[FIXED] Can anyone post wifi files from 4.1.1? - Galaxy Note II Q&A, Help & Troubleshooting

Since I updated to 4.1.2 it seems like my Note 2 is no longer connecting to LEAP wifi networks. This seems to be a common issue with the S3 and N2 4.1.2 updates.
http://code.google.com/p/android/issues/detail?id=41377
Could someone post the /etc/wifi folder from 4.1.1? I read that copying that folder should fix the problem (tried copying the S3 files from the link above but my phone rebooted).
EDIT: Fixed, copied the wifi folder from a friend's 4.1.1 and changes permissions. LEAP now works

gabster21 said:
Since I updated to 4.1.2 it seems like my Note 2 is no longer connecting to LEAP wifi networks. This seems to be a common issue with the S3 and N2 4.1.2 updates.
http://code.google.com/p/android/issues/detail?id=41377
Could someone post the /etc/wifi folder from 4.1.1? I read that copying that folder should fix the problem (tried copying the S3 files from the link above but my phone rebooted).
EDIT: Fixed, copied the wifi folder from a friend's 4.1.1 and changes permissions. LEAP now works
Click to expand...
Click to collapse
Hi,
How do i gain Root Privileges? I am facing the same problem but it is not allowing me to overwrite the folder /etc/wifi
Regards,

appa73 said:
Hi,
How do i gain Root Privileges?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1896696 2nd post in the thread.

Hi,
Thank you very much. In the thread, there are 3 options given to root the Note 2. Which one is recommended? My requirement is only that WiFi should work.
Regards,

gabster21 said:
Since I updated to 4.1.2 it seems like my Note 2 is no longer connecting to LEAP wifi networks. This seems to be a common issue with the S3 and N2 4.1.2 updates.
http://code.google.com/p/android/issues/detail?id=41377
Could someone post the /etc/wifi folder from 4.1.1? I read that copying that folder should fix the problem (tried copying the S3 files from the link above but my phone rebooted).
EDIT: Fixed, copied the wifi folder from a friend's 4.1.1 and changes permissions. LEAP now works
Click to expand...
Click to collapse
Can you please share the 4.1.1 file in zipped format here.

Sure, here it is: https://www.dropbox.com/s/muv6stp3cpxxot7/Wifi.zip

Could u also share the required permissions for the folder and the files inside if its not asking too much?
Thanks in advance

OldBoy.Gr said:
Could u also share the required permissions for the folder and the files inside if its not asking too much?
Thanks in advance
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
you dont have to change the files permissions inside the folder, worked fine for me

sprkrt said:
you dont have to change the files permissions inside the folder, worked fine for me
Click to expand...
Click to collapse
Thank you very much for your prompt response and the screenshot. Much appreciated.

WIFI Files for Hong Kong 4.1.1 ROM
I upgraded to 4.1.2, but account wifi problems, I want to replace with 4.1.1 wifi folders/files. My Hong Kong 4.1.1 ROM (before upgrading to 4.1.2) was N7100ZSALK3. Are the 4.1.1 wifi files the same for U.S. and Hong Kong ROMS? If so, then I should be able to use the wifi files/folders posted on this thread. If not, I have the Hong Kong 4.1.1 ROM (with system.img file) but don't know how to extract the wifi folders/files. Help appreciated.
Found system.img unpack instructions here: http://forum.xda-developers.com/showthread.php?t=1667081

can anyone help me? I'm using the phoenix rom, I'm with the problem of energy saver, when it is connecting to the wireless network is slow bad, having to activate and deactivate it every time. When I enter * # 0011 # and disable the same network gets normal quickly.
I changed the wifi folder using the folder posted here custom and stock, stock in the phone freezes when enabling wifi. using a custom folder does not activate the wifi., returning to the original folder wifi works with the defect mentioned before. Can anyone help me?

FIX
marvelspires said:
can anyone help me? I'm using the phoenix rom, I'm with the problem of energy saver, when it is connecting to the wireless network is slow bad, having to activate and deactivate it every time. When I enter * # 0011 # and disable the same network gets normal quickly.
I changed the wifi folder using the folder posted here custom and stock, stock in the phone freezes when enabling wifi. using a custom folder does not activate the wifi., returning to the original folder wifi works with the defect mentioned before. Can anyone help me?
Click to expand...
Click to collapse
Had the same problem. My way to fix it was to go back to Stock ROM and rood the device again :
1. First press *#1234# in your phone to see your PDA and CSC versions.
2. Go to this post and find the same PDA and CSC for the version you have right now.
3. Download and extract the stock ROM.
4. Flash it using the instructions in the second post of the link above.
5. Reroot with method one of this post.
You basically have to do this to restablish the original system files and folders. If it still won´t work, try using a static IP.
Hope it works.

