PHONE NOT ENTERING DOWNLOAD OR RECOVERY MODE?
I HAVE FIGURED OUT THE SOLUTION FOR THIS ALMOST IMPOSSIBLE TO FIX ISSUE.
I WILL POST THE TUTORIAL LATER AFTER SCHOOL.
THIS METHOD WORKS FOR P930 / LU6200 / SU640 MODELS.
GOOD LUCK AND HAPPY UNBRICKING.:laugh:
RESERVED
:victory:
RESERVED
:laugh:
This is the way I fix it sir.
TURN OFF the device, remove and reinsert the battery. Don’t turn on yet, hold VOLUME UP BUTTON then connect to your PC, release button when download mode prompt is displayed.
Tested with two units of SU640 and an LU6200.
I think you can also do this with adb and fastboot.
DEAD POST. Sorry.
I'll post the TUT someday. I'm quite busy.
You are just a Junk!
mac20dnangel said:
DEAD POST. Sorry.
I'll post the TUT someday. I'm quite busy.
Click to expand...
Click to collapse
Hahahaha... Nice Effort Baby
Ok let me help you in my way,
Step1: - Flash Any Rootable LU6200 Version (Example: LU6200 v142)
Step2: - Root and Install CWM Recovery (Already Posted in Forum)
Step3: - For Download Mode, Press Vol+ and Insert USB Cable
Step4: - For CWM Press Vol- and Power On until Phone Viberate and On Logo (Press Power Button Text)
Good Luck! And Post Results
Note: - School Baby Please Keep Away from This Developers Forum! :victory:
Oh Baby?
moonmoon8 said:
Hahahaha... Nice Effort Baby
Ok let me help you in my way,
Step1: - Flash Any Rootable LU6200 Version (Example: LU6200 v142)
Step2: - Root and Install CWM Recovery (Already Posted in Forum)
Step3: - For Download Mode, Press Vol+ and Insert USB Cable
Step4: - For CWM Press Vol- and Power On until Phone Viberate and On Logo (Press Power Button Text)
Good Luck! And Post Results
Note: - School Baby Please Keep Away from This Developers Forum! :victory:
Click to expand...
Click to collapse
Wahahaha... I think you did not understand the Title of this Thread? I think you are the Baby here in XDA.
Your tutorial is not for a dead phone. It is on how to root and install custom recovery for LU6200.
Oh.. Baby Boy what's on your mind. It's full of fantasies. Hahaha
mac20dnangel said:
PHONE NOT ENTERING DOWNLOAD OR RECOVERY MODE?
I HAVE FIGURED OUT THE SOLUTION FOR THIS ALMOST IMPOSSIBLE TO FIX ISSUE.
I WILL POST THE TUTORIAL LATER AFTER SCHOOL.
THIS METHOD WORKS FOR P930 / LU6200 / SU640 MODELS.
GOOD LUCK AND HAPPY UNBRICKING.:laugh:
Click to expand...
Click to collapse
Do you mean “HS-USB QDLoader 9008” ? If you can solve that problem, that's a good news~
Could you post it?
Many thanks~~~~
mijuu said:
Do you mean “HS-USB QDLoader 9008” ? If you can solve that problem, that's a good news~
Could you post it?
Many thanks~~~~
Click to expand...
Click to collapse
Check here. Just use google translate.
http://bbs.gfan.com/forum.php?mod=viewthread&tid=4520374&ordertype=1
devcon69 said:
Check here. Just use google translate.
http://bbs.gfan.com/forum.php?mod=viewthread&tid=4520374&ordertype=1
Click to expand...
Click to collapse
I'm not sure how to follow this guide. I can't seem to make my phone appear on the check box.
mac20dnangel said:
PHONE NOT ENTERING DOWNLOAD OR RECOVERY MODE?
I HAVE FIGURED OUT THE SOLUTION FOR THIS ALMOST IMPOSSIBLE TO FIX ISSUE.
I WILL POST THE TUTORIAL LATER AFTER SCHOOL.
THIS METHOD WORKS FOR P930 / LU6200 / SU640 MODELS.
GOOD LUCK AND HAPPY UNBRICKING.:laugh:
Click to expand...
Click to collapse
oh yeah! this is what im waiting for! its like JTAG? oh yes! )) waiting or your instruction!
---------- Post added at 02:48 PM ---------- Previous post was at 02:33 PM ----------
mac20dnangel said:
PHONE NOT ENTERING DOWNLOAD OR RECOVERY MODE?
I HAVE FIGURED OUT THE SOLUTION FOR THIS ALMOST IMPOSSIBLE TO FIX ISSUE.
I WILL POST THE TUTORIAL LATER AFTER SCHOOL.
THIS METHOD WORKS FOR P930 / LU6200 / SU640 MODELS.
GOOD LUCK AND HAPPY UNBRICKING.:laugh:
Click to expand...
Click to collapse
vitamindy said:
I'm not sure how to follow this guide. I can't seem to make my phone appear on the check box.
Click to expand...
Click to collapse
can you please provide download links? no need for jtag?
