Develop Bugs

[Q] Unable to restart in CMW recovery

I try to root my phone samsung SGH-T999V s3 of videotron. I use the method of this post: SGH-T999V Canadian GS3 (CWM + ROOT + CM9).
I had to redo the step with Odin 3 times to finally restart the CMW recovery. I remove the battery and finally I succeeded. I install ClockworkMod touch.
Now the problem is that I am unable to restart CMW Recovery mode. I tried the method of Vol + and Power Menu and the method by writing terminal emulator su, boot recovery and also ROM manager. It does not work.
Each time it is the stock android recovery which starts
I do not know what to do to install CyanogenMod 10.
I have read many post but I do not know if my phone is compatible with the other method.
Can you help me please

Reflash and take the battery out faster. ODIN will say it's succesfull and then the phone will overwrite it so the only way to know for sure is when you go into recovery.

Battery pulls are unnecessary. Delete or rename these.
/system/recovery-from-boot.p
/system/etc/install-recovery.sh
Reinstall recovery with rom or goo manager and reboot recovery.
Sent from my SGH-T999 using xda app-developers app

Thank you to both of you.
Now i can go in the recovery but i have a new problem.
When i try to install Cyanogen 10 it make me an error: (Status 7)
Installation aborted.
And now i don't know what to do.

DocHoliday77 said:
Battery pulls are unnecessary. Delete or rename these.
/system/recovery-from-boot.p
/system/etc/install-recovery.sh
Reinstall recovery with rom or goo manager and reboot recovery.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Can you delete those without being rooted?

psykhotic said:
Can you delete those without being rooted?
Click to expand...
Click to collapse
Where i'm supposed to go to delete this files?
And after delete these two files, i have to do the odin step to root my phone again with clockworkmod?
I'm sorry but i'm new in that.
Thant you for your help

psykhotic said:
Can you delete those without being rooted?
Click to expand...
Click to collapse
nope. Sorry bout that! I misread the op.
Marie1793 said:
Where i'm supposed to go to delete this files?
And after delete these two files, i have to do the odin step to root my phone again with clockworkmod?
I'm sorry but i'm new in that.
Thant you for your help
Click to expand...
Click to collapse
Ok, you do need root first to delete those files. Sorry for misunderstanding earlier.
Reflash your recovery with odin like before but make sure you uncheck suto reboot.
After complete, unplug and hold the power button untill it begins restarting. You need to be quick but as soon as the screen goes off, immediately press home and volume up while still holding power. Itll take a few seconds but after the blue text flashes at the top of the screen let go of power but keep holding the other two till you get recovery.
Now flash superSU or superuser and reboot.
Now you should be able to delete those files and reinstall recovery with goo or rom manager.
Im going by memory so you may want to get another opinion first. But I think you should be good.
Sent from my SGH-T999 using xda app-developers app

Thank you for all your help!!! I finally did it. I'm now happy.

Marie1793 said:
Thank you for all your help!!! I finally did it. I'm now happy.
Click to expand...
Click to collapse
Right on! Have fun!
Sent from my SGH-T999 using xda app-developers app

[q] Warning for any rooted Tab 7!!!!!

Today I finally rooted my Tablet 7 with some help from gr8nole here on XDA. Needless to say I was very happy and started downloading any and all apps that required root I was interested in. Unfortunately about an hour into my adventure I downloaded an app called LCD Density. DO NOT DOWNLOAD THIS APP. It soft bricked my device after changing the density from 240 to 160. I am now just trying to get back to square one again and have no idea what to do. I wiped the cache partition and re flashed root. Reboot same thing again. The Samsung screen is vertical not horizontal and doing the infamous glow from blue to white and back to blue and nothing more continuously. I am in CWM now and not really sure what step to take next as I don't want to risk a hard brick. I went to Rom Manager in CWM and no files were there when I went to use the backup feature What should I do?

