Related
Hey,
has anybody already tried out the docking station?
Is it possible to fit the Note including a flip case into the station?
Does the station have an audio/video out or is it only for charging?
wasabah said:
Hey,
has anybody already tried out the docking station?
Is it possible to fit the Note including a flip case into the station?
Does the station have an audio/video out or is it only for charging?
Click to expand...
Click to collapse
Sorry... docking station ? More details please?.
It has a speaker out port, but sadly is not compatible with the flip case; too much extra bulk around the side and back. Very nice if you don't use the flip case, though, the Note slips easily into the dock, and it looks elegant.
ianjd said:
It has a speaker out port, but sadly is not compatible with the flip case; too much extra bulk around the side and back. Very nice if you don't use the flip case, though, the Note slips easily into the dock, and it looks elegant.
Click to expand...
Click to collapse
According to this video starting at the 10 sec mark; it fits fine with the flip cover.
http://www.youtube.com/watch?v=rOlJbJnvpfw
3_D said:
According to this video starting at the 10 sec mark; it fits fine with the flip cover.
http://www.youtube.com/watch?v=rOlJbJnvpfw
Click to expand...
Click to collapse
Wow, that docking is pretty nice. It looks like the leather flip cover will still work with it. Now the questions is where can I get one.
i received it today, its nice and much easy to put and pull the phone. in the box there is only the dock, they dont add nothing else. u can turn it landscape (with the phone docked). 49€ with shipping, in italy, expensive...
00roberto00 said:
i received it today, its nice and much easy to put and pull the phone. in the box there is only the dock, they dont add nothing else. u can turn it landscape (with the phone docked). 49€ with shipping, in italy, expensive...
Click to expand...
Click to collapse
But there is a charging cable included? Or do I have to use the one that I already have?
34 Euro is the cheapest I could find here in Germany.. still very expensive @[email protected]
I wouldn't say it fits fine with the flip case; because of the extra bulk on the side, some pressure is required to jam it in, and because of the extra bulk on the back, the Note has to be tilted forward to mate with the USB connector, and you can't just drop it into the dock. You can make it work, but it's really not comfortable, and I'd be worried about damaging the connector. If they showed someone dropping it into the dock on the video, it would not look quite such a good combination.
That Dock would be just perfect if it came with an external battery fitted within it to be used as a stand while away from a power source.
Might still get one though.
3_D said:
According to this video starting at the 10 sec mark; it fits fine with the flip cover.
http://www.youtube.com/watch?v=rOlJbJnvpfw
Click to expand...
Click to collapse
Is that a BROWN flip case???? I thought they all Black?
Here are some nice pictures by a German fellow:
http://www.android-hilfe.de/zubehoer-fuer-samsung-galaxy-note/162759-dockingstation-fuer-samsung-galaxy-note.html#post2238012
The official dock does not seem to allow use of an MHL adaptor on the back of the dock. Power still goes to the Note but no HDMI output. Tried several times, even tried internal/external speakers settings in "Dock" but no difference - still no video.
Can anyone else confirm?
PS. The dock does not come with a power supply, you just use you existing PSU/lead.
ianjd said:
I wouldn't say it fits fine with the flip case; because of the extra bulk on the side, some pressure is required to jam it in, and because of the extra bulk on the back, the Note has to be tilted forward to mate with the USB connector, and you can't just drop it into the dock. You can make it work, but it's really not comfortable, and I'd be worried about damaging the connector. If they showed someone dropping it into the dock on the video, it would not look quite such a good combination.
Click to expand...
Click to collapse
Have you actually experienced this, or are you speculating? I don't believe the Samsung flip case adds any extra bulk at the back, as it replaces the original back cover.
Loftus said:
Have you actually experienced this, or are you speculating? I don't believe the Samsung flip case adds any extra bulk at the back, as it replaces the original back cover.
Click to expand...
Click to collapse
I have the cover and dock. I watched the video and though the Note did fit in the dock with the cover and ordered both, but it doesn't.
One the left side the back cover is thicker to allow room for the leather flap. You can still use the dock by titling the phone forward at the top but the the only thing supporting the phone is the dock connector.
Once I get a screen protector I'll remove the cover as I'd like to use the dock and it will be easier to use with my car dock.
The case does make holding the phone easier and it feels more secure in your hand.
Sent from my GT-N7000 using xda premium
Loftus said:
Have you actually experienced this, or are you speculating? I don't believe the Samsung flip case adds any extra bulk at the back, as it replaces the original back cover.
Click to expand...
Click to collapse
Yes, I have. The back is more substantial than the rather flimsy original battery cover, making e.g., the camera more recessed, and the extra width of the flap doesn't help the device slide down, either.
