Develop Bugs

HBOOT Questions

I feel like I ask a lot of these, but for being such a small thing, HBOOT is pretty complex.
So my first question is, in HBOOT, what is the difference between PVT and EVT1? I currently have 2 WFS and both are Marvelc. The HBOOT of the older Marvelc says:
Code:
MARVELC EVT1 SHIP S-ON RL
The other HBOOT says:
Code:
MARVELC PVT SHIP S-ON RL
The HBOOT of the older one is 1.09.0000, the HTCDev HBOOT for unlocking. The HBOOT of the newer phone is 1.10.0001, the bootloader from the newest FOTA update.
Another question I have is can 1.10.0001 be S-OFF'd or am I out of luck with S-OFFing my phone now? I know I can use bltool and superversion and what-not, but I've never had much luck with that.

Hboot questions
Yes, you can S-off Hboot 1.10 but Hboot 1.09 is better in my opinion. When I started flashing Roms with Hboot 1.10 and I would go back to stock my wifi would always show error and no one has figured that out yet. Best way to go back to Hboot 1.09 is to run football's RUU for the Marvelc, once it is running go to the temp folder and copy the ROM.zip wherever you want it. Close everything and then open the ROM.zip and extract the recovery, boot, system to the folder where fastboot is. Make sure you have USB debugging before turning off your phone. Turn off your phone, pull the battery out once it's off and put it back in, hold vol down and power, then highlight fastboot and do the following:
(if you are already rooted make sure you wipe the dalvik-cache before flashing and after flashing a factory reset)
Open Cmd prompt and do the following:
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash system.img
You will still have S-off and bootloader will be unlocked as well.
Now flash your custom recovery. Hope that helped out.

kalaker said:
I feel like I ask a lot of these, but for being such a small thing, HBOOT is pretty complex.
So my first question is, in HBOOT, what is the difference between PVT and EVT1? I currently have 2 WFS and both are Marvelc. The HBOOT of the older Marvelc says:
Code:
MARVELC EVT1 SHIP S-ON RL
The other HBOOT says:
Code:
MARVELC PVT SHIP S-ON RL
The HBOOT of the older one is 1.09.0000, the HTCDev HBOOT for unlocking. The HBOOT of the newer phone is 1.10.0001, the bootloader from the newest FOTA update.
Another question I have is can 1.10.0001 be S-OFF'd or am I out of luck with S-OFFing my phone now? I know I can use bltool and superversion and what-not, but I've never had much luck with that.
Click to expand...
Click to collapse
I used the goldcard method to S-off my 1.10 and have been able to do everything ive wanted with it aslong as it is MarvelC. But i would use TeamWin for recovery i had problems not being able to wipe completely with ClockMod. Good Luck!

Hey where can I find football's ruu?
Sent from my Marvelc using xda app-developers app

This noob needs your help. Boot-loop?

I believe my phone is on boot-loop while I was trying to get custom roms to flash. Boot loader is unlocked obviously, i have cwm 6.0.1.5 and when im in HBOOT it shows
*** UNLOCKED ***
PRIMOC PVT SHIP S-ON RL
HBOOT- 1.53.0000
RADIO- 1.00.00.0928
MAY 14 2012, 20:27:38
Also when i get on HBOOT, i says
pk76diag.zip
no img
pk76diag.nbh
no img or wrong img
pk76img.zip
no img
pk76img.nbh
no img or wrong img
pk76img.tar
no img
pk76img.aes
no img
pk76img.enc
no img
The phone is from Virgin Mobile so... any help plz.

Its not boot loop.... This is normal..... Use the volume keys and reboot ur fone....

Look in the General section for a tutorial on how to fix this. You have the updated radio, which is causing the boot loop.

[Q] Htc desire hd(ace) is frozen in white screen(whith htc logo)

Hi all;
I have a htc desire hd. I decided to put an 4,3 JB android on my device. I unlocked my bootloader, changed recovery with clockworkmod recovery v5.8.1.5 and i flashed the new rom(i tried JT 4,3 and revolution hd). When I rebooted my phone appear a white screen and htc logo. And nothing else.
Phone info:
***RELOCKED***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011,14:28:19
The phone is working but I can't use the os. Somebody help me. PLS
Sorry for bad grammar..
Thanks!

Another Rom
you can try to flash another rom

erwin96 said:
Hi all;
I have a htc desire hd. I decided to put an 4,3 JB android on my device. I unlocked my bootloader, changed recovery with clockworkmod recovery v5.8.1.5 and i flashed the new rom(i tried JT 4,3 and revolution hd). When I rebooted my phone appear a white screen and htc logo. And nothing else.
Phone info:
***RELOCKED***
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011,14:28:19
The phone is working but I can't use the os. Somebody help me. PLS
Sorry for bad grammar..
Thanks!
Click to expand...
Click to collapse
You need to re-unlock your bootloader, flash the ROM from recovery, and flash the boot.img from the ROM zip from fastboot.