PMK19 said:
Today I finally rooted my Tablet 7 with some help from gr8nole here on XDA. Needless to say I was very happy and started downloading any and all apps that required root I was interested in. Unfortunately about an hour into my adventure I downloaded an app called LCD Density. DO NOT DOWNLOAD THIS APP. It soft bricked my device after changing the density from 240 to 160. I am now just trying to get back to square one again and have no idea what to do. I wiped the cache partition and re flashed root. Reboot same thing again. The Samsung screen is vertical not horizontal and doing the infamous glow from blue to white and back to blue and nothing more continuously. I am in CWM now and not really sure what step to take next as I don't want to risk a hard brick. I went to Rom Manager in CWM and no files were there when I went to use the backup feature What should I do?
Click to expand...
Click to collapse
Try to restore your original firmare using odin.
Sent from my SM-T210R using xda app-developers app

trazfer said:
Try to restore your original firmare using odin.
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
That is what I would like to do but having a problem locating the original firmware. Any idea where it can be found?
Update...Found it on hotfile...going to see what happens now

PMK19 said:
That is what I would like to do but having a problem locating the original firmware. Any idea where it can be found?
Update...Found it on hotfile...going to see what happens now
Click to expand...
Click to collapse
Update...I have tried using the recovery tar. file from the developers board on page 1 post 2 and still no luck. I am now downloading another file from Hotfile but it says its going to be hours before its done downloading. I will try that and hopefully I can get out of this mess. Any other advice would be greatly apreciated. This is driving me crazy!!!!! HELP PLEASE

PMK19 said:
Update...I have tried using the recovery tar. file from the developers board on page 1 post 2 and still no luck. I am now downloading another file from Hotfile but it says its going to be hours before its done downloading. I will try that and hopefully I can get out of this mess. Any other advice would be greatly apreciated. This is driving me crazy!!!!! HELP PLEASE
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=45951129
Sent from my SM-T210R using xda app-developers app

trazfer said:
Try this
http://forum.xda-developers.com/showthread.php?p=45951129
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Thanks bro I actually just finally rebooted with the stock firmware. Brand new again but that's ok actually because all of the apps are backed up on Google. Now I just have to Root again...Can you believe that LCD crap is still lingering around on it? Say hello to the delete button!!!!
This is for the USA version.
http://hotfile.com/dl/240676398/83e0994/XAR-T210RUEAMG4-20130731154358.zip.html

PMK19 said:
Thanks bro I actually just finally rebooted with the stock firmware. Brand new again but that's ok actually because all of the apps are backed up on Google. Now I just have to Root again...Can you believe that LCD crap is still lingering around on it? Say hello to the delete button!!!!
This is for the USA version.
http://hotfile.com/dl/240676398/83e0994/XAR-T210RUEAMG4-20130731154358.zip.html
Click to expand...
Click to collapse
Well congrats on fixing ur tab. I suggest you odin flash twrp. Then using twrp flash universalroot.zip or infamous rom
Sent from my SM-T210R using xda app-developers app

trazfer said:
Well congrats on fixing ur tab. I suggest you odin flash twrp. Then using twrp flash universalroot.zip or infamous rom
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Thank you..Quick question. How do you get into Recovery with TWRP? I flashed it with Odin with the auto restart and with out. I used the CWM Recovery vol up power and home keys but it does not do anything. I am rooted already as well. Could that be the issue? Im using the TAR file too. I really would like to use the touch screen option instead of pushing buttons like a dinosaur

PMK19 said:
Thank you..Quick question. How do you get into Recovery with TWRP? I flashed it with Odin with the auto restart and with out. I used the CWM Recovery vol up power and home keys but it does not do anything. I am rooted already as well. Could that be the issue? Im using the TAR file too. I really would like to use the touch screen option instead of pushing buttons like a dinosaur
Click to expand...
Click to collapse
When you flash twrp or cwm in odin, you must uncheck autoreboot. Btw hold down power vol up and home button, when samsung logo appears, release the power button while still pessing down vol up and home
Sent from my SM-T210R using xda app-developers app

trazfer said:
When you flash twrp or cwm in odin, you must uncheck autoreboot. Btw hold down power vol up and home button, when samsung logo appears, release the power button while still pessing down vol up and home
Sent from my SM-T210R using xda app-developers app
Click to expand...
Click to collapse
Do you have a working link for TWRP works with Odin? I cant seem to get this one I have to work. Thanks in advance.

