frostyJB error - T-Mobile, Samsung Galaxy SIII

Hi Guys,
I will install FrostyJB_4.1.1 on my SGS3. I use this guide http://forum.xda-developers.com/showthread.php?t=1874063
Code:
E:Error in /sdcard/FrostyJB_4.1.1_Official-v11.2.1.zip
(Status 0)
Installation aborted.

I just went through this with the developer of Xtremepedia. What recovery are you using to flash Frosty? The problem is because of the Update vs Updater scripts. I think that if you use the LAtest TWRP, you shoudl be ok and get past that. If you are using CWR, you might want to go to Advanced>Toggle Scripts (I think. It has been a long time since I used CWR).

I installed today with Twrp no problems. I suggest installing that easiest way is from goo.im click install recovery script
Sent from my SGH-T999 using xda app-developers app

i use ClockworkMod Recovery v6.0.1.2

Related

[Q] clockwork recovery broke my phone

I was using rom manager recovery clockwork 3.x.x.x and since it wont flash any zips because there not edified, I went to xda developer site and found a an older recovery file 2.1.0.5 that I updated in the bootloader. Now the latter version wont flash anything and I keep getting this error when flashing anything.
assert failed: write_raw_image("/tmp/boot.img", "boot")
E: error in /sdcard/MIUI-evo-1.1.1.28-singned.zip
(status) 7
installation aborted.
Am I screwed?????
My wife has another evo same version. could I use hers to help with anything?
nevermind I fixed it.
tismo74 said:
nevermind I fixed it.
Click to expand...
Click to collapse
install Amon never have another problem
I've heard amon is so much better than clockeork.

[Q] CM10 flashing, first time question here

Hi, so I'm trying to make this quick so that i can install CM10 tonight...
so I rooted my phone tonight, did everything right and stuff, but I went to go download the CM10 nightly build for my phone which is the Rogers (Canadian version). So I download the d2att version, did a backup, wiped everything and I tried installing it using CWM-Based recovery v5.5.0.4. But when I tried install it gave me status 7 aborted. I installed cwm using odin3 v1.85, what am I doing wrong, am I trying to install the wrong version? Sorry if this is a noob question but I'm new to this stuff :/
thanks for any help
Can anyone explain to me how I can update CWM? I downloaded the latest img from their website, but idk how to install it...I'm really confused...and I really need help :crying:
Go look at QBKing77 videos on YouTube or QBKing77.com he has the best videos in my opinion and installing CM10 and CWM. I am on CM10.1 without any problems.
hmm, did you use the v5 recovery? Did it work, because the version i had was cwm 5.5 and I couldn't update because of system 7 error, which is because the CWM version was too old.
If possible, could you link me the one you used?
Ok..so now I installed TWRP and I tried flashing CM10 it still didnt work and gave me status 7 error and it says:
assert failed: getpro ("ro.product.device")
E: Error in /sdcard/cm- 10.....d2att.zip
Is this because with goomanager i installed it for the d2can version and now I can't install the d2att even though thats the only version i can use? goomanager only lets me get d2can...and when I try to install the never cwm recover img using android terminal it keeps giving me No such file or directory.
Can anybody help me with this...
PhoenixBlitz said:
Ok..so now I installed TWRP and I tried flashing CM10 it still didnt work and gave me status 7 error and it says:
assert failed: getpro ("ro.product.device")
E: Error in /sdcard/cm- 10.....d2att.zip
Is this because with goomanager i installed it for the d2can version and now I can't install the d2att even though thats the only version i can use? goomanager only lets me get d2can...and when I try to install the never cwm recover img using android terminal it keeps giving me No such file or directory.
Can anybody help me with this...
Click to expand...
Click to collapse
have you tried flashing another ROM, like an-aosp or aokp-based one? If you followed their instructions, it may help you determine whether it was a bad download or something s more specific to your device. just throwing this one out there....
captican said:
have you tried flashing another ROM, like an-aosp or aokp-based one? If you followed their instructions, it may help you determine whether it was a bad download or something s more specific to your device. just throwing this one out there....
Click to expand...
Click to collapse
oh...hahaha
I just flashed AOKP and everything worked great! Thanks for that little suggestion! Custom ROMs are now my favorite!
PhoenixBlitz said:
oh...hahaha
I just flashed AOKP and everything worked great! Thanks for that little suggestion! Custom ROMs are now my favorite!
Click to expand...
Click to collapse
If you want to flash a CM ROM you will need to be on the most current d2att recovery for either CWR or TWRP. If you were getting a status 7 error, I'm going to assume that you have a d2can phone.. make sure you have a d2att recovery and you'll be able to flash anything. ROM Manager will let you install CWR or Goo Manager will let you install TWRP (which is what I use).
BAM1789 said:
If you want to flash a CM ROM you will need to be on the most current d2att recovery for either CWR or TWRP. If you were getting a status 7 error, I'm going to assume that you have a d2can phone.. make sure you have a d2att recovery and you'll be able to flash anything. ROM Manager will let you install CWR or Goo Manager will let you install TWRP (which is what I use).
Click to expand...
Click to collapse
Yes, I highly recommend TWRP.
Sent from my SPH-D710 using xda premium
HeadBlader911 said:
Yes, I highly recommend TWRP.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I tried using TWRP but when I installed it through GooManager it installed the d2can version so I couldn't install CM10. Unless there is a way to manually select which TWRP version to install through GooManager, then I'm more or less stuck on CWM.
edit: Just got TWRP for d2att installed so now I can flash whatever I want, man TWRP seems a lot better than CWM!

