Related
I have noticed that many of the sgs2 docking stations on sale have separate power and micro USB connection.
Seeing as the usual USB-otg cable doesn't charge the phone at the same time, I was just wondering if anyone knew whether a USB-otg cable would be co pitiable with docking stations and allow charging at the same time?
Thanks in advance for any help!
-J
If you used original Samsung DockingStation you would figure out that Samsung use USB Data (+/-) for output Sound ! Means that if you dock your S2 into the Station the ID Pin (PIN4 of MicroUSB) would be connected to 365k to GND which bring up the S2 to Audio-Output-Mode (Docking-Mode) over USB Data Lines. So you couldn´t use USB anymore at these time for Data-Transfer like USB-Computer or USB-OTG !!
Thanks for the reply! The official dock is the SoundStation right? Would what you mentioned still be true for a 3rd party dock which only charges the phone such as: http://www.mobilefun.co.uk/desk-dock-for-samsung-galaxy-s2-i9100-p29488.htm
Thanks again!
-J
your linked Dock seems to have USB Sync and Charging at the same time:
User post these:
Perfect addition for my SGS2. The desk stand provides re-charging as well as data transfer via Samsung Kies through the attached USB cable. The item is well made and the phone is a snug fit. Well pleased.
Click to expand...
Click to collapse
If USB Connection would be available you could check if usb-Otg would be available also. But i think it isn´t because the usb-conector inside the Dock (for Phone) should connect direkt to output Usb Connector and these seems to be also ID Pin for Check if OTG-Mode started !!
If you would use both you have to build or modified your own Dock !
!!!!!! But its your own RISK !!! If something broke because of handicraft its your responsible !!!!!!
I am really looking for a mod where we could BOTH charge and use USB OTG connected to a powered USB Hub. Also, I wonder if there is anyway we could use MHL functionality (I know it may be practically impossible). Samsung should have given separate HDMI, USB and charging port so we could have powered and used them simultaneously!
Did you ever find an answer to charging and using USB OTG?
I have the official Samsung desktop dock for the GN with pogo pins for charging. I cut out a notch in the left side of the dock so that I could access the USB port on the phone when it's docked. I'd hoped I could then attach a USB OTG cable and mount a flash drive while the phone charged via the pogo pins.
Unfortunately, the two functions seem to be mutually exclusive. If the phone is in the dock and charging and I attach the cable and flash drive, they are not recognized by the phone. Or, if I attach the cable and flash drive first and mount the flash drive before placing the phone in the dock, charging doesn't initiate when I put the phone in the dock.
Does anyone know if there is some way via software or hardware to force pogo pin charging while a flash drive is attached and mounted via a USB OTG cable?
I will try tomorrow on my self built car pogo charger and usb otg. I have aokp with the fast charge override feature.
subvertz said:
I will try tomorrow on my self built car pogo charger and usb otg. I have aokp with the fast charge override feature.
Click to expand...
Click to collapse
Sounds great! Thanks much. If it works, it'll tempt me to go to AOKP myself.
Any luck on this?
I too want to use OTG functionality while charging phone in the official car dock.
USB OTG + charging
I'm actually trying to get the same get something like this going on a galaxy s2 (the I9100g with the omap processor) or a GN, My goal is to get usb host and charging going through the same cable. By making some changes in the kernel i've got the phone to think its in charging mode while in host mode, but if you check the battery status, it's still draining even though it says "charging" and I've got the a usb "Y" cable connected to a 5v 2amp power source.
I think cyanogenmod (there was a post on this here and a standalone app that eventually rolled into the latest cm7 nightly) has this working on a BN nook color (also TI-OMAP Processor), but I have not been able to verify this.
Does anybody have host+charing working on any device with an OMAP processor?
Sorry for the delay, I had an emergency work trip offshore on an oil rig. I can try it out tonight.
Results. Charging OTG killed pogo charging. I tried mounting in pogo charger with OTG already attached mounted with a basic thumb drive. Charging never started. I tried charging with pogo first, then plugging in OTG, charging stopped. I checked to make sure it was actually discharging by waiting for a few percent decrease.