Did u try this? http://forum.xda-developers.com/showthread.php?p=45413459
Sent from my SM-T210R using xda app-developers app

Why didnt you just change the density back? Open build.prop, or push a stock version of it via adb or (idk if it is possible) via fastboot.
Then yoir problem should be solved. Those tweaks have got nothing to do with cache, or data, or so
Thats also why you need root and also the reason, why it is not so easy, to root some devices
But try brain.exe and everything should work, as it should
Sent from my LG-P760 using xda app-developers app

[Q] It keeps rebooting... recovery is not seandroid enforcement

Hi, I had the ROM DARTHSTALKER... and then I installed the Jedi elite to try a different one, but i wanted to go back to recover some messages of a girl, so I tried to restore the DARTHSTALKER backup from the ROM Jedi. It ended up in a loop, rebooting constantly... now I tried to UN-root it to begin from 0 and it keeps rebooting and telling me at the beginning in red: recovery is not seandroid enforcement and then some times if it loads, i says: optimizing apps... and then it says Finishing boot (it stays there for a while) and then the T-Mobil logo appears (it stays there for a while) and it reboot... After that it boots until it says: "process system isn't responding" and I have 2 options, wait or close, none of them work
How can I fix this I'm using TWRP Recovery
Thanks guys

Arturofm2 said:
Hi, I had the ROM DARTHSTALKER... and then I installed the Jedi elite to try a different one, but i wanted to go back to recover some messages of a girl, so I tried to restore the DARTHSTALKER backup from the ROM Jedi. It ended up in a loop, rebooting constantly... now I tried to UN-root it to begin from 0 and it keeps rebooting and telling me at the beginning in red: recovery is not seandroid enforcement and then some times if it loads, i says: optimizing apps... and then it says Finishing boot (it stays there for a while) and then the T-Mobil logo appears (it stays there for a while) and it reboot... After that it boots until it says: "the operating system stopped working" and I have 2 options, wait or close, none of them work
How can I fix this ? I'm using TWRP Recovery
Thanks guys
Click to expand...
Click to collapse
you will need manually flash most likely the saberkernel green. Once you have it up and running, update your twrp. The older versions of recovery had restore issues.

dragonstalker said:
you will need manually flash most likely the saberkernel green. Once you have it up and running, update your twrp. The older versions of recovery had restore issues.
Click to expand...
Click to collapse
An answer! Finally hope! I work with my phone.
Ok, but how do i introduce the kernel in my phone if when I plug it in the pc in download mode it seems to load but it doesn't load in My PC (the drivers are ok)
Is there anyway to install it from the pc using a program like odin? And what do you mean the old version? Which one do u recommend me?

Arturofm2 said:
An answer! Finally hope! I work with my phone.
Ok, but how do i introduce the kernel in my phone if when I plug it in the pc in download mode it seems to load but it doesn't load in My PC (the drivers are ok)
Is there anyway to install it from the pc using a program like odin? And what do you mean the old version? Which one do u recommend me?
Click to expand...
Click to collapse
Download the kernel .zip file and place on your sdcard . Hold down home+power+volup buttons to boot into recovery. Then flash the zip like any thing else.
Once back into the rom, use goomanager from play store. click menu and install recovery scrpit. Once done, it will ask you do you want to install twrp 2.6.3.7. yes you want to do this. Twrp 2.6.3.1 dn has known issues with the Note 3

dragonstalker said:
Download the kernel .zip file and place on your sdcard . Hold down home+power+volup buttons to boot into recovery. Then flash the zip like any thing else.
Once back into the rom, use goomanager from play store. click menu and install recovery scrpit. Once done, it will ask you do you want to install twrp 2.6.3.7. yes you want to do this. Twrp 2.6.3.1 dn has known issues with the Note 3
Click to expand...
Click to collapse
But what I'm saying is that I can't see my device on my pc, when I connect it, it doesn't show, and I have the driver installed. It's like it's loading but it never loads