[Q] error installing CM 10.1: "E: error in emmc/cm-10.1-20130222-NIGHTLY-d2att.zip"

[Q] error installing CM 10.1: "E: error in emmc/cm-10.1-20130222-NIGHTLY-d2att.zip"
I am trying to install the cm-10.1-20130222 nightly build on my AT&T sgs3. I have clockwork recovery mod v 5.5 installed already and my device is rooted.
When ever I select the zip file and proceed to installation in the recovery mode I get the following error:
E: error in emmc/cm-10.1-20130222-NIGHTLY-d2att.zip
followed by:
status 7
installation aborted
Any idea what I am doing wrong? I tried yesterdays (21st Feb's) nightly build too with similar results.
Re: [Q] error installing CM 10.1: "E: error in emmc/cm-10.1-20130222-NIGHTLY-d2att.zi
1.update your recovery
I suggest using TWRP if you aren't already
2.bad download
Re download ROM and try to flash again
Those two are literally the only reasons why you're getting that error.
Search or use Google next time since this has been covered 100s of times
Sent from my SGH-I747 using Tapatalk 2
Jayrokk's suggestion to update your recovery is correct. Cm10 requires the latest cwm version. There are flashable cwm zip resources online or you can update it in rom manager
Lookout Security -and that is a first- mentions the NIGHTLY download to be an Exploit.
Same warning for yesterdays Nightly.
jayRokk said:
1.update your recovery
I suggest using TWRP if you aren't already
2.bad download
Re download ROM and try to flash again
Those two are literally the only reasons why you're getting that error.
Search or use Google next time since this has been covered 100s of times
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
bousix said:
Lookout Security -and that is a first- mentions the NIGHTLY download to be an Exploit.
Same warning for yesterdays Nightly.
Click to expand...
Click to collapse
suppose you're using your phone to download
try use computer to download and then transfer over.

4.1.2 Update problem

I started posting on a thread in the general section but think it is better suited over here. I apologize for the double post but thought it would get more eyes with a suggestion on it over here.
I was running a Stock ROM, rooted and unlocked 4.1.1. I have not been able to update to 4.1.2. I tried using CWM, TWRP, stock recovery and ODIN. CWM and TWRP give an error and won't install the update. I completely reflashed to stock and downloaded the OTA using the stock method. It tries to udpate and stops. After restarting it gives a message that the update was interupted.
I have tried installing the update through stock recovery with the file on the external SD card and the following message appears.
The other message that comes up when trying to update through stock recovery is
assert failed: apply_patch_check("/system/app/Facelock.apk", :c0c83a8c5d02786abed70758022dce17e1fb3a6f", "1bel1a17f8063aba12220a38a38caa7b3382ec96bbeb")
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted
Flash stock rooted 4.1.2 in cwm or twrp, you can find it in room development, you need to flash modem and firmware first which you will find in loser skaters first post of stock rooted 4.1.2
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
It sounds like your stock Rom is rooted. Unroot and try again. Same thing happened top me this morning as i did the update.zip again for a project. Unrooted with SuperSU and then it ran like normal. Don't forget to back up your internal sd, as it will be wiped in the process
You can just flash the already rooted 4.1.2?
Unless you want to download it from att? Wouldn't make sense to me.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ajsedlacek said:
I started posting on a thread in the general section but think it is better suited over here. I apologize for the double post but thought it would get more eyes with a suggestion on it over here.
I was running a Stock ROM, rooted and unlocked 4.1.1. I have not been able to update to 4.1.2. I tried using CWM, TWRP, stock recovery and ODIN. CWM and TWRP give an error and won't install the update. I completely reflashed to stock and downloaded the OTA using the stock method. It tries to udpate and stops. After restarting it gives a message that the update was interupted.
I have tried installing the update through stock recovery with the file on the external SD card and the following message appears.
The other message that comes up when trying to update through stock recovery is
assert failed: apply_patch_check("/system/app/Facelock.apk", :c0c83a8c5d02786abed70758022dce17e1fb3a6f", "1bel1a17f8063aba12220a38a38caa7b3382ec96bbeb")
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
I had similar problem, but the error was with bootanimation. I found my original file and put it where the update was looking for it. I am willing to bet that the Facelock.apk is not in /system/app or there is a problem with that file.

[Q] NuSenseOne ROM install not working.

