Develop Bugs

[Q]cyanmobile a

I'm currently on CM 7.2 phiex and I'm wondering if the battery life and performance is better on cyanmobile A. Can anyone help me?
Sent from my GT-S5660M using xda premium

they are about the same for those things....cyanmobile has lots of additional features but I found the vibrate along with ring or notification does not work....if you need that.

Oh ok thanks that's all I need to know
Sent from my GT-S5660 using xda premium

bdasmith said:
they are about the same for those things....cyanmobile has lots of additional features but I found the vibrate along with ring or notification does not work....if you need that.
Click to expand...
Click to collapse
it already work on second update
Sent from my GT-S5660 using XDA

does it really? i tried it, but did not want to vibrate....could only get any vibrate when "system" set to "always" vibrate....thats not what i want though

Volume solutions on JB?

HI
Is there any volume solution on JB? as Volume+ doesn't work.. this is really annoying, the volume is simply unhearable!

+1
Sent from my Galaxy Nexus using xda premium

Trinity kernel app has volume boost if your using there kernel it seems to work good for me.
Sent from my Galaxy Nexus using xda premium

I've been using DSP manager. Its for ICS but works on JB 4.1.1. Flashable cwm zip make a backup before flashing!
http://db.tt/c0ks5eNs
Sent from my Galaxy Nexus using xda premium

One quick note: I ran into problems with DSP Manager because I was undervolting my phone. When the screen went off, the phone's CPU was restricted too much and any media would have a slight stutter to it. Anyway, not a problem if you're not undervolting, just a word of advice.

Ok thanks everyone
Backing up now, and will flash DSP in a couple of minutes. will report back

Volume+ is working for me.....
Sent from my Galaxy Nexus using xda app-developers app

So I flashed DSP, it installed, but not working at all, does not affect the volume in any way, I checked the DSP under sounds..
How does Volume+ work for you?? are you ob JB? does it work on all volume levels such as ringtones, notifications etc.. ??

omricn said:
So I flashed DSP, it installed, but not working at all, does not affect the volume in any way, I checked the DSP under sounds..
How does Volume+ work for you?? are you ob JB? does it work on all volume levels such as ringtones, notifications etc.. ??
Click to expand...
Click to collapse
Yep I m on jb........... it works on all.....ringtone, notification, play music .........

Yup, Volume+ working fine for me too.

pranavhooda said:
Yep I m on jb........... it works on all.....ringtone, notification, play music .........
Click to expand...
Click to collapse
MS. said:
Yup, Volume+ working fine for me too.
Click to expand...
Click to collapse
That's odd.. it only works for music on my GN. ringtones, notifications etc' stay very weak, and it's not only me, the reviews on the volume+ google play page are bombarded by JB users who lost the functionality of volume+.. sucks..

I never used volume +...but most kernels have high performance sound and maximum sound tweaks that I use and love. I know Franco and trinity have them.
Sent from my Galaxy Nexus using xda premium

lucas.scott said:
I never used volume +...but most kernels have high performance sound and maximum sound tweaks that I use and love. I know Franco and trinity have them.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
tnx mate, thing is I want to stay stock..

Ah crap ... missed that. Sorry man
Sent from my Galaxy Nexus using xda premium

omricn said:
tnx mate, thing is I want to stay stock..
Click to expand...
Click to collapse
Um...Just curious, couldn't you just boot into CWM then flash only the kernal without root? Never tried it, but I'm wondering... If you do that, only thing you need to do to go to stock is flash kernal back to stock...

Did u go to settings>sound>music effects ? Enable DSP manager or volume + from there
Sent from my Galaxy Nexus using xda premium

lucas.scott said:
I never used volume +...but most kernels have high performance sound and maximum sound tweaks that I use and love. I know Franco and trinity have them.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
lucas.scott said:
Ah crap ... missed that. Sorry man
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Sorry for what dude? :good:
kyokeun1234 said:
Um...Just curious, couldn't you just boot into CWM then flash only the kernal without root? Never tried it, but I'm wondering... If you do that, only thing you need to do to go to stock is flash kernal back to stock...
Click to expand...
Click to collapse
Exactly what I was thinking also.. maybe I'll give it a shot

minhajmsd said:
Did u go to settings>sound>music effects ? Enable DSP manager or volume + from there
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Yeah I did.. no luck..