Sorry, I was hoping it would work too.
subvertz said:
Results. Charging OTG killed pogo charging. I tried mounting in pogo charger with OTG already attached mounted with a basic thumb drive. Charging never started. I tried charging with pogo first, then plugging in OTG, charging stopped. I checked to make sure it was actually discharging by waiting for a few percent decrease.
Sorry, I was hoping it would work too.
Click to expand...
Click to collapse
Thanks for giving it a try. It would be interesting to know if this behavior is built into the hardware or could be modified via software/in the kernel. It's consistent with what happens when using a powered USB hub.
Other than a software mod, I'd sure like to see someone start making and selling an Accessory Charger Adapter as described in Chapter 6 of the USB Battery Charging Specification document from 2010. It's the exact thing needed to use USB OTG and charge at the same time.
Anyone knows if its possible to charge via USB, with a device connected?
I connect an adapter microUSB to USB OTG, than connect USB OTG in a USB HUB and than i connect a device in one USB and force in another, is it possible or not??
It may work, since connecting to the pc works.
Has anyone found a MHL cable that also includes a USB OTG port? Samsung reportedly changed from a 5-pin configuration to an 11-pin configuration to allow MHL with USB Host mode simultaneously. Perhaps for a future Desktop Mode?
Has anyone been able to find one of these cables?
Just wanted to update, I believe I found the type of connector that I was looking for, but it is missing HDMI and it is sold out. This essentially could give you PC type connectivity on the S3.
http://www.mobilefun.com/35462-mobile-fun-connection-kit-for-samsung-galaxy-s3.htm
I think we still have a bit of a wait. What you found is essentially a USB OTG hub with some card readers built in. I seriously doubt this will pass through the pins for HDMI to work out of the usb port. We'll see something when this phone finally launches everywhere. It's not even out in the US officially yet
EDIT: Sorry, didn't see the article in the link in the OP. Man.. I might have to get me a GS3 now. I'm quite satisfied with the reasoning for a pin change. =)
Samsung sells 11 pin MHL adapters and USB female to Micro USB male adapters on their accessories page, but I'm not sure if you could piggy back the USB input into the charging port of the MHL cable. I don't see any all in one cables on their site, and the desktop dock is just micro usb/audio. I tried.. =(
Here's what I was looking at.
Old and mostly unrelated. See edit.
I happened to buy what looks exactly like that adapter today earlier at Micro Center. Now, I do have a Galaxy Nexus, but the USB OTG works great with keyboards/usb/mice/hubs; however, I cannot get it to simultaneously work with my MHL adapter. I understand the GS3 has a different pin layout though for MHL - my phone works with my MHL adapter correctly, but I didn't think it would have any change on the USB OTG. I'll most likely be breaking these apart and start tinkering. My goal is to show people how much of a full desktop-like experience I can provide from my phone, since so many people somehow think a GNex or GS3 are inferior to tablets, just because they're smaller... lol
Good luck finding information out on some kind of MHL/USB OTG setup. I'm just trying to provide any information I can from how my situation works with MHL/OTG, since I'm currently on the quest to achieve this myself.
kynolin said:
EDIT: Sorry, didn't see the article in the link in the OP. Man.. I might have to get me a GS3 now. I'm quite satisfied with the reasoning for a pin change. =)
Samsung sells 11 pin MHL adapters and USB female to Micro USB male adapters on their accessories page, but I'm not sure if you could piggy back the USB input into the charging port of the MHL cable. I don't see any all in one cables on their site, and the desktop dock is just micro usb/audio. I tried.. =(
Here's what I was looking at.
Old and mostly unrelated. See edit.
I happened to buy what looks exactly like that adapter today earlier at Micro Center. Now, I do have a Galaxy Nexus, but the USB OTG works great with keyboards/usb/mice/hubs; however, I cannot get it to simultaneously work with my MHL adapter. I understand the GS3 has a different pin layout though for MHL - my phone works with my MHL adapter correctly, but I didn't think it would have any change on the USB OTG. I'll most likely be breaking these apart and start tinkering. My goal is to show people how much of a full desktop-like experience I can provide from my phone, since so many people somehow think a GNex or GS3 are inferior to tablets, just because they're smaller... lol
Good luck finding information out on some kind of MHL/USB OTG setup. I'm just trying to provide any information I can from how my situation works with MHL/OTG, since I'm currently on the quest to achieve this myself.