So is the dock useless if you have the flip cover-case on? Or can you use the dock, although the phone doesn´t fit "perfectly"? I´m considering getting both accessories, but am a bit confused.
wasabah said:
But there is a charging cable included? Or do I have to use the one that I already have?
34 Euro is the cheapest I could find here in Germany.. still very expensive @[email protected]
Click to expand...
Click to collapse
not any charging cable or anything else than the pure dock.
but the charging cable is standard USB-microUSB
---------- Post added at 09:40 AM ---------- Previous post was at 09:19 AM ----------
htc6500uk said:
The official dock does not seem to allow use of an MHL adaptor on the back of the dock. Power still goes to the Note but no HDMI output. Tried several times, even tried internal/external speakers settings in "Dock" but no difference - still no video.
Can anyone else confirm?
PS. The dock does not come with a power supply, you just use you existing PSU/lead.
Click to expand...
Click to collapse
does it works without the dock? i cant see nothing on my monitor, with or without the dock.
information from Clove UK on acessories
Samsung Galaxy Note Accessories–Now available to order
Friday, November 11, 2011
If you are one of the owners of the new Samsung Galaxy Note, you can now order some accessories for delivery by the end of the month.
Available for order now are the desktop dock, car kit, MHL/HDMI adapter and stylus holder kit.
Samsung Galaxy Note MHL/HDMI Adaptor:
http://www.clove.co.uk/samsung-galaxy-note-mhlhdmi-adaptor
Samsung Galaxy Note Vehicle Dock: http://www.clove.co.uk/samsung-galaxy-note-official-vehicle-dock
Samsung Galaxy Note Desktop Dock:
http://www.clove.co.uk/samsung-galaxy-note-official-desktop-dock
I wouldn't use them together. It's a really tight fit because of the flip on the left, so doesn't slide down as easily as the naked Note, and needs to be jammed in. Because of the thicker battery cover, when the microUSB connector is mated, the Note is tilted forward, putting stress on the connector.
Sebring5 said:
Samsung Galaxy Note Accessories–Now available to order
Friday, November 11, 2011
If you are one of the owners of the new Samsung Galaxy Note, you can now order some accessories for delivery by the end of the month.
Available for order now are the desktop dock, car kit, MHL/HDMI adapter and stylus holder kit.
Samsung Galaxy Note MHL/HDMI Adaptor:
http://www.clove.co.uk/samsung-galaxy-note-mhlhdmi-adaptor
Samsung Galaxy Note Vehicle Dock: http://www.clove.co.uk/samsung-galaxy-note-official-vehicle-dock
Samsung Galaxy Note Desktop Dock:
http://www.clove.co.uk/samsung-galaxy-note-official-desktop-dock
Click to expand...
Click to collapse
Handtec.co.uk is a lot cheaper on all the Note accessories.
Just got my OEM car & desk dock from eBay (they aren't easily available in Canada yet).
First off, I have a T989D aka Galaxy S2 X (from Telus in Canada) and it fits (of course, as the hardware is the same).
Long story short:
Car dock:
The car dock is fantastic. It's a hard rubber that flexes easily enough to get the phone in and out without much trouble. It has a tab on one end to assist.
If you need a car dock, don't think twice, buy it.
Desk Dock
I wasn't sure how they were going to deal with the "chin" on the bottom of the phone. Basically, the dock doesn't have any front-to-back support for the phone... it's not a "slot". However, there is some friction so the phone doesn't flop around. That said, don't be tossing it around with the phone in it, as you'll risk breaking off the USB port that the phone is docked to.
Otherwise, it's great. It doesn't have an active speaker (like some pics show), but a little duct so the phone's sound can get out.
Photos please?
mangiant said:
Car dock:
The car dock is fantastic. It's a hard rubber that flexes easily enough to get the phone in and out without much trouble. It has a tab on one end to assist.
Click to expand...
Click to collapse
Do you think there is enough "flex" to fit with a thin TPU case?
MisterEdF said:
Do you think there is enough "flex" to fit with a thin TPU case?
Click to expand...
Click to collapse
No ghost armour is to much for.it fits tight on the corners
Sent from my SGH-T989 using XDA App
mangiant said:
Just got my OEM car & desk dock from eBay (they aren't easily available in Canada yet).
First off, I have a T989D aka Galaxy S2 X (from Telus in Canada) and it fits (of course, as the hardware is the same).
Long story short:
Car dock:
The car dock is fantastic. It's a hard rubber that flexes easily enough to get the phone in and out without much trouble. It has a tab on one end to assist.
If you need a car dock, don't think twice, buy it.
Desk Dock
I wasn't sure how they were going to deal with the "chin" on the bottom of the phone. Basically, the dock doesn't have any front-to-back support for the phone... it's not a "slot". However, there is some friction so the phone doesn't flop around. That said, don't be tossing it around with the phone in it, as you'll risk breaking off the USB port that the phone is docked to.