Arturofm2 said:
But what I'm saying is that I can't see my device on my pc, when I connect it, it doesn't show, and I have the driver installed. It's like it's loading but it never loads
Click to expand...
Click to collapse
It's not going to. It does not have to time load the drivers for you to interact with. You will need to pull your sdcard out of the phone.

dragonstalker said:
It's not going to. It does not have to time load the drivers for you to interact with. You will need to pull your sdcard out of the phone.
Click to expand...
Click to collapse
I think you don't understand my friend: http://img819.imageshack.us/img819/4251/3pih.png

Arturofm2 said:
I think you don't understand my friend: http://img819.imageshack.us/img819/4251/3pih.png
Click to expand...
Click to collapse
Think he is saying you will need an SDCARD for this and u will need to load the file on the SDCARD first and then put it back in ur phone
Sent from my SM-N900T using Tapatalk

droidkevlar said:
Think he is saying you will need an SDCARD for this and u will need to load the file on the SDCARD first and then put it back in ur phone
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Oh ok, I have an external sdcard already, but how do I copy the kernel inside the sdcard without the phone?

When you made your backup, did you also back up the EFS.
Sent from my SM-N900T using xda premium

pitbull292006 said:
When you made your backup, did you also back up the EFS.
Click to expand...
Click to collapse
I'm guessing he did not...

the kernel file is a zip file. Put the SDcard in your computer, download the file onto your SDcard put the SDcard back into your phone and install it using TWRp
Sent from my SM-N900T using xda premium

pitbull292006 said:
When you made your backup, did you also back up the EFS.
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
dragonstalker I don't have the port to put an sdcard in my pc
I backed up everything and now I was seeing in the jedi rom that it comes with the saberkernel green...
I'm thinking to go tomorrow to Tmobil to see if i can change it, what a f..ing crap...

dragonstalker said:
the kernel file is a zip file. Put the SDcard in your computer, download the file onto your SDcard put the SDcard back into your phone and install it using TWRp
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
On here's what you do, as I had the EXACT same problem that you have. I fixed my brickloop by doing the following:
(I would backup your efs partition before doing this, just for completeness sake)*
Installed Stock firmware via Odin,*
Installed TWRP 2.6.3.2 via odin, rebooted to recovery
Did an "adb shell" when phone is in recovery mode to run commands via TWRP
From the ADB shell: Wiped the EFS partition with the following command:
mke2fs /dev/block/mmcblk0p12*
mkdir /efs
mount -t ext4 /dev/block/mmcblk0p12 /efs
(the last two commands probably did nothing, but thats what I did anyway)
Did a Factory Reset*
Then... reboot to system
Afterwards, no more boot looping, the phone successfully registered on the mobile network, and my IMEI is there and correct. Seems like the EFS partition can rebuild itself now I guess...These commands can also be ran from TWRP
Sent from my SM-N900T using xda premium
---------- Post added at 10:54 PM ---------- Previous post was at 10:48 PM ----------
Those commands can also be ran from TRWP via the terminal option
Sent from my SM-N900T using xda premium

pitbull292006 said:
On here's what you do, as I had the EXACT same problem that you have. I fixed my brickloop by doing the following:
(I would backup your efs partition before doing this, just for completeness sake)*
Installed Stock firmware via Odin,*
Installed TWRP 2.6.3.2 via odin, rebooted to recovery
Did an "adb shell" when phone is in recovery mode to run commands via TWRP
From the ADB shell: Wiped the EFS partition with the following command:
mke2fs /dev/block/mmcblk0p12*
mkdir /efs
mount -t ext4 /dev/block/mmcblk0p12 /efs
(the last two commands probably did nothing, but thats what I did anyway)
Did a Factory Reset*
Then... reboot to system
Afterwards, no more boot looping, the phone successfully registered on the mobile network, and my IMEI is there and correct. Seems like the EFS partition can rebuild itself now I guess...These commands can also be ran from TWRP
Sent from my SM-N900T using xda premium
---------- Post added at 10:54 PM ---------- Previous post was at 10:48 PM ----------
Those commands can also be ran from TRWP via the terminal option
Sent from my SM-N900T using xda premium
Click to expand...
Click to collapse
I'm going tomorrow to the store, let's see what happens, but I don't understand.. what failed? the TWRP?

