Related
My box of Xperia Play didn't include a pouch so I must buy something to protect the phone.
I saw a cool plastic case: http://www.accessorygeeks.com/oem-t...-plastic-silicone-case-ag-xper-py-bk-blk.html and I thought it's good for me, but after a while I realised it turns the phone into a brick, something I don't really want to.
So then another option is to get a pouch, searched and found a few, but pretty expensive ($35 - $60). I just want something good, good looking and for a price of maximum $15.
Optional: An invisible screen protector which theoretical protects the screen for scratches.
I need some help here. What should I buy?
I don't know if you know this but, the Xperia Play comes with a preinstalled invisible screen protector. So you're half covered already.
I can't recommend you a case/pouch since I don't have one but I don't even want to know how bulky it'd be with one when it's on my pocket.
I got the official sony ericsson executive hardcase and i love it - http://www.amazon.co.uk/Sony-Ericsson-SMA7110-Executive-Xperia/dp/B004S5CP0Q
I don't really like the snap on case because I hate adding bulk to an already bulky phone and also I have the DK300 dock and it would require me to constantly take off the other cases.
I also bought the official pouch that came with the European models from here - http://www.netimes.com/shop/sony-ericsson-xperia-play-pouch-ca850-p-3255.html?cPath=70_808
subcu1ture said:
I also bought the official pouch that came with the European models from here - http://www.netimes.com/shop/sony-ericsson-xperia-play-pouch-ca850-p-3255.html?cPath=70_808
Click to expand...
Click to collapse
Off-topic but how trustworthy is that site? I see they have a lot of accessories and ship worldwide, so far I've only used DealExtreme but they don't have many phone-specific stuff (except for the iphone).
Fast and efficient and supply tracked shipping.
I was amazed they had tracked shipping with signature approval for something that was just an envelope.
foofbag
Check this out: (google foofshop)
I bought my macbook sleeve/pouch from there a few years ago and it was awesome for keeping scratches off etc. Then When I got my play I measured up the iphone sizes for their iphone cases and on a whim just bought one to see if my would fit in it. was a bit tight at first but after a while it now fits as snug-as-a-bug-in-a-rug! and it looks cool aswell, hardly adds any bulk and even if it does at least when I pull it out I don't look like I have a brick for a phone but just an awsome pouch/sleeve thing and i pop my phone out of. defo recomend.
So to make sure you guys are aware, if you're up for it, buy the iphone sized one, thats the one I got. They are designed to fit iphones but plays fit fine ;oP lol. They're Australian based but post all around the world, i got mine within a week in the UK.
----mistake----
subcu1ture said:
I got the official sony ericsson executive hardcase and i love it - http://www.amazon.co.uk/Sony-Ericsson-SMA7110-Executive-Xperia/dp/B004S5CP0Q
I don't really like the snap on case because I hate adding bulk to an already bulky phone and also I have the DK300 dock and it would require me to constantly take off the other cases.
I also bought the official pouch that came with the European models from here - http://www.netimes.com/shop/sony-ericsson-xperia-play-pouch-ca850-p-3255.html?cPath=70_808
Click to expand...
Click to collapse
I got the second one with my phone. I generally hate phone cases but this is nice since it's not making a brick out of phone and it's not taking away it's style. On the left is a cut-out so the headphones plug isn't covered, and it makes easier to take out the phone.
Pouch on first link is a bit ugly.
bought a cheapy gel case of Amazon and noticed there is not openings for the stereo speakers , I just looked at the case in post 1 and it has not speaker openings as well
This item, on ebay, has the speaker ports open, and is slimmer, and better than the Gel one I tried:
Search for that item number: 190527208284
I've got one of these, and it's well worth a few quid more.
Your case looks like the one i was going to order from Amazon for £2.99 , but is only £1.99
Thanks
John.
RottenFoxBreath said:
This item, on ebay, has the speaker ports open, and is slimmer, and better than the Gel one I tried:
Search for that item number: 190527208284
I've got one of these, and it's well worth a few quid more.
Click to expand...
