Develop Bugs

SIM Unlock problem!

Hey guys,
I recently called T-Mobile and asked for an unlock code for my Dash, but when I received it I got my friends SIM card to try and it said the code was incorrect. I typed i *#06# on my phone and the IMEI matches the one I gave them, so does anyone know what the problem is? I recently installed Kavana's 6.1 ROM, so would that be a reason why? Thanks!

MKDaMan1818 said:
Hey guys,
I recently called T-Mobile and asked for an unlock code for my Dash, but when I received it I got my friends SIM card to try and it said the code was incorrect. I typed i *#06# on my phone and the IMEI matches the one I gave them, so does anyone know what the problem is? I recently installed Kavana's 6.1 ROM, so would that be a reason why? Thanks!
Click to expand...
Click to collapse
The 4-digit PIN code on a SIM card is something different to a SIM lock - which code are you talking about?

I'm talking about an 8-digit unlock code I got from T-Mobile. I borrowed my friend's SIM (which is a Cingular SIM) so I could test to see if the unlock code worked, but it didn't.

MKDaMan1818 said:
I'm talking about an 8-digit unlock code I got from T-Mobile. I borrowed my friend's SIM (which is a Cingular SIM) so I could test to see if the unlock code worked, but it didn't.
Click to expand...
Click to collapse
The unlock code sent from T-Mobile should've worked... The only thing I could recommend would be to double-check the code they sent you. Make sure it's the same one you're entering. You said that the IMEI that pulled up after entering *#06# is the same as the one you first gave them. That should eliminate the IMEI as a potential problem.

I ran into this when I unlocked mine... What I ended up doing was rebooting, entering in the code with My T-Mobile SIM in, then switching to an non T-Mobile SIM after the unlock to make sure it was unlocked.. it was.

Bupahs said:
I ran into this when I unlocked mine... What I ended up doing was rebooting, entering in the code with My T-Mobile SIM in, then switching to an non T-Mobile SIM after the unlock to make sure it was unlocked.. it was.
Click to expand...
Click to collapse
How do you enter the unlock code while using the T-Mobile SIM??? I always knew the phone to need a SIM of a different carrier.

Yeah I wanna know that too... I really want this thing unlocked! I appreciate all the help.

I should have been more clear. Reboot the device with the other providers SIM, the simlock dialog should kickin, then before you enter in the code take that SIM out and put yours in, enter the code then switch the cards again.. Thats how I got mine to work.
I used a Nextel SIM if it matters.
I've also heard that there has been success with a program called DASHv2Unlock, it forces the device into the simunlock mode without a forgien SIM in it. I was going to hunt it down but my method ended up working in the end

I was trying to change the theme on my shadow to shadow sliding panels.zip.However was promoted to load celecmd on my storage card and run the cmd. I don't know how to proceed from there cos i am not familiar with the cmds.Pls can somebody help me with this thing by outlining the cmd on this postp.i will appreciate the efforts from some one.

[Q] Repeated "network unlock request unsuccessful" message even after unlocking

[Q] Repeated "network unlock request unsuccessful" message even after unlocking
[Note, I do not have root (it caused too many weird glitches and I missed OTA updates).]
I have the Samsung Galaxy Nexus GSM originally locked to O2 UK. Months ago they provided me an unlock code and unfreeze code. When I entered it, the phone unlocked. But often, when changing SIM cards, I'd need to enter the code again. No big deal.
A few months ago it took several reboots and inserting the original SIM before the phone would unlock, but randomly it did.
Now I am stuck overseas, and have been trying for 2 days to unlock this piece of ****. The exact same code will not work. The unfreeze code will not work. I even just paid $25 to an unlock website, and the just sent me the same codes, so the codes are definitely right.
I have tried all of the unlocking instructions in their email. Nothing is working.
None of these instructions work. No network unlock screen appears. I believe this feature does not work with this phone:
Code:
Method #2 Go to the dial screen on your phone as if you are going to make a call and press: #7465625*638*UNLOCKCODE# (8 digit unlock code)
OR
Method #3 Go to the dial screen on your phone as if you are going to make a call and press: #0111*UNLOCKCODE# (8 digit unlock code)
OR
Method #4 Go to the dial screen on your phone as if you are going to make a call and press #7465625*638*# Once prompted for code, enter the 8 digit Unlock Code.
When I insert a non-compatible SIM card, it asks me for the unlock code, then says "Network unlock request unsuccessful". If I try the unfreeze code, it gives the same message. Then I try the network unlock code again and it gives the same message again.
I have tried everything in the email they sent me, but nothing works.
I refuse to format my phone for this! I have so many settings that would be lost.
Is there anything you can do to help me get this working, or explain to me the correct digits to dial in the dialer to get the mysterious "network unlock screen" to appear? I repeat, the digits above such as #7465625*638*UNLOCKCODE# do not work.

