Develop Bugs

cannot use any PC36IMG.zip files.

it keeps saying main version is older update fail. i have tried toast's zips and other threads with this same problem and nothing help. thnx in advance.

You've most likely updated to 1.47? Rooting 1.47 is not possible for now... Check this thread.

If you have a recovery flashed still nandroid a backup with super user. Then goto toasts part two and unlock the nand again.just make sure you use the right pc36img. Its not the same as the 1st on you root with.

i had rooted my phone with nand access before but since i accidentally removed the battery while it was updating the pc36img now i am stuck in the bootscreen black and white and cannot flash any pc36img zips

If your stuck at the evo boot screen you might be screwed . Might be time to try and return it.

stoney05 said:
If your stuck at the evo boot screen you might be screwed . Might be time to try and return it.
Click to expand...
Click to collapse
got any tips?

i would just wait till 2morrow for an answer b4 i water damadge the crap out of the phone

can you boot into recovery? if so, which recovery to do have installed?

Vinny75 said:
can you boot into recovery? if so, which recovery to do have installed?
Click to expand...
Click to collapse
i cannot go into recovery it stays on the evo black and white screen. i am not sure which recovery i have

Tornadobarrage said:
i cannot go into recovery it stays on the evo black and white screen. i am not sure which recovery i have
Click to expand...
Click to collapse
ok, so holding down the volume down button while turning on the power doesn't get you to the boot menu?

Vinny75 said:
ok, so holding down the volume down button while turning on the power doesn't get you to the boot menu?
Click to expand...
Click to collapse
boot menu yes recovery no.when i go to recovery it stay in the evo screen

Tornadobarrage said:
boot menu yes recovery no.when i go to recovery it stay in the evo screen
Click to expand...
Click to collapse
can you go into fastboot? from there you could flast a new recovery... assuming you have the eng boot..
see: http://forum.xda-developers.com/showthread.php?t=705026 the first post has the instructions

Vinny75 said:
can you go into fastboot? from there you could flast a new recovery... assuming you have the eng boot..
see: http://forum.xda-developers.com/showthread.php?t=705026 the first post has the instructions
Click to expand...
Click to collapse
i am trying to do this
Copy recovery-RA-evo-v1.7.0.1.img to a location where fastboot can find it.
Boot your phone into fastboot mode
fastboot devices(press enter) (to make sure that fastboot "sees" your phone)
fastboot flash recovery recovery-RA-evo-v1.7.0.1.img(press enter)
where do i put the file so fastboot can find it?

Tornadobarrage said:
i am trying to do this
Copy recovery-RA-evo-v1.7.0.1.img to a location where fastboot can find it.
Boot your phone into fastboot mode
fastboot devices(press enter) (to make sure that fastboot "sees" your phone)
fastboot flash recovery recovery-RA-evo-v1.7.0.1.img(press enter)
where do i put the file so fastboot can find it?
Click to expand...
Click to collapse
same directory on computer as fastboot.exe (I think I got fastboot from here http://developer.htc.com/google-io-device.html)

im not sure if i know how to use it

Vinny75 said:
same directory on computer as fastboot.exe (I think I got fastboot from here http://developer.htc.com/google-io-device.html)
Click to expand...
Click to collapse
i already have fastboot in sdk tools every time i try to run fastboot with the recovery there it just closes quickly

Don't double click it.open a cmd prompt and run the commands there
Sent from my PC36100 using XDA App

Vinny75 said:
Don't double click it.open a cmd prompt and run the commands there
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
i have done that and this pops out
c:\android-sdk\tools>fastboot
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
reboot reboot device normally
reboot-bootloader reboot device into bootloader
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default:
2048
c:\android-sdk\tools>
what should i type?

Tornadobarrage said:
i am trying to do this
Copy recovery-RA-evo-v1.7.0.1.img to a location where fastboot can find it.
Boot your phone into fastboot mode
fastboot devices(press enter) (to make sure that fastboot "sees" your phone)
fastboot flash recovery recovery-RA-evo-v1.7.0.1.img(press enter)
Click to expand...
Click to collapse
This.make sure the recovery is in the same folder as fast boot
Sent from my PC36100 using XDA App

Vinny75 said:
This.make sure the recovery is in the same folder as fast boot
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
c:\android-sdk\tools>fastboot flash recovery recovery-RA-evo-v1.7.0.1.img
sending 'recovery' (5032 KB)... OKAY [ 1.595s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.477s
c:\android-sdk\tools>
it failed what should i do now?