@ ramica7
Try these links:
USB9008:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=4520374&ordertype=1
JTAG:
http://forum.gsmhosting.com/vbb/f665/help-pinuot-lg-lu6200-not-ok-pinouts-fixed-1555097/
http://www.gsmunite.com/vb/threads/2833-ORT-JTAG-LG-LU6200-Repair-Dead-Boot
http://forum.gsm-kishtwar.com/vbb/f4/ort-jtag-lg-lu6200-repair-dead-boot-1212/
devcon69 said:
@ ramica7
Try these links:
USB9008:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=4520374&ordertype=1
JTAG:
http://forum.gsmhosting.com/vbb/f665/help-pinuot-lg-lu6200-not-ok-pinouts-fixed-1555097/
http://www.gsmunite.com/vb/threads/2833-ORT-JTAG-LG-LU6200-Repair-Dead-Boot
http://forum.gsm-kishtwar.com/vbb/f4/ort-jtag-lg-lu6200-repair-dead-boot-1212/
Click to expand...
Click to collapse
thank you! but i already pay for jtag.. how sad..
i have one bricked p930. it is on a wierd connection mode. pc reads device a HID(not comport, installs right away) and ids are qualcomm but instead of 9008 like lu6200 and su640, it is F006. any ideas? already posted a topic in general section asking for help. i have jtag tools but i will do that as my last resort.
kinda...
mac20dnangel said:
PHONE NOT ENTERING DOWNLOAD OR RECOVERY MODE?
I HAVE FIGURED OUT THE SOLUTION FOR THIS ALMOST IMPOSSIBLE TO FIX ISSUE.
I WILL POST THE TUTORIAL LATER AFTER SCHOOL.
THIS METHOD WORKS FOR P930 / LU6200 / SU640 MODELS.
GOOD LUCK AND HAPPY UNBRICKING.:laugh:
Click to expand...
Click to collapse
hey dude, i saw that you've always have a post that discontinued/dead post huh?
PLEASE DELETE this post, This cannot HELP others! thanks gay.
Apparently he never returned from the school and moved on to LTE 2. This thread better be moved to junkyard or General Section
not getting download mode,
1: remove battery
2: plug in the usb cable (should be connected to pc also)
3: while pressing vol up insert battery
you should be in download mode now
if while in download mode the bottom 3 lights blinks or you just get 3 blinking lights, dont worry, charge your battery using external charger.
devcon69 said:
This is the way I fix it sir.
TURN OFF the device, remove and reinsert the battery. Don’t turn on yet, hold VOLUME UP BUTTON then connect to your PC, release button when download mode prompt is displayed.
Tested with two units of SU640 and an LU6200.
I think you can also do this with adb and fastboot.
Click to expand...
Click to collapse
Hi there..
i thinks have the same problem with my device it says error when entering on cmw recovery and its stuck there...
i try your suggestion but it stuck again in download mode...
is there other way to fix it?..
sam32smni said:
Hi there..
i thinks have the same problem with my device it says error when entering on cmw recovery and its stuck there...
i try your suggestion but it stuck again in download mode...
is there other way to fix it?..
Click to expand...
Click to collapse
Do a factory reset
Related
I downloaded ROM MANAGER app, and I used the option "Install ROM from SD CARD" to try to install the official ROM V20e.zip. During the process, and restart the device no longer functions.
the device gives no heartbeat, no charge, no power on. The PC does not recognize it when plugged into USB.
The device died ...
What do I do?
Thanks
RODELA said:
I downloaded ROM MANAGER app, and I used the option "Install ROM from SD CARD" to try to install the official ROM V20e.zip. During the process, and restart the device no longer functions.
the device gives no heartbeat, no charge, no power on. The PC does not recognize it when plugged into USB.
The device died ...
What do I do?
Thanks
Click to expand...
Click to collapse
You need to manually enter recovery. I don't have that phone so I don't kbiw if that rom is even the correct rom for your phone. To enter recovery on most devices hold volume up, home button and power. Roms are flashed in recovery not apps.
Sent from my SGH-I317 using xda app-developers app
markbencze said:
You need to manually enter recovery. I don't have that phone so I don't kbiw if that rom is even the correct rom for your phone. To enter recovery on most devices hold volume up, home button and power. Roms are flashed in recovery not apps.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
I can not enter in recovery mode because the device even power on! Any button not working
RODELA said:
I can not enter in recovery mode because the device even power on! Any button not working
Click to expand...
Click to collapse
And is your battery full? Does adb recognize it?
If the rom is definitely for your phone I don't believe you've actually hard bricked.
U may wanna check that
? http://bit.ly/18WHgY4 ?
markbencze said:
And is your battery full? Does adb recognize it?
If the rom is definitely for your phone I don't believe you've actually hard bricked.
U may wanna check that
Click to expand...
Click to collapse
Battery was arround 80%...
Adb Shell says: device not found.
This device is not sold in my contry (Brazil), and probaly LG will not make any kind of concert...
I'm losing hope
RODELA said:
Battery was arround 80%...
Adb Shell says: device not found.
This device is not sold in my contry (Brazil), and probaly LG will not make any kind of concert...
I'm losing hope
Click to expand...
Click to collapse
Search man. Dont give up yet. Are you 100% sure that rom u tried to flash was for your device? If it wasnt then yes u may have a brick. If you're sure it was thwn keep searching there may be hope still. Maybe even try the method u used to root in tge first place?
? http://bit.ly/18WHgY4 ?
It might bricked
At first make sure your battery is healthy and try to charge it,then use one of unbrick methods available,take your phone to download mode and flash one of official p936 *.KDZ roms
it's better to flash android 2.3 versions for unbricking
Sent from my LG-P930 using Tapatalk 2
try boot this way
hold vol. up while plug ur usb cable on pc the phone should enter in download mode if ur unable to enter in D/L Mode May bricked ur phone
---------- Post added at 10:38 AM ---------- Previous post was at 10:34 AM ----------
altvolt74 said:
hold vol. up while plug ur usb cable on pc the phone should enter in download mode if ur unable to enter in D/L Mode May bricked ur phone
Click to expand...