Otherwise, it's great. It doesn't have an active speaker (like some pics show), but a little duct so the phone's sound can get out.
Click to expand...
Click to collapse
How do you like it so far?
Add me to the list of satisfied customers for the car dock. As soon as you plug in the USB port, it goes to Car mode (VLingo leaves a little bit to be desired though). The dock is a perfect fit for the phone (probably won't be able to use a case with it though) and seems to be of good quality. Very sturdy.
wtang said:
Photos please?
Click to expand...
Click to collapse
+ 1 and/or a video ?
I have both of these as well. The car dock is a VERY tight fit. So tight that sometimes I can't get the phone out of it without hitting one of the buttons. I don't like that for some reason when the dock is connected and an aux cable is used sound does not automatically rout to the car speakers and instead still tries to go through the phone speaker. Is that normal??
The desktop dock I love. The USB port has just a little bit of give so that I can pull the phone out from the front without using the sides of the phone and hitting a volume button or unlock button.
are you talking about this one?
[REVIEW] OEM SGS2 T989 Spare Battery Charging System & Phone Stand
some photos might help
mangiant said:
Desk Dock
I wasn't sure how they were going to deal with the "chin" on the bottom of the phone. Basically, the dock doesn't have any front-to-back support for the phone... it's not a "slot". However, there is some friction so the phone doesn't flop around. That said, don't be tossing it around with the phone in it, as you'll risk breaking off the USB port that the phone is docked to.
Otherwise, it's great. It doesn't have an active speaker (like some pics show), but a little duct so the phone's sound can get out.
Click to expand...
Click to collapse
Yeah thats a good point AllGamer. I was talking about the full desktop dock.
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=9af5fe3e-6380-4105-8ec1-3d7c16d3d19c&inCart=True&catCode=22
I bought the multimedia desktop dock about a month ago at the T-Mobile store for $50.00+tax. Looks like you got a better deal online. To tell you the truth, I'm not that impressed with it. I think i bought it because I had just got the Hercules and I wanted all the cool accessories to be even cooler. Lol. Its basically a very expensive phone charger. Just my thoughts, don't let my opinion change your mind. I actually put it on Craigslist yesterday for $30.00. Lol...
Sent from my SGH-T989
rickm8384 said:
Yeah thats a good point AllGamer. I was talking about the full desktop dock.
http://www.t-mobile.com/shop/AddOns/Accessories/AccessoryDetailPopUp.aspx?accessory=9af5fe3e-6380-4105-8ec1-3d7c16d3d19c&inCart=True&catCode=22
Click to expand...
Click to collapse
ahh, see now we are getting some where
that's definitely a good one, but it wont fit with the D3O case or anything thicker than a thin skin
rickm8384 said:
I have both of these as well. The car dock is a VERY tight fit. So tight that sometimes I can't get the phone out of it without hitting one of the buttons. I don't like that for some reason when the dock is connected and an aux cable is used sound does not automatically rout to the car speakers and instead still tries to go through the phone speaker. Is that normal??
Click to expand...
Click to collapse
Agreed an the tight fit. I'm always hitting buttons when taking the phone out of the dock. For your speaker issue, check off the box for audio output mode in the dock settings .
Sent from my SGH-T989 using XDA App
JPinAZ said:
Agreed an the tight fit. I'm always hitting buttons when taking the phone out of the dock. For your speaker issue, check off the box for audio output mode in the dock settings .
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
I knew it had to be something simple like that! Thank you kind sir. You are a gentleman and a scholar.
Will this output music and sound from ANY app or only native apps (e.g. Sammsung stock music app vs. Google Music app)
AllGamer said:
ahh, see now we are getting some where
that's definitely a good one, but it wont fit with the D3O case or anything thicker than a thin skin
Click to expand...
Click to collapse
What thin skin will it fit? I have one and am just waiting to find a skin that will work with it
Sent from my SGH-T989 using Tapatalk
juntjoo said:
What thin skin will it fit? I have one and am just waiting to find a skin that will work with it
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
LOL exactly that just that
either fashion skins http://www.skinit.com/devices/phone
or those "indestructible" skins from Zagg
rickm8384 said:
Will this output music and sound from ANY app or only native apps (e.g. Sammsung stock music app vs. Google Music app)
Click to expand...
Click to collapse
I'm sure you've figured it out by now, but for others it will output sound from anything. Notifications are still through the phone. I thought I saw a setting to change that somewhere but I can't find it now.
Sent from my SGH-T989 using XDA App
eMace said:
Add me to the list of satisfied customers for the car dock. As soon as you plug in the USB port, it goes to Car mode (VLingo leaves a little bit to be desired though). The dock is a perfect fit for the phone (probably won't be able to use a case with it though) and seems to be of good quality. Very sturdy.
Click to expand...