I tried to install the ROM from this link: http://forum.xda-developers.com/showthread.php?t=2631840
I'm running a ROM based off stock 4.3 for the Verizon HTC One, version 2.10.605.1 of the ROM on this page: http://forum.xda-developers.com/showthread.php?t=2485319
My my baseband is 1.12.41.1112_2.
I'm using Clockworkmod Recovery version 6.0.4.7, I wiped the Dalvik, data, system, and cache then tried to install the zip I had on the phone twice and both times I got this error:
format () expects 5 args, got 4
E:Error in /data/media/0/NuSenseONE-KitKat-m7vzw-s55-stock_RC1.0_020614.zip.
(Status 7)
Installation aborted.
I also tried using adb sideload and got this:
* failed to write data 'protocol fault (no status)' *
I used adb sideload for the ROM I'm currently on and my device is recognized when I use adb devices to check. The sideload gets to 100% then gives that message.
I was hoping to post straight to that first thread but since I'm a new member I was hoping somebody could help out? I already searched the thread for the ROM I'm installing and didn't find anything that helps me. Thanks!
DavidHawk62 said:
I tried to install the ROM from this link: http://forum.xda-developers.com/showthread.php?t=2631840
I'm running a ROM based off stock 4.3 for the Verizon HTC One, version 2.10.605.1 of the ROM on this page: http://forum.xda-developers.com/showthread.php?t=2485319
My my baseband is 1.12.41.1112_2.
I'm using Clockworkmod Recovery version 6.0.4.7, I wiped the Dalvik, data, system, and cache then tried to install the zip I had on the phone twice and both times I got this error:
format () expects 5 args, got 4
E:Error in /data/media/0/NuSenseONE-KitKat-m7vzw-s55-stock_RC1.0_020614.zip.
(Status 7)
Installation aborted.
I also tried using adb sideload and got this:
* failed to write data 'protocol fault (no status)' *
I used adb sideload for the ROM I'm currently on and my device is recognized when I use adb devices to check. The sideload gets to 100% then gives that message.
I was hoping to post straight to that first thread but since I'm a new member I was hoping somebody could help out? I already searched the thread for the ROM I'm installing and didn't find anything that helps me. Thanks!
Click to expand...
Click to collapse
Could be wrong...but, it could be a bad download.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
Try flashing twrp recovery.
As brholt6 mentioned, it sounds like a bad download. Redownload it and check the md5 before flashing again. If it still fails you should try what DavidHawk62 suggested and try TWRP. I've been using TWRP to flash since I got my One and have had zero problems. I'm currently on NuSense.
brholt6 said:
Could be wrong...but, it could be a bad download.
Sent from my HTC6500LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I redownloaded straight to my phone and tried it, redownloaded to my computer and tried adb again, but I still get the same error.
May just do what cmlusco and Crawshayi suggested and try TWRP.
Its not a bad download. Status 7 refers to an invalid argument in the zips update-script. It tells you the error is "format () expects 5 args, got 4". This means that in the update-script of the zip, it is calling to format a partition but was not given all the arguments needed to do so. It has to do with being on a newer recovery. You are probably going to find a lot of zips will fail with this error, while on your current recovery. The same issue happened when twrp was released. As i said flash twrp recovery and flash the zip thru it. Or try this one on your current recovery, where i modified it to have the correct arguments. DELETED
cmlusco said:
Its not a bad download. Status 7 refers to an invalid argument in the zips update-script. It tells you the error is "format () expects 5 args, got 4". This means that in the update-script of the zip, it is calling to format a partition but was not given all the arguments needed to do so. It has to do with being on a newer recovery that the zip has not been updated for yet. You are probably going to find a lot of zips will fail with this error, as they have not been updated either. The same issue happened when twrp was released. As i said flash twrp recovery and flash the zip thru it. Or try this one on your current recovery, where i modified it to have the correct arguments. []
Click to expand...
Click to collapse
Sorry, but I'm gonna ask you to remove that link.
Thanks
If there are issues with my zips please post in my thread.
You need the latest recovery for KitKat.
The ROM installs fine as is.
Sent from my One using Tapatalk
This is an issue related to using the latest cwm. 6.0.4.5 works perfectly.
Sent from my One using Tapatalk
Still have the issue
santod040 said:
Sorry, but I'm gonna ask you to remove that link.
Thanks
If there are issues with my zips please post in my thread.
You need the latest recovery for KitKat.
The ROM installs fine as is.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
I've been trying to update from Beta 1.04 to RC-1.0 on my m7vzw on CWM 6.0.4.7 and I'm getting this error as well. What am I doing wrong?
Love the ROM - it's my daily driver right now.
stewie3128 said:
I've been trying to update from Beta 1.04 to RC-1.0 on my m7vzw on CWM 6.0.4.7 and I'm getting this error as well. What am I doing wrong?
Love the ROM - it's my daily driver right now.
Click to expand...
Click to collapse
Use cwm 6.0.4.5
Sent from my HTC6500LVW using Tapatalk
disconnecktie said:
Use cwm 6.0.4.5
Sent from my HTC6500LVW using Tapatalk
Click to expand...
Click to collapse
Do I need to downgrade CWM thru adb or can I do that another way?
stewie3128 said:
Do I need to downgrade CWM thru adb or can I do that another way?
Click to expand...
Click to collapse
Use fastboot commands to flash it. There should be instructions in the recovery thread.
Sent from my HTC6500LVW using Tapatalk

Categories

Resources