[Q] how to return my one X to original roms?

Good evening!
I'm new to this so ill try to be as specific as I can. about a month ago I've bought the One x from a private store here in Israel and i think it was from taiwan or something. anyways, a couple of days ago i started messing with it, rooting it and everything.
I unlocked the bootloader via the htcdev.com, did the whole CMD thing and everything and flashed the android revolution HD rom (thats the name?)
so it was great and everything but it wasnt as complete as the rom my phone came with (I guess its the stock rom) so i tried the RD MIUI rom and it was fine, but still not what i was looking for and so i realized i need to come back to the stock rom, simple and clean.
now after the whole unlocking and rooting and everything, how the hell do i get my stock rom back? i want to lock back my phone, unroot it and put the old rom back on it and im very new to this whole HTC rooting thing, since i was using the galaxy s 1 and 2 before the HTC.
I searched the forum and couldnt find a guide, every post here is just links but no TUT's, as if everyone already knows everything!
anyways, I would really appreciate anybody helping me!
my phone is the international version i guess, bought in israel shipped from some asian country but is unlocked to all carriers and everything, not an AT&T version or anything.

First thing, make sure what is your original software version.
If you're not sure, run this in fastboot mode
go to bootloader
type fastboot getvar version-main
tell us what no. it show
then will be the next step to get the correct RUU for your device

ckpv5 said:
First thing, make sure what is your original software version.
If you're not sure, run this in fastboot mode
go to bootloader
type fastboot getvar version-main
tell us what no. it show
then will be the next step to get the correct RUU for your device
Click to expand...
Click to collapse
version-main: 1.29.707.11
finished. total time: 0.006s
thats the thing it showed me.

That's great.
Here is your RUU : http://hoxroms.serveftp.com/RUU_END...Radio_1.1204.105.14_release_260743_signed.exe
How to : go to bootloader / fastboot mode
(even though some people may not agree with this, but this will bring no harm and it is noob-proof) do this:
1- flash a stock recovery.img
fastboot flash recovery recovery_signed.img
fastboot reboot-bootloader
fastboot erase cache
2- flash a stock boot.img
fastboot flash boot boot_signed.img
fastboot reboot-bootloader
fastboot erase cache
3- re-lock bootloader
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
4- run/doubleclick RUU and follow instructions.
Grab the stock boot.img & recovery from : http://forum.xda-developers.com/showpost.php?p=27261622&postcount=1149

ckpv5 said:
First thing, make sure what is your original software version.
If you're not sure, run this in fastboot mode
go to bootloader
type fastboot getvar version-main
tell us what no. it show
then will be the next step to get the correct RUU for your device
Click to expand...
Click to collapse
Can this be done with terminal emulator also?
If so how?
Sent from my HTC One X using CoreDroid Premium

Doo Doo said:
Can this be done with terminal emulator also?
If so how?
Sent from my HTC One X using CoreDroid Premium
Click to expand...
Click to collapse
If you are talking about the Terminal Emulator app, I don't think it can read the version-main as the getprop command will read what is written in the build.prop
But I maybe wrong as I'm not really familiar with Terminal Emulator except some basic command.

So how do we flash this whole thing?

GUARDIANBD said:
So how do we flash this whole thing?
Click to expand...
Click to collapse
Reboot to bootloader / fastboot mode where you see the word fastboot usb highlighted in red.
And the above files only for 1.29.707.11 software version, it won't work for others.

Doo Doo said:
Can this be done with terminal emulator also?
If so how?
Sent from my HTC One X using CoreDroid Premium
Click to expand...
Click to collapse
ckpv5 said:
That's great.
Here is your RUU : http://hoxroms.serveftp.com/RUU_END...Radio_1.1204.105.14_release_260743_signed.exe
How to : go to bootloader / fastboot mode
(even though some people may not agree with this, but this will bring no harm and it is noob-proof) do this:
1- flash a stock recovery.img
fastboot flash recovery recovery_signed.img
fastboot reboot-bootloader
fastboot erase cache
2- flash a stock boot.img
fastboot flash boot boot_signed.img
fastboot reboot-bootloader
fastboot erase cache
3- re-lock bootloader
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
4- run/doubleclick RUU and follow instructions.
Grab the stock boot.img & recovery from : http://forum.xda-developers.com/showpost.php?p=27261622&postcount=1149
Click to expand...
Click to collapse
This should be stickied in this section as it is smack bang on the number.. AWESOME WORK

try'd to use the "fastboot getvar version-main" in linux terminal
i see FASTBOOT USB but i cannot get the info that u need..
so would this help?
Code:
*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-0.96.0000
CPLD-None
MICROP-None
RADIO-1.1204.105.14
eMMC-bootmode : disabled
CPU-bootmode : disabled
MODEM PATH : OFF
May 10 2012,01:32:07

