[ROM]Custom ROM for SAMSUNG GALAXY PRO! - Upgrading, Modifying and Unlocking

Hey guys.This is the first custom ROM for this cursed device developed by me..
MANNYGINGERv1
FEATURES
Click to expand...
Click to collapse
Android 2.3.6
Rooted
Busybox
Zipaligned
init.d support enabled
New Ringtones,Alarms and Notifications
Based on Stock kernel
Additional essential Apps
No bloatwares
~Instructions~
Click to expand...
Click to collapse
1.Download the zip from the link given below.
2.Place it in your memory card.
3.Power Off you phone.
4.Press "Power" + "T" to enter into recovery mode.
5.Use the volume “down” key to go to the 2nd option on screen which says : apply update from sdcard.
6.Click on the “HOME” key to select this option.
7.On next screen you will see manny_7510_2.3.6.zip, go down to that option by pressing the volume “down” key and press home key again to select.
8.Press Home key to select it.
9.Wait for installation.
10.Reboot
That's it!!!!!!!
U have the Custom Gingerbread ROM installed !
LINKS UPDATED!!
DOWNLOAD
Click to expand...
Click to collapse
NEW
Click to expand...
Click to collapse
http://www.mediafire.com/?pxpdacpd8b94w2w
Note-Please flash and report me..If you get status 7 error than you need to update your recovery(but i think this update wouldn't popup this error)
BUGS
Click to expand...
Click to collapse
None

I tried to flash the rom on my galaxy pro and obtained "No space to write" Error message. Do optimize the flashable zip for it. Thanks again for taking the intiative.
By the way, ITS MY FIRST POST ON XDA !!! Hurray.. :good:

Sorry for the inconvenience ..m working on it to fix this problem..
vynonline said:
I tried to flash the rom on my galaxy pro and obtained "No space to write" Error message. Do optimize the flashable zip for it. Thanks again for taking the intiative.
By the way, ITS MY FIRST POST ON XDA !!! Hurray.. :good:
Click to expand...
Click to collapse

Testing
I'll test this and give an update..
---------- Post added at 12:20 AM ---------- Previous post was at 12:00 AM ----------
Hey guys.This is the first custom ROM for this cursed device developed by me..
Click to expand...
Click to collapse
I tried following your instruction. i get the same problem as vynonline. my guess is either to use a custom recovery but since there is none, i guess it would work using odin with a tar file. Still appreciate the effort.

androider13579 said:
I'll test this and give an update..
---------- Post added at 12:20 AM ---------- Previous post was at 12:00 AM ----------
I tried following your instruction. i get the same problem as vynonline. my guess is either to use a custom recovery but since there is none, i guess it would work using odin with a tar file. Still appreciate the effort.
Click to expand...
Click to collapse
Link updated..Flash it and report(I don't own this device anymore)

androider13579 said:
i'll test this and give an update..
---------- post added at 12:20 am ---------- previous post was at 12:00 am ----------
i tried following your instruction. I get the same problem as vynonline. My guess is either to use a custom recovery but since there is none, i guess it would work using odin with a tar file. Still appreciate the effort. :d
Click to expand...
Click to collapse
link updated!!! Flash it now

vynonline said:
I tried to flash the rom on my galaxy pro and obtained "No space to write" Error message. Do optimize the flashable zip for it. Thanks again for taking the intiative.
By the way, ITS MY FIRST POST ON XDA !!! Hurray.. :good:
Click to expand...
Click to collapse
Link updated..Please check it now..

mannyvinny said:
link updated!!! Flash it now
Click to expand...
Click to collapse
I'm starting to think this device is actually cursed... Tried the updated rom.. couldn't get it to flash even with the ported cwm from developer mazen912. The error is as follows :
Code:
Finding Update Package...
Opening Update Package...
Installing Update...
assert failed: write_raw_image("/tmp/boot.img", "boot")
E: Error in /sdcard/manny_GINGERBREAD.zip
(Status 7)
Installation aborted.

