Galaxy Nexus GSM - Bricked. Totally.

Galaxy Nexus GSM - Bricked. Totally. - Samsung Galaxy Nexus

Hello Guys,
Last night before going to sleep I did the usual routine, read some late-night news and then set my alarm for the morning to follow. I plugged the phone into the charger and went to sleep. Morning come the phone did not wake me up, it was simply just "turned off". I started it up, thinking it might just have had a shutdown during charging and went out to do my business in the bathroom. When I came back 15 minutes later it was still stuck at the Google Logo trying to boot up. I shut it off by pulling out the battery and head to work thinking I can solve it there.
Later at work I tried different things. I tried to use some of the toolkits made avaible for the phone to no luck. I tried using Odin to flash a standard rom onto the phone with no luck. One thing repeating itself is that whenever I try to flash a new system on to the phone, it get's stuck in the process and gives me a write error.
- Any ideas as to what might fix my phone? It's 1½-2 years old (bought 2 days after release, had it's rough life and scars to prove it, but it has never acted up like this. - And please thoroughly explain a solution to me, I'm not well versed in using ADB/Fastboot with the phone for troubleshooting and such.
Best Regards,
Desca

Use nexus toolkit and flash image stock from google
Sent from my Galaxy Nexus using xda premium

I already tried that. The process just comes to a halt and it freezes up. I then have to unplug the battery to restart the phone.+

Try this:
http://forum.xda-developers.com/showthread.php?t=1925468

Mach3.2 said:
Try this:
http://forum.xda-developers.com/showthread.php?t=1925468
Click to expand...
Click to collapse
Thanks for the tip, but the links aren't working anymore.

And I don't have his issues. I can boot up in Odin Mode + Fastbood Mode without problems.
Only thing I can't boot up in is Recovery Mode.

are you seeing a android on his back with a explanation point? that is stock recovery if thats the case. vul up and power (maybe vol down and power) will get the menu for stock recovery.

Zepius said:
are you seeing a android on his back with a explanation point? that is stock recovery if thats the case. vul up and power (maybe vol down and power) will get the menu for stock recovery.
Click to expand...
Click to collapse
I'm seeing this;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And in Odin Mode I'm just seeing a plain 2D Android with "Downloading... Do not turn off target !!" underneath.

When I'm trying to flash the phone with a new PIT and a original ROM i get a error message saying "There is no PIT partition".

Dude, uncheck "re-partition"! Don't do it ever again unless you know you really need it. I've never seen a single pit file for nexus. Only for Samsung phones (I know who manufactured gnez).
Sent from my Galaxy Nexus using xda premium

Desca said:
I'm seeing this;
<snip>
And in Odin Mode I'm just seeing a plain 2D Android with "Downloading... Do not turn off target !!" underneath.
Click to expand...
Click to collapse
That's the bootloader. At that point, you should be able to fastboot flash a fresh image. If you can get to this, never use Odin.

I tried the OMAPFlash thing, I ended up getting stuck again.
Code:
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter fileTargetsProjectstunaomap4460_tuna_hs_pro.txt at lin
1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC TargetsProjectstunaMLO_4460_HS_PRO
» chip_download EMMC TargetsProjectstunasbl.img
» command cold_sw_reset
» Leaving parameter fileTargetsProjectstunaomap4460_tuna_hs_pro.txt
» @TargetsProjectstunaomap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn off device
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 71 05 5F D4 2A A9 97 46 F8 04 7D 18 B3 AA CF
7F 96 36 31 CC
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets2nd-Downloadersdnld_startup_omap4_hs_8g_es2.s2.s
gned.2nd.hs_pro
» Entering parameter fileomapflash2nd.txt at line 46
» -pheriphalboot_reopen
» Reading board configuration file TargetsConfigurationsconfiguration_omap446
_tuna_8g.txt
» Reading definition file .targetsdefinitionsdefinitions_omap4.txt
» -board_config TargetsConfigurationsconfiguration_omap4460_tuna_8g.txt
» Leaving parameter fileomapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC TargetsFlash-Driversemmc_drv.bin sid 0 width 4 delay 9 rpa
i_base 0x00030400
» Downloading driver
» Downloading 'TargetsFlash-Driversemmc_drv.bin'
» Sending data (47160 bytes) [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration sid = 0x00000000
Driver configuration width = 0x00000004
Driver configuration delay = 0x00000009
Driver configuration rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 Manufacturer ID
eMMC CID CBX = 0x01 CardBGA
eMMC CID OID = 0x00 OEMApplication ID
eMMC CID PNM = 0x98CA0000BEC9 Product name
eMMC CID PRV = 0x25 Product revision
eMMC CID PSN = 0x0000BEC9 Product serial numbr
eMMC CID MDT = 0xBE Manufacturing date
eMMC CID CRC = 0x64 CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 CSD structure
eMMC CSD SPEC_VERS = 0x04 System specificatio version
eMMC CSD TAAC = 0x27 Data read access-tie 1
eMMC CSD NSAC = 0x01 Data read access-tie 2 in CLK cycles (NSAC100)
eMMC CSD TRAN_SPEED = 0x32 Max. bus clock freqency
eMMC CSD CCC = 0x00F5 Card command classe
eMMC CSD READ_BL_LEN = 0x09 Max. read data bloc length
eMMC CSD READ_BL_PARTIAL = 0x00 Partial blocks foread allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 Write block misaligment
eMMC CSD READ_BLK_MISALIGN = 0x00 Read block misalignent
eMMC CSD DSR_IMP = 0x00 DSR implemented
eMMC CSD C_SIZE = 0x00FF Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 Max. read current @ VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 Max. read current @ VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 Max. write current VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 Max. write current VDD max
eMMC CSD C_SIZE_MULT = 0x01 Device size multipler
eMMC CSD ERASE_GRP_SIZE = 0x1F Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F Erase group size mutiplier
eMMC CSD WP_GRP_SIZE = 0x0F Write protect groupsize
eMMC CSD WP_GRP_ENABLE = 0x01 Write protect groupenable
eMMC CSD DEFAULT_ECC = 0x00 Manufacturer defaul ECC
eMMC CSD R2W_FACTOR = 0x02 Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 Max. write data blok length
eMMC CSD WRITE_BL_PARTIAL = 0x00 Partial blocks forrite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 Content protectionpplication
eMMC CSD FILE_FORMAT_GRP = 0x00 File format group
eMMC CSD COPY = 0x01 Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 Permanent write proection
eMMC CSD TMP_WRITE_PROTECT = 0x00 Temporary write proection
eMMC CSD FILE_FORMAT = 0x00 File format
eMMC CSD ECC = 0x00 ECC code
eMMC CSD CRC = 0x33 CRC
eMMC EXT_CSD S_CMD_SET = 0x00 Supported Command Sts
eMMC EXT_CSD BOOT_INFO = 0x15 Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A Boot partition size eMMC EXT_CSD ACC_SIZE = 0x07 Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 High-capacity eraseunit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 High-capacity erasetimeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 Reliable write sectr count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 High-capacity writeprotect group size
eMMC EXT_CSD S_C_VCC = 0x01 Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 Sleep current (VCCQ
eMMC EXT_CSD S_A_TIMEOUT = 0x07 Sleepawake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 Minimum Write Perfomance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 Minimum Read Perforance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 Minimum Write Perfomance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 Minimum Read Perforance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 Minimum Write Perfomance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 Minimum Read Perforance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 Power class for 26Mz at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 Power class for 52Mz at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 Power class for 26Mz at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 Power class for 52Mz at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 CSD structure versin
eMMC EXT_CSD EXT_CSD_REV = 0x00 Extended CSD revisin
eMMC EXT_CSD CMD_SET = 0x02 Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 Command set revisio
eMMC EXT_CSD POWER_CLASS = 0x00 Power class
eMMC EXT_CSD HS_TIMING = 0x00 High-speed interfac timing
eMMC EXT_CSD BUS_WIDTH = 0x00 Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 Erased memory contet
eMMC EXT_CSD BOOT_CONFIG = 0x00 Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 High-density erase
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time 000.475 (99284 bytess)
» End loading driver
» Downloading
» Downloading 'TargetsProjectstunaMLO_4460_HS_PRO'
» Sending data (131072 bytes) .......... [65536]

