Can I install a STOCK ROM from Poland (4.1.2) on a device bought in FRANCE? I use my N7100 in BRAZIL!
flip00 said:
Can I install a STOCK ROM from Poland (4.1.2) on a device bought in FRANCE? I use my N7100 in BRAZIL!
Click to expand...
Click to collapse
Yes, yes you can. It will not wipe anything. Just flash it over Odin.
Zoran1 said:
Yes, yes you can. It will not wipe anything. Just flash it over Odin.
Click to expand...
Click to collapse
But what about the modem for Brazil? It will receive the signal from my carrier , good!?
flip00 said:
But what about the modem for Brazil? It will receive the signal from my carrier , good!?
Click to expand...
Click to collapse
It will get a signal however I can't guarantee the strenght of the signal. Maby be better may be worse.
Zoran1 said:
It will get a signal however I can't guarantee the strenght of the signal. Maby be better may be worse.
Click to expand...
Click to collapse
If it get a bad sginal to flah the OFW again, is jsut do the same thing via ODIN!?
Are you sure it won't wipe if I flash the stock rom on Odin? I hope it won't wipe because that'd suck and I'm on ALJ3 and I flashed a DLX7 rom (like the Poland one). And no problems at all and I'm not polish what I'm worried iswill it wwipe..??
Related
heyyy...
I had flash my rom with this latest firmware.
It is working fine but only one wifi problem...
my fone was not rooted when i flash this firmware.
and it is also TMobile Uk unlocked...
thanks
meeaaoon said:
heyyy...
I had flash my rom with this latest firmware.
It is working fine but only one wifi problem...
my fone was not rooted when i flash this firmware.
and it is also TMobile Uk unlocked...
thanks
Click to expand...
Click to collapse
wifi is ok on my arc 2.3.4
meeaaoon said:
heyyy...
I had flash my rom with this latest firmware.
It is working fine but only one wifi problem...
my fone was not rooted when i flash this firmware.
and it is also TMobile Uk unlocked...
thanks
Click to expand...
Click to collapse
Try re-flashing. If it still doesn't work, flash by wiping the cache.
make sure your router isnt using 'mixed mode' authentication
Flash 2.3.4 kernel.
http://forum.xda-developers.com/showpost.php?p=17746755&postcount=775
micks_address said:
make sure your router isnt using 'mixed mode' authentication
Click to expand...
Click to collapse
If it use "mixed mode" and can not change mode, how to use wifi?
Hi, I wanted to revert completely back to the default factory ROM after a custom ROM give me trouble. I tried to do 'factory reset' and super wipe but it does not work.
Any help is greatly appreciated.
Download Stock firmware and reflash with Odin?
McLaren__F1 said:
Download Stock firmware and reflash with Odin?
Click to expand...
Click to collapse
Thanks. I checked Sammobile for firmware but there is many version from many countries. Problem is that I bought an imported set but Im not sure which country it is from.
Also, is there any instruction on doing it on Odin? Most video that I checked online are blurry and there is no step and step guide
Read the first post and u should be good to go
http://forum.xda-developers.com/showpost.php?p=31801046&postcount=1
McLaren__F1 said:
Read the first post and u should be good to go
http://forum.xda-developers.com/showpost.php?p=31801046&postcount=1
Click to expand...
Click to collapse
Thanks again!!
Last question though, which firmware should I download? The last thing I want is a bricked Note 2. Behind my battery, the spec as follows:
FCC ID: A3lGTN7100
SSN: N7100GSMH
Made in Vietnam
You can flash any ROM
for better language and store support, you can flash ROM for your country.
dr.ketan said:
You can flash any ROM
for better language and store support, you can flash ROM for your country.
Click to expand...
Click to collapse
I also have a N7100GSMH. I am looking to put this back to stock firmware to sell it. I am looking at downloading the local region at http://samsung-updates.com/device/?id=GT-N7100 but I am not sure what region code is for the US.
hey i got the same question here, right now im on paranoid android root and everything, but if i ever wanted to go back to stock, as far as i have read, the proper way would by just installing the official firmware by odin right? of course after unrooting the phone and getting the flash counter back to 0 right??
rubennd said:
hey i got the same question here, right now im on paranoid android root and everything, but if i ever wanted to go back to stock, as far as i have read, the proper way would by just installing the official firmware by odin right? of course after unrooting the phone and getting the flash counter back to 0 right??
Click to expand...
Click to collapse
yes that is so damm right (Y)
Actually there isn't a US ROM since this was never released here.
aukhan said:
yes that is so damm right (Y)
Click to expand...
Click to collapse
well thanks for the answer
Hey guys, i'm a noob here.
I just flashed my phone with cm 10.1 and i'm not getting any signal on my phone. Before this i was on 2.3.6. Anyone have any suggestions on whether i should just flash the official 4.1.2 (and if i should, do you have any download links to the latest one?) or if you have any solution to my phone signal problem.
Thanks a lot guys
First flash JB firmware http://forum.xda-developers.com/showthread.php?t=2118119
Than flash custom ROM : Good:
muxa1980 said:
First flash JB firmware http://forum.xda-developers.com/showthread.php?t=2118119
Than flash custom ROM : Good:
Click to expand...