Not so sure about linux, but maybe the command is:
$ ./fastboot getvar version-main

ckpv5 said:
Not so sure about linux, but maybe the command is:
$ ./fastboot getvar version-main
Click to expand...
Click to collapse
just to get this straight :
to find this info what i need to do? i'v got dualboot WIN7 & Linux,at the Win drivers are installed + HTC SYNC
is there anything else i need to do ?
im in the HBOOT the 1X is connected and it says "FASTBOOT USB"
try'd to type in the cmd "fastboot getvar version-main" and nothing is happend
where this syntax is needed to put? via CMD or ADB?

Do you still have the fastboot folder/files that you downloaded when you unlock your
device ?
In Windows, open cmd prompt, cd to the fastboot folder where you have the fastboot.exe
example:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd\
C:\>cd fastboot
C:\fastboot>fastboot getvar version-main
version-main: 1.29.707.11
finished. total time: 0.044s
C:\fastboot>
Attached here the fastboot files & adb files in case anyone need them

ckpv5 said:
Do you still have the fastboot folder/files that you downloaded when you unlock your
device ?
In Windows, open cmd prompt, cd to the fastboot folder where you have the fastboot.exe
example:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd\
C:\>cd fastboot
C:\fastboot>fastboot getvar version-main
version-main: 1.29.707.11
finished. total time: 0.044s
C:\fastboot>
Attached here the fastboot files & adb files in case anyone need them
Click to expand...
Click to collapse
done
Code:
c:\fastboot>fastboot getvar version-main
version-main: 1.29.720.11
finished. total time: -0.000s
now i have CWM recovery
how can i revert back to stock from there?

ckpv5 said:
That's great.
Here is your RUU : http://hoxroms.serveftp.com/RUU_END...Radio_1.1204.105.14_release_260743_signed.exe
How to : go to bootloader / fastboot mode
(even though some people may not agree with this, but this will bring no harm and it is noob-proof) do this:
1- flash a stock recovery.img
fastboot flash recovery recovery_signed.img
fastboot reboot-bootloader
fastboot erase cache
2- flash a stock boot.img
fastboot flash boot boot_signed.img
fastboot reboot-bootloader
fastboot erase cache
3- re-lock bootloader
fastboot oem lock
fastboot reboot-bootloader
fastboot erase cache
4- run/doubleclick RUU and follow instructions.
Grab the stock boot.img & recovery from : http://forum.xda-developers.com/showpost.php?p=27261622&postcount=1149
Click to expand...
Click to collapse
This is just great, ill do this and post the result!
after I finish these steps, my phone will be just like it was when i first bought it? and will I be able to update it with original HTC updates and maybe the new JB when it comes out?
THANKS ALOT!!!!!!!

Also waiting ^_^

GUARDIANBD said:
Also waiting ^_^
Click to expand...
Click to collapse
ckpv5 said:
Do you still have the fastboot folder/files that you downloaded when you unlock your
device ?
In Windows, open cmd prompt, cd to the fastboot folder where you have the fastboot.exe
example:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd\
C:\>cd fastboot
C:\fastboot>fastboot getvar version-main
version-main: 1.29.707.11
finished. total time: 0.044s
C:\fastboot>
Attached here the fastboot files & adb files in case anyone need them
Click to expand...
Click to collapse
i flashed the recovery, flashed boot img and relocked, cleared all caches and everything but now when the phone powers up (i currently have the miui on it) it shows me the lock screen, freezes for a second and phone restarts over and over again, i cant use the rom update utility when the phone is in this weird loop... and idea? (((