Click to collapse
How does it automatically go into car dock mode? There isn't a magnet or anything in the dock that trips a sensor is there? I'm assuming that is a software setting?
Sent from my SGH-T989 using Tapatalk
egrims said:
How does it automatically go into car dock mode? There isn't a magnet or anything in the dock that trips a sensor is there? I'm assuming that is a software setting?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Not sure. There's a docking part of the mount that slides into the phone's microUSB. Could be a magnet. I don't think it's solely software, because you put any other microUSB into the phone and it won't go into car mode.
eMace said:
Not sure. There's a docking part of the mount that slides into the phone's microUSB. Could be a magnet. I don't think it's solely software, because you put any other microUSB into the phone and it won't go into car mode.
Click to expand...
Click to collapse
This "car mode" you speak of is using the stock launcher I presume which doesn't go into landscape mode without it(car mode). if I'm correct, do any of you know how to unleash landscape mode without activating car mode? I'm using go launcher because it's the fastest launcher I've found that has landscape mode but I'm wondering if the stock launcher is faster.
Sent from my SGH-T989 using Tapatalk
Folks can anyone recommend a decent car mount for the note? I don't want to use any adhesive or suction cup types since I am scared of those falling off.
Thanks
Sent from my Samsung Galaxy Note using Tapatalk
But the genuine one from.Samsung. its worth paying the premium I'm never going back oem
Sent from my GT-N7000 using xda premium
I've used a 'breffo spiderpodium' and found it pretty good.cheap and simple
Yeah but the official Samsung one uses a suction cup
Sent from my Samsung Galaxy Note using Tapatalk
the official samsung units have an amazing suction cup.
I had an official Samsung car dock for my P1000 Tablet, There was no way in hell that thing was ever going to fall off.
even sitting on the windshield in 40degC days (Australian summer), and cool night temp changes didn't move that sucker.
Hell, I had struggles getting it to release when I wanted it to release...
Samsung dont skimp on their kit... its why it costs so much more.
I have a proclipusa car mount. So I recently got the Regular Adjustable Holder with Tilt/Swivel here. You can get Proclipusa holders with the charging ports built-in as well specifically designed for the Note - but I wanted something I can use for future devices if needed. The adjustable holder works with my thin Rearth Ringke Slim case as well. I think I may need to add some extra padding to make it a little more snug and secure feeling. It seems to wobble a bit because the slot is a bit thicker than the Note (crazy thin btw).
I use a PHONEclip, which attaches the G-Note directly to the steering Wheel.
You can find detailed info here: http://forum.xda-developers.com/showpost.php?p=22252176&postcount=24
In the same thread also more info about the above mentioned 'breffo spiderpodium'
Went on Amazon, spiderpodium reviews were mixed, many found it to be very low quality construction.
That steering wheel clip sounds interesting, unfortunately I have a boxwave case on my phone. Probably wont fit.
Are there any US etailers selling the official Samsung one?
Sent from my Samsung Galaxy Note using Tapatalk
The samsung one is great been on a month or so and not moved a mm suction is solid
Sent from my GT-N7000 using xda premium
Mounting your Note on your steering wheel is not a good idea if you have an airbag... Just saying.
markuz85 said:
Mounting your Note on your steering wheel is not a good idea if you have an airbag... Just saying.
Click to expand...
Click to collapse
It's actually a bloody stupid idea.
markuz85 said:
Mounting your Note on your steering wheel is not a good idea if you have an airbag... Just saying.
Click to expand...
Click to collapse
oh yeah, I do have one :s
Sent from my Samsung Galaxy Note using Tapatalk
Got the Samsung one.. And there is no risk the suction will drop on you if you mounted it properly..
Ade5 said:
Got the Samsung one.. And there is no risk the suction will drop on you if you mounted it properly..
Click to expand...
Click to collapse
A bit too pricey for me, guess I'll just have to continue charging it by my cup holder for now...
markuz85 said:
Mounting your Note on your steering wheel is not a good idea if you have an airbag... Just saying.
Click to expand...
Click to collapse
hahahaha!!! So true and so unintentionally funny to envision, in mid-air-bag-deployment-to-face-contact! lmao
I can see the coroner's quote now:
"There's a good chance he'd have survived the impact with no more than a contusion and a couple of scrapes, but the force of the air-bag drove his near tablet-sized device clear through his skull and out the back side of his spinal column in what appears to be less time than it takes a humming bird to make a single wing-flap."
hmmm, you have a point there. So it's a choice between convenience or safety, difficult decision...
To answer seriously, I've checked it on my car and I think that it isn't a problem. The PHONEclip is made from a very strong material. So in stead of breaking, I expect it to work like a hinge and simply turn over the top of the steering wheel.