Arturofm2 said:
I'm going tomorrow to the store, let's see what happens, but I don't understand.. what failed? the TWRP?
Click to expand...
Click to collapse
What version of TWRP are you using
Sent from my SM-N900T using xda premium

There not going to do anything for you at the store if your Knox counter is tripped, that voids the warranty instantly......
Sent from my SM-N900T using xda app-developers app

Quickvic30 said:
There not going to do anything for you at the store if your Knox counter is tripped, that voids the warranty instantly......
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
That's not true they don't check anything even you go in there and relaxed a defective device. You just wanna rain on his parade
Sent from my SM-N900T using Tapatalk
---------- Post added at 11:00 AM ---------- Previous post was at 11:00 AM ----------
janjannsen99 said:
That's not true they don't check anything even you go in there and return a defective device. You just wanna rain on his parade
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Sent from my SM-N900T using Tapatalk

I'm using the latest version of teamwin rec. I heard they have problems but when will they release the new version?
I tryied to put the phone back in stock rom and.that.doesn't even work, come on guys, you know more than me about this, what could I do?

Arturofm2 said:
I'm going tomorrow to the store, let's see what happens, but I don't understand.. what failed? the TWRP?
Click to expand...
Click to collapse
Not to sound like a jerk...but this is the reason why companies lock down bootloaders and what not. You can fix this issue that you caused by following a few steps or getting an SDCARD reader for your computer and transfer the files to it that way. They are dirt cheap. It is not Tmobiles fault that you screwed up a flash. Just my 2 cents.

[Q] How to root and install a recovery

I cant seem to find an updated guide with files to root and install a custome recovery on the sprint note 2 with 4.3 can someone help me find a link or get me the files etc?
Thanks

Recovery
I went to cyanogenmods website and ran the installer as directed. That installed cyanogenmod and rooted the device automatically, then you can download and flash any of the other custom ROMs on this site.

I rooted 4.3 with allinone toolkit clicking older variation and worked fine
Sent from my SPH-L900 using xda app-developers app

unknowne said:
I went to cyanogenmods website and ran the installer as directed. That installed cyanogenmod and rooted the device automatically, then you can download and flash any of the other custom ROMs on this site.
Click to expand...
Click to collapse
My note 2 is blocking the cyanogenmod installer. It says unartherized access to a secured area on your phone without authorization has been blocked.
I'm stumped just got this phone and it is a pain to root
---------- Post added at 08:42 PM ---------- Previous post was at 08:05 PM ----------
supertwin33 said:
I rooted 4.3 with allinone toolkit clicking older variation and worked fine
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Whoo dude that did not work at all boots to the samsung boot screen then black screens. What to do now? I can still get it into the bootloader mode by holding volume down power and home.