Click to collapse
lol..It's a nice case, fits well, is slimmer than the crap one I had(prepaymania £2 gel case, and another from local phone shop, both identical to be honest), and I had given up on cases for it, as well, I thought most were the same(people even have issues with otterbox, etc..)
It's semi transparent, and it allows the sliding motion well, better than the other two I tried, i felt they were prising the phone apart, but this one isn't an issue.
well worth £1.99, IMO.
Cool stuff
Sent from my R800i using xda premium
Hi All,
I just ordered this case for my wife's A100.
http://www.amazon.com/gp/product/B0060N4OIK/ref=oh_o00_s00_i00_details
I have a case for my A500, from the same manufacturer, that I am very happy with.
Should get it later today. I can post my thoughts on it once it arrives if anyone is interested.
Wow, this case looks excellent--just like the one I had on my Transformer. Thanks for posting!
Just e-mailed seller, no shipping to Canada, and no equivalent cases on eBay
KevOne said:
Just e-mailed seller, no shipping to Canada, and no equivalent cases on eBay
Click to expand...
Click to collapse
Just wait, when they are new it just takes some time.
How is this only $15????? And eligible for Amazon Prime, too!
This case is absolutely phenomenal.
Feels like you're holding a dense leather rectangle of quality.
-Fit and finish is perfection
-Thing is completey rigid (no twist or slop-- unlike those bezel-covering slide-in-pocket flip cases)
- Stand is solid and stable
- The clasp mechanism feels fantastic (really, when this thing is closed, it feels locked down).
- Protects the screen, back plastic, and corners. Seems to offer about as much shock/crush/drop protection as any case I've ever seen, yet adds very little in the way of bulk and mass.
- Access to all ports/plugs
Can't exaggerate how much I love this case. Protection factor aside, the thing simply makes me like using my table more.
Thanks for the review! Definitely going with this case now.
Sent from my HTC Inspire 4G using Tapatalk
Glad to hear my review was useful--post back with your impressions of the case when you get a chance.
[email protected]! I waited too long and Amazon is sold out with no restock date. There are several cases out there, but the Blurex was the only one I saw with corner clips instead of the chunky looking leather frame.
I contacted Blurex to see if there were any other resellers, and they said that it would be back in stock on Amazon shortly. A few hours later, and it's back in stock!
how sure are you that it would help survive a fall while open and in use...looks like it would pop out...
trying to decide between thsi and
the acer bumpter case
http://us.acer.com/ac/en/US/content/model/LC.BAG0A.070
Depending on height of fall and hardness of contact surface, I'm not sure I'd bet on a pane of glass in any case, but the Blurex's corner-clips do hold the tablet with some serious authority. It'd take some funky, but not impossible, physics to pop it out.
The bumper case you linked to looks like what I had in mind before going for the Blurex offering. I figured the small form factor made the A100 more like a reach-for-it-and-go phonelet than a full tablet, so I wanted a hard, snap case with no flap to contend with. When using the tablet in portrait, I'll occasionally get annoyed with the folded-back flap, but the more complete protection and premium/professional appearance/feel of the Blurex case more than make up for it.
I received the Blurex case mentioned by the OP yesterday.
Quite frankly, I have not seen any case fit any device better.
It significantly reduces the amount of bulk the "OEM" case has;
Because it basically has *no* sides, it does not have the OEM case's problem of ports not lining up quite right; and
Its material seems higher quality and is easier to grip in my opinion.
Also, under current (not Black Friday) pricing, it costs only half as much.
Very nice case i like it
Sent from my A100 using xda premium
I received the blurex case today, ordered based on what I read here.
It does seem well-made and I very much like that it adds very little to the dimensions and weight of the A100.
At first the clasp that closes the cover annoyed me when holding it open in portrait to read like a book. (I use Kindle frequently.) The sharp corner dug into the side of my finger.
Then I got out a nail file and just lightly softened the one corner and that pretty much took care of the problem.
As a result, the rounded clasp actually works as a finger hold to grasp the tablet in one hand without putting my thumb on the screen. (See photos.)
Overall, it's a pretty good addition.