Password protected
androider13579 said:
I'm starting to think this device is actually cursed... Tried the updated rom.. couldn't get it to flash even with the ported cwm from developer mazen912. The error is as follows :
Code:
Finding Update Package...
Opening Update Package...
Installing Update...
assert failed: write_raw_image("/tmp/boot.img", "boot")
E: Error in /sdcard/manny_GINGERBREAD.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Hi, I am trying to download the file but it shows as password protected.

Hey everyone..I think most of the people are getting status 7 error.This is because your recovery isn't updated.i.e. you are using stock recovery.Just update your recovery to CWM and it everything would be fine.
I'll be posting the ROM that can be flashed in stock recovery too.
Regards

pstandil said:
Hi, I am trying to download the file but it shows as password protected.
Click to expand...
Click to collapse
Yes i've password protected the file because most of the people are getting status 7 error(reason i've explained above).So i'll be uploading new ROM soon.

Why there's no response? Howz ROM working till now? please update me so that I can release a new ROM with more features.

Updated ROM
mannyvinny said:
Why there's no response? Howz ROM working till now? please update me so that I can release a new ROM with more features.
Click to expand...
Click to collapse
Will try the new ROM. Since i can't find any CWM for the pro so i don't have any choice but to use stock recovery. Hopefully it works. Will keep you posted.

androider13579 said:
Will try the new ROM. Since i can't find any CWM for the pro so i don't have any choice but to use stock recovery. Hopefully it works. Will keep you posted.
Click to expand...
Click to collapse
Great!:good:

:/
mannyvinny said:
Great!:good:
Click to expand...
Click to collapse
Tried the new rom.
This time the error is :
Code:
Opening update package...
minzip: Missed a central dir sig (at 0)
E: Can't open Gt-B7510_mannyginger.zip
At this rate we will probably run out of errors.
This was with ported cwm.. stock recovery not working too

Some one succeed installing the custom rom?'

SF. Archer said:
Some one succeed installing the custom rom?'
Click to expand...
Click to collapse
I'm also interested in this custom rom. It's the only one existing.
So, anybody succed?

Gonna test and report
Hey there, I'm gonna test this on my phone, although everybody else seems to be having trouble. Hopefully the senior developers will make this phone usable soon :fingers-crossed:
---------- Post added at 06:58 PM ---------- Previous post was at 06:02 PM ----------
Doesnt have the "update from sd" option.. Says "update from ADB"

Do you guys need a custom rom for your GPro? I moved to Galaxy Note2 year ago so never saw this tgread afterwards. But now thinking to make one.
Sent from my GT-N7100 using XDA Premium 4 mobile app

mannyvinny said:
Do you guys need a custom rom for your GPro? I moved to Galaxy Note2 year ago so never saw this tgread afterwards. But now thinking to make one.
Click to expand...
Click to collapse
it would be great if you could make a new one for us :good:

Related

[Q] Samsung Galaxy Gio Won't Root!!