Click to collapse
if u see QHSUSB_DLOAD on ur PC Driver manager is posible that ur are hard bricked the only way to fix http://unlimited.io/qhsusbdload.htm (note) that this is for htc phone and u need Linux not sure if this will work on LG have carefull and good luck
markbencze said:
Search man. Dont give up yet. Are you 100% sure that rom u tried to flash was for your device? If it wasnt then yes u may have a brick. If you're sure it was thwn keep searching there may be hope still. Maybe even try the method u used to root in tge first place?
Click to expand...
Click to collapse
Sorry,, what is"tge"?
altvolt74 said:
hold vol. up while plug ur usb cable on pc the phone should enter in download mode if ur unable to enter in D/L Mode May bricked ur phone
---------- Post added at 10:38 AM ---------- Previous post was at 10:34 AM ----------
if u see QHSUSB_DLOAD on ur PC Driver manager is posible that ur are hard bricked the only way to fix [...]
Click to expand...
Click to collapse
Exactly, i see "QHSUS_DLOAD"....
I followed the procedure u indicate, but in the end appears "QDL reset", and the phone remains the same :/
HELPPP
RODELA said:
Exactly, i see "QHSUS_DLOAD"....
I followed the procedure u indicate, but in the end appears "QDL reset", and the phone remains the same :/
HELPPP
Click to expand...
Click to collapse
Yeah not good. Basically the phone is an expensive paper weight now. I had the same thing happen to me a few months back and had to get a new phone. Your options:
1. Contact your phone company and see if it can be handled under warranty.
2. Contact LG.....same thing.
3. Spend $50-$100 on having a third party fix your phone.
4. Buy an expensive j-tag box and hard restore your ROM: http://forum.xda-developers.com/showthread.php?t=1628254&page=1
Sent from my LG-P930 using xda app-developers app
HELLO BROTHERS AND FRIEND,
I AM USING LG OPTIMUS G F180S. AFTER UPDATING THE KITKAT VERSION, I WAS TRYING TO DEGRADE IT TO JELLYBEAM FOR ROOTING. AFTER COMPLETION UPGRATION, THE PHONE WAS STUCK IN LOGO MOOD. PLEASE HELP ME TO SOLVE THIS. PLEASE PLEASE PLEASE PLEASE.
pLEASE HELP ME BROTHER'S.
REGARDS IN ADVANCE AND ALWAYS.
CLICKANU
while updating again in download mode, it shows phone not found
clickanu said:
hello brothers and friend,
i am using lg optimus g f180s. After updating the kitkat version, i was trying to degrade it to jellybeam for rooting. After completion upgration, the phone was stuck in logo mood. Please help me to solve this. Please please please please.
Please help me brother's.
Regards in advance and always.
Clickanu
Click to expand...
Click to collapse
please help me
please help me
Now it shows this error (attached) while updating the file again
clickanu said:
please help me
please help me
Click to expand...
Click to collapse
help me please!!!!!!!
Help me please!!!!!
Regards
http://forum.xda-developers.com/showthread.php?t=2010624&page=49
Have you tried this method? Can you connect your phone in download mode?
Please see these attached files
clickanu said:
help me please!!!!!!!
Help me please!!!!!
Regards
Click to expand...
Click to collapse
while try to upgrading kitkat, it shows "extract file error" and after restart "the logo appears only"...see the video.
Please help me !!! Please someone help me dear (
regards..
Thanks for reply
ahmed xperia p said:
http://forum.xda-developers.com/showthread.php?t=2010624&page=49
have you tried this method? Can you connect your phone in download mode?
Click to expand...
Click to collapse
yes, i can connect the phone in download mode...
Regards,
clickanu said:
yes, i can connect the phone in download mode...
Regards,
Click to expand...
Click to collapse
Ok relax if you can connect in download mode 90% chances are your phone will be recovered.
---------- Post added at 11:46 PM ---------- Previous post was at 11:36 PM ----------
clickanu said:
yes, i can connect the phone in download mode...
Regards,
Click to expand...
Click to collapse
What kdz are you trying to flash? Broken kdz file also results in extract error, try downloading some other kdz specific to your phone model.
Please help me out
Ahmed Xperia p said:
Ok relax if you can connect in download mode 90% chances are your phone will be recovered.
Click to expand...
Click to collapse
Dear Brother,
the link you provided, i couldnt understand. I am almost new user and new in LG. Please help me out, If you tell me the steps, how to solve...then i will be very much grateful to you Brother.
Regards,
clickanu said:
Dear Brother,
the link you provided, i couldnt understand. I am almost new user and new in LG. Please help me out, If you tell me the steps, how to solve...then i will be very much grateful to you Brother.
Regards,
Click to expand...
Click to collapse
Just check first post of the given link . It's easy .
---------- Post added at 11:57 PM ---------- Previous post was at 11:52 PM ----------
what i understand is you successfully flashed jelly bean kdz but after that you are stuck in bootloop? If that is the case all you need is to wipe your phone and itll boot
how do i wipe the phone, cause there is no recovery mode found in my phone
Ahmed Xperia p said:
Just check first post of the given link . It's easy .