Click to expand...
Click to collapse
I'm not really sure why people think they NEED MHL and USB OTG simultaneously to get a "desktop-like experience". You can already accomplish this with just a plain MHL cable and a bluetooth keyboard and mouse as was demonstrated in the Connectivity Demo video on youtube.
Edit: Actually I just remembered about portable hard drives. If you want to hook up a mouse, keyboard AND hard drive I wonder if you can plug all three into a powered USB hub connected to a bluetooth dongle. Hmm...
I'm looking for a dock with USB OTG, charging and MHL. Maybe some day.
I believe this is already capable. Everything I say here is purely speculative, but what I see is that Samsung moved to a 11-pin connector for MHL and the standard 5-pin is no longer functioning. To call it MHL, they probably have to use the same standards for data encoding... but they simply "moved" the pins.
I put "moved" in quotes because of the way in which a standard 4 pin USB cable works (or 5 pin for our case)... you have a +5V, Ground, Data + and Data - (one data to phone, one data from phone, carrying ALL data). Since our phones still sync via 5-pin cables, this means the 5 pins are still "hot" for data like all other phones. I am presuming, that for the 11-pin connector, Samsung simply added a few more data+ and data- connectors (much like having two or three USB ports on a normal computer) but consolidated the ground/5V reference. I could be wrong, but it would make sense.
Lets call the stock 5 pin data connectors (2 wires) USB1. This is where MHL is conventionally sent through and all sycing can be completed through, 5 pin cable or 11 pin cable. If samsung added two additional USB ports to the single connector, lets say MHL is now over USB2 (wires inaccessible to 5 pin connectors). This frees up bandwidth and COM ports on USB1 and USB3 to use for accessories like a USB hard drive and keyboard/mouse. On a 5 pin connector, however, only USB1 is accessible. The Samsung 11pin to 5pin MHL adapter simply moves the data+/- from USB2 to USB1 (standard 5 pin location), so with the adapter you are syncing/exporting video over USB2 on the phone with a standard 5pin cable.
My thinking is such: If you plug in the OEM 11pin MHL adapter, it will also have access to the standard 5pin USB1 connection. Since USB2 is used for MHL, you can then plug any OTG device into the micro USB connector on the MHL adapter to make use of it. The only problem here is power (or lack thereof). By plugging in a USB hub with a discrete power source, plugging this into the MHL adapter, and plugging in the USB device of choice into the HUB, you *SHOULD* be able to get simultaneous data and HDMI. This assumes they put the standard 5 pins to the connector on the side of the MHL adapter and only wired the HDMI to the USB2 area.
Alternatively, you *SHOULD* be able to plug the micro USB cable from the MHL adapter into a computer, and simultaneously be able to sync files while outputting HDMI video. It sort of just comes down to being able to provide power to the MHL adapter on the +5V pin while using the data pins to access the phone. As soon as I have my MHL I'll figure it out, but that could be a bit. If anybody has access to a pinout from a Samsung 11 pin micro USB that would be helpful too.
Again, just dreaming here. I don't know anything about this, but if I was the engineer at Samsung I would choose this over analog outputs like Apple used for their giant connector.
kthung said:
I'm not really sure why people think they NEED MHL and USB OTG simultaneously to get a "desktop-like experience". You can already accomplish this with just a plain MHL cable and a bluetooth keyboard and mouse as was demonstrated in the Connectivity Demo video on youtube.
Edit: Actually I just remembered about portable hard drives. If you want to hook up a mouse, keyboard AND hard drive I wonder if you can plug all three into a powered USB hub connected to a bluetooth dongle. Hmm...
Click to expand...
Click to collapse
for me at least i already have several keyboards and mice ... none are bluetooth.
I'm looking for the cheapest option available.