ChuckTesta said:
i flashed the recovery, flashed boot img and relocked, cleared all caches and everything but now when the phone powers up (i currently have the miui on it) it shows me the lock screen, freezes for a second and phone restarts over and over again, i cant use the rom update utility when the phone is in this weird loop... and idea? (((
Click to expand...
Click to collapse
If you follow the step carefully, there is no phone power up needed. You need to run the RUU in fastboot, directly after step 3.
Put your device in bootloader mode. Press power and hold it, you wll see the three buttons blinks and the device will shutdown. Release the power button, hold the volume button, the device will boot to bootloader/fastboot mode. Connect to your PC and run RUU.
---------- Post added at 08:02 PM ---------- Previous post was at 07:59 PM ----------
GUARDIANBD said:
done
Code:
c:\fastboot>fastboot getvar version-main
version-main: 1.29.720.11
finished. total time: -0.000s
now i have CWM recovery
how can i revert back to stock from there?
Click to expand...
Click to collapse
There is no 1.29.720.11 RUU available at the moment. Unless you have a nandroid backup of your stock ROM and you have the OTA files with you, there is no way to return to Stock for 1.29.720.11 currently.

ckpv5 said:
If you follow the step carefully, there is no phone power up needed. You need to run the RUU in fastboot, directly after step 3.
Put your device in bootloader mode. Press power and hold it, you wll see the three buttons blinks and the device will shutdown. Release the power button, hold the volume button, the device will boot to bootloader/fastboot mode. Connect to your PC and run RUU.
---------- Post added at 08:02 PM ---------- Previous post was at 07:59 PM ----------
There is no 1.29.720.11 RUU available at the moment. Unless you have a nandroid backup of your stock ROM and you have the OTA files with you, there is no way to return to Stock for 1.29.720.11 currently.
Click to expand...
Click to collapse
Oh my bad, The RUU said to turn on the phone and connect it so I thought is should be on, will do it in a bit and post results.
Thanks alot ckpv5!!!!

ChuckTesta said:
Oh my bad, The RUU said to turn on the phone and connect it so I thought is should be on, will do it in a bit and post results.
Thanks alot ckpv5!!!!
Click to expand...
Click to collapse
Ya.. I know, HTC's instructions always misleading, like when to unlock bootloader, it says to remove the battery...

[Q] TWRP recovery Stuck at Booting recov image

Hi, it's the second time i try to install TWRP recovery v2.2.0+ and each time it keeps getting stuck at the boot with the message
Bootloader version 0.03.06-ics unlock mode
Booting recovery kernel image.
Waited for more than 10 minutes and nothing happened.
i can reboot and and log into ics normally i just don't have access to a recovery.
---I want to know how to properly install twrp , what went wrong and how to fix it.:
the script:
@echo off
cls
echo reboot to bootloader
adb wait-for-device
adb shell su -c "mount -o remount, rw /system/ && mv /etc/install-recovery.sh /etc/install-recovery.offsh;"
adb reboot-bootloader
echo flashing recovery
fastboot flash recovery recovery-A100ICS-TWRP-2.2.0.img
echo -
echo -
fastboot reboot
adb wait-for-device
echo check the recovery XXXXXXXXXXXXXXXX--This is where i'm stuck at.
adb reboot recovery
MY SETUP:
ROM FLEX-A100-REAPER-RELIX_Rev2 , OC A 1500, CWM was working ok.
WIN64

I would suggest downloading the image again, then trying the install script after you delete the current image with the newly downloaded image.
If you feel OK using a terminal its pretty straight forward
Open a terminal and CD to the folder with adb fast boot and recovery image
Example
cd c:\recovery
If powered on type
adb reboot bootloader
After it boots into download protocol type
fastboot erase recovery
fastboot flash recovery twrp.img
Twrp.IMG being whatever the file name is.
fastboot reboot
Let it boot into android then
adb reboot recovery
See what it does.
Tapatalked from my Galaxy S II.

a100/openrecovery-twrp-2.2.2.1-a100.img
renamed to recovery.img and flashed properly.
Same problem. Can it be related to the bootloader number ?

IamModeste said:
a100/openrecovery-twrp-2.2.2.1-a100.img
renamed to recovery.img and flashed properly.
Same problem. Can it be related to the bootloader number ?
Click to expand...
Click to collapse
That's the only boot loader we can flash on so that's fine. Did you download the image again?
Tapatalked from my Galaxy S II.

pio_masaki said:
Did you download the image again?
Click to expand...
Click to collapse
yes i did , donloaded openrecovery-twrp-2.2.2.1-a100.img,
renamed to recovery.img and flashed without any problem.

I redownloaded and flashed it again,
To no avail...
Nothing else to suggest ? I'd like to use a touch enabled recovery.
Sent from the usual suspects.