Desca said:
I tried the OMAPFlash thing, I ended up getting stuck again.
Click to expand...
Click to collapse
Why are you using OMAPFlash? You're able to get to the bootloader. Use fastboot to flash a system image. If you're still having bootloops, flash a userdata image (though you will lose data at that point). If you don't know how, check the guides in the Q&A section.

Desca said:
When I'm trying to flash the phone with a new PIT and a original ROM i get a error message saying "There is no PIT partition".
Click to expand...
Click to collapse
More details.... what pit file are you using? Is repartition checked or unchecked?
I'm worried that you messing with omap flash might have done more harm than good
Maybe help you thro Odin if you say exactly what you've done...
m.kochan10 said:
Dude, uncheck "re-partition"! Don't do it ever again unless you know you really need it. I've never seen a single pit file for nexus. Only for Samsung phones (I know who manufactured gnez).
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
There is a pit file for Gnex I use it all the time. Samsung manufactures Gnex I believe.....
Sent from my GT-P7510 using xda premium

stinky73 said:
There is a pit file for Gnex I use it all the time. Samsung manufactures Gnex I believe.....
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
Yes i know that Samsung manufactures Nexus. I mentioned that in the end. I meant Samsung phones with Samsung original firmware like Ace, Note, S-line...etc. (original tar.md5 packages and not factory images). I've never seen original Odin fw-packages for nexus either (I am aware that samsung is responsible for software updates for certain gnexus variants...but I do not mean anything diffrent than yakju/takju now). I had to create them by myself Where did you get this original pit file? Would you mind to upload it?
Sent from my Galaxy Nexus using xda premium

m.kochan10 said:
Yes i know that Samsung manufactures Nexus. I mentioned that in the end. I meant Samsung phones with Samsung original firmware like Ace, Note, S-line...etc. (original tar.md5 packages and not factory images). I've never seen original Odin fw-packages for nexus either (I am aware that samsung is responsible for software updates for certain gnexus variants...but I do not mean anything diffrent than yakju/takju now). I had to create them by myself Where did you get this original pit file? Would you mind to upload it?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Sorry, misread the way you phrased it, didn't realise you were talking about the "other" models;
This pit came from another thread on XDA, can't remember where so can't thank original poster. Have used it on several occasions to "save" lost causes with re-partition. Me neither for the original odin fw packages - same as you, i make 'em myself

No problem I wasn't precise enough, thanks a lot for pit, cheers

Solved??
...from the bootloader is not hard to install a factory image. If you want ask, but look around for the documentation.
I m curious if is a problem of partition table. I have never seen before for gnex (maybe I am ignorant)

Cilraaz said:
Why are you using OMAPFlash? You're able to get to the bootloader. Use fastboot to flash a system image. If you're still having bootloops, flash a userdata image (though you will lose data at that point). If you don't know how, check the guides in the Q&A section.
Click to expand...
Click to collapse
^ This
You should ONLY use OMAP Flash when you can't do anything on the device. The toolkits not working are because they are faulty and quiet honestly should never be needed on Nexus device. You can flash fastboot files with only needing the Fastboot.exe file. No SDK or experience needed. Since you screwed with the partitions its anyones guess at this point
Sent from my Nexus 7 using Tapatalk HD

I'm only trying OMAPFlash since everything else so far has failed me. I haven't been able to flash a clean image or anything since yesterday morning. Even though I can boot the phone up in Fastboot every time I try to recover the phone, it gives me errors or gets stuck in the process. - And all this before I even tampered with partitioning and OMAPFlash.
I've more or less come to terms with the phone's eMMC chip is faulty and I need return it under warranty.
It still boots up fine in fastboot mode + odin mode, but everything I do gets an error or gets stuck in the process.

Related

Galaxy Nexus will not go into bootloader/fastboot/ODIN/download mode.

Nothing shows up, the phone will just boot to the Google logo with the pad unlocked. No matter what button combo I use it goes to the Google logo.
Does the MTP USB driver have anything to do with it? I have tried everything to get it recognized on my PC.

xrCore said:
Nothing shows up, the phone will just boot to the Google logo with the pad unlocked. No matter what button combo I use it goes to the Google logo.
Does the MTP USB driver have anything to do with it? I have tried everything to get it recognized on my PC.
Click to expand...
Click to collapse
what rom are you using?did you try to turn phone off and then first hold down in the middle of volume and power on?
Sent from my GT-N7000 using Tapatalk 2

afilopou said:
what rom are you using?did you try to turn phone off and then first hold down in the middle of volume and power on?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I have no idea, I got the phone like this. Yes, volume down+power and up+down+power do nothing.

Here is the log I get after running OMAP Flash:
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x14770000AE3B // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000AE3B // Product serial numbe
r
eMMC CID MDT = 0xAE // Manufacturing date
eMMC CID CRC = 0x1D // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.472 (99915 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
» Sending data (131072 bytes) :::::::::::::::::::: [131072]
» Downloading complete
» Elapsed time: 0:00.328 (399609 bytes/s)
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
EMMC eMMC DRIVER DEINIT COMPLETE
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x14770000AE3B // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000AE3B // Product serial numbe
r
eMMC CID MDT = 0xAE // Manufacturing date
eMMC CID CRC = 0x1D // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.432 (109166 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\sbl.img'
» Sending data (1835008 bytes) :::::::::::::::::::: [1835008]
» Downloading complete
» Elapsed time: 0:01.577 (1223330 bytes/s)
» cold_sw_reset
» Elapsed time: 0:09.409
Press any key to continue . . .
Click to expand...
Click to collapse

Bump!

The phone will power up and everything, correct? You are HOLDING the combo of Vol up/down and power for a couple of seconds right? Is there a custom ROM installed?

The phone will power on but will not go past the Google logo with the pad unlocked. I have tried every volume and power combo with, without battery, plugged in or not, it won't go anywhere. I have no idea what is installed.

xrCore said:
The phone will power on but will not go past the Google logo with the pad unlocked. I have tried every volume and power combo with, without battery, plugged in or not, it won't go anywhere. I have no idea what is installed.
Click to expand...
Click to collapse
You don't know what's installed...? Mmkay... did you try a different (fully charged) battery? After that, idk. Maybe let it rest w/o its battery for a few hours and try again. If not, then last resort would be a usb jib.

Yeah I bought the phone like this cheap to see if I could fix it, but I'm not having any luck. I will try the USB jig next.

Have you tried the toolkit? It has an option that says my phone won't boot to restore back to stock.

Yes, can't use the toolkit because it won't show up in adb or fastboot. In device manager it shows the driver as Samsung MTP device when on the Google logo, and as OMAP4460 when plugged in without battery (black screen).