Proclip = Brodit
IMHO
for all my previous and recent smartphones I ever used Proclip holders in my car(s)
The Proclip platform is specific to each car model and the holder(s) are specific to each smartphone. I am using active holders with charging and I am very satisfied with it every time.
No excluding with my newest Samsung Galaxy Note too
I have the Samsung Car mount, and I am very disappointed.
It is a pain to insert the phone in the very tight clips, then you have to slide the usb connector into the phone, an exercise that takes two hands.
Further it does not accomodate even the very thin Samsung flip cover.
It forces the phone into car mode, which requires voice input - which does not work. - at least with my voice. I cannot call 'Nora' it will only find Laura - and I don't have a strong accent. It has no means of understanding what 'Home' means.
And now, after a month, it appears that contacts inside the car unit are flakey - the phone goes crazy when I plug it in.
So great phone, but they screwed up royally on the car mount.
So where can I get this Samsung Car Mount?
Mountek
Mountek has a universal car mount that sits in your CD slot for around $20.
http://www.amazon.com/Mountek-MT500...W3D4/ref=sr_1_1?ie=UTF8&qid=1328984576&sr=8-1
What Car dock do you guys recomend for Galaxy S III?
Looking for something that would do following:
1) activate car mode (is there one?, my atrix had it)
2) must be in landscape
3) attaches to the window
4) will work with galaxy S III that has a case on it.
walmart dude
i just picked up a mount for my galaxy s II at Walmart yesterday. nothing special but it mounts to the window/dash. and it has PLENTY of room for even the bulkiest of cases. don't know what its called at the moment but it was down by the ipod accessories. it has an iphone in the display picture but it fits.
I went online today to ask if Samsung has any immediate plans to release a custom car dock for the S3 and the customer service rep claimed there are no official plans as of now. I'm sure they'll come out with one eventually and that this isn't any sort of groundbreaking news but at least it's some sort of "official" statement. I did not contact the number she gave at the bottom of the chat transcript though I may try later on if I get some free time.
Edit: I realize now this was an automated response system I was dealing with rather than 'Lisa'. Apologies.
so, noone can recommend a good car dock?
nekrosoft13 said:
so, noone can recommend a good car dock?
Click to expand...
Click to collapse
I went with the Infuse 4G route and couldn't be more pleased with the decision:
http://forum.xda-developers.com/showthread.php?t=1744134&highlight=infuse
Jubmasterflex said:
I went with the Infuse 4G route and couldn't be more pleased with the decision:
http://forum.xda-developers.com/showthread.php?t=1744134&highlight=infuse
Click to expand...
Click to collapse
from what i heard that doesn't work with case, so not an option
Amazon - Xmount cd holder. It's awesome
Galaxy S3 - Locked...
nekrosoft13 said:
from what i heard that doesn't work with case, so not an option
Click to expand...
Click to collapse
Derp, skipped over bullet point number 4.
Pretty sure you won't get card ock mode with any 3rd party dock unless you program a NFC sticker for the device.
I've used Arkon products in the past and they always seemed to work. As far a using one with a case attached to your device, I wouldn't know, but you may have to do some measuring to ensure it will fit within one of these mounts:
http://www.arkon.com/Galaxy S III/index.html
nekrosoft13 said:
What Car dock do you guys recomend for Galaxy S III?
Looking for something that would do following:
1) activate car mode (is there one?, my atrix had it)
2) must be in landscape
3) attaches to the window
4) will work with galaxy S III that has a case on it.
Click to expand...
Click to collapse
Here's a site with a variety of car docks for the S3, including Samsung's OEM version
blueshop.com/samsung-galaxy-s3-car-mounts
Jubmasterflex said:
Derp, skipped over bullet point number 4.
Pretty sure you won't get card ock mode with any 3rd party dock unless you program a NFC sticker for the device.
I've used Arkon products in the past and they always seemed to work. As far a using one with a case attached to your device, I wouldn't know, but you may have to do some measuring to ensure it will fit within one of these mounts:
http://www.arkon.com/Galaxy S III/index.html
Click to expand...
Click to collapse
so you think only the samsung OEM one will work with car mode?
nekrosoft13 said:
so you think only the samsung OEM one will work with car mode?
Click to expand...
Click to collapse
Unless you can find another dock that includes a magnet (I guess you could always add one) to force car mode, then yes.
I'm using a Garmin Nuvi mount and it fits my S III perfectly with its case on. Its small and very secure on the dash or windshield. The only downside I have to use a separate usb charger which doesn't activate the car dock mode.
nekrosoft13 said:
What Car dock do you guys recomend for Galaxy S III?
Looking for something that would do following:
1) activate car mode (is there one?, my atrix had it)
2) must be in landscape
3) attaches to the window
4) will work with galaxy S III that has a case on it.
Click to expand...