Click to collapse
i tried downloading the latest firmware from sammobile.com but it only had the .tar.md5 file, no csc file, so im not sure if i could follow this process
Just flash it as PDA.
Sent from my GT-I8160
Rox said:
Just flash it as PDA.
Sent from my GT-I8160
Click to expand...
Click to collapse
is there anything i need to do before i flash it as PDA?
ginryu006 said:
is there anything i need to do before i flash it as PDA?
Click to expand...
Click to collapse
wipe data/cache dalvik before and after flash
Rox said:
wipe data/cache dalvik before and after flash
Click to expand...
Click to collapse
i see, thanks. so if i flash that rom, will i lose my root access?
ginryu006 said:
i see, thanks. so if i flash that rom, will i lose my root access?
Click to expand...
Click to collapse
yes, but it is easy to have it again
there is thread out here , just flash root.zip , searfch for : "how to root jellybean" by shaan, i am to lazy xD
Rox said:
yes, but it is easy to have it again
there is thread out here , just flash root.zip , searfch for : "how to root jellybean" by shaan, i am to lazy xD
Click to expand...
Click to collapse
thanks a lot oh, and one last thing, any suggestions on which firmware is best? the one i have is XENMF1
ginryu006 said:
thanks a lot oh, and one last thing, any suggestions on which firmware is best? the one i have is XENMF1
Click to expand...
Click to collapse
Take any XXMG2 from here: http://forum.xda-developers.com/showthread.php?t=2340849
ginryu006 said:
Hey guys, i'm a noob here.
I just flashed my phone with cm 10.1 and i'm not getting any signal on my phone. Before this i was on 2.3.6. Anyone have any suggestions on whether i should just flash the official 4.1.2 (and if i should, do you have any download links to the latest one?) or if you have any solution to my phone signal problem.
Thanks a lot guys
Click to expand...
Click to collapse
back to GB Stock ROM, and you can use jelly bean 4.1.2 Frimware for your region country, flash with odin, put PDA and CSC, if your flash done, go to recovery mode, and clear data and cache , and now you can reboot , finish, your trouble is done
Rox said:
Just flash it as PDA.
Sent from my GT-I8160
Click to expand...
Click to collapse
help! i did what you said and now my phone's stuck on the boot screen. i can't even access download or recovery mode
hi friend i upgarde my s4 mini i9195 to KK firmware version ( i9195xxucnk5) iam froum morroco i cant find any KK rom for morroco.when i upgarde my phone from JB TO KK my connection 3g/signal/wifi is slow and i get a bed signal so can i flash a modem JB OVER MY KK ROM NOW???
znayver said:
hi friend i upgarde my s4 mini i9195 to KK firmware version ( i9195xxucnk5) iam froum morroco i cant find any KK rom for morroco.when i upgarde my phone from JB TO KK my connection 3g/signal/wifi is slow and i get a bed signal so can i flash a modem JB OVER MY KK ROM NOW???
Click to expand...
Click to collapse
Samsung did not officially launch S4 Mini LTE I9195 in Morocco. You can find firmware for your country only if samsung launches the phone there.
I am from India and I use I9195. Samsung did not launch that model. We have dual sim I9192. So obviously there are no modems based on India networks for I9195.
I suggest you to flash modem of a country that is closest to Morocco. Spain comes to my mind first. Flash modems made for spain, like XXUCNE6, COA2 or CNK1
http://www.sammobile.com/firmwares/database/GT-I9195/PHE/
That link gives you spanish unbranded firmwares. Flash one of those and test the signal strength on your device.
You cannot flash jb modems onto kitkat bootloader. It will fail. If it flashes then Wifi will not work.
sasank360 said:
Samsung did not officially launch S4 Mini LTE I9195 in Morocco. You can find firmware for your country only if samsung launches the phone there.
I am from India and I use I9195. Samsung did not launch that model. We have dual sim I9192. So obviously there are no modems based on India networks for I9195.
I suggest you to flash modem of a country that is closest to Morocco. Spain comes to my mind first. Flash modems made for spain, like XXUCNE6, COA2 or CNK1
http://www.sammobile.com/firmwares/database/GT-I9195/PHE/
That link gives you spanish unbranded firmwares. Flash one of those and test the signal strength on your device.
You cannot flash jb modems onto kitkat bootloader. It will fail. If it flashes then Wifi will not work.
Click to expand...
Click to collapse
ouh tnx very much my friend you are great tnx for your great help can you post for me a spain modem with (RPM AND TZ)
znayver said:
ouh tnx very much my friend you are great tnx for your great help can you post for me a spain modem with (RPM AND TZ)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2545784
Try there. Or this
http://d-h.st/vOVF
sasank360 said:
http://forum.xda-developers.com/showthread.php?t=2545784
Try there. Or this
http://d-h.st/vOVF
Click to expand...