kingfish600 said:
My note 2 is blocking the cyanogenmod installer. It says unartherized access to a secured area on your phone without authorization has been blocked.
I'm stumped just got this phone and it is a pain to root
---------- Post added at 08:42 PM ---------- Previous post was at 08:05 PM ----------
Whoo dude that did not work at all boots to the samsung boot screen then black screens. What to do now? I can still get it into the bootloader mode by holding volume down power and home.
Click to expand...
Click to collapse
Do this
1. Boot into download/bootloader mode.
2. Connect to pc and use odin to flash twrp. Make sure you uncheck reboot and flash twrp in the pda slot.
3. Once flashed pull battery and disconnect from pc.
4. Press vol+ menu power buttons while inserting battery (yes it is difficult but can be done)
5. Now in recovery perform factory reset.
6. Flash this http://forum.xda-developers.com/showthread.php?p=36388145
7. Now reboot it will act/look weird but dont worry this is normal. It will reboot and take a long time to boot.
Now you are on stock mc2 (no knox anymore). Root using cf autoroot http://forum.xda-developers.com/showthread.php?p=33278464
Now use odin once again and flash your recovery again. Now you are rooted and have a custom recovery. Oh and you have a working phone again.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Do this
1. Boot into download/bootloader mode.
2. Connect to pc and use odin to flash twrp. Make sure you uncheck reboot and flash twrp in the pda slot.
3. Once flashed pull battery and disconnect from pc.
4. Press vol+ menu power buttons while inserting battery (yes it is difficult but can be done)
5. Now in recovery perform factory reset.
6. Flash this http://forum.xda-developers.com/showthread.php?p=36388145
7. Now reboot it will act/look weird but dont worry this is normal. It will reboot and take a long time to boot.
Now you are on stock mc2 (no knox anymore). Root using cf autoroot http://forum.xda-developers.com/showthread.php?p=33278464
Now use odin once again and flash your recovery again. Now you are rooted and have a custom recovery. Oh and you have a working phone again.
Before I do all of that...I discovered I can boot into TWRP and updated it to the newest version. Then I installed the cyanogen nightly onto the phone. Everything seemed to be working ok except I couldn't get any phone signal but wifi worked. I tried loading the dirty unicornes rom and the same thing happened . I then flashed cm 10.1 and the phone worked for calls but the asop keyboard kept crashing and couldn't login to the wifi network. I tried several installs with factory resets with the same results. If I follow the directions you listed will I be able to install these roms and the phone work for calls or am I missing another piece of the puzzle?
Click to expand...
Click to collapse

kingfish600 said:
jlmancuso said:
Do this
1. Boot into download/bootloader mode.
2. Connect to pc and use odin to flash twrp. Make sure you uncheck reboot and flash twrp in the pda slot.
3. Once flashed pull battery and disconnect from pc.
4. Press vol+ menu power buttons while inserting battery (yes it is difficult but can be done)
5. Now in recovery perform factory reset.
6. Flash this http://forum.xda-developers.com/showthread.php?p=36388145
7. Now reboot it will act/look weird but dont worry this is normal. It will reboot and take a long time to boot.
Now you are on stock mc2 (no knox anymore). Root using cf autoroot http://forum.xda-developers.com/showthread.php?p=33278464
Now use odin once again and flash your recovery again. Now you are rooted and have a custom recovery. Oh and you have a working phone again.
Before I do all of that...I discovered I can boot into TWRP and updated it to the newest version. Then I installed the cyanogen nightly onto the phone. Everything seemed to be working ok except I couldn't get any phone signal but wifi worked. I tried loading the dirty unicornes rom and the same thing happened . I then flashed cm 10.1 and the phone worked for calls but the asop keyboard kept crashing and couldn't login to the wifi network. I tried several installs with factory resets with the same results. If I follow the directions you listed will I be able to install these roms and the phone work for calls or am I missing another piece of the puzzle?
Click to expand...
Click to collapse
Twrp does not work for 4.4
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

jlmancuso said:
kingfish600 said:
Twrp does not work for 4.4
Can I use CWM? ie flash it with TWRP?
Click to expand...
Click to collapse
Click to expand...
Click to collapse

Cwm or philz (I recommend the latter)
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Cwm or philz (I recommend the latter)
can you link to where i can dl a copy of philz as a zip i can flash with twrp?
Click to expand...
Click to collapse

Look for it in the development thread. The op will have a link. Use 6.07.9 version and make sure it has a zip extension not md5.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Look for it in the development thread. The op will have a link. Use 6.07.9 version and make sure it has a zip extension not md5.
There is a newer one philz_touch_6.15.4-l900.zip would it be better?
Click to expand...
Click to collapse

kingfish600 said:
jlmancuso said:
Look for it in the development thread. The op will have a link. Use 6.07.9 version and make sure it has a zip extension not md5.
There is a newer one philz_touch_6.15.4-l900.zip would it be better?
Click to expand...
Click to collapse
Use 6.07.9 if you want to know why read the last few pages of the thread.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

jlmancuso said:
kingfish600 said:
Use 6.07.9 if you want to know why read the last few pages of the thread.
Thankx for the help i'll flash in the morning,
Click to expand...
Click to collapse
Click to expand...
Click to collapse

kingfish600 said:
jlmancuso said:
kingfish600 said:
Use 6.07.9 if you want to know why read the last few pages of the thread.
It worked great! I put FTW Annihilation MK4 1.0.0 on it and have been very happy with it.
Thanks for the help again!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse

i rooted via Kingo..
then download ROM manager and flash CWM touch....
backed up my ota 4.3....
and was all set...
Sent from my SPH-L900 using JellyBombed Tapatalk 2