IamModeste said:
I redownloaded and flashed it again,
To no avail...
Nothing else to suggest ? I'd like to use a touch enabled recovery.
Sent from the usual suspects.
Click to expand...
Click to collapse
Did you erase recovery before flashing?

Theonew said:
Did you erase recovery before flashing?
Click to expand...
Click to collapse
Agreed.
I would try again make sure to: 'fastboot erase recovery', then 'fastboot flash recovery recoveryname.img' (make sure it's recovery [space] then the img name).
You can also try Zeronull's 2.1.1/2.2.0 and Linuxsociety's 2.2.2.0. It could be a bad upload of the 2.2.2.1 img

Answer
There's a file in /system/etc/ called install_recovery.sh that may need to be deleted for the custom recovery to stick. You need root to remove it.
sounds like you may need to start fresh.
Use fastboot to erase the system, boot, recovery and cache, perform a fastboot -w and then install the new recovery and ROM. Erasing the system will kill that recovery file from above.
Let me know. There are a couple of other options that I can think of.
---------- Post added at 06:48 AM ---------- Previous post was at 06:32 AM ----------
Here is what it should look like in fastboot on the command prompt yours will be different of course because mine is setup differently. But basically load up fastboot on windows or whatever you use and first erase the recovery then run fastboot -w and then flash the twrp recovery image and finally fastboot reboot. After reboot hold down volume button and enter recovery as usual. Should work then. My explanation is above. It's the install_recovery.sh file fastboot -w takes care of it! Sorry for bumping and old thread. But it doesn't look like it ever got solved.
Code:
C:\>C:/android/fastboot.exe erase recovery
erasing 'recovery'... OKAY [ 0.733s]
finished. total time: 0.734s
C:\>C:/android/fastboot.exe -w
erasing 'userdata'... OKAY [ 5.480s]
erasing 'cache'... OKAY [ 2.052s]
finished. total time: 7.533s
C:\>C:/android/fastboot.exe flash recovery C:/recoverytwrp.img
sending 'recovery' (4410 KB)... OKAY [ 0.491s]
writing 'recovery'... OKAY [ 0.255s]
finished. total time: 0.746s
C:\>C:/android/fastboot.exe reboot
rebooting...
finished. total time: 0.001s

[Q] Is CWM Recovery supported on HOX JB 4.1.1 ?

Hi All,
I can't get any version of CWM Recovery working on updated HOX
I'm not flashing it, just doing "fastboot boot imgname" ( this worked for me well before ), and phone hangs with white htc boot screen
I'd like to do backup before i try new Android Revolution HD
After i reset it ( pwr+voldown ), phone boots correctly and works fine, it's just recovery that is not working.
cid HTC_032, hboot 1.36
Any idea ? Am I the only one having this problem ?
Best Regards.
Edit:
fastboot shows this:
downloading 'boot.img'... OKAY
booting... OKAY
it seems like image is being correctly uploaded to memory but not executed

Flash recovery:
fastboot flash recovery imgname
Sent from my HTC One X using xda app-developers app

hahhahhaaa said:
Flash recovery:
fastboot flash recovery imgname
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Yes, but i don't want to flash it. i want to boot into cwm recovery without flashing it. This was possible before ota today.
Code:
C:\aaa>fastboot.exe
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
[U][B] boot <kernel> [ <ramdisk> ] download and boot kernel[/B][/U]
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
reboot reboot device normally
reboot-bootloader reboot device into bootloader
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id

You want to enter the stock or custom recovery ?
Do this
Fastboot erase cache
Helped many people not being able to enter the recovery
And if you want to flash a boot.img its not
Fastboot boot boot.img
But
Fastboot flash boot.img
With fastboot boot boot.img you run the phone once with that specific kernel and with a reboot its undone ! It's more used for test purposes
Your edited tekst in the op says clearly
Downloading boot.img and not recovery.img
Was your command right ?
And btw what's wrong with running the custom recovery and enter from the bootloader or directly from the os . I have a 4-way reboot (also the option to boot into recovery)

Erasing cache didn't help
What's wrong with flashing custom recovery, is that i always try read-only methods before i alter something, even if its useless but working
And I'm genuinely afraid of flashing something that seems to not work
Anyway, this is output from cmd:
Code:
C:\Users\gstawik\Desktop\Android\Flash_boot_17.x_0.1\fastboot>fastboot-windows.e
xe boot ..\..\recovery-clockwork-5.8.4.0-endeavoru.img
downloading 'boot.img'... OKAY
booting... OKAY
C:\Users\gstawik\Desktop\Android\Flash_boot_17.x_0.1\fastboot>
And it DID work many times before the HTC JellyBean OTA update.
Also, i get it, "fastboot flash recovery imgname" to flash, "fastboot boot imgname" to boot directly, now I'm sad, because i feel like my English sucks :crying:
EDIT:
Other fastboot binary versions, including newest one from SDK, do not solve this problem.