I ordered mine last night. I hate the actual case that acer puts out. Cant wait for this one to come in...
My BluRex case arrived yesterday, and it's even smaller than I expected. It a very nicely made case (especially for the price), and fits like a really tight glove (insert OJ joke here). My only concern is that the clip that holds the cover closed might wear through the finish on the side of the tablet over time. Otherwise, great case! Highly recommended!
DaveRichardson said:
Depending on height of fall and hardness of contact surface, I'm not sure I'd bet on a pane of glass in any case, but the Blurex's corner-clips do hold the tablet with some serious authority. It'd take some funky, but not impossible, physics to pop it out.
The bumper case you linked to looks like what I had in mind before going for the Blurex offering. I figured the small form factor made the A100 more like a reach-for-it-and-go phonelet than a full tablet, so I wanted a hard, snap case with no flap to contend with. When using the tablet in portrait, I'll occasionally get annoyed with the folded-back flap, but the more complete protection and premium/professional appearance/feel of the Blurex case more than make up for it.
Click to expand...
Click to collapse
great! thanks so much for the quick reply...after receiving the unit, and looking at it ocmpared to the car mount we have, think this case will be perfect for it.
Out of stock
It appears that Amazon is out of these... I've checked a couple dozen Google links for the case and they all lead back to the Amazon "out of stock" page.
Anyone know of another source for these cases?
Thanks.
Blurex was out of stock, but stumbled across this at Bureau En Gros.
Acer Portfolio, has a carbon finish and similar looking to the Blurex though not as slim as the Blurex.
All the ports and camera holes fit great. This model doesn't have a smell that i've read in other threads. It doubles as a stand too.
Cover holds down by a magnet, so no intrusive or wailing clasp.
Check out the attachments.
p.s. i had initially posted this in the A500 / A100 case thread, my apologies for double post
So Nolan, do you like the case?
Sent from my MB855 using XDA Premium App
Well as you can see from my Signature I am kind of a accessory freak. I ordered several new cases, and screen protector, and a few of them are coming today. I will review as they come in. I ordered a Black, a Blue, and a Red Poetic Leather Stand Cases. I loved the one I got for my Galaxy Tab that I knew I wanted one (or more) of the same case for my Fire, and since they come on several color options I couldnt resist.
I also ordered a Black MiniSuit TPU , and a White BlueCell TPU . All 3 of the Poetic cases are coming today so I will most likely review them later today.
Ok, a little later than I had mentioned, but never the less heres a short review of the Poetic Leather Cases, and the White TPU, the 2nd black TPU (Minisuit) comes later today.
Poetic Leather Cases: All 3 of the stand cases are the same except for the color (Black, Red, and Blue), so Ill just review one and post pics for all of them. The fit is perfect, holds the Fire in place very well, and the hook that keeps it closed is very secure. There are 3 standing positions that you can use, and they are all in landscape. This isnt one of the 360 degree kind that will work in portrait also. All of the ports are easily accessed, and just like on my Gtab 7.7 only one of the speakers is just slightly covered (see picture #7). The stitching is well done, and the whole case seems very durable so far. I originally bought one of these type for my Gtab 7.7, and liked it so much I bought 3 for my Fire .
Recommended: YES
TPU Cases: I ordered 2 TPU cases recently, and already had one from a previous Fire and so far one fits great, one not so good, and one gets delivered later today. Theres really not a whole lot to say about these because they are pretty simple. But I will post links, and explain which one fits, and which ones dont.
The first one I bought is here. So far its the one I use the most because of how well it fits. Snug like it should be, all ports easily accessed, no blockage.
Recommended: YES
The second one I got is here. This one doesnt fit right. It doesnt seal to the edges like it should, has that slight bulge of the sides, and the usb port cut out is too small. The stock charger usb doesnt go in right when the case is on. Not much else to say on this one.
Recommended: NO
The last one that will arrive later today is here. I have high hopes that this one will fit great because its a Minisuit brand, and Ive got a leather Minisuit Stand case for my Gtab 7.7 that is great. I will update this review soon with the Minisuit Black TPU.