I'm just hoping someone releases a cable with 4 plugs:
Male MHL - To Phone Obviously
Female MicroUSB: To plug in charger
Female HDMI - To Display
Female USB - To USB Device
That's all I want... should cost less than $2 to make, just sell it for $20 and I'd be happy.
v8bait said:
I believe this is already capable. Everything I say here is purely speculative, but what I see is that Samsung moved to a 11-pin connector for MHL and the standard 5-pin is no longer functioning. To call it MHL, they probably have to use the same standards for data encoding... but they simply "moved" the pins.
I put "moved" in quotes because of the way in which a standard 4 pin USB cable works (or 5 pin for our case)... you have a +5V, Ground, Data + and Data - (one data to phone, one data from phone, carrying ALL data). Since our phones still sync via 5-pin cables, this means the 5 pins are still "hot" for data like all other phones. I am presuming, that for the 11-pin connector, Samsung simply added a few more data+ and data- connectors (much like having two or three USB ports on a normal computer) but consolidated the ground/5V reference. I could be wrong, but it would make sense.
Lets call the stock 5 pin data connectors (2 wires) USB1. This is where MHL is conventionally sent through and all sycing can be completed through, 5 pin cable or 11 pin cable. If samsung added two additional USB ports to the single connector, lets say MHL is now over USB2 (wires inaccessible to 5 pin connectors). This frees up bandwidth and COM ports on USB1 and USB3 to use for accessories like a USB hard drive and keyboard/mouse. On a 5 pin connector, however, only USB1 is accessible. The Samsung 11pin to 5pin MHL adapter simply moves the data+/- from USB2 to USB1 (standard 5 pin location), so with the adapter you are syncing/exporting video over USB2 on the phone with a standard 5pin cable.
My thinking is such: If you plug in the OEM 11pin MHL adapter, it will also have access to the standard 5pin USB1 connection. Since USB2 is used for MHL, you can then plug any OTG device into the micro USB connector on the MHL adapter to make use of it. The only problem here is power (or lack thereof). By plugging in a USB hub with a discrete power source, plugging this into the MHL adapter, and plugging in the USB device of choice into the HUB, you *SHOULD* be able to get simultaneous data and HDMI. This assumes they put the standard 5 pins to the connector on the side of the MHL adapter and only wired the HDMI to the USB2 area.
Alternatively, you *SHOULD* be able to plug the micro USB cable from the MHL adapter into a computer, and simultaneously be able to sync files while outputting HDMI video. It sort of just comes down to being able to provide power to the MHL adapter on the +5V pin while using the data pins to access the phone. As soon as I have my MHL I'll figure it out, but that could be a bit. If anybody has access to a pinout from a Samsung 11 pin micro USB that would be helpful too.
Again, just dreaming here. I don't know anything about this, but if I was the engineer at Samsung I would choose this over analog outputs like Apple used for their giant connector.
Click to expand...
Click to collapse
hi v8bait, are you able to get data thru the micro usb port at the side of the 11-pin mhl adapter? i was thinking of using the motorola lapdock with my s3 thru the mhl adaptor (other then a micro hdmi male connector, the lapdock also has a micro usb male connector that apparently send out power as well as push keyboard/trackpad data upstream) - if it works, we can have an inexpensive "clambook"
Just to recap,
Will this we possible:
Official MHL adapter -> hdmi to monitor.
|
>OTG cable> Powered USB hub> USB keyboard & mouse.
In other words, the PC Experience with a keyboard and mouse.
Dont really want to spend the money to buy a Bluetooth keyboard and mouse when the USB ones can work just fine (theoretically).
romulusram said:
Just to recap,
Will this we possible:
Official MHL adapter -> hdmi to monitor.
|
>OTG cable> Powered USB hub> USB keyboard & mouse.
In other words, the PC Experience with a keyboard and mouse.
Dont really want to spend the money to buy a Bluetooth keyboard and mouse when the USB ones can work just fine (theoretically).
Click to expand...
Click to collapse
I am also very interested in this exact thing. Using USB devices (multiple ones, e.g. plugging a powered USB hub into S III and then plugging them in) but also putting out S III video to HDMI.
However the other workaround is using AllShare Cast. In fact that is the route I'll likely go, because of the other unique advantages of AllShare Cast (i.e. using it for presentations to screens, etc.)