---------- Post added at 11:57 PM ---------- Previous post was at 11:52 PM ----------
what i understand is you successfully flashed jelly bean kdz but after that you are stuck in bootloop? If that is the case all you need is to wipe your phone and itll boot
Click to expand...
Click to collapse
I dont find any recovery mode in my phone to wipe and reboot...
and why it is not updated to kitkat through kdz, it is shown file extract error....Please help.
Sorry for bothering you.
regards and thanks.
Pleas switch off your phone. Press volume -- volume down key and press power button together. On screen display you will get option for hard reset your phone, click power button twice, then your phone will boot after 5 to 10 seconds after a hard reset..
clickanu said:
I dont find any recovery mode in my phone to wipe and reboot...
and why it is not updated to kitkat through kdz, it is shown file extract error....Please help.
Sorry for bothering you.
regards and thanks.
Click to expand...
Click to collapse
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
---------- Post added at 12:22 AM ---------- Previous post was at 12:19 AM ----------
cooljay5 said:
Pleas switch off your phone. Press volume -- volume down key and press power button together. On screen display you will get option for hard reset your phone, click power button twice, then your phone will boot after 5 to 10 seconds after a hard reset..
Click to expand...
Click to collapse
This is the most easiest way to fix .
Ahmed Xperia p said:
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
Click to expand...
Click to collapse
Extract file error could be because of a broken kdz or once a kdz larger than 1 gb is flashed using kdz updater it also gives this error
Thanks Seniors...Grateful....to You
Ahmed Xperia p said:
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
---------- Post added at 12:22 AM ---------- Previous post was at 12:19 AM ----------
This is the most easiest way to fix .
Extract file error could be because of a broken kdz or once a kdz larger than 1 gb is flashed using kdz updater it also gives this error
Click to expand...
Click to collapse
Another thing, now my phone doesnt show any IMEI no, and please suggest me how do i get it and how do i update the kitkat version now...can i root the phone after updating the kitkat or now?
Please suggest...You are just Great
Regards and Thanks,
clickanu said:
Another thing, now my phone doesnt show any IMEI no, and please suggest me how do i get it and how do i update the kitkat version now...can i root the phone after updating the kitkat or now?
Please suggest...You are just Great
Regards and Thanks,
Click to expand...
Click to collapse
No IMEI means you need to restore EFS backup ,which i doubt you did not make
I didnt know anything about EFS backup....!!! Is there anything wrong with my phone.!
Ahmed Xperia p said:
No IMEI means you need to restore EFS backup ,which i doubt you did not make
Click to expand...
Click to collapse
I dont know anything about EFS??? Please let me know and help me out Brother, You are the boss. How do i get it back? How do i remove the korean system softwares. Please help me out....Regards
signal working fine and phone recognizes sim card ? Check if imei is shown without sim ? Currently you're on which firmware and what firmware you flashed earlir?
Sent from my LG-E975 using XDA Premium 4 mobile app
Thanks Senior for your patience to reply....
Ahmed Xperia p said:
signal working fine and phone recognizes sim card ? Check if imei is shown without sim ? Currently you're on which firmware and what firmware you flashed earlir?
Sent from my LG-E975 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yees, Signal working fine and phone recognizes the sim card.
IMEI not shown without sim Dear Brother. Currently I am on version 4.1.2, jellybean,
I flashed with jellybeam F180S20d_00.kdz.
Please suggest me and help me out
Thanks and regards,
clickanu said:
Yees, Signal working fine and phone recognizes the sim card.
IMEI not shown without sim Dear Brother. Currently I am on version 4.1.2, jellybean,
I flashed with jellybeam F180S20d_00.kdz.
Please suggest me and help me out
Thanks and regards,
Click to expand...
Click to collapse
Another interesting thing is that, in my phone it is shown F180S but when i connect it to computer via usb, the LG support tool software shows it LGV500.
What about the matter Brother???
Thanks and Regards
If you've lost your imei without making EFS backup , you've lost it forever. There's no fix for this i guess. Best bet for you is use your phone as it is.
Sent from my LG-E975 using XDA Premium 4 mobile app
---------- Post added at 02:06 AM ---------- Previous post was at 02:05 AM ----------
You can try flashing stock kdz for your modle, it may help you but nit guaranteed.
Sent from my LG-E975 using XDA Premium 4 mobile app
Can i root my phone now or after updating to kitkat?
power button is broken.
Flashed an odin stock (tried multiple) and I m still getting stuck on samsung logo
with no power button, I cant get to recovery to wipe/reset
any ideas boys?
ordered the replacement power switch but it's a long wait for it to reach me. I not in the US currently
nabilbek said:
power button is broken.
Flashed an odin stock (tried multiple) and I m still getting stuck on samsung logo
with no power button, I cant get to recovery to wipe/reset
any ideas boys?
ordered the replacement power switch but it's a long wait for it to reach me. I not in the US currently
Click to expand...
Click to collapse
http://youtu.be/pqBgbN8NLjI
sounds crazy , but i did this to my sons t989 a year ago and still working-might be worth a try
Fasted12 said:
http://youtu.be/pqBgbN8NLjI
sounds crazy , but i did this to my sons t989 a year ago and still working-might be worth a try
Click to expand...
Click to collapse
tried a lot man
the button seems completely dead
nabilbek said:
tried a lot man
the button seems completely dead
Click to expand...
Click to collapse
you know, unless you have a touch recovery , getting there wont help with a bad power button
Fasted12 said:
you know, unless you have a touch recovery , getting there wont help with a bad power button
Click to expand...