I have used my Samsung Galaxy Gio GT-S5660 for about a year.
Android Version: 2.3.6
Baseband Version: S5660XXKTA
Kernel Version: [email protected]
GINGERBREAD
Carrier is Ethio Telecom
I have recently decided to root it and i have followed the instructions precisely but it wont root.
when i enter recovery mode by pressing home/power there is a text in yellow at the bottom that reads
"-- Appling Multi-CSC --
Can't Access to '/system/csc/TEN/system'."
but I still followed the process (recovery mode/“Update from SD card”/Reboot phone)
it says "-- Appling Multi-CSC --
Can't Access to '/system/csc/TEN/system'
-- Install /sdcard ...
Finding update package ...
Opening update package ...
Installing update ...
Install from sd card complete."
but after I reboot my phone it is not rooted and has no new app installed. I have tried this process with the specific zip file for my phone and the signed root package. Please help me.
rooting
saymiti said:
I have used my Samsung Galaxy Gio GT-S5660 for about a year.
Android Version: 2.3.6
Baseband Version: S5660XXKTA
Kernel Version: [email protected]
GINGERBREAD
Carrier is Ethio Telecom
I have recently decided to root it and i have followed the instructions precisely but it wont root.
when i enter recovery mode by pressing home/power there is a text in yellow at the bottom that reads
"-- Appling Multi-CSC --
Can't Access to '/system/csc/TEN/system'."
but I still followed the process (recovery mode/“Update from SD card”/Reboot phone)
it says "-- Appling Multi-CSC --
Can't Access to '/system/csc/TEN/system'
-- Install /sdcard ...
Finding update package ...
Opening update package ...
Installing update ...
Install from sd card complete."
but after I reboot my phone it is not rooted and has no new app installed. I have tried this process with the specific zip file for my phone and the signed root package. Please help me.
Click to expand...
Click to collapse
what root file do you use? if superuser installed on your gio it means its rooted
btw what kind of gio do you have? s5660, s5660m, s5660L or s5660v?
badagila said:
what root file do you use? if superuser installed on your gio it means its rooted
btw what kind of gio do you have? s5660, s5660m, s5660L or s5660v?
Click to expand...
Click to collapse
I thought i posted that on the original post but I have s5660 and there are NO new apps installed aka no superuser.
i tried a bunch of root files. I have attached it.
saymiti said:
I thought i posted that on the original post but I have s5660 and there are NO new apps installed aka no superuser.
i tried a bunch of root files. I have attached it.
Click to expand...
Click to collapse
ok i will upload my root file and ill give the link after
you are 2.3.6 right?
badagila said:
ok i will upload my root file and ill give the link after
you are 2.3.6 right?
Click to expand...
Click to collapse
yes 2.3.6.
thanks so much :laugh:
saymiti said:
yes 2.3.6.
thanks so much :laugh:
Click to expand...
Click to collapse
do you already have your CWM? try this link and pree thanks if it helps
http://www.4shared.com/zip/mbjWpa_o/root-package.html
this one is from the great Peteragent5