Will this process hamper future firmware updates? Please

gabster21 said:
Since I updated to 4.1.2 it seems like my Note 2 is no longer connecting to LEAP wifi networks. This seems to be a common issue with the S3 and N2 4.1.2 updates.
http://code.google.com/p/android/issues/detail?id=41377
Could someone post the /etc/wifi folder from 4.1.1? I read that copying that folder should fix the problem (tried copying the S3 files from the link above but my phone rebooted).
EDIT: Fixed, copied the wifi folder from a friend's 4.1.1 and changes permissions. LEAP now works
Click to expand...
Click to collapse
working like charm man!! Phoenix 8.0

Hello there...
Im having same problem. I would like to give this a try. I have the etcwifi files, but dont know how to copy them to the phone folder...
I do I backup the original ones?
Thanks
---------- Post added at 09:44 AM ---------- Previous post was at 09:25 AM ----------
update on previous ... I have just installed root browser wich allows me to navigate in system folders.
I found etc/dhcp and etc/wifi
The zip file with the wifi fix, has much more files then the ones that exist in the phone system folder!
Wich one should I replace? and wich ones should I use, the stock or the custom files?

Related

[ROM] Stock ICS 4.0.3 for Motorola Xoom (Perfectly working Camera & HDMI)

Hello everyone,
This is what currently running on my xoom. Camera and HDMI is working flawlessly. Contacts and Calender syncs with my Gmail without any problem.
My Xoom model is MZ606, Wifi Only Xoom purchased in China.
This built is firstly shared by "changguangyu" who is one of the xda member. He actually shared the sbf file released by Motorola China thru a Chinese hosted server, and that is why many users in xda are sufferring the slow download. Many thanks to "changguangyu' who share the sbf file.
I extracted the sbf file into system.img and boot.img that can be flashed thru fastboot. This may be the safest way to flash without risk of bricking your xoom. Click below link to download the images.
HUBWF_W5.I.7.1-14_HUBBLEWIFIHKTWNGEN_P007_A035_HWwifi_hubble_Service1FF-extracted.zip
Below are steps to flash via fastboot. (of course, flash at your own risk)
Pre-requirement:
You have unlocked your bootloader. (how to unlock bootloader)
You have rooted your xoom. (How to root Motorola Xoom)
Note: This will wipe all your sdcard (internal storage) data, besure to backup before flashing.
Boot into recovery, do a Nand backup.
Copy the images (system.img and boot.img) to where the fastboot.exe is located.
Take out the external sdcard.
Enter into bootloader. (Power On Xoom, Vol+)
Open command prompt. (navigate to where the fastboot.exe, usually "C:\Program Files\Android\android-sdk\platform-tools\fastboot.exe", the right click > Open command windows here.
Type: fastboot flash boot boot.img
Type: fastboot flash system system.img
Type: fastboot erase cache
Type: fastboot erase userdata
Type: fastboot reboot
That's all, you will boot into ICS 4.0.3 shortly.
This is Stock ROM and for sure is not rooted, for those who would like to have root permission, download su-install.zip, copy it into your external sdcard, then flash it from recovery.
What I shared is not an sbf file, but the extracted images from the sbf files. (system.img and boot.img). One can always easily recover the xoom back to how it was by recovery. (eg. TiamatR4c Recovery)
Hope everyone enjoy!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The empty spaces are for icons of apps that I installed, what you can see here are stock apps.
You're really pimping this download, aren't you?
Like said earlier by Team EOS, people, download this at your own risk.
It should be noted this isn't exactly "stock" as we know it here. Sure, it's "stock" by Motorola standards, but this "stock" is ICS with Motorola's Blur additions because this release is Chinese based and not US based.
Bottom line: If you install this, you won't be getting a "Google Experience" like you're used to if you've used a XOOM in the US. Also, you could be exposing personal data since this ROM hasn't really been gone over with a fine tooth comb yet.
does this rom have working 3g?i have the mz601 europian model!!
Thank you, everything works great. Start up the game that did not work. super
Just gonna be brutally honest here guys. Do you really wanna expose your device to telephony framework in which the Chinese Government has influence? Call me paranoid, its all good. Paranoia keeps me out of trouble. The library files we pulled were completely torn apart by a security expert who is top notch in the industry. The libs are safe. I'm not gonna beat the bush on this one.