Click to collapse
Check out this page to see what I did.....it covers all four points.
http://forum.xda-developers.com/showthread.php?p=28677574#post28677574
the_buzz_man
Check out my thread on hacking docks & how you can trip a dock mode with a resistor. Can hack one that fits and charges but doesn't trip dock mode to trip it.
http://forum.xda-developers.com/showthread.php?t=1754102
DIY docks & hacking docks tripping dock mode & AC charging mode
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
They say the ibolt dock that just came out should work. It's a little expensive for my taste but looks to work even with an otterbox commuter case, but not defender.
Sent from my SGH-T999
EvilAldo said:
They say the ibolt dock that just came out should work. It's a little expensive for my taste but looks to work even with an otterbox commuter case, but not defender.
Sent from my SGH-T999
Click to expand...
Click to collapse
That looks pretty good. Anything else out there?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
nekrosoft13 said:
That looks pretty good. Anything else out there?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Im in the same boat as you. I think the best we are going to do is getting just any we like and add an NFC sticker on it to change the mode for us. The iBolt will do this, but not sure I want to spend $50 for that, when I can get one with a charger for $20 and I have some NFC stickers already. Im not going to take the case off everytime I want to dock the thing for sure , otherwise Id grab the infuse one.
It looks like most of them will fit on my Garmin bean bag mount so I dont have to stick it on the windshield each time as I live in Texas and it wont stay on in the heat all day Im sure.
with ibolt you have to remove the case?
I went with the ibolt it does all you have listed but it is a bit pricey. So far though, it is sturdy. To answer the post above, no you dont have to remove the case. I hear it fits the otterbox so thick cases probably work too.
nekrosoft13 said:
What Car dock do you guys recomend for Galaxy S III?
Looking for something that would do following:
1) activate car mode (is there one?, my atrix had it)
2) must be in landscape
3) attaches to the window
4) will work with galaxy S III that has a case on it.
Click to expand...
Click to collapse
Jubmasterflex said:
Unless you can find another dock that includes a magnet (I guess you could always add one) to force car mode, then yes.
Click to expand...
Click to collapse
The GS3 dock modes aren't set by magnets but a specific resistance across 2 of the USB pins.
There is a different resistance for the car and desk modes.. There is a thread around that specifies those values.
Sent from my YP-G70 using xda app-developers app
**UPDATE 8/17/2012**
I've been working on many of your suggestions and am really enjoying hearing new ones. Please keep them coming!
I'll maintain this top post to include which projects I've finished, which I've started (and their progress) and which are in the pipeline.
Finished and posted to techneesh.com:
- Hybrid portrait//landscape dock (iExitus,
- Custom engraving (txkorm,
- Extra colors (-FuRBz-,
- Brass Knuckles Case (Se23, baghera1979,
- Bumper Case (thanks, ruvort)
In the pipeline (priority-ordered, approximately):
- Brass Knuckles 2.0 (with holes for charging/buttons, top cover for aesthetics, smaller finger holes, rounded edges)
- Dock for Otterbox Commuter Case
- Tobacco Case (not xda related, but xda member requested - will double as a microSD holder
- Bumper Case 2.0
- Dock for Hyperion Extended Battery
- Variable/adjustable dock for other cases
- Modular Dock (specs are not yet solidified. perhaps it will have a connection for an adapter to attach to your car, your bike, etc. Perhaps for preexisting docks like the iHome. Post your thoughts!) (tghockey07,
- HDMI//USB Host Dock
- Your next suggestion
Sorry if I didn't include you I got cut off bc I'm currently boarding a plane
*********************
Just upgraded from my bionic to this sweet phone & ordered the 4200 mah extended w/nfc from amazon for $19.
I made a custom car dock and docking station for the bionic- I was going to integrate HDMI & a usb hub (kind of like this ultrabook docking station) so ppl could use Motorola's Webtop Software more easily... but the # of ppl w/Bionics seems to have diminished extensively.
Anyway, I'm wondering if folks have any dreams for a sgs3 accessory that they'd like to exist.
I want the Mugen dock w/HDMI but it looks like it's out of stock until September... so I may design one myself. lmk any thoughts!
Triskite said:
Just upgraded from my bionic to this sweet phone & ordered the 4200 mah extended w/nfc from amazon for $19.
I made a custom car dock and docking station for the bionic- I was going to integrate HDMI & a usb hub (kind of like this ultrabook docking station) so ppl could use Motorola's Webtop Software more easily... but the # of ppl w/Bionics seems to have diminished extensively.
Anyway, I'm wondering if folks have any dreams for a sgs3 accessory that they'd like to exist.
I want the Mugen dock w/HDMI but it looks like it's out of stock until September... so I may design one myself. lmk any thoughts!
Click to expand...