CJSnet said:
[Note, I do not have root (it caused too many weird glitches and I missed OTA updates).]
I have the Samsung Galaxy Nexus GSM originally locked to O2 UK. Months ago they provided me an unlock code and unfreeze code. When I entered it, the phone unlocked. But often, when changing SIM cards, I'd need to enter the code again. No big deal.
A few months ago it took several reboots and inserting the original SIM before the phone would unlock, but randomly it did.
Now I am stuck overseas, and have been trying for 2 days to unlock this piece of ****. The exact same code will not work. The unfreeze code will not work. I even just paid $25 to an unlock website, and the just sent me the same codes, so the codes are definitely right.
I have tried all of the unlocking instructions in their email. Nothing is working.
None of these instructions work. No network unlock screen appears. I believe this feature does not work with this phone:
Code:
Method #2 Go to the dial screen on your phone as if you are going to make a call and press: #7465625*638*UNLOCKCODE# (8 digit unlock code)
OR
Method #3 Go to the dial screen on your phone as if you are going to make a call and press: #0111*UNLOCKCODE# (8 digit unlock code)
OR
Method #4 Go to the dial screen on your phone as if you are going to make a call and press #7465625*638*# Once prompted for code, enter the 8 digit Unlock Code.
When I insert a non-compatible SIM card, it asks me for the unlock code, then says "Network unlock request unsuccessful". If I try the unfreeze code, it gives the same message. Then I try the network unlock code again and it gives the same message again.
I have tried everything in the email they sent me, but nothing works.
I refuse to format my phone for this! I have so many settings that would be lost.
Is there anything you can do to help me get this working, or explain to me the correct digits to dial in the dialer to get the mysterious "network unlock screen" to appear? I repeat, the digits above such as #7465625*638*UNLOCKCODE# do not work.
Click to expand...
Click to collapse
leave me a pm message, include your google id in it, and your model number (eg sgh-t654, gt-b5310 etc)

Thanks. May I ask why?
Sent from my Galaxy Nexus using Tapatalk 2

CJSnet said:
Thanks. May I ask why?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
thought i could help you unlock it directly without need for unlock code, but just found out it needs more than just a usb cable. I am helping out other guys via remote usb connection.
In your case, I cant really help coz ur phone is new on the playground so it needs sophisticated methods to direct unlock it.

Foreign SIM doesn't prompt for unlock code -- how to unlock?

I have a SaskTel Samsung Galaxy S3 (SGH-I747M, baseband version I747MVLLE8) that is locked, and I want to unlock it. But when I insert a foreign SIM (from AT&T) I get no prompt for an unlock code. Instead it just says "No SIM card. Emergency calls only." I've contacted several of the online unlock code suppliers and they say without this prompt I can't unlock the phone. I've also tried to enter variations of the *7465625* code, but they do nothing at all. SaskTel says they don't provide unlock code. This despite the fact that I purchased the phone outright, and have no contract with them. Am I totally hooped, or is there some way I can get this phone unlocked?

ddice said:
I have a SaskTel Samsung Galaxy S3 (SGH-I747M, baseband version I747MVLLE8) that is locked, and I want to unlock it. But when I insert a foreign SIM (from AT&T) I get no prompt for an unlock code. Instead it just says "No SIM card. Emergency calls only." I've contacted several of the online unlock code suppliers and they say without this prompt I can't unlock the phone. I've also tried to enter variations of the *7465625* code, but they do nothing at all. SaskTel says they don't provide unlock code. This despite the fact that I purchased the phone outright, and have no contract with them. Am I totally hooped, or is there some way I can get this phone unlocked?
Click to expand...
Click to collapse
try another SIM, maybe the one you're using is borked.