So: has anyone plugged a powered USB hub into S III and used multiple devices? Such as a keyboard and mouse?
I also want to use this S III more as a computer. the other perfect thing I wish I could buy would be a keyboard case, like the one available for iphone, so I can prop the S III up on a kickstand and use a real mini-QWERTY physical keyboard.
macdroid01 said:
I am also very interested in this exact thing. Using USB devices (multiple ones, e.g. plugging a powered USB hub into S III and then plugging them in) but also putting out S III video to HDMI.
However the other workaround is using AllShare Cast. In fact that is the route I'll likely go, because of the other unique advantages of AllShare Cast (i.e. using it for presentations to screens, etc.)
So: has anyone plugged a powered USB hub into S III and used multiple devices? Such as a keyboard and mouse?
I also want to use this S III more as a computer. the other perfect thing I wish I could buy would be a keyboard case, like the one available for iphone, so I can prop the S III up on a kickstand and use a real mini-QWERTY physical keyboard.
Click to expand...
Click to collapse
We're in the same boat; i want to use the s3 like a mini computer too. I think it'd be great for business travel, when i dont really need a laptop during the day but want something when i'm back in hotel room. I'd much rather use hotel TV instead of a laptop because that's what i am used to at home... pc hooked to TV.
I've been planning to use the allshare cast dongle too, but they dont seem to be available yet. I was thinking HDMI out with the allshare.. charging with the wireless charging kit and then keyboard and mouse with USB OTG. My logitech unifying receiver for keyboard/mouse works perfectly i just need the wireless charging and allshare dongle to be released.
For what it's worth I tried a powered USB hub and could not get it to work with the s3.
faulkton said:
For what it's worth I tried a powered USB hub and could not get it to work with the s3.
Click to expand...
Click to collapse
Wait so your saying you tried a (a) powered USB hub with a OTG cable connected to the phone or you tried a (b) powered USB hub connected with a OTG cable to the MHL adapter and then to the phone?
If it was (a) then there are some vids out there of ppl using powered USB hubs.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
I'm puzzled that there aren't any more postings about this kind of stuff. I was expecting the GS3 to be easy to use as a "PC" replacement but it seems no one besides us few wanted to do that ? A simple cable should have done it but I'd even be willing to shell out 40-50$ for a decent dock that would do just that
romulusram said:
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
Click to expand...
Click to collapse
Me too.
But it is possible to get that this way working:
Code:
S3 -> Mobile Fun Connection Kit -> microusb -> HDTV Adapter TIP (5 to 11 Pin Converter) -> MHL HDMI adapter
|
-> USB -> keyboard etc.
Links
http://www.mobilefun.com/35462-mobile-fun-connection-kit-for-samsung-galaxy-s3.htm
http://www.samsung.com/us/mobile/cell-phones-accessories/EPL-FU10BEGSTA
Maybe I'm not reading these posts correctly but I am using an usb keyboard and a usb mouse on my S3 with no problems using these two accessories:
http://www.amazon.com/Belkin-USB-2-...e=UTF8&qid=1343845994&sr=8-1&keywords=usb+hub
http://www.amazon.com/Micro-USB-OTG...UTF8&qid=1343846045&sr=1-3&keywords=otg+cable
Have my keyboard and mouse plugged into the usb hub and then the usb hub into my usb OTG cable which of course plugs into the S3. Everything's working on my end.
romulusram said:
So has anyone received their Official MHL adapater and tried USB OTG?
Very interested in this.,,
Click to expand...
Click to collapse
I have the official MHL adapter and there is no female USB port on it for OTG
badbeat33 said:
Maybe I'm not reading these posts correctly but I am using an usb keyboard and a usb mouse on my S3 with no problems using these two accessories:
http://www.amazon.com/Belkin-USB-2-...e=UTF8&qid=1343845994&sr=8-1&keywords=usb+hub
http://www.amazon.com/Micro-USB-OTG...UTF8&qid=1343846045&sr=1-3&keywords=otg+cable
Have my keyboard and mouse plugged into the usb hub and then the usb hub into my usb OTG cable which of course plugs into the S3. Everything's working on my end.
Click to expand...