what about 3g on european xooms? will it work? i think not because i read wifi - am i correct?
bigrushdog said:
Just gonna be brutally honest here guys. Do you really wanna expose your device to telephony framework in which the Chinese Government has influence? Call me paranoid, its all good. Paranoia keeps me out of trouble. The library files we pulled were completely torn apart by a security expert who is top notch in the industry. The libs are safe. I'm not gonna beat the bush on this one.
Click to expand...
Click to collapse
if there is 1 thing you should do... its listen to this guy. Im just sayin
there is nothing to fall into paranoia. I installed rom the European Xoom wifi and everything works really well.
Thanks !!
No problem on my Wifi Only (MZ604), except that it "talks" to me in chinese (?) on first boot.
Note that first boot took something like 5 minutes for me.
All languages seems present, but default keyboard is not localized (no AZERTY) and has some chinese keys too.
Some chinese in menus too (in the "compatible" Zoom menu).
Thanks, nice Rom
It works OK on my US wifi Xoom. Everything seems to work
I'm usign it for 1h30 now... it seems very slow (comparing to eos), it lags a lot, applications start slowly (lot of "continue waiting/force close")
Is it only me ?
for me works very well. is very fast and so far no problems. start up games and apps that do not they run on other ics. for example, zen pinball.
AlEsC said:
I'm usign it for 1h30 now... it seems very slow (comparing to eos), it lags a lot, applications start slowly (lot of "continue waiting/force close")
Is it only me ?
Click to expand...
Click to collapse
It works very fast and smooth here. The only problem is that I get an error when I want to install su-install.zip from recovery. After that it seems to work but no apps which want root permission appear in the list. I don't get a toast eather when an app asks for the permission.
Even I don't see a toast and the file appears in the list. Rootpermission seems to work.
Everything works fine and smooth, Thanks
Is there the face unlock feature in this rom?
It is better when you share expirience with this ROM to mention which XOOM model you own. It is useless somebody just to say it works and another to say it doesn't work, but nobody says on which model.
Humpie said:
Is there the face unlock feature in this rom?
Click to expand...
Click to collapse
No facelock, and there's a lot's of option in the developer section, it can show CPU usage and other stuff, probably a developer build, speed seem ok here, no different than EOS build
The standard motorola are there, I do not see much difference from a stock build, not sure what is related to blurr...
All app are restoring from market with this one!
The NFS.KO module and CIFS.KO are there, nfs was missing from EOS build
After a reboot, no more lags and speed issues.
Same issue with su (no authorization asked, no toast notifications) but su works anyway. Can't upgrade su binary via Superuser.
The only (small) issue remaining is some chinese text in few menus and system preferences (but it's totaly usable).
French (and other) keyboad is available with the android keyboard (default selected keyboad is chinese motorola)
US Wifi (MZ604)
does this work on the Verizon lte xoom
zacholley said:
does this work on the Verizon lte xoom
Click to expand...
Click to collapse
I doubt this would be compatible with anything other than wifi...
---------- Post added at 05:54 PM ---------- Previous post was at 05:49 PM ----------
After installing SU I pointed Titanium on my SD to do a restore and the external1 is writable, this is new since under EOS it was not writable with titanium...
Also one application I use is relay (french magasine site relay.com) it was crashing with EOS build, now working
That's enough for me to keep this build! let's hope they do not hack my google account
---------- Post added at 06:10 PM ---------- Previous post was at 05:54 PM ----------
silfox2000 said:
It is better when you share expirience with this ROM to mention which XOOM model you own. It is useless somebody just to say it works and another to say it doesn't work, but nobody says on which model.
Click to expand...
Click to collapse
Again this is a wifi roms, you do have EOS availlable that suport non wifi version in this thread http://forum.xda-developers.com/showthread.php?t=1426838
I have MZ604 wifi, china is MZ606 asaik and some people bricked their tablet flashing, it is safe to flash in .img form you can revert as original poster mentioned! but this still exclude 4g tablet afaik
Hows motoblur? I would like a option of a skin on our tablet to play around with sometime.