badagila said:
do you already have your CWM? try this link and pree thanks if it helps
this one is from the great Peteragent5
Click to expand...
Click to collapse
What's CWM?
badagila said:
do you already have your CWM? try this link and pree thanks if it helps
this one is from the great Peteragent5
Click to expand...
Click to collapse
I tried that it still doesn't work. I think it's the "-- Appling Multi-CSC -- Can't Access to '/system/csc/TEN/system'." message that's causing the problem. Cuz my friend's phone didn't have it and it was rooted in a minute. Do you have any idea how to fix that?
saymiti said:
I tried that it still doesn't work. I think it's the "-- Appling Multi-CSC -- Can't Access to '/system/csc/TEN/system'." message that's causing the problem. Cuz my friend's phone didn't have it and it was rooted in a minute. Do you have any idea how to fix that?
Click to expand...
Click to collapse
CWM= clockworkmod its a custom recovey
what procces you did to do a root?
---------- Post added at 04:06 PM ---------- Previous post was at 03:28 PM ----------
try this steps
1. put the on your SD card ( not in any folder)
2. turn off your phone
3. press and hold home + power button for 10-15 seconds
4. apply update from SD card
5. choose the that .rar file and wait until it finish installing
6. reboot your phone
badagila said:
CWM= clockworkmod its a custom recovey
what procces you did to do a root?
---------- Post added at 04:06 PM ---------- Previous post was at 03:28 PM ----------
try this steps
1. put the on your SD card ( not in any folder)
2. turn off your phone
3. press and hold home + power button for 10-15 seconds
4. apply update from SD card
5. choose the that .rar file and wait until it finish installing
6. reboot your phone
Click to expand...
Click to collapse
that's what i did!! i also tried superoneclick.
Maybe its required a cwm do you already have that?
Sent from my GT-S5660 using xda premium
---------- Post added at 05:38 PM ---------- Previous post was at 05:20 PM ----------
Im using samsung galaxy gio s5660m but dont worry i will help u to find some answers
Sent from my GT-S5660 using xda premium
---------- Post added at 06:01 PM ---------- Previous post was at 05:38 PM ----------
Dude tommorow i will upload my root file for 2.3.4 to let you try if can work on your phone
Sent from my GT-S5660 using xda premium
cwm recovey
saymiti said:
yes 2.3.6.
thanks so much :laugh:
Click to expand...
Click to collapse
dude try this first
http://www.4shared.com/zip/DMxUyhkb/px-cwm-v2.html
1. Download the file at the link above
2. Put it in to your SD card
3. Go to your recovery
4. Update from SD card
5. choose this zip and reboot your phone
pw package didn't work
that zip package did not root the phone. no error msgs either!
What os version do you have?
Sent from my GT-S5660 using xda app-developers app
had the same problem. Couldnt root. Decided do wipe, so i did 3x wipe and flash a new rom. New rom solved problem, it has root access.
Os version is needed to know what kind of update zip will be given
Sent from my GT-S5660 using xda app-developers app