I found the volume in cm10 preview to be much louder.
Sent from my Galaxy Nexus using xda premium

Make sure DSP is selected in settings and in DSP try these settings
Sent from my Galaxy Nexus using xda premium

(Fix) MHL - HDMI TV out for jb roms

Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium

bmakk2055 said:
Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
trying it out now! :good:
It works but does not auto rotate. Still though it works! appreciate it!

jctusa7 said:
trying it out now! :good:
Click to expand...
Click to collapse
Is it working for you?
Sent from my SAMSUNG-SGH-T989 using xda premium

No dice for me. Running CM 10.0.0 final.

fideli. said:
No dice for me. Running CM 10.0.0 final.
Click to expand...
Click to collapse
Plug in to TV then reboot and when phone starts it will pop up on TV
Sent from my SAMSUNG-SGH-T989 using xda premium

THANKS!!!
I tried it, and even pluged it in before a reboot but nothing shows up on screen. I see a little flickering, but nothing else.
Also, are you placing "com.qc.hdmi_out" under "Property Name" or "property Key"?
you may want to add "true" o your directions, they are not specific.
Thank you for your efforts none the less! This is a great step in the right direction. :good:

Works well thanks
Sent from my Galaxy Nexus using Tapatalk 2

Works thanks but does not rotate

supersain08 said:
Works thanks but does not rotate
Click to expand...
Click to collapse
That's how it was on cm9. Try this https://play.google.com/store/apps/details?id=nl.fameit.rotate
Sent from my SGH-T989 using xda premium

bmakk2055 said:
Plug in to TV then reboot and when phone starts it will pop up on TV
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Works. A bit inconvenient but works nonetheless. Thanks a lot.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Worked for me
Sent from my SGH-T989 using xda premium

Will this work with official cm 10?
Sent from my HTC Ruby using xda app-developers app

aznvi3tric3guy said:
Will this work with official cm 10?
Sent from my HTC Ruby using xda app-developers app
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-T989 using xda premium

tried this and it worked. only issue that remains for me is when the MHL cable loses power or is unplugged, the only way to re-initiate the hdmi-out sync is with a reboot of the device. anyone know of a way to manually trigger a resync?

Can anyone post a flashable fix for this, I am at my uncles house and was planning on watching a movie with my cousins and then I realized my jb ROM doesn't have mhl support :/
Sent from my SGH-T989 using Tapatalk 2

Nismo13 said:
Can anyone post a flashable fix for this, I am at my uncles house and was planning on watching a movie with my cousins and then I realized my jb ROM doesn't have mhl support :/
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
That would be hard because everyone's buildprop is different depending on the rom....
Sent from my SGH-T989 using xda premium

Nvm I figured it out , thanks!
Sent from my SGH-T989 using Tapatalk 2

Anyone have any idea why this isn't directly incorporated into CM10?

bmakk2055 said:
Use a build.prob editor and add the following....
1. com.qc.hdmi_out
2. ro.hdmi.enable
3. Reboot
4. Hit the thanks button if I helped
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
For me, setting "ro.hdmi.enable=true" does the job. I tried your com.qc.hdmi_out line also, but found that I had difficulty getting consistent results, but devices may differ. ROMs earlier than 10.0.0 Stable often crashed after using HDMI, after pulling out the cable, even though the video worked well up till that point. But recent ROMs seems to be stable for me.
It is a frustration for me that those who (probably) know about the deeper aspects of this issue (why it was never turned on in the default configuration) never comment on it, so those who want it to work spend lots of time fiddling with it. On the teamhacksung site, a statement was made that it will never work because it involves proprietary code, but that was some time ago, so who knows? The fact that it works well seems to suggest that all the needed code is present and functional, so the mystery is why it is never addressed by the developers explicitly, or turned on by default, or have a setting to turn it on as Galaxy S had.

jpnelson40 said:
For me, setting "ro.hdmi.enable=true" does the job. I tried your com.qc.hdmi_out line also, but found that I had difficulty getting consistent results, but devices may differ.
Click to expand...
Click to collapse
can you explain what you mean by the not getting consistent results? i'm going to try this approach and see what i get today.

Leaked jellybean help plz

Ok guys I honestly dont have time to search this but my question is this jelly bean leak is so buggy how can I got back to the lastest ics update.... im fully stock no root access
Sent from my SPH-D710 using xda premium

bluedevils2003 said:
Ok guys I honestly dont have time to search this but my question is this jelly bean leak is so buggy how can I got back to the lastest ics update.... im fully stock no root access
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Well, at least you were honest about not searching so I'll answer..
Go here, download the latest ICS one click..
:edit: Obviously you'll want the Restore and not the no data..
http://forum.xda-developers.com/showthread.php?t=1903252

Thank you so much
Sent from my SPH-D710 using xda premium

bluedevils2003 said:
Ok guys I honestly dont have time to search this but my question is this jelly bean leak is so buggy how can I got back to the lastest ics update.... im fully stock no root access
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Buggy? What do you mean buggy?I have had a near flawless experience

