Hey all.
I've rooted my Sprint Galaxy S3 (SPH-L710) and gotten my PS3 sixaxis controller to connect via bluetooth to my phone.
In different emulator apps I've tried to map the buttons of my controller to work for those apps.
In each of my button mappings, all buttons and the left joystick were mapped of the bat with no problems.
I assumed it was just the controller itself, though, when I synced it back up with my ps3, both analog sticks worked perfectly.
So this brings me to the conclusion that the problem is not with the controller.
Anyone got any idea how to go about fixing this?
Any help would be greatly appreciated, thanks all.
Edit: When swapping the axis' in the Sixaxis Controller app, I can remap the right stick swapping the x axis with the z axis and the y axis with the rz axis.
So when I swap those axis from the left stick to the right, I can then use the right stick in my emulator apps and other games.
In essence, I can only get one of the sticks working at a time.
Thanks again.
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Related
First off I apologize if this is in the wrong section. I hope some one on here can help me, though, with the problem I am having. I have my PS3 controller connected to my Note 2 via micro usb to mini usb connector(The one included with The Gameklip). I bought it mainly for emulators, but I am having a problem setting up anything with the right analog stick(RS)
FPse(playstation emulator)- In button mapping, I can set all the buttons, including the LS, but nothing registers with any direction on the RS. The R3 button works but that is all.
n64oid(Nintendo 64 emulator-also tried MegaN64 same result). Pretty much the same deal with FPse. I wanted to set the C-buttons to the right analog but no dice. Also another problem arose. Both D-pad and the Left analog share button mappings, and I can't seem to separate them. Anyway to fix this?
I tried Dead Trigger, GTA III, and Shadowgun and the right analog worked perfectly fine, so I know it's not the controller. I've looked in countless topics on here and other forums but most of the solutions involve the Six axis app which only works with the controller connected via bluetooth-root required, but not connected directly, like I have.
Has anyone been able to get their right analog stick working in any emulators? Thank you for your time, and thanks in advance.
Bump. I also wanted to mention that while the controller is plugged all 4 of the lights on the ps3 controller are lit up and slowly blinking. Not sure why it just doesnt have the "player 1" light on
Bump. This problem has been plaguing me on multiple devices.
Having same problem, just need to find a 64 em that allows custom control mapping maybe?
I Love my DS4 Controller with the Fire TV. But I've been having an issue where in some apps the buttons aren't mapping correctly or not usable at all.
Im also having issues with using more than one controller at the same time. The buttons on either controller map as the same input and both controllers only control player one. This happens both through Bluetooth and wired
I know we currently do not have IME support yet even with root, but i was hoping for any suggestions that may help with this.
Thanks!.
Hi, I've got the d855 g3, I play games on it a lot, a while back I tried using a keyboard and mouse to play gta San andreas, it sort of worked, except for the mouse which just made me keep spinning. I got a wired xbox 360 controller recently and plugged that into my phone. It worked, I tried San andreas again but I had no control of the direction I'd be looking, the camera was circling my character. So then I tried modern combat 5, it didn't work either, it just looked up, whilst all my other buttons and controls worked. Any help would be much appreciated. Thanks!
You can use Sixaxis app with a PS3 controller (Bluetooth) and it will work natively without setting up a controller profile.
Sent from my LG G3
That's not really what I meant, it's noth8ng to do with the controller profile, every controller just looks up, whether it's the mouse and keyboard or my wired xbox controller, I dint have a Sony console, so buying a dualshock would be a waste. Have you got a fix for the looking up problem?
Anyone else?
Nvm worked it out.had to enter some type of code onto a terminal emulator. Search it on xda forums if you need it.
I know this is the m8 forum but there isnt one for the m8s.
So the issue is, my ps4 controller connects fine, but the button layout is whack and pressing the right trigger for example also moves the analogue stick according to the phone, this makes playing games with it (using services like moonlight) impossible since I cannot remap the buttons properly or even use the triggers. My wired xbox controller wont work either, the ring keeps flashing and no input is sent to the phone.
