Hi,
Just purchased a TP2 with a cracked digitizer. I also have the replacement. I've done a bit of research, and it looks like a ton of steps. I'm pretty confident I can do it, so all I'm really looking for is some tips. Any surprises I might see that may not have been covered in this guide? This is what I have so far:
http://translate.google.co.uk/trans...ka/htc_touch_pro2/&sl=ru&tl=en&hl=en&ie=UTF-8
how did you conclude that your digitizer is cracked?
The LCD is fine. It's the top layer of plastic that is cracked. I haven't received the phone yet, but I inspected it, and that's what I concluded. The person who sold it to me is including a replacement part, but I know I'm looking at a lengthy process to dismantle the device.
Do you have to take apart the entire phone just to change the digitizer? I thought you could just hook something underneath the corner and pry it out.
It seems like such a drag if you have to take the whole phone apart to change an exterior item.
Man you're in for a world of hurt and frustration... Easier to just purchase and replace the LCD and digitizer together...
But hey, good luck.....
have you managed to replace the digitizer only? if its such a mission why are so many people selling them on ebay? a scam maby lol?
i too am interested in your results, just now bought a cracked LCD htc touch pro 2 for $100, touching the screen works, except that the phone is stuck in head-set mode and can't seem to get out of it. also, i want to replace the lcd and use the phone myself. can you pls post your success/educational steps which you followed. also, where did you buy the replacement LCD? how much ? pls help.
ultramag69 said:
Man you're in for a world of hurt and frustration... Easier to just purchase and replace the LCD and digitizer together...
But hey, good luck.....
Click to expand...
Click to collapse
Totally agree here. From what I have read you dont want to mess around with trying to pry the current digitizer off and then reapply a new one on. It's a HUGE pain in the ass. Just purchase a replacement LCD screen/digitizer combo and i's apparently super easy to swap out.
I've taken apart tons of phones, I'm currently waiting on a digitizer to replace for my TP2. If you search this forum you will find instructions how to do it.
While waiting I've been reviewing the instructions.
As always the hardest part is putting it back together.
The only thing I can recommend to you is to don't worry about replacing it. Take pictures with a digital camera as you go so you can know how to put it back together.
Hopefully I will get mine by this weekend. It is for a T-Mobile TP2 and the only shop to have one available was in Hong Kong.
Good luck.
Redman0570 said:
I've taken apart tons of phones, I'm currently waiting on a digitizer to replace for my TP2. If you search this forum you will find instructions how to do it.
While waiting I've been reviewing the instructions.
As always the hardest part is putting it back together.
The only thing I can recommend to you is to don't worry about replacing it. Take pictures with a digital camera as you go so you can know how to put it back together.
Hopefully I will get mine by this weekend. It is for a T-Mobile TP2 and the only shop to have one available was in Hong Kong.
Good luck.
Click to expand...
Click to collapse
Hi, can u post how you go with this e.g. is it easy enough to seperate the lcd and touchscreen. Maby a few pics as well if you can.
Cheers
It can be done but it requires ALOT of patience. Take it slowly and try not to leaver against the LCD in anyway. If you do break the screen when replacing it a replacement isn't expensive.
I replaced the digitizer twice. Taking the phone apart and assembling it back is difficult only when you do it for the first time. Once you know what's going on it just takes some time and precision. The REALLY tough part when replacing JUST the digitizer is putting the lcd and digitizer together without any dust or fingerprints in between. I ended up with dusting and vacuuming the room, putting some super-clean brand new plastic bags around the workplace and putting the cold shower on. Then using super-clean glass polishing microfibre cloth and anti-static glass cleaning liquid under really good lamp I managed to get both parts 100% clean and put them back together. Don't forget latex gloves (the ones that leave no marks) - fingerprints are hundred times worse than dust to get rid of. I have no idea how long did it really take but when I finished my back hurt like hell and water was dripping from the ceiling
Separating lcd and digitizer is not too hard. It was easiest when it was still attached to the bezel. I just pried it out applying easy, firm pressure and taking my time. Try not to damage the sticky layer on the edges or get it excessively dirty - it'll make your life easier later.
I hope it goes easier for you. Gud luck!
EDIT: Make sure that lcd is positioned 100% correctly (there is 1 or 2mm space to move it around). It is a very unpleasant surprise to put the phone back together just to find out that some top or bottom pixel lines are permanently invisible (The Voice of True Experience speaks here:/). And generally - keep the place around you tidy - maybe some containers for screws, parts, tools and that sort of stuff. I am not naturally anal enough to start from this point but found out in the process that this sort of job gets extremely frustrating and exhausting when you get confused, start losing parts etc.
It is major hurt! The TP2 is really not user serviceable! Anyway after reading all instructions I still screwed it up. I should have sent it in to HTC. I would not recommend changing the digitizer on your own.
Everything went well until it came to removing the LCD & replacing the digitizer. I cut the speaker cable, and the LCD just came apart. Luckily I have another LCD, looking for a speaker cable now.
has anyone found any places that sell the lcd and digitizer together for the T-Mobile TP2?
Thanks to these instructions I was able to replace the broken digitizer (glass) on my TP2. Unfortunately the Russian instructions stop short of replacing the glass.
Tools required: T5 torx mini screwdriver, letter opener, mini philips, a mini straight screwdriver and I found a very mini (1mm ) straight screwdriver handy for getthing the keyboard and screen back loose. The letter openner and two straight screwdrivers are only for prying
Here is what I did from the last spot on the Russian instructions: (yes you have to do every step)
Note: Be very careful removing the ribbon taped to the back of the LCD. You have to pry the speaker out ot the case up at the top; don't attempt to remove it by pulling on the ribbon. Once the speaker is loose (it's attached to the riboon, you are ok to remove it.
1. Take a small straight screwdriver and pry all around the LCD (metal back with handwriting on it in the last photo.) There are plastic tabs all around it centering it. You can pry gently against them. The LCD is only adhered with a small gasket around the edge of the glass. It is not glued to the screen as was posted by someone else. It comes out fairly easily.
2. Remove the black tape holding down the ribbon connected to the digitizer. I wasn't able to save the tape but not a big deal. Below the tape is one of three screws holding the buttons on. Remove those three screws.
3. Now you should be able to remove the digitizer. Go slow starting at the bottom. It is glued all around at heavily glued at the top. I had the pry the top away with small flat screwdriver and a letter opener. Go slowly and eventually it will release. At the top of the glass is the speaker for your ear. It will likely come off with the glass. Remove it and return it to the now empty case centering it in top.
4. Using gloves to prevent prints remove the protective film form your new digitizer. There is a lot of static generated when you do this so keep it away from everything for a minute while it neutralizes. Then place the digitizer in from the top, feed the ribbon through the slot and press the plastic all the way around.
5. Replace the buttons and the screws that retain them.
6. Replace the LCD; you can't screw it up the plastic tabs center the LCD. Just make sure the ribbon is at the bottom.
7. Reverse the instructions in the Russian link at the beginning of the post.
All told it took one hour the first time. I got it all together and then screen didn't light it. I had trouble reconnecting the screen ribbon during assembly so I figured the problem was there. I took the phone apart (to the end of the Russian instructions) and reinserted the screen ribbon into the connecter and then reassembled the phone. It took 10 min to disassemble and reassemble the phone the second time although I didn't have to take apart the screen.
So that's it. It cost me $22.00 for a new digitizer and $10.00 shipping, which is a lot better than a new phone if you don't have insurance and the phone looks like new. If you look very hard you can make out one tiny speck of dust under the glass but it's barely visible; much better than looking at the large V shaped crack I had before.
Hello!
I ordered (and received) a screen AND a digitizer. But there's a thin scotch tape that make the screen+digitizer (in one piece) get stick to the phone. OK, I teared it off.
But, how can I replace this scotch tape??? Much less of 1 mm thick, it seems to be made of foam...
Anyone can help me???????????
Please....
Coucou !
Is there anybody out there?
(Pink Floyd, The Wall, 1979 )
I was sent a Digitizer from Ebay (without LCD). Just for everyone elses benefit, there is no way you can remove the digitizer from the LCD Screen. It's glued down. Maybe it wasn't the case with the older ones, but mine can not be separated, no way!
Taking the phone apart is not too hard, the video instructions are pretty good, but seriously, forget trying to replace the digitizer only.
Here is the video:
http://www.youtube.com/watch?v=MrTRPTmoxpw&feature=player_embedded
Cheers, Mal.
If it has the same construction as the HD2, you can put the LCD + digitizer in the oven for 5 minutes at 50 degrees celcius. This was shown in instructions by HTC. Then you can seperate them.
Maybe, but my LCD was glued across the whole screen not just the edges. I'd suggest only buying the Digitizer/LCD combo if you want to do this yourself. If you buy both (as a single piece) the job would be pretty easy.
***Need help*** with broken/ cracked screen on my vibrant. Anyone here know how to replace and where to buy a screen. Touchscreen still works fine, but I have 2 vertical cracks down the phone and 2 across horizontally. Please help.
Vibrant ROOTED and on TOXIC CRACK
try repairs universe
also there is a youtube video on how to do it
I also cracked mine some time ago. The kits sold on ebay is fine. It includes amoled+gorilla glass, because amoled is so thin that it is impossible to sell it independently. There are several videos on youtube. It is not a hard replacement, I'm sure you can do it yourself. Just disassemble it and after removing mainboard, you remove data bus of the screen, then connect the new screen's data bus. Mine works perfect
I replaced my broken screen but it is not easy. The youtube videos make it look easier than it is. Besides a 2 mm phillips and a pry tool, you will need tweezers, strong reading glasses, something like rubber cement because the screen is really just glued in there, good lighting, and a lot of patience. I have worked on laptops and this is harder.
Once you figure out that the front bezel isn't designed to hold the screen in, it becomes a bit less frustrating but it took me about three hours and lots of scraping of little pieces of broken screen glass out of the front bezel frame. It's back together but I must have gotten the microphone in backwards because it doesn't work, or maybe a wire pulled off the mic. The supplemental menu button in the lower left hand corner does not work either. .
Do yourself a favor and buy a new phone, the AMOLED+Gorilla glass is like 75% of the total cost. Gorilla glass is cheap about $25 but it is extremly hard to replace. at least it is very difficult to remove without inflicting any damage to the phone or the AMOLED. If you go for it. you can use heat to soften the adhesive but be careful that AMOLED is extremly fragile on its own and the touch screen can get easily burned.
After looking on Global Direct, it seems the eBay screen replacement kits don't include everything you need. The phone originally uses die cut adhesive stickers instead of glue to keep the screen in. Screens can be had for $100-$120, less than the phone, but the lower button - mic assembly flex-pcb seems prone to being screwed up 'cause my lower left button and mic won't work now. My screen was pretty well crumbled especially around the lower buttons and perhaps it was just unavoidable that I damaged the lower button mic pcb trying to scrape the glass off.. A new pcb costs around $40 and that is getting up to the price of the phone. Still, being able to successfully disassemble the phone and know how it works could be useful. Some people might be clever enough to upgrade stock parts like putting in a better mic, arctic-silver-epoxying a thin sheet heatsink to the cpu to aid in ocing, etc. The new screen did not break and looks pristine, though, it's just that I f**ked up something else putting it in.
So my screen got busted, Long story short, if your glass cracks, don't put off the $15 replacement cost, because eventually it'll crack the LCD also. I sourced a Sprint S3 LCD, mint condition, for less than the cost of the insurance deductable.
I do a lot of DIY repairs so this sort of thing is normal for me, but be advised this isn't for the squeamish or for someone who doesn't have a steady hand. You have to mill/grind/wish away aluminum, sometimes to within a thousandth, of pcb flex cable. One blink and you could ruin the whole thing. If you go too deep, you'll cut into the LCD and its assembly. So.. be warned.
This isn't a guide, just a picture to show you what I did. I compared the two subframes for awhile and marked what I needed to grind away. I found out later there was some more I needed to grind, so I eventually just ground away a lot of the mass just so I didn't have to keep checking fitment.
Once fitment was just right I put new thermal tape in place of the stuff that got damaged, and assembled everything. It booted up like a charm. The rear case doesn't fit as well, there's a plastic difference between it and the Sprint rear case. I just ground away the plastic to make it fit. A Sprint rear case would fit fine.
The metal I ground away is the 'shiny' stuff, but to be specific, I highlighted it in a thin pink line. Tools used were a blow gun and a dremel with a cutting disc and a stone grinding point. I used painter's tape to mask off areas I didn't want crud going in, specifically the cable connectors and front camera and LED port. Also eye and ear protection (earbuds with music of course). Took about 2 hours.
For this particular swap you will be left over with one screw. The black screw at the bottom which holds the pcb to the frame on the AT&T model doesn't exist on the Sprint model. I didn't feel like drilling/tapping, so I just left it out.
So if you need an LCD and happen upon one from another brand for less, you might just be in luck. Hope this helps someone, or gives a good 5 minute read on a lunch break.
SM-P600 series cracked screen repair.
I have a badly cracked screen on my SM-P600 and have ordered the complete LCD + digitizer to do the repair - having watched how difficult is was to clean a phone with LCD glued to the screen - and it also seems that there is nobody willing to take on the job in the UK.
The screen and all the internals extract from the front screen side of the unit leaving a "carapace" behind.
Bought LCD here -> http://www.ebay.co.uk/itm/LCD-Screen...item3ce14e2f51
Tools used :- Old credit cards cut to suit (tools had not arrived) and watchmakers cross point screwdriver. Hair-dryer. Stanley knife (Utility knife)
I decided not to video my repair as it would have taken days - being in my 70s and not too clever with the eyes, meaning I have to keep changing spectacles for everything and I have a dreadful habit of removing an item or using a tool, putting it down and spending the next few minutes looking for it - you've guessed it - changing specs!
There is a perfectly good strip down on Utube here :-
https://www.youtube.com/watch?v=zOzrRu8PB2Y many thanks to Gorepair.de for the video - and that's the easy part.
After removing all the gubbins you are left with the LCD + digitizer attached to a grey frame by means of thin double sided sticky tape. I heated the peripheral of the screen with the wife's hair dryer and very carefully removed the cracked screen. By doing this I was able to re-use the tape on the new screen after carefully examining it for any glass splinters etc.. I also placed greenhouse tape - thicker & wider than Sellotape - over the screen before dismantling so that I was not showered with glass splinters. Another tip is a piece of sellotape over the power & volume buttons to keep them in place - they may be held in by other means but it's belt & braces, no harm there.
Before replacing the screen in the frame remember to replace the HOME button as I found out the tape is indeed very sticky and it was a bugger separating screen from frame to insert the button which I had, of course, forgotten to put back in! Should have Sellotaped it in new screen immediately on removal from the damaged one! There is also a short golden coloured multi tape that needs to be fed though the frame.
Now it is just a matter of reversing the strip down procedure and Fred is your Aunt Fanny's best friend!
The unit did work afterward despite my repair. It took me about three & an half hours including changing specs and lookin for misplaced items, so I'm sure less than two hours for a good sighted person that is "compus mentis" :¬)
It is not as daunting as it may first seem!
has anybody ordered and replaced the LCD screen on this phone?
i managed to crack mine after some month of abuse. anybody recommend an lcd screen assembly from ebay?
Yes. I have replaced a few as I work in a mobile phone repair shop.
Not sure if I'm allowed to post eBay links here but anyway here it is:
http://www.ebay.com.au/itm/Huawei-P...948322?hash=item1a172c98a2:g:jcoAAOSw6WdXidIF
The client actually bring the screen for me to replace his broken screen, came with screen and frame pre-assembled like this. While I have ordered one for a similar model for the Huawei Ascend G8 a few times it's pretty simple and hassle free when you buy it pre-assembled like that.
I could buy without frame but you get the hassle of adding adhesive manually which comes with the risk of the screen either not sitting on properly or pushing up because the adhesive was too weak or not applied properly. I've done a few G8's with and without frame, worked pretty well in my experience.
Note that the huawei P9 has two pentalobe screws on the bottom like the iPhones do and you will need to take the sim card / sd card tray out before opening it up. The whole metal back cover pretty much unclips from the screen frame. Do check iFixit disassembly guides on how to do so. Most of it is unplugging cables and unclipping stuff, the battery is a bit tricky the adhesive is usually strong for them. You gotta pull the battery adhesive tab if there is one and most likely the battery will still be stuck to the housing even with it removed because there is even more adhesive that is separate from that tab (pry carefully if you intend to do so of course, LCD cable runs under the battery if I remember correctly).
You can also buy cheaper from here but the quality as you can see is quite lower: http://www.eddogo.com/lcd-display-t...-with-frame-for-huawei-p9-eva-al00-black.html
As always make sure to match it up with model number.
https://www.youtube.com/watch?v=jDPRtzjqSlo