Click to collapse
yep ... using latest twrp
but I dont think there is a way into recovery if you are unable to boot the phone and no power button
I need something like a odin flashable tar that wipes cache /resets (because this usually fixes the stuck on logo)
nabilbek said:
yep ... using latest twrp
but I dont think there is a way into recovery if you are unable to boot the phone and no power button
I need something like a odin flashable tar that wipes cache /resets (because this usually fixes the stuck on logo)
Click to expand...
Click to collapse
flashing anything with a fluky power button is very hazardous. If it goes off in the middle of something, your device could be toast.
I'd get it fixed before doing anything. if it can't be fixed....phone shopping time! [emoji106]
KJ said:
flashing anything with a fluky power button is very hazardous. If it goes off in the middle of something, your device could be toast.
I'd get it fixed before doing anything. if it can't be fixed....phone shopping time! [emoji106]
Click to expand...
Click to collapse
I ordered a new power switch but I am bad at waiting
nabilbek said:
I ordered a new power switch but I am bad at waiting
Click to expand...
Click to collapse
You're risking your phone flashing anything.
But its yours to do with as you wish. Just would suck to finally get that power button delivered....and not have a functioning phone to use it with.
nabilbek said:
I ordered a new power switch but I am bad at waiting
Click to expand...
Click to collapse
you could try installing adb http://forum.xda-developers.com/showthread.php?t=1853159
Fasted12 said:
you could try installing adb http://forum.xda-developers.com/showthread.php?t=1853159
Click to expand...
Click to collapse
I am aware and have adb. thing is phone is bricked after last update (stuck at logo)
so i can only get into download mode ....wish there was a way to get from download to recovery but I cant find any
without the use of the power button ofc ...
nabilbek said:
I am aware and have adb. thing is phone is bricked after last update (stuck at logo)
so i can only get into download mode ....wish there was a way to get from download to recovery but I cant find any
without the use of the power button ofc ...
Click to expand...
Click to collapse
sorry man, hope the button install goes well
hmm
Fasted12 said:
sorry man, hope the button install goes well
Click to expand...
Click to collapse
i have the same exact problem minus my power button, it works normal
and i get firmware upgrade encountered an issue
i get that screen when i normal boot it, try recovery, or download mode, everything results to firmware upgrade encountered an issue
not sure if i should post here with this or not, just letting you know
ovenbird said:
i have the same exact problem minus my power button, it works normal
and i get firmware upgrade encountered an issue
i get that screen when i normal boot it, try recovery, or download mode, everything results to firmware upgrade encountered an issue
not sure if i should post here with this or not, just letting you know
Click to expand...
Click to collapse
i guess the question is, can you get your phone to download mode...
download mode
Fasted12 said:
i guess the question is, can you get your phone to download mode...
Click to expand...
Click to collapse
it reaches download mode no matter what i do ( the firmware error is in the download mode )
the problem is while in download mode nothing recognizes it ( its not normal download mode )
Im getting this :
I cant post links but this is the image i can send you
cdn.droidviews.com/wp-content/uploads/2013/09/Firmware-upgrade-encountered-an-issue jpg
put a DOT in there
ovenbird said:
it reaches download mode no matter what i do ( the firmware error is in the download mode )
the problem is while in download mode nothing recognizes it ( its not normal download mode )
Im getting this :
I cant post links but this is the image i can send you
cdn.droidviews.com/wp-content/uploads/2013/09/Firmware-upgrade-encountered-an-issue jpg
put a DOT in there
Click to expand...
Click to collapse
if kies wont recognize, nor will odin-i dont know--try reposting maybe get some new views, sorry
ovenbird said:
i have the same exact problem minus my power button, it works normal
and i get firmware upgrade encountered an issue
i get that screen when i normal boot it, try recovery, or download mode, everything results to firmware upgrade encountered an issue
not sure if i should post here with this or not, just letting you know
Click to expand...
Click to collapse
this happened with me once. long long time ago
But I swear I cant remember why
here try this : https://www.youtube.com/watch?v=GbAJH_mL6N4
another well explained guide for solving using kies : http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
In case anyone doesn't know.....Odin won't see your device if kies is running. You need to kill the kies process. Make sure there's no mention of it in windows task manager.
Then, if your drivers are installed right....Odin should see your phone.
Also, I've always had the best luck with Odin 3.04.
---------- Post added at 07:31 PM ---------- Previous post was at 07:30 PM ----------
Or uninstall kies... I never once used it for anything.
KJ said:
In case anyone doesn't know.....Odin won't see your device if kies is running. You need to kill the kies process. Make sure there's no mention of it in windows task manager.
Then, if your drivers are installed right....Odin should see your phone.
Also, I've always had the best luck with Odin 3.04.
---------- Post added at 07:31 PM ---------- Previous post was at 07:30 PM ----------
Or uninstall kies... I never once used it for anything.
Click to expand...
Click to collapse
exactly ... kies is utter ****!
I would never recommend it too. A pure waste of time
Also, see what your phone shows as in windows device manager. If its listed with an "!" on it....the drivers may need to be reinstalled. If windows doesn't see it correctly, either will Odin. ?
Problem solved, I reinstalled drivers.
That simple.