Root for Samsung Galaxy Discover

Is there a root available for this phone?
Model: SGH-S730M
OS: Android 4.0.4
Baseband: A730MVLALJ5
Kernel: 3.0.8-1141737 [email protected] #1 Thu Oct 11 19:22:01 KST 2012
Build: IMM76D.S730MVLALJ5
Wonder whether one can use Odin to flash the Siyah v. 5 kernal, which works for SGS2, to root the Galaxy Discover SGH-S730?
fjcotter said:
Wonder whether one can use Odin to flash the Siyah v. 5 kernal, which works for SGS2, to root the Galaxy Discover SGH-S730?
Click to expand...
Click to collapse
well I tried that and mine failed on nand write start
sebzag said:
Is there a root available for this phone?
Model: SGH-S730M
OS: Android 4.0.4
Baseband: A730MVLALJ5
Kernel: 3.0.8-1141737 [email protected] #1 Thu Oct 11 19:22:01 KST 2012
Build: IMM76D.S730MVLALJ5
Click to expand...
Click to collapse
Ive also been looking to root my galaxy sgh s730m since the day i got it , but havent had much success at all
i did happen to find an unlock for 21.99$ it works great , but would love to have this phone rooted !!! ive tried the process of the ICS Root (Binary) but it failed and did not work , so i guess were stuck for a bit
I've actually used Kijiji today and found someone who said they can root the phone. The they are charging $25.00 I will get it done over the weekend and post back to let you know how all is. I'm gonna try to ask him what program or softwares he used to root this phone
Sent from my SGH-S730M using xda app-developers app
The kernal in my Samsung Galaxy Discover has the last 3 characters listed as "LJ5". A kernal similar to LJ5 which works in a Samsung phone under the ICS enviromnment ma y work.
Has anyone tried the Root_with_Restore_by_Bin4ry_v18 method yet? This file which works in Samsung Galaxy S2 and other phones rquires no flashing of kernal.
There are several sites which claim to unlock the Samsung Galaxy Discover with prices ranging from $7.29 to $14.99 to $20. But it would be more challenging to root the phone and have superuser privilege to do changes.
I tried that one as well and got a mounting error
Did the mounting error occur before or after you run "runme.bat" ?
after
bump
EventualDrip said:
bump
Click to expand...
Click to collapse
Well i wanted to bring my phone in to get rooted on saturday , but friday night the phone had turned off and wouldnt turn back on again , i have no idea what happened so i returned it to the store and got a different phone , i am done with android for the time being because it seems everytime i get an android it bricks itself or there is some sort of problem with it ,
i will be buying a samsung galaxy s2 though in the next few weeks , im sure that will be easy to root !
so as for me getting the phone rooted , that isnt going to happen unless i do come up with a way to get the discover again , but probally wont be buying it ...
Sorry for the inconvienice
Here is a mobile odin log I got.
But now the phone is unusable, wrong kernel or ramdisk I don't know (touchscreen problem)
Has anyone made progress with this? This phone is hurtin' and needs root...if not then a hammer...
What version of android does this device run? If you are running ICS you can give http://forum.xda-developers.com/showthread.php?t=2066041 a shot. Please also let me know, so I can add the device to the supported list, if it works.
well I ran two different versions Polaroid all in one 1.6 and 2.0 and they both seem to work fine with loading up and recognizing the phone however 2.0 said the phone was already rooted when it wasn't, there wasn't much I could do as seen in the screen shot below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I then tried 1.6 and that loaded up as well and asked if I wanted to root or root with google apps and framework so I choose just root it and it asked me to restore and rebooted just fine and said I wasn't rooted, so I'm a little confused. another screen shot below
also I should note that I am a complete idiot when it comes to this stuff, so I may have done something wrong or missed something
TeODH4 said:
What version of android does this device run? If you are running ICS you can give http://forum.xda-developers.com/showthread.php?t=2066041 a shot. Please also let me know, so I can add the device to the supported list, if it works.
Click to expand...
Click to collapse
Thanks for the tip! I tried it out but I got stuck at the waiting for phone to connect part. I'm sure I could get further, but I've lost all patience for this handset.
Rather than pull my hair out trying to fix this broken out of the box value phone, I returned it to the store for something a little more user (and battery) friendly.
Great can you upload a dump somewhere please, I bricked mine trying many ways and there are no stock rom anywhere.
I need, boot, recovery, and system.
Thank you
meldo said:
Clan you help me by uploading a dump of boot, recovery and system partition please.
I can help you by PM
Click to expand...
Click to collapse
Can you PM me the instructions to get those. I will try to get them for you tomorrow.
punk_zappa said:
Can you PM me the instructions to get those. I will try to get them for you tomorrow.
Click to expand...
Click to collapse
It's great to hear that you have rooted successfully the SGH-S730M. For me, I have bricked mine. It is appreciated if your can share the boot, recovery and partition image of your phone to us so that we can repair the brick.
It is fairly easy to backup your ROM:
1. Download and install ROM Manager from Google Play (the free version works great).
2. Run the program and click on "Backup Current ROM" and click OK - remember to have your external Sdcard inserted to have more space for the backup. By default the file name of the backup which will be created is your current date.
3. Look for the folder "clockworkmod" in the sdcard, in there you will find the folder backup, then in that folder you see a sub-folder with all backup files.
For me, I need the file "recovery.img" so that I can restore my blicked recovery of my Galaxy Discover.
Looking forward to hear from you the soonest.
Pls mail me the file to [email protected] or give the link so that I can download
Thank you in advance.
lvdoan
Sorry, folks. Been working on it for almost 6 hours with both romdump and ROM Manager. ROM manager cannot backup because "phone is unsupported". With romdump I am having "segmentation fault".
If you guys have anymore ideas please throw them in.
BTW, that unlock-root worked and it is very simple.

Does your phone have iZat?