My led notifications dont work for any mseed calls emails texts nothing , and ive tried everything using different apps deleting apps and reinstalling them.. this is big thing for me being I cant have my volume on at work so having led lets me know I missed call or have a new email / text
Also I cant send or get mms.. called sprint no towers or any known issues , also pulled battery put back in still dont work
Apps get deleted from my home pages and its different apps each time ....
Once in a while it will try to make a emergency call
Sent from my SPH-D710 using xda premium

Also battery life went to ****.... on stock ics I was getting 10-12hrs with medium usage ... on this leak im only getting 4 to 6 if im lucky
Sent from my SPH-D710 using xda premium

Are you interested in trouble shooting or are you to the point that you're set to jump back to ICS?
If you are interested in trying to figure out your issues; we'd need to know which FK23 you used to start. You said you were stock/unrooted so I'd assume you used the .tar file with Odin, but I don't want to assume.
Like third son, I use Fk23 as my dd and have, so far, had a great experience to my delight. I used the intial .tar with pc Odin.

I would start from scratch. Sounds like you got a flacky install.

I guess I can try again... I followed the youtube video from qbking77 so whatever the video used is what I used lol
I mean I like this update but to buggy for me
So ill give it one more try. Any other way to try it would be great
Sent from my SPH-D710 using xda premium

Takenover83 said:
I would start from scratch. Sounds like you got a flacky install.
Click to expand...
Click to collapse
+1 to this.
OP - Try this link. (I'm am not saying it's better than _dan's, Mattix's, garwynns / nor am I saying unrooted is better than rooted. I'm saying this is the build that's my DD and has been great for me.)
Be advised to backup everything important from your phone prior. Read everything and take your time. I know you were busy but don't rush.
If you have any questions, I'm sure there are a ton of people willing to answer.
The Tar is complete (Rom/kernel/modem)
[LINK][JB][ODIN][TAR]SPH-D710 FK23 (TAR Only)

Ok will try when home from work... btw are you rooted
Sent from my SPH-D710 using xda premium

Also when I try that...I just follow steps right ... I dont have to reflash ics first right
Sent from my SPH-D710 using xda premium

third son said:
Buggy? What do you mean buggy?I have had a near flawless experience
Click to expand...
Click to collapse
bluedevils2003 said:
My led notifications dont work for any mseed calls emails texts nothing , and ive tried everything using different apps deleting apps and reinstalling them.. this is big thing for me being I cant have my volume on at work so having led lets me know I missed call or have a new email / text
Also I cant send or get mms.. called sprint no towers or any known issues , also pulled battery put back in still dont work
Apps get deleted from my home pages and its different apps each time ....
Once in a while it will try to make a emergency call
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
bluedevils2003 said:
Also battery life went to ****.... on stock ics I was getting 10-12hrs with medium usage ... on this leak im only getting 4 to 6 if im lucky
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
LED flashes blue for me when I get notifications
mms works instantly
gps is a near instant lock (unless I am in a known dead zone)
I got 16hr of battery yesterday with over 3h of screen time and still had 32% left in my battery before I plugged it in.
I had some problems using AGATs recovery. I did an initial install of the TAR (which erased my internal SD) then I flashed the one click and AGAT ( when they were first posted.and had some screen brightness issues) I tried a nandroid with the recovery and it nuked all my apps. I went back to the TAR (with ODIN) and have rooted stock now with no problems. Used Titanium backup to rid myself of the Sprintware. Waiting for source to droppatiently waiting :crying:waiting....:angel:
Don't give up on FK23 yet...once it is installed correctly it hits on all cylinders......

bluedevils2003 said:
Ok will try when home from work... btw are you rooted
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No. I have no need for root at this time.
bluedevils2003 said:
Also when I try that...I just follow steps right ... I dont have to reflash ics first right
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
No, you don't have to reflash ICS. When you get home and if you have questions before hand, just ask.

Everything you mentioned works fine for me. Except apps disappearing from homepage, I got that too. Unless you move them to the internal sd it will keep happening. Hopefully that's fixed with FL04.. I have way too much apps and need as much on external as possible.
Sent from my SPH-D710 using xda app-developers app

So which parts do I need ??
Sent from my SPH-D710 using xda premium

bluedevils2003 said:
So which parts do I need ??
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Rom = Tar.md5
Sent from my SPH-D710 using xda app-developers app

bluedevils2003 said:
So which parts do I need ??
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
If you have the modem flashed already, don't worry about that one. Look on "about phone" to find out. The rooted one click will give you both kernel and rom. Are you familiar with how to do that? Not being a wise guy....just asking....
Here is the thread from xda. I think team sextape doesn't want us to link to their site (maybe I'm wrong)
http://forum.xda-developers.com/showthread.php?t=2021640
Just go into download mode and flash this....the unrooted one if rooting doesn't matter to you....

