How do I overclock my Xperia S GPU?
Im running a kernel that supports that, but is it overclocked or should I do something first?
You can't oc the GPU yourself..like you use setcpu for CPU..its already over clocked in xyz kernel..
Sent from PAC Xperia S
Related
Hello there forum.
I have been wondering if someone can help me find a custom ROM for my [GSM] Galaxy nexus that can support both 13500ghz CPU overclocking as well as games such as Modern combat 3 and GTA3. This actually will help me increase the graphics performance and keep my nexus in the right temperature. I have tested Foxhound ROM but it appeared that it doesn't support games.
It is my first thread and I hope everyone will benefit from it . thanks
You're looking for a kernel not a ROM. A ROM doesn't control CPU overclocking.
AOKP + Franco Kernel will do you well though. As Franco Kernel requires 4.0.3.
zephiK said:
You're looking for a kernel not a ROM. A ROM doesn't control CPU overclocking.
AOKP + Franco Kernel will do you well though. As Franco Kernel requires 4.0.3.
Click to expand...
Click to collapse
Hmmm is thats so, thanks for the information. I haven't tried to install a Kernel before but ill check how.
thanks again for the fast reply.
zephiK said:
You're looking for a kernel not a ROM. A ROM doesn't control CPU overclocking.
AOKP + Franco Kernel will do you well though. As Franco Kernel requires 4.0.3.
Click to expand...
Click to collapse
Is that what am looking for? http://forum.xda-developers.com/showthread.php?t=1367341
flavoristic said:
Hmmm is thats so, thanks for the information. I haven't tried to install a Kernel before but ill check how.
thanks again for the fast reply.
Click to expand...
Click to collapse
Kernel is responsible for overclocking your CPU, undervolting, etc.
This kernel will ALSO OC your GPU to 384 MHz from 308 MHz (or so) so it should help a lot.
zephiK said:
Kernel is responsible for overclocking your CPU, undervolting, etc.
This kernel will ALSO OC your GPU to 384 MHz from 308 MHz (or so) so it should help a lot.
Click to expand...
Click to collapse
Great,, so now the only 4.0.3 I have is the Foxhound ROM. Should i flash into it and then try and install the Kernal from there?
flavoristic said:
Great,, so now the only 4.0.3 I have is the Foxhound ROM. Should i flash into it and then try and install the Kernal from there?
Click to expand...
Click to collapse
Just flash it after flashing a ROM. If Foxhound is 4.0.3 then you can try it with that, I personally prefer AOKP but like I said before if Foxhound is 4.0.3 then go for it unless you want to try AOKP.
Good, i will work on it right now. ill hit you when works.
flavoristic said:
Good, i will work on it right now. ill hit you when works.
Click to expand...
Click to collapse
Okay. Sounds good.
unfortunately it did not fix my problem. i am still stuck in Modern combat 3 intro loop. what should i do?
Android version: 4.0.3
Kernel version: 3.0.16- franco-Kernel-pro-de-franco
flavoristic said:
unfortunately it did not fix my problem. i am still stuck in Modern combat 3 intro loop. what should i do?
Android version: 4.0.3
Kernel version: 3.0.16- franco-Kernel-pro-de-franco
Click to expand...
Click to collapse
Me too.. anyone can help us..
ROM: AOKP Build 28
Kernel: Nightly Franco r112
You might try Morphics Trinity kernel.
http://www.derkernel.com/ics-tuna-exp.html
Try this one, it has an over-clocked GPU as well
TNP138-RD-FUV
This is the Trinity NP kernel with 1382MHz CPU And 512 GPU clock
It might help you out.
Sent from my Verizon 4G LTE Galaxy Nexus.
Try GLaDOS by ezekeel. it has GPU overclock till 500 mhz and CPU overclock till 1.6 ghz
For changing live overclock and other tweaks get nstools from market or buy glados control.
Gesendet von meinem Galaxy Nexus mit Tapatalk
blockbusta said:
Try GLaDOS by ezekeel. it has GPU overclock till 500 mhz and CPU overclock till 1.6 ghz
For changing live overclock and other tweaks get nstools from market or buy glados control.
Gesendet von meinem Galaxy Nexus mit Tapatalk
Click to expand...
Click to collapse
Just be aware that some devices cannot handle over-clocking past 1.3. The phone will crash and reboot. If you try a kernel with over-clock to 1.6 be sure that you DO NOT check "set on boot". That way if your phone crashes and reboots, it will boot up OK.