Try this
#7465625*638*# (Insert Network Lock Keycode)
Sent from my SGH-I747M using xda app-developers app

cue_32 said:
Try this
#7465625*638*# (Insert Network Lock Keycode)
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
I've already tried that, the phone doesn't respond to this keystroke sequence.

dLo GSR said:
try another SIM, maybe the one you're using is borked.
Click to expand...
Click to collapse
Possible, but I doubt it, since it works just fine in another phone. In any case I don't have another one to try.

Misread

#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.

lamsik said:
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
Click to expand...
Click to collapse
That and probably every variation of it I can think of! I am wondering though, is this code internal only to the phone, or does it go to the cellular network? When I do type it, it does nothing, though if I send it I get an "Invalid USSD" message returned from the network.

lamsik said:
#7465625*638*UNLOCKCODE#
I noticed in an earlier post, the place of the unlock code was after the #, it should be before. On the right track though. Probably just a typo.
unless you already tried that.
Click to expand...
Click to collapse
this code doesn't work on the LTE variants of the SGS3. most of the multi-stage codes (####*###) don't work, you just end up with an error.

Correct as stated. Additionally, if you have a foreign micro sim, and you are not on a stock ROM, the unlock screen prompt will not show. I was running AOKP, and could not get the prompt to show, so I flashed back to stock, unlocked phone, then flashed back to AOKP, bc TW sucks!
Sent from my SAMSUNG-SGH-I747 using xda premium

Gerbowski said:
Correct as stated. Additionally, if you have a foreign micro sim, and you are not on a stock ROM, the unlock screen prompt will not show. I was running AOKP, and could not get the prompt to show, so I flashed back to stock, unlocked phone, then flashed back to AOKP, bc TW sucks!
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
This is what I was starting to suspect. Can you refer me to a good, really clear step by step procedure to do this? I've never done this with a phone, and since I live in a small town, I doubt I can find anyone to help me here. So a step by step would be nice. Thanks.

ddice said:
This is what I was starting to suspect. Can you refer me to a good, really clear step by step procedure to do this? I've never done this with a phone, and since I live in a small town, I doubt I can find anyone to help me here. So a step by step would be nice. Thanks.
Click to expand...
Click to collapse
are you on a stock ROM?

i have a i747M and unlocked it with the at&t micro sim, so i know it works,
did u cut ur at&t sim down to size ? maybe u did it wrong and it wont recognize, or ur sim slot is ****ed up ....
ur best bet right now is to try another micro sim

Ok, I've now got my phone rooted. Can someone suggest how I can get the ROM set so that it will allow me to enter the unlock code when I insert a foreign SIM.

There's a 3rd potential method that hasn't been mentioned on here that we see working for most Samsung handsets. In fact, for some Samsung handsets (usually older ones) it is the only unlocking method that will work.
It is:
1. Turn on the phone with a non accepted or accepted SIM card inserted
2. Type #0111*CODE# replacing CODE with your network unlock code
However, if your service provider lock is active, then you'll need to use the code #0133*CODE# instead.
All unlocking methods (once you have the unlock code) are available here: http://www.mobileunlocked.co.uk/samsung-instructions.asp
Hope that helps.

Did you manage to unlock?
I'm facing the exact same issue. My S3 doesn't show the network unlock prompt when I insert a foreign SIM. Mine is locked to AT&T. It's also SGH-I747 model

You could try and unlock your phone as per this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
Then try the SIM card after the phone is unlocked.
Oh, I believe this only works on Stock ROMS.

Tybalt said:
You could try and unlock your phone as per this thread:
http://forum.xda-developers.com/showthread.php?t=2033225
Then try the SIM card after the phone is unlocked.
Oh, I believe this only works on Stock ROMS.
Click to expand...
Click to collapse
Follow the link Tybalt quoted, you will unlock your phone and the sim won't ask for an unlock code because well, it's unlocked.... Follow the instructions, you need to be on JB 4.11 for this to work, some have had success on custom roms but not many....you don't need to root to do this and make sure when you see the success code you have 40 at the end not 30... i did this a couple times... 30 I think basically means you have locked it again ... and in the instructions when it says wait 30 or 60 seconds... you really do have to wait.. don't be impatient....it's a huge thread with many many successes.....