EDIT: If you're missing iZat (read below to see if you already have it) I may have found a way to install it at http://forum.xda-developers.com/showpost.php?p=54558037&postcount=11, requires root though!
So I heard on reddit about this Qualcomm iZat, which is meant to improve the GPS location your phone gets, seems some people have it and some people don't.. I'm one of the people who don't
It sounds like all the chipsets have it though, just some phones don't have it enabled. My D855 doesn't have it, but on reddit it seems some people with the Sprint model have it and some others with the same model don't.
You can check if you have it by going to Settings -> Location -> Mode and underneath the standard options there'll be an Enhanced Location section where you can enable iZat.
If anyone here has it and wants to help us who don't out, uploading your /system/build.prop would be appreciated (it looks like theres some iZat settings in there)
If you could also check your apps to see if theres a Qualcomm iZat app installed that'd be swell
Nope, i don't have it i think?
Got a D855 (16GB) but no extra option whatsoever
Not seeing it in either of the locations you mentioned. (AT&T D850 here.)
harveydwijs2 said:
Nope, i don't have it i think?
Got a D855 (16GB) but no extra option whatsoever
Click to expand...
Click to collapse
geekaren said:
Not seeing it in either of the locations you mentioned. (AT&T D850 here.)
Click to expand...
Click to collapse
Well that's strange, I wonder why they're only enabling it on certain phones
For reference I found out about it from http://www.reddit.com/r/LGG3/comments/2c3k3s/lg_g3_and_geocaching_how_is_the_gps/cjbm9q0
Sounds like at least 3 people there have it, one on Sprint, one on Verizon and I don't know about the other one. Hopefully someone on XDA has it too and could maybe help us figure out how to get it ourselves.
AT&T G3 here, no iZat that I have found, even looking around rooted.
I'm on Sprint and I have it, I would upload the build.prop for you guys but I believe I need root and Sprint doesn't have root yet.
Sent from my LGLS990 using XDA Premium 4 mobile app
D855 european 3/32GB here, and I don't have it (I'm still on firmware 10a) but GPS works great, is very quick and accurate, no problem.
how to tell if you have one?
i see this line in my build.prop
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
Click to expand...
Click to collapse
deadh0b0 said:
I'm on Sprint and I have it, I would upload the build.prop for you guys but I believe I need root and Sprint doesn't have root yet.
Sent from my LGLS990 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ah well hopefully a root will show up soon, although maybe it's inside your KDZ too, could you maybe go to http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=*********** and change the stars to your IMEI, and copy the sw_url path here so we could take a look into it?
cnn888 said:
how to tell if you have one?
i see this line in my build.prop
Click to expand...
Click to collapse
I have the same lines in my build.prop, I think it means that iZat is disabled, but I'm not 100% sure, if you check the reddit post at http://www.reddit.com/r/LGG3/comments/2c3k3s/lg_g3_and_geocaching_how_is_the_gps/cjbm9q0 it says where you can find the setting for it.
Ah well hopefully a root will show up soon, although maybe it's inside your KDZ too, could you maybe go to http://csmg.lgmobile.com:9002/csmg/b...sn=*********** and change the stars to your IMEI, and copy the sw_url path here so we could take a look into it?
Click to expand...
Click to collapse
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=352596060206415 there it is, not sure if that is what you need, but that is my IMEI in the link.
deadh0b0 said:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=************** there it is, not sure if that is what you need, but that is my IMEI in the link.
Click to expand...
Click to collapse
Hmm well that's strange, normally it gives a link to the KDZ there, at least it does for me...
Luckily there's another way to check, I used your IMEI at http://csmg.lgmobile.com:9002/csmg/b2c/client/cs_auth_model_check.jsp?esn=************** and it gives a link to http://dl02.gdms.lge.com:5006/dn/downloader.dev?fileKey=PS47109201/LS990ZV4_04.51101.zip, that files not found but googling the name brings up some uploads from other people, time to start digging, thanks for your help :good:
Edit: Looks like we might have already cracked it
Doing searches inside the system.img in that zip for the string "IZat" I found an apk which wasn't on my phone, namely /system/app/xtra_t_app.apk, decompiling this apk showed it as being "com.qualcomm.location.XT". Seeing nothing else related to iZat that my phone didn't already have I took the plunge and installed it, and when I went to Location -> Mode I was greeted with a nice "com.qualcomm.location.XT has had to close" error. Darn! At least the enhanced location section was there, but it had no text under it, just an off/on button.
Determined, I looked into what was happening using adb logcat and it seemed like it was looking for an xt_native library which my phone was missing. I found that at /system/vendor/lib/libxt_native.so in the Sprint image and copied it to my phone, went back to settings and to my surprise the iZat option showed up!
Enabling it brought up some standard privacy policy b/s, and after saying OK to that it seems like it's enabled! Not sure how to check if its working exactly, but seeing as it looked like just this apk and lib file was missing I think it's working
A download for the apk and .so file is at https://mega.co.nz/#!DoQzgSjA!k8OeUr6W6pfhszd-kddVtzXNd7d1voWQsqN-A0D_0J8
To install it you'll need root (although there might be a way to package the .so inside the apk and skip needing it, this is my first time messing with Android since 2010 or so though so I'm a bit rusty with stuff like that)
First mount your system as r/w, running this works for me:
Code:
mount -o rw,remount -t ext4 /dev/block/platform/msm_sdcc.1/by-name/system /system
Copy the libxt_native.so to your /system/vendor/lib/ folder
Run chmod 644 libxt_native.so to set the permissions properly
Install the apk
Restart, go to the location settings and enjoy
The permissions for the apk are pretty crazy and mention some in-call purchasing things, this isn't my doing though. In case you want to verify it you can download the LS990ZV4_04.51101.zip, extract the tot using LGBinExtractor (might need a small mod to support Sprint tots), open the system.img with Ext2explore and compare the hash of the apk I uploaded with the /app/xtra_t_app.apk inside it.
Major thanks to deadh0b0 for helping us find where it was!
Anyway, enjoy
Edit: also, obligatory disclaimer that I'm not responsible for anything that happens by doing this! This is literally just-found-out-about-5-minutes-ago work, so I haven't exactly tested it long, my (3UK D855) phone seems to be working fine though, so hopefully all should be good!
Edit2: I think there might be some more to this, not getting any XT debug messages in logcat besides the settings changes, hmm..
I don't even know how it works but I have it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LGLS990 using Tapatalk
Any way to get it working on other versions than the Sprint G3?
Sent from my LG-D851 using Tapatalk
Out chipsets support it, at least my Snapdragon 801 supports it.
But I don't got the option...
http://www.qualcomm.com/snapdragon/processors/801
Sent from my LG-D852 using Tapatalk
D8855 V20i and iZat
Dear All,
Please note that LG D855 with V20i bumped image does not have by default the xtra_t_app.apk applied. However it has the related .so library. If xtra_t_app.apk is installed, the Enhanced Location Menu appears and it allows to turn it on/off.
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=354153062849400
This is my D855 and i dont have that option and i'm on 5.0 (20h). Can i install xtra_t_app.apk without the libxt_native.so in to my phone? thanks
saigon66 said:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=354153062849400
This is my D855 and i dont have that option and i'm on 5.0 (20h). Can i install xtra_t_app.apk without the libxt_native.so in to my phone? thanks
Click to expand...
Click to collapse
Check your:- /system/vender/lib/folder for the:- libxt_native.so file, if there go ahead, if not see Post #11......
This screen was taken after i installed the apk file. Did i miss something?
saigon66 said:
This screen was taken after i installed the apk file. Did i miss something?
Click to expand...
Click to collapse
My sister's got same blank menu with on/off slider...