In adb does it list your device? Can you verify you have correct drivers installed by plugging another gnex? I had issues with mine yesterday but it turned out to just be funky driver conflicts. I un installed all previous drivers and used the drivers from the toolkit and resorted to Odin to flash a stock build, then fast boot to flash cwm, and then cm9 Nightlies :beer:
Sent from my Galaxy Nexus using Tapatalk 2

Xoao
Form my SGS2 with 1ROM --VK-- 2ROM RootBox

z06mike said:
Have you tried the toolkit? It has an option that says my phone won't boot to restore back to stock.
Click to expand...
Click to collapse
This requires ODIN...
Sent from my Galaxy Nexus using xda app-developers app

bmg1001 said:
This requires ODIN...
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
OH! I was not aware of that. :good:

HELP Galaxy Nexus Bricked!

Please someone help me my galaxy nexus is totally bricked! I purchased it like this but i am unable to get it into download mode Windows keeps show OMAP 4440.
I have used http://forum.xda-developers.com/showthread.php?t=1640443 and gave me the things below:
Code:
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 92 E8 1D 8F 55 75 FC 06 86 E4 09 FB 46 2F BB
D2 A9 B0 61 B7
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter file:omapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter file:omapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x6EA900007E8F // Product name
eMMC CID PRV = 0x19 // Product revision
eMMC CID PSN = 0x00007E8F // Product serial numbe
r
eMMC CID MDT = 0x7E // Manufacturing date
eMMC CID CRC = 0x47 // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.464 (101637 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
» Sending data (131072 bytes) ::::::::::.......... [65536]
It gets stuck there.... I even left it there for almost 6 hours and still it stays on the same line. Please help!

think you have a bad motherboard.

what if you tried flashing google stock images from fastboot?

DEEE38 said:
Please someone help me my galaxy nexus is totally bricked! I purchased it like this but i am unable to get it into download mode Windows keeps show OMAP 4440.
I have used http://forum.xda-developers.com/showthread.php?t=1640443 and gave me the things below:
Code:
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.464 (101637 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
» Sending data (131072 bytes) ::::::::::.......... [65536]
It gets stuck there.... I even left it there for almost 6 hours and still it stays on the same line. Please help!
Click to expand...
Click to collapse
Have you tried:
- Extract driver to some folder
- Disconnect phone and remove battery
- Open the device manager:
- Connect the usb to the pc with the mini connected to the phone.
- You have only a few seconds to see the omap4440 and double click, if you could not open it the first time disconnect and reconnect the usb and try again.
- Once opened update driver and select to browse the folder included in the package to install driver.
- Run the tool again..
clowney said:
what if you tried flashing google stock images from fastboot?
Click to expand...
Click to collapse
op can't reach bootloader.

Hm when i didnt have the drivers installed for omap4440 the tools wouldnt do anything so i dont think it is the problem. I remember Reading something about a bad motherboard/Ram .
Sent from my Galaxy Nexus using xda premium

Can you get to fastboot or recovery? If so have you tried the tool kit? It will give you choices to execute if you're not to knowledgeable with fastboot commands.
Also check out this thread.
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/
Sent from my Galaxy Nexus using xda app-developers app

bk201doesntexist said:
Have you tried:
- Extract driver to some folder
- Disconnect phone and remove battery
- Open the device manager:
- Connect the usb to the pc with the mini connected to the phone.
- You have only a few seconds to see the omap4440 and double click, if you could not open it the first time disconnect and reconnect the usb and try again.
- Once opened update driver and select to browse the folder included in the package to install driver.
- Run the tool again..
op can't reach bootloader.
Click to expand...
Click to collapse
Driver has been installed but I can't reach loader is there any other way to do it? It gives mt the same screen as I posted before

Driver has been installed but I can't reach loader is there any other way to do it? It gives mt the same screen as I posted before
Click to expand...
Click to collapse
I think you took chance on the phone, but lost..
OMAP utility finds the phone fine and - it loads and and initializes eMMC driver
When loading MLO_4460_HS_PRO - it manages 65536 of 131072 bytes and hangs..
It looks like a hardware issue.

Can you go to the omap flash folder: .\OMAPFlash\Targets\Projects\tuna and there edit omap4460_tuna_hs_pro.txt:
Change
-t 36000 -p OMAP4460_TUNA_8G_HS_PRO -2
to
-t 36000 -p OMAP4460_TUNA_8G_HS_PRO -2 -rxtx_trace
and please share the results

