage if exists. If you won't see A2SD storage here, it's most probably inactive. Then download Terminal Emulator and follow those steps:
1) run Terminal Emulator
2) type 'su' a press enter
3) allow root access in the popup query
4) type 'a2sd install' and press enter
5) reply to questions in this order - y n y (dalvik to card - yes, data to card - no, reboot - yes)
6) you're done
rudiik said:
I'm not sure if a2sd is enabled by default in Mildwild. You can try to install something like Quick System Info app which shows you A2SD storage if exists. If you won't see A2SD storage here, it's most probably inactive. Then download Terminal Emulator and follow those steps:
1) run Terminal Emulator
2) type 'su' a press enter
3) allow root access in the popup query
4) type 'a2sd install' and press enter
5) reply to questions in this order - y n y (dalvik to card - yes, data to card - no, reboot - yes)
6) you're done
Click to expand...
Click to collapse
Thanks!
Quick System Info says 473mb (441mb free) A2SD storage. Terminal emulator says "a2sd not found". Is there a feature to check if it IS already enabled and working?
EDIT: Settings -> Storage -> Internal storage tells me there's only 148mb total space, so something isn't working.
blesavidanac said:
Thanks!
Quick System Info says 473mb (441mb free) A2SD storage. Terminal emulator says "a2sd not found". Is there a feature to check if it IS already enabled and working?
EDIT: Settings -> Storage -> Internal storage tells me there's only 148mb total space, so something isn't working.
Click to expand...
Click to collapse
i got the same problem and same rom it says 1750 mb a2sd is free but he cant seem to find it ...
i will try to change rom and update here i just hope its not a partition problem(i will try mildwild 5.2 first than i will try others)
Edit:mildwild 5.2 does the same problem i am going to try a diffrent rom now prbably old miui version
Edit2:the a2sd works pefect with the old miui so it is a rom problem we should notify to the developer of mildwild
blesavidanac said:
Thanks!
Quick System Info says 473mb (441mb free) A2SD storage. Terminal emulator says "a2sd not found". Is there a feature to check if it IS already enabled and working?
EDIT: Settings -> Storage -> Internal storage tells me there's only 148mb total space, so something isn't working.
Click to expand...
Click to collapse
your A2SD appears to be working to an extent, but only used 32MB. you should use a better app like 'diskusage' to browse all your partitions, and check the apks are stored on the sd-ext
your internal storage only reads 148MB total because you are still on stock hboot (probably also still s-on?) this means you currently have 250MB system size, but your rom system size is only ~140MB and you're wasting 110MB.
you should be s-off with cm7r2 hboot to maximise space (145MB system, wastes only ~5MB, bigger 287MB internal memory)
depending on the A2SD script, your internal memory still won't appear as "internal + ext partition" or "148MB + 512MB" in your case. your internal should be used for app data and dalvik cache if it fits, and app apk's in sd-ext. you shouldnt have to manually 'move to sd' either.
recommend further reading here.
512MB partition is also quite small, i'd recommend at least 1GB, no more than 1.5GB. partition should be made with gparted or 4ext recovery only.
xzfzx said:
i got the same problem and same rom it says 1750 mb a2sd is free but he cant seem to find it ...
i will try to change rom and update here i just hope its not a partition problem(i will try mildwild 5.2 first than i will try others)
Edit:mildwild 5.2 does the same problem i am going to try a diffrent rom now prbably old miui version
Edit2:the a2sd works pefect with the old miui so it is a rom problem we should notify to the developer of mildwild
Click to expand...
Click to collapse
the rom should have a built in method of A2SD, you may need to activate it, search the thread. others use different scripts like int2ext.
the same applies though, you should be s-off with cm7r2 hboot to maximise space. check everything using 'diskusage'
eddiehk6 said:
your A2SD appears to be working to an extent, but only used 32MB. you should use a better app like 'diskusage' to browse all your partitions, and check the apks are stored on the sd-ext
your internal storage only reads 148MB total because you are still on stock hboot (probably also still s-on?) this means you currently have 250MB system size, but your rom system size is only ~140MB and you're wasting 110MB.
you should be s-off with cm7r2 hboot to maximise space (145MB system, wastes only ~5MB, bigger 287MB internal memory)
depending on the A2SD script, your internal memory still won't appear as "internal + ext partition" or "148MB + 512MB" in your case. your internal should be used for app data and dalvik cache if it fits, and app apk's in sd-ext. you shouldnt have to manually 'move to sd' either.
recommend further reading here.
512MB partition is also quite small, i'd recommend at least 1GB, no more than 1.5GB. partition should be made with gparted or 4ext recovery only.
the rom should have a built in method of A2SD, you may need to activate it, search the thread. others use different scripts like int2ext.
the same applies though, you should be s-off with cm7r2 hboot to maximise space. check everything using 'diskusage'
Click to expand...
Click to collapse
there is no really need to change worlds now as i said on a old rom of miui the a2sd works fine and it does need to be activated with th terminal
in mildwild 5 it did work too but i cant download it anymore so i cant check...if i am going to the terminal in mildwild rom and do this:
$su
#a2sd check
a2sd not found
#a2sd install
a2sd not found
#exit
$exit
this is from my memory i am not sure if the output is accurate but still...
any way if i was in s on and no ext4 recovery for almost 3 years with this phone and alot of diffrent roms that used a2sd and it worked perfectly fine like the old version of miui i am using right now so i dont feel a need to change it but...i might listen to you anyway because i have a spare time XD
so can you give me a link to a guide of ext4 recovery and s off (i did look for an old guide i saw here but i cant seem to find it i am not that lazy!) i will stay with stock hboot for now...(i do use simple roms i am not going to move from GB for now because they are the most stable roms and a2sd method is good enough for my needs(i might not be so involved in pros or cons of other methods but this one is the simplest isnt it?))
(sorry for my bad english thank you for your reply)
eddiehk6 said:
your A2SD appears to be working to an extent, but only used 32MB. you should use a better app like 'diskusage' to browse all your partitions, and check the apks are stored on the sd-ext
your internal storage only reads 148MB total because you are still on stock hboot (probably also still s-on?) this means you currently have 250MB system size, but your rom system size is only ~140MB and you're wasting 110MB.
you should be s-off with cm7r2 hboot to maximise space (145MB system, wastes only ~5MB, bigger 287MB internal memory)
depending on the A2SD script, your internal memory still won't appear as "internal + ext partition" or "148MB + 512MB" in your case. your internal should be used for app data and dalvik cache if it fits, and app apk's in sd-ext. you shouldnt have to manually 'move to sd' either.
recommend further reading here.
512MB partition is also quite small, i'd recommend at least 1GB, no more than 1.5GB. partition should be made with gparted or 4ext recovery only.
the rom should have a built in method of A2SD, you may need to activate it, search the thread. others use different scripts like int2ext.
the same applies though, you should be s-off with cm7r2 hboot to maximise space. check everything using 'diskusage'
Click to expand...
Click to collapse
Thanks for the reply.
I haven't really had time to look into until now. I was s-off, but with stock hboot. Flashed cm7r2 and I now have ~280mb free! So that's step one. I'll continue searching for a solution to the sd2ext or a2sd or whatever it is, though. It should be built-in. Going to play around with it a bit, and see if there's something I can do. If not, I'll ask another question!
Thanks for helping out! It can get a little confusing, all this.