Samsung Galaxy S3
I have the same issue but I have a sgh-i747 Samsung galaxy S3 i brought it to koodo and was told it was a compatible phone with the company when unlocked. The problem/question i have is When i insert my new simcard the screen will not display any prompt to input a unlock code. It just says emergency calls only or unregistered sim. I inserted my sim card into another s3 same model, software versions, different provider, and the phone asked for the unlock code right when powered on. So i tried and flashed a new firmware but its doing the same thing.
I called koodo and they gave me instructions to create a new apn of Koodo SP it did not make my phone prompt me for an unlock code.
When i send an email to any website about unlocking my phone they advice me not to purchase there product if my phones not prompting me for a unlock code that will it more then likely not work.
I've seen methods online of using these to input an unlock code "#0111*UNLOCKCODE#" or "#7465625*638*UNLOCKCODE#" but when i tell the unlock website this information this still tell me not to purchase there product and i mean many numerous websites. I do not want to buy an unlock code only to try to input it with these methods and have it not work. Which i highly dought it would because the normal 7465625 command doesnt work either.
I also tried this factory unlock and it did nothing
PLEASE HELP!?!?

mobileunlocked said:
There's a 3rd potential method that hasn't been mentioned on here that we see working for most Samsung handsets. In fact, for some Samsung handsets (usually older ones) it is the only unlocking method that will work.
It is:
1. Turn on the phone with a non accepted or accepted SIM card inserted
2. Type #0111*CODE# replacing CODE with your network unlock code[/URL]
Hope that helps.
Click to expand...
Click to collapse
Thank you so much for this!
Whenever I typed any variation of the #7465625 code I would get the "emergency calls only" message. #0111*CODE# did the trick!
The provider didn't even know this, the best they could come up with after numerous calls to their hotline is that the phone was broken and/or that the SIM card was badly inserted, thus I should mail them the phone to the other side of the country for unlocking. Would they even have known how to do it over there?
My grandma says thanks!

[Q] SIM unlocking phone

Hi all
I recently came to the end of my contract, and decided that I was quite happy with my Desire HD, I would switch to PAYG
So I got a code from Orange to unlock the handset.
I put my new SIM in, and it came up with "SIM Network Unlock PIN" and a text input box, plus buttons for Unlock and Dismiss.
I enter my unlock code, and it says "Network unlock successful"
As I understand it, at this point it should reboot and reflash the radio. It does not do this, it simply goes to the home screen and I have no reception. It is just as if I have clicked Dismiss.
Please can someone advise how I can get this to work?
I'm running IceColdSandwich.
Thanks.

Did you put the sim cover back on? Its needed for the antenna

marsdta said:
Did you put the sim cover back on? Its needed for the antenna
Click to expand...
Click to collapse
Yes, I did. As I said, it hasn't even done the bit where it reboots to flash the radio.

What if you reboot manually? You could always head back to the carrier and let them know the code didn't work.
You could also achieve soff,in doing so also sum unlocks

marsdta said:
What if you reboot manually? You could always head back to the carrier and let them know the code didn't work.
You could also achieve soff,in doing so also sum unlocks
Click to expand...
Click to collapse
If I reboot manually it just boots as normal and shows the "SIM Network Unlock PIN" screen again.
I think the problem is the handset rather than the code, as when I enter the code it does say that it has been accepted - it just then doesn't reboot.
Thanks, I'll try the SOFF method.

I can't get ADB to connect from my work PC, so I'll try this when I get home later.
Thanks.

Unlocking SM-T217S Galaxy Tab 3 Sprint.

I have the MSL code but when I put a sim card in for ATT and reset the device it says invalid sim card. I never get an option to enter the code in to unlock the device for another carrier. I am stock firmware not rooted. I actually tried loading ATT stock firmware on to the tablet and that didn't work at all. I can't take it to sprint because the person I bought it from is not in good standing with them.
Any help would be awesome!

I know this is old, but did you ever get your tablet sim unlocked?
I have one I have been trying to get unlocked, using an idoneapps unlocking app to debrand and unlock my tablet. I’ve run the app several times and while it got rid of the sprint branding and boot image, and says sim unlock successful, I keep getting invalid SIM card error.
ive reset network settings, my tablet is stock 4.4.2 firmware and rooted.