Code:
data block length
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
00463-072-TX ACK
00483-073-RX:INFO: eMMC CSD READ_BL_PARTIAL = 0x00 // Partial b
locks for read allowed
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
00463-074-TX ACK
00483-075-RX:INFO: eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write blo
ck misalignment
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
00463-076-TX ACK
00483-077-RX:INFO: eMMC CSD READ_BLK_MISALIGN = 0x00 // Read bloc
k misalignment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
00463-078-TX ACK
00483-079-RX:INFO: eMMC CSD DSR_IMP = 0x00 // DSR imple
mented
eMMC CSD DSR_IMP = 0x00 // DSR implemented
00463-080-TX ACK
00483-081-RX:INFO: eMMC CSD C_SIZE = 0x00FF // Device si
ze
eMMC CSD C_SIZE = 0x00FF // Device size
00463-082-TX ACK
00483-083-RX:INFO: eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read
current @ VDD min
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
00463-084-TX ACK
00483-085-RX:INFO: eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read
current @ VDD max
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
00463-086-TX ACK
00483-087-RX:INFO: eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. writ
e current @ VDD min
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
00463-088-TX ACK
00483-089-RX:INFO: eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. writ
e current @ VDD max
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
00463-090-TX ACK
00483-091-RX:INFO: eMMC CSD C_SIZE_MULT = 0x01 // Device si
ze multiplier
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
00463-092-TX ACK
00483-093-RX:INFO: eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase gro
up size
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
00463-094-TX ACK
00483-095-RX:INFO: eMMC CSD ERASE_GRP_MULT = 0x1F // Erase gro
up size multiplier
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
00463-096-TX ACK
00483-097-RX:INFO: eMMC CSD WP_GRP_SIZE = 0x0F // Write pro
tect group size
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
00463-098-TX ACK
00483-099-RX:INFO: eMMC CSD WP_GRP_ENABLE = 0x01 // Write pro
tect group enable
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
00463-100-TX ACK
00483-101-RX:INFO: eMMC CSD DEFAULT_ECC = 0x00 // Manufactu
rer default ECC
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
00463-102-TX ACK
00483-103-RX:INFO: eMMC CSD R2W_FACTOR = 0x02 // Write spe
ed factor
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
00463-104-TX ACK
00483-105-RX:INFO: eMMC CSD WRITE_BL_LEN = 0x09 // Max. writ
e data block length
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
00463-106-TX ACK
00483-107-RX:INFO: eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial b
locks for write allowed
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
00463-108-TX ACK
00483-109-RX:INFO: eMMC CSD CONTENT_PROT_APP = 0x00 // Content p
rotection application
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
00463-110-TX ACK
00483-111-RX:INFO: eMMC CSD FILE_FORMAT_GRP = 0x00 // File form
at group
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
00463-112-TX ACK
00483-113-RX:INFO: eMMC CSD COPY = 0x01 // Copy flag
(OTP)
eMMC CSD COPY = 0x01 // Copy flag (OTP)
00463-114-TX ACK
00483-115-RX:INFO: eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent
write protection
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
00463-116-TX ACK
00483-117-RX:INFO: eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary
write protection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
00463-118-TX ACK
00483-119-RX:INFO: eMMC CSD FILE_FORMAT = 0x00 // File form
at
eMMC CSD FILE_FORMAT = 0x00 // File format
00463-120-TX ACK
00483-121-RX:INFO: eMMC CSD ECC = 0x00 // ECC code
eMMC CSD ECC = 0x00 // ECC code
00463-122-TX ACK
00483-123-RX:INFO: eMMC CSD CRC = 0x33 // CRC
eMMC CSD CRC = 0x33 // CRC
00463-124-TX ACK
00483-125-RX:INFO: eMMC EXT_CSD S_CMD_SET = 0x00 // Supported
Command Sets
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
00463-126-TX ACK
00483-127-RX:INFO: eMMC EXT_CSD BOOT_INFO = 0x15 // Boot info
rmation
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
00463-128-TX ACK
00483-129-RX:INFO: eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot part
ition size
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
00463-130-TX ACK
00483-131-RX:INFO: eMMC EXT_CSD ACC_SIZE = 0x07 // Access si
ze
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
00463-132-TX ACK
00483-133-RX:INFO: eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capa
city erase unit size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
00463-134-TX ACK
00483-135-RX:INFO: eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capa
city erase timeout
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
00463-136-TX ACK
00483-137-RX:INFO: eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable
write sector count
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
00463-138-TX ACK
00483-139-RX:INFO: eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capa
city write protect group size
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
00463-140-TX ACK
00483-141-RX:INFO: eMMC EXT_CSD S_C_VCC = 0x01 // Sleep cur
rent (VCC)
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
00463-142-TX ACK
00483-143-RX:INFO: eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep cur
rent (VCCQ)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
00463-144-TX ACK
00483-145-RX:INFO: eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awa
ke timeout
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
00463-146-TX ACK
00483-147-RX:INFO: eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Co
unt
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
00463-148-TX ACK
00483-149-RX:INFO: eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum W
rite Performance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
00463-150-TX ACK
00483-151-RX:INFO: eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum R
ead Performance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
00463-152-TX ACK
00483-153-RX:INFO: eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum W
rite Performance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
00463-154-TX ACK
00483-155-RX:INFO: eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum R
ead Performance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
00463-156-TX ACK
00483-157-RX:INFO: eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum W
rite Performance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
00463-158-TX ACK
00483-159-RX:INFO: eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum R
ead Performance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
00463-160-TX ACK
00483-161-RX:INFO: eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power cla
ss for 26MHz at 3.6V
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
00463-162-TX ACK
00483-163-RX:INFO: eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power cla
ss for 52MHz at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
00463-164-TX ACK
00483-165-RX:INFO: eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power cla
ss for 26MHz at 1.95V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
00463-166-TX ACK
00483-167-RX:INFO: eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power cla
ss for 52MHz at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
00463-168-TX ACK
00483-169-RX:INFO: eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
00463-170-TX ACK
00483-171-RX:INFO: eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD struc
ture version
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
00463-172-TX ACK
00483-173-RX:INFO: eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended
CSD revision
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
00463-174-TX ACK
00483-175-RX:INFO: eMMC EXT_CSD CMD_SET = 0x02 // Command s
et
eMMC EXT_CSD CMD_SET = 0x02 // Command set
00463-176-TX ACK
00483-177-RX:INFO: eMMC EXT_CSD CMD_SET_REV = 0x05 // Command s
et revision
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
00463-178-TX ACK
00483-179-RX:INFO: eMMC EXT_CSD POWER_CLASS = 0x00 // Power cla
ss
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
00463-180-TX ACK
00483-181-RX:INFO: eMMC EXT_CSD HS_TIMING = 0x00 // High-spee
d interface timing
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
00463-182-TX ACK
00483-183-RX:INFO: eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width
mode
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
00463-184-TX ACK
00483-185-RX:INFO: eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased me
mory content
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
00463-186-TX ACK
00483-187-RX:INFO: eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot conf
iguration
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
00463-188-TX ACK
00483-189-RX:INFO: eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus
width1
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
00463-190-TX ACK
00483-191-RX:INFO: eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-dens
ity erase group definition
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
00463-192-TX ACK
00483-193-RX:INFO: EMMC eMMC DRIVER INIT COMPLETE
EMMC eMMC DRIVER INIT COMPLETE
00463-194-TX ACK
00554-195-RX:eek:KAY: driver downloaded
» Downloading complete
» Elapsed time: 0:01.981 (24820 bytes/s)
» End loading driver
» Downloading
00385-196-TX:write EMMC 20000 00020000
00463-197-TX ACK
00554-198-RX:eek:KAY: expecting download
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
00385-199-TX:download:00020000
00527-200-RX:data00018000
» Sending data (131072 bytes) :::::............... [32768]
00148-201-TX 32768 bin bytes
00527-202-RX:data00018000
» Sending data (131072 bytes) ::::::::::.......... [65536]
00148-203-TX 32768 bin bytes

I forgot to mention this but my galaxy nexus is GSM i9250 if it helps. It is a international version

you could use it for parts..

I get the same exact problem it gets stuck here:
» Sending data (131072 bytes) ::::::::::.......... [65536]
Did you manage to fix it or find out what's wrong?
So the emmc is faulty?

I gave the logs already but i havent recieved a response back from the other poster. I think it might be a faulty EMMC i am not 100% sure

help???

Does your phone boot up at all?

jingleberry said:
Does your phone boot up at all?
Click to expand...
Click to collapse
no it doesn't, black screen, OMAP 4460

man, i'm also experiencing this with one of mine.
can somebody help?

Hi OP, did you manage to get your GNex fixed?
I'm in the same boat as you are.

Nope, haven't been able to fix it so what I did was send it into have a hard brick repair by mobiletechvideos.com lets see how it is after I get it back

[Q] Galaxy Nexus bricked, OMAP Flash? (kinda SOLVED)

