Develop Bugs

[DEV][PORT]AOKP ICS 4.0.x Galaxy Gio

because of some ruiner, this thread is now closed and discontinued​

because of some ruiner, this thread is now closed and discontinued​

do you have the permission from Maclaw? if not... he will be very angry

Very nicee i'll flash it today how is batery life??
Sent from my GT-S5660 using xda premium

jaapteeuw12 said:
Very nicee i'll flash it today how is batery life??
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
i just test this yesterday, i think it will last 6-7.5 Hours for daily use
tioammar said:
do you have the permission from Maclaw? if not... he will be very angry
Click to expand...
Click to collapse
my friend porting the AOKP, not the CM9..
though the Adreno team already got the permission for the CM9 so i just need the permission of Team Adreno.. as far as my logic go

Bilgets said:
i just test this yesterday, i think it will last 6-7.5 Hours for daily use
my friend porting the AOKP, not the CM9..
though the Adreno team already got the permission for the CM9 so i just need the permission of Team Adreno.. as far as my logic go
Click to expand...
Click to collapse
but you said you use CM9 from GalaxyICS as base... you must be don't know about the problem about MIUIv4 for Gio yes ?

tioammar said:
but you said you use CM9 from GalaxyICS as base... you must be don't know about the problem about MIUIv4 for Gio yes ?
Click to expand...
Click to collapse
Base of the AOKP that Team Adreno make...

Is it more stable than cm9?
Sent from my GT-S5660 using XDA

thath should not be asked anyway but i dont really know as i not yet tested the Latest CM9

I tried two times to install it but it freezes at Installing System... what can i do ?

I tried your rom, it's stable and smooth but there's still a little bit of flickering. But keep up the good work, you're doing it right!

Why modder cannot write: "It's only modded by me, based on CM9 ny Macław"... Tell me why?
(Not to delano, in this topic is written only port, so I'm not angry on delano ;-))

forget it

Macław said:
Why modder cannot write: "It's only modded by me, based on CM9 ny Macław"... Tell me why?
(Not to delano, in this topic is written only port, so I'm not angry on delano ;-))
Click to expand...
Click to collapse
thanks for editing your post so nobody have a negative opinion about me and ofcourse delano
guitarhero2 said:
I tried your rom, it's stable and smooth but there's still a little bit of flickering. But keep up the good work, you're doing it right!
Click to expand...
Click to collapse
sry this isn't my rom
toxxyk said:
I tried two times to install it but it freezes at Installing System... what can i do ?
Click to expand...
Click to collapse
what recovery do u use? and what freeze mean.. can u tell me de detail?
my step to flash this were :
Backup > Factory Reset > wipe dalvik cache > flash > reboot.. and it works ok

I made aokp for g fit then ace ..
Now it comes to gio also
Sent from my GT-S5670 using Tapatalk 2 Beta-5

sonudarock said:
I made aokp for g fit then ace ..
Now it comes to gio also
Sent from my GT-S5670 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
wow, the real owner is coming i love your work..
so will you make a new thread seperated with this one, or?
========
report : gallery seems to work with other apps.. so this is the system apk fault! lol

This rom has flickering.
We didn't published kernel sources with fixed flickering.

This uses Maclaw's kernel, so you do need his permission. Did you ask?

Our kernel? [email protected]? ...
We have to protect next releases.
Sent from my GT-S5660 using XDA

marcin1147 said:
Our kernel? [email protected]? ...
We have to protect next releases.
Sent from my GT-S5660 using XDA
Click to expand...
Click to collapse
No.
It's my kernel
[email protected]
It's merged with my cf-root kernel of miui.
Who said it taken from yours?
Sry.
It's pure from my own.
I hope u understand.
Cz look at CPU Scaling.
I added 672 748 768.
There UC kernel
Sent from my GT-S5660 using Tapatalk

[AOSP] [JB] AOSP JB for the galaxysmtd

Finally a JB AOSP ROM for our device!
This is pure Android jellybean!
The way how android means to be!
There are a lot of bugs in this ROM! it is an extremely early build! Maybe it wont boot or you will get an error while flashing! Dont worry guys! The bugs and errors will be fixed ASAP!
alpha 1:
*Latest updates in the AOSP JB branch
*First build for the SGS!
*Using cyanogenmod stock kernel for now! Ill change the kernel later!
Download link:
-Alpha 1: https://www.dropbox.com/s/b6rkksdloqxmui6/full_galaxysmtd-ota-eng.jellybean.zip?m
Im looking for someone to work with! Someone who can work with Source Building etc!
Again: dont worry if this rom wont work i will do my best to fix it!

for me

gitch101 said:
for me
Click to expand...
Click to collapse
Thank you
Sent from my GT-I9300 using xda premium

I was waiting for this. Thank you.

hmm whats that ??? Its just normal AOSP JellyBean ???
They are allready stable AOSP roms , like SlimJB...