Well then i'm a bit in the dark now,.never "played" with these commands. I just flash the damn thing and enter it

I damn did flash this thing and it's working, damn thanks for help anyway
Sent from my HTC One X using xda app-developers app

staviq said:
I damn did flash this thing and it's working, damn thanks for help anyway
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
:thumbup:

My HOX just briked

Hi guys. I just used the power bottom -> restart -> recovery command on my HoX running last Viper ROM. After the reboot, my phone just bricked. I can get the device to bootloader, but I cant either open backup or reboot and run the the ROM itself. Any suggestions? Kinda shocked atm... All i can do is to hold power for +5 for a restart and get to bootloader, nothing else works. Also, tried hasoon2000's exe file to reistall TWRP, didnt work.

Ali_Hako said:
Hi guys. I just used the power bottom -> restart -> recovery command on my HoX running last Viper ROM. After the reboot, my phone just bricked. I can get the device to bootloader, but I cant either open backup or reboot and run the the ROM itself. Any suggestions? Kinda shocked atm... All i can do is to hold power for +5 for a restart and get to bootloader, nothing else works. Also, tried hasoon2000's exe file to reistall TWRP, didnt work.
Click to expand...
Click to collapse
you can use the fastboot commands to save your ass try
Code:
fastboot erase cache

matt95 said:
you can use the fastboot commands to save your ass try
Code:
fastboot erase cache
Click to expand...
Click to collapse
Tnx for the superbfast answer
it dosent work :
matt95 said:
you can use the fastboot commands to save your ass try
Code:
fastboot erase cache
Click to expand...
Click to collapse
Tnx for the superbfast answer
Edit, sry my bad, I used a wrong command first time,
Its still bricked :s
erasing 'cache'...
OKAY [ 0.078s]
finished. total time: 0.078s

Download these drivers
http://db.tt/gXVxa3Dp and install them
Download these files
http://db.tt/ldx3qOOU and place them in a folder on the pc looking like this
C:\fastboot\*the files from the download*
Connect the phone to the pc and put the phone in the bootloader and select fastboot (you should see in red FASTBOOT USB)
Then you right click inside that fastboot folder and open a command prompt, and on that prompt you type just like Matt said
Fastboot erase cache
Now try to enter the recovery :thumbup:

OH GOD IT WORKED!
but still, I get unexpected crashes even in the recovery, my phone just crashed in the middle of recovery while i was trying to wipe the ROM. And its bricked again
Edit: It crashes right after I want to wipe Dalvik Cache
ATM Im trying to restore my first nandriod back up which was taken right after i unlocked the bootloader

Ali_Hako said:
Tnx for the superbfast answer
it dosent work :
Tnx for the superbfast answer
Edit, sry my bad, I used a wrong command first time,
Its still bricked :s
erasing 'cache'...
OKAY [ 0.078s]
finished. total time: 0.078s
Click to expand...
Click to collapse
download the latest CMW recovery and type in fastboot mode
Code:
fastboot erase recovery
fastboot flash recovery name_of_recovery.img

This one
http://db.tt/Krlm4dPs
Rename the file to recovery.img and put it inside the fastboot folder on the pc ! Then flash it
Also fastboot erase cache afterwards ......

R: My HOX just briked
Use TWRP if you want using Viper.
I say that because with twrp you don't have problem with ota.
Sent from HOX

Twrp recovery
http://db.tt/aYgw4fuh

Thanks everyone for helping me I really really appreciate it.:good:
It worked ^-^
I just restored my original back up, even when i wasnt able to wipe Dalvik Cache. And now I can wipe Dalvik Cache again. That was a really bad moment, but I just managed it with the help of you^^ guess I wont be changing my ROM for a while now lol...:laugh:

Nice !!!

R: My HOX just briked
I advise you to keep TWRP because it is best of CWM
Happy flashing
Sent from Nexus 7 with TapaHD

Yes use this
HTC ONE X Using TapaTalk