Recommended: TBD
Well since I ran out of room for picture slots in the first post Ill post the Minisuit Black TPU review here.
This one fits a lot better than the white one, but not quite as good as this black one that I had bought for a previous Fire I had. It may just be that its new though and needs to wear in. It just slightly sticks out a little too far on the bottom rather than snugging up to the edge. Now this could be considered good or bad depending on how you look at it. It goes on and comes of easier if your a glass half full type, but if your a glass half empty person than youll notice it. So I guess that explains which one I am. I do like the X pattern on this new one more though. Its a slimmer X, with the rest having a kind of carbon fiber look. Ive got a clear one just like it on my Gtab 7.7 with another set of 6 on the way. $16 for 6 different color TPU cases cannot be beat. I will however have an extra pink one sitting around.
Anyway I highly recommend this case if someones looking for a nice and cheap TPU for their Fire. Pics attached.
case reviews
Hi Gam3r 4 Life,
Thanks for your review. I've just bought a case, but it's a bit bigger than i expected. Even if the size of it, it's hard to switch the KF ON, when it's in the case. Pictures are here.
What i wanted to buy is this one, but unfortunately the seller isn't posting to Hungary.
esox_hu said:
Hi Gam3r 4 Life,
Thanks for your review. I've just bought a case, but it's a bit bigger than i expected. Even if the size of it, it's hard to switch the KF ON, when it's in the case. Pictures are here.
What i wanted to buy is this one, but unfortunately the seller isn't posting to Hungary.
Click to expand...
Click to collapse
Your first link didnt work when I tried it. But I agree, the power button is slightly recessed.
case
Picasa 3.9 has some "new" feature...there is no create webalbum button any more. There is a "nice" big gree button for Share....
Anyway here is the direct link for my webalbum about this case:
https://picasaweb.google.com/113442946972614822221/Kfc#slideshow/5734665025626575714
I own this:
amazon.com/Gumdrop-Cases-Series-Protective-Kindle/dp/B006K120UG/ref=sr_1_21?s=fiona-hardware&ie=UTF8&qid=1336054235&sr=1-21
At the time, it only came in Black. Seems to be a couple new colors now. It also came with a screen cover. But I found the cover got much dirtier then the regular kindle screen.
I used a knife to pry off the "plastic" screen, which was just attached with some heavy-duty double sided tape. The case comes in 3 pieces. You can choose to just leave the entire piece off that the plastic screen is attached to. but there is a noticeable gap and its visually unappealing.
Very happy with this. It adds some weight, some size. Oddly enough, the biggest PITA was having to pen the flap for the USB/Power to verify the orange light when loading into FFF. With Hash's new FFF, you get the prompt on the screen .
I had a poetic type case for my transformer prime (Blurex Brand). I picked one of them up for the Fire and it should be here today as well. Only $8.99.
http://www.amazon.com/Kindle-Leathe...1?s=electronics&ie=UTF8&qid=1336156415&sr=1-1
Looks the exact same.
There have been a few threads linking to the Shenit TPU Bumper Case that have kinda died out because, well, it's no longer available on Amazon despite having been available long ago with a very future ship date. I ordered mine when the listing first went up on Amazon and it just arrived today! Here are my observations and judgments:
The Details
The case is made from two materials: TPU and a hard plastic. You can see the two materials in the photos on Amazon. It's done in a way that is still incredibly low-profile. The TPU covers all buttons, corners/edges, and ports (not the camera lens nor camera light, though). The hard plastic covers the back, the back corners, and some of the sides. The hard plastic is a *perfect fit* over the camera lens ring - from the back of the phone it is 100% impossible to tell the color of my phone.
Something that can be very clearly seen in the photos, and is the same with the official bumper, are the angles at which the sides have. This causes the feeling that the back edges of the phone "stick out". This seems to be a love-it or hate-it thing for most people. I'm torn about whether I like it or not - it definitely seems different than what I'm used to. That said, this was by no means a surprise for me and I expected it to be just like this. So in my Pro/Con list, this is what I'm talking about with the "back corners sticking out".