Click to collapse
You are not reading it right.
they want to use the MHL adapter, too.
As far as i can tell, the MHL adapter needs to be in the phone, not a hub. it is all dictated (the output being OTG, or MHL) by the impedance of what is plugged in. It is an either or situation.
Perhaps with a firmware update they MIGHT be able to run both signals and split it.. but i doubt it.
While researching ability to use USB DAC while charging the phone in the car I found this video. The guy clearly says that tablet is charging while accessing all those accessories via USB OTG. Similar cables are found on ebay, called "USB OTG with power".
The big question is: would the Galaxy S3 actually charge while using USB DAC at the same time? It should be possible, but I don't have the phone yet (still considering it), nor do I have the cable, nor a USB DAC In theory it should be the same with any accessory - can someone actually confirm either way, whether phone can or can't charge in USB OTG mode with similar cable? This video shows similar setup on Galaxy S (only it's normal OTG cable, USB hub, usb Y-cable and card reader) and it's definitely charging while mounting USB devices! Will S3 do the same?
I fear that upgrading from Galaxy S with voodoo control of Wolfson chip to north-American S3 with worse audio path might not suit me if there's no way to power the phone and use external DAC at the same time in the car... I hope there is a way... I appreciate any advice and opinions.
It's a first time I see such cable...All I read was people saying it's impossible in the first place. Well, hopefully in 2 weeks I'll be able answer your question
midirt said:
While researching ability to use USB DAC while charging the phone in the car I found this video. The guy clearly says that tablet is charging while accessing all those accessories via USB OTG. Similar cables are found on ebay, called "USB OTG with power".
The big question is: would the Galaxy S3 actually charge while using USB DAC at the same time? It should be possible, but I don't have the phone yet (still considering it), nor do I have the cable, nor a USB DAC In theory it should be the same with any accessory - can someone actually confirm either way, whether phone can or can't charge in USB OTG mode with similar cable? This video shows similar setup on Galaxy S (only it's normal OTG cable, USB hub, usb Y-cable and card reader) and it's definitely charging while mounting USB devices! Will S3 do the same?
I fear that upgrading from Galaxy S with voodoo control of Wolfson chip to north-American S3 with worse audio path might not suit me if there's no way to power the phone and use external DAC at the same time in the car... I hope there is a way... I appreciate any advice and opinions.
Click to expand...
Click to collapse
HI. I Got it working on SONY XPERIA S now i will play with GALAXY SII AND SIII , check my siganture and website --> follow me i hope i can help
sonic_boom said:
HI. I Got it working on SONY XPERIA S now i will play with GALAXY SII AND SIII , check my siganture and website --> follow me i hope i can help
Click to expand...
Click to collapse
Looks like it's possible on some devices, but not with Galaxy and Nexus family... But it would be great if you can confirm that, so let me know if you can try it. Thanks.
Finally got the cable.
The result - nope, doesn't charge
Maybe the "Allshare hub" could do what your asking for?
sonic_boom said:
HI. I Got it working on SONY XPERIA S now i will play with GALAXY SII AND SIII , check my siganture and website --> follow me i hope i can help
Click to expand...
Click to collapse
Sonic, any luck with your friends phone? Really looking foward to your results :fingers-crossed:
Do you have part #s for the variable resistors in your samsung post or at least where you got them from? I would be willing to try some things out if I could find the right pieces. What I really want to get my hands on is the MHL adapter that was shown off with that spider laptop at IFA a couple weeks ago..
SUCCESS!!! I can confirm that this USB OTG cable (http://ebayitem.com/190710044655) DOES CHARGE MY GALAXY S3! I plugged in USB cardreader with SD card into the phone through this cable (it lit up and card is fully readable), then plugged USB cable end into PC and phone showed a charging icon! Moreover, after waiting for 5 min. with screen off (cardreader still glowing blue and working) battery has gone up from %72 to %75 (and while I was writing this, to 78%), so it is indeed charging! Yay! It probably won't get up in the car, where just phone alone is "not discharging" at best from the car adapter, but at least it should allow me to listen to music with quality DAC and use navigation without (or with minimal) discharging.