This what im running
Sent from my SPH-D710 using xda premium

bluedevils2003 said:
This what im running
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
YOu sir have jellybean..
You have the modem already..
all you need is the rom
Do you have PC verison of ODIN?
and btw you should try this rom by shadow god
Jellyverse V0.3
http://forum.xda-developers.com/showthread.php?t=2025466

Note II volume illusion rom

The volume of this room is pretty low. I'm sure it's not the phone as in other roms the volume is much louder. I can barely hear YouTube in a public setting. Lol. Anyone know how to fix this? Thanks!
Sent from my GT-N7105 using xda app-developers app

Maybe give the Viper Modz a try here: http://forum.xda-developers.com/showthread.php?t=2191223
or ask in the thread of the Rom...

Tried in the thread but then there all this is a developer thread! Lol. And will do. Thanks
Sent from my GT-N7105 using xda app-developers app

I believe you can flash the NEAK kernel, then install the uNEAK app from the Market and adjust the volume. Did this last night on PAC-Man rom and volume is nice and loud now
Got it from here:
http://forum.xda-developers.com/showthread.php?t=2000328
Sent from my SGH-I317 using Tapatalk 2

I also use the Neak Kernel with Beanstalk and use the uNeak app from the Playstore. You can adjust the mic, headphones and speaker volumes. If it's compatible with your Rom, might want to give it a try.

slaydog said:
I believe you can flash the NEAK kernel, then install the uNEAK app from the Market and adjust the volume. Did this last night on PAC-Man rom and volume is nice and loud now
Got it from here:
http://forum.xda-developers.com/showthread.php?t=2000328
Sent from my SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Neva Eva Forget 1984 said:
I also use the Neak Kernel with Beanstalk and use the uNeak app from the Playstore. You can adjust the mic, headphones and speaker volumes. If it's compatible with your Rom, might want to give it a try.
Click to expand...
Click to collapse
Kinda wanted to stay on stock kernel but if those viper apps mentioned previously before don't work I'ma have to switch. Thanks guys!
Sent from my GT-N7105 using xda app-developers app

Sebastianq28 said:
Kinda wanted to stay on stock kernel but if those viper apps mentioned previously before don't work I'ma have to switch. Thanks guys!
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Viper works flawlessly on most if not all Rom's!! There's a lot of info on the page. So if you can figure out how to get everything working. That'll be a great accomplishment grasshopper!
Lol
Sent from SKYNOTE using Taptalk 2

Bajanman said:
Viper works flawlessly on most if not all Rom's!! There's a lot of info on the page. So if you can figure out how to get everything working. That'll be a great accomplishment grasshopper!
Lol
Sent from SKYNOTE using Taptalk 2
Click to expand...
Click to collapse
This...^^^^^^^^^.....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app

Bajanman said:
Viper works flawlessly on most if not all Rom's!! There's a lot of info on the page. So if you can figure out how to get everything working. That'll be a great accomplishment grasshopper!
Lol
Sent from SKYNOTE using Taptalk 2
Click to expand...
Click to collapse
gregsarg said:
This...^^^^^^^^^.....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Lol I'm reading through the thread and holy crap. It's somewhat Confusing. Lol and I'm not sure which of the Apps to choose... Or how to find out which cpu type to choose.. So confused! Lol
Sent from my GT-N7105 using xda app-developers app

Sebastianq28 said:
Lol I'm reading through the thread and holy crap. It's somewhat Confusing. Lol and I'm not sure which of the Apps to choose... Or how to find out which cpu type to choose.. So confused! Lol
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Here ya go. This is what I did http://forum.xda-developers.com/showpost.php?p=43953284&postcount=2053
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4

So you didn't mess with any setting at all? Just installed the app then added all those files and chose one you likes?
Just to make sure
which of the 2 apps did you download?
What cpu setting did you choose?
Which of the ir files did you like the best? Haha
And thanks a ton man!
Sent from my GT-N7105 using xda app-developers app