[Q] System not mounted on 4.3

Hello, guys, I have recently installed Hawkish 4.3 rom in wich you must re-root the phone after install. I had a little trouble rooting - su binaries couldnt install, but its done now, or it just says it is. The problem is, my system is not mounted and I cant use the multiwindow app manager or apps to delete system apps. Here's what Window app manager and SystemAppRemover says in the screenshot. Any help would be appreciated!
karta
bun7ar said:
Hello, guys, I have recently installed Hawkish 4.3 rom in wich you must re-root the phone after install. I had a little trouble rooting - su binaries couldnt install, but its done now, or it just says it is. The problem is, my system is not mounted and I cant use the multiwindow app manager or apps to delete system apps. Here's what Window app manager and SystemAppRemover says in the screenshot. Any help would be appreciated!
Click to expand...
Click to collapse
install via odin dr.Ketan prerooted rom and after back to hawkish..
did you install it from phil recovery???
sorry ...my english not well
---------- Post added at 10:04 AM ---------- Previous post was at 09:54 AM ----------
karta jubavi said:
install via odin dr.Ketan prerooted rom and after back to hawkish..
did you install it from phil recovery???
sorry ...my english not well
Click to expand...
Click to collapse
sorry I thinking you stuck on boot like me
karta jubavi said:
install via odin dr.Ketan prerooted rom and after back to hawkish..
did you install it from phil recovery???
sorry ...my english not well
---------- Post added at 10:04 AM ---------- Previous post was at 09:54 AM ----------
sorry I thinking you stuck on boot like me
Click to expand...
Click to collapse
Yes, I installed it from Philz recovery. I will try the Dr.Ketan thing you suggested. Thanks!
bun7ar said:
Hello, guys, I have recently installed Hawkish 4.3 rom in wich you must re-root the phone after install. I had a little trouble rooting - su binaries couldnt install, but its done now, or it just says it is. The problem is, my system is not mounted and I cant use the multiwindow app manager or apps to delete system apps. Here's what Window app manager and SystemAppRemover says in the screenshot. Any help would be appreciated!
Click to expand...
Click to collapse
that happened to me too and i also tried mounting it but nothing happened.
finding a solution.
bun7ar said:
Yes, I installed it from Philz recovery. I will try the Dr.Ketan thing you suggested. Thanks!
Click to expand...
Click to collapse
be careful with phil when reboot system...go back ..I forgot other options ...after click on reboot write another...be careful... go back...and system will rebooting....thats my fails...
good luck
ravijani said:
that happened to me too and i also tried mounting it but nothing happened.
finding a solution.
Click to expand...
Click to collapse
I am now downloading Dr. Ketan rom and will tell you if the problem is solved.
Yup, that didn't work. System still not mounted. I have tried so many things, none of which work...
uhh
bun7ar said:
Yup, that didn't work. System still not mounted. I have tried so many things, none of which work...
Click to expand...
Click to collapse
installation via odin not recovery???
karta jubavi said:
installation via odin not recovery???
Click to expand...
Click to collapse
Hmm, no, I can't find odin flashable. I tried 4.1.2 with Superuser root and it worked, then I went back to 4.3 and I lost system mount again. When I flash the zip file for the root the final in the log is "unmounting system" and something else... When I try to manually mount it, it says that my root may have been lost or it doesn't do anything, it goes back to unmounted. Can you tell me where can I get the odin flashable and if it's possible to do it via Odin mobile?
bun7ar said:
Hmm, no, I can't find odin flashable. I tried 4.1.2 with Superuser root and it worked, then I went back to 4.3 and I lost system mount again. When I flash the zip file for the root the final in the log is "unmounting system" and something else... When I try to manually mount it, it says that my root may have been lost or it doesn't do anything, it goes back to unmounted. Can you tell me where can I get the odin flashable and if it's possible to do it via Odin mobile?
Click to expand...
Click to collapse
insert in google odin download...you see odin1.85 xda developers...click and voila zip file download...that version is ok for me...odin3 v1.85
---------- Post added at 10:00 PM ---------- Previous post was at 09:52 PM ----------
karta jubavi said:
insert in google odin download...you see odin1.85 xda developers...click and voila zip file download...that version is ok for me...odin3 v1.85
Click to expand...
Click to collapse
dont forget samsung drivers
karta jubavi said:
insert in google odin download...you see odin1.85 xda developers...click and voila zip file download...that version is ok for me...odin3 v1.85
---------- Post added at 10:00 PM ---------- Previous post was at 09:52 PM ----------
dont forget samsung drivers
Click to expand...
Click to collapse
Oh, Im sorry, my bad... I mean, from where can I get the odin flashable of the Dr. Ketans rom.
bun7ar said:
Oh, Im sorry, my bad... I mean, from where can I get the odin flashable of the Dr. Ketans rom.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2468042
karta jubavi said:
http://forum.xda-developers.com/showthread.php?t=2468042
Click to expand...
Click to collapse
Yup, that didn't work too... I don't know what to do anymore.