Hi,
I was running stock Android 4.1 on my Galaxy Nexus and after usual rebooting yesterday I got the Android with the red triangle. I couldn't get into the recovery, only into Download Mode. I came here to fix it, tried to flash a stock rom with Odin but it didn't work. On booting it always got stuck at the Google logo for some hours.
I then followed this Thread ([HOW-TO] [GSM & CDMA] Return to stock for ALL Galaxy Nexus phones (latest JOP40D)). Here is the log from it:
Code:
C:\Android\GalaxyNexus>fastboot devices
0149A4[...] fastboot
C:\Android\GalaxyNexus>fastboot oem unlock
...
FAILED (remote: Already Unlocked)
finished. total time: 0.003s
C:\Android\GalaxyNexus>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.003s]
finished. total time: 0.004s
C:\Android\GalaxyNexus>fastboot flash bootloader bootloader-mag
uro-primelc03.img
sending 'bootloader' (2308 KB)...
OKAY [ 0.223s]
writing 'bootloader'...
OKAY [ 0.309s]
finished. total time: 0.534s
C:\Android\GalaxyNexus>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.008s]
finished. total time: 0.009s
C:\Android\GalaxyNexus>fastboot flash radio radio-maguro-i9250x
xlh1.img
sending 'radio' (12288 KB)...
OKAY [ 1.164s]
writing 'radio'...
OKAY [ 1.380s]
finished. total time: 2.546s
C:\Android\GalaxyNexus>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.008s]
finished. total time: 0.009s
C:\Android\GalaxyNexus>fastboot flash system system.img
erasing 'system'...
OKAY [ 0.022s]
sending 'system' (425775 KB)...
OKAY [ 39.617s]
writing 'system'...
OKAY [ 46.373s]
finished. total time: 86.015s
C:\Android\GalaxyNexus>fastboot flash userdata userdata.img
erasing 'userdata'...
OKAY [ 0.343s]
sending 'userdata' (137554 KB)...
OKAY [ 12.781s]
writing 'userdata'...
OKAY [ 19.785s]
finished. total time: 32.912s
C:\Android\GalaxyNexus>fastboot flash boot boot.img
sending 'boot' (4400 KB)...
OKAY [ 0.419s]
writing 'boot'...
OKAY [ 2.269s]
finished. total time: 2.689s
C:\Android\GalaxyNexus>fastboot flash recovery recovery.img
sending 'recovery' (4900 KB)...
OKAY [ 0.466s]
writing 'recovery'...
OKAY [ 1.438s]
finished. total time: 1.905s
C:\Android\GalaxyNexus>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.067s]
finished. total time: 0.068s
C:\Android\GalaxyNexus>fastboot reboot
rebooting...
finished. total time: 0.006s
I waited for the device to reboot (and to rebuild Dalvik Cache). It had an black screen all the time and 2 hours later I tried to reboot after pulling out the battery. Now it woun't even boot into Download Mode or Recovery Mode, the screen just stays black. I've searched the xda-forum and found that I should try OMAP Flash.
I found this Thread ([SOLVED]Nexus brick. OMAP Flash Tutorial in post 10) with a Link to this file (OMAPFlash_1229_2ndlastt.rar | 12.8 MB). The passwort is
Code:
dldteam
in case anyone stumping across this.
There were also some instructions:
For people that might encounter the same.
download https://rapidshare.com/files/1168981...Flash_tuna.zip and unpack the zip on desktop or w/e.
now when your omap4440 is recognized by device manager quickly double click and install drivers(you have about 2 seconds) select search drivers on pc and select desktop(drivers are in the above download.
When thr drivers are installed run the *.bat file in the download
after that u can get into download mode and odin flash a stock rom.
Click to expand...
Click to collapse
So following these instructions, I installed the drivers nd ran the .bat file it output the following:
Code:
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ.txt at line: 1
» -omap 4
» -t 36000
» -p OMAP4430_8G_HS
» -2
» chip_download EMMC Targets\Projects\espresso\MLO.hs
» chip_download EMMC Targets\Projects\espresso\Sbl.bin
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\espresso\omap4430hs_1200MHZ.txt
» @Targets\Projects\espresso\omap4430hs_1200MHZ.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 61 45 EF 06 7A C4 4C 8C DB DA C8 70 34 CB D0 DC 78 7C 3E A1
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2 25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4430_8G_HS 444007 01 HS
» Error no 2nd for: OMAP4430_8G_HS 444007 01 HS
Press any key to continue . . .
So what does that mean? What to do next? Is there still hope?
EDIT: see below for how I fixed it

Okay, so I looked at the file names and the file I downloaded is the following:
Code:
OMAPFlash_1229_2ndlastt
with
Code:
28.12.2011 15:12 649 omap4430hs_espresso_1200MHZ.bat
and this was kind of strange because the device is listed in the device manager as OMAP4440 and the .bat file is listed as OMAP4430 so I googled a little and found this file (OMAPFlash_tuna.zip)
Code:
www(DOT)dropbox(DOT)com/s/gzcu9fpwwz55u7l/OMAPFlash_tuna.zip
Inside this .zip lies a .bat file named
Code:
omap4460_tuna_hs_pro.bat
which I ran and the output was different this time:
Code:
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 61 45 EF 06 7A C4 4C 8C DB DA C8 70 34 CB D0 DC 78 7C 3E A1
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2 25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.signed.2nd.hs_pro
» Entering parameter file:omapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter file:omapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpapi_base 0x00030400
» Downloading driver
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x0F940000BEC7 // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000BEC7 // Product serial number
eMMC CID MDT = 0xBE // Manufacturing date
eMMC CID CRC = 0x63 // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification version
eMMC CSD TAAC = 0x27 // Data read access-time 1
eMMC CSD NSAC = 0x01 // Data read access-time 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for read allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalignment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignment
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @ VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @ VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @ VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @ VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multiplier
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size multiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data block length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for write allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection application
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write protection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write protection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Sets
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write sector count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Performance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Performance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Performance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Performance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Performance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Performance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MHz at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MHz at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MHz at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MHz at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure version
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revision
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory content
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase group definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.536 (87985 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
» Sending data (131072 bytes) :::::::::::::::::::: [131072]
» Downloading complete
» Elapsed time: 0:00.318 (412176 bytes/s)
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpapi_base 0x00030400
» Downloading driver
EMMC eMMC DRIVER DEINIT COMPLETE
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x0F940000BEC7 // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000BEC7 // Product serial number
eMMC CID MDT = 0xBE // Manufacturing date
eMMC CID CRC = 0x63 // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification version
eMMC CSD TAAC = 0x27 // Data read access-time 1
eMMC CSD NSAC = 0x01 // Data read access-time 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for read allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalignment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignment
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @ VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @ VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @ VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @ VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multiplier
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size multiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data block length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for write allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection application
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write protection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write protection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Sets
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write sector count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Performance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Performance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Performance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Performance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Performance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Performance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MHz at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MHz at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MHz at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MHz at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure version
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revision
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory content
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase group definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.477 (98867 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\sbl.img'
» Sending data (1835008 bytes) :::::::::::::::::::: [1835008]
» Downloading complete
» Elapsed time: 0:01.673 (1146880 bytes/s)
» cold_sw_reset
» Elapsed time: 0:13.650
Press any key to continue . . .
After that the phone unplugged and replugged itself as OMAP4440 every 2 seconds. I inserted the battery and it boots into fastboot now.
Code:
C:\Users\Lmbda>fastboot devices
0149A4[...] fastboot
Though I'm not sure what to flash now. Any help?

Ok, this time I followed this Thread ([GUIDE] Flashing a Factory Image with fastboot / return to stock). The output is as follows:
Code:
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot devices
0149A4[...] fastboot
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot erase boot
erasing 'boot'...
OKAY [ 0.004s]
finished. total time: 0.005s
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 0.024s]
finished. total time: 0.025s
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot erase recovery
erasing 'recovery'...
OKAY [ 0.167s]
finished. total time: 0.168s
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot erase system
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 0.008s]
finished. total time: 0.009s
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot erase userdata
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 0.537s]
finished. total time: 0.538s
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot flash bootloader bootloader-maguro-primelc03.img
sending 'bootloader' (2308 KB)...
OKAY [ 0.220s]
writing 'bootloader'...
OKAY [ 0.275s]
finished. total time: 0.497s
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.003s]
finished. total time: 0.004s
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot flash radio radio-maguro-i9250xxlh1.img
sending 'radio' (12288 KB)...
OKAY [ 1.155s]
writing 'radio'...
OKAY [ 1.376s]
finished. total time: 2.533s
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.008s]
finished. total time: 0.009s
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>fastboot -w update image-yakju-jop40d.zip
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: PRIMELC03
Baseband Version.....: I9250XXLH1
Serial Number........: 0149A4[...]
--------------------------------------------
checking product...
OKAY [ 0.007s]
checking version-bootloader...
OKAY [ 0.009s]
checking version-baseband...
OKAY [ 0.009s]
sending 'boot' (4400 KB)...
OKAY [ 0.417s]
writing 'boot'...
OKAY [ 0.272s]
sending 'recovery' (4900 KB)...
OKAY [ 0.463s]
writing 'recovery'...
OKAY [ 0.546s]
erasing 'system'...
OKAY [ 0.014s]
sending 'system' (425775 KB)...
OKAY [ 39.463s]
writing 'system'...
FAILED (remote: Write Fail)
finished. total time: 47.824s
C:\Android\yakju-jop40d-factory-279cdc5d\yakju-jop40d>
And after some googling I found this Thread (unable to wipe, factory reset or flash rom cwm or fastboot) which seems to be what I got into. I started from stock rom without any modifications and now I can't write to /system anymore. As in the Thread has been stated the NAND chip seems to be faulty.