Im rooted so if anyone has fixes for either of these issues (preferably the xbox controller one) it would be greatly appreciated
hi, can I use the ps4 control with the BlackShark2? tnks. :good:
SePudrioLaMomia said:
hi, can I use the ps4 control with the BlackShark2? tnks. :good:
Click to expand...
Click to collapse
Yes and no. Ds4 works perfectly outside of shark space (the gaming mode) with zero issues.
With sharkspace enabled the ds4 looses connection and fails to reconnect untill sharkspace has been disabled/quit.
We can load sixaxis controller app from inside sharkspace, so in the future with root access (we currently don't have root) it should be usable in its gaming mode. But at present your going to have to play without one of the black sharks main selling points if you want to use your dual shock for.
This is also the case for all my 3rd party controllers, one user has claimed success with an ipega controller, but I've not got one to test, note planning on getting one.
The official controllers for the blackshark 2 are probably going to be the best option for full compatability unfortunately
Thanks bro!! I appreciate the time and dedication in the response, greetings. Maxx.-
Which controller have you guys tried? I tried my wireless controller using otg but seems like it doesn't recognize otg connection ?
Rishabh1x said:
Which controller have you guys tried? I tried my wireless controller using otg but seems like it doesn't recognize otg connection
Click to expand...
Click to collapse
I've tried a DS3, ds4, c.t.r.l and a nvidia shield bt controller, none worked inside sharkspace all worked outside.
I also manually changed the master addresses of the controllers aswell via a pc to match the blackshark2 with no success, tried various gamepad mappers also with no success.
As above there's a post on here somewhere someone recogned the i.p.e.g.a controllers work but personally I am not willing to buy one to test, maybe if someone with a legitimate blackshark2 controller would mind sharing the master bt address the controllers use we could use a pc to change our controllers (ds4 etc) to match, and maybe the blackshark would recognise our Bluetooth controllers as the official ones in sharkspace and stay connected.
That's my only other suggestion/idea untill we have Root access, and even then if they connect and they still probably won't, I dunno if there would be input issues caused as a result of the hardware not matching the software
As far as your otg controller is concerned does it connect and function as intended outside of sharkspace?
It doesn't work at all using otg. It says charging device ?
Just tried again, so my controller has two config dinput mode and xinput mode. Turns out one of them works and the other is not recognised. I think the xinput mode is what works and when I switch to it the controller works outside and inside shark space as well. Although, the button are a bit wrong but i remap them in game and i can play fortnite without any issues. I will still buy the black shark gamepad 2.0 though.
Your absolutely correct buddy thank you.
Dinput controllers such as the ds4 are not working inside sharkspace.
The nintendo switch joycons use xinput and work with the blackshark inside sharkspace. I did notice some input lag on the joycons but to be honest I wasnt playing the best game to test a controller. The switch pro controller also uses xinput so will assume that works aswell, but again not got one to test.
I have the Black Shark Gamepad 2.0, which is unfortunately a bit of a disappointment. It has some very strange aspects to it: Y button cannot be mapped in Shark Space mode, it acts as some toggle between touch screen emulation and mouse cursor mode, which I don't understand why someone would use that. It's useless to me as someone who wants it solely for emulators.
When used outside of Shark Space mode, the DPad and the lettered face buttons both register as the same thing A/B/X/Y buttons. Also, the right touchpad does not act like a stick, instead it acts like a mouse.
On top if this, there are no start, select or L3/R3 buttons. This amounts to playing in Shark Space mode leaving you 5 buttons short of a full controller and outside Shark Space to playing 8 buttons short.
I could get the master BT address for you but I am not exactly sure how to do it. Do I just need to pair it to a PC and do... what?
Has anyone tried using the Xbox 360 controllers