[Q]Can't update to CM11

Can't update to CM11 coming from CM10.2.
It says something like "this is for gt N5100, kona-3g?(not sure), N5100, This is kona-wifi(not sure again)"
but I'm sure my phone is N5100
I had this problem to... Flash a recovery that is for N5100 only like twrp or you can try to remove the first 4 lines in the updater scrip in the meta-inf\google\android but I'm not to sure about the folders though, open the updater script using notepad
Sent from my GT-N5100 using xda app-developers app
superng888 said:
I had this problem to... Flash a recovery that is for N5100 only like twrp or you can try to remove the first 4 lines in the updater scrip in the meta-inf\google\android but I'm not to sure about the folders though, open the updater script using notepad
Sent from my GT-N5100 using xda app-developers app
Click to expand...
Click to collapse
I already tried removing the assert line. It still failed. I'll try the Twrp. Thank you very much.
superng888 said:
I had this problem to... Flash a recovery that is for N5100 only like twrp or you can try to remove the first 4 lines in the updater scrip in the meta-inf\google\android but I'm not to sure about the folders though, open the updater script using notepad
Sent from my GT-N5100 using xda app-developers app
Click to expand...
Click to collapse
Tried twrp and deleting assert line in updater script. And it didn't work.
Hwoarang04 said:
Tried twrp and deleting assert line in updater script. And it didn't work.
Click to expand...
Click to collapse
May I know what error are you getting and which recovery you are using now?
superng888 said:
May I know what error are you getting and which recovery you are using now?
Click to expand...
Click to collapse
Problem already solved. I used philz touch. Thanks anyway. :highfive:
EDIT:
Okay that was fixed with using the latest PhilZ advanced CWM ver 6
hi there
i have exactly the same problem
im using PhilZ CWM and tried to flash the OMNIROM for GT-N5100
My Galaxy is all new and this is my first time to flash an android device
flashing the root pack and the PhilZ CWM worked like a charm, but if i try to flash the ROM for my GT-5100 it rants about "this for for kona-3g, this is device kona-wifi"
I triple-checked the build-info in the device settings, and it says everywhere "GT-N5100" - even at bootup
The ROM im trying to use is named like :
omniß4.4.20131224ßn5100-homemade.zip
im using Philz Touch 5 CWM 6 version CivZ 1.1
error is :
THis package is for "GT-N5100,kona3g..." device this is a "konawifi" (status 7)
Any ideas ??
same problem
Hwoarang04 said:
Problem already solved. I used philz touch. Thanks anyway. :highfive:
Click to expand...
Click to collapse
I have the same problem can you tell us how you fix this?? TKS
UP
wyassuda said:
I have the same problem can you tell us how you fix this?? TKS
Click to expand...
Click to collapse
Same here, it is not really helpfull to just say "Okay, problem solved" without giving a detailed explanation. Could you give us some feedback please ?
---------- Post added at 11:27 PM ---------- Previous post was at 11:16 PM ----------
wyassuda said:
I have the same problem can you tell us how you fix this?? TKS
Click to expand...
Click to collapse
I finally got the last zip of PhilZ Touch recovery, extracted it to get the recovery.img file and launched the following command: sudo heimdall flash --RECOVERY recovery.img
Because I am undr Mac osX and do not have Odin, so I use heimdall instead. Hope it will help
Back Online
I had the same issue too. I am back with CM11 nightly with some messing around.
1. Used Oden3 v3.07 and installed CivZ-Touch-6.0.4.4-Odin-5110_5100-REV1.1.tar
2. From recovery I installed philz_touch_6.41.6-n5110.
3. Rebooted, wiped, and installed my CM nightly from the main CM site (& gapps)
I used info and downloaded from Droid Views website. (cant post links yet)
Hope this helps!
oppossuminabag said:
I had the same issue too. I am back with CM11 nightly with some messing around.
1. Used Oden3 v3.07 and installed CivZ-Touch-6.0.4.4-Odin-5110_5100-REV1.1.tar
2. From recovery I installed philz_touch_6.41.6-n5110.
3. Rebooted, wiped, and installed my CM nightly from the main CM site (& gapps)
I used info and downloaded from Droid Views website. (cant post links yet)
Hope this helps!
Click to expand...
Click to collapse
Hi,
I tried the above and still get the Status 7 error. Have even tried a new version of 6.48.4-n5110 and no avail. I'm on the verge of throwing away this phablet into the dustbin.