Click to collapse
tnx my friend sansak but i have a big probleme i cant flash the modem with odin its stuck at (get pit for mapping) i try 2 cable and i try 12 port usb i remove the simcard and the sdcard same probleme i reinstall the driver usb samsung i kill kies and the same probleme you think that if i do a factory reset for my phone solve the probleme?i use ploiki ste rom 4.3 up4....you post now 2 modem for me can i flash the 2nd modem with cwm without odin?
znayver said:
tnx my friend sansak but i have a big probleme i cant flash the modem with odin its stuck at (get pit for mapping) i try 2 cable and i try 12 port usb i remove the simcard and the sdcard same probleme i reinstall the driver usb samsung i kill kies and the same probleme you think that if i do a factory reset for my phone solve the probleme?i use ploiki ste rom 4.3 up4....you post now 2 modem for me can i flash the 2nd modem with cwm without odin?
Click to expand...
Click to collapse
Try to uninstall and samsung usb drives/ samsung kies. Then restart. Now reinstall usb drivers/ kies and restart again.
Now run Odin as administrator. You have to use odin to flash modem. Flashing modem needs bootloader access.
Only odin can access bootloader[download mode]. Not sure if factory reset works but nevertheless try that before flashing.
sasank360 said:
Try to uninstall and samsung usb drives/ samsung kies. Then restart. Now reinstall usb drivers/ kies and restart again.
Now run Odin as administrator. You have to use odin to flash modem. Flashing modem needs bootloader access.
Only odin can access bootloader[download mode]. Not sure if factory reset works but nevertheless try that before flashing.
Click to expand...
Click to collapse
i try all this method fo 2 day and no success i dont know the probleme...can i flash a modem with cwm without odin???
znayver said:
i try all this method fo 2 day and no success i dont know the probleme...can i flash a modem with cwm without odin???
Click to expand...
Click to collapse
No. you cannot flash modems with recovery.
As i said earlier the bootloader should be writing modem to its partition. and u need odin for that.
sasank360 said:
No. you cannot flash modems with recovery.
As i said earlier the bootloader should be writing modem to its partition. and u need odin for that.
Click to expand...
Click to collapse
okey my friend..i try 2 pc and the same probleme odin stuck at get pit for mapping....i think the rom of ploiki is the probleme bcz when i update to up 1 and 2 ..4 i dont do factory reset..now i will try flash cm12 and try again do you think is a good idea?
znayver said:
okey my friend..i try 2 pc and the same probleme odin stuck at get pit for mapping....i think the rom of ploiki is the probleme bcz when i update to up 1 and 2 ..4 i dont do factory reset..now i will try flash cm12 and try again do you think is a good idea?
Click to expand...
Click to collapse
Can you flash a stock firmware using ODIN ??
Try that first. If you still get the same "pit for mapping" issue then we need some expert advice.
sasank360 said:
Can you flash a stock firmware using ODIN ??
Try that first. If you still get the same "pit for mapping" issue then we need some expert advice.
Click to expand...
Click to collapse
okey my friend i try to flash stock rom and i tell you the results later
Hello, please help me after update to DOI1 with smart switch, i have problems with my carrier signal, its very inestable, what can i do?
I did the emergency install to delete all configuration but the problems continues..
Thanks
More info please. Are you rooted? Do you have a custom ROM or kernel? Please tell us what your exact set up is so we can help.
Akw6190 said:
More info please. Are you rooted? Do you have a custom ROM or kernel? Please tell us what your exact set up is so we can help.
Click to expand...
Click to collapse
Yes, the phone was rooted, I had the stock rom (the last one before DOI1) and the unikernel V8, I decided update using smartflash, i dont have problems in the update, but when i put the simcard, the signal its very bad, with other phone the signal its good. the problem its with 3,5 G and LTE.
fabioplata said:
Yes, the phone was rooted, I had the stock rom (the last one before DOI1) and the unikernel V8, I decided update using smartflash, i dont have problems in the update, but when i put the simcard, the signal its very bad, with other phone the signal its good. the problem its with 3,5 G and LTE.
Click to expand...
Click to collapse
Hm. If you're rooted, I assume you know how to use ODIN, correct? Also, since you've got a custom kernel, I also assume KNOX is tripped, correct. Making both of those assumptions, I recommend you download the DOI1 firmware from Sammobile or XDA and flash it using ODIN. I may be wrong, but it sounds like you have a modem issue, and re-flashing stock should help.
Akw6190 said:
Hm. If you're rooted, I assume you know how to use ODIN, correct? Also, since you've got a custom kernel, I also assume KNOX is tripped, correct. Making both of those assumptions, I recommend you download the DOI1 firmware from Sammobile or XDA and flash it using ODIN. I may be wrong, but it sounds like you have a modem issue, and re-flashing stock should help.
Click to expand...
Click to collapse
I did, but nothing happened, I did all wipes but nothing. I think maybe I need wait for a new update.
fabioplata said:
I did, but nothing happened, I did all wipes but nothing. I think maybe I need wait for a new update.
Click to expand...
Click to collapse
No, don't work, I try to install other stock firmware, other modem, nothing..
How is the way to downgrade the firmware of modem?
How to install old modem or baseband?