I have not tested it with USB DAC that I intend to use for my car (Behringer UCA222), because I have to go out and buy it. Hopefully it works. Anyway, this cable definitely works with simultaneously charging my north-american Samsung Galaxy S3 (from Bell Canada) while powering USB cardreader!
Somebody else has mentioned that another cable (http://ebayitem.com/120980364117) also worked in his Galaxy S2.
I bought Behringer UCA222 USB DAC and tested it in my car with the USB OTG cable with power that I mentioned. It works great! And the phone is indicating a charge. Sometimes when first playing music after plugging the device it sounds like fast forward for a few seconds (I guess clock rate mismatch or something similar), but after the presumably clock is locked it plays perfectly fine.
midirt said:
SUCCESS!!! ...
Click to expand...
Click to collapse
That is outstanding..gonna order one of these guys right now.
Here is a better link for all the ebay listings. Be aware of the differences, MicroUSB adapters would allow you to use your existing charge cable to plug into it while the standard USB would require you to be very close to the charger or have a USB A-A cable to attach to a power source.
http://www.ebay.com/sch/i.html?_trk...Host+OTG+Cable+++USB+power&_sacat=0&_from=R40
Jeremy.Stewart85 said:
That is outstanding..gonna order one of these guys right now.
Here is a better link for all the ebay listings. Be aware of the differences, MicroUSB adapters would allow you to use your existing charge cable to plug into it while the standard USB would require you to be very close to the charger or have a USB A-A cable to attach to a power source.
http://www.ebay.com/sch/i.html?_trk...Host+OTG+Cable+++USB+power&_sacat=0&_from=R40
Click to expand...
Click to collapse
The problem is that apparently not all of those cable work in terms of charging the phone. People say mostly that it doesn't work. The only guy mentioned success is with the cable I bought, but he then confirmed it with another, more convenient cable. I have the one that needs a USB extension cable to reach the charger, but it's about a buck on ebay, so no problem there. But not all cables work this way: most reportedly will allow you to power USB accessories but not charge the phone.
I found that this configuration works for charging while in USB HOST mode:
S3 -> standard otg cable -> Powered USB2.0 HUB -> devices (keyboard, usb dac, usb hdd...)
The only catch is that the hub must be powered before you plug in the phone or the phone will try to power the hub and will never enter charging mode. I'm using this setup in my car and it works perfectly. As long as I start the car before plugging the phone, we are good to go.
I only confirmed this works with AOKP JB builds. No idea about other roms/kernels. Hopefully this helps someone.
midirt said:
The problem is that apparently not all of those cable work in terms of charging the phone. People say mostly that it doesn't work. The only guy mentioned success is with the cable I bought, but he then confirmed it with another, more convenient cable. I have the one that needs a USB extension cable to reach the charger, but it's about a buck on ebay, so no problem there. But not all cables work this way: most reportedly will allow you to power USB accessories but not charge the phone.
Click to expand...
Click to collapse
I got mine in the mail today (ordered 10/16) and tried it out as soon as I could. I can confirm it charges and allows for OTG at the same time. This is the auction I bought from: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=251127542280&ssPageName=ADME:L:eek:U:US:3160
Hello y'all. I'd like to ask your attention to this thread, especially but not limited to sonicboom and others, I really could use some help.
I tried going through the forum and couldnt find the answer.
i want to get a dock for the s3/Note2, since they both use the same 11 pin setup, not many have the HDMI output port, in fact ive only seen one. anyways want to get a dock, if the back is a micro usb charging port...can i put the MHL adapter in there, connect the charger and hdmi cable to that? it does charge the device at the same time right?
example is this dock
w.ebay.com/itm/White-Dock-Cradle-Charger-Adapter-Base-Holder-for-Samsung-Galaxy-S3-SIII-i9300-/251126298007?pt=PDA_Accessories&hash=item3a784b3597
and this adapter.
w.ebay.com/itm/New-MHL-Micro-USB-to-HDMI-HDTV-Adapter-for-Samsung-Galaxy-S3-S-III-i9300-i9308-/251165870471?pt=PDA_Accessories&hash=item3a7aa70987
i am NOT interested in syncing with PC.
thanks guys!