Related
helpp i try to load haret and i get a white flashing screen ... anyone have a fix?
you did not supply much information to help figure it out but go here nice little tutorial on how to get it working. Have Fun its pretty kool
http://forum.ppcgeeks.com/showthread.php?t=79798
Flashing White Screen
This is happening because you have the incorrect panel type in your default.txt... not sure which provider you have, but mine is Sprint and my panel type needs to be set to 3. It's gonna be 1, 2, or 3. Good Luck
ok i got it to LOAD but now im in the hero and htc loop
right now im trying the hero ui not using android at the moment
ok i got it to load... and i got android [the one g1 has] soo is there any way to change the resolution so that it fits?? because andoid doesnt seem to fit
im using the super hero build and it is flawless with the vogue. no more crashes for me and all is working. i cant believe we have hero on our vogues already
incubus26jc said:
im using the super hero build and it is flawless with the vogue. no more crashes for me and all is working. i cant believe we have hero on our vogues already
Click to expand...
Click to collapse
super hero build? does it run FULL speed? i want it lol where do i get it?
incubus26jc said:
im using the super hero build and it is flawless with the vogue. no more crashes for me and all is working. i cant believe we have hero on our vogues already
Click to expand...
Click to collapse
I do as well but for me the moment i boot into harat I get a minor blur the the whole thing i could never figure that out.
jdm4life said:
super hero build? does it run FULL speed? i want it lol where do i get it?
Click to expand...
Click to collapse
looks like you didnt read the post i gave you...... Atleast try lol
Super Hero can be found within this post
http://forum.ppcgeeks.com/showthread.php?t=79798
theoneownz said:
looks like you didnt read the post i gave you...... Atleast try lol
Super Hero can be found within this post
http://forum.ppcgeeks.com/showthread.php?t=79798
Click to expand...
Click to collapse
i dont see a super hero anything.. jus hero... can you send me a link to the one your using? like can u upload it somewhere?
what i did was download android 1.5, then downloaded super hero build and replaced files in android. then replaced again with the jackshero ski1.6. this method should give you all the files you need and also be the most stable. for me anyway. you will want to extract the resources.zip. it will make a media directory on the root of storage. then put everything else on the root of storage outside of media folder. then simply run heret.exe.
Projects Homepage
http://code.google.com/p/vogue-android/
Download Page (Looks like that change it a lot)
http://code.google.com/p/vogue-android/downloads/list
Super Hero Build
http://code.google.com/p/vogue-android/downloads/detail?name=SuperHero081609.zip
jtalemal Page of all uploaded Projects
http://code.google.com/u/jtalemal/updates
Hope this helps enjoy friends
Edit your default.txt
If you want a different LCD density, add an option lcd.density=xxx after the ppp options. 160 is default, 128 was the old "hiRes". Google Maps only works at 160.
If you don't want it to connect to data, add an option ppp.nostart=1.
I dont know if everyone has this issue or only myself....
My screen seems blurry, especially on linux boot, I attempted the lcd density adjusment as per above but can not seem to get it as clear as it used to be when massey started the project.
anyone have idea's? Am I possibly making a mistake? is everyone running into the same results?
all the sudden i keep going back to the htc logo screen and reloading everything all the time
incubus26jc said:
what i did was download android 1.5, then downloaded super hero build and replaced files in android. then replaced again with the jackshero ski1.6. this method should give you all the files you need and also be the most stable. for me anyway. you will want to extract the resources.zip. it will make a media directory on the root of storage. then put everything else on the root of storage outside of media folder. then simply run heret.exe.
Click to expand...
Click to collapse
i got it running but i get message not sent wen i send a text ... but it actually does send
that is a bug they are trying to work out
incubus26jc said:
that is a bug they are trying to work out
Click to expand...
Click to collapse
hey can u tell how to install that pointui on my xv6900 i installed the cab file and nothing happen im running NFSFAN wm6.5 v14
corypaul said:
hey can u tell how to install that pointui on my xv6900 i installed the cab file and nothing happen im running NFSFAN wm6.5 v14
Click to expand...
Click to collapse
you have to have the latest pointui installed. then enable it in today settings and then after it boots up disable it. then install the point sense suite cab. re enbable pointui in today settings. then switch themes in the pointui settings to point sense.
http://www.pointui.com/products/home-2 download point ui first and enable it in today settings let it boot up and then disable it
Do you install it to main memory? Seems like too huge for main?
ive been testing this new Xrom build for a few hours and it has hero theme with clock/weather widgets and runs very smoth and fast. i recommend trying it.
all you should need is the latest mission package zip (includes android 1.5)
http://code.google.com/p/vogue-andr...e=mssmisonpackage.zip&can=2&q=&sort=-uploaded
then replace the system sqsh with the one below
http://code.google.com/p/vogue-andr...system-xrom1.4r3.sqsh&can=2&q=&sort=-uploaded
make sure to put everything on the root of the storage card
then run haret exe
you can download as many free apps and widgets as you want from the marketplace app. Also you can add as many pages as you want to the UI.
incubus26jc said:
ive been testing this new Xrom build for a few hours and it has hero theme with clock/weather widgets and runs very smoth and fast. i recommend trying it.
all you should need is the latest mission package zip (includes android 1.5)
http://code.google.com/p/vogue-andr...e=mssmisonpackage.zip&can=2&q=&sort=-uploaded
then replace the system sqsh with the one below
http://code.google.com/p/vogue-andr...system-xrom1.4r3.sqsh&can=2&q=&sort=-uploaded
make sure to put everything on the root of the storage card
then run haret exe
you can download as many free apps and widgets as you want from the marketplace app. Also you can add as many pages as you want to the UI.
Click to expand...
Click to collapse
thanks im trying it out now.u dnt have to edit the default.txt. right?
edit: i tried it 1st i had to edit the default.txt. [already had one from a previous android and it worked fine]
but now its saying unable to mount data or something like that...
please help
Is Note 8.0 is too new for some app compatibility?
Google+ , Goggle, Up...
Anyone could give suggestion?
Can you be more specific on your problems? All the Google apps I've tried, including Google+, work just fine for me.
Sent from my GT-N5110 using xda premium
Juvenall said:
Can you be more specific on your problems? All the Google apps I've tried, including Google+, work just fine for me.
Sent from my GT-N5110 using xda premium
Click to expand...
Click to collapse
I use the device customized for China, without any Google service and apps preloaded. I install by manually and want to install G+ in play, but failed. Another try is copy the apk file form another Note 2, also failed.
all work for me fine
Google+ workes fine with me
Could you please send me the apk
?
Sent from my GT-N5100 using xda app-developers app
Ya, That's true. Note 8 is working perfectly fine with Google+.
xmarsman said:
I use the device customized for China, without any Google service and apps preloaded. I install by manually and want to install G+ in play, but failed. Another try is copy the apk file form another Note 2, also failed.
Click to expand...
Click to collapse
Note 2? What? Did you mean Note 8? it all works just fine.
xmarsman said:
Is Note 8.0 is too new for some app compatibility?
Google+ , Goggle, Up...
Anyone could give suggestion?
Click to expand...
Click to collapse
The Chinese stock ROM does NOT support apps that depend on google service. So google+, gmail, drive... all NOT available in that ROM.
You can flash a Taiwan version stock ROM or ROM for other countries. There are some known issues if you just flash the gapps to the Chinese stock ROM, eg, google map won't tell where you are...
Chinese Note 8
Hi,
I'm also stuck with the Mainland China Version of the Note 8, besides being not able to use google.play and other google stuff it seems to be a bit slow on lot of other things.
I tried to replace the chinese version with other ROM's , but sofar it alsways failed when it came to loading/writing modem.bin.
Luckily sofar I was able to recover the unit via Kies.
What I did :
1.download of another stock rom i.e. german
2. install Odin 3 , run it as admin
3. connect the Note to an Windows 7 pc , USB driver works
4. follow the various instructions found here
5. also tried the Note 8 toolkit
6. everything looks fine until it reaches the modem.bin file.
7. failed .....
Also tried it with rooting the Note 8 first via the toolkit
For good order sake pls note the following : Model Number GT-N5100
Android Version 4.1.2
Baseband Version N5100ZCBMD2
Kernel Version 3.0.31-1087838
Build Number JZO54K.N5100ZCBMD2
Any suggestion what else to do ? Or which Rom to use ?
Tks
Henning
homer276 said:
Hi,
I'm also stuck with the Mainland China Version of the Note 8, besides being not able to use google.play and other google stuff it seems to be a bit slow on lot of other things.
I tried to replace the chinese version with other ROM's , but sofar it alsways failed when it came to loading/writing modem.bin.
Luckily sofar I was able to recover the unit via Kies.
What I did :
1.download of another stock rom i.e. german
2. install Odin 3 , run it as admin
3. connect the Note to an Windows 7 pc , USB driver works
4. follow the various instructions found here
5. also tried the Note 8 toolkit
6. everything looks fine until it reaches the modem.bin file.
7. failed .....
Also tried it with rooting the Note 8 first via the toolkit
For good order sake pls note the following : Model Number GT-N5100
Android Version 4.1.2
Baseband Version N5100ZCBMD2
Kernel Version 3.0.31-1087838
Build Number JZO54K.N5100ZCBMD2
Any suggestion what else to do ? Or which Rom to use ?
Tks
Henning
Click to expand...
Click to collapse
You can try this one. Simply copy it to internal SD and flash it with CWM recovery.
I'm not the owner of this ROM. I think it is based on the rooted ROM published here earlier.
OH... I'm too new to publish a outside link... try use baidu.com and search for " 新欧版rom（奥地利 3 Hutchison通讯）汉化修改版发布！！！" ... Hope this helps...
it works
Hi,
thanks for that tipp. Finally I made it work
Internet access
Hi,
that was a bit premature : the statement it works. Basically it does, however I can't get any data transmission work when not connected to wifi.
Using the phone as a phone is ok, Internet access does not, it says "No network connection available"
With WiFi no problem
Has this something to do with the non chinese Firmware ? Which I would find a bit odd since I never had any problem with importet phones in china sofar.
Anybody has a clue ?
Tks
Henning
My friend's google+ is working fine as well
alicepattinson said:
My friend's google+ is working fine as well
Click to expand...
Click to collapse
Google+ works fine for me as well..
Thanks to developing rom like this so we can use android in bada
I have two question can you guys please solve it?
1.Success to instal CM11 Badadroid v4.3 but problem when ever phone hang or off then after on it back to bada 2. how i can i fix it? i have to use both os on my device? or i can permanent remove bada 2?how?
2.Gapps success to instal but loading loading while i try to open play store..straight forward i cant able to open play store its says no network even i am connected to internet network.
how i fix this?
using wave II
where mistake i have done in installing CM11 Badadroid v4.3
ejazapril said:
Thanks to developing rom like this so we can use android in bada
I have two question can you guys please solve it?
1.Success to instal CM11 Badadroid v4.3 but problem when ever phone hang or off then after on it back to bada 2. how i can i fix it? i have to use both os on my device? or i can permanent remove bada 2?how?
2.Gapps success to instal but loading loading while i try to open play store..straight forward i cant able to open play store its says no network even i am connected to internet network.
how i fix this?
using wave II
where mistake i have done in installing CM11 Badadroid v4.3
Click to expand...
Click to collapse
_____________________________________________________________________________________________________________________
1.Success to instal CM11 Badadroid v4.3 but problem when ever phone hang or off then after on it back to bada 2. how i can i fix it? i have to use both os on my device? or i can permanent remove bada 2?how?
Click to expand...
Click to collapse
BadaDroid v4.3 is dualboot. This means that both bada 2 and Android can run on the same device. It was clearly mentioned in the official post that there is no shutdown provision, and that whether you shut it down or restart it, it will be back to bada 2. You cannot fix it, its up to the developers.
And you cannot remove bada 2 permanently, AFAIK.
Gapps success to instal but loading loading while i try to open play store..straight forward i cant able to open play store its says no network even i am connected to internet network.
Click to expand...
Click to collapse
Did you activate "Mobile Data" ? It worked fine on mine. [Samsung Wave GT-S8500]
Play store was fine too. I even updated it to the latest version, which is 4.8 or something like that. Works fine for me on both wifi, wifi in ad-hoc mode and also on mobile internet.
Stock ROM Elephone P90000_Android_6.0_20160401 (Beta)
Download - https://mega.nz/#!w4BBnKaR!_WU3BeucmEURhgo8VpvspHMVZngL7ctzd29mx6cn2BQ
XDA:DevDB Information
[ROM] Stock ROM Elephone P9000_Android_6.0_20160401_Beta, ROM for the Elephone P9000
Contributors
Jonny
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 20160401
Beta Release Date: 2016-04-04
Created 2016-04-19
Last Updated 2016-04-19
Has someone give this Beta a try?
Trying now, just be aware that flashing WILL completely wipe your phone again... Everything is gone...
Seriously though, how hard is it to NOT wipe everything like, oh i don't know, every other phone out there...
There is not much difference between this and the last OTA update, I have found the fingerprint sensor a little better but even the security patch level says 1 March 2016... Can't say anything about battery life yet, I find it usually takes 3 days for that to settle but I really haven't seen much difference in UI or settings. Most changes must be "under the hood" so to speak... Doesn't help there's no changelog...
Found the case doesn't seem to register being closed easily so it just leaves the phone on even though I have the original case that has the screen cutout for clock and whatnot.
Keyboard still doesn't support swype...
ultramag69 said:
Trying now, just be aware that flashing WILL completely wipe your phone again... Everything is gone...
Seriously though, how hard is it to NOT wipe everything like, oh i don't know, every other phone out there...
There is not much difference between this and the last OTA update, I have found the fingerprint sensor a little better but even the security patch level says 1 March 2016... Can't say anything about battery life yet, I find it usually takes 3 days for that to settle but I really haven't seen much difference in UI or settings. Most changes must be "under the hood" so to speak... Doesn't help there's no changelog...
Found the case doesn't seem to register being closed easily so it just leaves the phone on even though I have the original case that has the screen cutout for clock and whatnot.
Keyboard still doesn't support swype...
Click to expand...
Click to collapse
Untick the userdata.img if you don't want your data to be wiped.
racer290 said:
Has someone give this Beta a try?
Click to expand...
Click to collapse
Been running this for a number of days now, not run into any problems except it was slightly more difficult to root, lot of trial and error but I'm going to post a tutorial on how I rooted it later today.
Jonny said:
Been running this for a number of days now, not run into any problems except it was slightly more difficult to root, lot of trial and error but I'm going to post a tutorial on how I rooted it later today.
Click to expand...
Click to collapse
Correction, someone has already posted the method here >>> http://forum.xda-developers.com/elephone-p9000/how-to/how-to-root-elephone-9000-stock-rom-t3359315
The tutorial in the link above works for this firmware version as well.... could have saved myself a lot of time if I'd read that first lol. For convenience I've put all the files needed in a zip file (link below). Just use SP Flash Tool to flash the recovery, then flash the 2 other zip files from TWRP
ZIP File >>> https://mega.nz/#!IlgxgDhS!r6_OpFYLVv07o025ecJ9rDul2db1KMsoWAlZbabWMxI
trying to flash this but SPTools (5.1520.00) giving me "Error: Initializing scatter file failed. Please check the name of the scatter file which you load is legal" any ideas as to why? I have tried the other rom listed that isn't the BETA and get the same error...
Also, I don't appear to have the Allinone.bin file for the DownloadAgent, can someone please share that too me?
Thanks
Ignore that, I seem to have got it working.
Where do you get these ROMS from? I'm looking for rom version 20160318 for the p9000 lite.
karl0ss said:
trying to flash this but SPTools (5.1520.00) giving me "Error: Initializing scatter file failed. Please check the name of the scatter file which you load is legal" any ideas as to why? I have tried the other rom listed that isn't the BETA and get the same error...
Also, I don't appear to have the Allinone.bin file for the DownloadAgent, can someone please share that too me?
Thanks
Ignore that, I seem to have got it working.
Click to expand...
Click to collapse
use ever latest sp flashtool!
5.1604 or newer for Android 6 and P10 chipset
megthebest said:
use ever latest sp flashtool!
5.1604 or newer for Android 6 and P10 chipset
Click to expand...
Click to collapse
I could only get 5.1604 working, 5.1612 wouldn't work for me at all on Windows 10 in VirtualBox.
This is officiel or not ? and GPS work for you on this rom ? is it based on 20160315 ?
Bradco said:
This is officiel or not ? and GPS work for you on this rom ? is it based on 20160315 ?
Click to expand...
Click to collapse
please read.. is not based on 20160315 .. is a new stock rom 1st of April.. but still in beta stage..
I hear about a new OTA here http://forum.xda-developers.com/elephone-p9000/help/ota-update20160319-t3364691
megthebest said:
please read.. is not based on 20160315 .. is a new stock rom 1st of April.. but still in beta stage..
I hear about a new OTA here http://forum.xda-developers.com/elephone-p9000/help/ota-update20160319-t3364691
Click to expand...
Click to collapse
Ok thanks
I have a Moto Z Play and I want to port some ROMs from Redmi Note 4 which is having the same SoC. The problems I'm getting are:-
1. Device not booting after flashing rom, something is wrong with boot.img porting, there is no updated guide on how to port oreo boot.img, porting with other methods doesn't seem to work.
2. Brotli files can be extracted with a number of steps but the problem is with repacking, I didn't find any guide on how to do this. At last, I just kept the system.new.dat as it as and changed updater-script with the same name but it didn't work and I got "Error 7" in twrp all the time. Is there any way to get back to the conventional way of having a "system" folder in rom zip?
3. In all previous version of Android we need to replace some system files but I didn't find any help for oreo.
If anyone knows how to port roms for oreo please let me know. At some point, after trying too hard I thought it's better to compile one but that requires a fast internet and an 8 core system at least, porting is the only thing I can do using my laptop.
Manish355 said:
I have a Moto Z Play and I want to port some ROMs from Redmi Note 4 which is having the same SoC. The problems I'm getting are:-
1. Device not booting after flashing rom, something is wrong with boot.img porting, there is no updated guide on how to port oreo boot.img, porting with other methods doesn't seem to work.
2. Brotli files can be extracted with a number of steps but the problem is with repacking, I didn't find any guide on how to do this. At last, I just kept the system.new.dat as it as and changed updater-script with the same name but it didn't work and I got "Error 7" in twrp all the time. Is there any way to get back to the conventional way of having a "system" folder in rom zip?
3. In all previous version of Android we need to replace some system files but I didn't find any help for oreo.
If anyone knows how to port roms for oreo please let me know. At some point, after trying too hard I thought it's better to compile one but that requires a fast internet and an 8 core system at least, porting is the only thing I can do using my laptop.
Click to expand...
Click to collapse
Hey, I'm trying to port a lenovo k4 note rom to my HTC 628 and I have the same problems too. Did you ever figure out how to do this?