Oh, and it came with a piece of red velcro for some reason!
The Good
Overall, it's a very nice and snug fit on the phone yet it's not terribly difficult (also not terribly easy, in a good way) to get it off of the phone. With this case on the phone, I'm certainly not concerned with the phone slipping out whether pulling the phone out of a purse with something tugging on the case nor with skinny jean pockets or anything else. The feel of it is a mix of a TPU feel and a "soft" feel for hard plastic (think the feel of the back of the black version of the Nexus 5 to mean what I mean "soft" for hard plastic, not Quicksand case "soft"). Nobody will have problems with this slipping in and out of their pockets nor is it incredibly slippery either.
For protection, this provides the protection you would hope from a TPU case and not much more. As you can see in the photos, every corner and edge is covered by TPU including the four corners on both the front and back as well as the edges along both the front and back of the phone. The back of the phone, however is only covered with the hard plastic. Take a look at the photos and you can tell where the TPU ends on the insides of the case and where the hard plastic begins on the outsides of the case. This case might protect your phone from a drop and it might not - just like with all TPU cases. If you buy this and you play first-person shooter games where you can change your armor out, this case could be thought of as light armor or perhaps medium armor but no where near heavy armor.
It is definitely an attractive (and Nexus branded!) case that doesn't look like what many of the other $14 cases out there look like. As you can see from the photos, the case is molded perfectly to fit with the camera ring cutout. Speaking of the camera ring, the case is just a tad thicker on the back side than your camera ring so if you lay it down on the back, your camera ring is no longer a protrusion. This may have some implications for those of you with magnetic accessories for the camera ring but I can't really comment much on that. Ultimately, unless you look at the port cutouts or see my white speaker on the front, this case makes it impossible to tell the color of my phone - that's how perfect the molding is for the fit. The ONLY flaw I could find with the case's fit was for the microphone on the top of the phone. The microphone isn't perfectly centered in the hole but it's also not covered either.
The Bad
There are three primary problems I have with the case.
First of all, a quick browsing at the time I wrote this turned up quite unfruitful in actually identifying where you can even buy this case today! It is now listed as unavailable on all of the Amazon postings and even all of the eBay cases that look just like the OEM bumper case have seemed to vanish. I'm curious if you can even buy this case anymore as I couldn't find it anywhere now!
So here's the first knock on the case: The buttons have a mushy feel with terrible feedback on the power/volume buttons. We all know that cases tend to be Good, Meh, or Bad here and this case definitely qualifies as bad. Sorry!
And the last thing:The USB Port cutout, while appearing quite large, is unfortunately too small for a variety of USB cables. The first 3 USB cables I randomly grabbed didn't fit comfortable in the space provided although the fourth one did. So you'll have to find a cable that will fit in there if you ever need one and don't use Qi for all of your charging needs.
Pros:
Nexus Branded!
Plenty of color options and cheap (it was $14 shipped from Amazon)
Great snug fit with perfect molding to the phone
Feels like you hope it would feel from the photos
Very low profile - better than your typical TPU case (except for the back corners sticking out)
Plenty of room around the 3.5mm audio port.
Won't affect NFC, Qi, or radios
Cons:
Hard to buy (no longer on Amazon and the eBay lookalikes are no longer listed either)
Took a month to ship
Bad button tactile feedback
Many USB cables won't fit in the cutout for the USB port
I hope you enjoy!!
Sent from my Nexus 5 using Tapatalk
I just got mine today too. I got the blue one. Does it feel like pyramid shaped to you? Mine does. The back is thicker than the front. Buttons are not that bad. Better than some of the cheap tpus. I can still see some white bordering the camera in the back. Not too bad a case. But the shape is weird. Does the original case have that pyramid shape? If you hold it by the sides you cab definitely feel that the back is wider than the front (lip).
Sent from my Nexus 5 using Tapatalk
Just added the more thorough review and several photos. Hope you guys enjoy! Feel free to ask any questions you might have!
guapinoy said:
Does it feel like pyramid shaped to you? Mine does. The back is thicker than the front. <<snip>> But the shape is weird. Does the original case have that pyramid shape? If you hold it by the sides you cab definitely feel that the back is wider than the front (lip).