Vlad87do said:
hmm whats that ??? Its just normal AOSP JellyBean ???
They are allready stable AOSP roms , like SlimJB...
Click to expand...
Click to collapse
That is what most of us are waiting for, after onecosmic's (TeamNYX's) AOSP

Vlad87do said:
hmm whats that ??? Its just normal AOSP JellyBean ???
They are allready stable AOSP roms , like SlimJB...
Click to expand...
Click to collapse
I dont think so buddy!
there is a real difference between slim jb and team nyx rom!

So this will be pure Jelly Bean?

Eleve11 said:
So this will be pure Jelly Bean?
Click to expand...
Click to collapse
Jupp
Could someone try out my work?
so i can work further on it!

At last - I've been waiting for this for ages.
Good luck with this ROM!

Does anyone test this?
Going to flash it to see how it performs.
Sent from my GT-I9000 using Tapatalk 2

Yeah I am interested in this project...Downloading it right now will report asap
---------- Post added at 01:07 PM ---------- Previous post was at 01:04 PM ----------
Vlad87do said:
hmm whats that ??? Its just normal AOSP JellyBean ???
They are allready stable AOSP roms , like SlimJB...
Click to expand...
Click to collapse
AOSP and Slim are different ...Slim has all the customizations like ASS and all AOSP is just the pure Android

Finally aosp jb !
Sent from my GT-I9000 using xda app-developers app

Didn't boot for me.
Sent from my GT-I9000 using Tapatalk 2

albertobom said:
Didn't boot for me.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Could you be a bit cleaner?
What is happening on boot?

albertobom said:
Didn't boot for me.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
+1

Came from cm10. Wiped data, cache and dalvik cache. Installed the rom. Rebooted but couldn't get past samsung boot screen. Was also not able to enter cwm.
Sent from my GT-I9000

gangstaboy13 said:
Could you be a bit cleaner?
What is happening on boot?
Click to expand...
Click to collapse
Nothing. Stays on Galaxy S first screen.
Sent from my GT-I9000 using Tapatalk 2

albertobom said:
Nothing. Stays on Galaxy S first screen.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Ok guys the problems are clean working hard to fix it!
Could anyone give a logcat?

No boot back to c-rom
Sent from my GT-I9000 using xda app-developers app C-Rom Bean the best jb ROM for i9000 for sure.

cm10.1 boot problem

I updated my HTC One V to an Unoffical version of CM10 ( Cyanogenmod ). An Official version isn't available yet. I had to:
Unlock the bootloader
Install twrp recovery
Root the phone
Boot into recovery and make a backup then wipe the phone.
Install cm10.zip
My first attempt failed because I didn;t realise you had to flash a custom kernel that supports CM10.I flahed the latest HELLBOY kernel:
boot-HELLBOY-CM10-201302142348.img
Success. I then installed the Google Jelly Bean apps & it was all good.
I've since realised thee is a later version ( 10.1 ) for my phone:
cm-10.1-20130217-UNOFFICIAL-primou.zip
Definately right for may phone as the CM10 that works was also for primou.
Now I boot into recovery & wipe the phone as before
Then install cm-10.1-20130217-UNOFFICIAL-primou.zip
Reboot phone
"HTC it's brilliant" splash screen appears and then nothing. With the working CM10 I get a Cyanogenmod boot animation.
I've restored the phone back to the working CM10 so not bricked.
Can anyone tell me where I'm going wrong ? I looked for a later HELLBOY kernel that supports 10.1 but couldn't find one.

Any rom based on Android 4.2.1 for primo u is not at all stable at this time.... Infact, it doesn't even boot.... So, stick with 4.1 for now...

rohov said:
Any rom based on Android 4.2.2 for primo u is not at all stable at this time....
Click to expand...
Click to collapse
FTFY
Sent from my One V

This Rom does boot. You can either try Maxwen's 4.2 kernel or you can extract boot from the zip. But primou version does not have gsm components working so you can't receive our make calls.
Sent from my One V using xda app-developers app

收件人： cm10.1 boot problem
Where did you download cm - 10.1-20130217 - UNOFFICIAL - primou.zip？could you tell me？
Sent from my HTC T320e using xda premium

Ruling said:
Where did you download cm - 10.1-20130217 - UNOFFICIAL - primou.zip？could you tell me？
Sent from my HTC T320e using xda premium
Click to expand...
Click to collapse
its available via goo manager....dont try it....doesnt even boot

收件人： cm10.1 boot problem
thanks. maybe you can try pac's boot.img
Sent from my HTC T320e using xda premium

Ruling said:
thanks. maybe you can try pac's boot.img
Sent from my HTC T320e using xda premium
Click to expand...
Click to collapse
No kernel is working at dis time... Dats y no rom is booting....

rohov said:
No kernel is working at dis time... Dats y no rom is booting....
Click to expand...
Click to collapse
CM 10.1 does boot with Max's 4.2 kernel. Though as I said, it does not have GSM components active. Still everything else works.