Thanks for the video btw, I even added the guy from youtube channel
I tried to install a custom rom from here : http://forum.xda-developers.com/opt.../vupmp-g-pro-sg3-v3-0-final-lg-g-pro-t2867783
But now I am stuck in a boot loop i think ( it won't do anything but showing me the lg sign )
I tried downloading the kdz file but there isn't 1 site for the Dutch one @ NLD/Netherlands (tbh there is but all the links are down)
I can't boot into the cwm either and I also can't do hard reset...
Can anyone tell me what to do?
Having the same issue
someone please help
The answer
Ericrsmssn said:
Having the same issue
someone please help
Click to expand...
Click to collapse
I found a sollution for this.
Download LG Mobile Support tool ( http://lg-support-tool.en.lo4d.com/ )
Put your phone in download mode "Hold the VolumeUP + VolumeDOWN Button and plug in the usb cable from your device to your pc [DON'T PRESS THE POWER BUTTON], let it install the drivers. ( To be sure it found you'r drivers, you should press on : Install Drivers
Once you installed your driver of the e98x ( mine is e986 ) Press on Extra functions - Upgrade-error recovery.
Make sure it found your device and make sure you are connected to the internet "IT WONT WORK WITHOUT INTERNET CONNECTION"
Launch it and it will reset your phone to new ( it did for me )
Don't get mad if you lose you're data T_T this worked for me so it should work for you to
bagslayer said:
I found a sollution for this.
Download LG Mobile Support tool ( http://lg-support-tool.en.lo4d.com/ )
Put your phone in download mode "Hold the VolumeUP + VolumeDOWN Button and plug in the usb cable from your device to your pc [DON'T PRESS THE POWER BUTTON], let it install the drivers. ( To be sure it found you'r drivers, you should press on : Install Drivers
Once you installed your driver of the e98x ( mine is e986 ) Press on Extra functions - Upgrade-error recovery.
Make sure it found your device and make sure you are connected to the internet "IT WONT WORK WITHOUT INTERNET CONNECTION"
Launch it and it will reset your phone to new ( it did for me )
Don't get mad if you lose you're data T_T this worked for me so it should work for you to
Click to expand...
Click to collapse
Nope, aint working since it says that my battery isn't fully charged. but i even tried the battery of a friend of mine and it says the same..
are you able to enter into the recovery by pressing pOWER + VOLUME UP ? the device must be turned off and to be sure, pull battery and charging cable off and put battery back to do the pressing combo.
bagslayer said:
I found a sollution for this.
Download LG Mobile Support tool ( http://lg-support-tool.en.lo4d.com/ )
Put your phone in download mode "Hold the VolumeUP + VolumeDOWN Button and plug in the usb cable from your device to your pc [DON'T PRESS THE POWER BUTTON], let it install the drivers. ( To be sure it found you'r drivers, you should press on : Install Drivers
Once you installed your driver of the e98x ( mine is e986 ) Press on Extra functions - Upgrade-error recovery.
Make sure it found your device and make sure you are connected to the internet "IT WONT WORK WITHOUT INTERNET CONNECTION"
Launch it and it will reset your phone to new ( it did for me )
Don't get mad if you lose you're data T_T this worked for me so it should work for you to
Click to expand...
Click to collapse
fosunite said:
are you able to enter into the recovery by pressing pOWER + VOLUME UP ? the device must be turned off and to be sure, pull battery and charging cable off and put battery back to do the pressing combo.
Click to expand...
Click to collapse
I did that.. but no luck :S I am able to get into recovery mode but it keeps saying my battery is to empty
bagslayer said:
I tried to install a custom rom from here : http://forum.xda-developers.com/opt.../vupmp-g-pro-sg3-v3-0-final-lg-g-pro-t2867783
But now I am stuck in a boot loop i think ( it won't do anything but showing me the lg sign )
I tried downloading the kdz file but there isn't 1 site for the Dutch one @ NLD/Netherlands (tbh there is but all the links are down)
I can't boot into the cwm either and I also can't do hard reset...
Can anyone tell me what to do?
Click to expand...
Click to collapse
you told that u cannot boot into cwm which sounds pretty serious...
bagslayer said:
I did that.. but no luck :S I am able to get into recovery mode but it keeps saying my battery is to empty
Click to expand...
Click to collapse
how do you get into the recovery mode?
please do not mistake cwm and recovery mode, because cwm is your recovery mode.
so please tell what steps you were using so that we can help you
Sent from my LG-E980 using XDA Free mobile app
well, I tried powering off the phone----holding volume DOWN+UP and plugging the usb into my lg.
I also tried that while I took out my entire battery but the same results
Ehm guys, I would like to know how to get my phone back to the stock image. I am still stuck on the error which says my battery is empty when I try to restore it but I quess it is because my phone thinks it is en E980 while it is an e986
Or it is because I flashed Madmacks kernel or smthing. Any solutions? :C I just wanna go back to the stock image D:
bagslayer said:
Ehm guys, I would like to know how to get my phone back to the stock image. I am still stuck on the error which says my battery is empty when I try to restore it but I quess it is because my phone thinks it is en E980 while it is an e986
Or it is because I flashed Madmacks kernel or smthing. Any solutions? :C I just wanna go back to the stock image D:
Click to expand...
Click to collapse
1. connect ur phn to ur pc and install flashtool from step 4.
2.install drivers of ur mbl
3.download the kdz firmware file u want from here http://www.lg-phone-firmware.com/index.php?id_mod=25
4.now follow the steps provided in the thread http://forum.xda-developers.com/show....php?t=2797190
5.its better to choose cse flash as i did that(when i chosen normal flash,the update stopped saying some error.so disconneted my net connection and tried again.it worked)
6.if u follow the above steps correctly,ull get ur phn back within 6 minutes.