In the link above for Trinity kernel there is a 1.6 CPU w/ 512 GPU. If you want to try it.
I have also read that even the devices that can handle the 1.6 without crashing, don't actually run at 1.6 due to thermal throttle. When the CPU reaches 1.6 it over heats and will thermal throttle down within seconds.
Let us know how it turns out.
Sent from my Verizon 4G LTE Galaxy Nexus.
What are the best CPU Speeds for the Play? and why?
Elaborate. You don't say what you're using it for. For normal use? 245MHz to 1GHz works great for me (stock speed)
For gaming 700Mhz to 1400Mhz max.
Sent from my R800i using xda app-developers app
I'm currently using 245 MHz - 1.5 GHz with SmartAssV2. Great performance and battery life. =)
245 mhz min and 1.3ghz max SmartassV2
Good for games and daily use.
OndemandX?? SmartassV2's better for all of that.
Regards,
Sdojoin
Use'em THANKS Button
100mhz with screen off, 300mhz when on the launcher, 750mhz when playing emulators, and 1.2ghz for psx emulator.
Sprint Samsung Galaxy S II Epic 4G Touch w/ Stock 4.0.4
Xperia Play R800X w/ supercharged stock 2.3.3 and doomkernel
I'm testing Superbad governor right now and I'm liking it, but it's a kind of Smartass v2.
I think the best maximum frecuency is 1.2GHz because gives a 20% boost with mild battery drain, but with some undervolting you can go up to 1.4GHz or 1.5GHz because undervolting relieves the extra power consume.
but still i dont understand what is governor function ? what is the difference between all those governor ? what each of the governor do . for example what is the difference between smartassv2 and ondemand .
@kuro... To better understand the govs I suggest taking a look @ wedgess kernel posts. He basically has them broken down & describes what each one does or how they work.
Sent from my R800x using xda app-developers app
I was wondering if the kernel already overclocks the GPU or It just supports GPU OC?
if it just supports how do I do it? Thank you.
Is there any way to overclock the GPU of XPERIA S>?
DoomKernel works in GB only!
Please help me someone!
if possible can i do it on cm10 as well?
nope.
As i know, it is. but im not sure, because its like 1-50 Mhz overklock only! too much and ull burn it!
no , no overclokcing it on stock rom.
Give it a try if you wanna risk and frills your phone...only do a overclock using custom kernel ONLY...it have been set to control such a high overclock
Sent from my LT28h using xda premium
How
Pruikki said:
As i know, it is. but im not sure, because its like 1-50 Mhz overklock only! too much and ull burn it!
no , no overclokcing it on stock rom.
Click to expand...
Click to collapse
But how do we do it?
Nova kernel does it
Sent from my Jellybean Xperia S
I am using kernel provided with freeXperia cm10. Is there any kernel with overclocking support for Xperia S cm10?
bluechelsea said:
I am using kernel provided with freeXperia cm10. Is there any kernel with overclocking support for Xperia S cm10?
Click to expand...
Click to collapse
Just use SetCPU.
Settings>Performance>Processor>Maximum CPU frequency. Here you can set 1674MHz maximum (this is the XSL's max freq.). For higher frequency, you need to flash another kernel wich compatible with the CM 10, and support the overclock.
Szatyor said:
Settings>Performance>Processor>Maximum CPU frequency. Here you can set 1674MHz maximum (this is the XSL's max freq.). For higher frequency, you need to flash another kernel wich compatible with the CM 10, and support the overclock.
Click to expand...
Click to collapse
Can u name any kernel that supports overclock in cm10?
Maybe the Nova kernel, but it's outdated. Why do you want to OC? In my SL everything smooth, and fast.
Szatyor said:
Maybe the Nova kernel, but it's outdated. Why do you want to OC? In my SL everything smooth, and fast.
Click to expand...
Click to collapse
Satisfaction of seeing higher benchmark.
bluechelsea said:
Satisfaction of seeing higher benchmark.
Click to expand...
Click to collapse
If you would like to see higher benchmark scores, the CM is not your way, because the CM ROMs are weakly in benchmarks, but strongs in real performance. If you hunting just for the higher score, try out the Trinity kernel, and the Trinity ROM.
Anyways, I had slimbean 4.2 before and even that didn't have an overclocking kernel.