Progress?
Hey did you get anywhere with this?
I think I damaged some partitions on my Nexus Q, and was going to try OMAPFlash to fix them.

HomeR365 said:
Hey did you get anywhere with this?
I think I damaged some partitions on my Nexus Q, and was going to try OMAPFlash to fix them.
Click to expand...
Click to collapse
Hey,
The OMAP Flash worked. I can boot now into Fastboot. But I am not able to flash any ROM.
I didn't try after though. I want to send it to repair but still waiting for a result from someone else.

Noob q
Lmbda said:
Okay, so I looked at the file names and the file I downloaded is the following:
Code:
OMAPFlash_1229_2ndlastt
with
Code:
28.12.2011 15:12 649 omap4430hs_espresso_1200MHZ.bat
and this was kind of strange because the device is listed in the device manager as OMAP4440 and the .bat file is listed as OMAP4430 so I googled a little and found this file (OMAPFlash_tuna.zip)
Code:
www(DOT)dropbox(DOT)com/s/gzcu9fpwwz55u7l/OMAPFlash_tuna.zip
Inside this .zip lies a .bat file named
Code:
omap4460_tuna_hs_pro.bat
which I ran and the output was different this time:
Code:
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 61 45 EF 06 7A C4 4C 8C DB DA C8 70 34 CB D0 DC 78 7C 3E A1
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2 25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.signed.2nd.hs_pro
» Entering parameter file:omapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter file:omapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpapi_base 0x00030400
» Downloading driver
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x0F940000BEC7 // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000BEC7 // Product serial number
eMMC CID MDT = 0xBE // Manufacturing date
eMMC CID CRC = 0x63 // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification version
eMMC CSD TAAC = 0x27 // Data read access-time 1
eMMC CSD NSAC = 0x01 // Data read access-time 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for read allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalignment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignment
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @ VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @ VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @ VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @ VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multiplier
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size multiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data block length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for write allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection application
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write protection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write protection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Sets
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write sector count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Performance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Performance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Performance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Performance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Performance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Performance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MHz at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MHz at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MHz at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MHz at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure version
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revision
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory content
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase group definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.536 (87985 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
» Sending data (131072 bytes) :::::::::::::::::::: [131072]
» Downloading complete
» Elapsed time: 0:00.318 (412176 bytes/s)
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpapi_base 0x00030400
» Downloading driver
EMMC eMMC DRIVER DEINIT COMPLETE
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0x0F940000BEC7 // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000BEC7 // Product serial number
eMMC CID MDT = 0xBE // Manufacturing date
eMMC CID CRC = 0x63 // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification version
eMMC CSD TAAC = 0x27 // Data read access-time 1
eMMC CSD NSAC = 0x01 // Data read access-time 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for read allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalignment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignment
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @ VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @ VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @ VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @ VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multiplier
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size multiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data block length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for write allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection application
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write protection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write protection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Sets
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write sector count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Performance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Performance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Performance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Performance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Performance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Performance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MHz at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MHz at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MHz at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MHz at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure version
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revision
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory content
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase group definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:00.477 (98867 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\sbl.img'
» Sending data (1835008 bytes) :::::::::::::::::::: [1835008]
» Downloading complete
» Elapsed time: 0:01.673 (1146880 bytes/s)
» cold_sw_reset
» Elapsed time: 0:13.650
Press any key to continue . . .
After that the phone unplugged and replugged itself as OMAP4440 every 2 seconds. I inserted the battery and it boots into fastboot now.
Code:
C:\Users\Lmbda>fastboot devices
0149A4[...] fastboot
Though I'm not sure what to flash now. Any help?
Click to expand...
Click to collapse
Hey bud, i'm experiencing similar problems and want to do this, however the phone was fine before hand and i've the lock screen before it went black, however i need to save the data URGENTLY. Did this delete your personal data or just patch system files to get it to boot?

GadgetDocDroid said:
Hey bud, i'm experiencing similar problems and want to do this, however the phone was fine before hand and i've the lock screen before it went black, however i need to save the data URGENTLY. Did this delete your personal data or just patch system files to get it to boot?
Click to expand...
Click to collapse
Hey mate, I'm not sure since some other step could have deleted everything but some did. I guess when you do a OMAP flash everything is too late anyway but you can still try to save your data.

RE:
Lmbda said:
Hey mate, I'm not sure since some other step could have deleted everything but some did. I guess when you do a OMAP flash everything is too late anyway but you can still try to save your data.
Click to expand...
Click to collapse
Cheers bud, i'm not going to take this step for now, i'll narrow down my such as fine as i can before resorting to this, although i believe you're 100% correct, it'd be great if someone could provide any more info on it for future readers. Thanks again. :good:

AFAIK, the drivers installed properly, and the bat file succeeded (i got the same output as you).
But I still can't boot into odin or fastboot. Idk what else i can do?

Galaxy Nexus Bricked (OMAPFlash error)
My Galaxy Nexus is also bricked but it is seen in the DevMgr as OMAP4440 for like 2 seconds before disconnecting. I managed to update the driver and now it is seen as OMAP4460 in the DevMgr and I have proceeded to use OMAPFlash_tuna. I have downloaded the drivers correctly this is the output I get when I run the batch file... It just hangs on the eMMC download driver part. Has anyone had this issue or could anyone shed some light on a solution.
Thanks!
---------------------------------------------------------------------------------------------------------------------------------------------
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 0F C3 65 BB 91 9A F0 9E 79 A7 46 4B 2C 0B 72
CE E6 52 9F 9B
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter filemapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter filemapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver

[Q] Stock Nexus wont boot - but I can get OMAP4440

Hi,
Yesterday my stock nexus died suddenly. It had 16% charge, and wasnt dropped, immersed in water etc. Its unlocked, not rooted, and running Jelly Bean 4.2.something.
Ive swapped the battery (I have 2), and it wont boot. The USB cable is fine, and Ive had it on charge etc.
I can occasionally get a connection in my Windows 7 VM, where the device is identified as OMAP4440, but im unsure how to proceed from here in getting it recovered.
I dont get any option on screen to use recovery mode etc as i dont get anything on screen. (Im sure the screen is fine - theres no damage etc and it was in my hand when it died).
I have a MAC and windows (via VM), so am flexible on boot options.
All help gratefully received.