LOLLIPOP EXTERNAL SD CARD WRITE FIX - FOB6 (Latest TMO ROM)

LOLLIPOP SD Card Write Fix (Atomatic Method)
Flashable ZIP Via Recovery (TWRP): (Flash by turning on phone with Power + Volume UP + Home Button)
Download:
http://g2k.serveftp.net/xda/tmo_n900t_extsd_fix_tekhd.zip
Now all apps will be able to write to external SD Card...
>>> This works with LolliPop stock rom... Tested already with Root Explorer, Titanium Backup, Opera, Dolphin Browser, Ttorrent... all able to perfectly write directly to external sd card. Test by copying any file to external sd card using Root Explorer.
TEKHD said:
LOLLIPOP SD Card Write Fix (Atomatic Method)
Flashable ZIP Via Recovery (TWRP): (Flash by turning on phone with Power + Volume UP + Home Button)
Download:
http://tek.serveftp.net/xda/tmo_n900t_extsd_fix_tekhd.zip
Now all apps will be able to write to external SD Card...
>>> This works with LolliPop stock rom... Tested already with Root Explorer, Titanium Backup, Opera, Dolphin Browser, Ttorrent... all able to perfectly write directly to external sd card. Test by copying any file to external sd card using Root Explorer.
> > > I just ask for a simple . . .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Doesnt work. I have N900T Lollipop Stock, its not rooted. I reboot it in stock recovery and Installed with some errors.
How I know that doesnt work: I have WiFi Transfer App, installed on phone, and folder is on phone. I moved and changed received folder on SD card, and when I send file from laptop to phone its say its interrupted. When I change received folder to phone its working. Tell me how to uninstall this what I installed with errors.
U need a custom recovery like twrp....read the OP
konfidential said:
U need a custom recovery like twrp....read the OP
Click to expand...
Click to collapse
can this be done with CWM?
Edit: I just dont want to root my N900T cause I see that a lot of ppl have issues after they rooted their Lollipop phones.
markokrstic said:
can this be done with CWM?
Edit: I just dont want to root my N900T cause I see that a lot of ppl have issues after they rooted their Lollipop phones.
Click to expand...
Click to collapse
Idk.. But you can try... Do a back up first
markokrstic said:
can this be done with CWM?
Edit: I just dont want to root my N900T cause I see that a lot of ppl have issues after they rooted their Lollipop phones.
Click to expand...
Click to collapse
can is a custom recovery that you have to be rooted to install
calexchelse said:
can is a custom recovery that you have to be rooted to install
Click to expand...
Click to collapse
well I gave up. I installed CWM and after update super su my screen dont want to show up. I flashed 5.0 stock with Odin to fix that.
markokrstic said:
well I gave up. I installed CWM and after update super su my screen dont want to show up. I flashed 5.0 stock with Odin to fix that.
Click to expand...
Click to collapse
By installing a custom recovery, your Knox counter is now tripped forever. Now you might as well reroot and customize to your heart's content!
JimSmith94 said:
By installing a custom recovery, your Knox counter is now tripped forever. Now you might as well reroot and customize to your heart's content!
Click to expand...
Click to collapse
And for what I need KNOX? I live in EU lol
markokrstic said:
And for what I need KNOX? I live in EU lol
Click to expand...
Click to collapse
Sorry, you said you were stock unrooted, so I thought you wanted to stay that way.
JimSmith94 said:
Sorry, you said you were stock unrooted, so I thought you wanted to stay that way.
Click to expand...
Click to collapse
no worries sir. Lollipop stock without root works fine, only that SD card write is issue, but ok, I can copy files from phone to card in file manager manually.
Hey @TEKHD will this work on DomPop v4.3?
AllanonX said:
Hey @TEKHD will this work on DomPop v4.3?
Click to expand...
Click to collapse
No... DomPop 4.x is based on Note 4... This file is for FOB6 (T-Mobile Lollipop 5 Note 3) Don't try it.
TEKHD said:
No... DomPop 4.x is based on Note 4... This file is for FOB6 (T-Mobile Lollipop 5 Note 3) Don't try it.
Click to expand...
Click to collapse
Copy that! Thanks for the info sir. Do you know of a working mod for 4.x? Thanks again in advance
AllanonX said:
Copy that! Thanks for the info sir. Do you know of a working mod for 4.x? Thanks again in advance
Click to expand...
Click to collapse
click on note 4 on my signature...
post #2
add that line... reboot... voila...
Is there anyway to do this manually on a rooted LG G3?
I dont have a custom recovery to flash the first file.
Cheers
MMM
Works fine with CM12.1 on my Xperia Z2. Thanks!
TEKHD said:
LOLLIPOP SD Card Write Fix (Atomatic Method)
Flashable ZIP Via Recovery (TWRP): (Flash by turning on phone with Power + Volume UP + Home Button)
Download:
http://tek.serveftp.net/xda/tmo_n900t_extsd_fix_tekhd.zip
Now all apps will be able to write to external SD Card...
>>> This works with LolliPop stock rom... Tested already with Root Explorer, Titanium Backup, Opera, Dolphin Browser, Ttorrent... all able to perfectly write directly to external sd card. Test by copying any file to external sd card using Root Explorer.
Click to expand...
Click to collapse
I have a note4 910c with Stock Rom Lollipop will it works fine without any Problem ?? download link is dead kindly post new link thank you
annus9214 said:
I have a note4 910c with Stock Rom Lollipop will it works fine without any Problem ?? download link is dead kindly post new link thank you
Click to expand...
Click to collapse
This was answered 5 posts above yours. Use the search on the right next time...
Thank You