Click to collapse
O_O man that printer is just insane. I've seen one in action and in some cases they have them in stores where you can just go an pay a certain amount for the object your printing
3D printers are amazing, and have really come down in price. I remember the first laser printers were in the $5000 and up range... ($5000 on the lower end as I recall)
And now, you can print in 3D ......... soooo cool.
So how would this work if you printed something for me? Not sure what yet, but I'm sure I could think of something that I've had in mind
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Araltd said:
3D printers are amazing, and have really come down in price. I remember the first laser printers were in the $5000 and up range... ($5000 on the lower end as I recall)
And now, you can print in 3D ......... soooo cool.
Click to expand...
Click to collapse
O_O dafuq am i the only one never heard of a 3D printer...?!
i'd like to have a cover with a 3d unishark on it!!!!!
Sent from my GT-I9300 using xda premium
Can you print a phone back?
Sent from my Samsung Galaxy S3 with XDA Premium
Awesome. One day I WILL have to buy/build a 3D printer, but they're still currently either way too expensive, or way too janky (MakerBot). And then one day a little further down the road: true desktop molecular manufacturing for everyone (nanotechnology).
In any case, here's something I'd definitely design and print for my phone if I had a 3D printer: End caps and/or snap-on housings for my right-angle 3.5mm stereo cable AND my right-angle micro USB cable. Why? Because I often have both plugged in and it's a pain to comfortably hold my phone in landscape mode while gaming with the nubs of each cable connector jamming into my hands. Would much rather have something with more surface area covering 'em. (KICKSTARTER?! $$$ )
GamerMYJ said:
Can you print a phone back?
Sent from my Samsung Galaxy S3 with XDA Premium
Click to expand...
Click to collapse
if you give him the 3d geometry file he can print it providing the overhangs are not too bad or it may have to be done in multiple parts.
A D&D Character holding a White Galaxy S III
Triskite said:
Just upgraded from my bionic to this sweet phone & ordered the 4200 mah extended w/nfc from amazon for $19.
I made a custom car dock and docking station for the bionic- I was going to integrate HDMI & a usb hub (kind of like this ultrabook docking station) so ppl could use Motorola's Webtop Software more easily... but the # of ppl w/Bionics seems to have diminished extensively.
Anyway, I'm wondering if folks have any dreams for a sgs3 accessory that they'd like to exist.
I want the Mugen dock w/HDMI but it looks like it's out of stock until September... so I may design one myself. lmk any thoughts!
Click to expand...
Click to collapse
I would love a docking station for this beast.
which 3d printer did you get? I'm pricing a few out right now as well if anyone has any pointers...
I desperately want a 3D printer. So many ideas in this thick skull. lol
You should do the inductive charging mod for your phone with the Pre back cover and fabricate a car mount for the S3 with a slot to slide a touchstone into it.
Oh yeah, I'd want one. I'm hoping for something similar when Samsung eventually gets around to releasing their official inductive charging kit unlike the Verizon only one that Big Red just released.
That's a really nice docking station for the Moto btw.
Responses for all!
baghera1979 said:
So how would this work if you printed something for me? Not sure what yet, but I'm sure I could think of something that I've had in mind
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well if it's something that I think sounds cool I would probably just make it and send you one for free- the material isn't exactly cheap but it's definitely not expensive, either. The design time sometimes takes a while (2-10 hours), though, depending what it is. But yeah just throw down some ideas.
I'm also up to do custom orders for relatively cheap (~$20/hr design time, $3 per ounce printed). You can see some stuff I've done here, here, and here.
GamerMYJ said:
Can you print a phone back?
Sent from my Samsung Galaxy S3 with XDA Premium
Click to expand...
Click to collapse
After I hacked my bionic for wireless charging I tried designing part of a phone back (my first print + first design ever, so it looks terrible). Even now that I'm pretty good with the printer & designing things, I don't think it has quite the precision for the fine interlocking mechanism required for the phone back to snap to the phone.
Also, you can see the fine bead of the print so it doesn't look as smooth as china-factory-printed-plastic. (see photo from first post) - so it's better for docks and things like that.
zmore said:
Awesome. One day I WILL have to buy/build a 3D printer, but they're still currently either way too expensive, or way too janky (MakerBot). And then one day a little further down the road: true desktop molecular manufacturing for everyone (nanotechnology).
In any case, here's something I'd definitely design and print for my phone if I had a 3D printer: End caps and/or snap-on housings for my right-angle 3.5mm stereo cable AND my right-angle micro USB cable. Why? Because I often have both plugged in and it's a pain to comfortably hold my phone in landscape mode while gaming with the nubs of each cable connector jamming into my hands. Would much rather have something with more surface area covering 'em. (KICKSTARTER?! $$$ )
Click to expand...
Click to collapse
The makerbot replicator has worked extremely well for me! ($1700). It will do 50+ prints without an issue, and until last week the only fixes I had to do were replacing the tape on the platform and cleaning out the extruder's motor. (last week the motherboard blew, but they immediately shipped me a new one free of charge, and now I'm running again).