Can you even get into fastboot?
Hold (VOL UP) + (VOL DOWN) + POWER
Until you get you get a vibration.

iLeopard said:
Can you even get into fastboot?
Hold (VOL UP) + (VOL DOWN) + POWER
Until you get you get a vibration.
Click to expand...
Click to collapse
No - ive tried various combinations. Ive had intermittent success just holding the power button and getting the OMAP notification.

eskimofisherman said:
Hi,
Yesterday my stock nexus died suddenly. It had 16% charge, and wasnt dropped, immersed in water etc. Its unlocked, not rooted, and running Jelly Bean 4.2.something.
Ive swapped the battery (I have 2), and it wont boot. The USB cable is fine, and Ive had it on charge etc.
I can occasionally get a connection in my Windows 7 VM, where the device is identified as OMAP4440, but im unsure how to proceed from here in getting it recovered.
I dont get any option on screen to use recovery mode etc as i dont get anything on screen. (Im sure the screen is fine - theres no damage etc and it was in my hand when it died).
I have a MAC and windows (via VM), so am flexible on boot options.
All help gratefully received.
Click to expand...
Click to collapse
There seems to have been a similar problem...maybe can help you.

» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 B0 59 ED F4 3F 64 00 6A 8A C5 6B C2 D6 17 AD
C1 97 EE 8F 69
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter filemapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter filemapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x01
MMC data_width_support = 0x01
MMC transfer_clk_max = 0x4E20
MMC card_size = 0xF4E0
eMMC CID MID = 0x02 // Manufacturer ID
eMMC CID CBX = 0x00 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0xFFFF000029BD // Product name
eMMC CID PRV = 0x90 // Product revision
eMMC CID PSN = 0x000029BD // Product serial numbe
r
eMMC CID MDT = 0x29 // Manufacturing date
eMMC CID CRC = 0x5E // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x02 // CSD structure
eMMC CSD SPEC_VERS = 0x03 // System specification
version
eMMC CSD TAAC = 0x0F // Data read access-tim
e 1
eMMC CSD NSAC = 0x00 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x2A // Max. bus clock frequ
ency
eMMC CSD CCC = 0x0015 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x01 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x007A // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x00 // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x1F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x55 // CRC
MMC get_mmc_info failed
EMMC eMMC DRIVER DEINIT COMPLETE
» Download failed (final data response error): Remote: : Driver init error 0xF20
55006 - MMC CONFIG FAILURE
» Elapsed time: 0:01.081 (47160 bytes/s)
» Operation FAILED (Remote: : Driver init error 0xF2055006 - MMC CONFIG FAILURE)
» Elapsed time: 1:41.496
Presione una tecla para continuar . . .
i tried without battery but doesnt conecct and i insert the battery i get this error to unbrick please help me

Problem: FASTBOOT MODE - NO BOOT OR RECOVERY IMG

Hi all,
I've got a normal I9250 Gnex phone from a friend with some starting problems. Everything was fine so far, bootloader has never been unlocked and no custom things were installed.
Now, every time when phone is started it will load into fastboot mode with an error "FASTBOOT MODE - NO BOOT OR RECOVERY IMG". Bootloader LOCKED.
The only thing I can do so far is to reload the bootloader again or to switch phone off. When phone is off I can boot into Odin by pushing Vol. down + Power. This is all I can do.
When I connect the phone to the PC the phone is recognized in bootloader as well as Odin. So PC drivers are installed correctly.
When I try to get bootloader unlock with adb fastboot oem unlock I get a message on phone where I can unlock bootloader. But when i select YES and push Powerbutton the phone hangs up.
Can someome help me?

Just tried an OMAP Flash:
» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt at line
: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn off device
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 BC 08 87 6C B9 0C A1 D3 4A D9 D1 E9 6D 3C 5C
04 E4 9F 51 B8
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.si
gned.2nd.hs_pro
» Entering parameter filemapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460
_tuna_8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna_8g.txt
» Leaving parameter filemapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpap
i_base 0x00030400
» Downloading driver
» Downloading 'Targets\Flash-Drivers\emmc_drv.bin'
» Sending data (47160 bytes) :::::::::::::::::::: [47160]
Interface 'OMAPFLASH DRIVER v6'
Driver 'eMMC JESD84-A43'
Driver configuration: sid = 0x00000000
Driver configuration: width = 0x00000004
Driver configuration: delay = 0x00000009
Driver configuration: rpapi_base = 0x00030400
MMC sid = 0x00
MMC mmc_volt = 0x01
MMC data_width = 0x04
MMC card_rca = 0x04
MMC card_type = 0x03
MMC data_width_support = 0x08
MMC transfer_clk_max = 0xBB80
MMC card_size = 0x1D5A000
eMMC CID MID = 0x15 // Manufacturer ID
eMMC CID CBX = 0x01 // Card/BGA
eMMC CID OID = 0x00 // OEM/Application ID
eMMC CID PNM = 0xD44D0000BE4F // Product name
eMMC CID PRV = 0x25 // Product revision
eMMC CID PSN = 0x0000BE4F // Product serial numbe
r
eMMC CID MDT = 0xBE // Manufacturing date
eMMC CID CRC = 0x27 // CRC7 checksum
eMMC CSD CSD_STRUCTURE = 0x03 // CSD structure
eMMC CSD SPEC_VERS = 0x04 // System specification
version
eMMC CSD TAAC = 0x27 // Data read access-tim
e 1
eMMC CSD NSAC = 0x01 // Data read access-tim
e 2 in CLK cycles (NSAC*100)
eMMC CSD TRAN_SPEED = 0x32 // Max. bus clock frequ
ency
eMMC CSD CCC = 0x00F5 // Card command classes
eMMC CSD READ_BL_LEN = 0x09 // Max. read data block
length
eMMC CSD READ_BL_PARTIAL = 0x00 // Partial blocks for r
ead allowed
eMMC CSD WRITE_BLK_MISALIGN = 0x00 // Write block misalign
ment
eMMC CSD READ_BLK_MISALIGN = 0x00 // Read block misalignm
ent
eMMC CSD DSR_IMP = 0x00 // DSR implemented
eMMC CSD C_SIZE = 0x00FF // Device size
eMMC CSD VDD_R_CURR_MIN = 0x06 // Max. read current @
VDD min
eMMC CSD VDD_R_CURR_MAX = 0x06 // Max. read current @
VDD max
eMMC CSD VDD_W_CURR_MIN = 0x06 // Max. write current @
VDD min
eMMC CSD VDD_W_CURR_MAX = 0x06 // Max. write current @
VDD max
eMMC CSD C_SIZE_MULT = 0x01 // Device size multipli
er
eMMC CSD ERASE_GRP_SIZE = 0x1F // Erase group size
eMMC CSD ERASE_GRP_MULT = 0x1F // Erase group size mul
tiplier
eMMC CSD WP_GRP_SIZE = 0x0F // Write protect group
size
eMMC CSD WP_GRP_ENABLE = 0x01 // Write protect group
enable
eMMC CSD DEFAULT_ECC = 0x00 // Manufacturer default
ECC
eMMC CSD R2W_FACTOR = 0x02 // Write speed factor
eMMC CSD WRITE_BL_LEN = 0x09 // Max. write data bloc
k length
eMMC CSD WRITE_BL_PARTIAL = 0x00 // Partial blocks for w
rite allowed
eMMC CSD CONTENT_PROT_APP = 0x00 // Content protection a
pplication
eMMC CSD FILE_FORMAT_GRP = 0x00 // File format group
eMMC CSD COPY = 0x01 // Copy flag (OTP)
eMMC CSD PERM_WRITE_PROTECT = 0x00 // Permanent write prot
ection
eMMC CSD TMP_WRITE_PROTECT = 0x00 // Temporary write prot
ection
eMMC CSD FILE_FORMAT = 0x00 // File format
eMMC CSD ECC = 0x00 // ECC code
eMMC CSD CRC = 0x33 // CRC
eMMC EXT_CSD S_CMD_SET = 0x00 // Supported Command Se
ts
eMMC EXT_CSD BOOT_INFO = 0x15 // Boot information
eMMC EXT_CSD BOOT_SIZE_MULTI = 0x0A // Boot partition size
eMMC EXT_CSD ACC_SIZE = 0x07 // Access size
eMMC EXT_CSD HC_ERASE_GRP_SIZE = 0x00 // High-capacity erase
unit size
eMMC EXT_CSD ERASE_TIMEOUT_MULT = 0x04 // High-capacity erase
timeout
eMMC EXT_CSD REL_WR_SEC_C = 0x07 // Reliable write secto
r count
eMMC EXT_CSD HC_WP_GRP_SIZE = 0x01 // High-capacity write
protect group size
eMMC EXT_CSD S_C_VCC = 0x01 // Sleep current (VCC)
eMMC EXT_CSD S_C_VCCQ = 0x01 // Sleep current (VCCQ)
eMMC EXT_CSD S_A_TIMEOUT = 0x07 // Sleep/awake timeout
eMMC EXT_CSD SEC_COUNT = 0x01D5A000 // Sector Count
eMMC EXT_CSD MIN_PERF_W_8_52 = 0xA0 // Minimum Write Perfor
mance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_52 = 0x00 // Minimum Read Perform
ance for 8bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_8_26_4_52 = 0x00 // Minimum Write Perfor
mance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_R_8_26_4_52 = 0x00 // Minimum Read Perform
ance for 8bit at 26MHz, for 4bit at 52MHz
eMMC EXT_CSD MIN_PERF_W_4_26 = 0x00 // Minimum Write Perfor
mance for 4bit at 26MHz
eMMC EXT_CSD MIN_PERF_R_4_26 = 0x00 // Minimum Read Perform
ance for 4bit at 26MHz
eMMC EXT_CSD PWR_CL_26_360 = 0x00 // Power class for 26MH
z at 3.6V
eMMC EXT_CSD PWR_CL_52_360 = 0x00 // Power class for 52MH
z at 3.6V
eMMC EXT_CSD PWR_CL_26_195 = 0x00 // Power class for 26MH
z at 1.95V
eMMC EXT_CSD PWR_CL_52_195 = 0x00 // Power class for 52MH
z at 1.95V
eMMC EXT_CSD CARD_TYPE = 0x01 // Card type
eMMC EXT_CSD CSD_STRUCTURE = 0x00 // CSD structure versio
n
eMMC EXT_CSD EXT_CSD_REV = 0x00 // Extended CSD revisio
n
eMMC EXT_CSD CMD_SET = 0x02 // Command set
eMMC EXT_CSD CMD_SET_REV = 0x05 // Command set revision
eMMC EXT_CSD POWER_CLASS = 0x00 // Power class
eMMC EXT_CSD HS_TIMING = 0x00 // High-speed interface
timing
eMMC EXT_CSD BUS_WIDTH = 0x00 // Bus width mode
eMMC EXT_CSD ERASED_MEM_CONT = 0x00 // Erased memory conten
t
eMMC EXT_CSD BOOT_CONFIG = 0x00 // Boot configuration
eMMC EXT_CSD BOOT_BUS_WIDTH = 0x00 // Boot bus width1
eMMC EXT_CSD ERASE_GROUP_DEF = 0x00 // High-density erase g
roup definition
EMMC eMMC DRIVER INIT COMPLETE
» Downloading complete
» Elapsed time: 0:01.400 (33680 bytes/s)
» End loading driver
» Downloading
» Downloading 'Targets\Projects\tuna\MLO_4460_HS_PRO'
» Sending data (131072 bytes) ::::::::::.......... [65536]
Click to expand...
Click to collapse
It seems phone will stuck at this. The emmc was updated before successfully.
Don't know what this could mean now...