收件人： cm10.1 boot problem
Abhishek.chaurasia said:
CM 10.1 does boot with Max's 4.2 kernel. Though as I said, it does not have GSM components active. Still everything else works.
Click to expand...
Click to collapse
yesterday i booted.use hellboy 20130215
cm10
Sent from my HTC T320e using xda premium

Just wanted to kno.... The dev of cm10.1 is fixing it...??? And why he didnt posted it on xda and only on goomanager....????

rohov said:
Just wanted to kno.... The dev of cm10.1 is fixing it...??? And why he didnt posted it on xda and only on goomanager....????
Click to expand...
Click to collapse
the rom is not booting so no need to post it on the foums

Sabbit said:
the rom is not booting so no need to post it on the foums
Click to expand...
Click to collapse
Someone here said it is booting, just data isn't enabling... I doubt that though
Sent from my One V

Sabbit said:
the rom is not booting so no need to post it on the foums
Click to expand...
Click to collapse
But people said its booting..... Just gsm components are not there....also, codefireX, pacman ar also not booting....but they are here....

CM 10.1
rohov said:
But people said its booting..... Just gsm components are not there....also, codefireX, pacman ar also not booting....but they are here....
Click to expand...
Click to collapse
It's for Rukin to answer . Here's a screenshot.

Abhishek.chaurasia said:
It's for Rukin to answer . Here's a screenshot.
Click to expand...
Click to collapse
Even i have flashed it.. was booting fine with Max's kernel. But there was no network.

This ROM was not even out for using. Lloir did not even mentioned it was ready to use, it just exists in goo.im
Latest working is CM10 10/1/13

CM 10.1 for base rom 4.2.2

Hello dev and modertors
I am New in android
i am using jelly bean 4.2.2 and i am also performance of Cm 10.1
so i requested to all dev and moderators that please make a cm 10.xxxxx that work on Rom 4.2.2 base
thanx in advace

Next time make an effort to use google search.
http://en.wikipedia.org/wiki/CyanogenMod#CyanogenMod_10.1

bongski55 said:
Next time make an effort to use google search.
yes i know that but i am request make a base of jelly bean 4.2.2 for cm 10 rom
Click to expand...
Click to collapse

mukeshpacheria said:
bongski55 said:
Next time make an effort to use google search.
yes i know that but i am request make a base of jelly bean 4.2.2 for cm 10 rom
Click to expand...
Click to collapse
Then I dont understand your point. If you read the article linked CM10.1.0 is already based on jb 4.2.2 as of june 2013. So what are you requesting?
Click to expand...
Click to collapse

bongski55 said:
mukeshpacheria said:
Then I dont understand your point. If you read the article linked CM10.1.0 is already based on jb 4.2.2 as of june 2013. So what are you requesting?
Click to expand...
Click to collapse
I think he is asking for existing pawitp's cm.. Which we could not flash on 4.2.2....
Sent from my GT-I9082 using Xparent Red
Click to expand...
Click to collapse

jetvis37 said:
bongski55 said:
I think he is asking for existing pawitp's cm.. Which we could not flash on 4.2.2....
Sent from my GT-I9082 using Xparent Red
Click to expand...
Click to collapse
Samsung's JB 4.2.2 is totally different from CM10.1.0 JB 4.2.2. All of CM versions are based on the GENERIC ANDROID code. You cannot make an CM based on Samsung's code.
Click to expand...
Click to collapse

jetvis37 said:
bongski55 said:
I think he is asking for existing pawitp's cm.. Which we could not flash on 4.2.2....
Sent from my GT-I9082 using Xparent Red
Click to expand...
Click to collapse
yes i cm10.1 not working on base 4.2.2 samsung glaxy grand it can be reverted on 4.1 and then flash
Click to expand...
Click to collapse

Best ROM for E975?

Sup guys. Im still using official CM 10.1.3, but I was wondering, whats the best ROM out there (by the best I mean stable and good battery life)
What do you guys recommend?
Thanks a lot

Stock...
Sent from my LG-E975 powering Stock 4.1.2

hasan4791 said:
Stock...
Sent from my LG-E975 powering Stock 4.1.2
Click to expand...
Click to collapse
Do you have a link for a stock version? I dont want to install a KDZ again

VorTeX Raptor said:
Do you have a link for a stock version? I dont want to install a KDZ again
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2430268

nch26 said:
http://forum.xda-developers.com/showthread.php?t=2430268
Click to expand...
Click to collapse
Ppl were reporting the GPS was not working with that ROM, but thx a lot!!!

VorTeX Raptor said:
Sup guys. Im still using official CM 10.1.3, but I was wondering, whats the best ROM out there (by the best I mean stable and good battery life)
What do you guys recommend?
Thanks a lot
Click to expand...
Click to collapse
original

Stock..best battery life
Sent from my LG-E975 using Tapatalk

VorTeX Raptor said:
Ppl were reporting the GPS was not working with that ROM, but thx a lot!!!
Click to expand...
Click to collapse
For me work very well.