(sorry for my english) and please let me know if ur phn is back.
hope this will help..
krishna13 said:
1. connect ur phn to ur pc and install flashtool from step 4.
2.install drivers of ur mbl
3.download the kdz firmware file u want from here http://www.lg-phone-firmware.com/index.php?id_mod=25
4.now follow the steps provided in the thread http://forum.xda-developers.com/show....php?t=2797190
5.its better to choose cse flash as i did that(when i chosen normal flash,the update stopped saying some error.so disconneted my net connection and tried again.it worked)
6.if u follow the above steps correctly,ull get ur phn back within 6 minutes.
(sorry for my english) and please let me know if ur phn is back.
hope this will help..
Click to expand...
Click to collapse
The link of Part 4 isn't working :C
could you upload a new link?
RTS on GPro
XDA already has a nice thread for doing a Return to Stock that I have used more than once and has worked every time.
http://forum.xda-developers.com/showthread.php?t=2302660
geekboy01 said:
XDA already has a nice thread for doing a Return to Stock that I have used more than once and has worked every time.
http://forum.xda-developers.com/showthread.php?t=2302660
Click to expand...
Click to collapse
that is for the E980, will it work for the E986 to?
bagslayer said:
that is for the E980, will it work for the E986 to?
Click to expand...
Click to collapse
Unfortunately I don't have the 986 and didn't catch that was your specific model. If you're in a bricked mode already and have access to your original FW then its worth a shot for recovery. YMMV
geekboy01 said:
XDA already has a nice thread for doing a Return to Stock that I have used more than once and has worked every time.
http://forum.xda-developers.com/showthread.php?t=2302660
Click to expand...
Click to collapse
geekboy01 said:
Unfortunately I don't have the 986 and didn't catch that was your specific model. If you're in a bricked mode already and have access to your original FW then its worth a shot for recovery. YMMV
Click to expand...
Click to collapse
Mine is not bricked yet D: I'm scared ;-;
bagslayer said:
The link of Part 4 isn't working :C
could you upload a new link?
Click to expand...
Click to collapse
so sorry for my late rply.
regarding instructions of step 4 follow this link. http://forum.xda-developers.com/showthread.php?t=2432476
but dwnld the kdz for ur lg g pro.
that guide on the link these guys have provided above should work for all the G Pro variants, just download the kdz file for your specific model. try this link http://www.lg-phone-firmware.com/index.php
be patient and have time reading, everything you need is on this forum
---------- Post added at 05:10 PM ---------- Previous post was at 04:59 PM ----------
also try this http://forum.xda-developers.com/showthread.php?t=2420219
follow the first guide "KDZ Flashing Method"
make sure you have your internet connection disabled when you start LG Flash Tool and that you are using Windows 7, i dont know if it will work on windows 8, but im sure it wont work on winXP.
PLEASE HELP ME I ACCIDENTLY deleted my os now all i can see is lg logo and it goes and nothing comes after that.the power buttons to boot in to recovery mode is in vain and mypc does not recognise my device .if i could go to boot menu i culd do something but it wont go please help me please please !! :crying:
Enter download mode and install new firmware. It will take about 30 mins.
Sent from my LG-F240K using XDA Free mobile app
akshaybose said:
PLEASE HELP ME I ACCIDENTLY deleted my os now all i can see is lg logo and it goes and nothing comes after that.the power buttons to boot in to recovery mode is in vain and mypc does not recognise my device .if i could go to boot menu i culd do something but it wont go please help me please please !! :crying:
Click to expand...
Click to collapse
Turn on you phone while holding both volumn + power buttons. If that doesn't open the download menu, you need to take out the battery; connect usb cord to your device, while holding all the buttons (volumes and power) plug the other end USB cord to your Pc, and put the battery back in, then let go of the buttons. Keep try both of those methods, and you should be able to get the download menu to flash the firmware. Otherwise you can't do anything.
hawkwind212 said:
Turn on you phone while holding both volumn + power buttons. If that doesn't open the download menu, you need to take out the battery; connect usb cord to your device, while holding all the buttons (volumes and power) plug the other end USB cord to your Pc, and put the battery back in, then let go of the buttons. Keep try both of those methods, and you should be able to get the download menu to flash the firmware. Otherwise you can't do anything.
Click to expand...
Click to collapse
i tried that with lg flash tools but i think i have some prob with it . can you provide a download link for the software to flash the firm ware ?
akshaybose said:
i tried that with lg flash tools but i think i have some prob with it . can you provide a download link for the software to flash the firm ware ?
Click to expand...
Click to collapse
There are 2-3 threads on re-flashing complete stock using flash tools. Here is one: http://forum.xda-developers.com/showthread.php?t=2764076. Search also for others and see which works best for you. The flash back is no big deal, so have no fear! (Turn off internet when using LG Flash tools, or sometime ET calls home !
LG Optimus G Pro E988 Bricked Issue
Hi there my friend I have bought LG Optimus G Pro E988 recently but 4G LTE was not working on it so I tried to update its ROM and while doing it unfortunately it bricked. Now when ever I tried to power on my phone it shows LG logo and reboot again and again and nothing pop up i tried many things with download mode but it does not work and it is also not going in recovery mode and I cant find its bootloader. Could anyone please help me this
Deleted.