Request for Help - Odin Stuck returning to Stock

Hi I am attempting to return my SGH-i927 to stock UCLJ3 downloaded from www.sammobile.com
Phone looks like this
+--------------------------------------------------+
| |
| ODIN3 download Mode |
| (Protocol v2.1) |
+--------------------------------------------------+
Reason: Force Key
Secure Mode: Secure
Check signature: Check
Custom Binary Download: Yes (2 counts)
Current Binary: Samsung Official
Waiting USB Cable...
==> Connected Press the [Start] of Odin3!!
Andy Pic
Downloading...
Do not turn off target!!
{Blue Progress Bar to about 50%}
Connected via Odin and it fails flashing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your help and guidance on how I go about recovering my phone and install the stock firmware would be gratefully received
Kind Regards
UPDATE - I Successfully recovered my Phone to a working state by using TWRP and restoring a backup.
I would still like to revert the phone to UCLJ3 stock from
CyanogenMod Version 11-20140725-UNOFFICIAL-i927
Here is a stock version you can download:
requiem_mortis said:
Hi I am attempting to return my SGH-i927 to stock UCLJ3 downloaded from
UPDATE - I Successfully recovered my Phone to a working state by using TWRP and restoring a backup.
I would still like to revert the phone to UCLJ3 stock from
CyanogenMod Version 11-20140725-UNOFFICIAL-i927
Click to expand...
Click to collapse
Have you tried the Development form? This thread has a stock version you can download also, as well as the rooted, deodexed, zipaligned version:
[ROM] Stock UCLJ3 Rooted, Deodexed, Zipaligned( 2 Versions)
(Sorry, I am too new to post links, so you will just have to go to the development form, page 1, about half way down, above is the name of the thread.)
Thank you for taking the time to reply. Iam aware of the links in the Dev thread, but wanted to return the phone to an unrooted stock firmware so that Barclay's banking apps work and there are no VoIP issues for things like Skype and what's app. I want to pass the phone on to my son.
http://forum.xda-developers.com/showthread.php?t=1994902
The first link is for the pure stock UCLJ3 Rom. The Dev-Host website will redirect you to an advertisement if you are not a member when you click download. So if you go to the site, become a free member, and download the file. I downloaded it just now to ensure that it still works.
Be sure to slap dman3285 's thanks button!
Thank you once again
The Link to which your refer describes the firmware as....
"Here is the Stock UCLJ3 Firmware for ICS
It is:
Rooted
Deodexed
Zipaligned
Batch Optimized
NOT debloated"
Using 'rooted' firmware does not allow the use of Barclays banking app's.
Kind Regards
Phill Beckman
Give sediROM a try!
While installing sediROM you can decide if you want to have it rooted or not!!
Would be nice to know if that fixes your problem.
-----
Sent from my SGH-I927 using XDA Android mobile app
xdajog said:
Give sediROM a try!
While installing sediROM you can decide if you want to have it rooted or not!!
Would be nice to know if that fixes your problem.
-----
Sent from my SGH-I927 using XDA Android mobile app
Click to expand...
Click to collapse
Thankyou for your response.
I installed sediROM - using TWRP without issue - (chose un-rooted option) - Skype and WhatsApp voice call work correctly and my son is busy customising his 'new' phone -
I note that Bluetooth file transfer does not work but this appears to be a known issue - I'm trusting that the headset profiles work as this was a stated aim for this ROM fork, and his pending birthday present is to be a set of Bluetooth headphones.
requiem_mortis said:
Thankyou for your response.
I installed sediROM - using TWRP without issue - (chose un-rooted option) - Skype and WhatsApp voice call work correctly and my son is busy customising his 'new' phone -
I note that Bluetooth file transfer does not work but this appears to be a known issue - I'm trusting that the headset profiles work as this was a stated aim for this ROM fork, and his pending birthday present is to be a set of Bluetooth headphones.
Click to expand...
Click to collapse
really glad to hear that. Do not hesitate to click thanks here and in the sediROM posts
That keeps me motivated
yes bluetooth file transfer is an issue but I thought it is for the latest beta only (v2.0)? You use v1.7 right?
You're totally right the reason for sediROM was to be able to use bluetooth headset profiles
plus fixing a bug in ICS which removes all existing bluetooth pairings after a reboot. Both (and many more) fine in sediROM
All the best
xdajog
Yes using 1.7 able to pair with my oneplus one but BT transfers fail.
requiem_mortis said:
Yes using 1.7 able to pair with my oneplus one but BT transfers fail.
Click to expand...
Click to collapse
Thanks for your reply! That helps me finding the root cause.
all the best
xdajog
.
xdajog said:
Thanks for your reply! That helps me finding the root cause.
all the best
xdajog
.
Click to expand...
Click to collapse
Tried again was able to transfer files via BT from cap to oneplus but not the other way round. Just got a file not sent on the oneplus and nothing on the cap
requiem_mortis said:
Tried again was able to transfer files via BT from cap to oneplus but not the other way round. Just got a file not sent on the oneplus and nothing on the cap
Click to expand...
Click to collapse
Thanks dude. I already find the cause for that problem and a first fix was successful. I will implement the fix in the ROM build and if all went well I can release v2 finally.
Sent from my SGH-I927 using XDA Free mobile app
Hello to everyone! I would like to mention that I can't return to roger's stock as well (2.3.5). I have cm11 and I try to flash via odin3 v3.04 the I927RUXKJ5_I927RUXKJ5_I927RRWCKJ5_HOME.tar.md5. Odin process seems to be successfull, but when the phone reboots, is freezes at roger's welcome screen . I 've tried different stock roms and ways but nothing.. I try to flash these roms via TWRP (not odin) but nothing again . When I flash any custom rom there is no problem at all. It seems strange to me that everyone can gurrantee a successfull custom rom upgrade and if someone wants to downgrade to original rom, there are a lot issues. Please, I would like to install my original rogers 2.3.5 rom. If someone could give me a successfull tutorial, i would appreciate that. Thanks in advance.

Categories

Resources