Hi guys,
Does anybody know exactly what rear camera module I need for my HTC One X ?
My serienumber is: HT24MW11511......
Because my camera died on me, it just returns a black screen when opening the camera-app and the app freezes then.
Hard-reset (factory reset) didn't help.
Opening the hardware from the case didn't show any damage, but there could be a loose wire or so. Couldn't get that deep inside the camera module.
I have read threads about different type of modules for different type of One X models.
I wonder if the G23 S720e module is the right one for my model.
I also couldn't find any differences between modelnumbers like HT24, HT25 etc....
Maybe someone could post the differences other than only the manufacturing date.
So, anybody know if these camera-modules are correct for replacement with my broken rear camera?
- http://www.nicermarket.com/htc-one-g23-s720e-camera-module-back-rear-camera-module-megapixels-camera-free-shipping-p-650.html
- http://rounded.com/htc-one-x-g23-s720e-camera-module-back-rear-camera-module-spare-part-23fp.html
- http://www.gultek.eu/htc-spare-parts/camera-module/one-x.html
PS: Is there also a difference in EU htc one x's and US one x's ?
Mine is a non-rooted original dutch EU htc one x.
Kind regards!
P
There is a thread here discussing this, there does seem to be different camera modules.
yeah i know about that thread and have read it, but I couldn't get any wiser from that. That thread also talks about a mistake about cleaning the lens with alcohol or something, It doesn't explain in detail anything about the differences in models and differences in camera-modules or any tips/tricks to get a broken camera working again.
Detailed info would be something like part-numbers etc.
Or tutorials on how to replace the camera etc.
But cheers for the quick reply
rear camera not working
same problem here.....no problem with changing the camera but i just want to be sure that will solve my problem. i was wondering if there is some test i can do to be 100% sure the camera is dead and not the motherboard or something else.....
any insight would be very much appreciated.
Related
help I have me problems with the camera of the elf!
Don't work me anymore! must I replace her it, would someone know me to say where to find her it?
And possible to replace the camera with one who has more pixelses? If him where I find her it?
excused to my English not and my fort…. Thanks to all beforetime!
What is the problem first of all?
And no, you can't put in a higher res camera.
ebay may have a replacement part.
the main problem and that the camera does not work me, and I have tried to inform to me in a center of assistance in my city (Trieste - Italy) and they have answered to me that the camera of reciprocation does not have to us and very difficult to reperire. And so me meeting without camera and this gives much annoyance to me being that drawn my Elf with much cure.
and on ebay they aren't successful to find it and for this I wondered if by chance it were possible to mount a camera of an other compatible model HTC with l Elf.?
Was it the HTC service centre that said the camera is broken? Did they mention if it was the detachable camera board, or something more?
All I can really suggest is backup, hard reset, does it work?
If not, well, then I would suggest maybe opening your device and checking how the camera board is seating into the mainboard. If it is all fine, you may need to find a new one. Either a new phone, or a new camera board from a dead elf.
Hi all,
I repaired my DHD with a new screen / middle chassis. I got it working again with the Jellytime rom, but the camera fails to start.
I subsequently bought a replacement but that didn't work either.
Could anyone give me any pointers as to what I could check for camera operation ?
i.e. I 'think' I put it back the right way round...its it poss to put it back wrongly ot would it foul?
Only just put the jellytime rom on after reassembly. Could the rom be faulty? Would a reflash work?
Its a shame as I don't want to throw any more money at fixing it...nor to I want to trash it.
Basically I want to keep it as a spare or let one of the kids have it .
thx
In my opinion, best way to go would be to install a stable ROM. Preferably the ROM that your camera still worked with. Also you could try 3rd party camera apps or barcode apps for instance, that use the camera function.
Good luck.
((( I've tried several roms not from Jellytime to IcecoldSandwich to the old Gingerbread revolution and nothing works. Also wiped the SD card too in case something from the past was causing a hiccup.
So I'm concluding this is hardware related, just wonder what could it be if I only just put a brand new lense module in.....
EDIT : i've followed this vid from start to end and can't see where I when wrong. The camera bit is after 4.40mins
http://www.youtube.com/watch?v=JfatoeWbMRk&feature=player_embedded#!
camera fis?
ebod said:
Hi all,
I repaired my DHD with a new screen / middle chassis. I got it working again with the Jellytime rom, but the camera fails to start.
I subsequently bought a replacement but that didn't work either.
Could anyone give me any pointers as to what I could check for camera operation ?
i.e. I 'think' I put it back the right way round...its it poss to put it back wrongly ot would it foul?
Only just put the jellytime rom on after reassembly. Could the rom be faulty? Would a reflash work?
Its a shame as I don't want to throw any more money at fixing it...nor to I want to trash it.
Basically I want to keep it as a spare or let one of the kids have it .
thx
Click to expand...
Click to collapse
I have fixed a lot of inspires and it is possible to put camera in the wrong way...not that you did but its possible-there is a small space/ 'slot' that needs to face away from speaker, it points to where the black wire threads the plastic speaker/camera cover. Another thought if you had main boards apart is they are not fully seated under the mylar now...and lastly maybe that the camera mainboard section is no good....
Nope no luck with anything here. Camera is correctlt seated and the mainboards never got separated..
Everything else worked eg Wifi , GPS , sound and camera flash torch.
Presently have it bits again.
One thought.....at the edge of the battery cover there are two contacts which mate with the top half main board. What should these contacts trigger ?
Hello I just had my M8 camera replaced by a local repair center. They charged me $72.80 CAD for it. The camera of the m8 is gorgeous now but there are some times when it says duo camera is blocked when there is nothing blocking it. So...I did some research and they said recallibrating the camera after it has been disconnected from the board would be the best try. So....all of you smart XDA people, could I get some assistance?
Note: tried factory reset and cache wipe
Hello,
have you any experiance on this topic? Is there a solution available?
I have also the problem with blocked duo camera.
THX
kleiner
Hi,
I've recently had the same issues. My camera was broke and I replaced it myself with another one. It works now but gives the message that the dual camera is blocked.
I did some research and found out that with every replacement of the camera, it needs to be calibrated. That is something that has to be done with the proper software (HTC related, and as far as I know, not available on the internet).
My HTC 10's front-facing camera appears to be disconnected from the main board. I assume it got disconnected when I dropped my phone.
It's a hardware issue for sure. My question is: has anyone tired to disassemble the phone to fix that problem?
Is it the cord that got damaged or is the root of the problem in something else? How safe it is to disassemble the device?
Thanks in advance
YouTube search
Rolo42 said:
YouTube search
Click to expand...
Click to collapse
I have seen a ton of disassembly videos for HTC 10, my question is not "how to repair", but "is it worth it".
I am only interested in user's experience here.
Hi everyone. I have been actively following this forum for the last year, and would like to thank upfront for every guide and helpful members that helped me make the most of my whyred. I'm posting this here because I can't find any relevant information regarding this matter.
I accidentally cracked the camera glass, and proceeded to replace it. However, after the repair and thorough cleaning, the camera is snapping very blurry pictures, making me assume the camera actually got damaged.
I know it is possible to use the pro camera on the global version and vice-versa. However, I would like to know if it is possible to install the note 6 camera instead as it is the only replacement I found nearby. They are both exactly the same size and connectors, only the sensor being different. As the hardware on both is greatly the same, i figure it could work, maybe with the right drivers, but i don't know for sure.
Should I risk it? BTW I'm on AOSP Extended Rom, don't know if that makes any difference.
Thanks in advance for the help.