Click to expand...
Click to collapse
Yup, I commented on this in my more thorough review. It's different than I'm used to but exactly what I expected from the photos on Amazon (and Google's OEM listings/reviews as well). I still don't know if I like it or not. Like you said, it's weird.
guapinoy said:
Buttons are not that bad. Better than some of the cheap tpus. I can still see some white bordering the camera in the back. Not too bad a case.
Click to expand...
Click to collapse
If I compared this to the worst TPU case I've ever had (and I've had some bad ones) that was rated as a 1 from 1-10, then I'd give this case a 2. You're right, there is worse. But not much worse - it's pretty bad. Maybe your blue one has slightly different buttons than mine but mine is pretty bad.
For the white around my camera on the back, I can't see any white whatsoever. At least I don't think I can even as I'm trying to look for it although I guess it's possible that the white + shadow makes it blend in with my light gray case. I don't see it, though.
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Onismurai said:
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Click to expand...
Click to collapse
That looks like the same case but is definitely different packaging than what I received. Thanks for the link though, I was unable to find those on eBay when I tried yesterday.
Onismurai said:
Even no longer available but there are some cases like this in eBay if anyone would like to give it a try: http://www.ebay.com/itm/GOOGLE-PREM...Cell_Phone_PDA_Cases&var=&hash=item3cdc425b73. But don't expect too much as this is chinese stuff. And Play Store now available for $26~ after 25% off (still got shipping fee+ tax).
Click to expand...
Click to collapse
Uhh have you seen what most people have been saying about the official bumper? It's a low quality POS for the most part. Not worth full price, and even at $26 it isn't worth it with the peeling, staining, etc. Doesn't matter if it's from the play store. The unofficial ones might even hold up better, who knows, but the standard Google set with the official bumper case isn't exactly high. Besides, there's extra colors with the unofficial ones that some people might enjoy.
Anyway, if anyone still wants these ones I did find a link for super cheap. Of course it will probably take 3 weeks to a month to get to you, which is the case for most things shipping from overseas. But $12.99 shipped should make up for it. The Nexus logo is printed in a different color than the case on some of the color choices (just scroll down on the page to see).
http://www.aliexpress.com/item/For-LG-Google-Nexus-5-bumper-case-FREE-SHIPPING-front-screen-protectors/1612944308.html
God, it can't be any worse than the official bumper. I wish we had a better selection of actual bumper cases.
I'm using the Gray bumper clone for couple days. No staining (yet) , nice soft touch. Back panel is a bit bigger than front (as mentioned in 1st post).
I also have glass protector from Nillkin on, the case doesn't seem to push the glass.
Update: Now it has some blue from my jeans. sigh..
I may certainly be wrong but I'm beginning to think these unofficial cases are the same as the official ones, same manufacturing line and everything.
Sent from my XT1053 using Tapatalk
When I bought my nexus 5 I wanted a pouch, but really didn't find any to my liking . Last week I decided re-search and found a couple real good pouches, but really none what I had in mind. Then I came across a MediaDevil Artisan pouch, didn't really know what to think, like if it was going to be a cheap knock off or bad quality. As I looked into it I found out that this company makes very high quality pouches that I was never aware of. I decided to give it a shot based on amazing reviews. It came in a nice black gift like box and very professionally packaged . Has full grain leather with red stitching ( believe it comes in different colors), the phone fits perfectly in the pouch nice and snug. Not to tight and not to loose. It has micro fiber feel inside of it so when you slip you're phone it cleans the smudges and fingerprints. I would recommend this pouch to anyone who wants a nice look to there phone.