---------- Post added at 03:16 AM ---------- Previous post was at 03:07 AM ----------
Adnan323 said:
Hi there my friend I have bought LG Optimus G Pro E988 recently but 4G LTE was not working on it so I tried to update its ROM and while doing it unfortunately it bricked. Now when ever I tried to power on my phone it shows LG logo and reboot again and again and nothing pop up i tried many things with download mode but it does not work and it is also not going in recovery mode and I cant find its bootloader. Could anyone please help me this
Click to expand...
Click to collapse
Ok....for E988 go here http://forum.xda-developers.com/showthread.php?t=2754294
Good luck!
Sent from my GT-N8013 using XDA Free mobile app
chappatti said:
Deleted.
---------- Post added at 03:16 AM ---------- Previous post was at 03:07 AM ----------
Ok....for E988 go here http://forum.xda-developers.com/showthread.php?t=2754294
Good luck!
Sent from my GT-N8013 using XDA Free mobile app
Click to expand...
Click to collapse
Dear Friend KDZ file is not found in the thread
Adnan323 said:
Dear Friend KDZ file is not found in the thread
Click to expand...
Click to collapse
Here it is from hyelton's thread http://storagecow.eu/index.php?dir=Xda/LG+Optimus+G+Pro/Stock/
All stock roms. Explore the website menus....lots of good stuff.
Sent from my GT-N8013 using XDA Free mobile app
chappatti said:
There are 2-3 threads on re-flashing complete stock using flash tools. Here is one: http://forum.xda-developers.com/showthread.php?t=2764076. Search also for others and see which works best for you. The flash back is no big deal, so have no fear! (Turn off internet when using LG Flash tools, or sometime ET calls home !
Click to expand...
Click to collapse
thank you for the thread it really did help me out thanks bro :fingers-crossed:
phone wont switch on
oh something bad happend while flashing my device i used a e980 stock rom to flash and it showed fail , and after that the phone wont switch on like before it wont switch on it seems i tried charging but even if i plug in the device charger the phone wont switch on. now i cant even acces download mode please help me please :crying: :crying: its been a month nd i am not succesful in flashing my device.. anybody please help me
Have you tried all the methods I mentioned in earlier post to turn on the download mode? Try them first, and if those methods don't work, then you can plug your phone to a PC and look under the device manager what your phone appears as. If it's recognize as a lg device, then you should keep trying those methods I've mentioned until you get the download mode. However, if your phone is not recognize at all, or it's been seen as something that has word Qualcomm qdhs something in it, then phone is hard bricked. If that is the case, then I can only suggest you try the following link, get the jtag service, else get yourself another phone. Because hard brick, if you have never heard the word before, it means just how it sounds, you got a hard brick on your hand.
http://forum.xda-developers.com/showthread.php?t=2829684
hawkwind212 said:
Have you tried all the methods I mentioned in earlier post to turn on the download mode? Try them first, and if those methods don't work, then you can plug your phone to a PC and look under the device manager what your phone appears as. If it's recognize as a lg device, then you should keep trying those methods I've mentioned until you get the download mode. However, if your phone is not recognize at all, or it's been seen as something that has word Qualcomm qdhs something in it, then phone is hard bricked. If that is the case, then I can only suggest you try the following link, get the jtag service, else get yourself another phone. Because hard brick, if you have never heard the word before, it means just how it sounds, you got a hard brick on your hand.
http://forum.xda-developers.com/showthread.php?t=2829684
Click to expand...
Click to collapse
yea it got hard bricked :crying: ill try my bestits been a month n i have lost all my hope
[/COLOR]
akshaybose said:
yea it got hard bricked :crying: ill try my bestits been a month n i have lost all my hope
Click to expand...
Click to collapse
Dud you try the hard brick fix link post from hakwind? You need Ubuntu but you can easily install it on any pc....
Sent from my GT-N8013 using XDA Free mobile app
chappatti said:
[/COLOR]
Dud you try the hard brick fix link post from hakwind? You need Ubuntu but you can easily install it on any pc....
Sent from my GT-N8013 using XDA Free mobile app
Click to expand...
Click to collapse
yea but i ve been tryin to download the india e988 kdz file from storagecow but its soo slow that it shows it takes almost 2 days to download nd am not at home am residing in hostel so i can only download thru college wifi .so first i have to download ! but it takes a hell a lot of time
akshaybose said:
yea but i ve been tryin to download the india e988 kdz file from storagecow but its soo slow that it shows it takes almost 2 days to download nd am not at home am residing in hostel so i can only download thru college wifi .so first i have to download ! but it takes a hell a lot of time
Click to expand...
Click to collapse
Yes, in India the speed barely goes above -80 Kbps. Just bad....?
Sent from my GT-N8013 using XDA Free mobile app
chappatti said:
Yes, in India the speed barely goes above -80 Kbps. Just bad....?
Sent from my GT-N8013 using XDA Free mobile app[/QUOTE
do you have any alternate download link still i am not sucessful in downloading it. am using an e988 korean made . if you bychance find any google drive files please let me know thank you
Click to expand...
Click to collapse
chappatti said:
Yes, in India the speed barely goes above -80 Kbps. Just bad....?
Sent from my GT-N8013 using XDA Free mobile app
Click to expand...
Click to collapse
i cannot extract my kdz file using the software mentioned in the earlier thread
i gave my phone to service centre they told they wont repair coz its a korean made e988 ! can you post any link that has a korean e988 stock kdz pleaze :crying: