Develop Bugs

Artemis WiFi and Belkin N1 Router

@ all,
it might sound a bit surprising, but I dont get my new artemis ( i now own one with wifi !, my hero didnt!),
working with the wireless of my belkin n1 router!
everytime i enter the mac adress into the router, wlan stops alltogether! ( do i need to enter the mac adress?)
entering the normal wpa-psk passwords into wm6.1 vanilla or b&b5, the connection constantly changes between available, but not connecting, and unavailable... even when sitting right next to the router!
any ideas?
help highly appreciated!
greetz
thormdac
news:
got it working for now-- changed wlan channel in rpouter to channel11, which is preset in wm6.1!
is that how its done?
Update:
most of the times the router just kills the wlan function all in all once i try to connect with the artemis!
Need to reboot router to get it running again!
Where am i going wrong?
p.s. no, i aint a novice

I've got the same roblem mate. Not got a clue what to do ?

Had the same issue with a Belkin N router yesterday. Solution I dumped it went down to Maplins and got a Netgear. Plugin and I was away.
Had flashed the rom serveral times (Win 5, 6, 6.1 some of the cooked roms) nothing worked was thinking it was a hardware failure.
Dont' appear to matter how you set the belkin nothing works.
Thou oddly my Exec connects with it just fine.

Azriaphale said:
Solution I dumped it ...
Click to expand...
Click to collapse
Gee, that would for sure make me one unhappy pal!
Anybody around here has another idea!
Possibly some tips on "Must does" ! for connecting via wifi with artemis! Whats with the mac address-thing?!!!
Greetz

To be honest, I've looked at dozens of sites searching for a solution to this issue. Everything from flashing the ROM (Device and router), enter MAC on the router, set a IP address, changing channels, security settings and nothing appear to work with the Belkin N family.
My experience with Belkin has not been good (Tech support has always been first class).
The first router (Cheap 54g) would run for 2 hours then lockup, requiring a reset of both the router and cable modem). Replaced by Belkin after several days talking to tech support.
The second router (Same 54g unit, different Version number) Ran fine until you moved data about, anything downloading above 150k locked the router. Wired connections could do 300k then lock up. Replaced by Belkin.
The third unit (Upgraded to a 2 stick version for free) DOA. Replaced by Belkin
The forth unit (Same 2 stick version) worked data transfers good but would not allow wifi connections other than WEP 64. Firmware update would then WEP 128. Replaced by Belkin.
The Fifth unit (Same 2 stick version, different version) Wifi worked with all settings. However with wifi on all wired connections ran like a 56k modem. Replaced by Belkin.
The sixth unit (Upgraded to the N) Worked fine. Wired connections fine, wifi was a bit hit or miss, two Toshiba laptops connected fine, the Dell laptop never connected. Belkins own N usb dongle also never connected.
My Orbit never connected to any of the Belkins, the Exec did with some and others not.
This issue is not limited to Belkin, if you look about, other makers routers also appear to have this issue.
The cheap Netgear (£35) works just fine for me. Took 5 minutes to setup. Everything in the house connects. I`m happy after 7 months of Belkin issues.

uiuiui,
what a story!
just so we dont get us wrong here: had my n1 now for about 6months, and its running just fine with all my notebooks! - just since trying to connect with my artemis i am running into probs!
A theory of this mornings trials:
any way of changing the preconfigured broadcast channel 11 within the artemis? --- seems to me the channelchanging is causing the hangups!
will try setting the router to channel 11 and see what happens!
greetz

Ive set channel to 6 in the N router, the Art/Orbit will find it and go though the motions of connecting and make it unavailable (our problem with N routers). The Network setting will show its on ch6 (if you can there before it becomes unavailable). Then goes to ch11.
I think the Art/Orbit just runs in sequence though the channels, if it gets a lock it uses that channel. If not it moves on, I think we just see ch11 because its the last ch available in the scan.
Have just played with the Netgear channels and the Art/Orbit connects with every channel, the Network setting page shows the correct channel that the routers broadcasting.
So it don't appear that the channel is hard coded to the Art/Orbit.

Ok stumbled across this thread a little too late. Our Linksys wrt54g was not able to handle the kind of data we were transferring and moved to a Belkin_N1 router, I have an HTC Wizard but same symptoms, if I try to connect to Belkin I can not connect to anything WIFI before a soft-reset, I get prompted for key fine once and during connection something messes up the wifi radio, I am not sure if its a software or hardware issue but got the same issue with an SMC router, while my D-Link at home is working fine. I wasted so much time flashing ROMs and what not. Thanks for everyone who has put info here, somebody can read here and save the pain of hitting the wall with frustration.

[Q] WiFi problems after Froyo update

After installing the Froyo update yesterday I seem to be having troubles with my WiFi connection. The connection is being dropped after a half an hour or so and I'm unable to reconnect at that time. The Desire just keeps connecting and disconnecting to my network.
I need to reset my router in order to re-establish the connection but it gets dropped again after a half an hour.
I did not experience these problems on the previous version, I did however experience something like it when I connected my PS3 to the router via WiFi in the past. After I done that I wasn't able to connect on my laptop. But I switched to a cable for the PS3 after that anyway.
Is it possible that something on the Desire triggers an overload in the router that causes it to malfunction? I'm unable to connect with my laptop when the connection is dropped on the Desire as well.
It's a Belkin f5d7632-4, which is actually a modem-router, but after disabling the DHCP server it functions fine as a wireless router.
Thank you in advance for any ideas.
If I can't find a solution I think I have to get a new wireless router, I can't go without WiFi on my Desire at home!
If that's the case, advice for a new wireless router is welcome as well. Please post the brand and type and if it's functioning fine with the new Froyo for you.

I have the same issue. I went from standard, unbranded 2.1 to OTA 2.2 like a good citizen, but now it won't connect to my belkin wirless N router, but it DOES connect to my SKY netgear router.
What's the deal?

Yes, I've spotted some more Belkin N1 users on (the dutch website) Tweakers.net with the same problem.
I retain a good connection for about half an hour. They seem to be having the same problem right from the start.

I have a similar problem with a BT HomHub 2.0 but it drops the WiFi randomly however I do not reset the router just turn the WiFi Off and On on the phone and the Desire reconnects. My Desire will also change which SSID its connected too, i.e. from my own SSID to BT Fon or BT Openzone (I have them both turned on in my Home Hub) again to get back to my own SSID I have to stop and restart the WiFi on the phone, simply asking it to move back to my own SSID doesnt work.

Just had a call with HTC Netherlands and they advised me to try it on a different network/router and/or do a factory reset to a clean 2.2.
Has anyone tried the factory reset? I doubt that will do any good. A different router would seem to work according to Jammy1 (and I didn't expect otherwise).
Apparently something killed the compatibility between Belkin routers and Android 2.2 ?!

do you guys have the Bluetooth turned on?I realised when both the Bluetooth and Wi-Fi are on at the same time,the signals tend to clash thereby resulting to connection loss. Though,I experienced this on another android device (a tablet:Archos 5 AIT) especially when a major update occurs.Still waiting for my new Desire.

Random drops also on Linksys WRT54GL with Tomato firmware...

nasimdejai said:
do you guys have the Bluetooth turned on?I realised when both the Bluetooth and Wi-Fi are on at the same time,the signals tend to clash thereby resulting to connection loss. Though,I experienced this on another android device (a tablet:Archos 5 AIT) especially when a major update occurs.Still waiting for my new Desire.
Click to expand...
Click to collapse
No Bluetooth here. Never even used it.

Try turning off the bluetooth.

Bought myself a cheap Sitecom WiFi router and it works like a charm now. But I hope HTC wil fix this and other little bugs present in this version.

I had similar problems after upgrading to Froyo (custom rom) - the Wifi seemed to get connection then as soon as I tried to use it within the browser it dropped and tries to regain IP. After a bit of fiddling with settings I have found that
i) using channel 12 (12 and 13 are only available if router is set to America location) to avoid conflict with heavy wireless coverage in my area seems to help
ii) using WPA2 encryption seems to give a much stabler connection over WPA, although now and again it forgets the passkey data, even re-entering it fails, only solve was to turn wifi off then on for it to reconnect

still having this problem...
does anybody have some news on this ?
I can connect to my home router a linksys wrt600n with WPA2-PSK key but i cant connect to a belkin N1 with WPA2-PSK enabled.
I tried every setting on the belkin router, just cant get it to connet.
My device just keeps connecting and disconnecting, it gets an ip but cant connect...
What i haven't tried is setting a maual ip and see if it connects then.

If i set it to manual ip, it works.
Does anybody have some news on this ?

What channel is your router on? Read somewhere about it not liking anything over 11...

I've been having the same issue on my Desire and on HD2Android.
If a 2.1 ROM is loaded into either of my devices TKIP and AES work perfectly.
With 2.2 it only connects through my Marconi router and doesn't obtain an IP from my Belkin N1.
I don't think this is a device issue but rather a ROM/OS issue. After speaking with some Linux guys they seem to have the opinion that the driver on 2.2 doesn't resolve it's IP address with some routers. Especially higher end ones with added features like QoS ie Belkin/Linksys.

EddyOS said:
What channel is your router on? Read somewhere about it not liking anything over 11...
Click to expand...
Click to collapse
Doesn't make a difference.
I tried everything
Jedit said:
I've been having the same issue on my Desire and on HD2Android.
If a 2.1 ROM is loaded into either of my devices TKIP and AES work perfectly.
With 2.2 it only connects through my Marconi router and doesn't obtain an IP from my Belkin N1.
I don't think this is a device issue but rather a ROM/OS issue. After speaking with some Linux guys they seem to have the opinion that the driver on 2.2 doesn't resolve it's IP address with some routers. Especially higher end ones with added features like QoS ie Belkin/Linksys.
Click to expand...
Click to collapse
Yes that was my initial thought !
But my linksys is newer then my belkin and it has no problems connecting my phone.
The 2 wireless routers are configured the same.
On android 2.1 i had no problems.

is it possible to try and install the 2.1 wifi drivers on 2.2 ?

i had the same problem 2 months ago when i first got my Desire. worked at just about every damn wifi router but the one in my house.
did some reading, no one had an answer. just seemed that it worked on some and not on others. so, i went out to the store and i picked up a Linksys after testing the linksys at the shop. my phone connected and had internet no problem. i thought, perfect, i'll take it.
brought it home, same problem. wifi connects and no internet. no setting would fix it. i brought it back to the store. and sure enough, we plugged that very router into their connection and my phone connected and worked. they obviously would not return the router because it works (and i live in a 3rd world country, forget about it).
so, **** if i could figure it out. i wound up using an older adsl/wifi router i had and no problems. but, i have a new linksys that is just sitting in a box...

its not your router, but the phone.
you can always sell the router on internet or the phone

DaFrenk said:
Just had a call with HTC Netherlands and they advised me to try it on a different network/router and/or do a factory reset to a clean 2.2.
Has anyone tried the factory reset? I doubt that will do any good. A different router would seem to work according to Jammy1 (and I didn't expect otherwise).
Apparently something killed the compatibility between Belkin routers and Android 2.2 ?!
Click to expand...
Click to collapse
I had contact with HTC Scandinavia and they also recommended a factory reset. But these guys haven't got a clue - they didn't even know this was a big problem after the froyo update. Weird when you think about it, I mean wifi is kind of a big thing for a smart phone.
But no, factory reset did NOT change a thing. And replying to other messages: this thing has nothing to do with what router you use. It seems totally random almost.

Problem with wifi connection at home (interface changed from eth to br)

Not sure if this topic belongs here, but since people in xda are generally more knowledgeable, I'll try my luck here.
Here's the deal: I have a Galaxy Nexus. I setup wifi on my router (Linksys WRT54GL+Tomato firmware) and my Galaxy Nexus device is attached on eth1 interface on the router, which is right. However, every once in a while, the I see the wifi indicator on the notification bar goes grey and there goes my wifi connection. I check my router, and see that Nexus is somehow on br0. If I turn off wifi on the phone and turn on wifi again, my router's dhcp will assign my phone to eth1 again, but after a few minutes/hours, my phones goes on to br0 again.
This is very annoying, and I'm wondering if anyone has encountered this or has an idea what's going on?
Thanks,

Yes it happens to me as well. I have a D-link Dir-615 on custom firmware which is connected to the ISP modem. But i dont think my problem is with the router as the DHCP is turned off, the modem sets the address. If there is an unstable connection the modem tries to reconnect and the internet connection on the phone goes grey, but the connection on my pc works fine. I dont know the techical know-how so I just restart the modem and all is well.

poor wifi connection

So last week my phone began having problems connecting to my Linksys e900 router. If i am more than 10 feet away from the router i lose signal completely. Before this it connected every time without a problem. Sitting at my desk 2 feet away from the router i get 0-1 bars. However i live in an apartment complex so i have a lot of access points to choose from and do not have any problem picking up a few strong signals anywhere in my apartment from my neighbors. My phone seems to be the only thing effected. My Roku, my girlfriends 4s, ipad,nexus 7, and our computers all pick up a signal perfectly anywhere in the apartment.
Things i have tried to fix the problem.
I have tried various roms,stock Blazer jb, CM10, AOKP, and, now Liquid smooth.
Reset router
Changed router channels and frequency
WPS/Non WPS connection
Unsecured router
Moving the router to various spots around the apartment
Turned on/off wifi optimization and just about every other wifi option in the settings menu.
otterbox case on/off
So now im at the point where i just want to go buy another router since i know the phone will connect to other routers. Is there something that i have completely looked over ?
tldr; Phone wont connect to my router, everything else does. Phone will connect to other routers no problem. Tried everything i can think of.

WiFi stuck on Obtaining IP/Avoided Poor Connection

For some reason, my Wifi connectivity on my GNexus has gotten really bad lately. I'm trying to connect to my home router (Netgear WNDR3400), and it gets stuck on a loop at obtaining IP address then avoided poor connection and it keeps reseting back and forth. It only manages to connect maybe 20 mins in the day and it looses the connection again.
Reseting the router only fixes the problem momentarily then the next day it can't connect again. The router is working perfectly fine in my house w/ the computer and laptops. iPhone and HTC Thunderbolt are also perfectly fine.
What can I do to fix this?

Icey34 said:
For some reason, my Wifi connectivity on my GNexus has gotten really bad lately. I'm trying to connect to my home router (Netgear WNDR3400), and it gets stuck on a loop at obtaining IP address then avoided poor connection and it keeps reseting back and forth. It only manages to connect maybe 20 mins in the day and it looses the connection again.
Reseting the router only fixes the problem momentarily then the next day it can't connect again. The router is working perfectly fine in my house w/ the computer and laptops. iPhone and HTC Thunderbolt are also perfectly fine.
What can I do to fix this?
Click to expand...
Click to collapse
Have you tried assigning a static ip address to the phone?
Also what type of network? My phone does it on a 802.1 wireless b network with identity security (individual uname and password to connect) Which is what my university uses... annoying it was, but i found out that foxfi was causeing the issue. But im assuming your home network isnt like that.

How do I assign a static IP to the phone?
My router is 802.11n. And it has network security, secured by WPA/WPA2 to be exact.

App called WiFi static will let you set a static IP within a dhcp network. You probably can do it through your router as well. I would read up on static vs dhcp if you have never set up a static IP before. Also you'll want to see what all of the clients ips are so you don't create a duplicate.
Sent from my Galaxy Nexus using xda app-developers app

Is there another solution other than that?

Icey34 said:
Is there another solution other than that?
Click to expand...
Click to collapse
Try to flash another Rom.I had the same issue with cm 10.1 based roms, but after flashing aokp based roms problem was solved.
sent from my gnex gsm using tapatalk

Anyone having this issue on the Verizon stock ROM 4.2.2? I cannot connect to any wifi with DHCP. The only way I can connect is if I enter at static IP. I have tried about a half dozen access points with no luck. I have even done a complete phone wipe of data and tried reconnecting without logging into my google account to sync down my wifi settings. This pretty much prevents me from connecting to any public wifi hotspots unless I can guess their IP range. I have never had anything other than the stock ROM and OTA updates. Is there something somewhere I can clear or reset to fix this? It worked at one time long ago prior to jellybean I think.