This is my first review so it might not detailed or organized in any way.
dia_naji said:
When I bought my nexus 5 I wanted a pouch, but really didn't find any to my liking . Last week I decided re-search and found a couple real good pouches, but really none what I had in mind. Then I came across a MediaDevil Artisan pouch, didn't really know what to think, like if it was going to be a cheap knock off or bad quality. As I looked into it I found out that this company makes very high quality pouches that I was never aware of. I decided to give it a shot based on amazing reviews. It came in a nice black gift like box and very professionally packaged . Has full grain leather with red stitching ( believe it comes in different colors), the phone fits perfectly in the pouch nice and snug. Not to tight and not to loose. It has micro fiber feel inside of it so when you slip you're phone it cleans the smudges and fingerprints. I would recommend this pouch to anyone who wants a nice look to there phone.
This is my first review so it might not detailed or organized in any way.
Click to expand...
Click to collapse
I cannot seem to find the link on amazon. Would you be able to post a link
vinnyfraser said:
I cannot seem to find the link on amazon. Would you be able to post a link
Click to expand...
Click to collapse
http://www.amazon.com/MediaDevil-Google-Nexus-leather-stitching/dp/B00GXJHRG2/ref=sr_1_3?ie=UTF8&qid=1392307452&sr=8-3&keywords=mediadevil+nexus+5
I have the same pouch, i fell in love with!
More pics
Well worth the money
Sent from my Nexus 5 using xda app-developers app
I am not a pouch person, but that does look nice! Love the logo!
cool review... the black-red looks awesome. i have one with the teal color.
dia_naji said:
Well worth the money
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
does it use a magnet on that button on the back of the case ? thanks
fkloznica said:
does it use a magnet on that button on the back of the case ? thanks
Click to expand...
Click to collapse
It does. Circular shaped magnet can be seen at the photos embossing under the leather and one of the online reviews confirms it
Review: pull out tab that works brilliantly and is held in place by a small magnetic clasp.
Click to expand...
Click to collapse
dia_naji said:
I would recommend this pouch to anyone who wants a nice look to there phone.
Click to expand...
Click to collapse
Thank you very much for this review dia_naji!
On your pictures I see you have the black with red stitching case, and inside you have a black phone?
On Media Devil's webpage it says that the black phone is different size to the white or red, therefore they sell cases for black and cases for white/red. And for the black phone there's only one option, grey with pink stitches, not my cup of tea. The case you show on your pictures is meant to be for the white/red phone only. When I first saw this I was sceptical at them, because both phones are the same size, only thing different is the plastic texture.
Can you or anyone else on this thread confirm that you're using a black case with a black phone? Despite the big red warning on Media Devil's website: http://mediadevil.com/us/artisanpouch-leather-pouch-case-google-nexus-5-by-lg.html
Thanks!
the difference, as I've been told by their employee, is the the material used inside, because of the texture difference and the material of the pull-out ribbon, as well as the size of the pull-out knob.
-V-O-Y-A-G-E-R- said:
the difference, as I've been told by their employee, is the the material used inside, because of the texture difference and the material of the pull-out ribbon, as well as the size of the pull-out knob.
Click to expand...
Click to collapse
I thought it would be something like that....
My question remains, is anyone using the black case with a black phone? If so, any downfalls?
I asked Mediadevil about the difference between black and white/red nexus 5
Hi Marius,
I hope you are well and thanks for getting in touch.
The black and white Nexus 5 have a slightly different curvature, and as our cases are designed to fit very snugly to the device itself, this means that a black Nexus 5 will not fit into a case designed for a white Nexus 5. In addition, the black Nexus 5 has a soft-touch back as opposed to the harder plastic back of the white Nexus 5, which adds friction when it is being inserted and removed from the case, and we have also had to take this into consideration when designing a case for the black Nexus 5.
At the moment we are completely sold out of all colour combinations for the black Nexus 5 except for the slate/pink option, however we do have new cases in production, which should be available by the middle of March. I'm afraid I don't have a definite release date at the moment, however please feel free to get back in touch in a week or so, as we should be able to give you an update then!
Sarah
MediaDevil
it's almost a copy paste answer they give
Cowboy_Henk said:
I asked Mediadevil about the difference between black and white/red nexus 5
Hi Marius,
I hope you are well and thanks for getting in touch.
The black and white Nexus 5 have a slightly different curvature, and as our cases are designed to fit very snugly to the device itself, this means that a black Nexus 5 will not fit into a case designed for a white Nexus 5. In addition, the black Nexus 5 has a soft-touch back as opposed to the harder plastic back of the white Nexus 5, which adds friction when it is being inserted and removed from the case, and we have also had to take this into consideration when designing a case for the black Nexus 5.
At the moment we are completely sold out of all colour combinations for the black Nexus 5 except for the slate/pink option, however we do have new cases in production, which should be available by the middle of March. I'm afraid I don't have a definite release date at the moment, however please feel free to get back in touch in a week or so, as we should be able to give you an update then!
Sarah
MediaDevil
Click to expand...
Click to collapse
Thanks very much for sharing this! Now that makes more sense. I think I'd rather wait for 2 or 3 weeks. I'll buy a cheap neoprene pouch case in the meanwhile.
dia_naji said:
When I bought my nexus 5 I wanted a pouch, but really didn't find any to my liking . Last week I decided re-search and found a couple real good pouches, but really none what I had in mind. Then I came across a MediaDevil Artisan pouch, didn't really know what to think, like if it was going to be a cheap knock off or bad quality. As I looked into it I found out that this company makes very high quality pouches that I was never aware of. I decided to give it a shot based on amazing reviews. It came in a nice black gift like box and very professionally packaged . Has full grain leather with red stitching ( believe it comes in different colors), the phone fits perfectly in the pouch nice and snug. Not to tight and not to loose. It has micro fiber feel inside of it so when you slip you're phone it cleans the smudges and fingerprints. I would recommend this pouch to anyone who wants a nice look to there phone.
This is my first review so it might not detailed or organized in any way.
Click to expand...
Click to collapse
I'm very interested in this leather pouch. But is this compatible with a tempered glass screen protector (0,30mm) AND with the toastMade (real wood) skin
I hope the pouch is not too tight for this? Or will it stretch over time? And what must I choose? Black or white/red version of the pouch, because Mediadevil said there is difference in size and material they use, but this is wood material so....???
Sorry to bump an old thread. I'm looking at this case for a Black Nexus 5.
Does this pouch cause the soft touch back to wear out from constant friction from inserting and removing the phone from the pouch? Especially near the bottom where the pull tab makes contact.
I had a similar type pouch for the Galaxy Nexus, and that worked fine for the plastic material on the phone. But seeing the Nexus 5 has a soft touch back I can see the friction causing wear. My Lenovo ThinkPad had a similar annoying issue as I found the rubberish soft finish was coming off from the sleeve I had it in.
Bump! Still would love to hear feedback from owners of this case. Just got my Nexus 5 and I'm looking for a nice pouch!
da_hool said:
Sorry to bump an old thread. I'm looking at this case for a Black Nexus 5.
Does this pouch cause the soft touch back to wear out from constant friction from inserting and removing the phone from the pouch? Especially near the bottom where the pull tab makes contact.
I had a similar type pouch for the Galaxy Nexus, and that worked fine for the plastic material on the phone. But seeing the Nexus 5 has a soft touch back I can see the friction causing wear. My Lenovo ThinkPad had a similar annoying issue as I found the rubberish soft finish was coming off from the sleeve I had it in.
Click to expand...
Click to collapse
Well I have had mine for almost 3 weeks after reading this thread. I LOVE it. I got the gray/blue color and it looks great with my white n5. I use it hard and it has shown next to no wear in the 3 weeks I've had it. It is still as tight as the day I got it and wouldn't be able to be pulled out on it's own without the pull strap. Time will tell. Definitely no extra room for a TPU or similar case.
Side note: As pictured below, you can see one of the stitches wasn't tied off correctly and came undone just two days after using it. I think I curbed the unraveling by melting the end of the thread with a lighter. It hasn't moved since. I emailed Mediadevil through Amazon.com (where I made the purchase) and they had a new one out to me next day. Excellent customer service.
5 out of 5 stars would recommend to anyone.
Not a pouch person but this looks tempting
Sent from my Nexus 5