Bajanman said:
Here ya go. This is what I did http://forum.xda-developers.com/showpost.php?p=43953284&postcount=2053
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
gregsarg said:
This...^^^^^^^^^.....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Neva Eva Forget 1984 said:
Maybe give the Viper Modz a try here: http://forum.xda-developers.com/showthread.php?t=2191223
or ask in the thread of the Rom...
Click to expand...
Click to collapse
So I found out the ViPER4Android might be the solution to my volume issues. But every time i go to settings > Device > Sound > MUSIC EFFECTS I get an error that says "Unfortunately, Settings has stopped" Anyone getting this? is there a fix?
Sent from my GT-N7105 using xda app-developers app

Sebastianq28 said:
So you didn't mess with any setting at all? Just installed the app then added all those files and chose one you likes?
Just to make sure
which of the 2 apps did you download?
What cpu setting did you choose?
Which of the ir files did you like the best? Haha
And thanks a ton man!
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Ok I'll post what I downloaded..
Sebastianq28 said:
So I found out the ViPER4Android might be the solution to my volume issues. But every time i go to settings > Device > Sound > MUSIC EFFECTS I get an error that says "Unfortunately, Settings has stopped" Anyone getting this? is there a fix?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Ok you may have just installed the wrong one. Delete the one you have installed first. Then reboot and reinstall the new one!
Here's the one I used:
http://db.tt/XTj0YXNH
And you only need one installed!
As far as the other sound file's, I highlighted which one I downloaded from the viper page.
You just have to use a file explorer to move the files to the correct folder!
Once your done, start a song then open viper audio mod. And change your setting! From there...
FYI:
Keep in mind that if you have a Bluetooth earpiece connected. And then if you connect into the headphone jack. It'll default to the Bluetooth sound for you headphone jack. Until you disconnect the Bluetooth. Then it'll default to the headset setting in VIPER..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4

Bajanman said:
Ok I'll post what I downloaded..
Ok you may have just installed the wrong one. Delete the one you have installed first. Then reboot and reinstall the new one!
Here's the one I used:
http://db.tt/XTj0YXNH
And you only need one installed!
As far as the other sound file's, I highlighted which one I downloaded from the viper page.
You just have to use a file explorer to move the files to the correct folder!
Once your done, start a song then open viper audio mod. And change your setting! From there...
FYI:
Keep in mind that if you have a Bluetooth earpiece connected. And then if you connect into the headphone jack. It'll default to the Bluetooth sound for you headphone jack. Until you disconnect the Bluetooth. Then it'll default to the headset setting in VIPER..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Click to expand...
Click to collapse
Ok i Downloaded the file but still have a couple questions.
1. Do I Just use the apk in the file you gave me? or do i need anything else from that folder to install?
2. Once installed what CPU type do I choose for the AT&T Galaxy Note II?

Sebastianq28 said:
Ok i Downloaded the file but still have a couple questions.
1. Do I Just use the apk in the file you gave me? or do i need anything else from that folder to install?
2. Once installed what CPU type do I choose for the AT&T Galaxy Note II?
Click to expand...
Click to collapse
Ok I taught I gave you just the apk.
Here try this one it's the apk only:
http://db.tt/f0spvlYv
But you can use the first one I gave you also. I think I use the file on the right of that zip.
The apk I used was like 1.28mb..
Cpu setting..
After install, open, then install driver. It's the last one on the list A9/15..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta

Bajanman said:
Ok I taught I gave you just the apk.
Here try this one it's the apk only:
http://db.tt/f0spvlYv
But you can use the first one I gave you also. I think I use the file on the right of that zip.
The apk I used was like 1.28mb..
Cpu setting..
After install, open, then install driver. It's the last one on the list A9/15..
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Click to expand...
Click to collapse
lol i got the app working and it only BARELY raises the volume and for some reason the tweaks only work on speaker? not an headphone?

Sebastianq28 said:
lol i got the app working and it only BARELY raises the volume and for some reason the tweaks only work on speaker? not an headphone?
Click to expand...
Click to collapse
Then something is wrong. Did you perform a reboot after you installed the driver?
Because all mine work. Headset, speaker, Bluetooth, they all change the sound. If you have some head phones use those to set it up.
What steps do you do. Do you know what to turn on and what not to? All the info is on the viper page!!
Check post#2 the sound setting are there...
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4

Yes I did the reboot. And the thing is when I tried to set it up with my headphones (audio technica brand) no setting changed any sound. I could turn anything on or off and no change would reflect.
Sent from my GT-N7105 using xda app-developers app

Sebastianq28 said:
Yes I did the reboot. And the thing is when I tried to set it up with my headphones (audio technica brand) no setting changed any sound. I could turn anything on or off and no change would reflect.
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
I'll send you some instructions on how to get it done
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4

OK thanks. I'll wait for em
Sent from my GT-N7105 using xda app-developers app