OK so let me get this right - you have right angle cables and you'd like something to snap onto the phone to essentially cover both cables so it is
a) more comfortable to hold in landscape
b) protects the jacks from damage
is that about right? or do you want it to snap onto the cables themselves
bdangol said:
if you give him the 3d geometry file he can print it providing the overhangs are not too bad or it may have to be done in multiple parts.
Click to expand...
Click to collapse
Yes I can print most things, even if there's an overhang (it just requires wasting plastic to print support material). Creating a design is pretty easy in Google's (actually Trimble just bought it) free program Sketchup. You can send me the file or an STL exported from any other 3d modeling software.
txkorm said:
I would love a docking station for this beast.
Click to expand...
Click to collapse
What kind of docking station? Power only? HDMI too? Landscape? Vertical? How many folks would also be interested?
Darmokk said:
which 3d printer did you get? I'm pricing a few out right now as well if anyone has any pointers...
Click to expand...
Click to collapse
I got the Makerbot Replicator for the customer support. With relatively premature technology, I think it's worth it to spend a few bucks extra to get awesome support. They answer requests on weekends and will replace any broken parts promptly & free of charge.
However, I would probably try out the Solidoodle, as it is super cheap and looks good. I do feel bad supporting the company as the founder used to work at Makerbot and literally just stole their business model.
msgnyc said:
I desperately want a 3D printer. So many ideas in this thick skull. lol
You should do the inductive charging mod for your phone with the Pre back cover and fabricate a car mount for the S3 with a slot to slide a touchstone into it.
Oh yeah, I'd want one. I'm hoping for something similar when Samsung eventually gets around to releasing their official inductive charging kit unlike the Verizon only one that Big Red just released.
That's a really nice docking station for the Moto btw.
Click to expand...
Click to collapse
Thanks man. You must have seen my other post where I hacked my phone previously for wireless charging?
Not really sure I see the value to it being wireless charging if it's gonna stay stationary in a navigation dock, though? Would it be for device flexibility (so I wouldn't have to redesign it when I get a new phone)?
I'd like a dock that accepts the phone in a case and also works in landscape
Sent from my GT-I9300 using xda app-developers app
Actually didnt know about your previous mod lol.
Was more or less just thinkin aloud (or in text i should say) about a type of of car dock Id like to see for this and future devices. Im a little tired of buying 2-3 new docks (home, car, office) everytime I get a new phone in all honesty.
Would love for a slim universal car dock with inductive charging. Cable can be pulled from the inductive charging pad/touchstone for devices that require being physically plugged in. Makes things simple. Just get in the car, put the device in the dock quickly without worrying about fumbling wires or which side is your port on etc. When you get out just grab the phone. no worrying about wires, bending the usb connector cause you pulled at a wierd angle etc. you know?
Just figured the touchstone + mod would be a nice cheap base to start with for concepting over a $100ish inductive pad. Maybe even stick a laminated rewritable nfc tag in the center with a nice logo on it to program for carmode/ nav/ music or whatever as soon as you dock it. Maybe even make the dock itself detachable and usable as a desktop dock aswell... Ok ok lemme pause my brain for a lil while. I can keep going on and on about this stuff... lol
I am a mechanical engineer and do alot of 3D work in solidworks. I can sketch things up in 3D if people have an idea.
Could the OP use solidworks or step files to automatically print these? I would really like it to design docks and stand if I know the gap margibs from this markerbot
Sent from my GT-I9300 using xda premium
htcsnap93 said:
I am a mechanical engineer and do alot of 3D work in solidworks. I can sketch things up in 3D if people have an idea.
Could the OP use solidworks or step files to automatically print these? I would really like it to design docks and stand if I know the gap margibs from this markerbot
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I have an idea for a case for the sgh-i747. Just a simple 2 piece snap together case. Nothing fancy. Would be nice to see how that material holds up to some of the others I have.
I guess any clamshell style case would work as a template if you could do that and send it it to OP. I have looked for 3d dimensions for them and can't find anything for it.
Thank you
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
baghera1979 said:
I have an idea for a case for the sgh-i747. Just a simple 2 piece snap together case. Nothing fancy. Would be nice to see how that material holds up to some of the others I have.
I guess any clamshell style case would work as a template if you could do that and send it it to OP. I have looked for 3d dimensions for them and can't find anything for it.
Thank you
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Could you post some links or pics, in private or here of what you mean with clammshell? Dimensions i will get from my own device.
Sent from my GT-I9300 using xda premium
Think you could make a stand for me? I just need one that my phone could sit horizontally, and I'd just plug it in to my MHL adapter. How much would that cost?
Sent from my Samsung Galaxy S3 with XDA Premium