Bolemichel said:
Just tried an OMAP Flash:
It seems phone will stuck at this. The emmc was updated before successfully.
Don't know what this could mean now...
Click to expand...
Click to collapse
did you try flashing with odin?

samersh72 said:
did you try flashing with odin?
Click to expand...
Click to collapse
Yes and it worked sucessfully everytime for some tar files. Got no errors.
But when phone reboots I saw lots of thin white lines on the screen, no boot so far. No reaction. The only thing i could do is to pull battery out.
Edit: For example I also tried these restore stock packages from here: http://forum.xda-developers.com/showthread.php?t=2065470 and other files who make full flash of bootloader etc. and never received an error. Only boot up ends immediatelly in white lines.
May be broken chip or something with corrupt partitions!?

Bolemichel said:
Yes and it worked sucessfully everytime for some tar files. Got no errors.
But when phone reboots I saw lots of thin white lines on the screen, no boot so far. No reaction. The only thing i could do is to pull battery out.
Edit: For example I also tried these restore stock packages from here: http://forum.xda-developers.com/showthread.php?t=2065470 and other files who make full flash of bootloader etc. and never received an error. Only boot up ends immediatelly in white lines.
May be broken chip or something with corrupt partitions!?
Click to expand...
Click to collapse
i guess it is a hardware failure.

dsairda the
samersh72 said:
i guess it is a hardware failure.
Click to expand...
Click to collapse
ok thank you. Meanwhile this is also what I assume.
May be it is interessting though: I get an error when I flash a pit file with Odin. Will try this tommorow again to get the error message.

Develop Bugs

welcome

Galaxy Nexus GSM - Bricked. Totally. - Samsung Galaxy Nexus

Use nexus toolkit and flash image stock from google Sent from my Galaxy Nexus using xda premium

I already tried that. The process just comes to a halt and it freezes up. I then have to unplug the battery to restart the phone.+

Try this: http://forum.xda-developers.com/showthread.php?t=1925468

Mach3.2 said: Try this: http://forum.xda-developers.com/showthread.php?t=1925468 Click to expand... Click to collapse Thanks for the tip, but the links aren't working anymore.

And I don't have his issues. I can boot up in Odin Mode + Fastbood Mode without problems. Only thing I can't boot up in is Recovery Mode.

are you seeing a android on his back with a explanation point? that is stock recovery if thats the case. vul up and power (maybe vol down and power) will get the menu for stock recovery.

When I'm trying to flash the phone with a new PIT and a original ROM i get a error message saying "There is no PIT partition".

Dude, uncheck "re-partition"! Don't do it ever again unless you know you really need it. I've never seen a single pit file for nexus. Only for Samsung phones (I know who manufactured gnez). Sent from my Galaxy Nexus using xda premium

No problem I wasn't precise enough, thanks a lot for pit, cheers

Solved?? ...from the bootloader is not hard to install a factory image. If you want ask, but look around for the documentation. I m curious if is a problem of partition table. I have never seen before for gnex (maybe I am ignorant)

Related

Galaxy Nexus will not go into bootloader/fastboot/ODIN/download mode.

HELP Galaxy Nexus Bricked!

[Q] Galaxy Nexus bricked, OMAP Flash? (kinda SOLVED)

[Q] Stock Nexus wont boot - but I can get OMAP4440

Problem: FASTBOOT MODE - NO BOOT OR RECOVERY IMG

Categories

Resources