Your s-on
Connect to computer then fastboot flash boot.IMG (from inside roms zip)
From the past

helpme please
JustPlayingHard said:
Your s-on
Connect to computer then fastboot flash boot.IMG (from inside roms zip)
From the past
Click to expand...
Click to collapse
hello can you help me install the new rom is that I probe three different roms I've done all the right things but always assumed that installing the new rom gets reset when htc logo forever and does not move?? ? can you help me please excuse the bad English but I speak Spanish xD

julio0991 said:
hello can you help me install the new rom is that I probe three different roms I've done all the right things but always assumed that installing the new rom gets reset when htc logo forever and does not move?? ? can you help me please excuse the bad English but I speak Spanish xD
Click to expand...
Click to collapse
what status you're bootloader phone..?
1. unlock with s-off or just 2. unlock but still s-on..?
if you're bootloader status (1)..then you just can install any new rom without manual flashing boot.img from rom.zip file it self..
but if you're bootloader status (2)..then you must do manual flashing that boot.img (extracted from rom.zip file) through fastboot with "fastboot flash boot boot.img" command from cmd after install any new rom (before booting new rom)..
hope you can understand my explanation..sorry for my bad english too..

HTC Desire HD stuck on boot screen.

Hello XDA Users,
I recently tried flashing a custom rom but it failed..
My device is stuck on a T-Mobile Boot screen and it doesn't go any further. it just hangs.
I can still boot into the H-Boot menu and try and fix it but i don't know how :crying:
I need help guys. Please.. My radio for the HTC Desire HD is 26.14.04.28.
This is what it says in the Menu,
***RELOCKED***
ACE PVT SHIP S-ON RL
H-BOOT 2.00.0029
MICROP-0438
RADIO-26.14.04.28
eMMC-Boot
Dec 22 2011,14:28:29
Anyone Please :crying::crying::crying: I need help getting back to stock.

Shahisa said:
Hello XDA Users,
I recently tried flashing a custom rom but it failed..
My device is stuck on a T-Mobile Boot screen and it doesn't go any further. it just hangs.
I can still boot into the H-Boot menu and try and fix it but i don't know how :crying:
I need help guys. Please.. My radio for the HTC Desire HD is 26.14.04.28.
This is what it says in the Menu,
***RELOCKED***
ACE PVT SHIP S-ON RL
H-BOOT 2.00.0029
MICROP-0438
RADIO-26.14.04.28
eMMC-Boot
Dec 22 2011,14:28:29
Anyone Please :crying::crying::crying: I need help getting back to stock.
Click to expand...
Click to collapse
Stock: run a RUU.
Restore custom ROM: re-unlock and fastboot flash the ROM zip's boot.img.

bananagranola said:
Stock: run a RUU.
Restore custom ROM: re-unlock and fastboot flash the ROM zip's boot.img.
Click to expand...
Click to collapse
Provide me with links and instructions. My Desire HD is carrier locked to T-Mobile.. I feel i messed up my phone whenever i turn the phone on, it hangs on the boot screen.

See where this link takes you. Hopefully it will help.
http://forum.xda-developers.com/showthread.php?t=1824379

Shahisa said:
Provide me with links and instructions.
Click to expand...
Click to collapse
Start with the Ace Think Tank thread in DHD General.

[Q] wildfire s (Re-Locked) unlocking bootloader

hey friends,
i have a real problem here, i have wildfire s a510 e and i want to flash custom Rom and Recovery, updated to ROM version 2.26.401.3
,Hboot S-OFF but Re-Locked , I've tried almost every method posted here, but every time i get stuck at "Fastboot flash unlocktoken unlock_code.bin .
anybody have any idea how to unlock the bootloader that has been relocked !?!
Here is my Hboot info.
MARVEL PVT SHIP S-OFF RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.57.39.10M
feb 8 2012,18:29:31
Thank you in advance

azee4ya said:
hey friends,
i have a real problem here, i have wildfire s a510 e and i want to flash custom Rom and Recovery, updated to ROM version 2.26.401.3
,Hboot S-OFF but Re-Locked , I've tried almost every method posted here, but every time i get stuck at "Fastboot flash unlocktoken unlock_code.bin .
anybody have any idea how to unlock the bootloader that has been relocked !?!
Here is my Hboot info.
MARVEL PVT SHIP S-OFF RL
HBOOT-1.09.0099
MICROP-0451
RADIO-7.57.39.10M
feb 8 2012,18:29:31
Thank you in advance
Click to expand...
Click to collapse
What exactly happens? You don't get the prompt screen? The command doesn't go through. Could you try to be more specific?

when given command "fastboot flash unlocktoken Unlock_code.bin" it gets stuck on uploading the unlock_code file,
i have unlock_code.bin file in the same folder as fastboot. phone is in Hboot/fastboot screen, USB drivers installed, everything as per instructions.
Hboot screen shows that phone is 'RELOCKED' but 'S OFF" .