[Q] Getting E:Signature not verified error while Rooting

Tring to root my Samsung Note 3 Neo N750- Followed exact steps as mentioned in thread below
http://forum.xda-developers.com/note-3-neo/orig-development/philz-recovery-build-1-t2857149
But at the time of installing zip from SD card, getting error E:\Signature not verified for whole file
and the device is not rooted!
Please help.
P.S. I am not too technical and trying rooting for the first time.

mohit.mair said:
Tring to root my Samsung Note 3 Neo N750- Followed exact steps as mentioned in thread below
http://forum.xda-developers.com/note-3-neo/orig-development/philz-recovery-build-1-t2857149
But at the time of installing zip from SD card, getting error E:\Signature not verified for whole file
and the device is not rooted!
Please help.
P.S. I am not too technical and trying rooting for the first time.
Click to expand...
Click to collapse
I think you are trying to Flash the SuperSu zip via Stock Recovery..
First flash Philz CWM recovery via odin and then flash SuperSu zip using Philz recory to get rooted..
Press thanks if helped..

kushal.arora16 said:
I think you are trying to Flash the SuperSu zip via Stock Recovery..
First flash Philz CWM recovery via odin and then flash SuperSu zip using Philz recory to get rooted..
Press thanks if helped..
Click to expand...
Click to collapse
Sorry, I am confused- what does this mean? " flash SuperSu zip using Philz recory"
Could you please provide step by step desc? thanks

mohit.mair said:
Sorry, I am confused- what does this mean? " flash SuperSu zip using Philz recory"
Could you please provide step by step desc? thanks
Click to expand...
Click to collapse
Okk.
1. Download Superuser zip from following link and copy the zip to internal memory..
http://download.chainfire.eu/396/SuperSU/
2. Download Philz recovery build 3 from following link
https://s.basketbuild.com/devs/rutvikrvr/hl3g/cwm
3. Download odin.
4. Switch off the phone and remove back cover as you will have to pull down battery in next step.
5. Put you phone in download (odin) mode.
6. Flash Philz recovery you just downloaded via odin, after it say Reset in odin and you phone vibrates, quickly pull down the battery.. Do not let the phone switch on.
7. Now go to recovery mode..
8. Flash SuperSu zip which you downloaded and copied in your phone's internal from there.
Rooted..

Wow! Worked seemless!! Rooted!! Thanks a ton!
Could you also let me know how can I remove Samsung bloatware??

..

mohit.mair said:
Wow! Worked seemless!! Rooted!! Thanks a ton!
Could you also let me know how can I remove Samsung bloatware??
Click to expand...
Click to collapse
Nice to know you are rooted..
Download Attached app Root Uninstall to remove system app (So called Blotwares)..
On the Top you will see System App/User App, tap it to switch between System or User Apps.. Then just tap on the apps you want to remove and press Uninstall on the bottom of the app..
There is also an option to backup the apps.
Don't Say, just PRESS Thanks <===============

Thanks yet again!
After Rooting. Android System seems to be eating toouch battery. Almost equal to Screen. See screenshot attached.
Any clue why?
Sent from my SM-N750 using XDA Free mobile app

mohit.mair said:
Thanks yet again!
After Rooting. Android System seems to be eating toouch battery. Almost equal to Screen. See screenshot attached.
Any clue why?
Sent from my SM-N750 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry, no Idea on this..

mohit.mair said:
Thanks yet again!
After Rooting. Android System seems to be eating toouch battery. Almost equal to Screen. See screenshot attached.
Any clue why?
Sent from my SM-N750 using XDA Free mobile app
Click to expand...
Click to collapse
You might have uninstalled important files...This is might be a side effects.
Do not play with root if you do not have enough knowledge what you are doing.