[RECOVERY] Flashable Philz Recovery

Gentleman,
all over, please find the latest flashable PhilZ Touch 6 for LG G2 (D802)
Have fun and don't be shy and hit a "THANKS" button. :laugh:
[URL="https://www.dropbox.com/s/lf98n3xqd7kaz81/D802-Philz%7EJX%21.zip"]https://www.dropbox.com/s/lf98n3xqd7kaz81/D802-Philz%7EJX%21.zip[/URL]
Jerome-X said:
Gentleman,
all over, please find the latest flashable PhilZ Touch 6 for LG G2 (D802)
Have fun and don't be shy and hit a "THANKS" button. :laugh:
https://www.dropbox.com/s/lf98n3xqd7kaz81/D802-Philz%7EJX%21.zip
Click to expand...
Click to collapse
But how to install it, I am stock in philz recovery, cant boot
Stock rom is installed (4.2.2) ? then use this one to install this recovery:
http://forum.xda-developers.com/showthread.php?t=2701638
Does it work on 4.4.2 ?
i dont know, if u changed anything, but ur Version is the latest from... 03.03.2104 (6.19.7)
Newest is from 31.03.2013 (6.25.4)
Or is there a different from urs and Philz_Touch_Advanced_Version?
Easiest way, check Goo.im Link from philz touch!!!
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d802
Is this kernel compatible with cm11 or just stock ? Thanks
jeepcook said:
Is this kernel compatible with cm11 or just stock ? Thanks
Click to expand...
Click to collapse
What kernel? This is a recovery image...
LenAsh said:
What kernel? This is a recovery image...
Click to expand...
Click to collapse
oups
You using rom CM 11..can you something king about it??..v...v.....i want up it but i dont know how they do it!!!!!!!!!!!!!!!!!!!!!!!
vuut said:
You using rom CM 11..can you something king about it??..v...v.....i want up it but i dont know how they do it!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
UHHHH ... what ..??? i do not understand this message !!
---------- Post added at 07:52 PM ---------- Previous post was at 07:44 PM ----------
Hi ,,, i have philz recovery ... now i wanna know what size background i need to get a full background in Recovery ... i have made an map with the name Custom_res .. but when going to the PNG. FILE its gives me six small ones .. any help ... on what size png. to get an good background in Recovery ???
Will this work in 4.4.2? I just rooted my phone and installed Autorec to have TWRP but i prefer Philz. can i use this?
I'm currently using TWRP 2.6.3.4, if I want to change it to Philz, do I just need to flash the zip? Because some people said they got an error and can't boot into their recovery anymore.. :/
Sent from my LG-D802 using XDA Premium 4 mobile app
marshygeek said:
Will this work in 4.4.2? I just rooted my phone and installed Autorec to have TWRP but i prefer Philz. can i use this?
Click to expand...
Click to collapse
Yes,, it will work on 4.4.2. I had it on Pardus 4.4.2 .. but went back to Pardus 4.2.2. There are to many thing NOT really working yet ..!!
Good luck !!
---------- Post added at 07:31 PM ---------- Previous post was at 07:29 PM ----------
Rei Zazie said:
I'm currently using TWRP 2.6.3.4, if I want to change it to Philz, do I just need to flash the zip? Because some people said they got an error and can't boot into their recovery anymore.. :/
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This zip has no problems whatsoever ... just flash and run
No adb needed ..!! Goodluck !!
Ive downloaded the zip file to my pc but when i unzip it it has no BAT file to run?
I thought that im supposed to connect my lg g2 d802 to my pc via usb.
Ive got all drivers installed correctly
But when i download the zip file to my pc it hasnt got any windows batch file inside anywhere! Am i doing something wrong here?
wolverine73 said:
Ive downloaded the zip file to my pc but when i unzip it it has no BAT file to run?
I thought that im supposed to connect my lg g2 d802 to my pc via usb.
Ive got all drivers installed correctly
But when i download the zip file to my pc it hasnt got any windows batch file inside anywhere! Am i doing something wrong here?
Click to expand...
Click to collapse
"flashable" zip as in the OP means u have to flash via your current recovery, I guess (of course if you are rooted and installed a custom recovery).
Does anybody have a mirror? I can't download the recovery since I get server problems...
This is noto the mirror.
This is tge officiale repo.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d802
Hey guys. Has anyone tried to install this via Flashify on 4.4.2 STOCK LG ROM? Will it work? Thanks ahead.
Cheers.
EDIT: Found my answer, wrong thread also!
Jerome-X said:
Gentleman,
all over, please find the latest flashable PhilZ Touch 6 for LG G2 (D802)
Have fun and don't be shy and hit a "THANKS" button. :laugh:
https://www.dropbox.com/s/lf98n3xqd7kaz81/D802-Philz%7EJX%21.zip
Click to expand...
Click to collapse
Nothing Here
The file you're looking for has been deleted or moved.
https://www.dropbox.com/s/ml97hneej5o3s8k/D802-Philz~JX%21.zip
404 error
Another link plz?
Thanks.

[OTA][NOKIAX] Nokia X Firmware 1.2.4.1 Update

Here is the latest update for Nokia X. The Update is v1.2.4.1.
Note:Your Nokia X needs to be v1.1.2.2 in order to update. Don't use this method on other versions.
Steps:
1. Download the update zip here.
2. Place it in your SD Card.
3. Reboot to Recovery.
4. Flash zip file.
5. Reboot. If the recovery asks you to fix the Superuser, let it fix it.
6. Donee!
Still can NOT update
Really thank you to your file but my nokia XL 1.1.1.0 still can not update with your instruction
Anyone can help
XL said that installation is abborted after it had checked the zip package :crying:
meodenvn said:
Really thank you to your file but my nokia XL 1.1.1.0 still can not update with your instruction
Anyone can help
XL said that installation is abborted after it had checked the zip package :crying:
Click to expand...
Click to collapse
I think the heading says it all. Its for Nokia X. I have Nokia X, not XL. Sorry.
Dom3616 said:
I think the heading says it all. Its for Nokia X. I have Nokia X, not XL. Sorry.
Click to expand...
Click to collapse
Yeah !! My fault =.= I got some confused between X and XL
Hi, my device is nokia x, but update with recovery mode still failed, show up"abborted" just like xl case. Thank before.
Dom3616 said:
Here is the latest update for Nokia X. The Update is v1.2.4.1.
Note:Your Nokia X needs to be v1.1.2.2 in order to update. Don't use this method on other versions.
Steps:
1. Download the update zip here.
2. Place it in your SD Card.
3. Reboot to Recovery.
4. Flash zip file.
5. Reboot. If the recovery asks you to fix the Superuser, let it fix it.
6. Donee!
Click to expand...
Click to collapse
Many Many Thanks.Its worked perfectly.No error and no rooting problem during install.Thanks for your upload.Appretiate ur good hard work for us during ur busy days.and "Eid Mubarak"..
---------- Post added at 06:23 PM ---------- Previous post was at 06:19 PM ----------
ahmadsol2410 said:
Hi, my device is nokia x, but update with recovery mode still failed, show up"abborted" just like xl case. Thank before.
Click to expand...
Click to collapse
Its worked perfectly in my NX. Which version of stock rom are you using???
My version now :1.1.2.2
There's 2 file zip that u post, which one should I flash??
Copied to the SD card, but it aborts whilst verifying the installation. Zip file opens OK on PC
whyyy :"(
petevick said:
Copied to the SD card, but it aborts whilst verifying the installation. Zip file opens OK on PC
Click to expand...
Click to collapse
not working plz help ..
me too
A7madx said:
not working plz help ..
Click to expand...
Click to collapse
same problem bro Installation aborted
Problem is in Stock Recovery.I was trying to install this zip using Stock Recovery but it shown the same error that you are all faced.Then I flashed CWM recovery.Using this recovery I Installed this Firmware update successfully...now I am using it..
hope it may help you..
the v1.2.4.1 makes the x even smoother it runs under 30% ram the task switcher is cool but still no app list as on the nokia x2 if you cant update just w8 for the OTA thats second day of the update so it will roll out till the end of the week
ok i flashed via cwm working fine now .. but i cant type !! my keyboard show no licence ! or smthing !! help !! i cant type anything
A7madx said:
ok i flashed via cwm working fine now .. but i cant type !! my keyboard show no licence ! or smthing !! help !! i cant type anything
Click to expand...
Click to collapse
Where did u type?? in write msg or something else??....In my case there is no such problem..
Would u tell me to flash cwm on nokia x? Tks
Sent from my Nokia_X using XDA Free mobile app
ahmadsol2410 said:
Would u tell me to flash cwm on nokia x? Tks
Sent from my Nokia_X using XDA Free mobile app
Click to expand...
Click to collapse
Download "nokia X manager"..you will flash CWM recovery easilly..
meanjan_basu said:
Where did u type?? in write msg or something else??....In my case there is no such problem..
Click to expand...
Click to collapse
everywhere i cant even search a contact ,, the whole nokia keyboard not working
ahmadsol2410 said:
My version now :1.1.2.2
There's 2 file zip that u post, which one should I flash??
Click to expand...
Click to collapse
petevick said:
Copied to the SD card, but it aborts whilst verifying the installation. Zip file opens OK on PC
Click to expand...
Click to collapse
A7madx said:
not working plz help ..
Click to expand...
Click to collapse
Nanosudha said:
same problem bro Installation aborted
Click to expand...
Click to collapse
meanjan_basu said:
Many Many Thanks.Its worked perfectly.No error and no rooting problem during install.Thanks for your upload.Appretiate ur good hard work for us during ur busy days.and "Eid Mubarak"..
---------- Post added at 06:23 PM ---------- Previous post was at 06:19 PM ----------
Its worked perfectly in my NX. Which version of stock rom are you using???
Click to expand...
Click to collapse
Thanks bro. Khair Mubarak.
And thanks for helping out people in this thread.
A7madx said:
everywhere i cant even search a contact ,, the whole nokia keyboard not working
Click to expand...
Click to collapse
Goto Recovery, Wipe Cache and Dalvik Cache and then see if the problem is fixed.
Dom3616 said:
Goto Recovery, Wipe Cache and Dalvik Cache and then see if the problem is fixed.
Click to expand...
Click to collapse
edit .. : i 'v fixed the problem thank you .. i got a backup from titanium and restored the nokia keyboard app ..and now solved thank you again

Categories

Resources